Use NV_ENCODE_NATIVE for nvlist encoding variable instead of 0.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8653
Use either SEEK_* or 0,1,2..., but not both.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8656
This patch fixes 2 issues with the DMU free throttle implemented
in dmu_free_long_range(). The first issue is that get_next_chunk()
was calculating the number of L1 blocks the free would dirty
incorrectly. In some cases involving extremely large files, this
code would greatly overestimate the number of effected L1 blocks,
causing excessive calls to txg_wait_open(). This patch corrects
the calculation.
The second issue is that the free throttle uses the total number
of free'd blocks in all (open, quiescing, and syncing) txgs to
determine whether to throttle. This causes large frees (such as
those created by the first issue) to cause 4 txg syncs before
any further frees were allowed to proceed. This patch ensures
that the accounting is done entirely in a per-txg fashion, so
that frees from a given txg don't affect those that immediately
follow it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8655
Unused since 5649246dd3("Remove znode move functionality"),
and ZNODE_STAT_ADD() will never be needed.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8636
These aren't unused.
`flag` in zfs_create() also isn't to indicate large file.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8635
1. Support QAT when ZFS is root file-system:
When ZFS module is loaded before QAT started, the QAT can
be started again in post-process, e.g.:
echo 0 > /sys/module/zfs/parameters/zfs_qat_compress_disable
echo 0 > /sys/module/zfs/parameters/zfs_qat_encrypt_disable
echo 0 > /sys/module/zfs/parameters/zfs_qat_checksum_disable
2. Verify alder checksum of the de-compress result
3. Allocate Digest, IV and AAD buffer in physical contiguous
memory by QAT_PHYS_CONTIG_ALLOC.
4. Update the documentation for zfs_qat_compress_disable,
zfs_qat_checksum_disable, zfs_qat_encrypt_disable.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Chengfeix Zhu <chengfeix.zhu@intel.com>
Closes#8323Closes#8610
This replaces empty for loops with while loops to make the code easier
to read.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: github.com/dcb314
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#6681Closes#6682Closes#6683Closes#8623
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#8626
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#8626
When receiving a raw send stream only reallocated objects
whose contents were not freed by the standard indicators
should call dmu_free_long_range().
Furthermore, if calling dmu_free_long_range() is required
then the objects current block size must be used and not
the new block size.
Two additional test cases were added to provided realistic
test coverage for processing reallocated objects which are
part of a raw receive.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8528Closes#8607
This patch simply up cleans up a nit and corrects an error message
issue that were introduced in the Multiple DVA scrub patch.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8619
When receiving an object to a previously allocated interior slot
the new object should be "allocated" by setting DMU_NEW_OBJECT,
not "reallocated" with dnode_reallocate(). For resilience verify
the slot is free as required in case the stream is malformed.
Add a test case to generate more realistic incremental send streams
that force reallocation to occur during the receive.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8067Closes#8614
Fix style issue for 'tx->tx_txg&TXG_MASK'. There should be white
space around the '&' character. Split the dnode_reallocate() ASSERT
to make it more readable to clearly separate the checks.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8606
The error path in zio_crypt_key_unwrap would call zio_crypt_key_destroy which
calls rw_destroy(&key->zk_salt_lock); which has not yet been initialized.
We move the rw_init() call to the start of zio_crypt_key_unwrap instead.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#8604Closes#8605
The bulk[] array index, count, must be reset per-iteration in order to
not overwrite the stack.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#8072Closes#8597Closes#8601
d12614521a("Fixes for procfs files backed by linked lists")
uses PDE_DATA(), but since PDE_DATA() (public interface which
replaced old public interface PDE()) first appeared in upstream
kernel 3.10, it lacks visible local definition for kernel < 3.10.
Move the local PDE_DATA() definition to a ZoL header, to unbreak
build on kernel < 3.10.
--
module/spl/spl-procfs-list.c: In function 'procfs_list_open':
module/spl/spl-procfs-list.c:166: error: implicit declaration of function 'PDE_DATA'
module/spl/spl-procfs-list.c:166: warning: assignment makes pointer from integer without a cast
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8599
This partially reverts commit 5dbf8b4ed. This change resolved
the issues observed with truncated files in raw sends. However,
the required changes to dnode_allocate() introduced a regression
for non-raw streams which needs to be understood.
The additional debugging improvements from the original patch
were not reverted.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7378
Issue #8528
Issue #8540
Issue #8565Close#8584
When a pool is initially created (by `zpool create`), predictive
prefetch is inadvertently disabled, until the pool is export/import-ed,
or the machine is rebooted.
When device removal was introduced, we added some code to disable
predictive prefetching until indirect vdevs have been loaded. This
resulted in the "default state" of prefetch being disabled, until we
proactively enable it after indirect vdevs are loaded. Unfortunately
this resulted in a few bugs where in some code paths we neglect to
enable predictive prefetch. The first of these was fixed by
20507534d4
This commit fixes another case where we also need to explicitly enable
predictive prefetch, when the pool is initially created.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8577
The features.kernel layout should match features.pool.
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#8566
There are several places where we use zfs_dbgmsg and %p to
print pointers. In the Linux kernel, these values obfuscated
to prevent information leaks which means the pointers aren't
very useful for debugging crash dumps. We decided to restrict
the permissions of dbgmsg (and some other kstats while we were
at it) and print pointers with %px in zfs_dbgmsg as well as
spl_dumpstack
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
Closes#8467Closes#8476
Callers of txg_wait_open() which set should_quiesce=B_TRUE should be
accounted for as iowait time. Otherwise, the caller is understood
to be idle and cv_wait_sig() is used to prevent incorrectly inflating
the system load average.
Similarly txg_wait_wait() has been updated to use cv_wait_io() to
be accounted against iowait.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8550Closes#8558
UNMAP/TRIM support is a frequently-requested feature to help
prevent performance from degrading on SSDs and on various other
SAN-like storage back-ends. By issuing UNMAP/TRIM commands for
sectors which are no longer allocated the underlying device can
often more efficiently manage itself.
This TRIM implementation is modeled on the `zpool initialize`
feature which writes a pattern to all unallocated space in the
pool. The new `zpool trim` command uses the same vdev_xlate()
code to calculate what sectors are unallocated, the same per-
vdev TRIM thread model and locking, and the same basic CLI for
a consistent user experience. The core difference is that
instead of writing a pattern it will issue UNMAP/TRIM commands
for those extents.
The zio pipeline was updated to accommodate this by adding a new
ZIO_TYPE_TRIM type and associated spa taskq. This new type makes
is straight forward to add the platform specific TRIM/UNMAP calls
to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are
handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs.
This makes it possible to largely avoid changing the pipieline,
one exception is that TRIM zio's may exceed the 16M block size
limit since they contain no data.
In addition to the manual `zpool trim` command, a background
automatic TRIM was added and is controlled by the 'autotrim'
property. It relies on the exact same infrastructure as the
manual TRIM. However, instead of relying on the extents in a
metaslab's ms_allocatable range tree, a ms_trim tree is kept
per metaslab. When 'autotrim=on', ranges added back to the
ms_allocatable tree are also added to the ms_free tree. The
ms_free tree is then periodically consumed by an autotrim
thread which systematically walks a top level vdev's metaslabs.
Since the automatic TRIM will skip ranges it considers too small
there is value in occasionally running a full `zpool trim`. This
may occur when the freed blocks are small and not enough time
was allowed to aggregate them. An automatic TRIM and a manual
`zpool trim` may be run concurrently, in which case the automatic
TRIM will yield to the manual TRIM.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Contributions-by: Tim Chase <tim@chase2k.com>
Contributions-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8419Closes#598
This patch fixes a few issues with raw receives involving
truncated files:
* dnode_reallocate() now calls dnode_set_blksz() instead of
dnode_setdblksz(). This ensures that any remaining dbufs with
blkid 0 are resized along with their containing dnode upon
reallocation.
* One of the calls to dmu_free_long_range() in receive_object()
needs to check that the object it is about to free some contents
or hasn't been completely removed already by a previous call to
dmu_free_long_object() in the same function.
* The same call to dmu_free_long_range() in the previous point
needs to ensure it uses the object's current block size and
not the new block size. This ensures the blocks of the object
that are supposed to be freed are completely removed and not
simply partially zeroed out.
This patch also adds handling for DRR_OBJECT_RANGE records to
dprintf_drr() for debugging purposes.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7378Closes#8528
Make a local copy of the vd_path and preserve the removal error
for use in spa_history_log_internal(). This is required because
after spa_vdev_exit() there is nothing preventing the vdev state
from changing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes#8522
Added missing remove of detachable VDEV from txg's DTL list
to avoid use-after-free for the split VDEV
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Roman Strashkin <roman.strashkin@nexenta.com>
Closes#5565Closes#7856
ZFS supports O_RSYNC for read operations and when specified will ensure
the same level of data integrity that O_DSYNC and O_SYNC provides for
writes. O_RSYNC by itself has no effect so it must be combined with
either O_DSYNC or O_SYNC. However, many platforms don't support O_RSYNC
and have mapped O_SYNC to mean O_RSYNC within ZFS. This is incorrect
and causes unnecessary calls to zil_commit. Only platforms which
support O_RSYNC should implement the zil_commit functionality in the
read code path.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#8523
When Multihost is enabled, and a pool is imported, uberblock writes
include ub_mmp_delay to allow an importing node to calculate the
duration of an activity test. This value, is not enough information.
If zfs_multihost_fail_intervals > 0 on the node with the pool imported,
the safe minimum duration of the activity test is well defined, but does
not depend on ub_mmp_delay:
zfs_multihost_fail_intervals * zfs_multihost_interval
and if zfs_multihost_fail_intervals == 0 on that node, there is no such
well defined safe duration, but the importing host cannot tell whether
mmp_delay is high due to I/O delays, or due to a very large
zfs_multihost_interval setting on the host which last imported the pool.
As a result, it may use a far longer period for the activity test than
is necessary.
This patch renames ub_mmp_sequence to ub_mmp_config and uses it to
record the zfs_multihost_interval and zfs_multihost_fail_intervals
values, as well as the mmp sequence. This allows a shorter activity
test duration to be calculated by the importing host in most situations.
These values are also added to the multihost_history kstat records.
It calculates the activity test duration differently depending on
whether the new fields are present or not; for importing pools with
only ub_mmp_delay, it uses
(zfs_multihost_interval + ub_mmp_delay) * zfs_multihost_import_intervals
Which results in an activity test duration less sensitive to the leaf
count.
In addition, it makes a few other improvements:
* It updates the "sequence" part of ub_mmp_config when MMP writes
in between syncs occur. This allows an importing host to detect MMP
on the remote host sooner, when the pool is idle, as it is not limited
to the granularity of ub_timestamp (1 second).
* It issues writes immediately when zfs_multihost_interval is changed
so remote hosts see the updated value as soon as possible.
* It fixes a bug where setting zfs_multihost_fail_intervals = 1 results
in immediate pool suspension.
* Update tests to verify activity check duration is based on recorded
tunable values, not tunable values on importing host.
* Update tests to verify the expected number of uberblocks have valid
MMP fields - fail_intervals, mmp_interval, mmp_seq (sequence number),
that sequence number is incrementing, and that uberblock values match
tunable settings.
Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7842
In addition to dsl_dataset_evict_async() releasing a hold, there is
an error case in dsl_dataset_hold_obj() which had missed 4 additional
release calls. This was introduced in a1d477c24.
openzfsonosx-commit: https://github.com/openzfsonosx/zfs/commit/63ff7f1c
Authored by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8517
If the buffer 'digest_buffer' is allocated in the qat_checksum()
stack, it can't ensure that the address is physically contiguous,
and the DMA result of the buffer may be handled incorrectly.
Using QAT_PHYS_CONTIG_ALLOC() ensures a physically
contiguous allocation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Chengfei, Zhu <chengfeix.zhu@intel.com>
Closes#8323Closes#8521
Update the dirty check in dmu_offset_next() such that dnode's
are only considered dirty for the purpose or reporting holes
when there are pending data blocks or frees to be synced. This
ensures that when there are only metadata updates to be synced
(atime) that holes are reported.
Reviewed-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6958Closes#8505
As it turns out, on the Windows platform when rw_init() is called
(rather its bedrock call ExInitializeResourceLite) it is placed on
an active-list of locks, and is removed at rw_destroy() time.
dnode_move() has logic to copy over the old-dnode to new-dnode,
including calling dmu_zfetch_init(new-dnode). But due to the missing
dmu_zfetch_fini(old-dnode), kmem will call dnode_dest() to release the
memory (and in debug builds fill pattern 0xdeadbeef) over the Windows
active-lock's prev/next list pointers, making Windows sad.
But on other platforms, the contents of dmu_zfetch_fini() is one
call to list_destroy() and one to rw_destroy(), which is effectively
a no-op call and is not required. This commit is mostly for
"correctness" and can be skipped there.
Porting Notes:
* This leak exists on Linux but currently can never happen because
the dnode_move() functionality is not supported.
openzfsonosx-commit: openzfsonosx/zfs@d95fe517
Authored by: Julian Heuking <JulianH@beckhoff.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#8519
When destroying an arc_buf_hdr_t its identity cannot be discarded
until it is entirely undiscoverable. This not only includes being
unhashed, but also being removed from the l2arc header list.
Discarding the header's identify prematurely renders the hash
lock useless because it will always hash to bucket zero.
This change resolves a race with l2arc_evict() by discarding the
identity after it has been removed from the l2arc header list.
This ensures either the header is not on the list or contains
the correct identify.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7688Closes#8144
Currently, there is an issue in the sequential scrub code which
prevents self healing from working in some cases. The scrub code
will split up all DVA copies of a bp and issue each of them
separately. The problem is that, since each of the DVAs is no
longer associated with the others, the self healing code doesn't
have the opportunity to repair problems that show up in one of the
DVAs with the data from the others.
This patch fixes this issue by ensuring that all IOs issued by the
sequential scrub code include all DVAs. Initially, only the first
DVA of each is attempted. If an issue arises, the IO is retried
with all available copies, giving the self healing code a chance
to correct the issue.
To test this change, this patch also adds the ability for zinject
to specify individual DVAs to inject read errors into. We then
add a new test case that utilizes this functionality to ensure
scrubs and self-healing reads can handle and transparently fix
issues with individual copies of blocks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8453
The number of IO and checksum events should match the number of errors
seen in zpool status. Previously there was a mismatch between the
two counts because zpool status would only count unrecovered errors,
while zpool events would get an event for *all* errors (recovered or
not). This lead to situations where disks could be faulted for
"too many errors", while at the same time showing zero errors in zpool
status.
This fixes the zpool status error counters to increment at the same
times we post the error events.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#4851Closes#7817
This patch simply fixes some small memory leaks that can happen
during error handling in zfsvfs_create_impl(). If the function
fails, it frees all the memory / references it created.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8490
This patch attempts to address some user concerns that have arisen
since errata 4 was introduced.
* The errata warning has been made less scary for users without
any encrypted datasets.
* The errata warning now clears itself without a pool reimport if
the bookmark_v2 feature is enabled and no encrypted datasets
exist.
* It is no longer possible to create new encrypted datasets without
enabling the bookmark_v2 feature, thus helping to ensure that the
errata is resolved.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue ##8308
Closes#8504
Before sequential scrub patches ZFS never aggregated I/Os above 128KB.
Sequential scrub bumped that to 1MB, supposedly to reduce number of
head seeks for spinning disks. But for SSDs it makes little to no
sense, especially on FreeBSD, where due to MAXPHYS limitation device
will likely still see bunch of 128KB I/Os instead of one large.
Having more strict aggregation limit for SSDs allows to avoid
allocation of large memory buffer and copy to/from it, that is a
serious problem when throughput reaches gigabytes per second.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#8494
Currently, there is an issue in the raw receive code where
raw receives are allowed to happen on top of previously
non-raw received datasets. This is a problem because the
source-side dataset doesn't know about how the blocks on
the destination were encrypted. As a result, any MAC in
the objset's checksum-of-MACs tree that is a parent of both
blocks encrypted on the source and blocks encrypted by the
destination will be incorrect. This will result in
authentication errors when we decrypt the dataset.
This patch fixes this issue by adding a new check to the
raw receive code. The code now maintains an "IVset guid",
which acts as an identifier for the set of IVs used to
encrypt a given snapshot. When a snapshot is raw received,
the destination snapshot will take this value from the
DRR_BEGIN payload. Non-raw receives and normal "zfs snap"
operations will cause ZFS to generate a new IVset guid.
When a raw incremental stream is received, ZFS will check
that the "from" IVset guid in the stream matches that of
the "from" destination snapshot. If they do not match, the
code will error out the receive, preventing the problem.
This patch requires an on-disk format change to add the
IVset guids to snapshots and bookmarks. As a result, this
patch has errata handling and a tunable to help affected
users resolve the issue with as little interruption as
possible.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8308
This patch adds the bookmark v2 feature to the on-disk format. This
feature will be needed for the upcoming redacted sends and for an
upcoming fix that for raw receives. The feature is not currently
used by any code and thus this change is a no-op, aside from the
fact that the user can now enable the feature.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #8308
Currently, the receive code can create an unreadable dataset from
a correct raw send stream. This is because it is currently
impossible to set maxblkid to a lower value without freeing the
associated object. This means truncating files on the send side
to a non-0 size could result in corruption. This patch solves this
issue by adding a new 'force' flag to dnode_new_blkid() which will
allow the raw receive code to force the DMU to accept the provided
maxblkid even if it is a lower value than the existing one.
For testing purposes the send_encrypted_files.ksh test has been
extended to include a variety of truncated files and multiple
snapshots. It also now leverages the xattrtest command to help
ensure raw receives correctly handle xattrs.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8168Closes#8487
Most of the zfs_arc_* module parameters do not have their values used by
the ARC code directly. Instead, there is a function, arc_tuning_update,
which is called during module initialization and periodically
thereafter, whose job is to fetch the module parameter values, clamp/
limit them appropriately, and then assign those values to a separate set
of internal variables that are actually referenced by the ARC code.
Commit 3ec34e55 featured an overhaul of arc_reclaim_thread, which is the
former location where the post-init-time calls to arc_tuning_update
would occur. The rework split the work previously done by the
arc_reclaim_thread into a pair of replacement threads; and
unfortunately, the call to arc_tuning_update fell through the cracks and
was lost in the reorganization.
This meant that changing almost any ARC-related zfs module parameter via
/sys/module/zfs/parameters/ would result in the module parameter value
itself appearing to change; however the modification would not actually
propagate to the ARC code and have any real effect.
This commit reinstates the post-init-time call to arc_tuning_update. It
is now called during arc_adjust_cb_check; this should be equivalent to
its former call location in arc_reclaim_thread.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Justin Gottula <justin@jgottula.com>
Closes#8405Closes#8463
This patch modifies the zfs_ioc_snapshot_list_next() ioctl to enable it
to take input parameters that alter the way looping through the list of
snapshots is performed. The idea here is to restrict functions that
throw away some of the snapshots returned by the ioctl to a range of
snapshots that these functions actually use. This improves efficiency
and execution speed for some rollback and send operations.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8077
Resolve a vdev_initialize crash uncovered by ztest. Similar
to when starting a new initialization verify that a removal
is not in progress. Additionally, do not restart when the
thread already exists. This check is now congruent with the
POOL_INITIALIZE_DO handling in spa_vdev_initialize_impl().
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8477
Instead of choosing a leaf vdev quasi-randomly, by starting at the root
vdev and randomly choosing children, rotate over leaves to issue MMP
writes. This fixes an issue in a pool whose top-level vdevs have
different numbers of leaves.
The issue is that the frequency at which individual leaves are chosen
for MMP writes is based not on the total number of leaves but based on
how many siblings the leaves have.
For example, in a pool like this:
root-vdev
+------+---------------+
vdev1 vdev2
| |
| +------+-----+-----+----+
disk1 disk2 disk3 disk4 disk5 disk6
vdev1 and vdev2 will each be chosen 50% of the time. Every time vdev1
is chosen, disk1 will be chosen. However, every time vdev2 is chosen,
disk2 is chosen 20% of the time. As a result, disk1 will be sent 5x as
many MMP writes as disk2.
This may create wear issues in the case of SSDs. It also reduces the
effectiveness of MMP as it depends on the writes being evenly
distributed for the case where some devices fail or are partitioned.
The new code maintains a list of leaf vdevs in the pool. MMP records
the last leaf used for an MMP write in mmp->mmp_last_leaf. To choose
the next leaf, MMP starts at mmp->mmp_last_leaf and traverses the list,
continuing from the head if the tail is reached. It stops when a
suitable leaf is found or all leaves have been examined.
Added a test to verify MMP write distribution is even.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7953
The linux kernel's nfsd implementation use RWF_SYNC to determine if the
write is synchronous or not. This flag is used to set the kernel's I/O
control block flags. Unfortunately, ZFS was not updated to inspect these
flags so NFS sync writes were not being honored.
This change maps the IOCB_* flags to the ZFS equivalent.
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#8474Closes#8452Closes#8486
Commit torvalds/linux@736706bee has removed the get_fs() function
as a bit of cleanup. It has been defined as KERNEL_DS on all
architectures for all supported kernels. Replace get_fs() with
KERNEL_DS as was done in the kernel.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8479
The function bpobj_iterate_impl overflows the stack when bpobjs
are deeply nested. Rewrite the function to eliminate the recursion.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#7674Closes#7675Closes#7908
Before allowing new allocations to the metaslab we need to ensure
that any issued initializing writes have been synced. Otherwise,
it's possible for metaslab_block_alloc() to allocate a range which
is about to be overwritten by an initializing IO.
Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8461
Fix indentation of code in ifdef's.
Remove obsolete comment.
Make if/else statements more readable by adding braces.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8459
When multihost is enabled, and a pool is suspended, return
EINVAL in response to "zpool clear <pool>". The pool
may have been imported on another host while I/O was suspended.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6933Closes#8460
abd_alloc() normally does scatter allocations, thus solving the problem
that ABD originally set out to: the bulk of ZFS's allocations are single
pages, which are faster to allocate and free, and don't suffer from
internal fragmentation (and the inability to reclaim memory because some
buffers in the slab are still allocated).
However, the current code does linear allocations for 4KB and smaller
allocations, defeating the purpose of ABD.
Scatter ABD's use at least one page each, so sub-page allocations waste
some space when allocated as scatter (e.g. 2KB scatter allocation wastes
half of each page). Using linear ABD's for small allocations means that
they will be put on slabs which contain many allocations. This can
improve memory efficiency, but it also makes it much harder for ARC
evictions to actually free pages, because all the buffers on one slab
need to be freed in order for the slab (and underlying pages) to be
freed. Typically, 512B and 1KB kmem caches have 16 buffers per slab, so
it's possible for them to actually waste more memory than scatter (one
page per buf = wasting 3/4 or 7/8th; one buf per slab = wasting
15/16th).
Spill blocks are typically 512B and are heavily used on systems running
selinux with the default dnode size and the `xattr=sa` property set.
By default we will use linear allocations for 512B and 1KB, and scatter
allocations for larger (1.5KB and up).
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8455
The spa_txg_history_init_io() and spa_txg_history_fini_io() were
mistakenly taking SCL_ALL when only SCL_CONFIG is required to
access the vdev stats. This could result in a deadlock which
was observed when running ztest.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8445
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8444
The issue is caused by a small discrepancy in how userland creates the
partition layout and the kernel estimates available space:
* zpool command: subtract 9M from the usable device size, then align
to 1M boundary. 9M is the sum of 1M "start" partition alignment + 8M
EFI "reserved" partition.
* kernel module: subtract 10M from the device size. 10M is the sum of
1M "start" partition alignment + 1m "end" partition alignment + 8M
EFI "reserved" partition.
For devices where the number of sectors is not a multiple of the
alignment size the zpool command will create a partition layout which
reserves less than 1M after the 8M EFI "reserved" partition:
Disk /dev/sda: 1024 MiB, 1073739776 bytes, 2097148 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 49811D40-16F4-4E41-84A9-387703950D7F
Device Start End Sectors Size Type
/dev/sda1 2048 2078719 2076672 1014M Solaris /usr & Apple ZFS
/dev/sda9 2078720 2095103 16384 8M Solaris reserved 1
When the kernel module vdev_open() the device its max_asize ends up
being slightly smaller than asize: this results in a huge number (16E)
reported by metaslab_class_expandable_space().
This change prevents bdev_max_capacity() from returing a size smaller
than bdev_capacity().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#1468Closes#8391
Soft lockups could happen when multiple threads trying
to get zrl on the same dnode handle in order to allocate
and initialize the dnode marked as DN_SLOT_ALLOCATED.
Don't loop from beginning when we can't get zrl, otherwise
we would increase the zrl refcount and nobody can actually
lock it.
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Closes#8433
The SCST driver (SCSI target driver implementation) and possibly
others may issue read bio's with a length of zero bytes. Although
this is unusual, such bio's issued under certain condition can cause
kernel oops, due to how rangelock is implemented.
rangelock_add_reader() is not made to handle overlap of two (or more)
ranges from read bio's with the same offset when one of them has size
of 0, even though they conceptually overlap. Allowing them to enter
rangelock results in kernel oops by dereferencing invalid pointer,
or assertion failure on AVL tree manipulation with debug enabled
kernel module.
For example, this happens when read bio whose (offset, size) is
(0, 0) enters rangelock followed by another read bio with (0, 4096)
when (0, 0) rangelock is still locked, when there are no pending
write bio's. It can also happen with reverse order, which is (0, N)
followed by (0, 0) when (0, N) is still locked. More details
mentioned in #8379.
Kernel Oops on ->make_request_fn() of ZFS volume
https://github.com/zfsonlinux/zfs/issues/8379
Prevent this by returning bio with size 0 as success without entering
rangelock. This has been done for write bio after checking flusher
bio case (though not for the same reason), but not for read bio.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8379Closes#8401
This patch introduces 3 new histograms per metaslab. These
histograms track segments that have made it to the metaslab's
space map histogram (and are part of the spacemap) but have
not yet reached the ms_allocatable tree on loaded metaslab's
because these metaslab's are currently syncing and haven't
gone through metaslab_sync_done() yet.
The histograms help when we decide whether to load an unloaded
metaslab in-order to allocate from it. When calculating the
weight of an unloaded metaslab traditionally, we look at the
highest bucket of its spacemap's histogram. The problem is
that we are not guaranteed to be able to allocated that
segment when we load the metaslab because it may still be at
the freeing, freed, or defer trees. The new histograms are
used when we try to calculate an unloaded metaslab's weight
to deal with this issue by removing segments that have would
not be in the allocatable tree at runtime. Note, that this
method of dealing with this is not completely accurate as
adjacent segments are not always consolidated in the space
map histogram of a metaslab.
In addition and to make things deterministic, we always reset
the weight of unloaded metaslabs based on their space map
weight (instead of doing that on a need basis). Thus, every
time a metaslab is loaded and its weight is reset again (from
the weight based on its space map to the one based on its
allocatable range tree) we expect (and assert) that this
change in weight can only get better if it doesn't stay the
same.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8358
Trying to mount a dataset from a readonly pool could inadvertently start
the user accounting upgrade task, leading to the following failure:
VERIFY3(tx->tx_threads == 2) failed (0 == 2)
PANIC at txg.c:680:txg_wait_synced()
Showing stack for process 2541
CPU: 2 PID: 2541 Comm: z_upgrade Tainted: P O 3.16.0-4-amd64 #1 Debian 3.16.51-3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
[<0>] ? dump_stack+0x5d/0x78
[<0>] ? spl_panic+0xc9/0x110 [spl]
[<0>] ? dnode_next_offset+0x1d4/0x2c0 [zfs]
[<0>] ? dmu_object_next+0x77/0x130 [zfs]
[<0>] ? dnode_rele_and_unlock+0x4d/0x120 [zfs]
[<0>] ? txg_wait_synced+0x91/0x220 [zfs]
[<0>] ? dmu_objset_id_quota_upgrade_cb+0x10f/0x140 [zfs]
[<0>] ? dmu_objset_upgrade_task_cb+0xe3/0x170 [zfs]
[<0>] ? taskq_thread+0x2cc/0x5d0 [spl]
[<0>] ? wake_up_state+0x10/0x10
[<0>] ? taskq_thread_should_stop.part.3+0x70/0x70 [spl]
[<0>] ? kthread+0xbd/0xe0
[<0>] ? kthread_create_on_node+0x180/0x180
[<0>] ? ret_from_fork+0x58/0x90
[<0>] ? kthread_create_on_node+0x180/0x180
This patch updates both functions responsible for checking if we can
perform user accounting to verify the pool is not readonly.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8424
If we hit the (NSEC_TO_TICK(diff) == 0) condition in
zio_delay_interrupt, zio_interrupt is never called and the
zio does not progress.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
Closes#8404
Add the zio_deadman_log_all tunable to print all zios in
zio_deadman_impl(). Also, in all cases, display the depth of the
zio relative to the original parent zio. This is meant to be used by
developers to gain diagnostic information for hangs which don't involve
fully set-up zio trees or are otherwise stuck or hung in an early stage.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#8362
Add -h switch to zfs send command to send dataset holds. If
holds are present in the stream, zfs receive will create them
on the target dataset, unless the zfs receive -h option is used
to skip receive of holds.
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#7513
5d43cc9a59 renamed it to rangelock_enter().
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8408
Deletion throttle currently does not account for holes in a file.
This means that it can activate when it shouldn't.
To fix it we switch the throttle to be based on the number of
L1 blocks we will have to dirty when freeing
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#7725Closes#7888
This patch is an async implementation of the existing sync
zfs_unlinked_drain() function. This function is called at mount time and
is responsible for freeing znodes that we didn't get to freeing before.
We don't have to hold mounting of the dataset until the unlinked list is
fully drained as is done now. Since we can process the unlinked set
asynchronously this results in a better user experience when mounting a
dataset with entries in the unlinked set.
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8142
Initially, metaslabs and space maps used to be the same thing
in ZFS. Later, we started differentiating them by referring
to the space map as the on-disk state of the metaslab, making
the metaslab a higher-level concept that is metadata that deals
with space accounting. Today we've managed to split that code
furthermore, with the space map being its own on-disk data
structure used in areas of ZFS besides metaslabs (e.g. the
vdev-wide space maps used for zpool checkpoint or vdev removal
features).
This patch refactors the space map code to further split the
space map code from the metaslab code. It does so by getting
rid of the idea that the space map can have a different in-core
and on-disk length (sm_length vs smp_length) which is something
that is only used for the metaslab code, and other consumers
of space maps just have to deal with. Instead, this patch
introduces changes that move the old in-core length of the
metaslab's space map to the metaslab structure itself (see
ms_synced_length field) while making the space map code only
care about the actual space map's length on-disk.
The result of this is that space map consumers no longer have
to deal with syncing two different lengths for the same
structure (e.g. space_map_update() goes away) while metaslab
specific behavior stays within the metaslab code. Specifically,
the ms_synced_length field keeps track of the amount of data
metaslab_load() can read from the metaslab's space map while
working concurrently with metaslab_sync() that may be
appending to that same space map.
As a side note, the patch also adds a few comments around
the metaslab code documenting some assumptions and expected
behavior.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8328
zfs create, receive and rename can bypass this hierarchy rule. Update
both userland and kernel module to prevent this issue and use pyzfs
unit tests to exercise the ioctls directly.
Note: this commit slightly changes zfs_ioc_create() ABI. This allow to
differentiate a generic error (EINVAL) from the specific case where we
tried to create a dataset below a ZVOL (ZFS_ERR_WRONG_PARENT).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Due to an off-by-one condition in spa_preferred_class() we are picking
the "normal" allocation class instead of the "special" one for file
blocks with size equal to the special_small_blocks property value.
This change fix the small code issue, update the ZFS Test Suite and the
zfs(8) man page.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8351Closes#8361
Re-factor arc_read() to better account for embedded data blkptrs.
Previously, reading the payload from an embedded blkptr would cause
arcstats such as demand_metadata_misses to be bumped when there was
actually no cache "miss" because the data are already available in
the blkptr.
The following test procedure was used to demonstrate the problem:
zpool create tank ...
zfs create -o compression=lz4 tank/fs
echo blah > /tank/fs/blah
stat /tank/fs/blah
grep 'meta.*mis' /proc/spl/kstat/zfs/arcstats
and repeating the last two steps to watch the metadata miss counter
increment. This can also be demonstrated via the zfs_arc_miss DTRACE4
probe in arc_read().
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#8319
Get rid of the majority metaslab metadata when removing log vdevs
in spa_vdev_remove_log() with a call to metaslab_fini() instead
of duplicating a lot of that in vdev_remove_empty_log().
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8347
The current L2 ARC device code consistently uses psize to
increment vs_alloc but varies between psize and lsize when
decrementing it. The result of this behavior is that
vs_alloc can be decremented more that it is incremented
and underflow. This patch changes the code so asize is
used anywhere.
In addition, it ensures that vs_alloc gets incremented by
the L2 ARC device code as buffers are written and not at
the end of the l2arc_write_buffers() routine. The latter
(and old) way would temporarily underflow vs_alloc as
buffers that were just written, would be destroyed while
l2arc_write_buffers() was still looping.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8298
Address a deadlock caused by simultaneous wakeup and cancel on a zthr
by remove the hold of zthr_request_lock from zthr_wakeup. This
allows thr_wakeup to not block a thread that is in the process of
being cancelled.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Closes#8333
The Linux 5.0 kernel updated the bio_set_dev() macro so it calls the
GPL-only bio_associate_blkg() symbol thus inadvertently converting
the entire macro. Provide a minimal version which always assigns the
request queue's root_blkg to the bio.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8287
SUBDIRs has been deprecated for a long time, and was finally removed in
the 5.0 kernel. Use "M=" instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8257
In the 5.0 kernel, only the mount namespace code should use the MS_*
macos. Filesystems should use the SB_* ones.
https://patchwork.kernel.org/patch/10552493/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8264
totalram_pages() was converted to an atomic variable in 5.0:
https://patchwork.kernel.org/patch/10652795/
Its value should now be read though the totalram_pages() helper
function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8263
access_ok no longer needs a 'type' parameter in the 5.0 kernel.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8261
= Old behavior
For vdev sizes 100GB to 50TB we keep ~200 metaslabs per
vdev and the metaslab size grows from 512MB to 256GB.
For vdev's bigger than that we start increasing the
number of metaslabs until we hit the 128K limit.
= New Behavior
For vdev sizes 100GB to 3TB we keep ~200 metaslabs per
vdev and the metaslab size grows from 512MB to 16GB.
For vdev's bigger than that we start increasing the
number of metaslabs until we hit the 128K limit.
= Reasoning
The old behavior makes metaslabs grow in size when
the vdev range is between 3TB (ms_size 16GB) and
32PB (ms_size 256GB). Even though keeping the number
of metaslabs is good in terms of potential number of
I/Os per TXG, these bigger metaslabs take longer
to be loaded and after they are loaded they can
take up a lot of memory because of their range trees.
This change tries to put a boundary in memory and
loading time for the specific range of vdev sizes.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8324
The range_tree_verify function looks for a segment in a
range tree and panics if the segment is present on the
tree. This patch gives the function a more descriptive
name.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8327
This allows the spa config refcounts to use tracking in debug builds
without triggering the "No such hold %p on refcount" panic.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#8326
Currently, zvol_rename_minors_impl() calls kmem_asprintf()
to allocate and initialize a string. This function is a thin
wrapper around the kernel's kvasprintf() and does not call
into the SPL's kmem tracking code when it is enabled. However,
this function frees the string with the tracked kmem_free()
instead of the untracked strfree(), which causes the SPL
kmem tracking code to believe that the function is attempting
to free memory it never allocated, triggering an ASSERT. This
patch simply corrects this issue.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8307
Since d8fdfc2 was integrated dsl_pool_create() does not call
dmu_objset_create_impl() for the root dataset when running in
userland (ztest): this creates a pool with a partially initialized
root dataset. Trying to import and use this pool results in both
zpool and zfs executables dumping core.
Fix this by adopting an alternative change suggested in OpenZFS 8607
code review.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Original-patch-by: Robert Mustacchi <rm@joyent.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8277
This check provides no real additional protection and unnecessarily
introduces a dependency on the "oops_in_progress" kernel symbol.
Remove the check, it there are special circumstances on other
platforms which make this a requirement it can be reintroduced
for all relevant call paths in a more portable comprehensive manor.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8297
Most callers that need to operate on a loaded metaslab, always
call metaslab_load_wait() before loading the metaslab just in
case someone else is already doing the work.
Factoring metaslab_load_wait() within metaslab_load() makes the
later more robust, as callers won't have to do the load-wait
check explicitly every time they need to load a metaslab.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8290
Currently, when a DRR_OBJECT record is read into memory in
receive_read_record(), memory is allocated for the bonus buffer.
However, if the object doesn't have a bonus buffer the code will
still "allocate" the zero bytes, but the memory will not be passed
to the processing thread for cleanup later. This causes the spl
kmem tracking code to report a leak. This patch simply changes the
code so that it only allocates this memory if it has a non-zero
length.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8266
The point of this refactoring is to break the high-level conceptual
steps of spa_sync() to their own helper functions. In general large
functions can enhance readability if structured well, but in this
case the amount of conceptual steps taken could use the help of
helper functions.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8293
Currently, the functions dbuf_prefetch_indirect_done() and
dmu_assign_arcbuf_by_dnode() assume that dbuf_hold_level() cannot
fail. In the event of an error the former will cause a NULL pointer
dereference and the later will trigger a VERIFY. This patch adds
error handling to these functions and their callers where necessary.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8291
The following fields from the vdev_t struct are not used anywhere.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8285
The ztest_ddt_repair() test is designed inflict damage to the
ddt which can be repairable by a scrub. Unfortunately, this
repair logic was broken at some point and it went undetected.
This issue is not specific to ztest, but thankfully this extra
redundancy is rarely enabled and even more rarely needed.
The root cause was identified to be the ddt_bp_create()
function called by dsl_scan_ddt_entry() which did not set the
dedup bit of the generated block pointer.
The consequence of this was that the ZIO_DDT_READ_PIPELINE was
never enabled for the block pointer during the scrub, and the
dedup ditto repair logic was never run. Note that for demand
reads which don't rely on ddt_bp_create() the required pipeline
stages would be enabled and the repair performed.
This was resolved by unconditionally setting the dedup bit in
ddt_bp_create(). This way all codes paths which may need to
perform a repair from a block pointer generated from the dtt
entry will be able too. The only exception is that the dedup
bit is cleared in ddt_phys_free() which is required to avoid
leaking space.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8270
Since the new spacemap encoding was ported to ZoL that's no longer
a limitation. This patch updates vdev_is_spacemap_addressable()
that was performing that check.
It also updates the appropriate test to ensure that the same
functionality is tested. The test does so by creating pools that
don't have the new spacemap encoding enabled - just the checkpoint
feature. This patch also reorganizes that same tests in order to
cut in half its memory consumption.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8286
Increase the default allowed number of reconstruction attempts.
There's not an exact right number for this setting. It needs
to be set large enough to cover any realistic failure scenarios
and small enough to avoid stalling the IO pipeline and invoking
the dead man detection.
The current value of 256 was empirically determined to be too
low based on multi-day runs of ztest. The fault injection code
would inject more damage than could be reconstructed given the
relatively small number of attempts. However, in all observed
cases the block could be reconstructed using a slightly higher
limit.
Based on local testing increasing the default value to 4096 was
determined to strike the best balance. Checking all combinations
takes less than 10s in the worst case, and has so far eliminated
the vast majority of false positives detected by ztest. This
delay is roughly on par with how long retries may be performed
to a misbehaving HDD and was deemed to be reasonable. Better to
err on the side of a brief delay rather than fail to reconstruct
the data.
Lastly, the -Y flag has been added to zdb to make it easy to try all
possible combinations when performing split block reconstruction.
For badly damaged blocks with 18 splits, they can be fully enumerated
within a few minutes. This has been done to ensure permanent errors
are never incorrectly reported when ztest verifies the pool with zdb.
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8271
Currently, dbuf_read() may decide to create a zio_root which is
used as a parent for any child zios created in dbuf_read_impl().
However, if there is an error in dbuf_read_impl(), this zio is
never executed and ends up leaked. This patch simply ensures
that we always execute the root zio, even i it has no real work
to do.
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8267
Some minor spelling mistakes and typos. No functional changes.
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8272
Adds a new lock for serializing operations on zthrs.
The commit also includes some code cleanup and
refactoring.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#8229
On full pool when pool root filesystem references very few bytes,
the f_blocks returned to statvfs is 0 but should be at least 1.
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#8253Closes#8254
Object allocation performance can be improved for complex operations
by providing an interface which returns the newly allocated dnode.
This allows the caller to immediately use the dnode without incurring
the expense of looking up the dnode by object number.
The functions dmu_object_alloc_hold(), zap_create_hold(), and
dmu_bonus_hold_by_dnode() were added for this purpose.
The zap_create_* functions have been updated to take advantage of
this new functionality. The dmu_bonus_hold_impl() function should
really have never been included in sys/dmu.h and was removed.
It's sole caller was converted to use dmu_bonus_hold_by_dnode().
The new symbols have been exported for use by Lustre.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8015
This patch simply fixes a small bug where dnode_hold_impl() could
attempt to allocate a dnode that was in the process of being freed,
but which still had active references. This patch simply adds the
required check.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8249
This commit fixes a small issue which causes both zfs receive and
rollback operations to incorrectly increase the "filesystem_count"
property value.
This change also adds a new test group "limits" to the ZFS Test Suite
to exercise both filesystem_count/limit and snapshot_count/limit
functionality.
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8232
Scrubbing is supposed to detect and repair all errors in the pool.
However, it wrongly ignores active spare devices. The problem can
easily be reproduced in OpenZFS at git rev 0ef125d with these
commands:
truncate -s 64m /tmp/a /tmp/b /tmp/c
sudo zpool create testpool mirror /tmp/a /tmp/b spare /tmp/c
sudo zpool replace testpool /tmp/a /tmp/c
/bin/dd if=/dev/zero bs=1024k count=63 oseek=1 conv=notrunc of=/tmp/c
sync
sudo zpool scrub testpool
zpool status testpool # Will show 0 errors, which is wrong
sudo zpool offline testpool /tmp/a
sudo zpool scrub testpool
zpool status testpool # Will show errors on /tmp/c,
# which should've already been fixed
FreeBSD head is partially affected: the first scrub will detect
some errors, but the second scrub will detect more. This same
test was run on Linux before applying the fix and the FreeBSD
head behavior was observed.
Authored by: asomers <asomers@FreeBSD.org>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored by: Spectra Logic Corp
OpenZFS-issue: https://www.illumos.org/issues/8473
FreeBSD-commit: https://github.com/freebsd/freebsd/commit/e20ec8879
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/554675eeCloses#8251
PROBLEM
========
When invoking "zpool initialize" on a pool the command will
create a thread to initialize each disk. Unfortunately, it does
this serially across many transaction groups which can result
in commands taking a long time to return to the user and may
appear hung. The same thing is true when trying to suspend/cancel
the operation.
SOLUTION
=========
This change refactors the way we invoke the initialize interface
to ensure we can start or stop the intialization in just a few
transaction groups.
When stopping or cancelling a vdev initialization perform it
in two phases. First signal each vdev initialization thread
that it should exit, then after all threads have been signaled
wait for them to exit.
On a pool with 40 leaf vdevs this reduces the vdev initialize
stop/cancel time from ~10 minutes to under a second. The reason
for this is spa_vdev_initialize() no longer needs to wait on
multiple full TXGs per leaf vdev being stopped.
This commit additionally adds some missing checks for the passed
"initialize_vdevs" input nvlist. The contents of the user provided
input "initialize_vdevs" nvlist must be validated to ensure all
values are uint64s. This is done in zfs_ioc_pool_initialize() in
order to keep all of these checks in a single location.
Updated the innvl and outnvl comments to match the formatting used
for all other new sytle ioctls.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#8230
PROBLEM
========
The first access to a block incurs a performance penalty on some platforms
(e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are
"thick provisioned", where supported by the platform (VMware). This can
create a large delay in getting a new virtual machines up and running (or
adding storage to an existing Engine). If the thick provision step is
omitted, write performance will be suboptimal until all blocks on the LUN
have been written.
SOLUTION
=========
This feature introduces a way to 'initialize' the disks at install or in the
background to make sure we don't incur this first read penalty.
When an entire LUN is added to ZFS, we make all space available immediately,
and allow ZFS to find unallocated space and zero it out. This works with
concurrent writes to arbitrary offsets, ensuring that we don't zero out
something that has been (or is in the middle of being) written. This scheme
can also be applied to existing pools (affecting only free regions on the
vdev). Detailed design:
- new subcommand:zpool initialize [-cs] <pool> [<vdev> ...]
- start, suspend, or cancel initialization
- Creates new open-context thread for each vdev
- Thread iterates through all metaslabs in this vdev
- Each metaslab:
- select a metaslab
- load the metaslab
- mark the metaslab as being zeroed
- walk all free ranges within that metaslab and translate
them to ranges on the leaf vdev
- issue a "zeroing" I/O on the leaf vdev that corresponds to
a free range on the metaslab we're working on
- continue until all free ranges for this metaslab have been
"zeroed"
- reset/unmark the metaslab being zeroed
- if more metaslabs exist, then repeat above tasks.
- if no more metaslabs, then we're done.
- progress for the initialization is stored on-disk in the vdev’s
leaf zap object. The following information is stored:
- the last offset that has been initialized
- the state of the initialization process (i.e. active,
suspended, or canceled)
- the start time for the initialization
- progress is reported via the zpool status command and shows
information for each of the vdevs that are initializing
Porting notes:
- Added zfs_initialize_value module parameter to set the pattern
written by "zpool initialize".
