Increase the Linux-Maximum version in the META file to 5.13.
All of the required compatibility patches have been merged
and the 5.13 kernel has been officially released.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The number of sublists in a multilist is relatively small. We dont need
64 bits to calculate an index. 32 bits is sufficient and makes the
code more efficient.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12288
plymouth --command splits the command on spaces which means
that zfs-load-key was getting the filesystem name enclosed
in single quotes (since 13c59bb76) and failing. This commit
fixes it by piping the password directly to the command
similar to how it's done in other scripts (initramfs,
dracut without plymouth).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Michal Vasilek <michal@vasilek.cz>
Related-to: #9193
Related-to: #9202Closes#12147
The stock zstd code expects some helpers from ASAN if present.
This works fine in userland, but in kernel, KASAN also gets detected,
and lacks those helpers. So let's make some empty substitutes for
that case.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12232
While abd_verify() does nothing when built without debug, compiler
can't optimize it out by itself due to calls to external list_*()
and abd_verify_scatter(). This commit makes it explicit.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12280
Unlike most other properties the 'compatibility' property is stored
in the pool config object and not the DMU_OT_POOL_PROPS object.
This had the advantage that the compatibility information is available
without needing to fully import the pool (it can be read with zdb).
However, this means we need to make sure to update both the copy of
the config in the MOS and the cache file. This wasn't being done.
This commit adds a call to spa_async_request() to ensure the copy of
the config in the cache file gets updated as well as the one stored
in the pool. This same change is made for the 'comment' property
which suffers from the same inconsistency.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Colm Buckley <colm@tuatha.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12261Closes#12276
A couple flags weren't being copied in the case where we're doing size
estimation on a resume.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes: #12266
The receive-o-x_props_override test case reliably fails on the
FreeBSD main builders (but not on Linux), until the root cause is
understood add this test to the FreeBSD exception list.
On Linux the alloc_class_012_pos test case may occasionally fail.
This is a known false positive which has also been added to the
Linux exception list until the test can be made entirely reliable.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12272
ZFS loves using %llu for uint64_t, but that requires a cast to not
be noisy - which is even done in many, though not all, places.
Also a couple places used %u for uint64_t, which were promoted
to %llu.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12233
This reverts commit 13fac09868.
Per the discussion in #11531, the reverted commit---which intended only
to be a cleanup commit---introduced a subtle, unintended change in
behavior.
Care was taken to partially revert and then reapply 10b3c7f5e4
which would otherwise have caused a conflict. These changes were
squashed in to this commit.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Suggested-by: @chrisrd
Suggested-by: robn@despairlabs.com
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#11531Closes#12227
wmsum was designed exactly for cases like these with many updates
and rare reads. It allows to completely avoid atomic operations on
congested global variables.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12172
This replaces the generic libspl atomic.c atomics implementation
with one based on builtin gcc atomics. This functionality was added
as an experimental feature in gcc 4.4. Today even CentOS 7 ships
with gcc 4.8 as the default compiler we can make this the default.
Furthermore, the builtin atomics are as good or better than our
hand-rolled implementation so it's reasonable to drop that custom code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11904Closes#12252Closes#12244
In case we have I/O and try to remove an L2ARC device a deadlock might
occur. arc_read()->zio_read()->zfs_blkptr_verify() waits for SCL_VDEV
to be dropped while holding the hash_lock. However, spa_l2cache_load()
holds SCL_ALL and waits for the hash_lock in l2arc_evict().
Fix this by moving zfs_blkptr_verify() to the top top arc_read() before
the hash_lock is taken. Verify the block pointer and return a checksum
error if damaged rather than halting the system, by using
BLK_VERIFY_LOG instead of BLK_VERIFY_HALT.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#12054
Turns out $ZPOOL_IMPORT_OPTS expands in a shell-like fashion,
yielding 'import' '-aN' '-o' 'cachefile=none' for an unset variable,
and 'import' '-aN' '-o' 'cachefile=none' 'word1' 'word2' for a
white-spaced one, but ${ZPOOL_IMPORT_OPTS} expands like "${Z_I_O}"
would in a shell, yielding 'import' '-aN' '-o' 'cachefile=none' ''
(empty) and 'import' '-aN' '-o' 'cachefile=none' 'word1 word2' (spaced)
Fixes eec5ba113e "dracut: 90zfs: respect
zfs_force=1 on systemd systems"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes: #12231
vdev_draid_min_asize() returns the minimum size of a child vdev. This
is used when determining if a disk is big enough to replace a child.
It's also used by zdb to determine how big of a child to make to test
replacement.
vdev_draid_min_asize() says that the child’s asize has to be at least
1/Nth of the entire draid’s asize, which is the same logic as raidz.
However, this contradicts the code in vdev_draid_open(), which
calculates the draid’s asize based on a reduced child size:
An additional 32MB of scratch space is reserved at the end of each
child for use by the dRAID expansion feature
So the problem is that you can replace a draid disk with one that’s
vdev_draid_min_asize(), but it actually needs to be larger to accommodate
the additional 32MB. The replacement is allowed and everything works at
first (since the reserved space is at the end, and we don’t try to use
it yet), but when you try to close and reopen the pool,
vdev_draid_open() calculates a smaller asize for the draid, because of
the smaller leaf, which is not allowed.
