A preprocessor definition renders this harmless. However, it is a good
idea to change this to be consistent.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
The number of blocks that can be discarded in one BLKDISCARD ioctl on a
zvol is currently unlimited. Some applications, such as mkfs, discard
the whole volume at once and they use the maximum possible discard size
to do that. As a result, several gigabytes discard requests are not
uncommon.
Unfortunately, if a large amount of data is allocated in the zvol, ZFS
can be quite slow to process discard requests. This is especially true
if the volblocksize is low (e.g. the 8K default). As a result, very
large discard requests can take a very long time (seconds to minutes
under heavy load) to complete. This can cause a number of problems, most
notably if the zvol is accessed remotely (e.g. via iSCSI), in which case
the client has a high probability of timing out on the request.
This patch solves the issue by adding a new tunable module parameter:
zvol_max_discard_blocks. This indicates the maximum possible range, in
zvol blocks, of one discard operation. It is set by default to 16384
blocks, which appears to be a good tradeoff. Using the default
volblocksize of 8K this is equivalent to 128 MB. When using the maximum
volblocksize of 128K this is equivalent to 2 GB.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#858
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
destroying multiple snapshots
1708 adjust size of zpool history data
References:
https://www.illumos.org/issues/1644https://www.illumos.org/issues/1645https://www.illumos.org/issues/1646https://www.illumos.org/issues/1647https://www.illumos.org/issues/1708
This commit modifies the user to kernel space ioctl ABI. Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated. This change has reordered
all of the new ioctl()s to the end of the list. This should
help minimize this issue in the future.
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#826Closes#664
Added simply for convenience until this, or an equivilant, change
is merged in the upstream grub2 source.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #847
This is done for compatibility with existing Linux infrastructure.
In particular, when using zfs as a root filesystem there are init
scripts which as part of shutdown remount root read-only. Also,
the new systemd infrastructure being used by Fedora expects to be
able to remount a file system read-write.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #847
Support in-tree builtin module building.
These commits add support for compiling the ZFS module as a built-in
kernel module by copying the module code into the kernel source tree.
Here's the procedure:
- Create your kernel configuration (`.config` file) as usual. This
has to be done first so that ZFS's configure script is able to
detect kernel features correctly.
- Run `make prepare scripts` inside the kernel source tree.
- Run `./configure --enable-linux-builtin --with-linux=/usr/src/linux-...`
inside the ZFS directory.
- Run `./copy-builtin /usr/src/linux-...` inside the ZFS directory.
- In the kernel source tree, enable the `CONFIG_ZFS` option (e.g. using
`make menuconfig`). Note that this option depends on `CONFIG_SPL`
(see zfsonlinux/spl@744038069d).
- Build the kernel as usual.
ZFS module parameters can be set at boot time using the following syntax
on the kernel command line: `zfs.parameter_name=parameter_value`.
Note that you also need to rebuild the userspace tools (see
zfsonlinux/zfs@f09398cec6).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
Support in-tree builtin module building.
These commits add support for compiling the SPL module as a built-in
kernel module by copying the module code into the kernel source tree.
Here's the procedure:
- Create your kernel configuration (`.config` file) as usual. This
has to be done first so that SPL's configure script is able to
detect kernel features correctly.
- Run `make prepare scripts` inside the kernel source tree.
- Run `./configure --enable-linux-builtin --with-linux=/usr/src/linux-...`
inside the SPL directory.
- Run `./copy-builtin /usr/src/linux-...` inside the SPL directory.
- In the kernel source tree, enable the `CONFIG_SPL` option
(e.g. using `make menuconfig`).
- Build the kernel as usual.
SPL module parameters can be set at boot time using the following syntax
on the kernel command line: `spl.parameter_name=parameter_value`.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
Currently, the SPL tries to determine the hostid at module load. The
hostid is usually determined by running the userland program "hostid"
during module initialization.
Unfortunately, when the module initializes, it may be way too soon to be
able to run any userland programs. This is especially true when the
module is compiled directly inside the kernel (built-in); in that case,
the SPL would try to run hostid when the kernel is still initializing,
which of course is doomed to fail.
This patch fixes the issue by deferring hostid generation until
something actually needs the hostid (that is, when zone_get_hostid() is
called), thus switching to a "on-initialization" model to a "on-demand"
(lazy loading) model. ZFS only needs the hostid when some pool
operations are requested, and this always happens way after the kernel
has finished initialization, thus solving the problem.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
This commit introduces a "copy-builtin" script designed to prepare a
kernel source tree for building SPL as a builtin module. The script
makes a full copy of all needed files, thus making the kernel source
tree fully independent of the spl source package.