- Added zfs_vdev_{initializing,removal}_{min,max}_active module options.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/9102
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210ebCloses#8230
This change is required to ease the transition when upgrading
from 0.7.x to 0.8.x. It allows 0.8.x user space utilities to
remain compatible with 0.7.x and older kernel modules.
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8231
The dmu_objset_remap_indirects_impl() logic depends on dnode_hold()
returning ENOENT for dnodes which will be freed and should be skipped.
This behavior can only be relied upon when taking a new hold and
while the caller has an open transaction. This ensures that the
open txg cannot advance and that a concurrent free will end up
in the same txg (which is critical). Relying on an existing hold
will not prevent dnode_free() from succeeding.
The solution is to take an additional dnode_hold() after assigning
the transaction. This ensures the remap will never dirty the dnode
if it was freed while we were waiting in dmu_tx_assign(, TXG_WAIT).
Randomly set zfs_object_remap_one_indirect_delay_ms in ztest. This
increases the likelihood of an operation racing with the remap.
Converted from ticks to milliseconds.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8215
Following the fix for 9018 (Replace kmem_cache_reap_now() with
kmem_cache_reap_soon), the arc_reclaim_thread() no longer blocks
while reaping. However, the code is still confusing and error-prone,
because this thread has two responsibilities. We should instead
separate this into two threads each with their own responsibility:
1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which
improves `arc_is_overflowing()`
2. keep enough free memory in the system, by calling
`arc_kmem_reap_now()` plus `arc_shrink()`, which improves
`arc_available_memory()`.
Furthermore, we can use the zthr infrastructure to separate the
"should we do something" from "do it" parts of the logic, and
normalize the start up / shut down of the threads.
Authored by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Tim Kordas <tim.kordas@joyent.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Brad Lewis <brad.lewis@delphix.com>
Signed-off-by: Brad Lewis <brad.lewis@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/9284
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/de753e34f9Closes#8165
In dfbe2675 zfs_dirty_data_sync was changed to a new tunable named
zfs_dirty_data_sync_percent. Unfortunately, the module parameter
documentation is the code was not updated accordingly. This patch
simply corrects that.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8212
This patch simply removes an invalid assert from the zap_update()
function. The ASSERT is invalid because it does not hold the zap
lock from the time it fetches the old value to the time it confirms
that it is what it should be.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8209
Porting Notes:
* Additional changes to recv_rename_impl() were required due to
encryption code not being merged in OpenZFS yet.
* libzfs_core python bindings (pyzfs) were updated to fully support
both lzc_rename() and lzc_destroy()
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
OpenZFS-issue: https://www.illumos.org/issues/9630
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/049ba63Closes#8207
This patch addresses an issue found in ztest where resilver
write zios that were passed to an indirect vdev would end up
being handled as though they were resilver read zios. This
caused issues where the zio->io_abd would be both read to
and written from at the same time, causing asserts to fail.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8193
Linux kstat IO and TIMER printed values as signed. However the counters
only increment. Thus humans looking at the data can be confused when
the counters roll over.
Note: The recommended use of these values is to monitor the derivative,
which don't really care about the sign. See explanations related to
non-negative derivatives in the various time-series databases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes#8131Closes#8198
Macro ZFS_MINOR, introduced in commit a6cc9756 to record the chosen
static minor number for /dev/zfs, conflicts with an existing macro
in Lustre. The lustre macro (along with _MAJOR, _PATCH, _FIX) is
used to record the zfsonlinux version Lustre is being built against.
Since the Lustre macro came first, and is used in past versions of
lustre at least going back to 2.10, it makes sense to rename the
macro in ZFS instead of doing so in Lustre which would require
backporting the patch.
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#8195
As a result of the changes made in 8585, it's possible for an excessive
amount of vdev flush commands to be issued under some workloads.
Specifically, when the workload consists of mostly async write activity,
interspersed with some sync write and/or fsync activity, we can end up
issuing more flush commands to the underlying storage than is actually
necessary. As a result of these flush commands, the write latency and
overall throughput of the pool can be poorly impacted (latency
increases, throughput decreases).
Currently, any time an lwb completes, the vdev(s) written to as a result
of that lwb will be issued a flush command. The intenion is so the data
written to that vdev is on stable storage, prior to communicating to any
waiting threads that their data is safe on disk.
The problem with this scheme, is that sometimes an lwb will not have any
threads waiting for it to complete. This can occur when there's async
activity that gets "converted" to sync requests, as a result of calling
the zil_async_to_sync() function via zil_commit_impl(). When this
occurs, the current code may issue many lwbs that don't have waiters
associated with them, resulting in many flush commands, potentially to
the same vdev(s).
For example, given a pool with a single vdev, and a single fsync() call
that results in 10 lwbs being written out (e.g. due to other async
writes), that will result in 10 flush commands to that single vdev (a
flush issued after each lwb write completes). Ideally, we'd only issue a
single flush command to that vdev, after all 10 lwb writes completed.
Further, and most important as it pertains to this change, since the
flush commands are often very impactful to the performance of the pool's
underlying storage, unnecessarily issuing these flush commands can
poorly impact the performance of the lwb writes themselves. Thus, we
need to avoid issuing flush commands when possible, in order to acheive
the best possible performance out of the pool's underlying storage.
This change attempts to address this problem by changing the ZIL's logic
to only issue a vdev flush command when it detects an lwb that has a
thread waiting for it to complete. When an lwb does not have threads
waiting for it, the responsibility of issuing the flush command to the
vdevs involved with that lwb's write is passed on to the "next" lwb.
It's only once a write for an lwb with waiters completes, do we issue
the vdev flush command(s). As a result, now when we issue the flush(s),
we will issue them to the vdevs involved with that specific lwb's write,
but potentially also to vdevs involved with "previous" lwb writes (i.e.
if the previous lwbs did not have waiters associated with them).
Thus, in our prior example with 10 lwbs, it's only once the last lwb
completes (which will be the lwb containing the waiter for the thread
that called fsync) will we issue the vdev flush command; all of the
other lwbs will find they have no waiters, so they'll pass the
responsibility of the flush to the "next" lwb (until reaching the last
lwb that has the waiter).
Porting Notes:
* Reconciled conflicts with the fastwrite feature.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Ported-by: Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9962
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/545190c6Closes#8188
Porting Notes:
* Add options to zfs-module-parameters(5) man page.
* zfs_nocacheflush move to vdev.c instead of vdev_disk.c, since
the latter doesn't get built for user space.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9963
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f8fdf68125Closes#8186
This patch simply ensures that scn->scn_prefetch_queue is emptied
before the kernel module is unloaded and when scanning completes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8178
Commit 4c5b89f59 refactored dnode_hold() and in the process
accidentally introduced a slight change in behavior which was
not intended. The required behavior is that once the ZPL,
or other consumer, declares its intent to free a dnode then
dnode_hold() should immediately start failing. This updated
code wouldn't return the failure until after it was freed.
When DNODE_MUST_BE_ALLOCATED is set it must return ENOENT, and
when DNODE_MUST_BE_FREE is set it must return EEXIST;
This issue was uncovered by ztest_remap() which attempted
to remap a freeing object which should have been skipped as
described by the comment in dmu_objset_remap_indirects_impl().
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8172
The verbose output of 'zpool list' was not correctly aligned due
to differences in the vdev name lengths. Minimally update the
code the correct the alignment using the same strategy employed
by 'zpool status'.
Missing dashes were added for the empty defaults columns, and
the vdev state is now printed for all vdevs.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7308Closes#8147
This patch corrects an issue where spa_vdev_remove() would
call spa_history_log_internal() while holding the spa config
lock. This function may decide to block until the next txg if
the current one seems too full. However, since the thread is
holding the config log, the txg sync thread cannot progress
and the system ends up deadlocked. This patch simply moves
all calls to spa_history_log_internal() outside of the config
lock.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8162
* Detect IO errors during device removal
While device removal cannot verify the checksums of individual
blocks during device removal, it can reasonably detect hard IO
errors from the leaf vdevs. Failure to perform this error
checking can result in device removal completing successfully,
but moving no data which will permanently corrupt the pool.
Situation 1: faulted/degraded vdevs
In the configuration shown below, the removal of mirror-0 will
permanently corrupt the pool. Device removal will preferentially
copy data from 'vdev1 -> vdev3' and from 'vdev2 -> vdev4'. Which
in this case will result in nothing being copied since one vdev
in each of those groups in unavailable. However, device removal
will complete successfully since all IO errors are ignored.
tank DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
/var/tmp/vdev1 FAULTED 0 0 0 external fault
/var/tmp/vdev2 ONLINE 0 0 0
mirror-1 DEGRADED 0 0 0
/var/tmp/vdev3 ONLINE 0 0 0
/var/tmp/vdev4 FAULTED 0 0 0 external fault
This issue is resolved by updating the source child selection
logic to exclude unreadable leaf vdevs. Additionally, unwritable
destination child vdevs which can never succeed are skipped to
prevent generating a large number of write IO errors.
Situation 2: individual hard IO errors
During removal if an unexpected hard IO error is encountered when
either reading or writing the child vdev the entire removal
operation is cancelled. While it may be possible to reconstruct
the data after removal that cannot be guaranteed. The only
strictly safe thing to do is to cancel the removal.
As a future improvement we may want to instead suspend the removal
process and allow the damaged region to be retried. But that work
is left for another time, hard IO errors during the removal process
are expected to be exceptionally rare.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #6900Closes#8161
ztest currently uses the boolean flag ztest_device_removal_active
to protect some tests that may not run successfully if they occur
at the same time as ztest_device_removal(). Unfortunately, in the
event that ztest is in the middle of a device removal when it
decides to issue a SIGKILL, the device removal will be
automatically restarted (without setting the flag) when the pool
is re-imported on the next run. This patch corrects this by
ensuring that any in-progress removals are completed before running
further tests after the re-import.
This patch also makes a few small changes to prevent race conditions
involving the creation and destruction of spa->spa_vdev_removal,
since this field is not protected by any locks. Some checks that
may run concurrently with setting / unsetting this field have been
updated to check spa->spa_removing_phys.sr_state instead. The most
significant change here is that spa_removal_get_stats() no longer
accounts for in-flight work done, since that could result in a NULL
pointer dereference.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8105
This commit reverts to using printk() instead of zfs_dbgmsg() to log
messages in vdev_disk_error(): this is necessary because the latter can
be called from interrupt context where we are not allowed to sleep.
Unfortunately zfs_dbgmsg() performs its allocations calling kmalloc()
with the KM_SLEEP flag which may result in the following oops:
BUG: scheduling while atomic: swapper/4/0/0x10000100
Call Trace:
<IRQ> [<0>] dump_stack+0x19/0x1b
...
[<0>] spl_kmem_alloc+0xdf/0x140 [spl] <-- kmem_alloc(size, KM_SLEEP)
[<0>] __dprintf+0x69/0x150 [zfs]
[<0>] ? kmem_cache_free+0x1e2/0x200
[<0>] vdev_disk_error.part.15+0x5f/0x70 [zfs]
[<0>] vdev_disk_io_flush_completion+0x48/0x70 [zfs]
[<0>] bio_endio+0x67/0xb0
[<0>] blk_update_request+0x90/0x360
...
[<0>] scsi_finish_command+0xdc/0x140
[<0>] scsi_softirq_done+0x132/0x160
[<0>] blk_done_softirq+0x96/0xc0
[<0>] __do_softirq+0xf5/0x280
[<0>] call_softirq+0x1c/0x30
[<0>] do_softirq+0x65/0xa0
[<0>] irq_exit+0x105/0x110
[<0>] do_IRQ+0x56/0xf0
[<0>] common_interrupt+0x162/0x162
<EOI> [<0>] ? cpuidle_enter_state+0x54/0xd0
[<0>] cpuidle_idle_call+0xde/0x230
[<0>] arch_cpu_idle+0xe/0xb0
[<0>] cpu_startup_entry+0x14a/0x1e0
[<0>] start_secondary+0x1f7/0x270
[<0>] start_cpu+0x5/0x14
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8137Closes#8150
Currently, several tests in the ZFS Test Suite that attempt to
test scrub and resilver behavior occasionally fail. A big reason
for this is that these tests use a combination of zinject and
zfs_scan_vdev_limit to attempt to slow these operations enough
to verify their test commands. This method works most of the time,
but provides no guarantees and leads to flaky behavior. This patch
adds a new tunable, zfs_scan_suspend_progress, that ensures that
scans make no progress, guaranteeing that tests can be run without
racing.
This patch also changes zfs_remove_max_bytes_pause to match this
new tunable. This provides some consistency between these two
similar tunables and ensures that the tunable will not misbehave
on 32-bit systems.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8111
CID 184285: Read from pointer after free (USE_AFTER_FREE)
This patch fixes an use-after-free in vdev_config_generate_stats()
moving the kmem_free() call at the end of the function.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8120
This commit adds a new test case to the ZFS Test Suite to verify ZED
can detect when a device is physically removed from a running system:
the device will be offlined if a spare is not available in the pool.
We implement this by using the existing libudev functionality and
without relying solely on the FM kernel module capabilities which have
been observed to be unreliable with some kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#1537Closes#7926
This patch adds a new slow I/Os (-s) column to zpool status to show the
number of VDEV slow I/Os. This is the number of I/Os that didn't
complete in zio_slow_io_ms milliseconds. It also adds a new parsable
(-p) flag to display exact values.
NAME STATE READ WRITE CKSUM SLOW
testpool ONLINE 0 0 0 -
mirror-0 ONLINE 0 0 0 -
loop0 ONLINE 0 0 0 20
loop1 ONLINE 0 0 0 0
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7756Closes#6885
It's disabled by default, update code and tests to reflect
the documentation.
Minor cleanup in delegate_common.kshlib.
Reviewed-by: Gregor Kopka <gregor@kopka.net>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#7835Closes#8045
This patch simply ensures that vdev_indirect_splits_damage()
cannot hit a divide by zero exception if a split has no
children with valid data. The normal reconstruction code
path in vdev_indirect_reconstruct_io_done() already has this
check.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8086
This patch simply corrects an issue where vdev_dtl_reassess()
could attempt to dirty the vdev config even when the spa was
not elligable for writing.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8085
This patch ensures that logs are replayed on all datasets prior
to starting ztest workers. This ensures that the call to
vdev_offline() a log device in ztest_fault_inject() will not fail
due to the log device being required for replay.
This patch also fixes a small issue found during testing where
spa_keystore_load_wkey() does not check that the dataset specified
is an encryption root. This check was present in libzfs, however.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8084
This patch fixes a race condition where the end of
vdev_remove_replace_with_indirect(), which holds
svr_lock, would race against spa_vdev_removal_destroy(),
which destroys the same lock and is called asynchronously
via dsl_sync_task_nowait().
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #6900Closes#8083
vdev_clear() can call vdev_set_deferred_resilver() with a
non-leaf vdev to setup a deferred resilver. However, this
function is currently written to only handle leaf vdevs.
This bug was introduced with deferred resilvers in 80a91e74.
This patch makes this function recursive so that it can find
appropriate vdevs to resilver and set vdev_resilver_deferred
on them.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #7732Closes#8082
In order to validate the gang block code ztest is configured to
artificially force a fraction of large blocks to be written as
gang blocks. The default setting chosen for this was to
write 25% of all blocks 32k or larger using gang blocks.
The confluence of an unrealistically large number of gang blocks,
the aggressive fault injection done by ztest, and the split
segment reconstruction logic introduced by device removal has
resulted in the following type of failure:
zdb -bccsv -G -d ... exit code 3
Specifically, zdb was unable to open the pool because it was
unable to reconstruct a damaged block. Manual investigation
of multiple failures clearly showed that the block could be
reconstructed. However, due to the large number of damaged
segments (>35) it could not be done in the allotted time.
Furthermore, the large number of gang blocks was determined
to be the reason for the unrealistically large number of
damaged segments. In order to make this situation less
likely, this change both increases the forced gang block
size to 64k and reduces the frequency to 3% of blocks.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8080
Adds a libzutil for utility functions that are common to libzfs and
libzpool consumers (most of what was in libzfs_import.c). This
removes the need for utilities to link against both libzpool and
libzfs.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#8050
When we delete a snapshot, we consolidate some bpobj's together because
we no longer need to keep their entries in separate buckets. This is
done in constant time by including the "sub" bpobj by reference in the
parent bpobj.
After many snapshots have been deleted, we may have many sub-bpobj's.
Usually, most sub-bpobj's don't contain many BP's. Compared to this
small payload, the sub-bpobj is relatively heavyweight since it is a
object in the MOS. A common scenario on a long-lived pool is for the
vast majority of MOS objects to be small sub-bpobj's.
To improve this situation, when consolidating bpobj's together,
bpobj_enqueue_subobj() can copy the contents of small bpobj's into the
parent, and then delete the enqueued bpobj, rather than including it by
reference. Since this copying is limited in size (to one block), the
consolidation is still constant time, though with a larger constant due
to reading in the one block of the enqueued bpobj.
This idea and mechanism are similar to how we handle "sub-subobj's".
When including a sub-bpobj by reference, if the sub-bpobj itself has
less than a block of sub-sub-bpobj's, the list of sub-sub-bpobj's is
copied to the parent bpobj's list of sub-bpobj's.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8053
Issue #7908
This patch corrects 2 small bugs where scn->scn_phys_cached was
not properly updated to match the primary copy when it needed to
be. The first resulted in the pause state not being properly
updated and the second resulted in the cached version being
completely zeroed even if the primary was not.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
This patch fixes a small issue where the zil_check_log_chain()
code path would hit an EBUSY error. This would occur when
2 threads attempted to call metaslab_activate() at the same time.
In this case, the "loser" would receive an error code which should
have been ignored, but was instead floated to the caller. This
ended up resulting in an ENXIO being returned from from
spa_ld_verify_logs().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
This patch fixes an issue where ztest's deadman thread would
trigger a panic because reconstructing artifically damaged
blocks would take too long to reconstruct. This patch simply
limits how often ztest inflicts split-block damage and how
many segments it can damage when it does.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
This patch fixes an issue discovered by ztest where
dsl_scan_ddt_entry() could add I/Os to the dsl scan queues
between when the scan had finished all required work and
when the scan was marked as complete. This caused the scan
to spin indefinitely without ending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
This patch fixes a lock inversion issue in txg_sync_thread() where
the code would attempt hold the spa config lock as a reader while
holding tx->tx_sync_lock. This races with spa_vdev_remove() which
attempts to hold the tx->tx_sync_lock to assign a new tx (via
spa_history_log_internal()) while holding the spa config lock as a
writer.
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
This patch resolves a problem where the -G option in both zdb and
ztest would cause the code to call __dprintf() to print zfs_dbgmsg
output. This function was not properly wired to add messages to the
dbgmsg log as it is in userspace and so the messages were simply
dropped. This patch also tries to add some degree of distinction to
dprintf() (which now prints directly to stdout) and zfs_dbgmsg()
(which adds messages to an internal list that can be dumped with
zfs_dbgmsg_print()).
In addition, this patch corrects an issue where ztest used a global
variable to decide whether to dump the dbgmsg buffer on a crash.
This did not work because ztest spins up more instances of itself
using execv(), which did not copy the global variable to the new
process. The option has been moved to the ztest_shared_opts_t
which already exists for interprocess communication.
This patch also changes zfs_dbgmsg_print() to use write() calls
instead of printf() so that it will not fail when used in a signal
handler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
This patch corrects an ASSERT in zil_create() that will only be
true if the call to zio_alloc_zil() does not fail.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
The zloop test has been failing in buildbot for the last few weeks
with various failures in ztest_deadman_thread(). This is due to the
fact that this thread is not stopped when performing pool import /
export tests as it should be. This patch simply corrects this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010
Porting Notes:
- Most of these fixes were applied in the original 37fb3e43
commit when this change was ported for Linux.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9688
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bf2d68beCloses#8042
Currently, if a resilver is triggered for any reason while an
existing one is running, zfs will immediately restart the existing
resilver from the beginning to include the new drive. This causes
problems for system administrators when a drive fails while another
is already resilvering. In this case, the optimal thing to do to
reduce risk of data loss is to wait for the current resilver to end
before immediately replacing the second failed drive, which allows
the system to operate with two incomplete drives for the minimum
amount of time.
This patch introduces the resilver_defer feature that essentially
does this for the admin without forcing them to wait and monitor
the resilver manually. The change requires an on-disk feature
since we must mark drives that are part of a deferred resilver in
the vdev config to ensure that we do not assume they are done
resilvering when an existing resilver completes.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: @mmaybee
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7732
Since Linux does not have an in-kernel SMB server, we don't need the
code to manage it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8032
Since Linux does not have the Directory Name Lookup Cache, we don't need
the code to manage it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8031
The boolean featureflags in use thus far in ZFS are extremely useful,
but because they take advantage of the zap layer, more interesting data
than just a true/false value can be stored in a featureflag. In redacted
send/receive, this is used to store the list of redaction snapshots for
a redacted dataset.
This change adds the ability for ZFS to store types other than a boolean
in a featureflag. The only other implemented type is a uint64_t array.
It also modifies the interfaces around dataset features to accomodate
the new capabilities, and adds a few new functions to increase
encapsulation.
This functionality will be used by the Redacted Send/Receive feature.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#7981
The bug time sequence:
1. thread #1, `zfs_write` assign a txg "n".
2. In a same process, thread #2, mmap page fault (which means the
`mm_sem` is hold) occurred, `zfs_dirty_inode` open a txg failed,
and wait previous txg "n" completed.
3. thread #1 call `uiomove` to write, however page fault is occurred
in `uiomove`, which means it need `mm_sem`, but `mm_sem` is hold by
thread #2, so it stuck and can't complete, then txg "n" will
not complete.
So thread #1 and thread #2 are deadlocked.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Grady Wong <grady.w@xtaotech.com>
Closes#7939
OpenZFS 9847 - leaking dd_clones (DMU_OT_DSL_CLONES) objects
We're leaking the dd_clones objects in dsl_dir_destroy_sync. This bug
appears to have been around forever. Thankfully the amount of space
typically involved is tiny.
In addition this adds a mechanism in ZDB to find objects in the MOS
which are leaked (not referenced anywhere).
Porting notes:
* Added dd_crypto_obj to ZDB MOS object leak tracking
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
OpenZFS-issue: https://illumos.org/issues/9847Closes#7979
The vdev_checkpoint_sm_object(), vdev_obsolete_sm_object(), and
vdev_obsolete_counts_are_precise() functions assume that the
only way a zap_lookup() can fail is if the requested entry is
missing. While this is the most common cause, it's not the only
cause. Attemping to access a damaged ZAP will result in other
errors.
The most likely scenario for accessing a damaged ZAP is during
an extreme rewind pool import. Under these conditions the pool
is expected to contain damaged objects and the import code was
updated to handle this gracefully. Getting an ECKSUM error from
these ZAPs after the pool in import a far less likely, therefore
the behavior for call paths was not modified.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7809Closes#7921
The ZFS range locking code in zfs_rlock.c/h depends on ZPL-specific
data structures, specifically znode_t. However, it's also used by
the ZVOL code, which uses a "dummy" znode_t to pass to the range
locking code.
We should clean this up so that the range locking code is generic
and can be used equally by ZPL and ZVOL, and also can be used by
future consumers that may need to run in userland (libzpool) as
well as the kernel.
Porting notes:
* Added missing sys/avl.h include to sys/zfs_rlock.h.
* Removed 'dbuf is within the locked range' ASSERTs from dmu_sync().
This was needed because ztest does not yet use a locked_range_t.
* Removed "Approved by:" tag requirement from OpenZFS commit
check to prevent needless warnings when integrating changes
which has not been merged to illumos.
* Reverted free_list range lock changes which were originally
needed to defer the cv_destroy() which was called immediately
after cv_broadcast(). With d2733258 this should be safe but
if not we may need to reintroduce this logic.
* Reverts: The following two commits were reverted and squashed in
to this change in order to make it easier to apply OpenZFS 9689.
- d88895a0, which removed the dummy znode from zvol_state
- e3a07cd0, which updated ztest to use range locks
* Preserved optimized rangelock comparison function. Preserved the
rangelock free list. The cv_destroy() function will block waiting
for all processes in cv_wait() to be scheduled and drop their
reference. This is done to ensure it's safe to free the condition
variable. However, blocking while holding the rl->rl_lock mutex
can result in a deadlock on Linux. A free list is introduced to
defer the cv_destroy() and kmem_free() until after the mutex is
released.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9689
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/680
External-issue: DLPX-58662
Closes#7980
This change moves the bottom half of dmu_send.c (where the receive
logic is kept) into a new file, dmu_recv.c, and does similarly
for receive-related changes in header files.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#7982
Update arc_release to use arc_buf_size(). This hunk was accidentally
dropped when porting compressed send/recv, 2aa34383b.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8000
When debugging is enabled and a zfs_refcount_t contains multiple holders
using the same key, but different ref_counts, the wrong reference_t may
be transferred. Add a zfs_refcount_transfer_ownership_many() function,
like the existing zfs_refcount_*_many() functions, to match and transfer
the correct refcount_t;
This issue may occur when using encryption with refcount debugging
enabled. An arc_buf_hdr_t can have references for both the
hdr->b_l1hdr.b_pabd and hdr->b_crypt_hdr.b_rabd both of which use
the hdr as the reference holder. When unsharing the buffer the
p_abd should be transferred.
This issue does not impact production builds because refcount holders
are not tracked.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7219Closes#8000
The existing mechanisms for determining what code is running in the
kernel do not always correctly report the git hash. The versions
reported there do not reflect changes made since `configure` was run
(i.e. incremental builds do not update the version) and they are
misleading if git tags are not set up properly. This applies to
`modinfo zfs`, `dmesg`, and `/sys/module/zfs/version`.
There are complicated requirements on how the existing version is
generated. Therefore we are leaving that alone, and adding a new
mechanism to record and retrieve the git hash:
`cat /proc/sys/kernel/spl/gitrev`
The gitrev is re-generated at compile time, when running `make`
(including for incremental builds). The value is the output of `git
describe` (or "unknown" if not in a git repo or there are uncommitted
changes).
We're also removing /proc/sys/kernel/spl/version, which was never very
useful.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#7931Closes#7965
Porting notes:
* Renamed zfs_dirty_data_sync_pct to zfs_dirty_data_sync_percent and
changed the type to be consistent with the other dirty module params.
* Updated zfs-module-parameters.5 accordingly.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9617
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7928f4baCloses#7976
Since native ZFS encryption was merged, we have been fighting
against a series of bugs that come down to the same problem: Key
mappings (which must be present during all I/O operations) are
created and destroyed based on dataset ownership, but I/Os can
have traditionally been allowed to "leak" into the next txg after
the dataset is disowned.
In the past we have attempted to solve this problem by trying to
ensure that datasets are disowned ater all I/O is finished by
calling txg_wait_synced(), but we have repeatedly found edge cases
that need to be squashed and code paths that might incur a high
number of txg syncs. This patch attempts to resolve this issue
differently, by adding a reference to the key mapping for each txg
it is dirtied in. By doing so, we can remove many of the
unnecessary calls to txg_wait_synced() we have added in the past
and ensure we don't need to deal with this problem in the future.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7949
Authored by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9700
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/82f63c3cCloses#7973
Recent changes in the Linux kernel made it necessary to prefix
the refcount_add() function with zfs_ due to a name collision.
To bring the other functions in line with that and to avoid future
collisions, prefix the other refcount functions as well.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Closes#7963
Due to a flaw in 4589f3ae the number of unique combinations
could be calculated incorrectly. This could result in the
random combinations reconstruction being used when it would
have been possible to check all combinations.
This change fixes the unique combinations calculation and
simplifies the reconstruction logic by maintaining a per-
segment list of unique copies.
The vdev_indirect_splits_damage() function was introduced
to validate both the enumeration and random reconstruction
logic with ztest. It is implemented such it will never
make a known recoverable block unrecoverable.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #6900Closes#7934
There are some issues with the way the seq_file interface is implemented
for kstats backed by linked lists (zfs_dbgmsgs and certain per-pool
debugging info):
* We don't account for the fact that seq_file sometimes visits a node
multiple times, which results in missing messages when read through
procfs.
* We don't keep separate state for each reader of a file, so concurrent
readers will receive incorrect results.
* We don't account for the fact that entries may have been removed from
the list between read syscalls, so reading from these files in procfs
can cause the system to crash.
This change fixes these issues and adds procfs_list, a wrapper around a
linked list which abstracts away the details of implementing the
seq_file interface for a list and exposing the contents of the list
through procfs.
Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1211
Closes#7819
torvalds/linux@59b57717f ("blkcg: delay blkg destruction until
after writeback has finished") added a refcount_t to the blkcg
structure. Due to the refcount_t compatibility code, zfs_refcount_t
was used by mistake.
Resolve this by removing the compatibility code and replacing the
occurrences of refcount_t with zfs_refcount_t.
Reviewed-by: Franz Pletz <fpletz@fnordicwalking.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Closes#7885Closes#7932
When zfs_kobj_init() is called with an attr_cnt of 0 only the
kobj->zko_default_attrs is allocated. It subsequently won't
get freed in zfs_kobj_release since the free is wrapped in
a kobj->zko_attr_count != 0 conditional.
Split the block in zfs_kobj_release() to make sure the
kobj->zko_default_attrs are freed in this case.
Additionally, fix a minor spelling mistake and typo in
zfs_kobj_init() which could also cause a leak but in practice
is almost certain not to fail.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7957
When handling a 32-bit statfs() system call the returned fields,
although 64-bit in the kernel, must be limited to 32-bits or an
EOVERFLOW error will be returned.
This is less of an issue for block counts since the default
reported block size in 128KiB. But since it is possible to
set a smaller block size, these values will be scaled as
needed to fit in a 32-bit unsigned long.
Unlike most other filesystems the total possible file counts
are more likely to overflow because they are calculated based
on the available free space in the pool. In order to prevent
this the reported value must be capped at 2^32-1. This is
only for statfs(2) reporting, there are no changes to the
internal ZFS limits.
Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7927Closes#7122Closes#7937
Currently vdev_disk_error() prepends its messages sent to the internal
ZFS debug log with KERN_WARNING, which is currently defined as follows:
#define KERN_SOH "\001"
#define KERN_WARNING KERN_SOH "4"
Since "\001" (ASCII Start Of Header) is not printable this results in
weird characters displayed when inspecting the debug log. This commit
simply removes this superfluous prefix passed to zfs_dbgmsg().
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7936
This change adds limits to the possible spa_slop_shift values set via
the sysfs interface. Accepted values are from a minimum of 1 to a
maximum of 31 (inclusive): these limits are based on the following
values observed on a 128PB file-vdev test pool:
spa_slop_shift=1, spa_get_slop_space=63.5PiB
spa_slop_shift=2, spa_get_slop_space=31.8PiB
spa_slop_shift=3, spa_get_slop_space=15.9PiB
spa_slop_shift=4, spa_get_slop_space=7.9PiB
spa_slop_shift=5, spa_get_slop_space=4PiB
spa_slop_shift=6, spa_get_slop_space=2PiB
...
spa_slop_shift=25, spa_get_slop_space=4GiB
spa_slop_shift=26, spa_get_slop_space=2GiB
spa_slop_shift=27, spa_get_slop_space=1016MiB
spa_slop_shift=28, spa_get_slop_space=508MiB
spa_slop_shift=29, spa_get_slop_space=254MiB
spa_slop_shift=30, spa_get_slop_space=128MiB
spa_slop_shift=31, spa_get_slop_space=128MiB
spa_slop_shift=32, spa_get_slop_space=128MiB
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7876Closes#7900
Added vdev_resilver_needed() check to verify VDEVs are fully
synced, so that after split the new pool will not be corrupted.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Roman Strashkin <roman.strashkin@nexenta.com>
Closes#7865Closes#7881
The recent sysfs zfs properties feature breaks the in-kernel
builds of zfs (sans module). When not built as a module add
the sysfs entries under /sys/fs/zfs/.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7868Closes#7872
The ZTS zfs_sysfs_live test fails occasionally due to an uninitialized
string on an error path.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7869
Allocation Classes add the ability to have allocation classes in a
pool that are dedicated to serving specific block categories, such
as DDT data, metadata, and small file blocks. A pool can opt-in to
this feature by adding a 'special' or 'dedup' top-level VDEV.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Reviewed-by: Andreas Dilger <andreas.dilger@chamcloud.com>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Gregor Kopka <gregor@kopka.net>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#5182
As a regular kernel function, kern_path() returns errors as negative
errnos, such as -ELOOP. zfsctl_snapdir_vget() must convert these into
the positive errnos used throughout the ZFS code when it returns them
to other ZFS functions so that the ZFS code properly sees them as
errors.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Siebenmann <cks.git01@cs.toronto.edu>
Closes#7764Closes#7864
Re-adds a recalculation step for the ARC stats after the MRU
eviction so that we don't pathologically attempt to evict the MFU.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Mark Johnston <markj@freebsd.org>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#7855
This reverts commit a6214a0ae9.
Disabling zfs_admin_snapshot by default results in multiple ZTS
tests failing which depend on this functionality. Revert this
change until the relevant test cases can be updated.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7838
It's disabled by default, update code to reflect
the documentation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gregor Kopka <gregor@kopka.net>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#7835Closes#7838
Relax allocation throttling for ditto blocks. Due to random imbalances
in allocation it tends to push block copies to one vdev, that looks
slightly better at the moment. Slightly less strict policy allows both
improve data security and surprisingly write performance, since we don't
need to touch extra metaslabs on each vdev to respect the min distance.
Sponsored by: iXsystems, Inc.
Authored by: mav <mav@FreeBSD.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9751
FreeBSD-commit: https://github.com/freebsd/freebsd/commit/8253837ac3Closes#7857
Use METASLAB_WEIGHT_CLAIM weight to allocate tertiary blocks.
Previous use of METASLAB_WEIGHT_SECONDARY for that caused errors
later on metaslab_activate_allocator() call, leading to massive
load of unneeded metaslabs and write freezes.
Authored by: mav <mav@FreeBSD.org>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9738
FreeBSD-commit: https://github.com/freebsd/freebsd/commit/63e7138Closes#7858
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7780
This extends our sysfs '/sys/module/zfs' entry to include feature
and property attributes. The primary consumer of this information
is user processes, like the zfs CLI, that need to know what the
current loaded ZFS module supports. The libzfs binary will consult
this information when instantiating the zfs and zpool property
tables and the pool features table.
This introduces 4 kernel objects (dirs) into '/sys/module/zfs'
with corresponding attributes (files):
features.runtime
features.pool
properties.dataset
properties.pool
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7706
The checkpoint space map object may not be accessible from the
vdev's ZAP when it has been damaged. This may be the case when
performing an extreme rewind when importing the pool.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7809Closes#7853
We can simplify the dbuf_hold code by allocating dbuf_hold_arg_t's on
demand, rather than allocating a big array of them up front. While this
can occasionally increase the number of allocations, typically only one
allocation is needed since the indirect block is already cached.
The performance test suite gets the same results with this change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#7841
Assertion failed in arc_buf_destroy() when concurrently reading
block with checksum error.
Porting notes:
* The ability to zinject decompression errors has been added, but
this only works at the zio_decompress() level, where we have all
of the info we need to match against the user's zinject options.
* The decompress_fault test has been added to test the new zinject
functionality
* We attempted to set zio_decompress_fail_fraction to (1 << 18) in
ztest for further test coverage. Although this did uncover a few
low priority issues, this unfortuantely also causes ztest to
ASSERT in many locations where the code is working correctly since
it is designed to fail on IO errors. Developers can manually set
this variable with the '-o' option to find and debug issues.
Authored by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Tom Caputi <tcaputi@datto.com>
OpenZFS-issue: https://illumos.org/issues/9403
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/fa98e487a9Closes#7822
Currently, when unmounting a filesystem, ZFS will only wait for
a txg sync if the dataset is dirty and not readonly. However, this
can be problematic in cases where a dataset is remounted readonly
immediately before being unmounted, which often happens when the
system is being shut down. Since encrypted datasets require that
all I/O is completed before the dataset is disowned, this issue
causes problems when write I/Os leak into the txgs after the
dataset is disowned, which can happen when sync=disabled.
While looking into fixes for this issue, it was discovered that
dsl_dataset_is_dirty() does not return B_TRUE when the dataset has
been removed from the txg dirty datasets list, but has not actually
been processed yet. Furthermore, the implementation is comletely
different from dmu_objset_is_dirty(), adding to the confusion.
Rather than relying on this function, this patch forces the umount
code path (and the remount readonly code path) to always perform a
txg sync on read-write datasets and removes the function altogether.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7753Closes#7795
This patch simply adds some missing locking to the txg_list
functions and refactors txg_verify() so that it is only compiled
in for debug builds.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7795
Direct IO via the O_DIRECT flag was originally introduced in XFS by
IRIX for database workloads. Its purpose was to allow the database
to bypass the page and buffer caches to prevent unnecessary IO
operations (e.g. readahead) while preventing contention for system
memory between the database and kernel caches.
On Illumos, there is a library function called directio(3C) that
allows user space to provide a hint to the file system that Direct IO
is useful, but the file system is free to ignore it. The semantics
are also entirely a file system decision. Those that do not
implement it return ENOTTY.
Since the semantics were never defined in any standard, O_DIRECT is
implemented such that it conforms to the behavior described in the
Linux open(2) man page as follows.
1. Minimize cache effects of the I/O.
By design the ARC is already scan-resistant which helps mitigate
the need for special O_DIRECT handling. Data which is only
accessed once will be the first to be evicted from the cache.
This behavior is in consistent with Illumos and FreeBSD.
Future performance work may wish to investigate the benefits of
immediately evicting data from the cache which has been read or
written with the O_DIRECT flag. Functionally this behavior is
very similar to applying the 'primarycache=metadata' property
per open file.
2. O_DIRECT _MAY_ impose restrictions on IO alignment and length.
No additional alignment or length restrictions are imposed.
3. O_DIRECT _MAY_ perform unbuffered IO operations directly
between user memory and block device.
No unbuffered IO operations are currently supported. In order
to support features such as transparent compression, encryption,
and checksumming a copy must be made to transform the data.
4. O_DIRECT _MAY_ imply O_DSYNC (XFS).
O_DIRECT does not imply O_DSYNC for ZFS. Callers must provide
O_DSYNC to request synchronous semantics.
5. O_DIRECT _MAY_ disable file locking that serializes IO
operations. Applications should avoid mixing O_DIRECT
and normal IO or mmap(2) IO to the same file. This is
particularly true for overlapping regions.
All I/O in ZFS is locked for correctness and this locking is not
disabled by O_DIRECT. However, concurrently mixing O_DIRECT,
mmap(2), and normal I/O on the same file is not recommended.
This change is implemented by layering the aops->direct_IO operations
on the existing AIO operations. Code already existed in ZFS on Linux
for bypassing the page cache when O_DIRECT is specified.
References:
* http://xfs.org/docs/xfsdocs-xml-dev/XFS_User_Guide/tmp/en-US/html/ch02s09.html
* https://blogs.oracle.com/roch/entry/zfs_and_directio
* https://ext4.wiki.kernel.org/index.php/Clarifying_Direct_IO's_Semantics
* https://illumos.org/man/3c/directio
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#224Closes#7823
Fix a bunch of truncation compiler warnings that show up
on Fedora 28 (GCC 8.0.1).
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7368Closes#7826Closes#7830
Using VERIFY3S allows to view the unexpected error value in the system
log.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #7809Closes#7818
This patch fixes 2 issues with raw, deduplicated send streams. The
first is that datasets who had been completely received earlier in
the stream were not still marked as raw receives. This caused
problems when newly received datasets attempted to fetch raw data
from these datasets without this flag set.
The second problem was that the arc freeze checksum code was not
consistent about which locks needed to be held while performing
its asserts. The proper locking needed to run these asserts is
actually fairly nuanced, since the asserts touch the linked list
of buffers (requiring the header lock), the arc_state (requiring
the b_evict_lock), and the b_freeze_cksum (requiring the
b_freeze_lock). This seems like a large performance sacrifice and
a lot of unneeded complexity to verify that this relatively small
debug feature is working as intended, so this patch simply removes
these asserts instead.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7701
The following patch introduces a few statistics on reads and writes
grouped by dataset. These statistics are implemented as kstats
(backed by aggregate sums for performance) and can be retrieved by
using the dataset objset ID number. The motivation for this change is
to provide some preliminary analytics on dataset usage/performance.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#7705
The error path must free the memory allocated by this function or
it will be leaked. In practice, this would leak only a few bytes
of memory under rare circumstances and thus is unlikely to have
caused any real problems. This issue was caught by the kmemleak.
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7791
This patch fixes a bug where attempting to receive a send stream
with embedded data into an encrypted dataset would not cleanup
that dataset when the error was reached. The check was moved into
dmu_recv_begin_check(), preventing this issue.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7650
One small integration that was absent from b52563 was
support for zfs recv -o / -x with regards to encryption
parameters. The main use cases of this are as follows:
* Receiving an unencrypted stream as encrypted without
needing to create a "dummy" encrypted parent so that
encryption can be inheritted.
* Allowing users to change their keylocation on receive,
so long as the receiving dataset is an encryption root.
* Allowing users to explicitly exclude or override the
encryption property from an unencrypted properties stream,
allowing it to be received as encrypted.
* Receiving a recursive heirarchy of unencrypted datasets,
encrypting the top-level one and forcing all children to
inherit the encryption.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7650
Fix comment on calculating blkid at level n within dnode's blkptrs.
"(2^(level*(indblkshift - SPA_BLKPTRSHIFT)" is part of divisor
in this division.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#7768
This change modifies how 'checksum' and 'dedup' properties are verified
in zfs_check_settable() handling the case where they are explicitly
inherited in the dataset hierarchy when receiving a recursive send
stream.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7755Closes#7576Closes#7757
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7759
When doing a read from disk, ZFS creates 3 ZIO's: a zio_null(), the
logical zio_read(), and then a physical zio. Currently, each of these
results in a separate taskq_dispatch(zio_execute).
On high-read-iops workloads, this causes a significant performance
impact. By processing all 3 ZIO's in a single taskq entry, we reduce the
overhead on taskq locking and context switching. We accomplish this by
allowing zio_done() to return a "next zio to execute" to zio_execute().
This results in a ~12% performance increase for random reads, from
96,000 iops to 108,000 iops (with recordsize=8k, on SSD's).
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-59292
Closes#7736
Linux specific zpl_* entry points, such as xattrs, must include
the same unmounted and sa handle checks as the common zfs_ entry
points. The additional ZPL_* wrappers are identical to their
ZFS_ counterparts except the errno is negated since they are
expected to be used at the zpl_ layer.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
Closes#5866Closes#7761
- Add two new module parameters to icp (icp_aes_impl, icp_gcm_impl)
that control the crypto implementation. At the moment there is a
choice between generic and aesni (on platforms that support it).
- This enables support for AES-NI and PCLMULQDQ-NI on AMD Family
15h (bulldozer) and newer CPUs (zen).
- Modify aes_key_t to track what implementation it was generated
with as key schedules generated with various implementations
are not necessarily interchangable.
Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Nathaniel R. Lewis <linux.robotdude@gmail.com>
Closes#7102Closes#7103
This change reintroduces logic required by OpenZFS 9577. When
OpenZFS 9337, zfs get all is slow due to uncached metadata, was
merged in it ended up removing logic required by OpenZFS 9577,
remove zfs_dbuf_evict_key, and inadvertently reintroduced the
bug that 9577 was designed to fix.
This change re-enables the "evicting" flag to dbuf_rele_and_unlock
and dnode_rele_and_unlock and updates all callers to provide the
correct parameter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <george.wilson@delphix.com>
Closes#7758
zfs umount -> zfsctl_destroy() takes the zfs_snapshot_lock as a
writer and calls zfsctl_snapshot_unmount_cancel(), which waits
for snapentry_expire() if present (when snap is automounted).
This snapentry_expire() itself then waits for zfs_snapshot_lock
as a reader, resulting in a deadlock.
The fix is to only hold the zfs_snapshot_lock over the tree
lookup and removal. After a successful lookup the lock can
be dropped and zfs_snapentry_t will remain valid until the
reference taken by the lookup is released.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rohan Puri <rohan.puri15@gmail.com>
Closes#7751Closes#7752
Overview
========
We parallelize the allocation process by creating the concept of
"allocators". There are a certain number of allocators per metaslab
group, defined by the value of a tunable at pool open time. Each
allocator for a given metaslab group has up to 2 active metaslabs; one
"primary", and one "secondary". The primary and secondary weight mean
the same thing they did in in the pre-allocator world; primary metaslabs
are used for most allocations, secondary metaslabs are used for ditto
blocks being allocated in the same metaslab group. There is also the
CLAIM weight, which has been separated out from the other weights, but
that is less important to understanding the patch. The active metaslabs
for each allocator are moved from their normal place in the metaslab
tree for the group to the back of the tree. This way, they will not be
selected for use by other allocators searching for new metaslabs unless
all the passive metaslabs are unsuitable for allocations. If that does
happen, the allocators will "steal" from each other to ensure that IOs
don't fail until there is truly no space left to perform allocations.
In addition, the alloc queue for each metaslab group has been broken
into a separate queue for each allocator. We don't want to dramatically
increase the number of inflight IOs on low-end systems, because it can
significantly increase txg times. On the other hand, we want to ensure
that there are enough IOs for each allocator to allow for good
coalescing before sending the IOs to the disk. As a result, we take a
compromise path; each allocator's alloc queue max depth starts at a
certain value for every txg. Every time an IO completes, we increase the
max depth. This should hopefully provide a good balance between the two
failure modes, while not dramatically increasing complexity.