I think the confusion is that vdev_draid_min_asize() is correctly
returning the amount of required *allocatable* space in a leaf, but the
actual *size* of the leaf needs to be at least 32MB more than that.
ztest_vdev_attach_detach() assumes that it can attach that size of
device, and it actually can (the kernel/libzpool accepts it), but it
then later causes zdb to not be able to open the pool.
This commit changes vdev_draid_min_asize() to return the required size
of the leaf, not the size that draid will make available to the metaslab
allocator.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#11459Closes#12221
In zfs_znode_alloc we always hash inodes. If the
znode is unlinked, we do not need to hash it. This
fixes the problem where zfs_suspend_fs is doing zrele
(iput) in an async fashion, and zfs_resume_fs unlinked
drain processing will try to hash an inode that could
still be hashed, resulting in a panic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alan Somers <asomers@gmail.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9741Closes#11223Closes#11648Closes#12210
Having an old enough version of "file" and no "uncompress" program
installed can cause rpmbuild as root to crash and mangle rpmdb.
So let's add a build dependency for RPM-based systems.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes: #12071Closes: #12168
Commit 86b5f4c12 added a new zfs_clone_livelist_dedup.ksh test case
but didn't include it in the Makefile.am. This results in the test
not being included in the dist tarball so it's never run by the CI.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #12224
This commit partially reverts changes to multilists in PR 7968
(multi-threaded spa-sync()) and adds some cache line alignments to
separate read-only multilists and heavily modified refcount's to
different cache lines.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-by: iXsystems, Inc.
Closes#12158
This mostly reverts "3537 want pool io kstats" commit of 8 years ago.
From one side this code using pool-wide locks became pretty bad for
performance, creating significant lock contention in I/O pipeline.
From another, there are more efficient ways now to obtain detailed
statistics, while this statistics is illumos-specific and much less
usable on Linux and FreeBSD, reported only via procfs/sysctls.
This commit does not remove KSTAT_TYPE_IO implementation, that may
be removed later together with already unused KSTAT_TYPE_INTR and
KSTAT_TYPE_TIMER.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12212
The prevailing style is to use either nothing, or the originating
organisational umbrella (here: OpenZFS), and these aren't Linux manpages
This also deduplicates the substitution code, and makes adding/removing
sexions simpler in future
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12212
The first warning of a misspelling is a false positive, so we annotate
the script accordingly. As for the x-prefix warnings update the check
to use the conventional '[ -z <string> ]' syntax.
all-syslog.sh:46:47: warning: Possible misspelling: ZEVENT_ZIO_OBJECT
may not be assigned, but ZEVENT_ZIO_OBJSET is. [SC2153]
make_gitrev.sh:53:6: note: Avoid x-prefix in comparisons as it no
longer serves a purpose [SC2268]
man-dates.sh:10:7: note: Avoid x-prefix in comparisons as it no
longer serves a purpose [SC2268]
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12208
This:
(a) improves the error log message,
(b) locks per pool instead of globally,
(c) locks the actual output file instead of /var/lock/zfs-list,
which would otherwise linger there forever (well, still will,
but you can remove it and it won't come back), and
(d) preserves attributes of the output file
instead of reverting them to 0:0 644
It is imperative that the previous commit
("zed-functions.sh: zed_lock(): don't truncate lock")
be included in any series that contains this one
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12042
By locking the log file itself, we can omit arduous rebinding and
explicit umask setting, but, perhaps more importantly, avoid permanently
littering /var/lock/ with zed.debug.log.lock we will never delete
It is imperative that the previous commit
("zed-functions.sh: zed_lock(): don't truncate lock")
be included in any series that contains this one
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12042
By appending instead of truncating, we can lock on any file (with write
permissions) instead of only dedicated lock files, since the locking
process itself no longer alters the file in any way
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12042
`getfsstat(2)` is used to retrieve the list of mounted file systems,
which libzfs uses when fetching properties like mountpoint, atime,
setuid, etc. The `mode` parameter may be `MNT_NOWAIT`, which uses
information in the VFS's cache, or `MNT_WAIT`, which effectively does a
`statfs` on every single mounted file system in order to fetch the most
up-to-date information. As far as I can tell, the only fields that
libzfs cares about are the filesystem's name, mountpoint, fstypename,
and mount flags. Those things are always updated on mount and unmount,
so they will always be accurate in the VFS's mount cache except in two
circumstances:
1) When a file system is busy unmounting
2) When a ZFS file system changes the value of a mount-overridable
property like atime or setuid, but doesn't remount the file system.
Right now that only happens when the property is changed by an
unprivileged user who has delegated authority to change the property
but not to mount the dataset. But perhaps libzfs could choose to do
it for other reasons in the future.
Switching to `MNT_NOWAIT` will greatly improve speed with no downside,
as long as we explicitly update the mount cache whenever we change a
mount-overridable property.
For comparison, Illumos gets this information using the native
`getmntany` and `getmntent` functions, which also use cached
information. The illumos function that would refresh the cache,
`resetmnttab`, is never called by libzfs.