To achieve that, some compilation flags (-include, -I) have been moved
to module/Makefile. This Makefile is only used when compiling external
modules; when compiling builtin modules, a Kbuild file generated by the
configure-builtin script is used instead. This makes sure Makefiles
inside the kernel source tree does not contain references to the spl
source package.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
This patch adds a new autoconf function: SPL_LINUX_TRY_COMPILE_SYMBOL.
This new function does the following:
- Call LINUX_TRY_COMPILE with the specified parameters.
- If unsuccessful, return false.
- If successful and we're configuring with --enable-linux-builtin,
return true.
- Else, call CHECK_SYMBOL_EXPORT with the specified parameters and
return the result.
All calls to CHECK_SYMBOL_EXPORT are converted to
LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring
for builtin on a kernel which doesn't have loadable module support, or
hasn't been built yet.
The only exception are:
- AC_GET_VMALLOC_INFO, because we don't even have a public header to
include in the test case, but that's okay considering this symbol can
be ignored just fine.
- SPL_AC_DEVICE_CREATE, which is legacy API for 2.6.18 kernels. Since
kernels this old are no longer supported it should arguably just be
removed entirely from the build system.
Note that we're also checking for the correct prototype with an actual
call, which was not the case with CHECK_SYMBOL_EXPORT. However, for
"complicated" test cases like with multiple symbol versions (e.g.
vfs_fsync), we stick with the original behavior and only check for the
function's existence.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
Currently, when building a test case, we're compiling an entire Linux
module from beginning to end. This includes the MODPOST stage, which
generates a "conftest.mod.c" file with some boilerplate module
declaration code.
This poses a problem when configuring for built-in on kernels which have
loadable module support disabled. In this case conftest.mod.c is
referencing disabled code, resulting in a compilation failure, thus
breaking the tests.
This patch fixes the issue by faking the modpost stage when the
--enable-linux-builtin option is provided. It does so by forcing the
modpost command to be /bin/true, and using an empty conftest.mod.c file.
The test module still compiles fine, although the result isn't loadable,
but we don't really care at this point.
Note it is important to preserve the modpost stage when building out of
tree. This allows for the posibility of configure checks to leverage
this phase to identify GPL-only symbols.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
This patch adds a new option to configure: --enable-linux-builtin. When
this option is used, the following happens:
- Compilation of kernel modules is disabled.
- A failure to find UTS_RELEASE is followed by a suggestion to run
"make prepare" on the kernel source tree.
This patch also adds a new test which tries to compile an empty module
as a basic toolchain sanity test. If it fails and the option was
specified, the error is followed by a suggestion to run "make scripts"
on the kernel source tree.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
Commit 3160d4f56b changed the set of
conditions under which spl_mutex_spin_max would be implemented as a
function by changing an #if in sys/mutex.h. The corresponding
implementation file spl-mutex.c, however, has not been updated to
reflect the change. This results in undefined reference errors on
spl_mutex_spin_max under the following condition:
((!CONFIG_SMP || CONFIG_DEBUG_MUTEXES) && HAVE_MUTEX_OWNER && HAVE_TASK_CURR)
This patch fixes the issue by using the same #if in sys/mutex.h and
spl-mutex.c.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
Currently, when configure --with-config is used, selective compilation
is only effective for the simple "make" case. Package builders (e.g.
make rpm) still build everything (utils and modules). This patch fixes
that.
This patch also drops the duplicate rpm-modules build target.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Issue zfsonlinux/zfs#851
In zfs, each module Makefile contains a MODULE variable which contains
the name of the module, and the following declarations reference this
variable.
In spl, there is a MODULES variable which is never used. Rename it to
MODULE and use it like in zfs. This improves consistency between the two
build systems.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#851
When libzfs checks if the module is loaded or not, it currently reads
/proc/modules and searches for a line matching the module name.
Unfortunately, if the module is included in the kernel itself (built-in
module), then /proc/modules won't list it, so libzfs will wrongly conclude
that the module is not loaded, thus making all ZFS userspace tools unusable.
Fortunately, all loaded modules appear as directories in /sys/module, even
built-in ones. Thus we can use /sys/module in lieu of /proc/modules to fix
the issue.