We also parallelize the spa_alloc_tree and spa_alloc_lock, which cause
very similar contention when selecting IOs to allocate. This
parallelization uses the same allocator scheme as metaslab selection.
Performance Results
===================
Performance improvements from this change can vary significantly based
on the number of CPUs in the system, whether or not the system has a
NUMA architecture, the speed of the drives, the values for the various
tunables, and the workload being performed. For an fio async sequential
write workload on a 24 core NUMA system with 256 GB of RAM and 8 128 GB
SSDs, there is a roughly 25% performance improvement.
Future Work
===========
Analysis of the performance of the system with this patch applied shows
that a significant new bottleneck is the vdev disk queues, which also
need to be parallelized. Prototyping of this change has occurred, and
there was a performance improvement, but more work needs to be done
before its stability has been verified and it is ready to be upstreamed.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Porting Notes:
* Fix reservation test failures by increasing tolerance.
OpenZFS-issue: https://illumos.org/issues/9112
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3f3cc3c3Closes#7682
In the case of one pool being built on another pool, we want
to make sure we don't end up throttling the lower (backing)
pool when the upper pool is the majority contributor to dirty
data. To insure we make forward progress during throttling, we
also check the current pool's net dirty data and only throttle
if it exceeds zfs_arc_pool_dirty_percent of the anonymous dirty
data in the cache.
Authored by: Don Brady <don.brady@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
* The new global variables zfs_arc_dirty_limit_percent,
zfs_arc_anon_limit_percent, and zfs_arc_pool_dirty_percent
were intentially not added as tunable module parameters.
OpenZFS-issue: https://illumos.org/issues/9465
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d6a4c3efCloses#7749
= Motivation
While dealing with another performance issue (see 126118f) we noticed
that we spend a lot of time in various places in the kernel when
constructing long nvlists. The problem is that when an nvlist is created
with the NV_UNIQUE_NAME set (which is the case most of the time), we do
a linear search through the whole list to ensure uniqueness for every
entry we add.
An example of the above scenario can be seen in the following
flamegraph, where more than have the time of the zfsdev_ioctl() is spent
on constructing nvlists. Flamegraph:
https://sdimitro.github.io/img/flame/sdimitro_snap_unmount3.svg
Adding a table to speed up lookups will help situations where we just
construct an nvlist (like the scenario above), in addition to regular
lookups and removals.
= What this patch does
In this diff we've implemented a hash-table on top of the nvlist code
that converts most nvlist operations from O(# number of entries) to
O(1)* (the start is for amortized time as the hash-table grows and
shrinks depending on the # of entries - plain lookup is strictly O(1)).
= Performance Analysis
To analyze the performance improvement I just used the setup from the
snapshot deletion issue mentioned above in the Motivation section.
Basically I created 10K filesystems with one snapshot each and then I
just used the API of libZFS_Core to pass down an nvlist of all the
snapshots to have them deleted. The reason I used my own driver program
was to have clean performance results of what actually happens in the
kernel. The flamegraphs and wall clock times mentioned below were
gathered from the start to the end of the driver program's run. Between
trials the testpool used was completely destroyed, the system was
rebooted and the testpool was completely recreated. The reason for this
dance was to get consistent results.
== Results (before patch):
=== Sampling Flamegraphs
[Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A.svg
[Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2.svg
[Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3.svg
=== Wall clock times (in seconds)
```
[Trial 4]
real 5.3
user 0.4
sys 2.3
[Trial 5]
real 8.2
user 0.4
sys 2.4
[Trial 6]
real 6.0
user 0.5
sys 2.3
```
== Results (after patch):
=== Sampling Flamegraphs
[Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-Ae.svg
[Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2e.svg
[Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3e.svg
=== Wall clock times (in seconds)
```
[Trial 4]
real 4.9
user 0.0
sys 0.9
[Trial 5]
real 3.8
user 0.0
sys 0.9
[Trial 6]
real 3.6
user 0.0
sys 0.9
```
== Analysis
The results between the trials are consistent so in this sections I will
only talk about the flamegraph results from trial-1 and the wall-clock
results from trial-4.
From trial-1 we can see that zfs_dev_ioctl() goes from 2,331 to 996
samples counts. Specifically, the samples from fnvlist_add_nvlist() and
spa_history_log_nvl() are almost gone (~500 & ~800 to 5 & 5 samples),
leaving zfs_ioc_destroy_snaps() to dominate most samples from
zfs_dev_ioctl().
From trial-4 we see that the user time dropped to 0 secods. I believe
the consistent 0.4 seconds before my patch was applied was due to my
driver program constructing the long nvlist of snapshots so it can pass
it to the kernel. As for the system time, the effect there is more clear
(2.3 down to 0.9 seconds).
Porting Notes:
* DATA_TYPE_DONTCARE case added to switch in fm_nvprintr() and
zpool_do_events_nvprint().
Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9580
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b5eca7b1Closes#7748
Follow up commit for OpenZFS 9438. See the OpenZFS-issue link below
for a complete analysis.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9439
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/779220d
External-issue: DLPX-46861
Closes#7746
As reported by https://github.com/zfsonlinux/zfs/issues/4996, there is
yet another hole birth issue. In this one, if a block is entirely holes,
but the birth times are not all the same, we lose that information by
creating one hole with the current txg as its birth time.
The ZoL PR's fix approach is incorrect. Ultimately, the problem here is
that when you truncate and write a file in the same transaction group,
the dbuf for the indirect block will be zeroed out to deal with the
truncation, and then written for the write. During this process, we will
lose hole birth time information for any holes in the range. In the case
where a dnode is being freed, we need to determine whether the block
should be converted to a higher-level hole in the zio pipeline, and if
so do it when the dnode is being synced out.
Porting Notes:
* The DMU_OBJECT_END change in zfs_znode.c was already applied.
* Added test cases from #5675 provided by @rincebrain for hole_birth
issues. These test cases should be pushed upstream to OpenZFS.
* Updated mk_files which is used by several rsend tests so the
files created are a little more interesting and may contain holes.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9438
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/738e2a3c
External-issue: DLPX-46861
Closes#7746
The RT rwsem implementation was changed to allow multiple readers
as of the 4.9.20-rt16 patch set. This results in a build failure
because the existing implementation was forced to directly access
the rwsem structure which has changed.
While this could be accommodated by adding additional compatibility
code. This patch resolves the build issue by simply assuming the
rwsem can never be upgraded. This functionality is a performance
optimization and all callers must already handle this case.
Converting the last remaining use of __SPIN_LOCK_UNLOCKED to
spin_lock_init() was additionally required to get a clean build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7589
Porting notes:
* As of grub-2.02 these checksums are not supported. However, as
pointed out in #6501 there are alternatives such as EFISTUB which
work and have no such restriction. A warning was added to the
checksum property section of the zfs.8 man page.
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/8906
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52fCloses#6501Closes#7714
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Albert Lee <trisk@forkgnu.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Updates to indirect blocks of spacemaps can contribute significantly to
write inflation. Therefore we want to reduce the indirect block size of
spacemaps from 128K to 16K.
Porting notes:
* Refactored to allow the dmu_object_alloc(), dmu_object_alloc_ibs()
and dmu_object_alloc_dnsize() functions to use a common shared
dmu_object_alloc_impl() function.
OpenZFS-issue: https://www.illumos.org/issues/9442
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0c2e6408bCloses#7712
It is helpful to tune zfs_per_txg_dirty_frees_percent for commit
539d33c7(OpenZFS 6569 - large file delete can starve out write ops).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Feng Sun <loyou85@gmail.com>
Closes#7718
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
While investigating a different problem, I noticed that moved dnodes
(those processed by dnode_move_impl() via kmem_move()) have an incorrect
dn_next_type. This could cause the on-disk dn_type to be changed to an
invalid value. The fix to copy the dn_next_type in dnode_move_impl().
Porting notes:
* For the moment this potential issue cannot occur on Linux since
the SPL does not provide the kmem_move() functionality.
OpenZFS-issue: https://illumos.org/issues/9338
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0717e6f13Closes#7715
The arc_hdr_realloc_crypt() function is responsible for converting
a "full" arc header to an extended "crypt" header and visa versa.
This code was originally written with a bcopy() so that any new
members added to arc headers would automatically be included
without requiring a code change. However, in practice this (along
with small differences in kmem_cache implementations between
various platforms) has caused a number of hard-to-find problems in
ports to other operating systems. This patch solves this problem
by making all member copies explicit and adding ASSERTs for fields
that cannot be set during the transfer. It also manually resets the
old header after the reallocation is finished so it can be properly
reallocated and reused.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7711
We were doing count_block() twice inside this function, once
unconditionally at the beginning (intended to catch the embedded block
case) and once near the end after processing the block.
The double-accounting caused the "zpool scrub" progress statistics in
"zpool status" to climb from 0% to 200% instead of 0% to 100%, and
showed double the I/O rate it was actually seeing.
This was apparently a regression introduced in commit 00c405b4b5,
which was an incorrect port of this OpenZFS commit:
https://github.com/openzfs/openzfs/commit/d8a447a7
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Closes#7720Closes#7738
While the autoexpand property may seem like a small feature it
depends on a significant amount of system infrastructure. Enough
of that infrastructure is now in place that with a few modifications
for Linux it can be supported.
Auto-expand works as follows; when a block device is modified
(re-sized, closed after being open r/w, etc) a change uevent is
generated for udev. The ZED, which is monitoring udev events,
passes the change event along to zfs_deliver_dle() if the disk
or partition contains a zfs_member as identified by blkid.
From here the device is matched against all imported pool vdevs
using the vdev_guid which was read from the label by blkid. If
a match is found the ZED reopens the pool vdev. This re-opening
is important because it allows the vdev to be briefly closed so
the disk partition table can be re-read. Otherwise, it wouldn't
be possible to report the maximum possible expansion size.
Finally, if the property autoexpand=on a vdev expansion will be
attempted. After performing some sanity checks on the disk to
verify that it is safe to expand, the primary partition (-part1)
will be expanded and the partition table updated. The partition
is then re-opened (again) to detect the updated size which allows
the new capacity to be used.
In order to make all of the above possible the following changes
were required:
* Updated the zpool_expand_001_pos and zpool_expand_003_pos tests.
These tests now create a pool which is layered on a loopback,
scsi_debug, and file vdev. This allows for testing of non-
partitioned block device (loopback), a partition block device
(scsi_debug), and a file which does not receive udev change
events. This provided for better test coverage, and by removing
the layering on ZFS volumes there issues surrounding layering
one pool on another are avoided.
* zpool_find_vdev_by_physpath() updated to accept a vdev guid.
This allows for matching by guid rather than path which is a
more reliable way for the ZED to reference a vdev.
* Fixed zfs_zevent_wait() signal handling which could result
in the ZED spinning when a signal was not handled.
* Removed vdev_disk_rrpart() functionality which can be abandoned
in favor of kernel provided blkdev_reread_part() function.
* Added a rwlock which is held as a writer while a disk is being
reopened. This is important to prevent errors from occurring
for any configuration related IOs which bypass the SCL_ZIO lock.
The zpool_reopen_007_pos.ksh test case was added to verify IO
error are never observed when reopening. This is not expected
to impact IO performance.
Additional fixes which aren't critical but were discovered and
resolved in the course of developing this functionality.
* Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for
ZFS volumes. This is as good as a unique physical path, while the
volumes are not used in the test cases anymore for other reasons
this improvement was included.
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#120Closes#2437Closes#5771Closes#7366Closes#7582Closes#7629
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much). There are two parts:
The dbuf_metadata_cache. We identify what to put into the cache based on
the object type of each dbuf. Caching objset properties os
{version,normalization,utf8only,casesensitivity} in the objset_t. The reason
these needed to be cached is that although they are queried frequently,
they aren't stored in a dbuf type which we can easily recognize and cache in
the dbuf layer; instead, we have to explicitly store them. There's already
existing infrastructure for maintaining cached properties in the objset
setup code, so I simply used that.
Performance Testing:
- Disabled kmem_flags
- Tuned dbuf_cache_max_bytes very low (128K)
- Tuned zfs_arc_max very low (64M)
Created test pool with 400 filesystems, and 100 snapshots per filesystem.
Later on in testing, added 600 more filesystems (with no snapshots) to make
sure scaling didn't look different between snapshots and filesystems.
Results:
| Test | Time (trunk / diff) | I/Os (trunk / diff) |
+------------------------+---------------------+---------------------+
| zpool import | 0:05 / 0:06 | 12.9k / 12.9k |
| zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k |
| zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k |
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
OpenZFS-issue: https://illumos.org/issues/9337
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52fCloses#7668
Commit 93b43af10 inadvertently introduced the following scenario which
can result in a deadlock. This issue was most easily reproduced by
LXD containers using a ZFS storage backend but should be reproducible
under any workload which is frequently mounting and unmounting.
-- THREAD A --
spa_sync()
spa_sync_upgrades()
rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); <- Waiting on B
-- THREAD B --
mount_fs()
zpl_mount()
zpl_mount_impl()
dmu_objset_hold()
dmu_objset_hold_flags()
dsl_pool_hold()
dsl_pool_config_enter()
rrw_enter(&dp->dp_config_rwlock, RW_READER, tag);
sget()
sget_userns()
grab_super()
down_write(&s->s_umount); <- Waiting on C
-- THREAD C --
cleanup_mnt()
deactivate_super()
down_write(&s->s_umount);
deactivate_locked_super()
zpl_kill_sb()
kill_anon_super()
generic_shutdown_super()
sync_filesystem()
zpl_sync_fs()
zfs_sync()
zil_commit()
txg_wait_synced() <- Waiting on A
Reviewed by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7598Closes#7659Closes#7691Closes#7693
Update the SA_COPY_DATA macro to check if architecture supports
efficient unaligned memory accesses at compile time. Otherwise
fallback to using the sa_copy_data() function.
The kernel provided CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is
used to determine availability in kernel space. In user space
the x86_64, x86, powerpc, and sometimes arm architectures will
define the HAVE_EFFICIENT_UNALIGNED_ACCESS macro.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7642Closes#7684
Ztest failed with the following crash.
::status
debugging core file of ztest (64-bit) from clone-dc-slave-280-bc7947b1.dcenter
file: /usr/bin/amd64/ztest
initial argv: /usr/bin/amd64/ztest
threading model: raw lwps
status: process terminated by SIGABRT (Abort), pid=2150 uid=1025 code=-1
panic message: failure for thread 0xfffffd7fff112a40, thread-id 1: unprotected error in call to Lua API (Invalid
value type 'function' for key 'error')
::stack
libc.so.1`_lwp_kill+0xa()
libc.so.1`_assfail+0x182(fffffd7fffdfe8d0, 0, 0)
libc.so.1`assfail+0x19(fffffd7fffdfe8d0, 0, 0)
libzpool.so.1`vpanic+0x3d(fffffd7ffaa58c20, fffffd7fffdfeb00)
0xfffffd7ffaa28146()
0xfffffd7ffaa0a109()
libzpool.so.1`luaD_throw+0x86(3011a48, 2)
0xfffffd7ffa9350d3()
0xfffffd7ffa93e3f1()
libzpool.so.1`zcp_lua_to_nvlist+0x33(3011a48, 1, 2686470, fffffd7ffaa2e2c3)
libzpool.so.1`zcp_convert_return_values+0xa4(3011a48, 2686470, fffffd7ffaa2e2c3, fffffd7fffdfedd0)
libzpool.so.1`zcp_pool_error+0x59(fffffd7fffdfedd0, 1e0f450)
libzpool.so.1`zcp_eval+0x6f8(1e0f450, fffffd7ffaa483f8, 1, 0, 6400000, 1d33b30)
libzpool.so.1`dsl_destroy_snapshots_nvl+0x12c(2786b60, 0, 484750)
libzpool.so.1`dsl_destroy_snapshot+0x4f(fffffd7fffdfef70, 0)
ztest_dsl_dataset_cleanup+0xea(fffffd7fffdff4c0, 1)
ztest_dataset_destroy+0x53(1)
ztest_run+0x59f(fffffd7fff0e0498)
main+0x7ff(1, fffffd7fffdffa88)
_start+0x6c()
The problem is that zcp_convert_return_values() assumes that there's
exactly one value on the stack, but that isn't always true. It ends up
putting the wrong thing on the stack which is then consumed by
zcp_convert_return values, which either adds the wrong message to the
nvlist, or blows up.
The fix is to make sure that callers of zcp_convert_return_values()
clear the stack before pushing their error message, and
zcp_convert_return_values() should VERIFY that the stack is the expected
size.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
OpenZFS-issue: https://www.illumos.org/issues/9424
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/eb7e57429Closes#7696
When we do a scrub or resilver, ZFS counts the different types of blocks,
which can be printed by the ::zfs_blkstats mdb dcmd. However, it fails to
count embedded blocks.
Porting notes:
* Commit d4a72f23 moved count_blocks under a BP_IS_EMBEDDED conditional
as part of the sequential resilver functionality. Since phys_birth
would be zero that case should never happen as described above. This
is confirmed by the code coverage analysis. Remove the conditional
to realign that aspect of this function with OpenZFS.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
OpenZFS-issue: https://www.illumos.org/issues/9454
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d8a447a7Closes#7697
Problem
=======
Illumos bug 8373 was integrated, which now presents a code path where
"dmu_tx_assign" can fail. When "dmu_tx_assign" fails, it will not issue
the lwb that was passed in to "zil_lwb_write_issue". As a result, when
"zil_lwb_write_issue" returns, the lwb will still be in the "opened"
state, just as it was when "zil_lwb_write_issue" was originally called.
Solution
========
As a result of this new call path, the failed assertion needs to be
modified to be aware of this new possibility. Thus, we can only assert
that the lwb is no longer in the "opened" state if the returned lwb is
non-null, since we cannot differentiate between the case of
"dmu_tx_assign" failing or "zio_alloc_zil" failing within the call to
"zil_lwb_write_issue".
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Matt Ahrens <mahrens@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/9456
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a8b09f4eCloses#7695
Datasets that are deeply nested (~100 levels) are impractical. We just
put a limit of 50 levels to newly created datasets. Existing datasets
should work without a problem.
The problem can be seen by attempting to create a dataset using the -p
option with many levels:
panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff
fffffffffbc3aa60 unix:die+100 ()
fffffffffbc3ab70 unix:trap+157d ()
ffffff00083d7020 unix:_patch_xrstorq_rbx+196 ()
ffffff00083d7050 zfs:dbuf_rele+2e ()
...
ffffff00083d7080 zfs:dsl_dir_close+32 ()
ffffff00083d70b0 zfs:dsl_dir_evict+30 ()
ffffff00083d70d0 zfs:dbuf_evict_user+4a ()
ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 ()
ffffff00083d7130 zfs:dbuf_rele+2e ()
... The block above repeats once per directory in the ...
... create -p command, working towards the root ...
ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 ()
ffffff00083dba20 zfs:dsl_dataset_rele+42 ()
ffffff00083dba70 zfs:dmu_objset_prefetch+e4 ()
ffffff00083dbaa0 zfs:findfunc+23 ()
ffffff00083dbb80 zfs:dmu_objset_find_spa+38c ()
ffffff00083dbbc0 zfs:dmu_objset_find+40 ()
ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b ()
ffffff00083dbcc0 zfs:zfsdev_ioctl+347 ()
ffffff00083dbd00 genunix:cdev_ioctl+45 ()
ffffff00083dbd40 specfs:spec_ioctl+5a ()
ffffff00083dbdc0 genunix:fop_ioctl+7b ()
ffffff00083dbec0 genunix:ioctl+18e ()
ffffff00083dbf10 unix:brand_sys_sysenter+1c9 ()
Porting notes:
* Added zfs_max_dataset_nesting module option with documentation.
* Updated zfs_rename_014_neg.ksh for Linux.
* Increase the zfs.sh stack warning to 15K. Enough time has passed
that 16K can be reasonably assumed to be the default value. It
was increased in the 3.15 kernel released in June of 2014.
Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
OpenZFS-issue: https://www.illumos.org/issues/9330
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75aCloses#7681
Motivation
==========
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
New encoding
============
The layout can be found at space_map.h and it remains backwards compatible with
the old one. The introduced two-word entry format, besides extending the limits
imposed by the single-entry layout, also includes a vdev field and some extra
padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps (expected to be used in the log spacemap project).
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and we wanted to fit the vdev field
in the space map. In addition that gives us some extra bits in dva_t.
Other references:
=================
The new encoding is also discussed towards the end of the Log Space Map
presentation from 2017's OpenZFS summit.
Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d
OpenZFS-issue: https://www.illumos.org/issues/9238Closes#7665
CID 176037: Uninitialized scalar variable
This patch fixes an uninitialized variable defect caught by
coverity and introduced in 69830602
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7667
Currently, there is a bug where older send streams without the
DMU_BACKUP_FEATURE_LARGE_DNODE flag are not handled correctly.
The code in receive_object() fails to handle cases where
drro->drr_dn_slots is set to 0, which is always the case when the
sending code does not support this feature flag. This patch fixes
the issue by ensuring that that a value of 0 is treated as
DNODE_MIN_SLOTS.
Tested-by: DHE <git@dehacked.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7617Closes#7662
This patch fixes two problems with the encryption code. First, the
current code does not correctly prohibit the DMU from updating
dn_maxblkid during object truncation within a raw receive. This
usually only causes issues when the truncating DRR_FREE record is
aggregated with DRR_FREE records later in the receive, so it is
relatively hard to hit.
Second, this patch fixes a security issue where reading blocks
within an encrypted object did not guarantee that the dnode block
itself had ever been verified against its MAC. Usually the
verification happened anyway when the bonus buffer was read, but
some use cases (notably zvols) might never perform the check.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7632
Details about the motivation of this feature and its usage can
be found in this blogpost:
https://sdimitro.github.io/post/zpool-checkpoint/
A lightning talk of this feature can be found here:
https://www.youtube.com/watch?v=fPQA8K40jAM
Implementation details can be found in big block comment of
spa_checkpoint.c
Side-changes that are relevant to this commit but not explained
elsewhere:
* renames members of "struct metaslab trees to be shorter without
losing meaning
* space_map_{alloc,truncate}() accept a block size as a
parameter. The reason is that in the current state all space
maps that we allocate through the DMU use a global tunable
(space_map_blksz) which defauls to 4KB. This is ok for metaslab
space maps in terms of bandwirdth since they are scattered all
over the disk. But for other space maps this default is probably
not what we want. Examples are device removal's vdev_obsolete_sm
or vdev_chedkpoint_sm from this review. Both of these have a
1:1 relationship with each vdev and could benefit from a bigger
block size.
Porting notes:
* The part of dsl_scan_sync() which handles async destroys has
been moved into the new dsl_process_async_destroys() function.
* Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write
to block device backed pools.
* ZTS:
* Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg".
* Don't use large dd block sizes on /dev/urandom under Linux in
checkpoint_capacity.
* Adopt Delphix-OS's setting of 4 (spa_asize_inflation =
SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed
its attempts to fill the pool
* Create the base and nested pools with sync=disabled to speed up
the "setup" phase.
* Clear labels in test pool between checkpoint tests to avoid
duplicate pool issues.
* The import_rewind_device_replaced test has been marked as "known
to fail" for the reasons listed in its DISCLAIMER.
* New module parameters:
zfs_spa_discard_memory_limit,
zfs_remove_max_bytes_pause (not documented - debugging only)
vdev_max_ms_count (formerly metaslabs_per_vdev)
vdev_min_ms_count
Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/9166
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8Closes#7570
ms_shift can be incorrectly changed changed in MOS config for
indirect vdevs that have been historically expanded
According to spa_config_update() we expect new vdevs to have
vdev_ms_array equal to 0 and then we go ahead and set their metaslab
size. The problem is that indirect vdevs also have vdev_ms_array == 0
because their metaslabs are destroyed once their removal is done.
As a result, if a vdev was expanded and then removed may have its
ms_shift changed if another vdev was added after its removal.
Fortunately this behavior does not cause any type of crash or bad
behavior in the kernel but it can confuse zdb and anyone doing any kind
of analysis of the history of the pools.
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/651
OpenZFS-issue: https://illumos.org/issues/9591a
External-issue: DLPX-58879
Closes#7644
For zio taskq's which have multiple instances (e.g. z_rd_int_0,
z_rd_int_1, etc), each one has a unique name (the _0, _1, _2 suffix).
This makes performance analysis more difficult, because by default,
`perf` includes the thread name (which is the same as the taskq name) in
the stack trace. This means that we get 8 different stacks, all of
which are doing the same thing, but are executed from different taskq's.
We should remove the suffix of the taskq name, so that all the
read-interrupt threads are named z_rd_int.
Note that we already support multiple taskq's with the same name. This
happens when there are multiple pools. In this case the taskq has a
different tq_instance, which shows up in /proc/spl/taskq-all.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#7646
The blk_queue_stackable() function was replaced in the 4.14 kernel
by queue_is_rq_based(), commit torvalds/linux@5fdee212. This change
resulted in the default elevator being used which can negatively
impact performance.
Rather than adding additional compatibility code to detect the
new interface unconditionally attempt to set the elevator. Since
we expect this to fail for block devices without an elevator the
error message has been moved in to zfs_dbgmsg().
Finally, it was observed that the elevator_change() was removed
from the 4.12 kernel, commit torvalds/linux@c033269. Update the
comment to clearly specify which are expected to export the
elevator_change() symbol.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7645
Commit torvalds/linux@95582b0 changes the inode i_atime, i_mtime,
and i_ctime members form timespec's to timespec64's to make them
2038 safe. As part of this change the current_time() function was
also updated to return the timespec64 type.
Resolve this issue by introducing a new inode_timespec_t type which
is defined to match the timespec type used by the inode. It should
be used when working with inode timestamps to ensure matching types.
The timestruc_t type under Illumos was used in a similar fashion but
was specified to always be a timespec_t. Rather than incorrectly
define this type all timespec_t types have been replaced by the new
inode_timespec_t type.
Finally, the kernel and user space 'sys/time.h' headers were aligned
with each other. They define as appropriate for the context several
constants as macros and include static inline implementation of
gethrestime(), gethrestime_sec(), and gethrtime().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7643
This patch simply adds an ASSERT that confirms that the last
decrypting reference on a dataset waits until the dataset is
no longer dirty. This should help to debug issues where the
ZIO layer cannot find encryption keys after a dataset has been
disowned.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7637
This patch adds tunables for modifying the maximum memory limit and
maximum instruction limit that can be specified when running a channel
program.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1085
Closes#7618
Added support for the bops->check_events() interface which was
added in the 2.6.38 kernel to replace bops->media_changed().
Fully implementing this functionality allows the volume resize
code to rely on revalidate_disk(), which is the preferred
mechanism, and removes the need to use check_disk_size_change().
In order for bops->check_events() to lookup the zvol_state_t
stored in the disk->private_data the zvol_state_lock needs to
be held. Since the check events interface may poll the mutex
has been converted to a rwlock for better concurrently. The
rwlock need only be taken as a writer in the zvol_free() path
when disk->private_data is set to NULL.
The configure checks for the block_device_operations structure
were consolidated in a single kernel-block-device-operations.m4
file.
The ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS configure checks
and assoicated dead code was removed. This interface was added
to the 2.6.28 kernel which predates the oldest supported 2.6.32
kernel and will therefore always be available.
Updated maximum Linux version in META file. The 4.17 kernel
was released on 2018-06-03 and ZoL is compatible with the
finalized kernel.
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7611
The zfs_dbuf_evict_key TSD (thread-specific data) is not necessary -
we can instead pass a flag down in a few places to prevent recursive
dbuf eviction. Making this change has 3 benefits:
1. The code semantics are easier to understand.
2. On Linux, performance is improved, because creating/removing
TSD values (by setting to NULL vs non-NULL) is expensive, and
we do it very often.
3. According to Nexenta, the current semantics can cause a
deadlock when concurrently calling dmu_objset_evict_dbufs()
(which is rare today, but they are working on a "parallel
unmount" change that triggers this more easily):
Porting Notes:
* Minor conflict with OpenZFS 9337 which has not yet been ported.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9577
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/645
External-issue: DLPX-58547
Closes#7602
In the case where the pool is loaded without the crypto
keys necessary to playback the intent log, and log device
removal is attempted, a generic busy message is received.
Change the message to inform the user that the datasets
must be mounted.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#7518
In the new aggsum counters the CPU_SEQID macro should be surrounded by
kpreempt_disable)() and kpreempt_enable() calls to prevent a Linux
kernel BUG warning. The addsum_add() function use the cpuid to
minimize lock contention when selecting a bucket, after selection
the bucket is protected by a mutex and it is safe to reschedule the
process to a different processor at any time.
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7609Closes#7610
If sa_build_index() encounters a corrupt buffer, don't panic.
Add info to zfs ring buffer and return EIO. This allows for a cleaner
error recovery path.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Issue #6500Closes#7487
This patch fixes an issue where l2arc_read_done() would always
write data to b_pabd, even if raw encrypted data was requested.
This only occured in cases where the L2ARC device had a different
ashift than the main pool.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7586Closes#7593
This patch fixes a small bug found where receive_spill() sometimes
attempted to decrypt spill blocks when doing a raw receive. In
addition, this patch fixes another small issue in arc_buf_fill()'s
error handling where a decryption failure (which could be caused by
the first bug) would attempt to set the arc header's IO_ERROR flag
without holding the header's lock.
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7564Closes#7584Closes#7592
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Paul Dagnelie <pcd@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/8484
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7028a8b92b7
Issue #3752Closes#7462
1. Add a proc entry to display the pool's state:
$ cat /proc/spl/kstat/zfs/tank/state
ONLINE
This is done without using the spa config locks, so it will
never hang.
2. Fix 'zpool status' and 'zpool list -o health' output to print
"SUSPENDED" instead of "ONLINE" for suspended pools.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7331Closes#7563
txg_kick() fails to see that we are quiescing, forcing transactions to
their next stages without leaving them accumulate changes
Creating a fragmented pool in a DCenter VM and continuously writing to it with
multiple instances of randwritecomp, we get the following output from txg.d:
0ms 311MB in 4114ms (95% p1) 75MB/s 544MB (76%) 336us 153ms 0ms
0ms 8MB in 51ms ( 0% p1) 163MB/s 474MB (66%) 129us 34ms 0ms
0ms 366MB in 4454ms (93% p1) 82MB/s 572MB (79%) 498us 20ms 0ms
0ms 406MB in 5212ms (95% p1) 77MB/s 591MB (82%) 661us 37ms 0ms
0ms 340MB in 5110ms (94% p1) 66MB/s 622MB (86%) 1048us 41ms 1ms
0ms 3MB in 61ms ( 0% p1) 51MB/s 419MB (58%) 33us 0ms 0ms
0ms 361MB in 3555ms (88% p1) 101MB/s 542MB (75%) 335us 40ms 0ms
0ms 356MB in 4592ms (92% p1) 77MB/s 561MB (78%) 430us 89ms 1ms
0ms 11MB in 129ms (13% p1) 90MB/s 507MB (70%) 222us 15ms 0ms
0ms 281MB in 2520ms (89% p1) 111MB/s 542MB (75%) 334us 42ms 0ms
0ms 383MB in 3666ms (91% p1) 104MB/s 557MB (77%) 411us 133ms 0ms
0ms 404MB in 5757ms (94% p1) 70MB/s 635MB (88%) 1274us 123ms 2ms
4ms 367MB in 4172ms (89% p1) 88MB/s 556MB (77%) 401us 51ms 0ms
0ms 42MB in 470ms (44% p1) 90MB/s 557MB (77%) 412us 43ms 0ms
0ms 261MB in 2273ms (88% p1) 114MB/s 556MB (77%) 407us 27ms 0ms
0ms 394MB in 3646ms (85% p1) 108MB/s 552MB (77%) 393us 304ms 0ms
0ms 275MB in 2416ms (89% p1) 113MB/s 510MB (71%) 200us 53ms 0ms
0ms 9MB in 53ms ( 0% p1) 169MB/s 483MB (67%) 140us 100ms 1ms
The TXGs that are getting synced and don't have lots of changes are pushed by
txg_kick() which basically forces the current open txg to get to the quiesced
state:
if (tx->tx_syncing_txg == 0 &&
tx->tx_quiesce_txg_waiting <= tx->tx_open_txg &&
tx->tx_sync_txg_waiting <= tx->tx_synced_txg &&
tx->tx_quiesced_txg <= tx->tx_synced_txg) {
tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1;
cv_broadcast(&tx->tx_quiesce_more_cv);
}
The problem is that the above code doesn't check if we are currently quiescing
anything (only if a quiesce or a sync has been requested, ..etc) so the
following scenario can happen:
1] We have an open txg A that had enough dirty data (more than
zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened
a new txg B. No txg is currently being synced.
2] Immediately after the opening of B, txg_kick() was run by some other write
(and because of A's dirty data) and saw that we are not currently syncing
any txg and no one has requested quiescing so it requests one by bumping
tx_quiesce_txg_waiting and broadcasts the quiesce thread.
3] The quiesce thread just passed txg A to be synced and sees that a quiescing
request has been sent to it so it immediately grabs B without letting it
gather enough data, putting it in a quiesced state and opening a new txg C.
In this scenario txg B, is an example of how the entries of interest show up in
the txg.d output.
Ideally we would like txg_kick() to get triggered only when we are sure that
we are not syncing AND not quiescing any txg. This way we can kick an open TXG
to the quiescing state when we are sure that there is nothing going on and we
would benefit from the different states running concurrently.
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9464
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635bCloses#7587
We want to be able to pass various settings during import/open of a
pool, which are not only related to rewind. Instead of adding a new
policy and duplicate a bunch of code, we should just rename
rewind_policy to a more generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we
want those flags not only for the import case, but also for the open
case. One such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb)
which would allow zfs to open a pool when logs are missing.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9235
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d2b1e44Closes#7532
For the null pointer issue shown below, the solution is to initialize the
contents of the object before changing its type, so that concurrent accessors
will see it as non-zapified until it is ready for access via the ZAP.
BAD TRAP: type=e (#pf Page fault) rp=ffffff00ff520440 addr=20 occurred
in module "zfs" due to a NULL pointer dereference
ffffff00ff520320 unix:die+df ()
ffffff00ff520430 unix:trap+dc0 ()
ffffff00ff520440 unix:cmntrap+e6 ()
ffffff00ff520590 zfs:zap_leaf_lookup+46 ()
ffffff00ff520640 zfs:fzap_lookup+a9 ()
ffffff00ff5206e0 zfs:zap_lookup_norm+111 ()
ffffff00ff520730 zfs:zap_contains+42 ()
ffffff00ff520760 zfs:dsl_dataset_has_resume_receive_state+47 ()
ffffff00ff520900 zfs:get_receive_resume_stats+3e ()
ffffff00ff520a90 zfs:dsl_dataset_stats+262 ()
ffffff00ff520ac0 zfs:dmu_objset_stats+2b ()
ffffff00ff520b10 zfs:zfs_ioc_objset_stats_impl+64 ()
ffffff00ff520b60 zfs:zfs_ioc_objset_stats+33 ()
ffffff00ff520bd0 zfs:zfs_ioc_dataset_list_next+140 ()
ffffff00ff520c80 zfs:zfsdev_ioctl+4d7 ()
ffffff00ff520cc0 genunix:cdev_ioctl+39 ()
ffffff00ff520d10 specfs:spec_ioctl+60 ()
ffffff00ff520da0 genunix:fop_ioctl+55 ()
ffffff00ff520ec0 genunix:ioctl+9b ()
ffffff00ff520f10 unix:brand_sys_sysenter+1c9 ()
Porting Notes:
* DMU_OT_BYTESWAP conditional in zap_lockdir_impl() kept.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9329
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e8e0f97Closes#7578
The ZAP code was written before we allowed c99 in the Solaris kernel. We
should change it to take advantage of being able to declare variables where
they are first used. This reduces variable scope and means less scrolling
to find the type of variables.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9328
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/76ead05Closes#7578
Update bdev_capacity to have wholedisk vdevs query the
size of the underlying block device (correcting for the size
of the efi parition and partition alignment) and therefore detect
expanded space.
Correct vdev_get_stats_ex so that the expandsize is aligned
to metaslab size and new space is only reported if it is large
enough for a new metaslab.
Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
External-issue: LX-165
Closes#7546
Issue #7582
This fixes an assert in vdev_queue_change_io_priority():
VERIFY3(zio->io_priority < ZIO_PRIORITY_NUM_QUEUEABLE) failed (7 < 6)
PANIC at vdev_queue.c:832:vdev_queue_change_io_priority()
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7566Closes#7542
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.
Build system and packaging:
* Renamed SPL_* autoconf m4 macros to ZFS_*.
* Removed redundant SPL_* autoconf m4 macros.
* Updated the RPM spec files to remove SPL package dependency.
* The zfs package obsoletes the spl package, and the zfs-kmod
package obsoletes the spl-kmod package.
* The zfs-kmod-devel* packages were updated to add compatibility
symlinks under /usr/src/spl-x.y.z until all dependent packages
can be updated. They will be removed in a future release.
* Updated copy-builtin script for in-kernel builds.
* Updated DKMS package to include the spl.ko.
* Updated stale AUTHORS file to include all contributors.
* Updated stale COPYRIGHT and included the SPL as an exception.
* Renamed README.markdown to README.md
* Renamed OPENSOLARIS.LICENSE to LICENSE.
* Renamed DISCLAIMER to NOTICE.
Required code changes:
* Removed redundant HAVE_SPL macro.
* Removed _BOOT from nvpairs since it doesn't apply for Linux.
* Initial header cleanup (removal of empty headers, refactoring).
* Remove SPL repository clone/build from zimport.sh.
* Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
to build issues when forcing C99 compilation.
* Replaced legacy ACCESS_ONCE with READ_ONCE.
* Include needed headers for `current` and `EXPORT_SYMBOL`.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes#7556
Merge a minimal version of the zfsonlinux/spl repository in to the
zfsonlinux/zfs repository. Care was taken to prevent file conflicts
when merging and to preserve the spl repository history. The spl
kernel module remains under the GPLv2 license as documented by the
additional THIRDPARTYLICENSE.gplv2 file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This commit removes everything from the repository except the core
SPL implementation for Linux. Those files which remain have been
moved to non-conflicting locations to facilitate the merge.
The README.md and associated files have been updated accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Device removal allocates a new location for each allocated segment on
the disk that's being removed. Each allocation results in one entry in
the mapping table, which maps from old location + length to new
location. When a fragmented disk is removed, this can result in a large
number of mapping entries, and thus a large amount of memory consumed by
the mapping table. In the worst real-world cases, we've seen around 1GB
of RAM per 1TB of storage removed.
We can improve on this situation by allocating larger segments, which
span across both allocated and free regions of the device being removed.
By including free regions in the allocation (and thus mapping), we
reduce the number of mapping entries. For example, if we have a 4K
allocation followed by 1K free and then 4K allocated, we would allocate
4+1+4 = 9KB, and then move the entire region (including allocated and
free parts). In this case we used one mapping where previously we would
have used two, but often the ratio is much higher (up to 20:1 in
real-world use). We then need to mark the regions that were free on the
removing device as free in the new locations, and also obsolete in the
mapping entry.
This method preserves the fragmentation of the removing device, rather
than consolidating its allocated space into a small number of chunks
where possible. But it results in drastic reduction of memory used by
the mapping table - around 20x in the most-fragmented cases.
In the most fragmented real-world cases, this reduces memory used by the
mapping from ~1GB to ~50MB of RAM per 1TB of storage removed. Less
fragmented cases will typically also see around 50-100MB of RAM per 1TB
of storage.
Porting notes:
* Add the following as module parameters:
* zfs_condense_indirect_vdevs_enable
* zfs_condense_max_obsolete_bytes
* Document the following module parameters:
* zfs_condense_indirect_vdevs_enable
* zfs_condense_max_obsolete_bytes
* zfs_condense_min_mapping_bytes
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/9486
OpenZFS-commit: https://github.com/ahrens/illumos/commit/07152e142e44c
External-issue: DLPX-57962
Closes#7536
These changes were added to help debug issue #9187.
Essentially, in the original bug, vdev_validate() seems to fails in
vdev_label_read_config() and prints "failed reading config". This could
happen because either:
1. The labels are actually corrupt and zio_wait() fails for all of them
2. The labels were discarded because they didn't pass the txg check.
Beyond 9187, having debug info when case 2 happens could be useful in
other scenarios, such as zpool import.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9189
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f6af1b7Closes#7533
Add vdev_print_tree() in spa_check_for_missing_logs() when some log
devices are missing to ease debugging
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9191
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c5c02e5Closes#7531
ztest failed with uncorrectable IO error despite having the fix for
7163. Both sides of the mirror have CANT_OPEN_BAD_LABEL, which also
distinguishes it from that issue.
Definitely seems like a racing condition between the vdev_validate
and spa_sync:
1. Thread A (spa_sync): vdev label is updated to latest txg
2. Thread B (vdev_validate): vdev label's txg is compared to
spa_last_synced_txg and is ahead.
3. Thread A (spa_sync): spa_last_synced_txg is updated to latest txg.
Solution: do not check txg in vdev_validate unless config lock is held.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9187
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/805fda72Closes#7529
Generated when building on Ubuntu 18.04. Also ignore the new
dynamically generated zfs-mount-generator.8 man page, and the
module/.cache.mk file.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7534
Callbacks provided for module parameters are executed both
after the module is loaded, when a user alters it via sysfs, e.g
echo bar > /sys/modules/zfs/parameters/foo
as well as when the module is loaded with an argument, e.g.
modprobe zfs foo=bar
In the latter case, the init functions likely have not run yet,
including spa_init() which initializes the namespace lock so it is safe
to use.
Instead of immediately taking the namespace lock and attemping to
iterate over initialized spa structures, check whether spa_mode_global
is nonzero. This is set by spa_init() after it has initialized the
namespace lock.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7496Closes#7521
The zfs_deadman_failmode, zfs_deadman_ziotime_ms and
zfs_deadman_synctime_ms paramaters are stored per-pool. However,
only the zfs_deadman_failmode updates the per-pool state when it's
change. This patch gives adds the same behavior to the other two
for consistency.
Also, in all 3 three cases, only update the per-pool parameters
if spa_init() has actually been called in order to avoid panicking
when trying to take a lock on the spa_namespace_lock mutex.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#7499
Clear vdev_faulted if ZPOOL_CONFIG_AUX_STATE is not set to "external"
ZoL supports "zpool export -f" (force fault), which can be combined
with "-t" (temporary fault; don't persist across export/import) and
causes a MOS configuration to be set with ZPOOL_CONFIG_FAULTED=1
and without ZFS_CONFIG_AUX_STATE set at all. In this case, the
previously-offlined vdev should be imported in an on-line state and.
Clearing the "vdev_faulted" flag causes the import to treat the
device as on-line. Typically, resilver will catch it up based on
its DTL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#7459
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:
7638 Refactor spa_load_impl into several functions
8961 SPA load/import should tell us why it failed
7277 zdb should be able to print zfs_dbgmsg's
To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.
The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.
The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.
When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.
This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.
With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
of data, this feature is for now restricted to a read-only import.
Porting notes (ZTS):
* Fix 'make dist' target in zpool_import
* The maximum path length allowed by tar is 99 characters. Several
of the new test cases exceeded this limit resulting in them not
being included in the tarball. Shorten the names slightly.
* Set/get tunables using accessor functions.
* Get last synced txg via the "zfs_txg_history" mechanism.
* Clear zinject handlers in cleanup for import_cache_device_replaced
and import_rewind_device_replaced in order that the zpool can be
exported if there is an error.
* Increase FILESIZE to 8G in zfs-test.sh to allow for a larger
ext4 file system to be created on ZFS_DISK2. Also, there's
no need to partition ZFS_DISK2 at all. The partitioning had
already been disabled for multipath devices. Among other things,
the partitioning steals some space from the ext4 file system,
makes it difficult to accurately calculate the paramters to
parted and can make some of the tests fail.
* Increase FS_SIZE and FILE_SIZE in the zpool_import test
configuration now that FILESIZE is larger.
* Write more data in order that device evacuation take lonnger in
a couple tests.
* Use mkdir -p to avoid errors when the directory already exists.
* Remove use of sudo in import_rewind_config_changed.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/9075
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123Closes#7459
Currently `zdb` consistently fails to examine non-idle pools as it
fails during the `spa_load()` process. The main problem seems to be
that `spa_load_verify()` fails as can be seen below:
$ sudo zdb -d -G dcenter
zdb: can't open 'dcenter': I/O error
ZFS_DBGMSG(zdb):
spa_open_common: opening dcenter
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c4t11d0s0': best uberblock found for spa dcenter. txg 40824950
spa_load(dcenter): using uberblock with txg=40824950
spa_load(dcenter): UNLOADING
spa_load(dcenter): RELOADING
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c3t10d0s0': best uberblock found for spa dcenter. txg 40824952
spa_load(dcenter): using uberblock with txg=40824952
spa_load(dcenter): FAILED: spa_load_verify failed [error=5]
spa_load(dcenter): UNLOADING
This change makes `spa_load_verify()` a dryrun when ran from
`zdb`. This is done by creating a global flag in zfs and then setting
it in `zdb`.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/8962
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/180ad792Closes#7459
Problem
=======
When we fail to open or import a storage pool, we typically don't
get any additional diagnostic information, just "no pool found" or
"can not import".
While there may be no additional user-consumable information, we should
at least make this situation easier to debug/diagnose for developers
and support. For example, we could start by using `zfs_dbgmsg()`
to log each thing that we try when importing, and which things
failed. E.g. "tried uberblock of txg X from label Y of device Z". Also,
we could log each of the stages that we go through in `spa_load_impl()`.