And on GNU/Linux, `getmntany` and `getmntent` don't even communicate
with the kernel directly. They simply parse the file they are given,
which is usually /etc/mtab or /proc/mounts. Perhaps the implementation
of /proc/mounts is synchronous, ala MNT_WAIT; I don't know.
Sponsored-by: Axcient
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes: #12091
There's already logic to force INVARIANTS on for building if it's
present in the running kernel; however, not having DEBUG enabled
when DEBUG and INVARIANTS are can cause strange panics.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12185Closes#12163
Update the logic to handle the dedup-case of consecutive
FREEs in the livelist code. The logic still ensures that
all the FREE entries are matched up with a respective
ALLOC by keeping a refcount for each FREE blkptr that we
encounter and ensuring that this refcount gets to zero
by the time we are done processing the livelist.
zdb -y no longer panics when encountering double frees
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#11480Closes#12177
- Avoid atomic_add() when updating as_lower_bound/as_upper_bound.
Previous code was excessively strong on 64bit systems while not
strong enough on 32bit ones. Instead introduce and use real
atomic_load() and atomic_store() operations, just an assignments
on 64bit machines, but using proper atomics on 32bit ones to avoid
torn reads/writes.
- Reduce number of buckets on large systems. Extra buckets not as
much improve add speed, as hurt reads. Unlike wmsum for aggsum
reads are still important.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12145
SUSE stores the library at /lib64/libgcc_s.so.1 (/lib/libgcc_s.so.1 for
i686 glibc), which is in the search path
Also relax the /usr/lib path to catch systems similar to SUSE
(/usr/lib64/gcc/x86_64-suse-linux/10/libgcc_s.so) but without
the top-level lib64
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11750Closes#12108
In the current world, `zfs diff` will die on certain kinds of errors
that come up on ordinary, not-mangled filesystems - like EINVAL,
which can come from a file with multiple hardlinks having the one
whose name is referenced deleted.
Since it should always be safe to continue, let's relax about all
error codes - still print something for most, but don't immediately
abort when we encounter them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12072
VFS_QUOTACTL(9) has been updated to allow each filesystem to indicate
whether it has changed the busy state of the mount. The filesystem
may still assume that its .vfs_quotactl entrypoint is always called
with the mount busied, but only needs to unbusy the mount (and clear
*mp_busy) if it does something that actually requires the mount to be
unbusied. It no longer needs to blindly copy-paste the UFS protocol
for calling vfs_unbusy(9) for the Q_QUOTAOFF and Q_QUOTAON commands.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jason Harmening <jason.harmening@gmail.com>
Closes#12052
Move check for errors from mbrtowc() into the loop. The error values
are not actually negative, so we don't break out of the loop when they
are encountered.
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#12175Closes#12176
For small objects the kernel's slab implementation is very fast and
space efficient. However, as the allocation size increases to
require multiple pages performance suffers. The SPL kmem cache
allocator was designed to better handle these large allocation
sizes. Therefore, on Linux the kmem_cache_* compatibility wrappers
prefer to use the kernel's slab allocator for small objects and
the custom SPL kmem cache allocator for larger objects.
This logic was effectively disabled for all architectures using
a non-4K page size which caused all kmem caches to only use the
SPL implementation. Functionally this is fine, but the SPL code
which calculates the target number of objects per-slab does not
take in to account that __vmalloc() always returns page-aligned
memory. This can result in a massive amount of wasted space when
allocating tiny objects on a platform using large pages (64k).
To resolve this issue we set the spl_kmem_cache_slab_limit cutoff
to 16K for all architectures.
This particular change does not attempt to update the logic used
to calculate the optimal number of pages per slab. This remains
an issue which should be addressed in a future change.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12152Closes#11429Closes#11574Closes#12150
In `zpool_load_compat()`:
* initialize `l_features[]` with a loop rather than a static
initializer.
* don't redefine system constants; use private names instead
Rationale here:
When an array is initialized using a static {foo}, only the specified
members are initialized to the provided values, the rest are
initialized to zero. While B_FALSE is of course zero, it feels
unsafe to rely on this being true forever, so I'm inclined to sacrifice
a few microseconds of runtime here and initialize using a loop.
When looking for the correct combination of system constants to use
(in open() and mmap()), I prefer to use private constants rather than
redefining system ones; due to the small chance that the system
ones might be referenced later in the file. So rather than defining
O_PATH and MAP_POPULATE, I use distinct constant names.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes#12156
zfs_arc_overflow_shift was never a parameter:
ca0bf58d65 ("Illumos 5497 - lock
contention on arcs_mtx") is the only result in
git log -Soverflow_shift, and it wasn't exposed then, nor is it now
zfs_read_chunk_size was renamed to zfs_vnops_read_chunk_size in
e53d678d4a ("Share zfs_fsync, zfs_read,
zfs_write, et al between Linux and FreeBSD")
zio_decompress_fail_fraction was never a parameter: it was added in
c3bd3fb4ac ("OpenZFS 9403 - assertion
failed in arc_buf_destroy()") as a developer aid for setting in zdb, but
it's a dangerous test tunable and has no place in public documentation,
(not to mention that it obviously doesn't work):
> Although this did uncover a few low priority issues, this
unfortuantely also causes ztest to ASSERT in many locations where the
code is working correctly since it is designed to fail on IO errors.