As a bonus, the code for checking becomes much simpler.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
This commit introduces a "copy-builtin" script designed to prepare a
kernel source tree for building ZFS as a builtin module. The script
makes a full copy of all needed files, thus making the kernel source
tree fully independent of the zfs source package.
To achieve that, some compilation flags (-include, -I) have been moved
to module/Makefile. This Makefile is only used when compiling external
modules; when compiling builtin modules, a Kbuild file generated by the
configure-builtin script is used instead. This makes sure Makefiles
inside the kernel source tree does not contain references to the zfs
source package.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL.
This new function does the following:
- Call LINUX_TRY_COMPILE with the specified parameters.
- If unsuccessful, return false.
- If successful and we're configuring with --enable-linux-builtin,
return true.
- Else, call CHECK_SYMBOL_EXPORT with the specified parameters and
return the result.
All calls to CHECK_SYMBOL_EXPORT are converted to
LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring
for builtin on a kernel which doesn't have loadable module support, or
hasn't been built yet.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
Currently, when building a test case, we're compiling an entire Linux
module from beginning to end. This includes the MODPOST stage, which
generates a "conftest.mod.c" file with some boilerplate module
declaration code.
This poses a problem when configuring for built-in on kernels which have
loadable module support disabled. In this case conftest.mod.c is
referencing disabled code, resulting in a compilation failure, thus
breaking the tests.
This patch fixes the issue by faking the modpost stage when the
--enable-linux-builtin option is provided. It does so by forcing the
modpost command to be /bin/true, and using an empty conftest.mod.c file.
The test module still compiles fine, although the result isn't loadable,
but we don't really care at this point.
Note it is important to preserve the modpost stage when building out of
tree. The ZFS_AC_KERNEL_BLK_END_REQUEST, ZFS_AC_KERNEL_BLK_QUEUE_FLUSH,
and ZFS_AC_KERNEL_BLK_RQ_BYTES configure checks all depend on it to
identify GPL-only symbols.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
This patch adds a new option to configure: --enable-linux-builtin. When
this option is used, the following happens:
- Compilation of kernel modules is disabled.
- A failure to find UTS_RELEASE is followed by a suggestion to run
"make prepare" on the kernel source tree.
This patch also adds a new test which tries to compile an empty module
as a basic toolchain sanity test. If it fails and the option was
specified, the error is followed by a suggestion to run "make scripts"
on the kernel source tree.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
Currently, when configure --with-config is used, selective compilation
is only effective for the simple "make" case. Package builders (e.g.
make rpm) still build everything (utils and modules). This patch fixes
that.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict(). This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.
However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics. This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#784
The vmtruncate_range() support has been removed from the kernel in
favor of using the fallocate method in the file_operations table.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
The export_operations member ->encode_fh() has been updated to
take both the child and parent inodes. This interface used to
take the child dentry and a bool describing if the parent is needed.
NOTE: While updating this code I noticed that we do not currently
cleanly handle the case where we're passed a connectable parent.
This code should be audited to make sure we're doing the right thing.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
Support for PaX/GRSecurity patched kernels was developed against Linux
3.2. Unfortunately, an autotools check introduced for a Linux 3.3 API
fails on PaX/GRSecurity patched kernels. This causes the module to be
built against the Linux 3.2 ABI, which results in a NULL pointer
dereference at runtime.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Closes#794Closes#809
The .zfs control directory implementation currently relies on
the fact that there is a direct 1:1 mapping from an object id
to its inode number. This works well as long as the system
uses a 64-bit value to store the inode number.
Unfortunately, the Linux kernel defines the inode number as
an 'unsigned long' type. This means that for 32-bit systems
will only have 32-bit inode numbers but we still have 64-bit
object ids.
This problem is particularly acute for the .zfs directories
which leverage those upper 32-bits. This is done to avoid
conflicting with object ids which are allocated monotonically
starting from 0. This is likely to also be a problem for
datasets on 32-bit systems with more than ~2 billion files.
The right long term fix must remove the simple 1:1 mapping.
Until that's done the only safe thing to do is to disable the
.zfs directory on 32-bit systems.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Explicitly cast the sizeof in hostid_read() to prevent the
following compiler warning on 32-bit systems.
module/spl/spl-generic.c:490:10: error: format '%lu' expects
argument of type 'long unsigned int', but argument 4 has type
'unsigned int' [-Werror=format]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add the missing error handling to ddt_object_load(). There's no
good reason this needs to be fatal. It is preferable that an
error be returned. This will allow 'zpool import -FX' to safely
attempt to rollback through previous txgs looking for a good one.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The '__attribute__((always_inline))' does not strictly imply
'inline'. Newer versions of gcc detect this misuse and issue
the following warning. Including the missing 'inline' resolves
the build warning.