Solution
========
Following the cleanup to `spa_load_impl()`, debug messages have been
added to every point of failure in that function. Additionally,
debug messages have been added to strategic places, such as
`vdev_disk_open()`.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/8961
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/418079e0Closes#7459
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
* Added tuning to man page.
* Test case changes dropped, default behavior unchanged.
OpenZFS-issue: https://www.illumos.org/issues/9256
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/32356b3c56Closes#7470
Creating a pool with a temporary name fails when we also specify custom
dataset properties: this is because we mistakenly call
zfs_set_prop_nvlist() on the "real" pool name which, as expected,
cannot be found because the SPA is present in the namespace with the
temporary name.
Fix this by specifying the correct pool name when setting the dataset
properties.
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7502Closes#7509
Commit 7fab6361 inadvertently disabled the MMP test cases by creating
and not removing an /etc/hostid file in the new zpool_split_props test
case. When the file exists the ZTS skips the entire MMP test group
rather than modify what may be a system which is already configured.
Update the test case to remove the file.
Additionally, because the MMP tests were disabled a regression slipped
in as part of commit 9eb7b46ed0. Fix it.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7514
9421 zdb should detect and print out the number of "leaked" objects
9422 zfs diff and zdb should explicitly mark objects that are on
the deleted queue
It is possible for zfs to "leak" objects in such a way that they are not
freed, but are also not accessible via the POSIX interface. As the only
way to know that this is happened is to see one of them directly in a
zdb run, or by noting unaccounted space usage, zdb should be enhanced to
count these objects and return failure if some are detected.
We have access to the delete queue through the zfs_get_deleteq function;
we should call it in dump_znode to determine if the object is on the
delete queue. This is not the most efficient possible method, but it is
the simplest to implement, and should suffice for the common case where
there few objects on the delete queue.
Also zfs diff and zdb currently traverse every single dnode in a dataset
and tries to figure out the path of the object by following it's parent.
When an object is placed on the delete queue, for all practical purposes
it's already discarded, it's parent might not exist anymore, and another
object might now have the object number that belonged to the parent.
While all of the above makes sense, when trying to figure out the path
of an object that is on the delete queue, we can run into issues where
either it is impossible to determine the path because the parent is
gone, or another dnode has taken it's place and thus we are returned a
wrong path.
We should therefore avoid trying to determine the path of an object on
the delete queue and mark the object itself as being on the delete queue
to avoid confusion. To achieve this, we currently have two ideas:
1. When putting an object on the delete queue, change it's parent object
number to a known constant that means NULL.
2. When displaying objects, first check if it is present on the delete
queue.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://illumos.org/issues/9421
OpenZFS-issue: https://illumos.org/issues/9422
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9caCloses#7500
While expanding stored pools, we ran into a panic using an old pool.
Steps to reproduce:
$ sudo zpool create -o version=2 test c2t1d0
$ sudo cp /etc/passwd /test/foo
$ sudo zpool attach test c2t1d0 c2t2d0
We'll get this panic:
ffffff000fc0e5e0 unix:real_mode_stop_cpu_stage2_end+b27c ()
ffffff000fc0e6f0 unix:trap+dc8 ()
ffffff000fc0e700 unix:cmntrap+e6 ()
ffffff000fc0e860 zfs:dsl_scan_visitds+1ff ()
ffffff000fc0ea20 zfs:dsl_scan_visit+fe ()
ffffff000fc0ea80 zfs:dsl_scan_sync+1b3 ()
ffffff000fc0eb60 zfs:spa_sync+435 ()
ffffff000fc0ec20 zfs:txg_sync_thread+23f ()
ffffff000fc0ec30 unix:thread_start+8 ()
The problem is a bad trap accessing a NULL pointer. We're looking for
the dp_origin_snap of a dsl_pool_t, but version 2 didn't have that. The
system will go into a reboot loop at this point, and the dump won't be
accessible except by removing the cache file from within the recovery
environment.
This impacts any sort of scrub or resilver on version <11 pools, e.g.:
$ zpool create -o version=10 test c2t1d0
$ zpool scrub test
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9443
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/010eed29Closes#7501
This patch adds the ability for zinject to trigger decryption
and authentication faults in the ZIO and ARC layers. This
functionality is exposed via the new "decrypt" error type, which
may be provided for "data" object types.
This patch also refactors some of the core encryption / decryption
functions so that they have consistent prototypes, handle errors
consistently, and do not have unused arguments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7474
As of RHEL 7.5 the mainline fops.iterate() method was added to
the file_operations structure and is correctly detected by the
configure script.
Normally this is what we want, but in order to maintain KABI
compatibility the RHEL change additionally does the following:
* Requires that callers intending to use this extended interface
set the FMODE_KABI_ITERATE flag on the file structure when
opening the directory.
* Adds the fops.iterate() method to the end of the structure,
without removing fops.readdir().
This change updates the configure check to ignore the RHEL 7.5+
variant of fops.iterate() when detected. Instead fallback to
the fops.readdir() interface which will be available.
Finally, add the 'zpl_' prefix to the directory context wrappers
to avoid colliding with the kernel provided symbols when both
the fops.iterate() and fops.readdir() are provided by the kernel.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7460Closes#7463
This patch fixes the same issue which was previously addressed in
6051. The variable "inst_num" was of the incorrect type and
"atomic_inc_32_nv()" could cause an overflow damaging its neighbor.
Cast the return value of atomic_inc_32_nv() to Cpa32U.
Fix a few types for num_inst for clarity.
Reviewed-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7468
Two deadlocks / ASSERT failures were introduced in a2c2ed1b which
would occur whenever arc_buf_fill() failed to decrypt a block of
data. This occurred because the call to arc_buf_destroy() which
was responsible for cleaning up the newly created buffer would
attempt to take out the hdr lock that it was already holding. This
was resolved by calling the underlying functions directly without
retaking the lock.
In addition, the dmu_diff() code did not properly ensure that keys
were loaded and mapped before begining dataset traversal. It turns
out that this code does not need to look at any encrypted values,
so the code was altered to perform raw IO only.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7354Closes#7456
ASSERT3U() could be NOP which then leads to having unused pointer *spa.
metaslab.c: In function 'metaslab_condense':
metaslab.c:2075:9: warning: unused variable 'spa' [-Wunused-variable]
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#7489
This commit introduces several changes:
* Update LICENSE and project information
* Give a good PEP8 talk to existing Python source code
* Add RPM/DEB packaging for pyzfs
* Fix some outstanding issues with the existing pyzfs code caused by
changes in the ABI since the last time the code was updated
* Integrate pyzfs Python unittest with the ZFS Test Suite
* Add missing libzfs_core functions: lzc_change_key,
lzc_channel_program, lzc_channel_program_nosync, lzc_load_key,
lzc_receive_one, lzc_receive_resumable, lzc_receive_with_cmdprops,
lzc_receive_with_header, lzc_reopen, lzc_send_resume, lzc_sync,
lzc_unload_key, lzc_remap
Note: this commit slightly changes zfs_ioc_unload_key() ABI. This allow
to differentiate the case where we tried to unload a key on a
non-existing dataset (ENOENT) from the situation where a dataset has
no key loaded: this is consistent with the "change" case where trying
to zfs_ioc_change_key() from a dataset with no key results in EACCES.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7230
Device removal code does not set spa_indirect_vdevs_loaded for pools
that never experienced device removal. At least one visual consequence
of it is completely blocked speculative prefetcher. This patch sets
the variable in such situations.
Authored by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9434
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/16127b627bCloses#7480
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and
rare enough to always log. It's possible that the message in
zio_dva_allocate() would be too high-frequency for zfs_dbgmsg.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Patch Notes:
* Removed ZFS_DEBUG_SPA from zfs-module-parameters.5
OpenZFS-issue: https://www.illumos.org/issues/9236
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cfaba7f668Closes#7467
Fix build errors with gcc 7.3.0 on Gentoo with kernel 4.16.3
built with CONFIG_GCC_PLUGIN_RANDSTRUCT=y such as:
module/zfs/vdev_indirect.c:296:2: error:
positional initialization of field in ‘struct’ declared with
‘designated_init’ attribute [-Werror=designated-init]
vdev_indirect_map_free,
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Mark Wright <gienah@gentoo.org>
Closes#7464
Commit cc63068 caused ENOSPC error when copy a large amount of files
between two directories. The reason is that the patch limits zap leaf
expansion to 2 retries, and return ENOSPC when failed.
The intent for limiting retries is to prevent pointlessly growing table
to max size when adding a block full of entries with same name in
different case in mixed mode. However, it turns out we cannot use any
limit on the retry. When we copy files from one directory in readdir
order, we are copying in hash order, one leaf block at a time. Which
means that if the leaf block in source directory has expanded 6 times,
and you copy those entries in that block, by the time you need to expand
the leaf in destination directory, you need to expand it 6 times in one
go. So any limit on the retry will result in error where it shouldn't.
Note that while we do use different salt for different directories, it
seems that the salt/hash function doesn't provide enough randomization
to the hash distance to prevent this from happening.
Since cc63068 has already been reverted. This patch adds it back and
removes the retry limit.
Also, as it turn out, failing on zap_add() has a serious side effect for
mzap_upgrade(). When upgrading from micro zap to fat zap, it will
call zap_add() to transfer entries one at a time. If it hit any error
halfway through, the remaining entries will be lost, causing those files
to become orphan. This patch add a VERIFY to catch it.
Reviewed-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#7401Closes#7421
This patch fixes 2 issues in how spill blocks are processed during
raw sends. The first problem is that compressed spill blocks were
using the logical length rather than the physical length to
determine how much data to dump into the send stream. The second
issue is a typo that caused the spill record's object number to be
used where the objset's ID number was required. Both issues have
been corrected, and the payload_size is now printed in zstreamdump
for future debugging.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7378Closes#7432
Currently, when the receive_object() code wants to reclaim an
object, it always assumes that the dnode is the legacy 512 bytes,
even when the incoming bonus buffer exceeds this length. This
causes a buffer overflow if --enable-debug is not provided and
triggers an ASSERT if it is. This patch resolves this issue and
adds an ASSERT to ensure this can't happen again.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7097Closes#7433
In the existing code, when doing a raw (encrypted) zfs receive,
we call arc_convert_to_raw() from open context. This creates a
race condition between arc_release()/arc_change_state() and
writing out the block from syncing context (arc_write_ready/done()).
This change makes it so that when we are doing a raw (encrypted)
zfs receive, we save the crypt parameters (salt, iv, mac) of dnode
blocks in the dbuf_dirty_record_t, and call arc_convert_to_raw()
from syncing context when writing out the block of dnodes.
Additionally, we can eliminate dr_raw and associated setters, and
instead know that dnode blocks are always raw when doing a zfs
receive (see the new field os_raw_receive).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#7424Closes#7429
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
OpenZFS-issue: https://www.illumos.org/issues/9192
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3f4c0b602dCloses#7446
Authored by: Matt Ahrens <Matt.Ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9280
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/243952cCloses#7445
This reverts commit cbb8933215.
The original change in OpenZFS 9036 did remove duplicate 'const'
specifiers, but the ZoL port had already done what *should* have been
done in OpenZFS 9036, which is to make the pointers themselves const.
The port of the change to ZoL ended up doing an unnecessary removal
of the constness of the pointers. Undo that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Closes#7444
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7638
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1fd3785ff6Closes#7437
Use an interruptible to avoid Linux hung task message in
ZTHR and to prevent inflating the load average.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#7440Closes#7441
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
* The additional instances of this typo addressed in the OpenZFS
patch were already resolved.
OpenZFS-issue: https://illumos.org/issues/9213
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/edc8ef7d92Closes#7436
The timeline of the race condition is the following:
[1] Thread A is about to finish condesing the first vdev in
spa_condense_indirect_thread(), so it calls the
spa_condense_indirect_complete_sync() sync task which sets
the spa_condensing_indirect field to NULL. Waiting for the
sync task to finish, thread A sleeps until the txg is done.
When this happens, thread A will acquire spa_async_lock and
set spa_condense_thread to NULL.
[2] While thread A waits for the txg to finish, thread B which is
running spa_sync() checks whether it should condense the
second vdev in vdev_indirect_should_condense() by checking the
spa_condensing_indirect field which was set to NULL by
spa_condense_indirect_thread() from thread A. So it goes on
and tries to spawn a new condensing thread in
spa_condense_indirect_start_sync() and the aforementioned
assertions fails because thread A has not set spa_condense_thread
to NULL (which is basically the last thing it does before returning).
The main issue here is that we rely on both spa_condensing_indirect
and spa_condense_thread to signify whether a condensing thread is
running. Ideally we would only use one throughout the codebase. In
addition, for managing spa_condense_thread we currently use
spa_async_lock which basically tights condensing to scrubing when
it comes to pausing and resuming those actions during spa export.
This commit introduces the ZTHR infrastructure, which is basically
threads created during spa_load()/spa_create() and exist until we
export or destroy the pool. ZTHRs sleep the majority of the time,
until they are notified to wake up and do some predefined type of work.
In the context of the current bug, a zthr to does the condensing of
indirect mappings replacing the older code that used bare kthreads.
When a pool is created, the condensing zthr is spawned but sleeps
right away, until it is awaken by a signal from spa_sync(). If an
existing pool is loaded, the condensing zthr looks if there is
anything to condense before going to sleep, in case we were condensing
mappings in the pool before it got exported.
The benefits of this solution are the following:
- The current bug is fixed
- spa_condensing_indirect is the sole indicator of whether we are
currently condensing or not
- condensing is more decoupled from the spa_async_thread related
functionality.
As a final note, this commit also sets up the path on upstreaming
other features that use the ZTHR code like zpool checkpoint and
fast clone deletion.
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/9079
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3dc606eeCloses#6900
Remove duplicate segment copies to minimize the possible search
space for reconstruction. Once reduced an accurate assessment can
be made regarding the difficulty in reconstructing the block.
Also, ztest will now run zdb with
zfs_reconstruct_indirect_combinations_max set to 1000000 in an attempt
to avoid checksum errors.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6900
Mirrors are supposed to provide redundancy in the face of whole-disk
failure and silent damage (e.g. some data on disk is not right, but ZFS
hasn't detected the whole device as being broken). However, the current
device removal implementation bypasses some of the mirror's redundancy.
Note that in no case is incorrect data returned, but we might get a
checksum error when we should have been able to find the right data.
There are two underlying problems:
1. When we remove a mirror device, we only read one side of the mirror.
Since we can't verify the checksum, this side may be silently bad, but
the good data is on the other side of the mirror (which we didn't read).
This can cause the removal to "bake in" the busted data – all copies of
the data in the new location are the same, busted version, while we left
the good version behind.
The fix for this is to read and copy both sides of the mirror. If the
old and new vdevs are mirrors, we will read both sides of the old
mirror, and write each copy to the corresponding side of the new mirror.
(If the old and new vdevs have a different number of children, we will
do this as best as possible.) Even though we aren't verifying checksums,
this ensures that as long as there's a good copy of the data, we'll have
a good copy after the removal, even if there's silent damage to one side
of the mirror. If we're removing a mirror that has some silent damage,
we'll have exactly the same damage in the new location (assuming that
the new location is also a mirror).
2. When we read from an indirect vdev that points to a mirror vdev, we
only consider one copy of the data. This can lead to reduced effective
redundancy, because we might read a bad copy of the data from one side
of the mirror, and not retry the other, good side of the mirror.
Note that the problem is not with the removal process, but rather after
the removal has completed (having copied correct data to both sides of
the mirror), if one side of the new mirror is silently damaged, we
encounter the problem when reading the relocated data via the indirect
vdev. Also note that the problem doesn't occur when ZFS knows that one
side of the mirror is bad, e.g. when a disk entirely fails or is
offlined.
The impact is that reads (from indirect vdevs that point to mirrors) may
return a checksum error even though the good data exists on one side of
the mirror, and scrub doesn't repair all data on the mirror (if some of
it is pointed to via an indirect vdev).
The fix for this is complicated by "split blocks" - one logical block
may be split into two (or more) pieces with each piece moved to a
different new location. In this case we need to read all versions of
each split (one from each side of the mirror), and figure out which
combination of versions results in the correct checksum, and then repair
the incorrect versions.
This ensures that we supply the same redundancy whether you use device
removal or not. For example, if a mirror has small silent errors on all
of its children, we can still reconstruct the correct data, as long as
those errors are at sufficiently-separated offsets (specifically,
separated by the largest block size - default of 128KB, but up to 16MB).
Porting notes:
* A new indirect vdev check was moved from dsl_scan_needs_resilver_cb()
to dsl_scan_needs_resilver(), which was added to ZoL as part of the
sequential scrub work.
* Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t
parameter. The extra parameter is unique to ZoL.
* When posting indirect checksum errors the ABD can be passed directly,
zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/9290
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591Closes#6900
OpenZFS 7614 - zfs device evacuation/removal
OpenZFS 9064 - remove_mirror should wait for device removal to complete
This project allows top-level vdevs to be removed from the storage pool
with "zpool remove", reducing the total amount of storage in the pool.
This operation copies all allocated regions of the device to be removed
onto other devices, recording the mapping from old to new location.
After the removal is complete, read and free operations to the removed
(now "indirect") vdev must be remapped and performed at the new location
on disk. The indirect mapping table is kept in memory whenever the pool
is loaded, so there is minimal performance overhead when doing operations
on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries
become "obsolete" because they are no longer used by any block pointers
in the pool. An entry becomes obsolete when all the blocks that use
it are freed. An entry can also become obsolete when all the snapshots
that reference it are deleted, and the block pointers that reference it
have been "remapped" in all filesystems/zvols (and clones). Whenever an
indirect block is written, all the block pointers in it will be "remapped"
to their new (concrete) locations if possible. This process can be
accelerated by using the "zfs remap" command to proactively rewrite all
indirect blocks that reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of
the data that is copied. This makes the process much faster, but if it
were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be
possible to copy the wrong data, when we have the correct data on e.g.
the other side of the mirror.
At the moment, only mirrors and simple top-level vdevs can be removed
and no removal is allowed if any of the top-level vdevs are raidz.
Porting Notes:
* Avoid zero-sized kmem_alloc() in vdev_compact_children().
The device evacuation code adds a dependency that
vdev_compact_children() be able to properly empty the vdev_child
array by setting it to NULL and zeroing vdev_children. Under Linux,
kmem_alloc() and related functions return a sentinel pointer rather
than NULL for zero-sized allocations.
* Remove comment regarding "mpt" driver where zfs_remove_max_segment
is initialized to SPA_MAXBLOCKSIZE.
Change zfs_condense_indirect_commit_entry_delay_ticks to
zfs_condense_indirect_commit_entry_delay_ms for consistency with
most other tunables in which delays are specified in ms.
* ZTS changes:
Use set_tunable rather than mdb
Use zpool sync as appropriate
Use sync_pool instead of sync
Kill jobs during test_removal_with_operation to allow unmount/export
Don't add non-disk names such as "mirror" or "raidz" to $DISKS
Use $TEST_BASE_DIR instead of /tmp
Increase HZ from 100 to 1000 which is more common on Linux
removal_multiple_indirection.ksh
Reduce iterations in order to not time out on the code
coverage builders.
removal_resume_export:
Functionally, the test case is correct but there exists a race
where the kernel thread hasn't been fully started yet and is
not visible. Wait for up to 1 second for the removal thread
to be started before giving up on it. Also, increase the
amount of data copied in order that the removal not finish
before the export has a chance to fail.
* MMP compatibility, the concept of concrete versus non-concrete devices
has slightly changed the semantics of vdev_writeable(). Update
mmp_random_leaf_impl() accordingly.
* Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool
feature which is not supported by OpenZFS.
* Added support for new vdev removal tracepoints.
* Test cases removal_with_zdb and removal_condense_export have been
intentionally disabled. When run manually they pass as intended,
but when running in the automated test environment they produce
unreliable results on the latest Fedora release.
They may work better once the upstream pool import refectoring is
merged into ZoL at which point they will be re-enabled.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Reece <alex@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/7614
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1ebCloses#6900
Currently mounting an already mounted zfs dataset results in an
error, whereas it is typically allowed with other filesystems.
This causes some bad interactions with mount namespaces. Take
this sequence for example:
- Create a dataset
- Create a snapshot of the dataset
- Create a clone of the snapshot
- Create a new mount namespace
- Rename the original dataset
The rename results in unmounting and remounting the clone in the
original mount namespace, however the remount fails because the
dataset is still mounted in the new mount namespace. (Note that
this means the mount in the new mount namespace is never being
unmounted, so perhaps the unmount/remount of the clone isn't
actually necessary.)
The problem here is a result of the way mounting is implemented
in the kernel module. Since it is not mounting block devices it
uses mount_nodev() instead of the usual mount_bdev(). However,
mount_nodev() is written for filesystems for which each mount is
a new instance (i.e. a new super block), and zfs should be able
to detect when a mount request can be satisfied using an existing
super block.
Change zpl_mount() to call sget() directly with it's own test
callback. Passing the objset_t object as the fs data allows
checking if a superblock already exists for the dataset, and in
that case we just need to return a new reference for the sb's
root dentry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Closes#5796Closes#7207
When setting `zfs_arc_max` its minimum value is allowed
to be 64 MiB. There was an off-by-1 error which can matter
on tiny systems.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Zubrzycki <github@mid-earth.net>
Closes#7417
Currently, dnode_check_slots_free() works by checking dn->dn_type
in the dnode to determine if the dnode is reclaimable. However,
there is a small window of time between dnode_free_sync() in the
first call to dsl_dataset_sync() and when the useraccounting code
is run when the type is set DMU_OT_NONE, but the dnode is not yet
evictable, leading to crashes. This patch adds the ability for
dnodes to track which txg they were last dirtied in and adds a
check for this before performing the reclaim.
This patch also corrects several instances when dn_dirty_link was
treated as a list_node_t when it is technically a multilist_node_t.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7147Closes#7388
This reverts commit cc63068e95.
Under certain circumstances this change can result in an ENOSPC
error when adding new files to a directory. See #7401 for full
details.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #7401
Cloes #7416
When using 16MB blocks the send/recv queue's aren't quite big
enough. This change leaves the default 16M queue size which a
good value for most pools. But it additionally ensures that the
queue sizes are at least twice the allowed zfs_max_recordsize.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7365Closes#7404
mdb doesn't have dmu_ot[], so we need a different mechanism for its
SNPRINTF_BLKPTR() to determine if the BP is encrypted vs authenticated.
Additionally, since it already relies on BP_IS_ENCRYPTED (etc),
SNPRINTF_BLKPTR might as well figure out the "crypt_type" on its own,
rather than making the caller do so.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#7390
vdev_count_leaves() in the denominator may return 0, caught by Coverity.
Introduced by
* 533ea04 Update mmp_delay on sync or skipped, failed write
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7391
When an MMP write is skipped, or fails, and time since
mts->mmp_last_write is already greater than mts->mmp_delay, increase
mts->mmp_delay. The original code only updated mts->mmp_delay when a
write succeeded, but this results in the write(s) after delays and
failed write(s) reporting an ub_mmp_delay which is too low.
Update mmp_last_write and mmp_delay if a txg sync was successful. At
least one uberblock was written, thus extending the time we can be sure
the pool will not be imported by another host.
Do not allow mmp_delay to go below (MSEC2NSEC(zfs_multihost_interval) /
vdev_count_leaves()) so that a period of frequent successful MMP writes,
e.g. due to frequent txg syncs, does not result in an import activity
check so short it is not reliable based on mmp thread writes alone.
Remove unnecessary local variable, start. We do not use the start time
of the loop iteration.
Add a debug message in spa_activity_check() to allow verification of the
import_delay value and to prove the activity check occurred.
Alter the tests that import pools and attempt to detect an activity
check. Calculate the expected duration of spa_activity_check() based on
module parameters at the time the import is performed, rather than a
fixed time set in mmp.cfg. The fixed time may be wrong. Also, use the
default zfs_multihost_interval value so the activity check is longer and
easier to recognize.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7330
Fix a bunch of (mostly) sprintf/snprintf truncation compiler
warnings that show up on Fedora 28 (GCC 8.0.1).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7361Closes#7368
zfs_ioc_pool_scan leaks a spa reference when zc->zc_flags is not a
valid pool_scrub_cmd_t: this could happen if the userland binaries
and ZFS kernel module differ in version and would prevent the pool from
being exported.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7380
The ASSERT was erroneously copied from the next section of code.
The buffer's size should be expanded from "psize" to "asize"
if necessary.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#7375
Currently, the decryption and block authentication code in
the ZIO / ARC layers is a bit inconsistent with regards to
the ereports that are produces and the error codes that are
passed to calling functions. This patch ensures that all of
these errors (which begin as ECKSUM) are converted to EIO
before they leave the ZIO or ARC layer and that ereports
are correctly generated on each decryption / authentication
failure.
In addition, this patch fixes a bug in zio_decrypt() where
ECKSUM never gets written to zio->io_error.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7372
Encrypted dnode blocks are always initially read as raw data and
converted to decrypted data when an encrypted bonus buffer is
needed. This allows the DMU to be used for things like fetching
the DMU master node without requiring keys to be loaded. However,
dbuf_issue_final_prefetch() does not currently read the data as
raw. The end result of this is that prefetched dnode blocks are
read twice from disk: once decrypted and then again as raw data.
This patch corrects the issue by adding the flag when appropriate.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7362
During a receive operation zvol_create_minors_impl() can wait
needlessly for the prefetch thread because both share the same tasks
queue. This results in hung tasks:
<3>INFO: task z_zvol:5541 blocked for more than 120 seconds.
<3> Tainted: P O 3.16.0-4-amd64
<3>"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
The first z_zvol:5541 (zvol_task_cb) is waiting for the long running
traverse_prefetch_thread:260
root@linux:~# cat /proc/spl/taskq
taskq act nthr spwn maxt pri mina
spl_system_taskq/0 1 2 0 64 100 1
active: [260]traverse_prefetch_thread [zfs](0xffff88003347ae40)
wait: 5541
spl_delay_taskq/0 0 1 0 4 100 1
delay: spa_deadman [zfs](0xffff880039924000)
z_zvol/1 1 1 0 1 120 1
active: [5541]zvol_task_cb [zfs](0xffff88001fde6400)
pend: zvol_task_cb [zfs](0xffff88001fde6800)
This change adds a dedicated, per-pool, prefetch taskq to prevent the
traverse code from monopolizing the global (and limited) system_taskq by
inappropriately scheduling long running tasks on it.
Reviewed-by: Albert Lee <trisk@forkgnu.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6330Closes#6890Closes#7343
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
* Re-enabled and tweaked the zpool_upgrade_007_pos test case
to successfully run in under 5 minutes.
OpenZFS-issue: https://www.illumos.org/issues/9164
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0e776dc06aCloses#6112Closes#7336
Currently, when ZFS wants to accelerate compression with QAT, it
passes a destination buffer of the same size as the source buffer.
Unfortunately, if the data is incompressible, QAT can actually
"compress" the data to be larger than the source buffer. When this
happens, the QAT driver will return a FAILED error code and print
warnings to dmesg. This patch fixes these issues by providing the
QAT driver with an additional buffer to work with so that even
completely incompressible source data will not cause an overflow.
This patch also resolves an error handling issue where
incompressible data attempts compression twice: once by QAT and
once in software. To fix this issue, a new (and fake) error code
CPA_STATUS_INOMPRESSIBLE has been added so that the calling code
can correctly account for the difference between a hardware
failure and data that simply cannot be compressed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7338
This patch fixes an issue where dsl_scan_prefetch_cb() might
add more prefetch I/Os to the prefetch queue after prefetching
has been completed. This was happening because that code was
checking scn->scn_suspending instead of scn->scn_prefetch_stop.
This occasionally triggered an ASSERT during ztest runs in
dsl_scan_fini() when the code attempted to destroy an AVL tree
that still had entires in it. This patch also includes a number
of spelling corrections and comment cleanups throughout
dsl_scan.c
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7353
Calling uiomove() in mappedread() under the page lock can result
in a deadlock if the user space page needs to be faulted in.
Resolve the issue by dropping the page lock before the uiomove().
The inode range lock protects against concurrent updates via
zfs_read() and zfs_write().
Reviewed-by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7335Closes#7339
Authored by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9321
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/92b05f3a18Closes#7333
Currently, ZFS tracks statistics about calls to arc_read()
via the /proc/spl/kstat/zfs/<pool>/reads file for debugging.
Unfortunately, this file currently counts embedded bps as
disk reads since they are technically processed by the ZIO
layer. This pollutes the log since the ARC will never cache
embedded bps. This patch corrects this issue by preventing
the logging of embedded bp reads.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7334
zfs_dbgmsg() should record a message by default. As a general
principal, these messages shouldn't be too verbose. Furthermore, the
amount of memory used is limited to 4MB (by default).
dprintf() should only record a message if this is a debug build, and
ZFS_DEBUG_DPRINTF is set in zfs_flags. This flag is not set by default
(even on debug builds). These messages are extremely verbose, and
sometimes nontrivial to compute.
SET_ERROR() should only record a message if ZFS_DEBUG_SET_ERROR is set
in zfs_flags. This flag is not set by default (even on debug builds).
This brings our behavior in line with illumos. Note that the message
format is unchanged (including file, line, and function, even though
these are not recorded on illumos).
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#7314
This patch simply corrects some spelling / grammar errors in
the QAT and encryption code comments. No functional changes
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7319
In vdev_queue_aggregate() the zio_execute() bypass should not be
called under the vdev queue lock. This can result in a deadlock
as shown in the stack traces below.
Drop the vdev queue lock then walk the parents of the aggregate IO
to determine the list of component IOs to be bypassed. This can
be done safely without holding the io_lock since the new aggregate
IO has not yet been returned and its parents cannot change.
--- THREAD 1 ---
arc_read()
zio_nowait()
zio_vdev_io_start()
vdev_queue_io() <--- mutex_enter(vq->vq_lock)
vdev_queue_io_to_issue()
vdev_queue_aggregate()
zio_execute()
zio_vdev_io_assess()
zio_wait_for_children() <- mutex_enter(zio->io_lock)
--- THREAD 2 --- (inverse order)
arc_read()
zio_change_priority() <- mutex_enter(zio->zio_lock)
vdev_queue_change_io_priority() <- mutex_enter(vq->vq_lock)
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7307
This patch adds some handling to the QAT acceleration functions
that allows them to handle buffers that are not aligned with the
page cache. At the moment this never happens since callers only
happen to work with page-aligned buffers, but this code should
prevent headaches if this isn't always true in the future. This
patch also adds some cleanups to align the QAT compression code
with the encryption and checksumming code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7305
When the pool is suspended, record whether it was due to an I/O error or
due to MMP writes failing to succeed within the required time.
Change spa_suspended from uint8_t to zio_suspend_reason_t to store the
reason.
When userspace queries pool status via spa_tryimport(), report the
reason the pool was suspended in a new key,
ZPOOL_CONFIG_SUSPENDED_REASON.
In libzfs, when interpreting the returned config nvlist, report
suspension due to MMP with a new pool status enum value,
ZPOOL_STATUS_IO_FAILURE_MMP.
In status_callback(), which generates and emits the message when 'zpool
status' is executed, add a case to print an appropriate message for the
new pool status enum value.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7296
This patch enables acceleration of SHA256 checksums using Intel
Quick Assist Technology. This patch also fixes up and refactors
some of the code from QAT encryption to make the behavior
consistent.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chengfeix Zhu <chengfeix.zhu@intel.com>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7295
In zfs receive, the function receive_spill should account
for spill block endian conversion as a defensive measure.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#7300
With compressed ARC (bug 6950) we use up to 25% of our CPU to decompress
indirect blocks, under a workload of random cached reads. To reduce this
decompression cost, we would like to increase the size of the dbuf cache so
that more indirect blocks can be stored uncompressed.
If we are caching entire large files of recordsize=8K, the indirect blocks
use 1/64th as much memory as the data blocks (assuming they have the same
compression ratio). We suggest making the dbuf cache be 1/32nd of all memory,
so that in this scenario we should be able to keep all the indirect blocks
decompressed in the dbuf cache. (We want it to be more than the 1/64th that
the indirect blocks would use because we need to cache other stuff in the dbuf
cache as well.)
In real world workloads, this won't help as dramatically as the example above,
but we think it's still worth it because the risk of decreasing performance is
low. The potential negative performance impact is that we will be slightly
reducing the size of the ARC (by ~3%).
Porting Notes:
* Added modules options to zfs-module-parameters.5 man page.
* Preserved scaling based on target ARC size rather than max ARC size.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9188
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/564
Upstream bug: DLPX-46942
Closes#7273
Historically a dynamic misc minor number was registered for the
/dev/zfs device in order to prevent minor number collisions. This
was fine but it prevented us from being able to use the kernel
module auto-loaded which requires a known reserved value.
Resolve this issue by adding a configure test to find an available
misc minor number which can then be used in MODULE_ALIAS_MISCDEV at
build time. By adding this alias the zfs kmod is added to the list
of known static-nodes and the systemd-tmpfiles-setup-dev service
will create a /dev/zfs character device at boot time.
This in turn allows us to update the 90-zfs.rules file to make it
aware this is a static node. The upshot of this is that whenever
a process (zpool, zfs, zed) opens the /dev/zfs the kmods will be
automatic loaded. This even works for unprivileged users so there
is no longer a need to manually load the modules at boot time.
As an additional bonus the zed now no longer needs to start after
the zfs-import.service since it will trigger the module load.
In the unlikely event the minor number we selected conflicts with
another out of tree unregistered minor number the code falls back
to dynamically allocating it. In this case the modules again
must be manually loaded.
Note that due to the change in the method of registering the minor
number the zimport.sh test case may incorrectly fail when the
static node for the installed packages is created instead of the
dynamic one. This issue will only transiently impact zimport.sh
for this single commit when we transition and are mixing and
matching methods.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes#7287
When it's set, a DTL range will be cleared even if its scan/scrub had
errors. This allows to work around resilver/scrub upon import when the
pool has errors.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#7293
We hit an illegal memory access in the zrlock trace point. The problem
is that zrl->zr_owner and zrl->zr_caller are assigned locklessly. And if
zrl->zr_owner got assigned a longer string between when __string()
calculate the strlen, and when __assign_str() does strcpy. The copy will
overflow the buffer.
==
For example:
Initial condition:
zrl->zr_owner = A
zrl->zr_caller = "abc"
Thread A Thread B
-------------------------------------------------
if (zrl->zr_owner == A) {
DTRACE_PROBE2() {
__string() {
strlen(zrl->zr_caller) -> 3
allocate buf[4]
}
zrl->zr_owner = B
zrl->zr_caller = "abcd"
__assign_str() {
strcpy(buf, zrl->zr_caller) <- buffer overflow
==
Dereferencing zrl->zr_owner->pid may also be problematic, in that the
zrl->zr_owner got changed to other task, and that task exits, freeing
the task_struct. This should be very unlikely, as the other task need to
zrl_remove and exit between the dereferencing zr->zr_owner and
zr->zr_owner->pid. Nevertheless, we'll deal with it as well.
To fix the zrl->zr_caller issue, instead of copy the string content, we
just copy the pointer, this is safe because it always points to
__func__, which is static. As for the zrl->zr_owner issue, we pass in
curthread instead of using zrl->zr_owner.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#7291
When a single pool contains more vdevs than the CONFIG_HZ for
for the kernel the mmp thread will not delay properly. Switch
to using cv_timedwait_sig_hires() to handle higher resolution
delays.
This issue was reported on Arch Linux where HZ defaults to only
100 and this could be fairly easily reproduced with a reasonably
large pool. Most distribution kernels set CONFIG_HZ=250 or
CONFIG_HZ=1000 and thus are unlikely to be impacted.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7205Closes#7289
A config lock should be held while vdev_count_leaves() walks the tree,
otherwise the pointers reference may become invalid during the walk.
SCL_VDEV is a minimal lock provided for such uses cases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7286
When multihost is disabled on a pool, and the pool is resumed via zpool
clear, within a single cycle of the mmp thread's loop (e.g. while it's
in the cv_timedwait call), both mmp_last_write and mmp_delay should be
updated.
The original code mistakenly treated the two cases as if they could not
occur at the same time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7286
This patch adds support for acceleration of AES-GCM encryption
with Intel Quick Assist Technology.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chengfeix Zhu <chengfeix.zhu@intel.com>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7282
Change file related checks to use user namespaces and make
sure involved uids/gids are mappable in the current
namespace.
Note that checks without file ownership information will
still not take user namespaces into account, as some of
these should be handled via 'zfs allow' (otherwise root in a
user namespace could issue commands such as `zpool export`).
This also adds an initial user namespace regression test
for the setgid bit loss, with a user_ns_exec helper usable
in further tests.
Additionally, configure checks for the required user
namespace related features are added for:
* ns_capable
* kuid/kgid_has_mapping()
* user_ns in cred_t
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Closes#6800Closes#7270
Once per pass through the MMP thread's loop, the vdev tree is walked to
find a suitable leaf to write the next MMP block to. If no such leaf is
found, the thread sleeps for a while and resumes at the top of the loop.
Add an entry to multihost_history when no leaf can be found, and record
the reason in the error column. The error code for such entries is a
bitfield, displayed in hex:
0x1 At least one vdev (interior or leaf) was not writeable.
0x2 At least one writeable leaf vdev was found, but it had a pending
MMP write.
timestamp = the time in seconds since the epoch when no leaf could be
found originally.
duration = the time (in ns) during which no MMP block was written for
this reason. This does not include the preceeding inter-write period
nor the following inter-write period.
vdev_guid = the number of sequential cycles of the MMP thread looop when
this occurred.
Sample output, truncated to fit:
For records of skipped MMP writes the right-most column, vdev_path, is
reported as "-".
id txg timestamp error duration mmp_delay vdev_guid ...
936 11 1520036441 0 146264 891422313 1740883117838 ...
937 11 1520036441 0 163956 888356657 7320395061548 ...
938 11 1520036442 0 130690 885314969 7320395061548 ...
939 11 1520036442 0 2001068577 882296582 1740883117838 ...
940 11 1520036443 0 161806 882296582 7320395061548 ...
941 11 1520036443 0x2 0 998020546 1 ...
942 11 1520036444 0 136585 998020546 7320395061548 ...
943 11 1520036444 0x2 0 998020257 1 ...
944 11 1520036445 5 2002662964 994160219 1740883117838 ...
945 11 1520036445 0x2 998073118 994160219 3 ...
946 11 1520036447 0 247136 994160219 7320395061548 ...
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7212
If something holds the config lock as a writer for too long, MMP will
fail to issue MMP writes in a timely manner. This will result either in
the pool being suspended, or in an extreme case, in the pool not being
protected.
If the time to acquire the config lock exceeds 1/10 of the minimum
zfs_multihost_interval, report it in the zfs debug log.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7212
1) The Coverity Scan reports some issues for the project
quota patch, including:
1.1) zfs_prop_get_userquota() directly uses the const quota
type value as the condition check by wrong.
1.2) dmu_objset_userquota_get_ids() may cause dnode::dn_newgid
to be overwritten by dnode::dn->dn_oldprojid.
2) This patch fixes related issues. It also enhances the logic
for zfs_project_item_alloc() to avoid buffer overflow.
3) Skip project quota ability check if does not change project
quota related things (id or flag). Otherwise, it will cause
chattr (for other non project quota flags) operation failed
if project quota disabled.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
Closes#7251Closes#7265
As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk()
is now get_disk_and_module(). Add a configure check to determine
if we need to use get_disk_and_module().
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#7264
Change checksum & IO delay ratelimit thresholds from 5/sec to 20/sec.
This allows zed to actually trigger if a bunch of these events arrive in
a short period of time (zed has a threshold of 10 events in 10 sec).
Previously, if you had, say, 100 checksum errors in 1 sec, it would get
ratelimited to 5/sec which wouldn't trigger zed to fault the drive.
Also, convert the checksum and IO delay thresholds to module params for
easy testing.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7252
In zil_lwb_commit() with TX_WRITE, we copy the log write record (lrw)
into the log write block (lwb) and send it off using zil_lwb_add_txg().
If we also have WR_NEED_COPY, we additionally copy the lwr's data into
the lwb to be sent off. If the lwr + data doesn't fit into the lwb, we
send the lrw and as much data as will fit (dnow bytes), then go back
and do the same with the remaining data.
Each time through this loop we're sending dnow data bytes. I.e.
zil_itx_needcopy_bytes should be incremented by dnow.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#6988Closes#7176
b1d21733 made it possible for empty metadnode blocks to be
compressed to a hole, fixing a bug that would cause invalid
metadnode MACs when a send stream attempted to free objects
and allowing the blocks to be reclaimed when they were no
longer needed. However, this patch also introduced a race
condition; if a txg sync occurred after a DRR_OBJECT_RANGE
record was received but before any objects were added, the
metadnode block would be compressed to a hole and lose all
of its encryption parameters. This would cause subsequent
DRR_OBJECT records to fail when they attempted to write
their data into an unencrypted block. This patch defers the
DRR_OBJECT_RANGE handling to receive_object() so that the
encryption parameters are set with each object that is
written into that block.
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7215Closes#7236
This patch contains no functional changes. It is solely intended
to resolve cstyle warnings in order to facilitate moving the spl
source code in to the zfs repository.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#687
Provide infrastructure to auto-configure to enum and API changes in the
global page stats used for our free memory calculations.
arc_free_memory has been broken since an API change in Linux v3.14:
2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node
2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node
vmstats
These commits moved some of global_page_state() into
global_node_page_state(). The API change was particularly egregious as,
instead of breaking the old code, it silently did the wrong thing and we
continued using global_page_state() where we should have been using
global_node_page_state(), thus indexing into the wrong array via
NR_SLAB_RECLAIMABLE et al.
There have been further API changes along the way:
2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to
node counters
2017-09-06 v4.14 c41f012a mm: rename global_page_state to
global_zone_page_state
...and various (incomplete, as it turns out) attempts to accomodate
these changes in ZoL:
2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats
2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc
2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc
The config infrastructure provided here resolves these issues going back
to the original API change in v3.14 and is robust against further Linux
changes in this area.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#7170
While the pool is suspended on host A, it may be imported on host B.
If host A continued to write MMP blocks, it would be blindly
overwriting MMP blocks written by host B, and the blocks written by
host A would have outdated txg information.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#7182
The current bounds check in zio_crypt_do_objset_hmacs() does not
properly handle the possible sizes of the objset_phys_t and
can therefore read outside the buffer's memory. If that memory
happened to match what the check was actually looking for, the
objset would fail to be owned, complaining that the MAC was
invalid.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7210
vn_init() and vn_fini() had been renamed by 12ff95ff in 2011.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#686
This is only used via ->ks_update of `kstat_t *`.
This isn't exported nor do headers have its prototype.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#686
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/9035
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/46ac8fdfc5Closes#7206
Currently, raw zfs sends transfer the encrypted master keys and
objset_phys_t encryption parameters in the DRR_BEGIN payload of
each send file. Both of these are processed as soon as they are
read in dmu_recv_stream(), meaning that the new keys are set
before the new snapshot is received. In addition to the fact that
this changes the user's keys for the dataset earlier than they
might expect, the keys were never reset to what they originally
were in the event that the receive failed. This patch splits the
processing into objset handling and key handling, the later of
which is moved to dmu_recv_end() so that they key change can be
done atomically.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7200
The current design of ZFS encryption only allows a dataset to
have one DSL Crypto Key at a time. As a result, it is important
that the zfs receive code ensures that only one key can be in use
at a time for a given DSL Directory. zfs receive -F complicates
this, since the new dataset is received as a clone of the existing
one so that an atomic switch can be done at the end. To prevent
confusion about which dataset is actually encrypted a check was
added to ensure that encrypted datasets cannot use zfs recv -F to
completely replace existing datasets. Unfortunately, the check did
not take into account unencrypted datasets being overriden by
encrypted ones as a case.
Along the same lines, the code also failed to ensure that raw
recieves could not be done on top of existing unencrypted
datasets, which causes amny problems since the new stream cannot
be decrypted.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7199
Currently, the DMU relies on ZIO layer compression to free LO
dnode blocks that no longer have objects in them. However,
raw receives disable all compression, meaning that these blocks
can never be freed. In addition to the obvious space concerns,
this could also cause incremental raw receives to fail to mount
since the MAC of a hole is different from that of a completely
zeroed block.