Developers can manually set this variable with the '-o' option to find
and debug issues.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12157
It turns out that sometimes, evidently only when run inside the
ZTS handler, arc_summary3 | head > /dev/null will die with ENOTCONN,
and ruin the test run.
Added handling for that.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12160
There used to be a warning after upgrading a zpool in FreeBSD, so users
won't forget to update the boot loader that pool is booted from.
This change brings this warning back, but only if the bootfs property
is set on the pool, which should be sufficient for the vast majority of
FreeBSD installations. People running something custom are most likely
aware of what to do after an upgrade in their specific environment.
Functionality is implemented in an OS specific helper function.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Michael Gmelin <grembo@FreeBSD.org>
Signed-off-by: Michael Gmelin <grembo@FreeBSD.org>
Closes#12099Closes#12104
The additional iter advance is incorrect, as copy_from_iter() has
already done the right thing. This will result in the following
warning being printed to the console as of the 5.12 kernel.
Attempted to advance past end of bvec iter
This change should have been included with #11378 when a
similar change was made on the read side.
Suggested-by: @siebenmann
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Issue #11378Closes#12041Closes#12155
make_gitrev.sh actually breaks checkbashisms' parser,
which /insists/ that the end-of-line " is actually a string start
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12101
This checks every file it checked (and a few more),
but explicitly instead of "if it works it works" best-effort
(which wasn't that good anyway)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#10512Closes#12101
Accidentally introduced by commit dd00925e8d.
Force-install the zstreamdump link, this is a supported configuration
and the install should not fail if it needs to overwrite an existing
file.
Also cd to work around some funny platforms as noted in AC_PROG_LN_S doc
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12143
Also rip out the section about potentially including in the OpenZFS
distribution and simplify -e description
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12125
I fixed a few typos, but avoided changing anything beyond that;
the sould of the document should be preserved
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12125
This change introduces long options for ztest. It builds the usage
message as well as the long_options array from a single table. It also
adds #defines for the default values.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Manoj Joseph <manoj.joseph@delphix.com>
Closes#12117
While Libera doesn't yet have a webchat client, we should at least
direct them to the right network. Once a webchat client is available,
we can direct them to it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12127
wmsum counters are a reduced version of aggsum counters, optimized for
write-mostly scenarios. They do not provide optimized read functions,
but instead allow much cheaper add function. The primary usage is
infrequently read statistic counters, not requiring exact precision.
The Linux implementation is directly mapped into percpu_counter KPI.
The FreeBSD implementation is directly mapped into counter(9) KPI.
In user-space due to lack of better implementation mapped to aggsum.
Unfortunately neither Linux percpu_counter nor FreeBSD counter(9)
provide sufficient functionality to completelly replace aggsum, so
it still remains to be used for several hot counters.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12114
Previously, ZFS scaled maxinflight_bytes based on total number of
disks in the pool. A 3-wide mirror was receiving a queue depth of 3
disks, which it should not, since it reads from all the disks inside.
For wide raidz the situation was slightly better, but still a 3-wide
raidz1 received a depth of 3 disks instead of 2.
The new code counts only unique data disks, i.e. 1 disk for mirrors
and non-parity disks for raidz/draid. For draid the math is still
imperfect, since vdev_get_nparity() returns number of parity disks
per group, not per vdev, but still some better than it was.
This should slightly reduce scrub influence on payload for some pool
topologies by avoiding excessive queuing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closing #12046
A plain rewrite of the shell version, and generates identical
units, save for replacing some empty lines with nothing, having fewer
meaningless spaces in After=s and different spacing in the lock scripts,
for a clean git diff -w
This is a gain of anywhere from 0m0.336s vs 0m0.022s (15.27x)
to 0m0.202s vs 0m0.006s (33.67x), depending on the hardware,
a.k.a. from "absolutely unusable" to "perfectly fine"
This also properly deals with canmount=noauto units across multiple
pools
See PR for detailed timings (of an early version) and diffs
Reviewed-by: Antonio Russo <aerusso@aerusso.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: InsanePrawn <insane.prawny@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #11915Closes#11917
zstreamdump(8) was in quite a bad state,
and the wrapper didn't work if invoked without /sbin in $PATH
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12015
This produces a leaner image, doesn't fail if zdb doesn't exist,
properly handles hostnameless systems, doesn't mention crypto modules
for no reason, doesn't add useless empty executable in hopes an
eight-year-old PR is merged, uses i-t builtins for all copies
Also optimize the checkbashisms filter to spawn one (or a few) awks
instead of one per regular file and remove initramfs/hooks therefrom due
to a command -v false positive
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12017
configure on s390x has a key check fail with an error about
a variable being used uninitialized. So let's initialize it.
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12126
Just like #12087, the set_acl signature changed with all the bolted-on
*userns parameters, which disabled set_acl usage, and caused #12076.
Turn zpl_set_acl into zpl_set_acl and zpl_set_acl_impl, and add a
new configure test for the new version.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12076Closes#12093
Linux man-pages' mount(8) points at fcntl(2), as does mount(2),
and support for it is little-used, deprecated, and configurable
since 4.5.