./module/zfs/dsl_scan.c:758:1:error: always_inline function
might not be inlinable [-Werror=attributes]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Gentoo Hardened kernels include the PaX/GRSecurity patches. They use a
dialect of C that relies on a GCC plugin. In particular, struct
file_operations has been marked do_const in the PaX/GRSecurity dialect,
which causes GCC to consider all instances of it as const. This caused
failures in the autotools checks and the ZFS source code.
To address this, we modify the autotools checks to take into account
differences between the PaX C dialect and the regular C dialect. We also
modify struct zfs_acl's z_ops member to be a pointer to a function
pointer table. Lastly, we modify zpl_put_link() to address a PaX change
to the function prototype of nd_get_link(). This avoids compiler errors
in the PaX/GRSecurity dialect.
Note that the change in zpl_put_link() causes a warning that becomes a
build failure when debugging is enabled. Fixing that warning requires
ryao/spl@5ca50ef459.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#484
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.
This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.
Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.
This change also depends on API changes which are available in 2.6.37
and latter kernels. The build system has been updated to detect this,
but there is no compatibility mode for older kernels. This means that
online expansion will NOT be available in older kernels. However, it
will still be possible to expand the vdev offline.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#808
The spl_rwsem_is_locked() compatibility function has been observed
to be a hot spot. The root cause of this is that we must check the
rwsem activity under the rwsem->wait_lock to avoid a race. When
the lock is busy significant contention can occur.
The upstream kernel fix for this race had the insight that by using
spin_trylock_irqsave() this contention could be avoided. When the
lock is contended it's reasonable to return that it is locked.
This change updates the SPLs implemention to be like the upstream
kernel. Since the kernel code has been in use for years now this
a low risk change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Previously, the zfs.release file was created at 'make install' time.
This is slightly problematic when the file is needed without running
'make install'. Because of this, the step creating the file was removed
from 'make install' and replaced with a more appropriate zfs.release.in
file.
As a result, the zfs.release file will now be created earlier as part
of the 'configure' step as opposed to the 'make install' step.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Previously, the spl.release file was created at 'make install' time.
This is slightly problematic when the file is needed without running
'make install'. Because of this, the step creating the file was removed
from 'make install' and replaced with a more appropriate spl.release.in
file.
As a result, the spl.release file will now be created earlier as part
of the 'configure' step as opposed to the 'make install' step.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#135
This code was was inherited from Solaris which was careful to define
the expected VTOC for various supported architectures. While this
check may have made sense there it's something we should be able to
safely drop under Linux.
However, I'm not quite ready to do that yet. So for the moment I'm
just doing the very safe thing of adding PowerPC as a supported type.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Commit e5dc681a changed EFI_NUMPAR from 9 to 128. This means that the
on-disk EFI label has efi_nparts = 128 instead of 9. The index of the
reserved partition, however, is still 8. This breaks
efi_use_whole_disk(), which uses efi_nparts-1 as the index of the
reserved partition.
This commit fixes efi_use_whole_disk() when the index of the reserved
partition is not efi_nparts-1. It rewrites the algorithm and makes it
more robust by using the order of the partitions instead of their
numbering. It assumes that the last non-empty partition is the reserved
partition, and that the non-empty partition before that is the data
partition.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #808
Currently, zpool_vdev_online() calls zpool_relabel_disk() with a short
partition device name, which is obviously wrong because (1)
zpool_relabel_disk() expects a full, absolute path to use with open()
and (2) efi_write() must be called on an opened disk device, not a
partition device.
With this patch, zpool_relabel_disk() gets called with a full disk
device path. The path is determined using the same algorithm as
zpool_find_vdev().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #808
The error handling code around zpool_relabel_disk() is either inexistent
or wrong. The function call itself is not checked, and
zpool_relabel_disk() is generating error messages from an unitialized
buffer.