This patch corrects this issue by adding a special case in
zio_write_compress() which will attempt to compress these blocks
to a hole even if ZIO_FLAG_RAW_ENCRYPT is set. This patch also
removes the zfs_mdcomp_disable tunable, since tuning it could
cause these same issues.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7198
1b66810b introduced serveral changes which improved the reliability
of zfs sends when large dnodes were involved. However, these fixes
required adding a few calls to txg_wait_synced() in the DRR_OBJECT
handling code. Although most of them are currently necessary, this
patch allows the code to continue without waiting in some cases
where it doesn't have to.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7197
This one line patch adds adds a set to os->os_next_write_raw
that was omitted when the code was updated in 1b66810. Without
it, the code (in some instances) could attempt to write raw
encrypted data as regular unencrypted data without the keys
being loaded, triggering an ASSERT in zio_encrypt().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7196
Currently, ZIL claiming dirties objsets which causes
dsl_pool_sync() to attempt to perform user accounting on
them. This causes problems for encrypted datasets that were
raw received before the system went offline since they
cannot perform user accounting until they have their keys
loaded. This triggers an ASSERT in zio_encrypt(). Since
encryption was added, the code now depends on the fact that
data should only be written when objsets are owned. This
patch adds a check in dmu_objset_do_userquota_updates()
to ensure that useraccounting is only done when the objsets
are actually owned for write. As part of this work, the
zfsvfs and zvol code was updated so that it no longer lies
about owning objsets readonly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6916Closes#7163
CID 173243, 173245: Memory - corruptions (OVERRUN)
Added size argument to lcompat_sprintf() to avoid use of INT_MAX
CID 173244: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
Added cast to uint64_t to avoid a 32 bit overflow warning
CID 173242: Integer handling issues (CONSTANT_EXPRESSION_RESULT)
Conditionally removed unused luai_numisnan() floating point check
CID 173241: Resource leaks (RESOURCE_LEAK)
Added missing close(fd) on error path
CID 173240: (UNINIT)
Fixed uninitialized variable in get_special_prop()
CID 147560: Null pointer dereferences (NULL_RETURNS)
Cleaned up bad code merge in dsl_dataset_promote_check()
CID 28475: Memory - illegal accesses (OVERRUN)
Fixed lcompat_sprintf() to use a size paramater
CID 28418, 28422: Error handling issues (CHECKED_RETURN)
Added function result cast to (void) to avoid warning
CID 23935, 28411, 28412: Memory - corruptions (ARRAY_VS_SINGLETON)
Added casts to avoid exposing result as an array
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7181
This patch corrects a small security issue with 9c5167d1. When the
project dnode was added to the objset_phys_t, it was not included
in the local MAC for cryptographic protection, allowing an attacker
to modify this data without the consent of the key holder. This
patch does represent an on-disk format change for anyone using
project dnodes on an encrypted dataset.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7177
The use of void __attribute__((noreturn)) in kernel builds
was causing lots of warnings if CONFIG_STACK_VALIDATION
is active. For now we just remove this attribute to achieve
clean builds for the Lua module. There was no significant
increase in the time to run the full channel_program ZTS tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#7173
PROBLEM
=======
It's possible for a parent zio to complete even though it has children
which have not completed. This can result in the following panic:
> $C
ffffff01809128c0 vpanic()
ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80)
ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80)
ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0,
ffffff3373370908)
ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0)
ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0)
ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140)
ffffff0180912b40 thread_start+8()
> ::status
debugging crash dump vmcore.2 (64-bit) from batfs0390
operating system: 5.11 joyent_20170911T171900Z (i86pc)
image uuid: (not set)
panic message: mutex_enter: bad mutex, lp=ffffff597dde7f80
owner=ffffff3c59b39480 thread=ffffff0180912c40
dump content: kernel pages only
The problem is that dbuf_prefetch along with l2arc can create a zio tree
which confuses the parent zio and allows it to complete with while children
still exist. Here's the scenario:
zio tree:
pio
|--- lio
The parent zio, pio, has entered the zio_done stage and begins to check its
children to see there are still some that have not completed. In zio_done(),
the children are checked in the following order:
zio_wait_for_children(zio, ZIO_CHILD_VDEV, ZIO_WAIT_DONE)
zio_wait_for_children(zio, ZIO_CHILD_GANG, ZIO_WAIT_DONE)
zio_wait_for_children(zio, ZIO_CHILD_DDT, ZIO_WAIT_DONE)
zio_wait_for_children(zio, ZIO_CHILD_LOGICAL, ZIO_WAIT_DONE)
If pio, finds any child which has not completed then it stops executing and
goes to sleep. Each call to zio_wait_for_children() will grab the io_lock
while checking the particular child.
In this scenario, the pio has completed the first call to
zio_wait_for_children() to check for any ZIO_CHILD_VDEV children. Since
the only zio in the zio tree right now is the logical zio, lio, then it
completes that call and prepares to check the next child type.
In the meantime, the lio completes and in its callback creates a child vdev
zio, cio. The zio tree looks like this:
zio tree:
pio
|--- lio
|--- cio
The lio then grabs the parent's io_lock and removes itself.
zio tree:
pio
|--- cio
The pio continues to run but has already completed its check for ZIO_CHILD_VDEV
and will erroneously complete. When the child zio, cio, completes it will panic
the system trying to reference the parent zio which has been destroyed.
SOLUTION
========
The fix is to rework the zio_wait_for_children() logic to accept a bitfield
for all the children types that it's interested in checking. The
io_lock will is held the entire time we check all the children types. Since
the function now accepts a bitfield, a simple ZIO_CHILD_BIT() macro is provided
to allow for the conversion between a ZIO_CHILD type and the bitfield used by
the zio_wiat_for_children logic.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Youzhong Yang <youzhong@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8857
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/862ff6d99c
Issue #5918Closes#7168
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.
Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').
By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.
Support the following commands and functionalities:
zfs set projectquota@project
zfs set projectobjquota@project
zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project
zfs projectspace
zfs allow projectquota
zfs allow projectobjquota
zfs allow projectused
zfs allow projectobjused
zfs unallow projectquota
zfs unallow projectobjquota
zfs unallow projectused
zfs unallow projectobjused
chattr +/-P
chattr -p project_id
lsattr -p
This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>
For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by Ned Bass <bass6@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes#6290
mmp_write_uberblock() and mmp_write_done() should the same tag
for spa_config_locks.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Closes#6530Closes#7155
8520 lzc_rollback_to should support rolling back to origin
7198 libzfs should gracefully handle EINVAL from lzc_rollback
lzc_rollback_to() should support rolling back to a clone's origin.
The current checks in zfs_ioc_rollback() would not allow that
because the origin snapshot belongs to a different filesystem.
The overly restrictive check was in introduced in 7600, but it
was not a regression as none of the existing tools provided a
way to rollback to the origin.
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8520
OpenZFS-issue: https://www.illumos.org/issues/7198
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/78a5a1a25aCloses#7150
With "casesensitivity=mixed", zap_add() could fail when the number of
files/directories with the same name (varying in case) exceed the
capacity of the leaf node of a Fatzap. This results in a ASSERT()
failure as zfs_link_create() does not expect zap_add() to fail. The fix
is to handle these failures and rollback the transactions.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Closes#7011Closes#7054
If a corruption happens to be on a root block of an objset, zdb -c will
not correctly report the error, and it will not traverse the datasets
that come after. This is because traverse_visitbp, which does the
callback and reset error for TRAVERSE_HARD, is skipped when traversing
zil is failed in traverse_impl.
Here's example of what 'zdb -eLcc' command looks like on a pool with
damaged objset root:
== before patch:
Traversing all blocks to verify checksums ...
Error counts:
errno count
block traversal size 379392 != alloc 33987072 (unreachable 33607680)
bp count: 172
ganged count: 0
bp logical: 1678336 avg: 9757
bp physical: 130560 avg: 759 compression: 12.85
bp allocated: 379392 avg: 2205 compression: 4.42
bp deduped: 0 ref>1: 0 deduplication: 1.00
SPA allocated: 33987072 used: 0.80%
additional, non-pointer bps of type 0: 71
Dittoed blocks on same vdev: 101
== after patch:
Traversing all blocks to verify checksums ...
zdb_blkptr_cb: Got error 52 reading <54, 0, -1, 0> -- skipping
Error counts:
errno count
52 1
block traversal size 33963520 != alloc 33987072 (unreachable 23552)
bp count: 447
ganged count: 0
bp logical: 36093440 avg: 80745
bp physical: 33699840 avg: 75391 compression: 1.07
bp allocated: 33963520 avg: 75981 compression: 1.06
bp deduped: 0 ref>1: 0 deduplication: 1.00
SPA allocated: 33987072 used: 0.80%
additional, non-pointer bps of type 0: 76
Dittoed blocks on same vdev: 115
==
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#7099
A new interface was added to manipulate the version field of an
inode. Add a inode_set_iversion() wrapper for older kernels and
use the new interface when available.
The i_version field was dropped from the trace point due to the
switch to an atomic64_t i_version type.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7148
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>
We want to be able to run channel programs outside of synching
context. This would greatly improve performance for channel programs
that just gather information, as they won't have to wait for synching
context anymore.
=== What is implemented?
This feature introduces the following:
- A new command line flag in "zfs program" to specify our intention
to run in open context. (The -n option)
- A new flag/option within the channel program ioctl which selects
the context.
- Appropriate error handling whenever we try a channel program in
open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.
=== How do we handle zfs.sync functions in open context?
When such a function is found by the interpreter and we are running
in open context we abort the script and we spit out a descriptive
runtime error. For example, given the script below ...
arg = ...
fs = arg["argv"][1]
err = zfs.sync.destroy(fs)
msg = "destroying " .. fs .. " err=" .. err
return msg
if we run it in open context, we will get back the following error:
Channel program execution failed:
[string "channel program"]:3: running functions from the zfs.sync
submodule requires passing sync=TRUE to lzc_channel_program()
(i.e. do not specify the "-n" command line argument)
stack traceback:
[C]: in function 'destroy'
[string "channel program"]:3: in main chunk
=== What about testing?
We've introduced new wrappers for all channel program tests that
run each channel program as both (startard & open-context) and
expect the appropriate behavior depending on the program using
the zfs.sync module.
OpenZFS-issue: https://www.illumos.org/issues/8677
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15Closes#6558
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>
Every time we want to unmount a snapshot (happens during snapshot
deletion or renaming) we unnecessarily iterate through all the
mountpoints in the VFS layer (see zfs_get_vfs).
The current patch completely gets rid of that code and changes
the approach while keeping the behavior of that code path the
same. Specifically, it puts a hold on the dataset/snapshot and
gets its vfs resource reference directly, instead of linearly
searching for it. If that reference exists we attempt to amount
it.
With the above change, it became obvious that the nvlist
manipulations that we do (add_boolean and add_nvlist) take a
significant amount of time ensuring uniqueness of every new
element even though they don't have too. Thus, we updated the
patch so those nvlists are not trying to enforce the uniqueness
of their elements.
A more complete analysis of the problem solved by this patch
can be found below:
https://sdimitro.github.io/post/snap-unmount-perf/
OpenZFS-issue: https://www.illumos.org/issues/8604
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/126118fb
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>
ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this entails extra
logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.
OpenZFS-issue: https://www.illumos.org/issues/8600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68089b8b
Authored by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>
ZFS channel programs should be able to perform a rollback.
OpenZFS-issue: https://www.illumos.org/issues/8592
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d46b5ed6
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>
zfs.exists() in channel programs doesn't return any result, and should
have a man page entry. This patch corrects zfs.exists so that it
returns a value indicating if the dataset exists or not. It also adds
documentation about it in the man page.
OpenZFS-issue: https://www.illumos.org/issues/8605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1e85e111
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533
Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
zfs_arc_p_aggressive_disable is no more. This PR removes docs
and module parameters for zfs_arc_p_aggressive_disable.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Richard Elling <Richard.Elling@RichardElling.com>
Closes#7135
This patch contains no functional changes. It is solely intended
to resolve cstyle warnings in order to facilitate moving the spl
source code in to the zfs repository.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#681
Currently, the ARC exposes 2 tunables (zfs_arc_min_prefetch_ms
and zfs_arc_min_prescient_prefetch_ms) which are documented
to be specified in milliseconds. However, the code actually
uses the values as though they were in seconds. This patch
adjusts the code to match the names and documentation of the
tunables.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7126
Remove the unused vmalloc address check, and function mem_to_page
will handle the non-vmalloc address when map it to a physical
address.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#7125
The keystore.sk_dk_lock should not be held while performing I/O.
Drop the lock when reading from disk and update the code so
they the first successful caller adds the key.
Improve error handling in spa_keystore_create_mapping_impl().
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: RageLtMan <rageltman@sempervictus>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7112Closes#7115
Currently, os_next_write_raw is a single boolean used for determining
whether or not the next call to dmu_objset_sync() should write out
the objset_phys_t as a raw buffer. Since the boolean is not associated
with a txg, the work simply happens during the next txg, which is not
necessarily the correct one. In the current implementation this issue
was misdiagnosed, resulting in a small hack in dmu_objset_sync() which
seemed to resolve the problem.
This patch changes os_next_write_raw to be an array of booleans, one
for each txg in TXG_OFF and removes the hack.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6864
Currently, when a raw zfs send file includes a DRR_OBJECT record
that would decrease the number of levels of an existing object,
the object is reallocated with dmu_object_reclaim() which
creates the new dnode using the old object's nlevels. For non-raw
sends this doesn't really matter, but raw sends require that
nlevels on the receive side match that of the send side so that
the checksum-of-MAC tree can be properly maintained. This patch
corrects the issue by freeing the object completely before
allocating it again in this case.
This patch also corrects several issues with dnode_hold_impl()
and related functions that prevented dnodes (particularly
multi-slot dnodes) from being reallocated properly due to
the fact that existing dnodes were not being fully cleaned up
when they were freed.
This patch adds a test to make sure that zfs recv functions
properly with incremental streams containing dnodes of different
sizes.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6821Closes#6864
When performing zil_claim() at pool import time, it is
important that encrypted datasets set os_next_write_raw
before writing to the zil_header_t. This prevents the code
from attempting to re-authenticate the objset_phys_t when
it writes it out, which is unnecessary because the
zil_header_t is not protected by either objset MAC and
impossible since the keys aren't loaded yet. Unfortunately,
one of the code paths did not set this flag, which causes
failed ASSERTs during 'zpool import -F'. This patch corrects
this issue.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6864Closes#6916
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.
Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.
This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.
This patch also contains minor bug fixes and cleanups.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6845Closes#6864Closes#7052
Currently, the ICP contains accelerated assembly code to be
used specifically on CPUs with AES-NI enabled. This code
makes heavy use of the movaps instruction which assumes that
it will be provided aes keys that are 16 byte aligned. This
assumption seems to hold on Illumos, but on Linux some kernel
options such as 'slub_debug=P' will violate it. This patch
changes all instances of this instruction to movups which is
the same except that it can handle unaligned memory.
This patch also adds a few flags which were accidentally never
given to the assembly compiler, resulting in objtool warnings.
Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Nathaniel R. Lewis <linux.robotdude@gmail.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#7065Closes#7108
When scn->scn_maxinflight_bytes has not been initialized it's
possible to hang on the condition variable in scan_exec_io().
This issue was uncovered by ztest and is only possible when
deduplication is enabled through the following call path.
txg_sync_thread()
spa_sync()
ddt_sync_table()
ddt_sync_entry()
dsl_scan_ddt_entry()
dsl_scan_scrub_cb()
dsl_scan_enqueuei()
scan_exec_io()
cv_wait()
Resolve the issue by always initializing scn_maxinflight_bytes
to a reasonable minimum value. This value will be recalculated
in dsl_scan_sync() to pick up changes to zfs_scan_vdev_limit
and the addition/removal of vdevs.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7098
* Remove 'zfs snap' from zfs help message (OpenZFS sync)
* Update zfs(8) to suggest 'snap' can be used as an alias for 'snapshot'
* Enforce 80 columns limit in help messages
* Remove zfs_disable_dup_eviction from zfs-module-parameters(5)
* Expose zfs_scan_max_ext_gap as a kernel module parameter.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7087
Introduce kstats about the dbuf hash and dbuf cache
to make it easier to inspect state. This should help
with debugging and understanding of these portions
of the codebase.
Correct format of dbuf kstat file.
Introduce a dbc column to dbufs kstat to indicate if
a dbuf is in the dbuf cache.
Introduce field filtering in the dbufstat python script.
Introduce a no header option to the dbufstat python script.
Introduce a test case to test basic mru->mfu list movement
in the ARC.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6906
PROBLEM
=======
When `dmu_tx_assign` is called from `zil_lwb_write_issue`, it's possible
for either `ERESTART` or `EIO` to be returned.
If `ERESTART` is returned, this will cause an assertion to fail directly
in `zil_lwb_write_issue`, where the code assumes the return value is
`EIO` if `dmu_tx_assign` returns a non-zero value. This can occur if the
SPA is suspended when `dmu_tx_assign` is called, and most often occurs
when running `zloop`.
If `EIO` is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, `zil_commit_waiter_timeout` contains the
following logic:
lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);
In this case, if `dmu_tx_assign` returned `EIO` from within
`zil_lwb_write_issue`, the `lwb` variable passed in will not be issued
to disk. Thus, it's `lwb_state` field will remain `LWB_STATE_OPENED` and
this assertion will fail. `zil_commit_waiter_timeout` assumes that after
it calls `zil_lwb_write_issue`, the `lwb` will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where `dmu_tx_assign` returns `EIO`.
SOLUTION
========
This change modifies the `dmu_tx_assign` function such that `txg_how` is
a bitmask, rather than of the `txg_how_t` enum type. Now, the previous
`TXG_WAITED` semantics can be used via `TXG_NOTHROTTLE`, along with
specifying either `TXG_NOWAIT` or `TXG_WAIT` semantics.
Previously, when `TXG_WAITED` was specified, `TXG_NOWAIT` semantics was
automatically invoked. This was not ideal when using `TXG_WAITED` within
`zil_lwb_write_issued`, leading the problem described above. Rather, we
want to achieve the semantics of `TXG_WAIT`, while also preventing the
`tx` from being penalized via the dirty delay throttling.
With this change, `zil_lwb_write_issued` can acheive the semtantics that
it requires by passing in the value `TXG_WAIT | TXG_NOTHROTTLE` to
`dmu_tx_assign`.
Further, consumers of `dmu_tx_assign` wishing to achieve the old
`TXG_WAITED` semantics can pass in the value `TXG_NOWAIT | TXG_NOTHROTTLE`.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Additionally updated `zfs_tmpfile` to use `TXG_NOTHROTTLE`
OpenZFS-issue: https://www.illumos.org/issues/8997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/19ea6cb0f9Closes#7084
The intent of this patch is extend the existing deadman code
such that it's flexible enough to be used by both ztest and
on production systems. The proposed changes include:
* Added a new `zfs_deadman_failmode` module option which is
used to dynamically control the behavior of the deadman. It's
loosely modeled after, but independant from, the pool failmode
property. It can be set to wait, continue, or panic.
* wait - Wait for the "hung" I/O (default)
* continue - Attempt to recover from a "hung" I/O
* panic - Panic the system
* Added a new `zfs_deadman_ziotime_ms` module option which is
analogous to `zfs_deadman_synctime_ms` except instead of
applying to a pool TXG sync it applies to zio_wait(). A
default value of 300s is used to define a "hung" zio.
* The ztest deadman thread has been re-enabled by default,
aligned with the upstream OpenZFS code, and then extended
to terminate the process when it takes significantly longer
to complete than expected.
* The -G option was added to ztest to print the internal debug
log when a fatal error is encountered. This same option was
previously added to zdb in commit fa603f82. Update zloop.sh
to unconditionally pass -G to obtain additional debugging.
* The FM_EREPORT_ZFS_DELAY event which was previously posted
when the deadman detect a "hung" pool has been replaced by
a new dedicated FM_EREPORT_ZFS_DEADMAN event.
* The proposed recovery logic attempts to restart a "hung"
zio by calling zio_interrupt() on any outstanding leaf zios.
We may want to further restrict this to zios in either the
ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages.
Calling zio_interrupt() is expected to only be useful for
cases when an IO has been submitted to the physical device
but for some reasonable the completion callback hasn't been
called by the lower layers. This shouldn't be possible but
has been observed and may be caused by kernel/driver bugs.
* The 'zfs_deadman_synctime_ms' default value was reduced from
1000s to 600s.
* Depending on how ztest fails there may be no cache file to
move. This should not be considered fatal, collect the logs
which are available and carry on.
* Add deadman test cases for spa_deadman() and zio_wait().
* Increase default zfs_deadman_checktime_ms to 60s.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6999
This reverts commit 093911f194.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#7079
Add missing helper function cv_timedwait_io(), it should be used
when waiting on IO with a specified timeout.
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#674
In case of misaligned I/O sequential requests are not detected as such
due to overlaps in logical block sequence:
dmu_zfetch(fffff80198dd0ae0, 27347, 9, 1)
dmu_zfetch(fffff80198dd0ae0, 27355, 9, 1)
dmu_zfetch(fffff80198dd0ae0, 27363, 9, 1)
dmu_zfetch(fffff80198dd0ae0, 27371, 9, 1)
dmu_zfetch(fffff80198dd0ae0, 27379, 9, 1)
dmu_zfetch(fffff80198dd0ae0, 27387, 9, 1)
This patch makes single block overlap to be counted as a stream hit,
improving performance up to several times.
Authored by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8835
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aab6dd482aCloses#7062
usr/src/uts/common/sys/fs/zfs.h
Change ZPROP_INVAL and ZPROP_CONT from macros to enum values. Clang
and GCC both prefer to use unsigned ints to store enums. That was
causing tautological comparison warnings (and likely eliminating
error handling code at compile time) whenever a zfs_prop_t or
zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT. Making the
error flags be explicity enum values forces the enum types to be
signed.
ZPROP_INVAL was also compared against two different enum types. I
had to change its name to ZPOOL_PROP_INVAL whenever its compared to
a zpool_prop_t. There are still some places where ZPROP_INVAL or
ZPROP_CONT is compared to a plain int, in code that doesn't know
whether the int is storing a zfs_prop_t or a zpool_prop_t.
usr/src/uts/common/fs/zfs/spa.c
s/ZPROP_INVAL/ZPOOL_PROP_INVAL/
Authored by: Alan Somers <asomers@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8652
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74Closes#7061
In mmp_thread(), emit an MMP specific error message before calling
zio_suspend() so that the administrator will understand why the pool
is being suspended.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Closes#7048
Authored by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
- Brought #defines in eventdefs.h in line with ZFS on Linux format.
- Updated zfs-events.5 with the new events.
OpenZFS-issue: https://www.illumos.org/issues/8959
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c862b93eeaCloses#7049
When --enable-asan is provided to configure then build all user
space components with fsanitize=address. For kernel support
use the Linux KASAN feature instead.
https://github.com/google/sanitizers/wiki/AddressSanitizer
When using gcc version 4.8 any test case which intentionally
generates a core dump will fail when using --enable-asan.
The default behavior is to disable core dumps and only newer
versions allow this behavior to be controled at run time with
the ASAN_OPTIONS environment variable.
Additionally, this patch includes some build system cleanup.
* Rules.am updated to set the minimum AM_CFLAGS, AM_CPPFLAGS,
and AM_LDFLAGS. Any additional flags should be added on a
per-Makefile basic. The --enable-debug and --enable-asan
options apply to all user space binaries and libraries.
* Compiler checks consolidated in always-compiler-options.m4
and renamed for consistency.
* -fstack-check compiler flag was removed, this functionality
is provided by asan when configured with --enable-asan.
* Split DEBUG_CFLAGS in to DEBUG_CFLAGS, DEBUG_CPPFLAGS, and
DEBUG_LDFLAGS.
* Moved default kernel build flags in to module/Makefile.in and
split in to ZFS_MODULE_CFLAGS and ZFS_MODULE_CPPFLAGS. These
flags are set with the standard ccflags-y kbuild mechanism.
* -Wframe-larger-than checks applied only to binaries or
libraries which include source files which are built in
both user space and kernel space. This restriction is
relaxed for user space only utilities.
* -Wno-unused-but-set-variable applied only to libzfs and
libzpool. The remaining warnings are the result of an
ASSERT using a variable when is always declared.
* -D_POSIX_PTHREAD_SEMANTICS and -D__EXTENSIONS__ dropped
because they are Solaris specific and thus not needed.
* Ensure $GDB is defined as gdb by default in zloop.sh.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7027
As a performance optimization Lustre does not strictly update
the SA_ZPL_SIZE when adding/removing from non-directory entries.
This results in entries which cannot be removed through the ZPL
layer even though the ZAP is empty and safe to remove.
Resolve this issue by checking the zap_count() directly instead
on relying on the cached SA_ZPL_SIZE. Micro-benchmarks show no
significant performance impact due to the additional overhead
of using zap_count().
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7019
kmem_alloc(0, ...) in userspace returns a leakable pointer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Issue #6941
When the compressed ARC feature was added in commit d3c2ae1
the method of reference counting in the ARC was modified. As
part of this accounting change the arc_buf_add_ref() function
was removed entirely.
This would have be fine but the arc_buf_add_ref() function
served a second undocumented purpose of updating the ARC access
information when taking a hold on a dbuf. Without this logic
in place a cached dbuf would not migrate its associated
arc_buf_hdr_t to the MFU list. This would negatively impact
the ARC hit rate, particularly on systems with a small ARC.
This change reinstates the missing call to arc_access() from
dbuf_hold() by implementing a new arc_buf_access() function.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6171Closes#6852Closes#6989
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: John Kennedy <jwk404@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>
PROBLEM
=======
There's a race condition that exists if `zil_free_lwb` races with either
`zil_commit_waiter_timeout` and/or `zil_lwb_flush_vdevs_done`.
Here's an example panic due to this bug:
> ::status
debugging crash dump vmcore.0 (64-bit) from ip-10-110-205-40
operating system: 5.11 dlpx-5.2.2.0_2017-12-04-17-28-32b6ba51fb (i86pc)
image uuid: 4af0edfb-e58e-6ed8-cafc-d3e9167c7513
panic message:
BAD TRAP: type=e (#pf Page fault) rp=ffffff0010555970 addr=60 occurred in module "zfs" due to a NULL pointer dereference
dump content: kernel pages only
> $c
zio_shrink+0x12()
zil_lwb_write_issue+0x30d(ffffff03dcd15cc0, ffffff03e0730e20)
zil_commit_waiter_timeout+0xa2(ffffff03dcd15cc0, ffffff03d97ffcf8)
zil_commit_waiter+0xf3(ffffff03dcd15cc0, ffffff03d97ffcf8)
zil_commit+0x80(ffffff03dcd15cc0, 9a9)
zfs_write+0xc34(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
fop_write+0x5b(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
write+0x250(42, fffffd7ff4832000, 2000)
sys_syscall+0x177()
If there's an outstanding lwb that's in `zil_commit_waiter_timeout`
waiting to timeout, waiting on it's waiter's CV, we must be sure not to
call `zil_free_lwb`. If we end up calling `zil_free_lwb`, then that LWB
may be freed and can result in a use-after-free situation where the
stale lwb pointer stored in the `zil_commit_waiter_t` structure of the
thread waiting on the waiter's CV is used.
A similar situation can occur if an lwb is issued to disk, and thus in
the `LWB_STATE_ISSUED` state, and `zil_free_lwb` is called while the
disk is servicing that lwb. In this situation, the lwb will be freed by
`zil_free_lwb`, which will result in a use-after-free situation when the
lwb's zio completes, and `zil_lwb_flush_vdevs_done` is called.
This race condition is prevented in `zil_close` by calling `zil_commit`
before `zil_free_lwb` is called, which will ensure all outstanding (i.e.
all lwb's in the `LWB_STATE_OPEN` and/or `LWB_STATE_ISSUED` states)
reach the `LWB_STATE_DONE` state before the lwb's are freed
(`zil_commit` will not return untill all the lwb's are
`LWB_STATE_DONE`).
Further, this race condition is prevented in `zil_sync` by only calling
`zil_free_lwb` for lwb's that do not have their `lwb_buf` pointer set.
All lwb's not in the `LWB_STATE_DONE` state will have a non-null value
for this pointer; the pointer is only cleared in
`zil_lwb_flush_vdevs_done`, at which point the lwb's state will be
changed to `LWB_STATE_DONE`.
This race *is* present in `zil_suspend`, leading to this bug.
At first glance, it would appear as though this would not be true
because `zil_suspend` will call `zil_commit`, just like `zil_close`, but
the problem is that `zil_suspend` will set the zilog's `zl_suspend`
field prior to calling `zil_commit`. Further, in `zil_commit`, if
`zl_suspend` is set, `zil_commit` will take a special branch of logic
and use `txg_wait_synced` instead of performing the normal `zil_commit`
logic.
This call to `txg_wait_synced` might be good enough for the data to
reach disk safely before it returns, but it does not ensure that all
outstanding lwb's reach the `LWB_STATE_DONE` state before it returns.
This is because, if there's an lwb "stuck" in
`zil_commit_waiter_timeout`, waiting for it's lwb to timeout, it will
maintain a non-null value for it's `lwb_buf` field and thus `zil_sync`
will not free that lwb. Thus, even though the lwb's data is already on
disk, the lwb will be left lingering, waiting on the CV, and will
eventually timeout and be issued to disk even though the write is
unnecessary.
So, after `zil_commit` is called from `zil_suspend`, we incorrectly
assume that there are not outstanding lwb's, and proceed to free all
lwb's found on the zilog's lwb list. As a result, we free the lwb that
will later be used `zil_commit_waiter_timeout`.
SOLUTION
========
The solution to this, is to ensure all outstanding lwb's complete before
calling `zil_free_lwb` via `zil_destroy` in `zil_suspend`. This patch
accomplishes this goal by forcing the normal `zil_commit` logic when
called from `zil_sync`.
Now, `zil_suspend` will call `zil_commit_impl` which will always use the
normal logic of waiting/issuing lwb's to disk before it returns. As a
result, any lwb's outstanding when `zil_commit_impl` is called will be
guaranteed to reach the `LWB_STATE_DONE` state by the time it returns.
Further, no new lwb's will be created via `zil_commit` since the zilog's
`zl_suspend` flag will be set. This will force all new callers of
`zil_commit` to use `txg_wait_synced` instead of creating and issuing
new lwb's.
Thus, all lwb's left on the zilog's lwb list when `zil_destroy` is
called will be in the `LWB_STATE_DONE` state, and we'll avoid this race
condition.
OpenZFS-issue: https://www.illumos.org/issues/8909
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ece62b6f8dCloses#6940
Our zfs backed Lustre MDT had soft lockups while under heavy metadata
workloads while handling transaction callbacks from osd_zfs.
The problem is zfs is not taking advantage of the fast path in
Lustre's trans callback handling, where Lustre will skip the calls
to ptlrpc_commit_replies() when it already saw a higher transaction
number.
This patch corrects this, it also has a positive impact on metadata
performance on Lustre with osd_zfs, plus some cleanup in the headers.
A similar issue for ext4/ldiskfs is described on:
https://jira.hpdd.intel.com/browse/LU-6527
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Closes#6986
Use timer_setup() macro and new timeout function definition.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#670Closes#671
When sequential scrubs were merged, all calls to arc_read()
(including prefetch IOs) were given ZIO_PRIORITY_ASYNC_READ.
Unfortunately, this behaves badly with an existing issue where
prefetch IOs cannot be re-prioritized after the issue. The
result is that synchronous reads end up in the same vdev_queue
as the scrub IOs and can have (in some workloads) multiple
seconds of latency.
This patch incorporates 2 changes. The first ensures that all
scrub IOs are given ZIO_PRIORITY_SCRUB to allow the vdev_queue
code to differentiate between these I/Os and user prefetches.
Second, this patch introduces zio_change_priority() to provide
the missing capability to upgrade a zio's priority.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6921Closes#6926
When the multihost property is enabled it should be impossible to
import an active pool even using the force (-f) option. This patch
prevents a forced import from succeeding when importing with a
stale cache file.
The root cause of the problem is that the kernel modules trusted
the hostid provided in configuration. This is always correct when
the configuration is generated by scanning for the pool. However,
when using an existing cache file the hostid could be stale which
would result in the activity check being skipped.
Resolve the issue by always using the hostid read from the label
configuration where the best uberblock was found.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6933Closes#6971
Suppress incorrect warnings from versions of objtool which are not
aware of x86 EVEX prefix instructions used for AVX512.
module/zfs/vdev_raidz_math_avx512bw.o: warning:
objtool: <func+offset>: can't find jump dest instruction at .text
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6928
This is a purely cosmetic change. The zilog's "zl_writer_lock" field is
being renamed to "zl_issuer_lock" to try and make the code easier to
understand; no other changes are made.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: C Fraire <cfraire@me.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8603
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2daf06546bCloses#6927
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>
Problem
=======
The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:
1. When there's outstanding ZIL blocks being written (i.e. there's
already a "writer thread" in progress), then any new calls to
zil_commit() will block waiting for the currently oustanding ZIL
blocks to complete. The blocks written for each "writer thread" is
coined a "batch", and there can only ever be a single "batch" being
written at a time. When a batch is being written, any new ZIL
transactions will have to wait for the next batch to be written,
which won't occur until the current batch finishes.
As a result, the underlying storage may not be used as efficiently
as possible. While "new" threads enter zil_commit() and are blocked
waiting for the next batch, it's possible that the underlying
storage isn't fully utilized by the current batch of ZIL blocks. In
that case, it'd be better to allow these new threads to generate
(and issue) a new ZIL block, such that it could be serviced by the
underlying storage concurrently with the other ZIL blocks that are
being serviced.
2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
to complete, prior to zil_commit() returning. The size of any given
batch is proportional to the number of ZIL transaction in the queue
at the time that the batch starts processing the queue; which
doesn't occur until the previous batch completes. Thus, if there's a
lot of transactions in the queue, the batch could be composed of
many ZIL blocks, and each call to zil_commit() will have to wait for
all of these writes to complete (even if the thread calling
zil_commit() only cared about one of the transactions in the batch).
To further complicate the situation, these two issues result in the
following side effect:
3. If a given batch takes longer to complete than normal, this results
in larger batch sizes, which then take longer to complete and
further drive up the latency of zil_commit(). This can occur for a
number of reasons, including (but not limited to): transient changes
in the workload, and storage latency irregularites.
Solution
========
The solution attempted by this change has the following goals:
1. no on-disk changes; maintain current on-disk format.
2. modify the "batch size" to be equal to the "ZIL block size".
3. allow new batches to be generated and issued to disk, while there's
already batches being serviced by the disk.
4. allow zil_commit() to wait for as few ZIL blocks as possible.
5. use as few ZIL blocks as possible, for the same amount of ZIL
transactions, without introducing significant latency to any
individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks.
In theory, with these goals met, the new allgorithm will allow the
following improvements:
1. new ZIL blocks can be generated and issued, while there's already
oustanding ZIL blocks being serviced by the storage.
2. the latency of zil_commit() should be proportional to the underlying
storage latency, rather than the incoming synchronous workload.
Porting Notes
=============
Due to the changes made in commit 119a394ab0, the lifetime of an itx
structure differs than in OpenZFS. Specifically, the itx structure is
kept around until the data associated with the itx is considered to be
safe on disk; this is so that the itx's callback can be called after the
data is committed to stable storage. Since OpenZFS doesn't have this itx
callback mechanism, it's able to destroy the itx structure immediately
after the itx is committed to an lwb (before the lwb is written to
disk).
To support this difference, and to ensure the itx's callbacks can still
be called after the itx's data is on disk, a few changes had to be made:
* A list of itxs was added to the lwb structure. This list contains
all of the itxs that have been committed to the lwb, such that the
callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(),
after the data for the itxs is committed to disk.
* A list of itxs was added on the stack of the zil_process_commit_list()
function; the "nolwb_itxs" list. In some circumstances, an itx may
not be committed to an lwb (e.g. if allocating the "next" ZIL block
on disk fails), so this list is used to keep track of which itxs
fall into this state, such that their callbacks can be called after
the ZIL's writer pipeline is "stalled".
* The logic to actually call the itx's callback was moved into the
zil_itx_destroy() function. Since all consumers of zil_itx_destroy()
were effectively performing the same logic (i.e. if callback is
non-null, call the callback), it seemed like useful code cleanup to
consolidate this logic into a single function.
Additionally, the existing Linux tracepoint infrastructure dealing with
the ZIL's probes and structures had to be updated to reflect these code
changes. Specifically:
* The "zil__cw1" and "zil__cw2" probes were removed, so they had to be
removed from "trace_zil.h" as well.
* Some of the zilog structure's fields were removed, which affected
the tracepoint definitions of the structure.
* New tracepoints had to be added for the following 3 new probes:
* zil__process__commit__itx
* zil__process__normal__itx
* zil__commit__io__error
OpenZFS-issue: https://www.illumos.org/issues/8585
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3aCloses#6566
When zfs_sticky_remove_access() was originally adapted for Linux
a typo was made which altered the intended behavior. As described
in the block comment, the intended behavior is that permission
should be granted when the entry is a regular file and you have
write access. That is, S_ISREG should have been used instead of
S_ISDIR.
Restricting permission to regular files made good sense for older
systems where setting the bit on executable files would instruct
the system to save the program's text segment on the swap device.
On modern systems this behavior has been replaced by the sticky
bit acting as a restricted deletion flag and the plain file
restriction has been relaxed.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6889Closes#6910
Using zio_data_buf_alloc() to allocate the itx's may be unsafe
because the itx->itx_lr.lrc_reclen field is not constant from
allocation to free. Using a different itx->itx_lr.lrc_reclen
size in zio_data_buf_free() can result in the allocation being
returned to the wrong kmem cache.
This issue can be avoided entirely by storing the allocation size
in itx->itx_size and using that for zio_data_buf_free().
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6912
When d4a72f23 was merged, pss_pass_issued was incorrectly
added to the middle of the pool_scan_stat_t structure
instead of the end. This patch simply corrects this issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6909
Fix a regression accidentally introduced in 1b81ab4 that prevents
'zfs get {user|group}objused@' from correctly reporting the requested
value.
Update "userspace_003_pos.ksh" and "groupspace_003_pos.ksh" to verify
this functionality.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6908
Fix build errors with gcc 7.2.0 on Gentoo with kernel 4.14
built with CONFIG_GCC_PLUGIN_RANDSTRUCT=y such as:
module/nvpair/nvpair.c:2810:2:error:
positional initialization of field in ?struct? declared with
'designated_init' attribute [-Werror=designated-init]
nvs_native_nvlist,
^~~~~~~~~~~~~~~~~
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mark Wright <gienah@gentoo.org>
Closes#5390Closes#6903
Resolve new warnings and errors from cppcheck v1.80.
* [lib/libshare/libshare.c:543]: (warning)
Possible null pointer dereference: protocol
* [lib/libzfs/libzfs_dataset.c:2323]: (warning)
Possible null pointer dereference: srctype
* [lib/libzfs/libzfs_import.c:318]: (error)
Uninitialized variable: link
* [module/zfs/abd.c:353]: (error) Uninitialized variable: sg
* [module/zfs/abd.c:353]: (error) Uninitialized variable: i
* [module/zfs/abd.c:385]: (error) Uninitialized variable: sg
* [module/zfs/abd.c:385]: (error) Uninitialized variable: i
* [module/zfs/abd.c:553]: (error) Uninitialized variable: i
* [module/zfs/abd.c:553]: (error) Uninitialized variable: sg
* [module/zfs/abd.c:763]: (error) Uninitialized variable: i
* [module/zfs/abd.c:763]: (error) Uninitialized variable: sg
* [module/zfs/abd.c:305]: (error) Uninitialized variable: tmp_page
* [module/zfs/zpl_xattr.c:342]: (warning)
Possible null pointer dereference: value
* [module/zfs/zvol.c:208]: (error) Uninitialized variable: p
Convert the following suppression to inline.
* [module/zfs/zfs_vnops.c:840]: (error)
Possible null pointer dereference: aiov
Exclude HAVE_UIO_ZEROCOPY and HAVE_DNLC from analysis since
these macro's will never be defined until this functionality
is implemented.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6879
Only access the `b_crypt_hdr` field of an ARC header if the content
is encrypted.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#6877
Currently, scrubs and resilvers can take an extremely
long time to complete. This is largely due to the fact
that zfs scans process pools in logical order, as
determined by each block's bookmark. This makes sense
from a simplicity perspective, but blocks in zfs are
often scattered randomly across disks, particularly
due to zfs's copy-on-write mechanisms.
This patch improves performance by splitting scrubs
and resilvers into a metadata scanning phase and an IO
issuing phase. The metadata scan reads through the
structure of the pool and gathers an in-memory queue
of I/Os, sorted by size and offset on disk. The issuing
phase will then issue the scrub I/Os as sequentially as
possible, greatly improving performance.
This patch also updates and cleans up some of the scan
code which has not been updated in several years.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Authored-by: Alek Pinchuk <apinchuk@datto.com>
Authored-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#3625Closes#6256
The kernel_read & kernel_write functions have always wrapped the
vfs_read & vfs_write functions respectively. However, they could
not be used by vn_rdwr() since the offset wasn't passed as a
pointer. This prevented us from being able to properly update
the file offset.
Linux 4.14 unexported vfs_read & vfs_write but also changed the
signature of kernel_read & kernel_write to provide the needed
functionality. Use these updated functions when available.
Reviewed-by: Pritam Baral <pritam@pritambaral.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#656Closes#667
The correct way to determine if a dnode is dirty is to check
if any of the dn->dn_dirty_link's are active. Relying solely
on the dn->dn_dirtyctx can result in the dnode being mistakenly
reported as clean.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3125Closes#6867
On Linux, ftruncate(2) always changes the file timestamps, even if the
file size is not changed. However, in case of a successfull
truncate(2), the timestamps are updated only if the file size changes.
This translates to the VFS calling the ZFS Posix Layer "setattr"
function (zpl_setattr) with ATTR_MTIME and ATTR_CTIME unconditionally
set on the iattr mask only when doing a ftruncate(2), while the
truncate(2) is left to the filesystem implementation to be dealt with.
This behaviour is consistent with POSIX:2004/SUSv3 specifications
where there's no explicit requirement for file size changes to update
the timestamps only for ftruncate(2):
http://pubs.opengroup.org/onlinepubs/009695399/functions/truncate.htmlhttp://pubs.opengroup.org/onlinepubs/009695399/functions/ftruncate.html
This has been later updated in POSIX:2008/SUSv4 where, for both
truncate(2)/ftruncate(2), there's no mention of this size change
requirement:
http://austingroupbugs.net/view.php?id=489http://pubs.opengroup.org/onlinepubs/9699919799/functions/truncate.htmlhttp://pubs.opengroup.org/onlinepubs/9699919799/functions/ftruncate.html
Unfortunately the Linux VFS is still calling into the ZPL without
ATTR_MTIME/ATTR_CTIME set in the truncate(2) case: we fix this by
explicitly updating the timestamps when detecting the ATTR_SIZE bit,
which is always set in do_truncate(), on the iattr mask.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6811Closes#6819
If the receive or rollback is performed while filesystem is upgrading
the objset may be evicted in `dsl_dataset_clone_swap_sync_impl`. This
will lead to NULL pointer dereference when upgrade tries to access
evicted objset.
This commit adds long hold of dataset during whole upgrade process.
The receive and rollback will return an EBUSY error until the
upgrade is not finished.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes#5295Closes#6837
After doing a recursive raw receive, zfs userspace performs
a final pass to adjust the encryption root hierarchy as
needed. Unfortunately, the FORCE_INHERIT ioctl had a bug
which caused the encryption root to always be assigned to
the direct parent instead of the inheriting parent. This
patch simply fixes this issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6847Closes#6848
In __dbuf_hold_impl(), if a buffer is currently syncing and is still
referenced from db_data, a copy is made in case it is dirtied again in
the txg. Previously, the buffer for the copy was simply allocated with
arc_alloc_buf() which doesn't handle compressed or encrypted buffers
(which are a special case of a compressed buffer). The result was
typically an invalid memory access because the newly-allocated buffer
was of the uncompressed size.
This commit fixes the problem by handling the 2 compressed cases,
encrypted and unencrypted, respectively, with arc_alloc_raw_buf() and
arc_alloc_compressed_buf().
Although using the proper allocation functions fixes the invalid memory
access by allocating a buffer of the compressed size, another unrelated
issue made it impossible to properly detect compressed buffers in the
first place. The header's compression flag was set to ZIO_COMPRESS_OFF
in arc_write() when it was possible that an attached buffer was actually
compressed. This commit adds logic to only set ZIO_COMPRESS_OFF in
the non-ZIO_RAW case which wil handle both cases of compressed buffers
(encrypted or unencrypted).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5742Closes#6797
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Toomas Soome <tsoome@me.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8607
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b852c2f5Closes#6842
When the 128KB block is compressed to less than 4KB, the pointer
to the Footer is not in the end of the compressed buffer, that's
because the Header offset was added twice for this case. So there
is a gap between the Footer and the compressed buffer.
1. Always compute the Footer pointer address from the start of the
last page.
2. Remove the un-used workaroud code which has been verified fixed
with the latest driver and this fix.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#6827
Fixed build regression in non-debug builds from recent cleanups of
c89 workarounds.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#6832
With PR 5756 the zfs module now supports c99 and the
remaining past c89 workarounds can be undone.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#6816
On systems with CONFIG_SMP turned off, spin_is_locked always returns
false causing these assertions to fail. Remove them as suggested in
zfsonlinux/zfs#6558.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Closes#665
Both vn_rename and vn_remove have been historically problematic
to implement reliably. Rather than fixing them yet again they
are being removed.
Reviewed-by: Arkadiusz Bubala <arkadiusz.bubala@open-e.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#648Closes#661
Fix compiler warnings in zdb. With these changes, FreeBSD can compile
zdb with all compiler warnings enabled save -Wunused-parameter.
usr/src/cmd/zdb/zdb.c
usr/src/cmd/zdb/zdb_il.c
usr/src/uts/common/fs/zfs/sys/sa.h
usr/src/uts/common/fs/zfs/sys/spa.h
Fix numerous warnings, including:
* const-correctness
* shadowing global definitions
* signed vs unsigned comparisons
* missing prototypes, or missing static declarations
* unused variables and functions
* Unreadable array initializations
* Missing struct initializers
usr/src/cmd/zdb/zdb.h
Add a header file to declare common symbols
usr/src/lib/libzpool/common/sys/zfs_context.h
usr/src/uts/common/fs/zfs/arc.c
usr/src/uts/common/fs/zfs/dbuf.c
usr/src/uts/common/fs/zfs/spa.c
usr/src/uts/common/fs/zfs/txg.c
Add a function prototype for zk_thread_create, and ensure that every
callback supplied to this function actually matches the prototype.
usr/src/cmd/ztest/ztest.c
usr/src/uts/common/fs/zfs/sys/zil.h
usr/src/uts/common/fs/zfs/zfs_replay.c
usr/src/uts/common/fs/zfs/zvol.c
Add a function prototype for zil_replay_func_t, and ensure that
every function of this type actually matches the prototype.
usr/src/uts/common/fs/zfs/sys/refcount.h
Change FTAG so it discards any constness of __func__, necessary
since existing APIs expect it passed as void *.