As far as I can tell, FreeBSD doesn't support nbmand at all ‒
mandatory locks are mostly dead
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#12111
Previous commit added accounting for geom mode, but not for dev.
In geom mode we actually have GEOM statistics, while in dev mode
additional accounting actually makes more sense.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes#12097
ZFS does not expect transient errors from crypto. For read they are
counted as checksum errors, while for write end up in panic. To not
panic on random low memory conditions retry ENOMEM errors in the OCF
wrapper function.
While there remove unneeded timeout and priority from msleep().
External-issue: https://reviews.freebsd.org/D30339
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#12077
I looked for a bit, and couldn't find any documentation on
how to print all logged dbgmsg entries, just messages since
the DTrace probe started, until @allanjude kindly pointed me
toward the sysctl.
So let's add that note where the DTrace probe is mentioned for
FreeBSD, so other people can find it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12113
Linux changed the tmpfile() signature again in torvalds/linux@6521f89,
which in turn broke our HAVE_TMPFILE detection in configure.
Update that macro to include the new case, and change the signature of
zpl_tmpfile as appropriate.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes: #12060Closes: #12087
This change addresses two distinct scenarios which are possible
when performing a sequential resilver to a dRAID pool with vdevs
that contain silent unknown damage. Which in this circumstance
took the form of the devices being intentionally overwritten with
zeros. However, it could also result from a device returning incorrect
data while a sequential resilver was in progress.
Scenario 1) A sequential resilver is performed while all of the
dRAID vdevs are ONLINE and there is silent damage present on the
vdev being resilvered. In this case, nothing will be repaired
by vdev_raidz_io_done_reconstruct_known_missing() because
rc->rc_error isn't set on any of the raid columns. To address
this vdev_draid_io_start_read() has been updated to always mark
the resilvering column as ESTALE for sequential resilver IO.
Scenario 2) Multiple columns contain silent damage for the same
block and a sequential resilver is performed. In this case it's
impossible to generate the correct data from parity unless all of
the damaged columns are being sequentially resilvered (and thus
only good data is used to generate parity). This is as expected
and there's nothing which can be done about it. However, we need
to be careful not to make to situation worse. Since we can't
verify the data is actually good without a checksum, we must
only repair the devices which are being sequentially resilvered.
Otherwise, an incorrect repair to a device which previously
contained good data could effectively lock in the damage and
make reconstruction impossible. A check for this was added to
vdev_raidz_io_done_verified() along with a new test case.
Lastly, this change updates the redundancy_draid_spare1 and
redundancy_draid_spare3 test cases to be more representative
of normal dRAID replacement operation. Specifically, what we
care about is that the scrub run after a sequential resilver
does not find additional blocks which need repair. This would
indicate the sequential resilver failed to rebuild a section of
one of the devices. Note also the tests were switched to using
the verify_pool() function which still checks for checksum errors.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12061
While use of dynamic taskqs allows to reduce number of idle threads,
hardcoded 8 taskqs of each kind is a big overkill for small systems,
complicating CPU scheduling, increasing I/O reorder, etc, while
providing no real locking benefits, just not needed there.
On another side, 12*8 worker threads per kind are able to overload
almost any system nowadays. For example, pool of several fast SSDs
with SHA256 checksum makes system barely responsive during scrub, or
with dedup enabled barely responsive during large file deletion.
To address both problems this patch introduces ZTI_SCALE macro, alike
to ZTI_BATCH, but with multiple taskqs, depending on number of CPUs,
to be used in places where lock scalability is needed, while request
ordering is not so much. The code is made to create new taskq for
~6 worker threads (less for small systems, but more for very large)
up to 80% of CPU cores (previous 75% was not good for rounding down).
Both number of threads and threads per taskq are now tunable in case
somebody really wants to use all of system power for ZFS.
While obviously some benchmarks show small peak performance reduction
(not so big really, especially on systems with SMT, where use of the
second threads does not give as much performance as the first ones),
they also show dramatic latency reduction and much more smooth user-
space operation in case of high CPU usage by ZFS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#11966
The redundancy_draid.ksh and redundancy_raidz.ksh tests were updated
by commit 93c8e91fe to additionally verify self-healing. This
additional check increased the run time which can now occasionally
exceed the default maximum timeout in the CI environment. To prevent
this from causing failures increase the default timeout for the
redundancy test cases.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12043
The kernel will use the xattr property by default when not overridden
by a mount option.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11997
Commit d1d4769 takes into account the encryption key version to
decide if the local_mac could be zeroed out. However, this could lead
to failure mounting encrypted datasets created with intermediate
versions of ZFS encryption available in master between major releases.
In order to prevent this situation revert d1d4769 pending a more
comprehensive fix which addresses the mount failure case.