Before:
# zpool online -e homez sdb; echo $?
`: cannot relabel 'sdb1': unable to open device: 2
0
After:
# zpool online -e homez sdb; echo $?
cannot expand sdb: cannot relabel 'sdb1': unable to open device: 2
1
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #808
1949 crash during reguid causes stale config
1953 allow and unallow missing from zpool history since removal of pyzfs
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Approved by: Eric Schrock <eric.schrock@delphix.com>
References:
https://www.illumos.org/issues/1949https://www.illumos.org/issues/1953
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#665
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/1748
This commit modifies the user to kernel space ioctl ABI. Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated. If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#665
zfsonlinux/spl@2092cf68d8 used
PF_MEMALLOC to workaround a bug in the Linux kernel where
allocations did not honor the gfp flags passed to vmalloc().
Unfortunately, PF_MEMALLOC has the side effect of permitting
allocations to allocate pages outside of ZONE_NORMAL. This
has been observed to result in the depletion of ZONE_DMA32.
A kernel patch is available in the Gentoo bug tracker for
this issue.
https://bugs.gentoo.org/show_bug.cgi?id=416685
This negates any benefit PF_MEMALLOC provides, so we introduce
an autotools check to disable the use of PF_MEMALLOC on
systems with patched kernels.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#126
As the Gentoo sys-fs/zfs maintainer, I receive license compatibility
questions and at times, those questions can be harassing. I feel that
the presence of the GPL in Gentoo's package metadata promotes such
questions. zfs.gentoo.in is the only GPLv2 licensed file in ZFS, so I
have taken the liberty of contacting all contributors to this file to
request permission to relicense it.
All of the contributors to this file have agreed to relicense it under
the 2-clause BSD license. I have added their Signed-offs to this commit,
in order of first contribution. Thank you everyone for being so
understanding.
Signed-off-by: devsk <devsku@gmail.com>
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Tselischev <andrewtselischev@gmail.com>
Signed-off-by: Zachary Bedell <zac@thebedells.org>
Signed-off-by: Gunnar Beutner <gunnar@beutner.name>
Signed-off-by: Kyle Fuller <inbox@kylefuller.co.uk>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Closes#819
The lack of the ULL suffix causes warnings such as the following on
32-bit systems:
In function 'zfsctl_is_snapdir':
zfs-0.6.0//module/zfs/zfs_ctldir.c:151: warning: integer constant
is too large for 'long' type
We add the ULL suffix to fix that.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#813
This prevents warnings in ZFS that were caused by changes necessary to
support PaX patched kernels. When debugging is enabled, these warnings
become build failures.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#131
When the ddt_zap_lookup() function was updated to dynamically
allocate memory for the cbuf variable, to save stack space, the
'csize <= sizeof (cbuf)' assertion was not updated. The result
of this was that the size of the pointer was being used in the
comparison rather than the buffer size.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
The Chaos 4.x distribution is based on RHEL 5.x which is no longer
supported by ZoL since it uses a 2.6.18 kernel.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The Chaos 4.x distribution is based on RHEL 5.x which is no longer
supported by ZoL since it uses a 2.6.18 kernel.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This commit adds support for building debug and debug-devel sub packages
of the zfs-modules main package. This is to allow building packages
which are built against a debug kernel. By default, only packages are
built against a regular non-debug kernel. This can be toggled by passing
the '--with kernel-debug' parameter to rpmbuild.
Examples:
# To build packages against only the non-debug kernel
$ rpmbuild --rebuild --with kernel --without kernel-debug $SRPM
# To build packages against only the debug kernel
$ rpmbuild --rebuild --without kernel --with kernel-debug $SRPM
# To build packages against debug and non-debug kernel
$ rpmbuild --rebuild --with kernel --with kernel-debug $SRPM
Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported
for building the debug and debug-devel packages.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This commit adds support for building debug and debug-devel sub packages
of the spl-modules main package. This is to allow building packages
which are built against a debug kernel. By default, only packages are
built against a regular non-debug kernel. This can be toggled by passing
the '--with kernel-debug' parameter to rpmbuild.
Examples:
# To build packages against only the non-debug kernel
$ rpmbuild --rebuild --with kernel --without kernel-debug $SRPM
# To build packages against only the debug kernel
$ rpmbuild --rebuild --without kernel --with kernel-debug $SRPM
# To build packages against debug and non-debug kernel
$ rpmbuild --rebuild --with kernel --with kernel-debug $SRPM
Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported
for building the debug and debug-devel packages.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #115
Usage of get_current() is not supported across all architectures.
The correct interface to use is the '#define current' which will
map to the appropriate function, usually current_thread_info().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#119