Porting Notes:
- Many of these fixes have already been applied to Linux. For
consistency the OpenZFS version of a change was applied if the
warning was addressed in an equivalent but different fashion.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Authored by: Alan Somers <asomers@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8081
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8aCloses#6787
When dumping objects larger than 128PiB it's possible for do_dump() to
miscalculate the FREE_RECORD offset due to an integer overflow
condition: this prevents the receiving end from correctly restoring
the dumped object.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6760
8558 lwp_create() returns EAGAIN on system with more than 80K ZFS filesystems
On a system with more than 80K ZFS filesystems, we've seen cases
where lwp_create() will start to fail by returning EAGAIN. The
problem being, for each of those 80K ZFS filesystems, a taskq will
be created for each dataset as part of the ZIL for each dataset.
Porting Notes:
- The new nomem taskq kstat was dropped.
- Added module options and documentation for new tunings
zfs_zil_clean_taskq_nthr_pct, zfs_zil_clean_taskq_minalloc,
zfs_zil_clean_taskq_maxalloc, and zfs_sync_taskq_batch_pct.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8558
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/216d772
8602 remove unused "dp_early_sync_tasks" field from "dsl_pool" structure
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8602
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2bcb545Closes#6779
Added -n flag to zpool reopen that allows a running scrub
operation to continue if there is a device with Dirty Time Log.
By default if a component device has a DTL and zpool reopen
is executed all running scan operations will be restarted.
Added functional tests for `zpool reopen`
Tests covers following scenarios:
* `zpool reopen` without arguments,
* `zpool reopen` with pool name as argument,
* `zpool reopen` while scrubbing,
* `zpool reopen -n` while scrubbing,
* `zpool reopen -n` while resilvering,
* `zpool reopen` with bad arguments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes#6076Closes#6746
History commands and events were being suppressed for the
'zpool create' command since the history object did not
yet exist. Create the object earlier so this history
doesn't get lost.
Split the pool_destroy event in to pool_destroy and
pool_export so they may be distinguished.
Updated events_001_pos and events_002_pos test cases. They
now check for the expected history events and were reworked
to be more reliable.
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6712Closes#6486
Support integration with new QAT products: Intel(R) C62x Chipset,
or Atom(R) C3000 Processor Product Family SoC:
1. Detect new file name in auto-conf.
2. Change MAX_INSTANCES to 48.
3. Change "num_inst" to U16 to clean a build warning.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#6767
The only place vn_rename and vn_remove are used is when writing
out an updated pool configuration file. By truncating the file
instead of renaming and removing it we can avoid having to implement
these interfaces entirely. Functionally an empty cache file is
treated the same as a missing cache file. This is particularly
advantageous because the Linux kernel has never provided a way
to reliably implement vn_rename and vn_remove.
The cachefile_004_pos.ksh test case was updated to understand
that an empty cache file is the same as a missing one.
The zfs-import-* systemd service files were not updated to use
ConditionFileNotEmpty in place of ConditionPathExists. This
means that after exporting all pools and rebooting new pools
will not the scanned for on the next boot. This small change
should not impact normal usage since pools are not exported
as part of a normal shutdown.
Documentation was updated accordingly.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/spl#648
Closes#6753
This small patch fixes an issue where dmu_free_long_object_raw()
calls dnode_hold() after freeing the dnode a line above.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6766
This PR includes fixes for bugs and documentation issues found
after the encryption patch was merged and general code improvements
for long-term maintainability.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #6526Closes#6639Closes#6703
Cloese #6706Closes#6714Closes#6595
This patch resolves an issue where raw sends would fail to send
encryption parameters if the wrapping key was unloaded and reloaded
before the data was sent and the dataset wass not an encryption root.
The code attempted to lookup the values from the wrapping key which
was not being initialized upon reload. This change forces the code to
lookup the correct value from the encryption root's DSL Crypto Key.
Unfortunately, this issue led to the on-disk DSL Crypto Key for some
non-encryption root datasets being left with zeroed out encryption
parameters. However, this should not present a problem since these
values are never looked at and are overrwritten upon changing keys.
This patch also fixes an issue where raw, resumable sends were not
being cleaned up appropriately if an invalid DSL Crypto Key was
received.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
This patch resolves an issue where spa_keystore_change_key_sync_impl()
incorrectly recursed into clone DSL Directories while recursively
rewrapping encryption keys. Clones share keys with their origins, so
this logic was incorrect.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Several issues were uncovered by running stress tests with zfs
encryption and raw sends in particular. The issues and their
associated fixes are as follows:
* arc_read_done() has the ability to chain several requests for
the same block of data via the arc_callback_t struct. In these
cases, the ARC would only use the first request's dsobj from
the bookmark to decrypt the data. This is problematic because
the first request might be a prefetch zio which is able to
handle the key not being loaded, while the second might use a
different key that it is sure will work. The fix here is to
pass the dsobj with each individual arc_callback_t so that each
request can attempt to decrypt the data separately.
* DRR_FREE and DRR_FREEOBJECT records in a send file were not
having their transactions properly tagged as raw during raw
sends, which caused a panic when the dbuf code attempted to
decrypt these blocks.
* traverse_prefetch_metadata() did not properly set
ZIO_FLAG_SPECULATIVE when issuing prefetch IOs.
* Added a few asserts and code cleanups to ensure these issues
are more detectable in the future.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
* PBKDF2 implementation changed to OpenSSL implementation.
* HKDF implementation moved to its own file and tests
added to ensure correctness.
* Removed libzfs's now unnecessary dependency on libzpool
and libicp.
* Ztest can now create and test encrypted datasets. This is
currently disabled until issue #6526 is resolved, but
otherwise functions as advertised.
* Several small bug fixes discovered after enabling ztest
to run on encrypted datasets.
* Fixed coverity defects added by the encryption patch.
* Updated man pages for encrypted send / receive behavior.
* Fixed a bug where encrypted datasets could receive
DRR_WRITE_EMBEDDED records.
* Minor code cleanups / consolidation.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
This patch resolves a minor issue where an ASSERT in
metaslab_passivate() that only applies to non weight-based
metaslabs was erroneously applied to all metaslabs.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Normally a SPARC processor runs in big endian mode. Save the extra labor
needed for little endian machines when the target is a big endian one
(sparc).
Signed-off-by: Pengcheng Xu <i@jsteward.moe>
Passing arguments explicitly into SHA1Transform() increases the number of
registers abailable to the compiler, hence leaving more local and out registers
available. The missing symbol of sha1_consts[], which prevents compiling on
SPARC, is added back, which speeds up the process of utilizing the relative
constants.
This should fix#6738.
Signed-off-by: Pengcheng Xu <i@jsteward.moe>
CID 147474: Logically dead code (DEADCODE)
Remove ternary operator and return `error` directly.
Currently return value is derived from a ternary operator. The
conditional is always true. The ternary operator is therefore
redundant i.e dead code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Closes#6723
When sending an incremental stream based on a snapshot, the receiving
side must have the same base snapshot. Thus we do not need to send
FREEOBJECTS records for any objects past the maximum one which exists
locally.
This allows us to send incremental streams (again) to older ZFS
implementations (e.g. ZoL < 0.7) which actually try to free all objects
in a FREEOBJECTS record, instead of bailing out early.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#5699Closes#6507Closes#6616
All objects after the last written or freed object are not supposed to
exist after receiving the stream. Free them accordingly, as if a
freeobjects record for them had been included in the stream.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#5699Closes#6507Closes#6616
With the addition of the ABD changes consumption of the virtual
address space has been greatly reduced. This exposed an issue on
CONFIG_HIGHMEM systems where free memory was being calculated
incorrectly. Functionally this didn't cause any major problems
prior to ABD because a lack of available virtual address space
was used as an indicator of low memory.
This patch makes the following changes to address the issue and
in the process realigns the code further with OpenZFS. There
are no substantive changes in behavior for 64-bit systems.
* Added CONFIG_HIGHMEM case to the arc_all_memory() and
arc_free_memory() functions to only consider low memory pages
on CONFIG_HIGHMEM systems.
* The arc_free_memory() function was updated to return bytes
instead of pages to be consistent with the other helper
functions. In user space we make up some reasonable values
since currently only testing is performed in this context.
* Adds three new values to the arcstats kstat to provide visibility
in to the ARC's assessment of the memory situation:
memory_all_bytes, memory_free_bytes, and memory_available_bytes.
* Added kmem_reap() call to arc_available_memory() for 32-bit
builds to realign code with OpenZFS.
* Reduced size of test file in /async_destroy_001_pos.ksh to
speed up test case. Multiple txgs are still required.
* Move vdevs used by zpool_clear_001_pos and zpool_upgrade_002_pos
to TEST_BASE_DIR location to speed up test cases.
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5352Closes#6734
When decrementing the struct_size and scatter_chunk_waste kstats
the value needs to be cast to an int on 32-bit systems.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6721
Currently `if` statement includes an assignment (from a function return
value) and a equality check. The parenthesis are in the incorrect place,
currently the code clobbers the function return value because of this.
We can fix this by simplifying the `if` statement.
`if (foo != 0)`
can be more succinctly expressed as
`if (foo)`
Remove the equality check, add parenthesis to correct the statement.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Closes#6685Close#6719
The vdev_copy_uberblocks() function should use abd_alloc_linear() to
allocate ub_abd, because abd_to_buf(ub_abd)) is used later.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#6718Closes#6713
The avl_update_* functions are never used by ZFS and are therefore
being removed. They're barely even used in Illumos. Additionally,
simplify avl_add() by using a VERIFY which produces exactly the same
behavior under Linux.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6716
When receiving a FREEOBJECTS record, receive_freeobjects()
incorrectly skips a freed object in some cases. Specifically, this
happens when the first object in the range to be freed doesn't exist,
but the second object does. This leaves an object allocated on disk
on the receiving side which is unallocated on the sending side, which
may cause receiving subsequent incremental streams to fail.
The bug was caused by an incorrect increment of the object index
variable when current object being freed doesn't exist. The
increment is incorrect because incrementing the object index is
handled by a call to dmu_object_next() in the increment portion of
the for loop statement.
Add test case that exposes this bug.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#6694Closes#6695
It's often useful to have access to txg history for debugging
purposes. This patch changes the default from 0 to 100 TXGs
worth of history preserved.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#6691
Commit d3c2ae1 introduced a dbuf cache with a default size of the
minimum of 100M or 1/32 maximum ARC size. (These figures may be adjusted
using dbuf_cache_max_bytes and dbuf_cache_max_shift.) The dbuf cache
is counted as metadata for the purposes of ARC size calculations.
On a 1GB box the ARC maximum size defaults to c_max 493M which gives a
dbuf cache default minimum size of 15.4M, and the ARC metadata defaults
to minimum 16M. I.e. the dbuf cache is an significant proportion of the
minimum metadata size. With other overheads involved this actually means
the ARC metadata doesn't get down to the minimum.
This patch dynamically scales the dbuf cache to the target ARC size
instead of statically scaling it to the maximum ARC size. (The scale is
still set by dbuf_cache_max_shift and the maximum size is still fixed by
dbuf_cache_max_bytes.) Using the target ARC size rather than the current
ARC size is done to help the ARC reach the target rather than simply
focusing on the current size.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #6506Closes#6561
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#6672
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes#652Closes#651
Rename it as mmp_random_leaf() since it is defined in mmp.c.
The earlier implementation could end up spinning forever if a pool had a
vdev marked writeable, none of whose children were writeable. It also
did not guarantee that if a writeable leaf vdev existed, it would be
found.
Reimplement to recursively walk the device tree to select the leaf. It
searches the entire tree, so that a return value of (NULL) indicates
there were no usable leaves in the pool; all were either not writeable
or had pending mmp writes.
It still chooses the starting child randomly at each level of the tree,
so if the pool's devices are healthy, the mmp writes go to random leaves
with an even distribution. This was verified by testing using
zfs_multihost_history enabled.
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6631Closes#6665
Increase the default arc_c_min value to which whichever is larger,
either 32M or 1/32 of total system memory. This is advantageous for
systems with more than 1G of memory where performance issues may
occur when the ARC is allowed to collapse below a minimum size.
At the same time we want to use the bare minimum value which is
still functional so the filesystem can be used in very low memory
environments.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6659
This symbol is needed by Lustre for the same reason it was needed
by the ZPL. It should have been exported when the original patch
was merged.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6660
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Feng Sun <loyou85@gmail.com>
Closes#6658
ZFS buildbot STYLE builder was moved to Ubuntu 17.04
which has a newer version of cppcheck. Handle the
new cppcheck errors.
uu_* functions removed in this commit were unused
and effectively dead code. They are now retired.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6653
generic_start_io_acct/generic_end_io_acct in the master
branch of the linux kernel requires that the request_queue
be provided.
Move the logic from freemem in the spl to arc_free_memory
in arc.c. Do this so we can take advantage of global_page_state
interface checks in zfs.
Upstream kernel replaced struct block_device with
struct gendisk in struct bio. Determine if the
function bio_set_dev exists during configure
and have zfs use that if it exists.
bio_set_dev https://github.com/torvalds/linux/commit/74d4699
global_node_page_state https://github.com/torvalds/linux/commit/75ef718
io acct https://github.com/torvalds/linux/commit/d62e26b
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6635
Changing any metadata, should modify the ctime.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes#3644Closes#6586
On pool import when the old cache file is removed
the ereport.fs.zfs.config_cache_write event is generated.
Because zpool export always removes cache file it happens
every export - import sequence.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes#6617
The portion of the zvol_replay_write() handler responsible for
replaying indirect log records for some reason never existed.
As a result indirect log records were not being correctly replayed.
This went largely unnoticed since the majority of zvol log records
were of the type WR_COPIED or WR_NEED_COPY prior to OpenZFS 7578.
This patch updates zvol_replay_write() to correctly handle these
log records and adds a new test case which verifies volume replay
to prevent any regression. The existing test case which verified
replay on filesystem was renamed slog_replay_fs.ksh for clarity.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6603Closes#6615
This reverts commit 65dcb0f67a until
a comprehensive fix is finalized. The stricter interior dnode
detection in 4c5b89f59e and the new
test case added by this patch revealed a issue with resizing
dnodes when receiving an incremental backup stream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #6576
Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the
code, fix errors introduced by commit dbeb879 (PR #6117) interacting
badly with large dnodes, and improve performance.
* When allocating a new dnode in dmu_object_alloc_dnsize(), update the
percpu object ID for the core's metadnode chunk immediately. This
eliminates most lock contention when taking the hold and creating the
dnode.
* Correct detection of the chunk boundary to work properly with large
dnodes.
* Separate the dmu_hold_impl() code for the FREE case from the code for
the ALLOCATED case to make it easier to read.
* Fully populate the dnode handle array immediately after reading a
block of the metadnode from disk. Subsequently the dnode handle array
provides enough information to determine which dnode slots are in use
and which are free.
* Add several kstats to allow the behavior of the code to be examined.
* Verify dnode packing in large_dnode_008_pos.ksh. Since the test is
purely creates, it should leave very few holes in the metadnode.
* Add test large_dnode_009_pos.ksh, which performs concurrent creates
and deletes, to complement existing test which does only creates.
With the above fixes, there is very little contention in a test of about
200,000 racing dnode allocations produced by tests 'large_dnode_008_pos'
and 'large_dnode_009_pos'.
name type data
dnode_hold_dbuf_hold 4 0
dnode_hold_dbuf_read 4 0
dnode_hold_alloc_hits 4 3804690
dnode_hold_alloc_misses 4 216
dnode_hold_alloc_interior 4 3
dnode_hold_alloc_lock_retry 4 0
dnode_hold_alloc_lock_misses 4 0
dnode_hold_alloc_type_none 4 0
dnode_hold_free_hits 4 203105
dnode_hold_free_misses 4 4
dnode_hold_free_lock_misses 4 0
dnode_hold_free_lock_retry 4 0
dnode_hold_free_overflow 4 0
dnode_hold_free_refcount 4 57
dnode_hold_free_txg 4 0
dnode_allocate 4 203154
dnode_reallocate 4 0
dnode_buf_evict 4 23918
dnode_alloc_next_chunk 4 4887
dnode_alloc_race 4 0
dnode_alloc_next_block 4 18
The performance is slightly improved for concurrent creates with
16+ threads, and unchanged for low thread counts.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5396Closes#6522Closes#6414Closes#6564
When receiving an incremental backup stream, call
dmu_object_reclaim_dnsize() if an object's dnode size differs between
the incremental source and target. Otherwise it may appear that a
dnode which has shrunk is still occupying slots which are in fact
free. This will cause a failure to receive new objects that should
occupy the now-free slots.
Add a test case to verify that an incremental stream containing
objects with changed dnode sizes can be received without error. This
test case fails without this change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#6366Closes#6576
Add a helper function to trim the tailing new line. While we're
here use this new hook to immediately apply the new scheduler.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3356Closes#6573
Add a small wrapper around libzfs_core`lzc_send_space() to libzfs so
that every legacy ZFS_IOC_SEND consumer, along with their userland
counterpart estimate_ioctl(), can leverage ZFS_IOC_SEND_SPACE to
request send space estimation.
The legacy functionality in zfs_ioc_send() is left untouched for
compatibility purposes.
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6029
Authored by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Andy Stormont <andyjstormont@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/2976
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5c5f137Closes#6582
Authored by: Eli Rosenthal <eli.rosenthal@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7028
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/86f617eCloses#6583
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7261
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/48dd5e6Closes#6579
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed-by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8375
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843c211Closes#6578
Fix a few nits in the comments from large dnodes. Also import
some of the commit message as a comment in the code, making
it more accessible.
Reviewed-by: @rottegift
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matt Ahrens <mahrens@delphix.com>
Closes#6551
vm_node_stat must be used instead of vm_zone_stat. Unfortunately the
old code still compiles potentially leading to silent failure of
arc_evictable_memory()
AKAMAI: CR 3816601: Regression in zfs dropcache test
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#6528
Remove harmless duplicate multilist_link_init() introduced by
commit d3c2ae1.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#6552
This patch fixes several issues discovered after
the encryption patch was merged:
* Fixed a bug where encrypted datasets could attempt
to receive embedded data records.
* Fixed a bug where dirty records created by the recv
code wasn't properly setting the dr_raw flag.
* Fixed a typo where a dmu_tx_commit() was changed to
dmu_tx_abort()
* Fixed a few error handling bugs unrelated to the
encryption patch in dmu_recv_stream()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6512Closes#6524Closes#6545
Use fnvlist on user input would allow user to easily panic zfs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#6529
vdev_queue:
- Track the last position of each vdev, including the io size,
in order to detect linear access of the following zio.
- Remove duplicate `vq_lastoffset`
vdev_mirror:
- Correctly calculate the zio offset (signedness issue)
- Deprecate `vdev_queue_register_lastoffset()`
- Add `VDEV_LABEL_START_SIZE` to zio offset of leaf vdevs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#6461
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().
Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.
Fix this by taking a range lock on the whole block in zvol_get_data().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6238Closes#6315Closes#6356Closes#6477
It's not enough to preserve/restore MS_RDONLY on the superblock flags
to avoid remounting a snapshot read-write: be explicit about our
intentions to the VFS layer so the readonly bit is updated correctly
in do_remount_sb().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6510Closes#6515
* Removed zpios kmod, utility, headers and man page.
* Removed unused scripts zpios-profile/*, zpios-test/*,
zpool-config/*, smb.sh, zpios-sanity.sh, zpios-survey.sh,
zpios.sh, and zpool-create.sh.
* Removed zfs-script-config.sh.in. When building 'make' generates
a common.sh with in-tree path information from the common.sh.in
template. This file and sourced by the test scripts and used
for in-tree testing, it is not included in the packages. When
building packages 'make install' uses the same template to
create a new common.sh which is appropriate for the packaging.
* Removed unused functions/variables from scripts/common.sh.in.
Only minimal path information and configuration environment
variables remain.
* Removed unused scripts from scripts/ directory.
* Remaining shell scripts in the scripts directory updated to
cleanly pass shellcheck and added to checked scripts.
* Renamed tests/test-runner/cmd/ to tests/test-runner/bin/ to
match install location name.
* Removed last traces of the --enable-debug-dmu-tx configure
options which was retired some time ago.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6509
Added a 'corrupt' error option that will flip a bit in the data
after a read operation. This is useful for generating checksum
errors at the device layer (in a mirror config for example). It
is also used to validate the diagnosis of checksum errors from
the zfs diagnosis engine.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#6345
This change incorporates three major pieces:
The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.
The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.
The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#494Closes#5769
When doing read on a file open with O_SYNC, it will trigger zil_commit.
However for snapshot, there's no zil, so we shouldn't be doing that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#6478Closes#6494
The pool name can be 256 chars long. Today, in /proc/spl/kstat/zfs/
the name is limited to < 32 characters. This change is to allows
bigger pool names.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes#6481
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes#641
* Simplify threads, mutexs, cvs and rwlocks
* Update the zk_thread_create() function to use the same trick
as Illumos. Specifically, cast the new pthread_t to a void
pointer and return that as the kthread_t *. This avoids the
issues associated with managing a wrapper structure and is
safe as long as the callers never attempt to dereference it.
* Update all function prototypes passed to pthread_create() to
match the expected prototype. We were getting away this with
before since the function were explicitly cast.
* Replaced direct zk_thread_create() calls with thread_create()
for code consistency. All consumers of libzpool now use the
proper wrappers.
* The mutex_held() calls were converted to MUTEX_HELD().
* Removed all mutex_owner() calls and retired the interface.
Instead use MUTEX_HELD() which provides the same information
and allows the implementation details to be hidden. In this
case the use of the pthread_equals() function.
* The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had
any non essential fields removed. In the case of kthread_t
and kcondvar_t they could be directly typedef'd to pthread_t
and pthread_cond_t respectively.
* Removed all extra ASSERTS from the thread, mutex, rwlock, and
cv wrapper functions. In practice, pthreads already provides
the vast majority of checks as long as we check the return
code. Removing this code from our wrappers help readability.
* Added TS_JOINABLE state flag to pass to request a joinable rather
than detached thread. This isn't a standard thread_create() state
but it's the least invasive way to pass this information and is
only used by ztest.
TEST_ZTEST_TIMEOUT=3600
Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4547Closes#5503Closes#5523Closes#6377Closes#6495
If fault injection is enabled, the ZIO_FLAG_IO_RETRY could be set by
zio_handle_device_injection() to generate the FMA events and update
stats. Hence, ignore the flag and process such zios.
A better fix would be to add another flag in the zio_t to indicate that
the zio is failed because of a zinject rule. However, considering the
fact that we do this in debug bits, we could do with the crude check
using the global flag zio_injection_enabled which is set to 1 when
zinject records are added.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Closes#6383Closes#6384
This was probably accidentally committed in
aeb9baa618
Fix: handle NULL case in spl_kmem_free_track()
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#644
OpenZFS provides a library called tpool which implements thread
pools for user space applications. Porting this library means
the zpool utility no longer needs to borrow the kernel mutex and
taskq interfaces from libzpool. This code was updated to use
the tpool library which behaves in a very similar fashion.
Porting libtpool was relatively straight forward and minimal
modifications were needed. The core changes were:
* Fully convert the library to use pthreads.
* Updated signal handling.
* lmalloc/lfree converted to calloc/free
* Implemented portable pthread_attr_clone() function.
Finally, update the build system such that libzpool.so is no
longer linked in to zfs(8), zpool(8), etc. All that is required
is libzfs to which the zcommon soures were added (which is the way
it always should have been). Removing the libzpool dependency
resulted in several build issues which needed to be resolved.
* Moved zfeature support to module/zcommon/zfeature_common.c
* Moved ratelimiting to to module/zfs/zfs_ratelimit.c
* Moved get_system_hostid() to lib/libspl/gethostid.c
* Removed use of cmn_err() in zcommon source
* Removed dprintf_setup() call from zpool_main.c and zfs_main.c
* Removed highbit() and lowbit()
* Removed unnecessary library dependencies from Makefiles
* Removed fletcher-4 kstat in user space
* Added sha2 support explicitly to libzfs
* Added highbit64() and lowbit64() to zpool_util.c
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6442
Acquire zv_suspend_lock on first open and last close only.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#6342
Log contents of a receive record if an error occurs while writing
it out to the pool. This may help determine the cause when backup
streams are rejected as invalid.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#6465
When performing concurrent object allocations using the new
multi-threaded allocator and large dnodes it's possible to
allocate overlapping large dnodes.
This case should have been handled by detecting an error
returned by dnode_hold_impl(). But that logic only checked
the returned dnp was not-NULL, and the dnp variable was not
reset to NULL when retrying. Resolve this issue by properly
checking the return value of dnode_hold_impl().
Additionally, it was possible that dnode_hold_impl() would
misreport a dnode as free when it was in fact in use. This
could occurs for two reasons:
* The per-slot zrl_lock must be held over the entire critical
section which includes the alloc/free until the new dnode
is assigned to children_dnodes. Additionally, all of the
zrl_lock's in the range must be held to protect moving
dnodes.
* The dn->dn_ot_type cannot be solely relied upon to check
the type. When allocating a new dnode its type will be
DMU_OT_NONE after dnode_create(). Only latter when
dnode_allocate() is called will it transition to the new
type. This means there's a window when allocating where
it can mistaken for a free dnode.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6414Closes#6439
taskq work item to more than one queue concurrently. Also, please
see discussion in zfsonlinux/zfs#3840.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#609
taskq_seq_show_impl walks the tq_active_list to show the tqent_func and
tqent_arg. However for taskq_dispatch_ent, it's very likely that the
task entry will be freed during the function call, and causes a
use-after-free bug.
To fix this, we duplicate the task entry to an on-stack struct, and
assign it instead to tqt_task. This way, the tq_lock alone will
guarantee its safety.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#638Closes#640
gcc-7 seems to use __udivmoddi4 for 64-bit division on 32-bit arch. This
patch implement them so we don't get undefined reference error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes zfsonlinux/zfs#6417
Closes#636
Update many return and assignment statements to follow the convention
of using the SET_ERROR macro when returning a hard-coded non-zero
value from a function. This aids debugging by recording the error
codes in the debug log.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#6441
While investigating https://github.com/zfsonlinux/zfs/issues/6425 I
noticed that ioctl ZIOs were not setting zio->io_delay correctly. They
would set the start time in zio_vdev_io_start(), but never set the end
time in zio_vdev_io_done(), since ioctls skip it and go straight to
zio_done(). This was causing spurious "delayed IO" events to appear,
which would eventually get rate-limited and displayed as
"Missed events" messages in zed.
To get around the problem, this patch only sets zio->io_delay for read
and write ZIOs, since that's all we care about anyway.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6425Closes#6440
At import time spa_import() calls zvol_create_minors() directly: with
the current implementation we have no way to avoid device node
creation when volmode=none.
Fix this by enforcing volmode=none directly in zvol_alloc().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6426
If we are in the middle of an incremental 'zfs receive', the child
.../%recv will exist. If we run 'zfs promote' .../%recv, it will "work",
but then zfs gets confused about the status of the new dataset.
Attempting to do this promote should be an error.
Similarly renaming .../%recv datasets should not be allowed.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#4843Closes#6339
Redefine the SET_ERROR macro in terms of __dprintf() so the error
return codes get logged as both tracepoint events (if tracepoints are
enabled) and as ZFS debug log entries. This also allows us to use
the same definition of SET_ERROR() in kernel and user space.
Define a new debug flag ZFS_DEBUG_SET_ERROR=512 that may be bitwise
or'd into zfs_flags. Setting this flag enables both dprintf() and
SET_ERROR() messages in the debug log. That is, setting
ZFS_DEBUG_SET_ERROR and ZFS_DEBUG_DPRINTF|ZFS_DEBUG_SET_ERROR are
equivalent (this was done for sake of simplicity). Leaving
ZFS_DEBUG_SET_ERROR unset suppresses the SET_ERROR() messages which
helps avoid cluttering up the logs.
To enable SET_ERROR() logging, run:
echo 1 > /sys/module/zfs/parameters/zfs_dbgmsg_enable
echo 512 > /sys/module/zfs/parameters/zfs_flags
Remove the zfs_set_error_class tracepoints event class since
SET_ERROR() now uses __dprintf(). This sacrifices a bit of
granularity when selecting individual tracepoint events to enable but
it makes the code simpler.
Include file, function, and line number information in debug log
entries. The information is now added to the message buffer in
__dprintf() and as a result the zfs_dprintf_class tracepoints event
class was changed from a 4 parameter interface to a single parameter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#6400
In unattended operations it's often more useful to have node
panic and reboot when it encounters problems as opposed to
sit there indefinitely waiting for somebody to discover it.
This implements an spl_panic_crash module parameter, set it
to nonzero to cause spl_panic() to call panic().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Closes#634
Check in the DMU whether an object record in a send stream being
received contains an unsupported dnode slot count, and return an
error if it does. Failure to catch an unsupported dnode slot count
would result in a panic when the SPA attempts to increment the
reference count for the large_dnode feature and the pool has the
feature disabled. This is not normally an issue for a well-formed
send stream which would have the DMU_BACKUP_FEATURE_LARGE_DNODE flag
set if it contains large dnodes, so it will be rejected as
unsupported if the required feature is disabled. This change adds a
missing object record field validation.
Add missing stream feature flag checks in
dmu_recv_resume_begin_check().
Consolidate repetitive comment blocks in dmu_recv_begin_check().
Update zstreamdump to print the dnode slot count (dn_slots) for an
object record when running in verbose mode.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#6396
'zpool clear' should be able to resume I/O on suspended, but otherwise
healthy, pools.
4a283c7 accidentally introduced a new code path where we call
txg_wait_synced() on the suspended pool before we had the chance to
resume I/O via zio_resume(): this results in the 'zpool clear'
command hanging indefinitely, waiting for a TXG that cannot be synced.
Fix this by avoiding the call to txg_wait_synced().
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6399
There is no need to perform the activity check before detecting that the
user must set the system hostid, because the pool's multihost property
is on, but spa_get_hostid() returned 0. The initial call to
vdev_uberblock_load() provided the information required.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6388
Add a callback to wake all running mmp threads when
zfs_multihost_interval is changed.
This is necessary when the interval is changed from a very large value
to a significantly lower one, while pools are imported that have the
multihost property enabled.
Without this commit, the mmp thread does not wake up and detect the new
interval until after it has waited the old multihost interval time. A
user monitoring mmp writes via the provided kstat would be led to
believe that the changed setting did not work.
Added a test in the ZTS under mmp to verify the new functionality is
working.
Added a test to ztest which starts and stops mmp threads, and calls into
the code to signal sleeping mmp threads, to test for deadlocks or
similar locking issues.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6387
The config lock must be held for the duration of the MMP write.
Since the I/Os are executed via map_nowait(), the done function
is the only place where we know the write has completed.
Since SCL_STATE is taken as reader, overlapping I/Os do not
create a deadlock. The refcount is simply increased when new
I/Os are queued and decreased when I/Os complete.
Test case added which exercises the probe IO call path to
verify the fix and prevent a regression.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6394
This reverts commit cc9c6bc, which has been causing intermittent
test failures on buildbot. A correct fix for this locking issue
has been applied in a separate patch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
If we're creating a pool with version >= SPA_VERSION_DSL_SCRUB (v11)
we need to account for additional space needed by the origin dataset
which will also be snapshotted: "poolname"+"/"+"$ORIGIN"+"@"+"$ORIGIN".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6374
Commit 379ca9c Multi-modifier protection (MMP) used HZ to convert
nanoseconds to ticks for use with cv_timedwait() and ddi_get_lbolt().
The correct macro is hz, which is defined within the SPL for kernel
space, and within zfs_context.h for user space.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6357Closes#6360
CID 165755: Division or modulo by zero (DIVIDE_BY_ZERO)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6352
When we load a ZFS pool having spa_name equals to some existing kstat
we would have to create a duplicate entry, which procfs doesn't like.
For instance a ZFS pool named "zil" would have its kstat "txgs"
(module "zfs/zil") intalled under "/proc/spl/kstat/zfs/zil":
unfortunately we already have a kstat named "zil" (module "zfs")
installed in the same procfs location.
Avoid this issue by skipping the duplicate entry creation in procfs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#628
Commit torvalds/linux@4e4cbee9. The bio->bi_error field was
replaced with bio->bi_status which is an enum that describes
all possible error types.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6351
When an IO fails then zio_vdev_io_done() can call vdev_probe()
to determine the health of the vdev. This is safe as long as
the original zio was submitted with zio_wait() and holds the
SCL_STATE_ALL lock over the operation.
If zio_no_wait() was used then the done callback will submit
the probe IO outside the SCL_STATE_ALL lock and hit this
ASSERT in zio_create()
ASSERT(!vd || spa_config_held(spa, SCL_STATE_ALL, RW_READER));
Resolve the issue by only allowing vdev_probe() to be called
when there's a waiter indicating the caller is using zio_wait().
This assumes that caller is still holding SCL_STATE_ALL.
This issue isn't MMP specific but was surfaced when testing.
Without this patch it can be reproduced by running:
zpool set multihost on <pool>
zinject -d <vdev> -e io -T write -f 50 <pool> -L uber
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#745Closes#6279
Add multihost=on|off pool property to control MMP. When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp. Property defaults to off.
During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock. Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".
Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval. The period is specified in milliseconds. The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.
Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path. Abbreviated
output below.
$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg timestamp mmp_delay vdev_guid vdev_label vdev_path
20468 261337 250274925 68396651780 3 /dev/sda
20468 261339 252023374 6267402363293 1 /dev/sdc
20468 261340 252000858 6698080955233 1 /dev/sdx
20468 261341 251980635 783892869810 2 /dev/sdy
20468 261342 253385953 8923255792467 3 /dev/sdd
20468 261344 253336622 042125143176 0 /dev/sdab
20468 261345 253310522 1200778101278 2 /dev/sde
20468 261346 253286429 0950576198362 2 /dev/sdt
20468 261347 253261545 96209817917 3 /dev/sds
20468 261349 253238188 8555725937673 3 /dev/sdb
Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.
When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test. For example, the
pool is exported to run zdb and then imported again. Add a new ztest
function, "-M", to alter ztest behavior to prevent this.
Add new tests to verify the new functionality. Tests provided by
Giuseppe Di Natale.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#745Closes#6279
Historically the SPL cached the system hostid the first time it
was accessed. This was done to speed up subsequent accesses.
But in practice the system host id is rarely accessed and its
inconvenient that it doesn't promptly detect /etc/hostid
configuration changes. Therefore, zone_get_hostid() has been
updated to always refresh the system hostid reported.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#626
Authored by: Dave Eddy <dave@daveeddy.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Joshua M. Clulow <jmc@joyent.com>
Reviewed by: Josh Wilsdon <jwilsdon@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Alan Somers <asomers@gmail.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6939
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce1577bCloses#6328
The volmode property may be set to control the visibility of ZVOL
block devices.
This allow switching ZVOL between three modes:
full - existing fully functional behaviour (default)
dev - hide partitions on ZVOL block devices
none - not exposing volumes outside ZFS
Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.
This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.
Original-patch-by: mav <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
FreeBSD-commit: https://github.com/freebsd/freebsd/commit/dd28e6bbCloses#1796Closes#3438Closes#6233
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
* All hunks unrelated to ZFS were dropped.
OpenZFS-issue: https://www.illumos.org/issues/5428
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4585130Closes#6326
The sync thread is concurrently modifying dn_phys->dn_nlevels
while dbuf_dirty() is trying to assert something about it, without
holding the necessary lock. We need to move this assertion further down
in the function, after we have acquired the dn_struct_rwlock.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8126
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0ef125dCloses#6314
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085Closes#6319
Illumos 4080 inadvertently allows 'zpool clear' on readonly pools: fix
this by reintroducing a check (POOL_CHECK_READONLY) in zfs_ioc_clear
registration code.
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6306
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.
This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#6167
On the single core machine the system may hang when the
spa_namespare_lock acquisition fails in the zvol_first_open
function. It returns -ERESTARTSYS error what causes the
endless loop in __blkdev_get function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes#6283Closes#6312
Clang doesn't support `/` as comment in assembly, this patch replaces
them with `#`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Leorize <alaviss@users.noreply.github.com>
Closes#6311
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The problem is that zfs_get_data() supplies a stale zgd_bp to
dmu_sync(), which we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it
copies db_blkptr to zgd_bp, dbuf_write_ready() could change
db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale BP and that the dbuf it not dirty,
so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after
acquiring the db_mtx. We could still see a stale db_blkptr,
but if it is stale then the dirty record will still exist and
thus we won't attempt to nopwrite.
OpenZFS-issue: https://www.illumos.org/issues/8378
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3127742Closes#6293
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The existing kernel-side code only provides a method to rollback to a
latest snapshot, whatever it happens to be at the time when the rollback
is actually done. That could be unsafe or confusing in environments
where concurrent DSL changes are possible as the resulting state could
correspond to a newer or older snapshot than the originally requested
one.
This change allows to amend that method such that the rollback is
performed only when the latest snapshot has a specific name. That is,
if a new snapshot is concurrently created or the target snapshot is
destroyed, then no rollback is done and EXDEV error is returned.
New libzfs_core function lzc_rollback_to() is provided for the new
functionality. libzfs is changed to use lzc_rollback_to() to implement
zfs rollback command.
Perhaps we should return different errors to distinguish the case where
the desired snapshot exists but it's not the latest snapshot and the
case where the desired snapshot does not exist.
OpenZFS-issue: https://www.illumos.org/issues/7600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3d645ebCloses#6292
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7910
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cb6af4bCloses#6291
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The problem is that when dsl_bookmark_destroy_check() is
executed from open context (the pre-check), it fills in
dbda_success based on the existence of the bookmark. But
the bookmark (or containing filesystem as in this case)
can be destroyed before we get to syncing context. When
we re-run dsl_bookmark_destroy_check() in syncing context,
it will not add the deleted bookmark to dbda_success,
intending for dsl_bookmark_destroy_sync() to not process
it. But because the bookmark is still in dbda_success from
the open-context call, we do try to destroy it.
The fix is that dsl_bookmark_destroy_check() should not
modify dbda_success when called from open context.
OpenZFS-issue: https://www.illumos.org/issues/8377
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b0b6fe3Closes#6286
Resolves issues discovered when porting to OpenZFS.
* Lint warnings.
* Made dnode_move_impl() large dnode aware. This
functionality is currently unused on Linux.
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#6262
Make zfs_arc_meta_limit_percent and zfs_arc_dnode_limit_percent behave
as you would expect from zfs-module-parameters.5.
- recalculate arc_meta_limit if zfs_arc_meta_limit_percent changes
- recalculate arc_dnode_limit if zfs_arc_dnode_limit_percent changes
- correctly set arc_meta_limit and arc_dnode_limit if zfs_arc_max or
zfs_arc_meta_min changes
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#6269
GCC 7.1 with will warn when we're not checking the snprintf()
return code in cases where the buffer could be truncated. This
patch either checks the snprintf return code (where applicable),
or simply disables the warnings (ztest.c).
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6253
Commit 8542ef8 allowed optional IOs to be aggregated beyond
the specified aggregation limit. Since the aggregation limit
was also used to enforce the maximum block size, setting
`zfs_vdev_aggregation_limit=16777216` could result in an
attempt to allocate an ABD larger than 16M.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6259Closes#6270
Use zv_state_lock to protect all members of zvol_state structure, add
relevant ASSERT()s. Take zv_suspend_lock before zv_state_lock, do not
hold zv_state_lock across suspend/resume.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#6226
In bqueue_dequeue(), call cv_signal() with bq_lock held.
Re-enable rsend_009_pos to test the fix.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#5887
In zfs/dmu_object and icp/core/kcf_sched, the CPU_SEQID macro
should be surrounded by `kpreempt_disable` and `kpreempt_enable`
calls to avoid a Linux kernel BUG warning. These code paths use
the cpuid to minimize lock contention and is is safe to reschedule
the process to a different processor at any time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Morgan Jones <me@numin.it>
Closes#6239
In the original form of device error injection, it was an all or nothing
situation. To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#6227
Use queue_flag_set_unlocked() in zvol_alloc().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Issue #6226
This continues what was started in
0eef1bde31 by fully converting zvols
to avoid unnecessary dnode_hold() calls. This saves a small amount
of CPU time and slightly improves latencies of operations on zvols.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@prophetstor.com>
Closes#6058
Buildbots and zfs-tests regularly see 7 kilobytes of stack
usage with this function. Convert self-calls to iterations
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#6219
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
The send size estimate for a zvol can be too low, if the size of the
record headers (dmu_replay_record_t's) is a significant portion of the
size. This is typically the case when the data is highly compressible,
especially with embedded blocks.
The problem is that dmu_adjust_send_estimate_for_indirects() assumes
that blocks are the size of the "recordsize" property (128KB). However,
for zvols, the blocks are the size of the "volblocksize" property (8KB).
Therefore, we estimate that there will be 16x less record headers than
there really will be.
The fix is to check the type of the object set (whether it is a zvol or
not) and pick the appropriate property. In addition, while we are at it,
we also add the size of the BEGIN and END records to the estimate.
OpenZFS-issue: https://www.illumos.org/issues/8056
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/faf09cdCloses#6205
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
dbuf_evict_notify() holds the dbuf_evict_lock while checking if it should
do the eviction itself (because the evict thread is not able to keep up).
This can result in massive lock contention. It isn't necessary to hold
the lock, because if we make the wrong choice occasionally, nothing bad
will happen. This commit results in a ~60% performance improvement for
ARC-cached sequential reads.
OpenZFS-issue: https://www.illumos.org/issues/8156
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f73e5d9Closes#6204
dmu_object_alloc() is single-threaded, so when multiple threads are
creating files in a single filesystem, they spend a lot of time waiting
for the os_obj_lock. To improve performance of multi-threaded file
creation, we must make dmu_object_alloc() typically not grab any
filesystem-wide locks.
The solution is to have a "next object to allocate" for each CPU. Each
of these "next object"s is in a different block of the dnode object, so
that concurrent allocation holds dnodes in different dbufs. When a
thread's "next object" reaches the end of a chunk of objects (by default
4 blocks worth -- 128 dnodes), it will be reset to the per-objset
os_obj_next, which will be increased by a chunk of objects (128). Only
when manipulating the os_obj_next will we need to grab the os_obj_lock.
This decreases lock contention dramatically, because each thread only
needs to grab the os_obj_lock briefly, once per 128 allocations.
This results in a 70% performance improvement to multi-threaded object
creation (where each thread is creating objects in its own directory),
from 67,000/sec to 115,000/sec, with 8 CPUs.
Work sponsored by Intel Corp.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/8199
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/374Closes#4703Closes#6117
- After some ZIL changes 6 years ago zil_slog_limit got partially broken
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
- Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
- Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
- While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
Authored by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7578
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13acCloses#6191
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
When writing pre-compressed buffers, arc_write() requires that
the compression algorithm used to compress the buffer matches
the compression algorithm requested by the zio_prop_t, which is
set by dmu_write_policy(). This makes dmu_write_policy() and its
callers a bit more complicated.
We simplify this by making arc_write() trust the caller to supply
the type of pre-compressed buffer that it wants to write,
and override the compression setting in the zio_prop_t.
OpenZFS-issue: https://www.illumos.org/issues/8155
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b55ff58Closes#6200
Since torvalds/linux@d0a5b99 IOP_XATTR is used to indicate the inode
has xattr support: clear it for the ctldir inodes to avoid EIO errors.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6189
When inheriting the "snapdev" property to we don't always call
zfs_prop_set_special(): this prevents device nodes from being created in
certain situations. Because "snapdev" is the only *special* property
that is also inheritable we need to call zfs_prop_set_special() even
when we're not reverting it to the received value ('zfs inherit -S').
Additionally, fix a NULL pointer dereference accidentally introduced in
5559ba0 that can be triggered when setting the "snapdev" property to
the value "hidden" twice.
Finally, add a new test case "zvol_misc_snapdev" to the ZFS Test Suite.
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6131Closes#6175Closes#6176
If, for example, your aux device was /dev/sdc, but now the aux device is
removed and /dev/sdc points to other device. zpool import will still
use that device and corrupt it.
The problem is that the spa_validate_aux in spa_import, rather than
validate the on-disk label, it would actually write label to disk. We
remove them since spa_load_{spares,l2cache} seems to do everything we
need and they would actually validate on-disk label.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#6158
Move kmem_free() so it's called for every error path: this is
preferred over making `dmu_object_info_t doi` local to accommodate
older kernels with limited stacks.
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6177
Added missing ida_simple_remove() in the error handling path.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Closes#6159Closes#6172
In certain cases (dsl_scan_sync() is one), we may end up calling
bpobj_iterate() on an empty bpobj. Even though we don't end up
modifying the bpobj it still gets dirtied, causing unneeded writes
to the pool.
This patch adds an early bail from bpobj_iterate_impl() if bpobj
is empty to prevent unneeded writes.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#6164
This reverts commit 959f56b993.
An issue was uncovered by the new zvol_misc_snapdev test case
which needs to be investigated and resolved.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6174
Issue #6131
When inheriting the "snapdev" property to we don't always call
zfs_prop_set_special(): this prevents device nodes from being created in
certain situations. Because "snapdev" is the only *special* property
that is also inheritable we need to call zfs_prop_set_special() even
when we're not reverting it to the received value ('zfs inherit -S').