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #11294
Issue #12025
Issue #12300Closes#12033
mandoc: ./man/man8/zfs-mount-generator.8.in:188:2:
ERROR: skipping end of block that is not open: RE
mandoc: ./man/man8/zfs_ids_to_path.8:38:2:
ERROR: skipping unknown macro: .LP
mandoc: ./man/man8/zfs_ids_to_path.8:48:2:
ERROR: inserting missing end of block: Sh breaks Bl
mandoc: ./man/man8/zfs-wait.8:69:2:
ERROR: skipping end of block that is not open: El
mandoc: ./man/man8/zfs-program.8:460:2:
ERROR: inserting missing end of block: It breaks Bd
mandoc: ./man/man8/zfs-mount-generator.8:188:2:
ERROR: skipping end of block that is not open: RE
mandoc: ./man/man8/zstream.8:43:2:
ERROR: skipping unknown macro: .LP
mandoc: ./man/man8/zstream.8:107:2:
ERROR: inserting missing end of block: Sh breaks Bl
mandoc: ./man/man8/zstream.8:107:2:
ERROR: inserting missing end of block: Sh breaks Bl
make: *** [Makefile:1529: mancheck] Error 1
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12017
The following seven tests been observed to occasionally fail during
CI testing. This commit adds them to the list of known somewhat
flaky test cases.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12023
Linux kernel commit 0f00b82e5413571ed225ddbccad6882d7ea60bc7 removes the
revalidate_disk() handler from struct block_device_operations. This
caused a regression, and this commit eliminates the call to it and the
assignment in the block_device_operations static handler assignment
code, when configure identifies that the kernel doesn't support that
API handler.
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#11967Closes#11977
zfs_zevent_console committed multiple printk()s per line without
properly continuing them ‒ a single event could easily be fragmented
across over thirty lines, making it useless for direct application
zfs_zevent_cols exists purely to wrap the output from zfs_zevent_console
The niche this was supposed to fill can be better served by something
akin to the all-syslog ZEDLET
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#7082Closes#11996
Also always free tmp2 at the end
Before:
nabijaczleweli@tarta:~/uwu$ valgrind --leak-check=full ./blergh
==8947== Memcheck, a memory error detector
==8947== Using Valgrind-3.14.0 and LibVEX
==8947== Command: ./blergh
==8947==
(null)
==8947==
==8947== HEAP SUMMARY:
==8947== in use at exit: 23 bytes in 1 blocks
==8947== total heap usage: 3 allocs, 2 frees, 1,147 bytes allocated
==8947==
==8947== 23 bytes in 1 blocks are definitely lost in loss record 1 of 1
==8947== at 0x483577F: malloc (vg_replace_malloc.c:299)
==8947== by 0x48D74B7: vasprintf (vasprintf.c:73)
==8947== by 0x48B7833: asprintf (asprintf.c:35)
==8947== by 0x401258: zfs_get_enclosure_sysfs_path
(zutil_device_path_os.c:191)
==8947== by 0x401482: main (blergh.c:107)
==8947==
==8947== LEAK SUMMARY:
==8947== definitely lost: 23 bytes in 1 blocks
==8947== indirectly lost: 0 bytes in 0 blocks
==8947== possibly lost: 0 bytes in 0 blocks
==8947== still reachable: 0 bytes in 0 blocks
==8947== suppressed: 0 bytes in 0 blocks
==8947==
==8947== For counts of detected and suppressed errors, rerun with: -v
==8947== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
nabijaczleweli@tarta:~/uwu$ sed -n 191p zutil_device_path_os.c
tmpsize = asprintf(&tmp1, "/sys/block/%s/device", dev_name);
After:
nabijaczleweli@tarta:~/uwu$ valgrind --leak-check=full ./blergh
==9512== Memcheck, a memory error detector
==9512== Using Valgrind-3.14.0 and LibVEX
==9512== Command: ./blergh
==9512==
(null)
==9512==
==9512== HEAP SUMMARY:
==9512== in use at exit: 0 bytes in 0 blocks
==9512== total heap usage: 3 allocs, 3 frees, 1,147 bytes allocated
==9512==
==9512== All heap blocks were freed -- no leaks are possible
==9512==
==9512== For counts of detected and suppressed errors, rerun with: -v
==9512== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11993
As a bonus, this also passes the open flags into the open flags instead
of the mode (it worked by accident because O_RDONLY is 0),
correctly detects a failed map,
and prefaults the entire file since we're always writing to every page
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11993
This commits contains changes to allow running `copy-builtin` without
bash + some minor improvements.
changed shebang to /bin/sh
added -f option to `set` to globally disable unneeded globbing
replaced all `echo` commands within add_after() with `printf`
alternative to avoid possible issues with options (-neE)
dropped non-portable superfluous `readlink` command
replaced superfluous `true` command with `:` builtin alternative
replaced non-portable `--recursive` option of `cp` command with `-R`
alternative
dropped non-portable `local` keyword
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: illiliti <illiliti@protonmail.com>
Closes#12004
When dRAID performs a normal read operation only the data columns
in the raid map are read from disk. This is enough information to
calculate the checksum, verify it, and return the needed data to the
application. It's only in the event of a checksum failure that the
additional parity and any empty columns must be read since they are
required for parity reconstruction.
Reading these additional columns is handled by vdev_raidz_read_all()
which calls vdev_draid_map_alloc_empty() to expand the raid_map_t
and submit IOs for the missing columns. This all works correctly,
but it fails to account for any "short" columns. These are data
columns which are padded with a empty skip sector at the end.