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6131
Exclude Makefile.in in module/ and fix the gitignore in cmd/
Also, ignore *.patch and *.orig files
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Perform the already past expiration time check before updating
cvp->cv_mutex with the provided mutex. This check only depends
on local state. Doing it first ensures that cvp->cv_mutex will not
be updated in the timeout case or if it's ever called with an
expire_time <= now.
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#616
Provide a format parameter to super_setup_bdi_name() so we don't
create duplicate names in '/devices/virtual/bdi' sysfs namespace which
would prevent us from mounting more than one ZFS filesystem at a time.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6147
Sync with kernel patches for lz4
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/log/lib/lz4
4a3a99 lz4: add overrun checks to lz4_uncompress_unknownoutputsize()
d5e7ca LZ4 : fix the data abort issue
bea2b5 lib/lz4: Pull out constant tables
99b7e9 lz4: fix system halt at boot kernel on x86_64
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Feng Sun <loyou85@gmail.com>
Closes#5975Closes#5973
This addition will enable us to sync an open TXG to the main pool
on demand. The functionality is similar to 'sync(2)' but 'zpool sync'
will return when data has hit the main storage instead of potentially
just the ZIL as is the case with the 'sync(2)' cmd.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#6122
This patch adds a '-f' option to 'zpool offline' to fault a vdev
instead of bringing it offline. Unlike the OFFLINE state, the
FAULTED state will trigger the FMA code, allowing for things like
autoreplace and triggering the slot fault LED. The -f faults
persist across imports, unless they were set with the temporary
(-t) flag. Both persistent and temporary faults can be cleared
with zpool clear.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6094
One pre-check in zfs_ereport_start() was being called after
the nvlists were being allocated. This simply corrects that
issue.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6140
The lock is designed to protect internal state of zvol_state_t and
to avoid taking spa_namespace_lock (e.g. in dmu_objset_own() code path)
while holding zvol_stat_lock. Refactor the code accordingly.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3484Closes#6065Closes#6134
Fix lock order inversion with zvol_open() as it did not account
for use of zvols as vdevs. The latter use cases resulted in the
lock order inversion deadlocks that involved spa_namespace_lock
and bdev->bd_mutex.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #6065
Issue #6134
On a raidz vdev, a block that does not span all child vdevs, excluding
its skip sectors if any, may not be affected by a child vdev outage or
failure. In such cases, the block does not need to be resilvered.
However, current resilver algorithm simply resilvers all blocks on a
degraded raidz vdev. Such spurious IO is not only wasteful, but also
adds the risk of overwriting good data.
This patch eliminates such spurious IOs.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5316
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
A standard practice in ZFS is to keep track of "per-txg" state. Any of
the 3 active TXG's (open, quiescing, syncing) can have different values
for this state. We should assert that we do not attempt to modify other
(inactive) TXG's.
Porting Notes:
- ASSERTV added to txg_sync_waiting() for unused variable.
OpenZFS-issue: https://www.illumos.org/issues/8063
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01acb46Closes#6109
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
If we do a scrub while a leaf device is offline (via "zpool offline"),
we will inadvertently clear the DTL (dirty time log) of the offline
device, even though it is still damaged. When the device comes back
online, we will incompletely resilver it, thinking that the scrub
repaired blocks written before the scrub was started. The incomplete
resilver can lead to data loss if there is a subsequent failure of a
different leaf device.
The fix is to never clear the DTL of offline devices. Note that if a
device is onlined while a scrub is in progress, the scrub will be
restarted.
The problem can be worked around by running "zpool scrub" after
"zpool online".
OpenZFS-issue: https://www.illumos.org/issues/8166
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/372Closes#5806Closes#6103
The arc layer tracks checksums of its data in the arc header
so that it can ensure that buffers haven't changed when they're
not supposed to. This checksum is only maintained while there
is an uncompressed buffer still attached to the header.
Unfortunately there is a missing call to arc_free_cksum() in
arc_release() that can trigger ASSERTs. This has not been a
common issue because the checksums are only maintained for
debug builds and triggering the bug requires writing a block
(and therefore calling arc_release()) while a compressed buffer
is still being used on a debug build. This simply corrects the
issue.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#6105
Linux 4.9 added current_time() as the preferred interface to get
the filesystem time. CURRENT_TIME was retired in Linux 4.12.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6114
This allows users to specify "-o property=value" to override and
"-x property" to exclude properties when receiving a zfs send stream.
Both native and user properties can be specified.
This is useful when using zfs send/receive for periodic
backup/replication because it lets users change properties such as
canmount, mountpoint, or compression without modifying the source.
References:
https://www.illumos.org/issues/2745https://www.illumos.org/issues/3753
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#1350Closes#5349
Document the existence of `createtxg` and `guid` native properties
in man pages and zfs command output.
One of the great features of ZFS is incremental replication of
snapshots, possibly between pools on different machines.
Shell scripts are commonly used to auomate this procedure. They have to
find the most recent common snapshot between both sides and then
perform incremental send & recv.
Currently, scripts rely on the sorting order of `zfs list`, which
defaults to `createtxg`, and the assumption that snapshot names on
either side do not change.
By making `createtxg` and `guid` part of the public ZFS interface,
scripts are enabled to use
a) `createtxg` to determine the logical & temporal order of snapshots
(the creation property is not an equivalent substitute since
multiple snapshots may be created within one second)
b) `guid` to uniquely identify a snapshot, independent of its current
display name
This has the potential of making scripts safer and correct.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes#6102
zfsonlinux/spl@8f87971 added __spl_pf_fstrans_check for the xfs related
check, so we use them accordingly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#6113
Change SPL_FSTRANS to optionally contains PF_FSTRANS. Also, add
__spl_pf_fstrans_check for the checks specifically for PF_FSTRANS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#614
Remove the lz4_ac local variable from dmu_write_policy() to resolve
the following unused variable warning on non-debug builds.
dmu.c: In function ‘dmu_write_policy’:
dmu.c:1892:12: warning: unused variable ‘lz4_ac’ [-Wunused-variable]
boolean_t lz4_ac = spa_feature_is_active(os->os_spa,
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The proposed debugging enhancements in zfsonlinux/spl#587
identified the following missing *_destroy/*_fini calls.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5428
Change the default ZVOL behavior so requests are handled asynchronously.
This behavior is functionally the same as in the zfs-0.6.4 release.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5902
Linux has read-ahead logic designed to accelerate sequential workloads.
ZFS has its own read-ahead logic called zprefetch that operates on both
ZVOLs and datasets. Having two prefetchers active at the same time can
cause overprefetching, which unnecessarily reduces IOPS performance on
CoW filesystems like ZFS.
Testing shows that entirely disabling the Linux prefetch results in
a significant performance penalty for reads while commensurate benefits
are seen in random writes. It appears that read-ahead benefits are
inversely proportional to random write benefits, and so a single page
of Linux-layer read-ahead appears to offer the middle ground for both
workloads.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #5902
The current ZVOL implementation does not explicitly set merge
options on ZVOL device queues, which results in the default merge
behavior.
Explicitly set QUEUE_FLAG_NOMERGES on ZVOL queues allowing the
ZIO pipeline to do its work.
Initial benchmarks (tiotest with no O_DIRECT) show random write
performance going up almost 3X on 8K ZVOLs, even after significant
rewrites of the logical space allocation.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: RageLtMan <rageltman@sempervictus>
Issue #5902
This commit allow higher ashift values (up to 16) in 'zpool create'
The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.
Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.
Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.
Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#2024Closes#4205Closes#4740Closes#5763
When vdev_psize increases, the location of labels 2 and 3 changes
because their location is relative to the end of the device.
The configs for labels 2 and 3 are written during the next spa_sync()
because the vdev is added to the dirty config list. However, the
uberblock rings are not re-written in their new location, leaving the
device vulnerable to the beginning of the device being overwritten or
damaged.
This patch copies the uberblock ring from label 0 to labels 2 and 3,
in their new locations, at the next sync after vdev_psize increases.
Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks
are copied.
Reviewed-by: BearBabyLiu <liu.huang@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5108
When multiple filesystems are in use, memory pressure causes arc_cache
to collapse to a minimum. Allow arc_cache to maintain proportional size
even when hit rates are disproportionate. We do this only via evictable
size from the kernel shrinker, thus it's only in effect under memory
pressure.
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#6035
Could return the wrong pages value
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Calling it when nothing is evictable will cause extra kswapd cpu. Also
if we didn't shrink it's unlikely to have memory to reap because we
likely just called it microseconds ago. The exception is if we are in
direct reclaim.
You can see how hard this is being hit in kswapd with a light test
workload:
34.95% [zfs] [k] arc_kmem_reap_now
5.40% [spl] [k] spl_kmem_cache_reap_now
3.79% [kernel] [k] _raw_spin_lock
2.86% [spl] [k] __spl_kmem_cache_generic_shrinker.isra.7
2.70% [kernel] [k] shrink_slab.part.37
1.93% [kernel] [k] isolate_lru_pages.isra.43
1.55% [kernel] [k] __wake_up_bit
1.20% [kernel] [k] super_cache_count
1.20% [kernel] [k] __radix_tree_lookup
With ZFS just mounted but only ext4/pagecache memory pressure
arc_kmem_reap_now still consumes excessive CPU:
12.69% [kernel] [k] isolate_lru_pages.isra.43
10.76% [kernel] [k] free_pcppages_bulk
7.98% [kernel] [k] drop_buffers
7.31% [kernel] [k] shrink_page_list
6.44% [zfs] [k] arc_kmem_reap_now
4.19% [kernel] [k] free_hot_cold_page
4.00% [kernel] [k] __slab_free
3.95% [kernel] [k] __isolate_lru_page
3.09% [kernel] [k] __radix_tree_lookup
Same pagecache only workload as above with this patch series:
11.58% [kernel] [k] isolate_lru_pages.isra.43
11.20% [kernel] [k] drop_buffers
9.67% [kernel] [k] free_pcppages_bulk
8.44% [kernel] [k] shrink_page_list
4.86% [kernel] [k] __isolate_lru_page
4.43% [kernel] [k] free_hot_cold_page
4.00% [kernel] [k] __slab_free
3.44% [kernel] [k] __radix_tree_lookup
(arc_kmem_reap_now has 0 samples in perf)
AKAMAI: zfs: CR 3695042
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Lock contention, by itself, shouldn't indicate a stop condition to the
kernel's slab shrinker. Doing so can cause stalls when the kernel is
trying to free large parts of the cache such as is done by drop_caches
Also, perhaps arc_reclaim_lock should be a spinlock, and this code
eliminated.
AKAMAI: zfs: CR 3593801
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Move arcstat_need_free increment from all direct calls to when
arc_reclaim_lock is busy and we exit wihout doing anything. Data will
be reclaimed in reclaim thread. The previous location meant that we
both reclaim the memory in this thread, and also schedule the same
amount of memory for reclaim in arc_reclaim, effectively doubling the
requested reclaim.
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Ensures proper accounting of bytes we requested to free
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
Ghost meta/data buffers are not actually allocated
AKAMAI: zfs: CR 3695072
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Issue #6035
It doesn't need to have a loop to free page in a single scatterlist
entry because it should be single or compound page. The pages can be
freed in one invocation to __free_pages() for both cases.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Jinshan Xiong <jinshan.xiong@gmail.com>
Closes#6057
In current implementation, only zio buffers in 16KB and bigger are
guaranteed PAGESIZE alignment. This breaks Lustre since it assumes
that 'arc_buf_t::b_data' must be page aligned when zio buffers are
greater than or equal to PAGESIZE.
This patch will make the zio buffers to be PAGESIZE aligned when
the sizes are not less than PAGESIZE.
This change may cause a little bit memory waste but that should be
fine because after ABD is introduced, zio buffers are used to hold
data temporarily and live in memory for a short while.
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jinshan Xiong <jinshan.xiong@gmail.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Closes#6084
All filesystems were converted to dynamically allocated BDIs. The
destruction of backing_dev_info structures is handled as part of
super block destruction. Refactor the code to abstract away the
details of creating and destroying a BDI.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6089
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: bunder2015 <omfgbunder@gmail.com>
OpenZFS-issue: https://www.illumos.org/issues/7786
OpenZFS-commit: http://github.com/openzfs/openzfs/commit/db8498fCloses#6074
Commit 37f9dac removed the zvol_taskq for processing zvol requests.
This was removed as part of switching to make_request_fn and was
motivated by a concern at the time over dispatch latency.
However, this also made all bio request synchronous, and caused
serious performance issues as the bio submitter would wait for
every bio it submitted, effectively making the IO depth 1.
This patch reinstate zvol_taskq, and to make sure overlapped I/Os
are ordered properly, we take range lock in zvol_request, and pass
it along with bio to the I/O functions zvol_{write,discard,read}.
In order to facilitate benchmarks a zvol_request_sync module
option was added to switch between sync and async request handling.
For the moment, the default behavior is synchronous but this is
likely to change pending additional testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5824
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7628 - create long versions of ZFS send / receive options
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: bunder2015 <omfgbunder@gmail.com>
Ported-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Most of 7252 was already picked up during ABD work. This
commit represents the gap from the final commit to openzfs.
- Fixed split_large_blocks check in do_dump()
- An alternate version of the write_compressible() function was
implemented for Linux which does not depend on fio. The behavior
of fio differs significantly based on the exact version.
- mkholes was replaced with truncate for Linux.
OpenZFS-issue: https://www.illumos.org/issues/7252
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294Closes#6067
After run a long time with QAT compression, the variable "inst_num"
is overflow by "atomic_inc_32_nv", which causes its neighbor
variable overwritten. Change its definition from U16 to U32.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#6051
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
dbuf_read() creates a zio_root() to track and wait for all the zio's
that may happen as part of this call. However, if the blkptr_t for
this buffer is NULL or a hole, we will not create any more zio's, so
this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
The fix is to only create/destroy the zio_root() in dbuf_read() if the
blkptr is not NULL and not a hole.
Porting Notes:
- The error handling for when dbuf_read_impl() fails which was
originally added in commit 5f6d0b6f5 has been preserved.
OpenZFS-issue: https://www.illumos.org/issues/8025
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8ec5c7cCloses#6048
Fixup commit 66aca24. We should have equivalent return
values as generic_file_llseek() and advance to end of file.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#6050Closes#6053
The existing assertions in vdev_label_read() and vdev_label_write(),
testing which config locks are held, are incorrect. The assertions
test for locks which exceed what is required for safety.
Both vdev_label_{read,write}() are changed to assert SCL_STATE is held
as RW_READER or RW_WRITER. This is safe because:
Changes to the vdev tree occur under SCL_ALL as RW_WRITER, via
spa_vdev_enter() and spa_vdev_exit().
Changes to vdev state occur under SCL_STATE_ALL as RW_WRITER, via
spa_vdev_state_enter() and spa_vdev_state_exit().
Therefore, the new assertions guarantee that the vdev cannot change
out from under a zio, and I/O to a specified leaf vdev's label is
safe.
Furthermore, this is consistent with the SPA locking discussion in
spa_misc.c, "For any zio operation that takes an explicit vdev_t
argument ... zio_read_phys(), or zio_write_phys() ... SCL_STATE as
reader suffices."
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5983
Resilver operations frequently cause only a small amount of dirty data
to be written to disk at a time, resulting in the IO scheduler to only
issue 1 write at a time to the resilvering disk. When it is rotational
media the drive will often travel past the next sector to be written
before receiving a write command from ZFS, significantly delaying the
write of the next sector.
Raise zfs_vdev_async_write_min_active so that drives are kept fed
during resilvering.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Issue #4825Closes#5926
Authored by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
sa_find_idx_tab() is declared as taking and returning "void *" parameters.
These can be declared to be the specific types.
OpenZFS-issue: https://www.illumos.org/issues/8061
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4e64affCloses#6017
Authored by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
When querying ZPL properties verify that the objset is of type
DMU_OST_ZFS.
OpenZFS-issue: https://www.illumos.org/issues/6101
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce2243aCloses#6015
Force flushing of txg's can be painfully slow when competing for disk
IO, since this is a process meant to execute asynchronously. Optimize
this path via allowing data/hole seeking if the file is clean, but if
dirty fall back to old logic. This is a compromise to disabling the
feature entirely.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#4306Closes#5962
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- grub-2.02-beta2-422-gcad5cc0 includes support for large blocks.
- Commit 8aab121 allowed GZIP[1-9].
- Grub allows pools with multiple top-level vdevs.
OpenZFS-issue: https://www.illumos.org/issues/5120
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c8811bdCloses#6007
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Enable internal log for DEBUG builds and in zfs-tests.sh.
- callbacks/zfs_dbgmsg.ksh - Dump interal log via kstat.
- callbacks/zfs_dmesg.ksh - Dump dmesg log.
- default.cfg - 'Test Suite Specific Commands' dropped.
OpenZFS-issue: https://www.illumos.org/issues/7503
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a1300Closes#6002
In zfs_ereport_post, if an event is a rate limiting
event, immediately return before any processing is done.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5998
When we try assign a new transaction to a TXG we must know beforehand
if there is sufficient free space on disk. This is to decide,
in dmu_tx_assign(), if we should reject the TX with ENOSPC.
We rely on spa_get_worst_case_asize() to inflate the size of our
logical writes by a factor of spa_asize_inflation which is
calculated as:
(VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24
The problem with the current implementation is that we don't take
into account what happens with very small writes on VDEVs with large
physical block sizes.
Consider the case of writes to a dataset with recordsize=512,
copies=3 on a VDEV with ashift=13 (usually SSD with 8K block size):
every logical IO will end up allocating 3 * 8K = 24K on disk, so 512
bytes multiplied by 48, which is double the size we account for.
If we allow this kind of writes to be assigned a TX it is possible,
when the pool is almost full, to trigger an allocation failure
(ENOSPC) in the ZIO pipeline, which will in turn result in the whole
pool being suspended.
The bug is fixed by using, in spa_get_worst_case_asize(), the MAX()
value chosen between the logical io size from zfs_write() and the
maximum physical block size used among our VDEVs.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5941
Authored by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Ported-by: Matt Ahrens <mahrens@delphix.com>
RAID-Z requires that space be allocated in multiples of P+1 sectors,
because this is the minimum size block that can have the required amount
of parity. Thus blocks on RAIDZ1 must be allocated in a multiple of 2
sectors; on RAIDZ2 multiple of 3; and on RAIDZ3 multiple of 4. A sector
is a unit of 2^ashift bytes, typically 512B or 4KB.
To satisfy this constraint, the allocation size is rounded up to the
proper multiple, resulting in up to 3 "pad sectors" at the end of some
blocks. The contents of these pad sectors are not used, so we do not
need to read or write these sectors. However, some storage hardware
performs much worse (around 1/2 as fast) on mostly-contiguous writes
when there are small gaps of non-overwritten data between the writes.
Therefore, ZFS creates "optional" zio's when writing RAID-Z blocks that
include pad sectors. If writing a pad sector will fill the gap between
two (required) writes, we will issue the optional zio, thus doubling
performance. The gap-filling performance improvement was introduced in
July 2009.
Writing the optional zio is done by the io aggregation code in
vdev_queue.c. The problem is that it is also subject to the limit on
the size of aggregate writes, zfs_vdev_aggregation_limit, which is by
default 128KB. For a given block, if the amount of data plus padding
written to a leaf device exceeds zfs_vdev_aggregation_limit, the
optional zio will not be written, resulting in a ~2x performance
degradation.
The problem occurs only for certain values of ashift, compressed block
size, and RAID-Z configuration (number of parity and data disks). It
cannot occur with the default recordsize=128KB. If compression is
enabled, all configurations with recordsize=1MB or larger will be
impacted to some degree.
The problem notably occurs with recordsize=1MB, compression=off, with 10
disks in a RAIDZ2 or RAIDZ3 group (with 512B or 4KB sectors). Therefore
this problem has been known as "the 1MB 10-wide RAIDZ2 (or 3) problem".
The problem also occurs with the following configurations:
With recordsize=512KB or 256KB, compression=off, the problem occurs only
in rarely-used configurations:
* 4-wide RAIDZ1 with recordsize=512KB and ashift=12 (4KB sectors)
* 4-wide RAIDZ2 (either recordsize, either ashift)
* 5-wide RAIDZ2 with recordsize=512KB (either ashift)
* 6-wide RAIDZ2 with recordsize=512KB (either ashift)
With recordsize=1MB, compression=off, ashift=9 (512B sectors)
* RAIDZ1 with 4 or 8 disks
* RAIDZ2 with 4, 8, or 10 disks
* RAIDZ3 with 6, 8, 9, or 10 disks
With recordsize=1MB, compression=off, ashift=12 (4KB sectors)
* RAIDZ1 with 7 or 8 disks
* RAIDZ2 with 4, 5, or 10 disks
* RAIDZ3 with 6, 9, or 10 disks
With recordsize=2MB and larger (which can only be selected by changing
kernel tunables), many configurations are affected, including with
higher numbers of disks (up to 18 disks with recordsize=2MB).
Increase zfs_vdev_aggregation_limit to allow the optional zio to be
aggregated, thus eliminating the problem. Setting it to 256KB fixes all
commonly-used configurations.
The solution is to aggregate optional zio's regardless of the
aggregation size limit.
Analysis sponsored by Intel Corp.
OpenZFS-issue: https://www.illumos.org/issues/8005
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/321Closes#5931
Authored by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/2932
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43bCloses#5984Closes#5216
Authored by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
We don't want to dirty any data when we're in the final txgs of the pool
export logic. This change introduces checks to make sure that no data is
dirtied after a certain point. It also addresses the culprit of this
specific bug – the space map cannot be upgraded when we're in final
stages of pool export. If we encounter a space map that wants to be
upgraded in this phase, then we simply ignore the request as it will get
retried the next time we set the fragmentation metric on that metaslab.
OpenZFS-issue: https://www.illumos.org/issues/8023
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ef00f5Closes#5991
On 32-bit platforms spa_state is 32 bits without cast, and thus
caused a NULL pointer dereference when treated as 64bit in
var arg. Accidentally introduced by bcdb96a.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#5966Closes#5965
Authored by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
When a member of a RAIDZ has been replaced with a device smaller than
the original, then the top level vdev can report its expand size as
16.0E.
The reduced child asize causes the RAIDZ to have a vdev_asize lower than
its vdev_max_asize which then results in an underflow during the
calculation of the parents expand size.
Fix this by updating the vdev_asize if it shrinks, which is already
protected by a check against vdev_min_asize so should always be safe.
Also for RAIDZ vdevs, ensure that the sum of their child vdev_min_asize
is always greater than the parents vdev_min_size.
Reviewed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7885
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bb0dbaaCloses#5963
* Add ZPOOL pool state to zfs_post_common to
allow differentiation between export and destroy
by zedlets.
* Add pool name as standard export This ensures
pool name is exported to zedlets.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Closes#5942
Wherever possible it's best to avoid depending on a linear ABD.
Update the code accordingly in the following areas.
- vdev_raidz
- zio, zio_checksum
- zfs_fm
- change abd_alloc_for_io() to use abd_alloc()
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5668
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.
Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5878
The offset arguments is wrong when changing to abd_copy_off in a6255b7
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5932Closes#5936
For historical reasons zfs_mknode() was written such that it could
never fail. This poses a problem for Linux since zfs_znode_alloc()
could potentually failure due to low memory. Handle this gracefully
by retrying zfs_znode_alloc() until it succeeds, direct reclaim
will eventually be able to allocate memory.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5535Closes#5908
This patch implement the hardware accelerator method in GZIP compression
in ZFS. When the ZFS pool is enabled GZIP compression, the compression
API will be automatically transferred to the hardware accelerator to
free up CPU resource and speed up the compression time.
* To enable Intel QAT hardware acceleration in ZOL you need to have QAT
hardware and the driver installed:
* QAT hardware DH8950:
http://ark.intel.com/products/79483/Intel-QuickAssist-Adapter-8950
* QAT driver:
https://01.org/intel-quickassist-technology
* Start QAT driver in your system:
service qat_service start
* Enable QAT in ZFS, e.g.:
./configure --with-qat=<qat-driver-path>/QAT1.6
make
* Set GZIP compression in ZFS dataset:
zfs set compression = gzip <dataset>
* Get QAT hardware statistics by:
cat /proc/spl/kstat/zfs/qat
* To disable QAT in ZFS:
insmod zfs.ko zfs_qat_disable=1
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#5846
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
spa_sync() iterates over all the dirty dnodes and processes each of them
by calling dnode_sync(). If there are many dirty dnodes (e.g. because we
created or removed a lot of files), the single thread of spa_sync()
calling dnode_sync() can become a bottleneck. Additionally, if many
dnodes are dirtied concurrently in open context (e.g. due to concurrent
file creation), the os_lock will experience lock contention via
dnode_setdirty().
The solution is to track dirty dnodes on a multilist_t, and for
spa_sync() to use separate threads to process each of the sublists in
the multilist.
OpenZFS-issue: https://www.illumos.org/issues/7968
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4a2a54cCloses#5752
In torvalds/linux@a528d35, there are changes to the getattr family of functions,
struct kstat, and the interface of inode_operations .getattr.
The inode_operations .getattr and simple_getattr() interface changed to:
int (*getattr) (const struct path *, struct dentry *, struct kstat *,
u32 request_mask, unsigned int query_flags)
The request_mask argument indicates which field(s) the caller intends to use.
Fields the caller has not specified via request_mask may be set in the returned
struct anyway, but their values may be approximate.
The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.
Currently both fields are ignored. It is possible that getattr-related
functions within zfs could be optimized based on the request_mask.
struct kstat includes new fields:
u32 result_mask; /* What fields the user got */
u64 attributes; /* See STATX_ATTR_* flags */
struct timespec btime; /* File creation time */
Fields attribute and btime are cleared; the result_mask reflects this. These
appear to be optional based on simple_getattr() and vfs_getattr() within the
kernel, which take the same approach.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5875
Before kernel 2.6.29 credentials were embedded in task_structs, and zfs had
cases where one thread would need to refer to the credential of another thread,
forcing it to take a hold on the foreign thread's task_struct to ensure it was
not freed.
Since 2.6.29, the credential has been moved out of the task_struct into a
cred_t.
In addition, the mainline kernel originally did not export __put_task_struct()
but the RHEL5 kernel did, according to zfsonlinux/spl@e811949a57. As of
2.6.39 the mainline kernel exports it.
There is no longer zfs code that takes or releases holds on a task_struct, and
so there is no longer any reference to __put_task_struct().
This affects the linux 4.11 kernel because the prototype for
__put_task_struct() is in a new include file (linux/sched/task.h) and so the
config check failed to detect the exported symbol.
Removing the unnecessary stub and corresponding config check. This works on
kernels since the oldest one currently supported, 2.6.32 as shipped with
Centos/RHEL.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#608
There are changes to vfs_getattr() in torvalds/linux@a528d35. The new
interface is:
int vfs_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int query_flags)
The request_mask argument indicates which field(s) the caller intends to
use. Fields the caller does not specify via request_mask may be set in
the returned struct anyway, but their values may be approximate.
The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.
This patch uses the query_flags which result in vfs_getattr behaving the same
as it did with the 2-argument version which the kernel provided before
Linux 4.11.
Members blksize and blocks are now always the same size regardless of
arch. They match the size of the equivalent members in vnode_t.
The configure checks are modified to ensure that the appropriate
vfs_getattr() interface is used.
A more complete fix, removing the ZFS dependency on vfs_getattr()
entirely, is deferred as it is a much larger project.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#608
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
When we do a clone swap (caused by "zfs rollback" or "zfs receive"), the
ZPL doesn't completely reload the state from the DMU; some values remain
cached in the zfsvfs_t.
OpenZFS-issue: https://www.illumos.org/issues/6874
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1fdcbd0Closes#5888
Restructure the handling of mount options to be consistent with
upstream OpenZFS. This required making the following changes.
- The zfs_mntopts_t was renamed vfs_t and adjusted to provide
the minimal needed functionality. This includes a pointer
back to the associated zfsvfs_t. Plus it made it possible
to revert zfs_register_callbacks() and zfsvfs_create() back
to their original prototypes.
- A zfs_mnt_t structure was added for the sole purpose of
providing a structure to pass the osname and raw mount
pointer to zfs_domount() without having to copy them.
- Mount option parsing was moved down from the zpl_* wrapper
functions in to the zfs_* functions. This allowed for the
code to be simplied and it's where similar functionality
appears on other platforms.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Several functions were renamed when ZFS was originally ported to
Linux. Revert the code to the original names to minimize the
delta with upstream OpenZFS.
zfs_sb_teardown -> zfsvfs_teardown
zfs_sb_create -> zfsvfs_create
zfs_sb_setup -> zfsvfs_setup
zfs_sb_free -> zfsvfs_free
get_zfs_sb -> getzfsvfs
zfs_sb_hold -> zfsvfs_hold
zfs_sb_rele -> zfsvfs_rele
zfs_sb_prune_aliases -> zfs_prune_aliases (Linux-only)
zfs_sb_prune -> zfs_prune (Linux only)
Align the zfs_vnops.h and zfs_vfsops.h with upstream as much
as possible. Several prototypes were removed and those that
remain were reordered.
Move the EXPORT_SYMBOL lines to the end of the source files
for consistency with the other source files.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The use of zfs_sb_t instead of zfsvfs_t results in unnecessary
conflicts with the upstream source. Change all instances of
zfs_sb_t to zfsvfs_t including updating the variables names.
Whenever possible the code was updated to be consistent with
hope it appears in the upstream OpenZFS source.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The BLKFLSBUF ioctl is expected to do two things:
- flush dirty pages to stable storage, and
- invalidate clean pages
Unfortunately, the existing implementation of BLKFLSBUF in
zvol_ioctl() only flushes pages which are part of the current
TXG to disk. There may be additional dirty pages in the
page cache which haven't yet been submitted to the DMU and
therefore aren't part of any TXG.
Furthermore because zvol_ioctl() returns 0 the generic
blkdev_flushbuf() does not invalidate the page cache.
Resolve the issue by moving bdev_flush() in to zvol_ioctl()
and explicitly waiting for a full TXG sync. Then invalidate
the page cache. The associated ARC buffers need not be
evicted since they cannot be bypassed using O_DIRECT.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5871Closes#5879
Newer versions of cppcheck find the potential NULL pointer
bug in zfs_write(). The function is difficult to refactor without
extensive work, so suppress the potential NULL pointer error
which cannot occur for now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5882
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.
The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.
To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.
Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3794Closes#4716Closes#5810Closes#5833
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7867
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aa1f740dCloses#5874
Properly annotate functions and data section so that objtool does not complain
when CONFIG_STACK_VALIDATION and CONFIG_FRAME_POINTER are enabled.
Pass KERNELCPPFLAGS to assembler.
Use kfpu_begin()/kfpu_end() to protect SIMD regions in Linux kernel.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5872Closes#5041
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).
OpenZFS-issue: https://www.illumos.org/issues/7793
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a
Upstream bugs: DLPX-32883a
Closes#5804
Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
applied to OpenZFS.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7843
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4d519e7Closes#5868
Commit 933ec99 removes read and write from f_op because the vfs layer will
select iter_write or aio_write automatically. However, for Linux <= 4.0,
loop_set_fd will actually check f_op->write and set read-only if not exists.
This patch add them back and use the generic do_sync_{read,write} for
aio_{read,write} and new_sync_{read,write} for {read,write}_iter.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5776Closes#5855
Linux 4.11 introduces a new type, refcount_t, which conflicts with the
type of the same name defined within ZFS.
Rename the ZFS type zfs_refcount_t. Within the ZFS code, use a macro to
cause references to refcount_t to be changed to zfs_refcount_t at
compile time. This reduces conflicts when later landing OpenZFS
patches.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5823Closes#5842
0eef1bde31
introduced some changes which we slightly improved the style of when
porting to illumos.
There is also one minor error-handling fix, in zap_add() the "zap" may
become NULL in case of an error re-opening the ZAP.
Originally suggested at: https://github.com/openzfs/openzfs/pull/276
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5805
The commit a6255b7fce removed a few
assertions which help catch errors and improve code readability. It also
duplicated two conditionals, which was unnecessary and made the code
confusing to read. This patch cleans it up.
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5802
Authored by: Daniel Hoffman <dj.hoffman@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
This change removes all gendered language that did not refer specifically
to an individual person or pet. The convention taken was to use
variations on "they" when referring to users and/or human beings, while
using "it" when referring to code, functions, and/or libraries.
Additionally, we took the liberty to fix up any whitespace issues that
were found in any files that were already being modified.
OpenZFS-issue: https://www.illumos.org/issues/7812
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ad626dbCloses#5822
7200 no blocks must be born in a txg after a snaphot is created
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7199
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bfaed0bCloses#5817
After a hot spare replaces an OFFLINE vdev, the new
parent spare vdev state is set incorrectly to OFFLINE.
The correct state should be DEGRADED. The incorrect
OFFLINE state will prevent top-level vdev from reading
the spare vdev, thus causing unnecessary reconstruction.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5766Closes#5770
Replace uses of set_task_state(current, STATE) with
set_current_state(STATE).
In Linux 4.11, torvalds/linux@642fa44, set_task_state() is removed.
All spl uses are of the form set_task_state(current, STATE).
set_current_state(STATE) is equivalent and has been available since
Linux 2.2.26.
Furthermore, set_current_state(STATE) is already used in about 15
locations within spl. This change should have no impact other than
removing an unnecessary dependency.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#603
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists. This tuning may be overridden
on a per-multilist basis.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5764
A likely cut/paste error caused the description to be applied to
zfs_arc_average_blocksize.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5788
Doing the following command would return success with zfs creating an orphan
object.
touch $(for i in $(seq 256); do printf "n"; done)
The funny thing is that this will only work once for each directory, because
after upgraded to fzap, zfs_lookup would fail properly since it has additional
length check.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5768
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7104
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9Closes#5679
This is a race condition in the deadlist code.
A thread executing an administrative command that uses
dsl_deadlist_space_range() holds the lock of the whole deadlist_t to
protect the access of all its entries that the deadlist contains in an
avl tree.
Sync threads trying to insert a new entry in the deadlist (through
dsl_deadlist_insert() -> dle_enqueue()) do not hold the deadlist lock at
that moment. If the dle_bpobj is the empty bpobj (our sentinel value),
we close and reopen it. Between these two operations, it is possible
for the dsl_deadlist_space_range() thread to dereference that bpobj
which is NULL during that window.
Threads should hold the a deadlist's dl_lock when they manipulate its
internal data so scenarios like the one above are avoided.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5762
As explicitly stated in section 2 of the 'Programming rules'
comments at the top of zfs_vnops.c.
If you must call iput() within a tx then use zfs_iput_async().
Move iput() calls after dmu_tx_commit() / dmu_tx_abort when
possible. When not possible convert the iput() calls to
zfs_iput_async().
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5758
Add the appropriate compiler flags to accept c99 code. This will help to
minimize differences with upstream, and aid porting changes. One change was
necessary in zvol.c because the DEFINE_IDA() macro does not work with the new
compiler flags.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5756
When the code was added this tunable was not exposed via module params. Also it
was not documented. This patch changes the type from a uint32 to a ulong as
done with other percentage tunables and also documents it in the
zfs-module-parameters man page.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes#5750
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Alek Pinchuk <alek.pinchuk@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7448
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/295438bCloses#5737
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7247
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ad25b4Closes#5689
Porting notes:
- tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh
renamed as zfs_receive_015_pos.ksh, zfs_receive_013_pos.ksh is now
used for OpenZFS test.
- libzfs_sendrecv.c: SMALLEST_POSSIBLE_MAX_DDT_MB is always used
for all 32-bit builds.
For generic_write_checks with 2 args, we can exit when it returns zero because
it means count is zero. However this is not the case for generic_write_checks
with 4 args, where zero means no error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5720Closes#5726
This is effectively dead code for the Linux implementation which can
be removed to improve readability. We want to linter to check the
real production/debug build as much as possible.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5722
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7072
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c39a2aaCloses#5694
Porting notes:
- vdev.c: 'vdev_get_stats' changes are moved to 'vdev_get_stats_ex'.
- vdev_disk.c: ignored, Linux specific code is different.
This patch adds the necessary infrastructure for ABD to make use
of the vectorized fletcher 4 routines.
- export ABD compatible interface from fletcher_4
- add ABD fletcher_4 tests for data and metadata ABD types.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes#5589
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes: Moved reference_tracking_enable and
reference_history outside of ZFS_DEBUG.
OpenZFS-issue: https://www.illumos.org/issues/7545
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4dd77f9Closes#5701
The deadman in ZoL didn't behave quite as it did in upstream
OpenZFS. In addition to the 2 purposes for which OpenZFS used the
zfs_deadman_synctime_ms parameter, ZoL also used it to determine how
frequently the deadman would fire once it has been triggered.
This patch adds the zfs_deadman_checktime_ms parameter to control how
frequently the subsequent checks are performed.
The deadman is now disabled for suspended pools.
As had been the case, unlike upstream OpenZFS, ZoL will not panic when
a hung IO is detected.
The module parameter documentation has been upated to include the new
parameter and to better describe the operation of the deadmen.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5695
Resolve a false positive in the kmemleak checker by shifting to the
kernel slab. It shows up because vn_file_cache is using KMC_KMEM
which is directly allocated using __get_free_pages, which is not
automatically tracked by kmemleak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#599
Authored by: Alex Wilson <alex.wilson@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7019
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45b1747Closes#5709
Authored by: Alan Somers <asomers@gmail.com>
7115 6922 generates ESC_ZFS_VDEV_REMOVE_AUX a bit too often
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7136
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b72b6bbCloses#5691
Porting notes:
- Functionally this patch behaves the same as the OpenZFS
version but it was adapted because because ZoL doesn't
have the same illumos sysevent_t infrastructure and functionality.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7490
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6cedfc3Closes#5693
Authored by: Alan Somers <asomers@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6922
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/63364b0Closes#5690
Porting notes:
- 'zfs_dbgmsg_print()' reintroduced to userspace.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7277
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2fCloses#5684
After resuming a pool the godfather zio could have both the
ZIO_REEXECUTE_NOW and ZIO_REEXECUTE_SUSPEND bits set. This
can occur if some child zios set ZIO_REEXECUTE_NOW while
other set ZIO_REEXECUTE_SUSPEND. The godfather zio can
inherit both flags in zio_notify_parent().
The child zios which assigned the ZIO_REEXECUTE_SUSPEND flag
will be removed from the godfather's child list and added to
the spa->spa_suspend_zio_root child list. While child zios
with the ZIO_REEXECUTE_NOW bit set remain being monitored
by the godfather zio.
When the godfather zio executes zio_done() the presence of
the ZIO_REEXECUTE_SUSPEND bit results in all io_reexecute
being cleared. These child zios will then not be re-executed
and instead will be destroyed and lost.
The most straight forward way to address this situation is
to only clear the ZIO_REEXECUTE_SUSPEND bit and leave the
ZIO_REEXECUTE_NOW bit set.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7580
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3105d95Closes#5678
The .write/.read file operations callbacks can be retired since
support for .read_iter/.write_iter and .aio_read/.aio_write has
been added. The vfs_write()/vfs_read() entry functions will
select the correct interface for the kernel. This is desirable
because all VFS write/read operations now rely on common code.
This change also add the generic write checks to make sure that
ulimits are enforced correctly on write.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5587Closes#5673
metaslab_t:ms_freetree[TXG_SIZE] is only used in syncing context. We
should replace it with two trees: the freeing tree (ranges that we are
freeing this syncing txg) and the freed tree (ranges which have been
freed this txg).
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/7613
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a8698da2Closes#5598
Authored by: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7500
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/653af1bCloses#5639
When importing a pool with a large number of filesystems within the same
parent filesystem, we see that dmu_objset_find_dp() takes a long time.
It is called from 3 places: spa_check_logs(), spa_ld_claim_log_blocks(),
and spa_load_verify().
There are several ways to improve performance here:
1. We don't really need to do spa_check_logs() or
spa_ld_claim_log_blocks() if the pool was closed cleanly.
2. spa_load_verify() uses dmu_objset_find_dp() to check that no
datasets have too long of names.
3. dmu_objset_find_dp() is slow because it's doing
zap_value_search() (which is O(N sibling datasets)) to determine
the name of each dsl_dir when it's opened. In this case we
actually know the name when we are opening it, so we can provide
it and avoid the lookup.
This change implements fix#3 from the above list; i.e. make
dmu_objset_find_dp() provide the name of the dataset so that we don't
have to search for it.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <prashksp@gmail.com>
Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7606
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cac6babCloses#5662
When doing recv and rollback, dsl_dataset_clone_swap_sync_impl will be
called to swap out the ds_objset and do dmu_objset_evict on the old one.
However, currently zv->zv_objset will not be swapped out accordingly, so
if anyone currently holds a fd on the zvol, we risk hitting a use-after-free.
We fix this by introducing the suspend and resume mechanism of zsb to
zv. Before recv or rollback, we use zvol_suspend to block all access to
zv_objset and shut it down. After the recv or rollback, we use zvol_resume
to swap in zv_objset with the new ds_objset and unblock the access.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#4866Closes#5609
Porting notes:
- This issue was first fixed in ZoL by commit d862cb0d. That fix was
then modified and an equivalent version of the patch landed in the
upstream code base. For additional details see the discussion in
https://github.com/openzfs/openzfs/pull/24 .
This commit aligns ZoL with OpenZFS codebase.
Authored by: Andriy Gapon <avg@icyb.net.ua>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: George Melikov mail@gmelikov.ru
OpenZFS-issue: https://www.illumos.org/issues/6529
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e7e978bCloses#5606
Two threads send_traverse_thread() and receive_writer_thread() should
end with thread_exit();
Mostly a cosmetic issue under IllumOS.
Authored by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7659
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a569268Closes#5603
Authored by: Igor Kozhukhov ikozhukhov@gmail.com
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7071
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/25f7d99Closes#5597
Authored by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7082
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/10e67aaCloses#5596
SLAB_USERCOPY flag was used to indicate PAX
not to kill copies from kernel to userland.
With recent grsecurity patchset and
CONFIG_GRKERNSEC_HIDESYM that enables
CONFIG_PAX_USERCOPY zfs would panic.
Handle newer API while keeping old one functional.
Tested-by: RageLtMan <rageltman@sempervictus>
Reviewed-by: spendergrsec <spender@grsecurity.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kevin Tanguy <kevin.tanguy@ovh.net>
Closes#595
Fix dmu_object_next() to correctly handle unallocated objects on
large_dnode datasets.
We implement this by scanning the dnode block until we find the correct
offset to be used in dnode_next_offset(). This is necessary because we
can't assume *objectp is a hole even if dmu_object_info() returns
ENOENT.
This fixes a couple of issues with zfs receive on large_dnode datasets.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5027Closes#5532
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7181
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90f2c09Closes#5585
Assuming /bin/cp causes problems on systems where cp is
not in /bin such as NixOS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Closes#5548
Add *_by_dnode() routines for accessing objects given their
dnode_t *, this is more efficient than accessing the object by
(objset_t *, uint64_t object). This change converts some but
not all of the existing consumers. As performance-sensitive
code paths are discovered they should be converted to use
these routines.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Closes#5534
Issue #4802
When building SPL within the kernel tree, C99 initializers cause
build failures and need to be converted to C89 as kernel CFLAGS
specify -std=gnu89.
This fix was provided by @behlendorf in #595 discussion notes and
manually implemented in the current master revision.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: RageLtMan <rageltman@sempervictus>
Closes#597
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Joe Stein <jas14@cs.brown.edu>
Ported-by: Don Brady <don.brady@intel.com>
When loading a pool that had been created before the existance of
per-vdev zaps, on a system that knows about per-vdev zaps, the
per-vdev zaps will not be allocated and initialized.
This appears to be because the logic that would have done so, in
spa_sync_config_object(), is not reached under normal operation. It is
only reached if spa_config_dirty_list is non-empty.
The fix is to add another `AVZ_ACTION_` enum that will allow this code
to be reached when we detect that we're loading an old pool, even when
there are no dirty configs.
OpenZFS-issue: https://www.illumos.org/issues/7743
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/e2d29d0Closes#5582
This change introduces a new weighting algorithm to improve
metaslab selection. The new weighting algorithm relies on the
SPACEMAP_HISTOGRAM feature. As a result, the metaslab weight
now encodes the type of weighting algorithm used (size-based
vs segment-based).
Porting Notes: The metaslab allocation tracing code is conditionally
removed on linux (dependent on mdb debugger).
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov pavel.zakharov@delphix.com
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/7303
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d5190931bdCloses#5404
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
[bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API"
autotools checks to use an int to determine whether the various REQ_OP
values are defined. This should work properly on kernels >= 4.8.
[bio] bio_set_op_attrs() is now an inline function and can't be detected
with #ifdef. Add a configure check to determine whether bio_set_op_attrs()
is defined. Move the local definition of it from vdev_disk.c to
blkdev_compat.h for consistency with other related compability shims.
[bio] The read/write flags and their modifiers, including WRITE_FLUSH,
WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new
bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA
and set the flags appropriately for each supported kernel version.
[vfs] The generic_readlink() function has been made static. If .readlink
in inode_operations is NULL, generic_readlink() is used.
[zol typo] Completely unrelated to 4.10 compat, fix a typo in the check
for REQ_OP_SECURE_ERASE so that the proper macro is defined:
s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5499
Fix a regression accidentally introduced by e0ab3ab.
Additionally, add a new script zpool_import_014_pos.ksh to
the ZFS test suite to exercise 'zpool import -t' functionality.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5466Closes#5515
The introduction of parallel zvol prefetch causes deadlock when using
vdev_file.
spa_async->(spa_namespace_lock)->txg_wait_synced->(wait for txg_sync)
txg_sync->zio_wait->(wait for vdev_file_io_fsync on system_taskq)
zvol_prefetch_minors_impl (on system_taskq)->spa_open_common->(wait for spa_namespace_lock)
We fix this by using dedicated taskq for vdev_file. This same change
was originally made in commit bc25c93 but reverted in commit aa9af22
when dynamic taskqs were added.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#5506Closes#5495
When iterating over the input nvlist in dsl_props_set_sync_impl() when we don't
preserve the nvpair name before looking up ZPROP_VALUE, so when we later go to
process it nvpair_name() is always "value" and not the actual property name.