Since that empty sector is not needed for a normal read it's not
read when columns is first read from disk. However, like the parity
and empty columns the skip sector is needed to perform reconstruction.
The fix is to mark any "short" columns as never being read by clearing
the rc_tried flag when expanding the raid_map_t. This will cause
the entire column to re-read from disk in the event of a checksum
failure allowing the self-healing functionality to repair the block.
Note that this only effects the self-healing feature because when
scrubbing a pool the parity, data, and empty columns are all read
initially to verify their contents. Furthermore, only blocks which
contain "short" columns would be effected, and only when the memory
backing the skip sector wasn't already zeroed out.
This change extends the existing redundancy_raidz.ksh test case to
verify self-healing (as well as resilver and scrub). Then applies
the same test case to dRAID with a slightly modified version of
the test script called redundancy_draid.ksh. The unused variable
combrec was also removed from both test cases.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12010
Afterward, git grep ZoL matches:
* README.md: * [ZoL Site](https://zfsonlinux.org)
- Correct
* etc/default/zfs.in:# ZoL userland configuration.
- Changing this would induce a needless upgrade-check,
if the user has modified the configuration;
this can be updated the next time the defaults change
* module/zfs/dmu_send.c: * ZoL < 0.7 does not handle [...]
- Before 0.7 is ZoL, so fair enough
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #11956
zfs_log_create returns void, so there is no reason to cast its return
value to void at the call site.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11994
This can be very easily triggered by adding a sleep(1) before
the wait4() on a PID-starved system: the reaper thread would wait
for a child before its entry appeared, letting old entries accumulate:
Invoking "all-debug.sh" eid=3021 pid=391
Finished "(null)" eid=0 pid=391 time=0.002432s exit=0
Invoking "all-syslog.sh" eid=3021 pid=336
Finished "(null)" eid=0 pid=336 time=0.002432s exit=0
Invoking "history_event-zfs-list-cacher.sh" eid=3021 pid=347
Invoking "all-debug.sh" eid=3022 pid=349
Finished "history_event-zfs-list-cacher.sh" eid=3021 pid=347
time=0.001669s exit=0
Finished "(null)" eid=0 pid=349 time=0.002404s exit=0
Invoking "all-syslog.sh" eid=3022 pid=370
Finished "(null)" eid=0 pid=370 time=0.002427s exit=0
Invoking "history_event-zfs-list-cacher.sh" eid=3022 pid=391
avl_find(tree, new_node, &where) == NULL
ASSERT at ../../module/avl/avl.c:641:avl_add()
Thread 1 "zed" received signal SIGABRT, Aborted.
By employing this wider lock, we atomise [wait, remove] and [fork, add]:
slowing down the reaper thread now just causes some zombies
to accumulate until it can get to them
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11963Closes#11965
Quoting <linux/exportfs.h>:
> encode_fh() should return the fileid_type on success and on error
> returns 255 (if the space needed to encode fh is greater than
> @max_len*4 bytes). On error @max_len contains the minimum size (in 4
> byte unit) needed to encode the file handle.
ZFS was not setting max_len in the case where the handle was too
small. As a result of this, the `t_name_to_handle_at.c' example in
name_to_handle_at(2) did not work on ZFS.
zfsctl_fid() will itself set max_len if called with a fid that is too
small, so if we give zfs_fid() that behavior as well, the fix is quite
easy: if the handle is too small, just use a zero-size fid instead of
the handle.
Tested by running t_name_to_handle_at on a normal file, a directory, a
.zfs directory, and a snapshot.
Thanks-to: Puck Meerburg <puck@puckipedia.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Closes#11995
Previous code tried to keep prefetch streams while moving dnode. But
it was at least not updating per-stream zs_fetchback pointers, causing
use-after-free on next access. Instead of that I see much easier and
cleaner to just drop old prefetch state and start new from scratch.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#11936Closes#11998
zp->z_lock is used in shared code for protecting projid and scantime.
We don't exercise these paths much if at all on FreeBSD, so have been
lucky enough not to have issues with the uninitialized locks so far.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#12003
Changed the default specified for zfs_dbgmsg_enable, added
clarification of interaction with zfs_flags.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#11984Closes#11986
Also minor clean-up with folding state_to_val() into a case,
unrolling the lesser-available seq into numbers,
ignoring vdev states we don't care about,
and documentation comments
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11934Closes#11935
IS_XATTRDIR is never used.
v_count is only used in two places, one immediately followed by the
use of the real name, v_usecount.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#11973
This ensures that we don't accumulate checksum errors against offline or
unavailable devices but, more importantly, means that we don't
needlessly create DTL entries for offline devices that are already
up-to-date.
Consider a 3-way mirror, with disk A always online (and so always with
an empty DTL) and B and C only occasionally online. When A & B resilver
with C offline, B's DTL will effectively be appended to C's due to these
spurious ZIOs even as the resilver empties B's DTL:
* These ZIOs land in vdev_mirror_scrub_done() and flag an error
* That flagged error causes vdev_mirror_io_done() to see
unexpected_errors, so it issues a ZIO_TYPE_WRITE repair ZIO, which
inherits ZIO_FLAG_SCAN_THREAD because zio_vdev_child_io() includes
that flag in ZIO_VDEV_CHILD_FLAGS.