This fixes a couple of bugs in zfs_ioc_recv():
* Received properties were not restored correctly when failing to receive an
incremental send stream
* Received properties were not completely replaced by the new ones when
successfully receiving an incremental send stream
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5497
This branch contains the following fixes/improvements.
* Fix setting i_flags
* Fix wrong operator in xvattr.h
* Fix fchange macro in zpl_ioctl_setflags()
* Added configure check to use inode_set_flags()
* Added a test case for chattr for better test coverage
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5486Closes#5470Closes#5469
The main complication from the RT patch set is that the RW semaphore
locks change such that read locks on an rwsem can be taken only by
a single thread. All other threads are locked out. This single
thread can take a read lock multiple times though. The underlying
implementation changes to a mutex with an additional read_depth
count.
The implementation can be best understood by inspecting the RT
patch. rwsem_rt.h and rt.c give the best insight into how RT
rwsem works. My implementation for rwsem_tryupgrade is basically
an inversion of rt_downgrade_write found in rt.c. Please see the
comments in the code.
Unfortunately, I have to drop SPLAT rwlock test4 completely as this
test tries to take multiple locks from different threads, which RT
rwsems do not support. Otherwise SPLAT, zconfig.sh, zpios-sanity.sh
and zfs-tests.sh pass on my Debian-testing VM with the kernel
linux-image-4.8.0-1-rt-amd64.
Tested-by: kernelOfTruth <kerneloftruth@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Clemens Fruhwirth <clemens@endorphin.org>
Closes zfsonlinux/zfs#5491
Closes#589Closes#308
zfs_sb_create would normally takes ownership of zmo, and it will be freed in
zfs_sb_free. However, when zfs_sb_create fails we need to explicit free it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5490Closes#5496
The fchange in zpl_ioctl_setflags was for detecting flag change. However it
was incorrect and would always fail to detect a flag change from set to unset,
causing users without CAP_LINUX_IMMUTABLE to be able to unset flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Adapt avx512bw implementation for use with abd buffers. Mul2 implementation
is rewritten to take advantage of the BW instruction set.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Romain Dolbeau <romain.dolbeau@atos.net>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5477
Refactor the code by making splat_test_{init,fini}, splat_subsystem_{init,fini}
into functions. They don't have reason to be macro and it would be too bloated
to inline every call.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Fix zfs_xvattr_set to set S_IMMUTABLE and S_APPEND flags correctly.
Reinstate zfs_set_inode_flags and use it when zfs_xvatter_set and also when
setting up inode in zfs_znode_alloc and zfs_rezget.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
User of ida needs to call ida_destroy after using it. Otherwise
ida->free_bitmap and/or other stuff may leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5484
This removes two large whitespaces in "modinfo zfs" as well as correcting
a couple typos.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes#5475
Enable picky cstyle checks and resolve the new warnings. The vast
majority of the changes needed were to handle minor issues with
whitespace formatting. This patch contains no functional changes.
Non-whitespace changes are as follows:
* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5465
Don't count '@' for dataset namelen if not a snapshot. This
fixes making a pool unimportable when the dataset namelen
is 255.
Add test file for zfs create name length 255.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5432Closes#5456
CID 154617: Memory - illegal accesses (UNINIT)
The value here just needs to be initialized to make Coverity happy.
When dsize == 0, then value of daiter.iter_mapaddr is irrelevant. That
address won't be accessed, it's only used for some arithmetic. dsize
can be zero either if dabd is null, or if code column is longer than the
current data column.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5437
Speed up import and export speed by:
* Add system delay taskq
* Parallel prefetch zvol dnodes during zvol_create_minors
* Parallel zvol_free during zvol_remove_minors
* Reduce list linear search using ida and hash
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5433
Add a dedicated system_delay_taskq for long delay like spa_deadman and
zpl_posix_acl_free. This will allow us to use system_taskq in the manner of
dispatch multiple tasks and call taskq_wait_outstanding.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#588
Enable zio_dva_throttle_enabled=1 by default. Subsequent
testing has been unable to reproduce the suspected regression.
Tested-by: kernelOfTruth kerneloftruth@gmail.com
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf behlendorf1@llnl.gov
Reverts #5335Closes#5289Closes#5457
Save and reuse ddt dspace calculation when there have been no ddt changes.
This avoids unnecessary traversal of 168KiB of ddt histograms.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5425
It was observed that even when the txg history is disabled by
setting `zfs_txg_history=0` the txg_sync thread still fetches
the vdev stats unnecessarily.
This patch refactors the code such that vdev_get_stats() is no
longer called when `zfs_txg_history=0`. And it further reduces
the differences between upstream and the ZoL txg_sync_thread()
function.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5412
On some kernel version, blk_cleanup_queue and put_disk will wait for more then
10ms. So a pool with a lot of zvols will easily wait for more then 1 min if we
do zvol_free sequentially.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/588/head
Do parallel prefetch all zvol dnodes before actually creating each individual.
This will greatly reduce the import time when having a lot of zvols and disk
is slow.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
dbuf_read() creates a zio_root() to track and wait for all the
zio's that may happen as part of this call. However, if the blkptr_t
for this buffer is NULL or a hole, we will not create any more zio's,
so this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
The fix is to only create/destroy the zio_root() in dbuf_read() if
the blkptr is not NULL and not a hole.
Changes sponsored by Intel Corp.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue openzfs/openzfs#137
Closes#4803Closes#5382
This should be & and not | so is_metadata is set correctly.
Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5438
It looks like this was functionality which was added in the
original SA implementation and then never needed. It can
be safely removed now and easily added back if we find a
use for it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5440
zio.h includes zio_impl.h but zio_impl.h also includes zio.h, so the
header files to contain each other. Get rid of the zio_impl.h include
in zio.h and update zio_inject.c to include zio.h instead of zio_impl.h.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5439
Use it for spa_deadman, zpl_posix_acl_free, snapentry_expire.
This free system_taskq from the above long delay tasks, and allow us to do
taskq_wait_outstanding on system_taskq without being blocked forever, making
system_taskq more generic and useful.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
To prevent holding tq_lock for too long.
Before zfsonlinux/zfs@8e71ab9, hogging delay tasks and cat /proc/spl/taskq
would easily cause a lockup. While that bug has been fixed. It's probably
still a good idea to do this just in case task lists grow too large.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#586
In multiple cases zio_buf_alloc() was used instead of kmem_alloc()
or vmem_alloc(). This was often done because the allocations
could be large and it was easy to use zfs_buf_alloc() for them.
But this isn't ideal for allocations which are small or short
lived. In these cases it is better to use kmem_alloc() or
vmem_alloc(). If possible we want to avoid the case where
we have slabs allocated for kmem caches which are rarely used.
Note for small allocations vmem_alloc() will be internally
converted to kmem_alloc(). Therefore as long as large
allocations are infrequent and short lived the penalty for
using vmem_alloc() is small.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5409
* Convert ABD to use the Linux Kernel scatterlist implementation
instead of the hand rolled one from illumos.
* Scatter ABDs are preferentially populated with higher order
compound pages from a single zone. Allocation size is
progressively decreased until it can be satisfied without
performing reclaim or compaction.
* An alternate page allocator is provided for kernels older
than 3.6 and for CONFIG_HIGHMEM systems. This allocator
is designed as a fallback for maximum compatibility.
* Extended abdstats to provide visibility in the the allocator.
* Add cached value for PAGESIZE in userspace.
Contributions-by:
Chunwei Chen <david.chen@osnexus.com>
Gvozden Neskovic <neskovic@gmail.com>
Jinshan Xiong <jinshan.xiong@intel.com>
Isaac Huang <he.huang@intel.com>
David Quigley <david.quigley@intel.com>
Brian Behlendorf <behlendorf1@llnl.gov>
Enable vectorized raidz code on ABD buffers. The avx512f,
avx512bw, neon and aarch64_neonx2 are disabled in this commit.
With the exception of avx512bw these implementations are
updated for ABD in the subsequent commits.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
* userspace: aligned buffers. Minimum of 32B alignment is
needed for AVX2. Kernel buffers are aligned 512B or more.
* add abd_get_offset_size() interface
* abd_iter_map(): fix calculation of iter_mapsize
* add abd_raidz_gen_iterate() and abd_raidz_rec_iterate()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Linux kernel commit 723c038475b78 removed this field.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#5393
CID 147540: unsigned_compare
- Cast nsec to a int32_t to properly detect the expected overflow.
CID 147542: unsigned_compare
- intval can never be less than ZIO_FAILURE_MODE_WAIT which is
defined to be zero. Remove this useless check.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5379
It's used by Lustre to determine if the objset can be upgraded.
The inline version doesn't work because dmu_objset_is_snapshot()
is not exported.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Closes#5385
Linux 3.14 introduces inode->set_acl(). Normally, acl modification will come
from setxattr, which will handle by the acl xattr_handler, and we already
handles that well. However, nfsd will directly calls inode->set_acl or
return error if it doesn't exists.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Massimo Maggi <me@massimo-maggi.eu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5371Closes#5375
The phase 2 work primarily entails the Diagnosis Engine and
the Retire Agent modules. It also includes infrastructure
to support a crude FMD environment to host these modules.
The Diagnosis Engine consumes I/O and checksum ereports and
feeds them into a SERD engine which will generate a corres-
ponding fault diagnosis when the SERD engine fires. All the
diagnosis state data is collected into cases, one case per
vdev being tracked.
The Retire Agent responds to diagnosed faults by isolating
the faulty VDEV. It will notify the ZFS kernel module of
the new VDEV state (degraded or faulted). This agent is
also responsible for managing hot spares across pools.
When it encounters a device fault or a device removal it
replaces the device with an appropriate spare if available.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes#5343
Currently every calls to zpl_posix_acl_release will schedule a delayed task,
and each delayed task will add a timer. This used to be fine except for
possibly bad performance impact.
However, in Linux 4.8, a new timer wheel implementation[1] is introduced. In
this new implementation, the larger the delay, the less accuracy the timer is.
So when we have a flood of timer from zpl_posix_acl_release, they will expire
at the same time. Couple with the fact that task_expire will do linear search
with lock held. This causes an extreme amount of contention inside interrupt
and would actually lockup the system.
We fix this by doing batch free to prevent a flood of delayed task. Every call
to zpl_posix_acl_release will put the posix_acl to be freed on a lockless
list. Every batch window, 1 sec, the zpl_posix_acl_free will fire up and free
every posix_acl that passed the grace period on the list. This way, we only
have one delayed task every second.
[1] https://lwn.net/Articles/646950/
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Only restrict the maximum zio alloc size to 32-bit kernel space.
The same virtual address space limitations don't apply to user
space. This resolves a memory allocation failure in raidz_test
where it expects to be able to exercises all valid zio sizes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is the Fletcher4 algorithm implemented in pure C, but using
multiple counters using algorithms identical to those used for
SSE/NEON and AVX2.
This allows for faster execution on core with strong superscalar
capabilities but weak SIMD capabilities.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#5317
Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on
supported filesystem. It's basically doing open(2) and unlink(2) atomically.
The filesystem support is added through i_op->tmpfile. We basically copy the
create operation except we get rid of the link and name related stuff and add
the new node to unlinked set.
We also add support for linkat(2) to link tmpfile. However, since all previous
file operation will skip ZIL, we force a txg_wait_synced to make sure we are
sync safe.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Currently, doing things like fsetxattr(2) on an unlinked file will result in
ENODATA. There's two places that cause this: zfs_dirent_lock and zfs_zget.
The fix in zfs_dirent_lock is pretty straightforward. In zfs_zget though, we
need it to not return error when the zp is unlinked. This is a pretty big
change in behavior, but skimming through all the callers, I don't think this
change would cause any problem. Also there's nothing preventing z_unlinked
from being set after the z_lock mutex is dropped before but before zfs_zget
returns anyway.
The rest of the stuff is to make sure we don't log xattr stuff when owner is
unlinked.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
avx512f should work on all AVX512 hardware, since it only uses
Foundation instructions.
avx512bw should be faster on hardware supporting the AVW512BW
extension. We can use full-width pshufb (instead of relying on the 256
bits AVX2 pshufb). As a side-effect, the code is also unrolled more.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.github@dolbeau.name>
Closes#5219
On error dsl_prop_get_all_ds() does not free the nvlist it allocates.
This behavior may have been intentional when originally written
but is atypical and often confusing. Since no callers rely on this
behavior the function has been updated to always free the nvlist
on error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: BearBabyLiu <liu.huang@zte.com.cn>
Closes#5320
On 32-bit Linux systems use vmem_size() to correctly size the ARC
and better determine when IO should be throttle due to low memory.
On 64-bit systems this change has no effect since the virtual
address space available far exceeds the physical memory available.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347
A limit of 1TB exists for zvols on 32-bit systems. Update the code
to correctly reflect this limitation in a similar manor as the
OpenZFS implementation.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347
Originally the .zfs/snapshot directory was disabled for 32-bit systems
because 64-bit inode numbers were not supported. This is no longer
the case and this functionality can be enabled by default.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347Closes#2002
Add the TASKQID_INVALID macros and update callers to use the macro
instead of testing against 0. There is no functional change
even though the functions in zfs_ctldir.c incorrectly used -1
instead of 0.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5347
Add the TASKQID_INVALID and TASKQID_INITIAL macros and update the
taskq implementation and test cases to use them. This is solely
for the purposes of readability and introduces no functional change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add a minimal implementation of vmem_size() which accounts for the
virtual memory usage of the SPL's kmem cache. This functionality
is only useful on 32-bit systems with a small virtual address space.
The following assumptions are made:
1) The major SPL consumer of virtual memory is the kmem cache.
2) Memory allocated with vmem_alloc() is short lived and can be ignored.
3) Allow a 4MB floor as a generous pad given normal consumption.
4) The spl_kmem_cache_sem only contends with cache create/destroy.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Replace magic value 16 with ARRAY_SIZE() to correctly handle
when the sa_legacy_attrs array size changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5354
CID 147509: Explicit null dereferenced
- l2arc_sublist_lock is fragile as relied on caller too much.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5319
Ubuntu added support for checking inode permissions to lookup_bdev() in kernel
commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21).
Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517
This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and
calls the function in the correct way.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Closes#5336
Until it can be determined definitively that a performance
regression wasn't introduced accidentally by 3dfb57a this
functionality is being disabled by default. It can be re-
enabled by setting zio_dva_throttle_enabled=1.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5335
Issue #5289
- Fix autoreplace behaviour on statechange-led.sh script.
ZED sends the following events on an auto-replace:
1. statechange: Disk goes UNAVAIL->ONLINE
2. statechange: Disk goes ONLINE->UNAVAIL
3. vdev_attach: Disk goes ONLINE
Events 1-2 happen when ZED first attempts to do an auto-online. When that
fails, ZED then tries an auto-replace, generating the vdev_attach event in #3.
In the previous code, statechange-led was only looking at the UNAVAIL->ONLINE
transition to turn off the LED. It ignored the #2 ONLINE->UNAVAIL transition,
assuming it was just the "old" VDEV going offline. This is problematic, as
a drive can go from ONLINE->UNAVAIL when it's malfunctioning, and we don't want
to ignore that.
This new patch correctly turns on the fault LED every time a drive becomes
UNAVAIL. It also monitors vdev_attach events to trigger turning off the LED
when an auto-replaced disk comes online.
- Remove unnecessary libdevmapper warning with --with-config=kernel
This fixes an unnecessary libdevmapper warning when building
--with-config=kernel. Kernel code does not use libdevmapper, so the warning
is not needed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2375Closes#5312Closes#5331
Similar to commit a3600a106. Asm files need an explicit note
that they do not require an executable stack.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jason Zaman <jason@perfinion.com>
Closes#5332
This is caught by kmemleak when running compress_004_pos
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5244Closes#5330
When creating and destroying pools in tight loop it's possible to
exhaust the number of allowed threads on a system. This results
in taskq_create() failling and a NULL dereference.
Resolve the issue by falling back to opening the vdevs all
synchronously.
Reviewed-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/spl#521
Closes#4637
Previously when a drive faulted, the statechange-led.sh script would lookup
the drive's LED sysfs entry in /sys/block/sd*/device/enclosure_device, and
turn it on. During testing we noticed that if you pulled out a drive, or if
the drive was so badly broken that it no longer appeared to Linux, that the
/sys/block/sd* path would be removed, and the script could not lookup the
LED entry.
To fix this, this patch looks up the disks's more persistent
"/sys/class/enclosure/X:X:X:X/Slot N" LED sysfs path at pool import. It then
passes that path to the statechange-led script to use, rather than having the
script look it up on the fly. This allows the script to turn on/off the slot
LEDs even when the drive is missing.
Closes#5309Closes#2375
This is not useful on micro-architecture with a weak NEON
implementation (only 64 bits); the native version is slower &
the byteswap barely faster than scalar. On A53 or A57, it's
a small improvement on scalar but OK for byteswap.
Results from an A53 system:
0 0 0x01 -1 0 1499068294333000 1499101101878000
implementation native byteswap
scalar 1008227510 755880264
aarch64_neon 1198098720 1044818671
fastest aarch64_neon aarch64_neon
Results from a A57 system:
0 0 0x01 -1 0 4407214734807033 4407233933777404
implementation native byteswap
scalar 2302071241 1124873346
aarch64_neon 2542214946 2245570352
fastest aarch64_neon aarch64_neon
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#5248
The AVL tree compare function requires that either -1, 0, or 1 be
returned. However the strcmp() function only guarantees that a
negative, zero, or positive value is returned. Therefore, the
return value of strcmp() needs to be sanitized with AVL_ISIGN.
This was initially overlooked because the x86_64 implementation
of strcmp() happens to only returns the allowed values. This
was observed on an aarch64 platform which behaves correctly but
differently as described above.
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5311Closes#5313
In torvalds/linux@31051c8 the inode_change_ok() function was
renamed setattr_prepare() and updated to take a dentry ratheri
than an inode. Update the code to call the setattr_prepare()
and add a wrapper function which call inode_change_ok() for
older kernels.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/581/head
In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and
generic_{set,get,remove}xattr are removed. xattr operations will directly
go through sb->s_xattr.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are
merged together into iops->rename(), it now wants flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
These operations are dir specific, there's no point putting them in
zpl_inode_operations which is for regular files.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In Linux 4.9, torvalds/linux@81243ea, group_info changed from 2d array via
->blocks to 1d array via ->gid. We change the spl cred functions accordingly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#581
No need to crhold current_cred(), fix possible leak in splat_cred_test2
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#556
init_groups has 0 nblocks, therefore calling the current crgetgroups with
init_groups would result in out-of-bound access. We fix this by returning NULL
when nblocks is 0.
Cap crgetngroups to NGROUPS_PER_BLOCK, since crgetgroups will only return
blocks[0].
Also, remove all get_group_info. The cred already holds reference on the
group_info, and cred is not mutable. So there's no reason to hold extra
reference, if we hold cred.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#556
1. Enable multipath autoreplace support for FMA.
This extends FMA autoreplace to work with multipath disks. This
requires libdevmapper to be installed at build time.
2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online
Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must
be supported by the Linux SES driver for this to work. The enclosure LED
scripts work for multipath devices as well. The scripts will clear the LED
when the fault is cleared.
3. Rate limit ZIO delay and checksum events so as not to flood ZED
ZIO delay and checksum events are rate limited to 5/sec in the zfs module.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2449Closes#3017Closes#5159
CID 150926: Unchecked return value (CHECKED_RETURN)
- This case cannot occur given the existing taskq implementation
and flags passed to task_dispatch().
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5272
Accidentally introduced by 3dfb57a, when building with debugging
disabled several variables are unused. Resolve this by wrapping
them in ASSERTV to remove them for non-debug builds.
Reviewed by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5284
CID 150924: Unchecked return value (CHECKED_RETURN)
- On taskq_dispatch failure the reference must be dropped and
this entry can be safely skipped. This case should be impossible
in the existing implementation but should be handled regardless.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5278
OpenZFS 7090 - zfs should throttle allocations
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Ported-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
When write I/Os are issued, they are issued in block order but the ZIO
pipeline will drive them asynchronously through the allocation stage
which can result in blocks being allocated out-of-order. It would be
nice to preserve as much of the logical order as possible.
In addition, the allocations are equally scattered across all top-level
VDEVs but not all top-level VDEVs are created equally. The pipeline
should be able to detect devices that are more capable of handling
allocations and should allocate more blocks to those devices. This
allows for dynamic allocation distribution when devices are imbalanced
as fuller devices will tend to be slower than empty devices.
The change includes a new pool-wide allocation queue which would
throttle and order allocations in the ZIO pipeline. The queue would be
ordered by issued time and offset and would provide an initial amount of
allocation of work to each top-level vdev. The allocation logic utilizes
a reservation system to reserve allocations that will be performed by
the allocator. Once an allocation is successfully completed it's
scheduled on a given top-level vdev. Each top-level vdev maintains a
maximum number of allocations that it can handle (mg_alloc_queue_depth).
The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth)
are distributed across the top-level vdevs metaslab groups and round
robin across all eligible metaslab groups to distribute the work. As
top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.
OpenZFS-issue: https://www.illumos.org/issues/7090
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7Closes#5258
Porting Notes:
- Maintained minimal stack in zio_done
- Preserve linux-specific io sizes in zio_write_compress
- Added module params and documentation
- Updated to use optimize AVL cmp macros
The ICP requires destructors to for each crypto module that is added.
These do not necessarily exist in Illumos because they assume that
these modules can never be unloaded from the kernel. Some of this
cleanup code was missed when #4760 was merged, resulting in leaks.
This patch simply fixes that.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #4760Closes#5265
Fix use after free in zfsctl_snapshot_unmount(). Use /usr/bin/env
instead of /bin/sh to fix a shell code injection flaw and allow use
with grsecurity.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Stian Ellingsen <stian@plaimi.net>
Closes#5250Closes#4377
This is as much an upstream compatibility as it's a bit of a performance
gain.
The illumos taskq implemention doesn't allow a TASKQ_THREADS_CPU_PCT type
to be dynamic and in fact enforces as much with an ASSERT.
As to performance, if this taskq is dynamic, it can cause excessive
contention on tq_lock as the threads are created and destroyed because it
can see bursts of many thousands of tasks in a short time, particularly
in heavy high-concurrency zvol write workloads.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5236
When #4760 was merged tests were added to ensure that the new checksums
were working properly. However, some of the functionality for sha2
functions were not ported over, resulting in some Coverity defects and
code that would be unstable when needed in the future. This patch
simply ports over the missing code and fixes the defects in the
process.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #4760Closes#5251
The following new test cases need to have execute permissions set:
userquota/groupspace_003_pos.ksh
userquota/userquota_013_pos.ksh
userquota/userspace_003_pos.ksh
upgrade/upgrade_userobj_001_pos.ksh
upgrade/setup.ksh
upgrade/cleanup.ksh
The following source files accidentally were marked executable:
lib/libzpool/kernel.c
lib/libshare/nfs.c
lib/libzfs/libzfs_dataset.c
lib/libzfs/libzfs_util.c
tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c
tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c
cmd/zed/zed_exec.c
module/icp/core/kcf_sched.c
module/zfs/dsl_pool.c
module/zfs/arc.c
module/nvpair/nvpair.c
man/man5/zfs-module-parameters.5
Reviewed-by: GeLiXin <ge.lixin@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5241
Call mount and umount via /usr/bin/env instead of /bin/sh in
zfsctl_snapshot_mount() and zfsctl_snapshot_unmount().
This change fixes a shell code injection flaw. The call to /bin/sh
passed the mountpoint unescaped, only surrounded by single quotes. A
mountpoint containing one or more single quotes would cause the command
to fail or potentially execute arbitrary shell code.
This change also provides compatibility with grsecurity patches.
Grsecurity only allows call_usermodehelper() to use helper binaries in
certain paths. /usr/bin/* is allowed, /bin/* is not.
OpenZFS decided that ignore_hole_birth was too imprecise and
incorrect a name (and went with send_holes_without_birth_time).
Rename it in ZoL too, while keeping the name "ignore_hole_birth"
pointing to the same variable for existing consumers.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#5239
When iterating per_cpu values, we need to use for_each_possible_cpu. While
NR_CPUS indicates the number of CPU supported by the kernel, it might not
initialize all of them if the kernel decides it's not possible to use them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#578
Updating vd->vdev_parent->vdev_nonrot in vdev_open_child()
is a race when vdev_open_child is called for many children
from a task queue.
vdev_open_child() is only called by vdev_open_children(), let
the latter update the parent vdev_nonrot member. The update
was already there, so done twice previously. Thus using the
same logic at the end in vdev_open_children() to update
vdev_nonrot, either we are vdev_uses_zvols() or not.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5162
Fixes ABI issues with fletcher4 code, adds support for
incremental updates, and adds ztest method for testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5164
Using a benchmark which creates 2 million files in one TXG, I observe
that the thread running spa_sync() is on CPU almost the entire time we
are syncing, and therefore can be a performance bottleneck. About 50% of
the time in spa_sync() is in dmu_objset_do_userquota_updates().
The problem is that dmu_objset_do_userquota_updates() calls
zap_increment_int(DMU_USERUSED_OBJECT) once for every file that was
modified (or created). In this benchmark, all the files are owned by the
same user/group, so all 2 million calls to zap_increment_int() are
modifying the same entry in the zap. The same issue exists for the
DMU_GROUPUSED_OBJECT.
We should keep an in-memory map from user to space delta while we are
syncing, and when we finish, iterate over the in-memory map and modify
the ZAP once per entry. This reduces the number of calls to
zap_increment_int() from "number of objects modified" to "number of
owners/groups of modified files".
This reduced the time spent in spa_sync() in the file create benchmark
by ~33%, from 11 seconds to 7 seconds.
Upstream bugs: DLPX-44799
Ported by: Ned Bass <bass6@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6988
ZFSonLinux-issue: https://github.com/zfsonlinux/zfs/issues/4642
OpenZFS-commit: unmerged
Porting notes:
- Added curly braces around declaration of userquota_cache_t cache to
quiet compiler warning;
- Handled the userobj accounting the same way it proposed in this path.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.
ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Move the synchronization of inode/znode i_flgas/pflags into
the respective internal zfs function. This is mostly
mechanical work and shouldn't introduce any functional
changes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Issue #227Closes#5223
Init, compute, and fini methods are changed to work on internal context object.
This is necessary because ABI does not guarantee that SIMD registers will be preserved
on function calls. This is technically the case in Linux kernel in between
`kfpu_begin()/kfpu_end()`, but it breaks user-space tests and some kernels that
don't require disabling preemption for using SIMD (osx).
Use scalar compute methods in-place for small buffers, and when the buffer size
does not meet SIMD size alignment.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Combine incrementally computed fletcher4 checksums. Checksums are combined
a posteriori, allowing for parallel computation on chunks to be implemented if
required. The algorithm is general, and does not add changes in each SIMD
implementation.
New test in ztest verifies incremental fletcher computations.
Checksum combining matrix for two buffers `a` and `b`, where `Ca` and `Cb` are
respective fletcher4 checksums, `Cab` is combined checksum, `s` is size of buffer
`b` (divided by sizeof(uint32_t)) is:
Cab[A] = Cb[A] + Ca[A]
Cab[B] = Cb[B] + Ca[B] + s * Ca[A]
Cab[C] = Cb[C] + Ca[C] + s * Ca[B] + s(s+1)/2 * Ca[A]
Cab[D] = Cb[D] + Ca[D] + s * Ca[C] + s(s+1)/2 * Ca[B] + s(s+1)(s+2)/6 * Ca[A]
NOTE: this calculation overflows for larger buffers. Thus, internally, the calculation
is performed on 8MiB chunks.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Due to changes in the task_struct the following warning is occurs
when initializing the global p0. Since this structure only exists
for it's address to be taken initialize it in a manor which isn't
sensitive to internal changes to the structure.
module/spl/spl-generic.c:58:1: error: missing braces around
initializer [-Werror=missing-braces]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#576
Authored by: ilovezfs <ilovezfs@icloud.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
In any pool without the extensible dataset feature flag already enabled,
creating a dataset with dedup set to use one of the new checksums would
result in the following panic as soon as any data was added:
panic[cpu0]/thread=ffffff0006761c40: feature_get_refcount(spa, feature,
&refcount) != 48 (0x30 != 0x30), file: ../../common/fs/zfs/zfeature.c
line 390
Inpsection showed that feature->fi_feature was 7, which is the value of
SPA_FEATURE_EXTENSIBLE_DATASET in the spa_feature enum. This commit
adds extensible dataset as a dependency for the sha512, edonr, and skein
feature flags, which prevents the panic.
OpenZFS-issue: https://www.illumos.org/issues/6585
OpenZFS-commit: 892586e8a1
Porting Notes:
This code was originally from Illumos, but I actually ported it from:
openzfsonosx/zfs@b62a652
Authored by: ilovezfs <ilovezfs@icloud.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Tony Hutter <hutter2@llnl.gov>
zio_checksum_to_feature() expects a zio_checksum enum not a raw property
intval, so the new checksums weren't being detected when the
ZIO_CHECKSUM_VERIFY flag got in the way.
Given a pool without feature@sha512,
zfs create -o dedup=sha512 naughty/fivetwelve_noverify_ds
would fail as expected since the raw intval would indeed be equal to
SPA_FEATURE_SHA512.
However,
zfs create -o dedup=sha512,verify naughty/fivetwelve_verify_ds
would incorrectly succeed because ZIO_CHECKSUM_VERIFY would be in the
way, the raw intval would not be a member of the enum, and
zio_checksum_to_feature() would return SPA_FEATURE_NONE, with the result
that spa_feature_is_enabled() would never be called.
This was first detected with edonr, since in that case verify is
required.
This commit clears the ZIO_CHECKSUM_VERIFY flag before calling
zio_checksum_to_feature() using the ZIO_CHECKSUM_MASK and verifies in
zio_checksum_to_feature() that ZIO_CHECKSUM_MASK has been applied by the
caller to attempt to prevent the same bug from occurring again in the
future.
OpenZFS-issue: https://www.illumos.org/issues/6541
OpenZFS-commit: 971640e6aa
Porting notes:
This code was originally from Illumos, but I actually ported it from:
openzfsonosx/zfs@bef06e1
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee
Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:
b5e030c8db
The list of porting changes includes:
- Copied module/icp/include/sha2/sha2.h directly from illumos
- Removed from module/icp/algs/sha2/sha2.c:
#pragma inline(SHA256Init, SHA384Init, SHA512Init)
- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
it now takes in an extra parameter.
- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c
- Added skein & edonr to libicp/Makefile.am
- Added sha512.S. It was generated from sha512-x86_64.pl in Illumos.
- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.
- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
to not #include the non-existant endian.h.
- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
around a compiler warning.
- Fixup test files:
- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
- Remove <note.h> and define NOTE() as NOP.
- Define u_longlong_t
- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
- Rename NULL to 0 in "no test vector" array entries to get around a
compiler warning.
- Remove "for isa in $($ISAINFO); do" stuff
- Add/update Makefiles
- Add some userspace headers like stdio.h/stdlib.h in places of
sys/types.h.
- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.
- Update scripts/zfs2zol-patch.sed
- include <sys/sha2.h> in sha2_impl.h
- Add sha2.h to include/sys/Makefile.am
- Add skein and edonr dirs to icp Makefile
- Add new checksums to zpool_get.cfg
- Move checksum switch block from zfs_secpolicy_setprop() to
zfs_check_settable()
- Fix -Wuninitialized error in edonr_byteorder.h on PPC
- Fix stack frame size errors on ARM32
- Don't unroll loops in Skein on 32-bit to save stack space
- Add memory barriers in sha2.c on 32-bit to save stack space
- Add filetest_001_pos.ksh checksum sanity test
- Add option to write psudorandom data in file_write utility
This re-use the framework established for SSE2, SSSE3 and
AVX2. However, GCC is using FP registers on Aarch64, so
unlike SSE/AVX2 we can't rely on the registers being left alone
between ASM statements. So instead, the NEON code uses
C variables and GCC extended ASM syntax. Note that since
the kernel explicitly disable vector registers, they
have to be locally re-enabled explicitly.
As we use the variable's number to define the symbolic
name, and GCC won't allow duplicate symbolic names,
numbers have to be unique. Even when the code is not
going to be used (e.g. the case for 4 registers when
using the macro with only 2). Only the actually used
variables should be declared, otherwise the build
will fails in debug mode.
This requires the replacement of the XOR(X,X) syntax
by a new ZERO(X) macro, which does the same thing but
without repeating the argument. And perhaps someday
there will be a machine where there is a more efficient
way to zero a register than XOR with itself. This affects
scalar, SSE2, SSSE3 and AVX2 as they need the new macro.
It's possible to write faster implementations (different
scheduling, different unrolling, interleaving NEON and
scalar, ...) for various cores, but this one has the
advantage of fitting in the current state of the code,
and thus is likely easier to review/check/merge.
The only difference between aarch64-neon and aarch64-neonx2
is that aarch64-neonx2 unroll some functions some more.
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@atos.net>
Closes#4801
Explicitly cast type in splat-rwlock.c test case to silence
the following warning.
warning: format ‘%ld’ expects argument of type ‘long int’,
but argument N has type ‘int’
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#574
In the default case the function must return to avoid dereferencing
'prov_mech' which will be NULL.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: candychencan <chen.can2@zte.com.cn>
Closes#5134
coverity scan CID:147531,type: Argument cannot be negative
- may copy data with negative size
coverity scan CID:147532,type: resource leaks
- may close a fd which is negative
coverity scan CID:147533,type: resource leaks
- may call pwrite64 with a negative size
coverity scan CID:147535,type: resource leaks
- may call fdopen with a negative fd
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5176
Cppcheck 1.63 erroneously complains about an uninitialized value
in buf_init(). Newer versions of cppcheck (1.72) handle this
correctly but we'll initialize the value anyway to silence the
warning.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5203
Avoid calculating (1<<64) if lh_prefix_len == 0. Semantics of the method remain
the same.
Assert (lh_prefix_len > 0) in zap_expand_leaf() to detect possibly the same
problem.
Issue #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Explicitly promote variables to correct type. Undefined behavior is
reported because length of int is not well defined by C standard.
Issue #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Undefined operation is reported by running ztest (or zloop) compiled with GCC
UndefinedBehaviorSanitizer. Error only happens on top level of dnode indirection
with large enough offset values. Logically, left shift operation would work,
but bit shift semantics in C, and limitation of uint64_t, do not produce desired
result.
Issue #5059, #4883
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Without plugging, the default 'noop' scheduler will not merge
the BIOs which are part of a large ZIO.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5181
Refactor the code in such a way so that inode->i_mode is being set
at the same time zp->z_mode is being changed. This has the effect of
keeping both in sync without relying on zfs_inode_update.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#5158
In arc_state_fini() the `arc_l2c_only->arcs_list[*]` multilists
must be destroyed. This accidentally regressed in d3c2ae1c.
Reviewed by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5151Closes#5152
We must not use d_add_ci if the dentry already has the real name. Otherwise,
d_add_ci()->d_alloc_parallel() will find itself on the lookup hash and wait
on itself causing deadlock.
Tested-by: satmandu
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5124Closes#5141Closes#5147Closes#5148
coverity scan CID:147633,type: sizeof not portable
coverity scan CID:147637,type: sizeof not portable
coverity scan CID:147638,type: sizeof not portable
coverity scan CID:147640,type: sizeof not portable
In these particular cases sizeof (XX **) happens to be equal to sizeof (X *),
but this is not a portable assumption.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5144
dbuf_read_impl() returns (SET_ERROR(err)) when err can be 0, which adds
lots of noise in tracing logs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#4430Closes#5146
The type of "adjustmnt" was erroneously changed to unsigned when the compressed
ARC code was ported in d3c2ae1c08.
As a result of it being unsigned, the balanced metadata eviction logic
would evict all of the non-metadata.
Reviewed-by: Chris Severance <github.severach@spamgourmet.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: David Quigley <david.quigley@intel.com>
Signed-off-by: Tim Chase <tim@onlight.com>
Closes#5128Closes#5129
In order to support ABD with large blocks the spl_kmem_alloc_warn
limit needs to be increased to 64K.
A 16M block requires that pointers be stored for 4096 4K-pages
on an x86_64 system. Each of these pointers is 8 bytes requiring
an allocation of 8*4096=32,768 bytes. The addition of a small
header to this structure pushes the allocation over the default
32K warning threshold.
In addition, fix a small bug where MAX was used instead of MIN
when setting the default. This ensures a reasonable limit is
still set on systems with page sizes larger then 4K.
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#571
Enable ignore_hole_birth by default until all known hole birth bugs
have been resolved and relevant test cases added.
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4809Closes#5099
Simplify time handling in zfs_setattr by mimicking the logic in
setattr_copy from the linux kernel. In order to achieve this
in the case when ZFS' log is being replayed it is necessary
to unconditionally set the ctime in zfs_replay_setattr.
Also use the timespec_trunc function when assigning values to the
generic inode struct. This is currently a noop since zfs sets
s_time_gran to 1, however in the future rules about precision might
change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#4916
ZFS doesn't provide a custom update_time method meaning it delegates
this job to the generic VFS layer. The only time when it needs to
set the various *time values is when the inode is being marshalled
to/from the disk. Do this by moving the relevant code from
zfs_inode_update_impl to zfs_node_alloc and zfs_rezget. As a result
from this change it is no longer necessary to have multiple versions
of the zfs_inode_update function - so just nuke them and leave only
one.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Issue #227Closes#4916
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: David Quigley <david.quigley@intel.com>
This review covers the reading and writing of compressed arc headers, sharing
data between the arc_hdr_t and the arc_buf_t, and the implementation of a new
dbuf cache to keep frequently access data uncompressed.
I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs
off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block
for that DVA. The physical block may or may not be compressed. If compressed
arc is enabled and the block on-disk is compressed, then the b_pdata will match
the block on-disk and remain compressed in memory. If the block on disk is not
compressed, then neither will the b_pdata. Lastly, if compressed arc is
disabled, then b_pdata will always be an uncompressed version of the on-disk
block.
Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict
any arc_buf_t's that are no longer referenced. This means that the arc will
primarily have compressed blocks as the arc_buf_t's are considered overhead and
are always uncompressed. When a consumer reads a block we first look to see if
the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new
arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If
the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t
and bcopy the uncompressed contents from the first arc_buf_t to the new one.
Writing to the compressed arc requires that we first discard the b_pdata since
the physical block is about to be rewritten. The new data contents will be
passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we
will copy the physical block contents to a newly allocated b_pdata.
When an l2arc is inuse it will also take advantage of the b_pdata. Now the
l2arc will always write the contents of b_pdata to the l2arc. This means that
when compressed arc is enabled that the l2arc blocks are identical to those
stored in the main data pool. This provides a significant advantage since we
can leverage the bp's checksum when reading from the l2arc to determine if the
contents are valid. If the compressed arc is disabled, then we must first
transform the read block to look like the physical block in the main data pool
before comparing the checksum and determining it's valid.
OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0
Issue #5078
Several assignments to arc_c had no effect because it is ultimately
initialized to arc_c_max.
This aligns ZoL better with the upstream code which removed these
assignments some time ago.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@onlight.com>
Closes#5081
In case sav->sav_config was NULL the body of the function
would skip the iteration of the l2 cache devices and will
just cleanup the old devices. However, this wasn't very obvious
since the null check was performed after the loop body and after
the old devices were cleaned. Refactor the code so that it's now
obvious when the iteration of the l2cache devices is skipped.
This fixes the following cppcheck warning:
[module/zfs/spa.c:1552]: (error) Possible null pointer dereference: newvdevs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Closes#5087
Since they're allocated with spa_strdup(), they should be freed with
spa_strfree() so the proper length buffer is freed.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5082Closes#5086
This first phase brings over the ZFS SLM module, zfs_mod.c, to handle
auto operations in response to disk events. Disk event monitoring is
provided from libudev and generates the expected payload schema for
zfs_mod. This work leverages the recently added devid and phys_path
strings in the vdev label.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#4673
These allocations can never fail. Leaving the error handling
code here gives the impression they can so it has been removed.
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5048
perf: 2.75x faster ddt_entry_compare()
First 256bits of ddt_key_t is a block checksum, which are expected
to be close to random data. Hence, on average, comparison only needs to
look at first few bytes of the keys. To reduce number of conditional
jump instructions, the result is computed as: sign(memcmp(k1, k2)).
Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} ,
which is computed efficiently. Synthetic performance evaluation of
original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R)
CPU E5-2660 v3:
old 6.85789 s
new 2.49089 s
perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare()
Compute the result directly instead of using conditionals
perf: zfs_range_compare()
Speedup between 1.1x - 2.5x, depending on compiler version and
optimization level.
perf: spa_error_entry_compare()
`bcmp()` is not suitable for comparator use. Use `memcmp()` instead.
perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare()
perf: 2.8x faster zil_bp_compare()
perf: 2.8x faster mze_compare()
perf: faster dbuf_compare()
perf: faster compares in spa_misc
perf: 2.8x faster layout_hash_compare()
perf: 2.8x faster space_reftree_compare()
perf: libzfs: faster avl tree comparators
perf: guid_compare()
perf: dsl_deadlist_compare()
perf: perm_set_compare()
perf: 2x faster range_tree_seg_compare()
perf: faster unique_compare()
perf: faster vdev_cache _compare()
perf: faster vdev_uberblock_compare()
perf: faster fuid _compare()
perf: faster zfs_znode_hold_compare()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Richard Elling <richard.elling@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5033
`zpool get guid,freeing,leaked` shows SOURCE as `default`, it should
be `-` as those props are not editable.
Changed code to not overwrite `src` for `ZPOOL_PROP_VERSION`, so it
stays `ZPROP_SRC_NONE`. Make src const to avoid future mistakes
Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4170
zfsctl_snapdir_inactive is defined in zfs-0.6.3. In zfs-0.6.5.7
this is declaration remains even though the implementation was
removed in commit 278bee93. Removed fastreboot_disable_highpil
which is also unused.
Signed-off-by: caoxuewen cao.xuewen@zte.com.cn
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5042
From user perspective, I would expect that ZFS is always able
to remove files and directories even when the quota is exceeded.
Authored by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6940
OpenZFS-issue: https://www.illumos.org/issues/6334
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/9918916Closes#5044
For quite some time I was thinking about possibility to prefetch
ZFS indirection tables while doing sequential reads or writes.
Recent changes in predictive prefetcher made that much easier to
do. My tests on zvol with 16KB block size on 5x striped and 2x
mirrored pool of 10 disks show almost double throughput on sequential
read, and almost tripple on sequential rewrite. While for read alike
effect can be received from increasing maximal prefetch distance
(though at higher memory cost), for rewrite there is no other
solution so far.
Authored by: Alexander Motin <mav@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6322
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/cb92f413Closes#5040
Porting notes:
- Change from upstream in module/zfs/dbuf.c in 'int dbuf_read' due
to commit 5f6d0b6 'Handle block pointers with a corrupt logical size'
- Difference from upstream in module/zfs/dmu_zfetch.c,
uint32_t zfetch_max_idistance -> unsigned int zfetch_max_idistance
- Variables have been initialized at the beginning of the function
(void dmu_zfetch) to resemble the order of occurrence and account
for C99, C11 mode errors.
In dbuf_dirty(), we need to grab the dn_struct_rwlock before looking at
the db_blkptr, to prevent it from being changed by syncing context.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7086
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/98fa317Closes#5039
This fix resolves warnings reported during compiling with different gcc
optimization levels in debug mode,
Test tools:
gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC)
Linux version: 2.6.32-573.18.1.el6.x86_64, Red Hat Enterprise Linux Server release 6.1 (Santiago)
List of warnings:
CFLAGS=-O1 ./configure --enable-debug ;make
../../module/icp/core/kcf_sched.c: In function ‘kcf_aop_done’:
../../module/icp/core/kcf_sched.c:499: error: ‘fg’ may be used uninitialized in this function
../../module/icp/core/kcf_sched.c:499: note: ‘fg’ was declared here
CFLAGS=-Os ./configure --enable-debug ; make
libzfs_dataset.c: In function ‘zfs_prop_set_list’:
libzfs_dataset.c:1575: error: ‘nvl_len’ may be used uninitialized in this function
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5022
ARC will evict meta buffers that exceed the arc_meta_limit. Before a further
investigating on whether we should take special protection on meta buffers,
this tunable make arc_meta_limit adjustable for different workloads.
People can set zfs_arc_meta_limit_percent to any value while insmod zfs.ko,
so some range check is added to guarantee a suitable arc_meta_limit.
Suggested by Tim Chase, zfs_arc_dnode_limit is changed to a percent-style
tunable as well.
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4957
As is the case with traverse_prefetch_thread(), the deep stacks caused
by traversal require disabling reclaim in the send traverse thread.
Also, do the same for receive_writer_thread() in which similar problems
have been observed.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4912Closes#4998
API Change: Module parameter set/get methods take const parameter in
Grsecurity kernel v4.7.1
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Jason Zaman <jason@perfinion.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4997Closes#5001
Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).
dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:
dmu_buf_hold_noread()
dmu_buf_hold()
zap_lookup()
zap_lookup_norm()
zap_count_write()
zap_lockdir()
zap_count_write()
This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.
Sponsored by: Intel Corp.
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7004
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/109Closes#4641Closes#4972