* That ZIO fails, too, and eventually zio_done() gets its hands on it
and calls vdev_stat_update().
* vdev_stat_update() sees the error and this zio...
* is not speculative,
* is not due to EIO (but rather ENXIO, since the device is closed)
* has an ->io_vd != NULL (specifically, the offline leaf device)
* is a write
* is for a txg != 0 (but rather the read block's physical birth txg)
* has ZIO_FLAG_SCAN_THREAD asserted
* So: vdev_stat_update() calls vdev_dtl_dirty() on the offline vdev.
Then, when A & C resilver with B offline, that story gets replayed and
C's DTL will be appended to B's.
In fact, one does not need this permanently-broken-mirror scenario to
induce badness: breaking a mirror with no DTLs and then scrubbing will
create DTLs for all offline devices. These DTLs will persist until the
entire mirror is reassembled for the duration of the *resilver*, which,
incidentally, will not consider the devices with good data to be sources
of good data in the case of a read failure.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Wesley Filardo <nwfilardo@gmail.com>
Closes#11930
In Fedora 28 the packaging guidelines were changed such that ldconfig
should no longer be called in either the %post or %postun scriptlets.
Instead the new compatibility macros %ldconfig_post, %ldconfig_postun,
and %ldocnfig_scriptlets should be used.
Since we only currently support Fedora 31 and newer, we could drop
%post or %postun scriptlets entirely according to the guidelines.
However, since we also use the same spec file for CentOS / RHEL
it's convenient to call the macros which are available starting
with CentOS / RHEL 8. For CentOS / RHEL 7 we must still call
ldconfig in the traditional way.
https://fedoraproject.org/wiki/Changes/Removing_ldconfig_scriptlets
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11931
If zdb is not built with DEBUG mode, the ASSERT macros will be
eliminated.
This will leave vim defined, but not used (gcc warning) and
checkpoint spacemap validation loop will do nothing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#11932
Both the zpool_initialize_import_export and checkpoint_discard_busy
test cases a known to occasionally fail. Add them to the list of
known possible failures and reference the appropriate issue on the
tracker.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11949
Receiving datasets while blanket inheriting properties like zfs
receive -x mountpoint can generally be desirable, e.g. to avoid
unexpected mounts on backup hosts.
Currently this will fail to receive zvols due to the mountpoint
property being applicable to filesystems only. This limitation
currently requires operators to special-case their minds and tools
for zvols.
This change gets rid of this limitation for inherit (-x) by
Spiting up the dataset type handling: Warnings for inheriting (-x),
errors for overriding (-o).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes#11416Closes#11840Closes#11864
Introduce a specific valid function for avx512f+avx512bw (instead
of checking only for avx512f).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: Romain Dolbeau <romain@dolbeau.org>
Closes#11937Closes#11938
As soon as wait4() returns, fork() can immediately return with the same
PID, and race to lock _launched_processes_lock, then try to add the new
(duplicate) PID to _launched_processes, which asserts
By locking before wait4(), we ensure, that, given that same
unfortunate scheduling, _launched_processes_lock cannot be locked by the
spawner before we pop the process in the reaper, and only afterward will
it be added
This moves where the reaper idles when there are children from the
wait4() to the pause(), locking for the duration of that single syscall
in both the no-children and running-children cases; the impact of this
is one to two syscalls (depending on _launched_processes_lock state)
per loop
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11924Closes#11928
The special_small_blocks section directed readers to zpool(8) for
documentation on special allocation classes, while they are actually
documented in zpoolconcepts(8).
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Daniel Stevenson <daniel@dstev.net>
Closes#11918
If $FSLIST exists but is empty, the generator fails with
sort: cannot read: '/etc/zfs/zfs-list.cache/*':
No such file or directory
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11915
- Add additional logging to provide more information about why the
test failed. This including logging more of the individual commands
and the contents and differences of the record files on failure.
- Updated get_vdevs() to properly exclude all top-level vdevs
including raidz3 and draid[1-3].
- Replaced gnudd with dd. This is the only remaining place in the
test suite gnudd is used and it shouldn't be needed.
- The refill_test_env function expects the pool as the first argument
but never sets the pool variable.
- Only fill the test pools to 50% of capacity instead of 75% to help
speed up the tests.
- Fix replace_missing_devs() calculation, MINDEVSIZE should be
MINVDEVSIZE.
- Fix damage_devs() so it overwrites almost all of the device so
we're guaranteed to damage filesystem blocks.
- redundancy_stripe.ksh should not use log_mustnot to check if the
pool is healthy since the return value may be misinterpreted.
Just perform a normal conditional check and log the failure.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11906
Objtool requires the use of a DRAP register while aligning the
stack. Since a DRAP register is a gcc concept and we are
notoriously low on registers in the crypto code, it's not worth
the effort to mimic gcc generated stack realignment.
We simply silence the warning by adding the offending object files
to OBJECT_FILES_NON_STANDARD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#6950Closes#11914
This deduplicates 2 sets of caches which use the same allocation size.
Memory savings fluctuate a lot, one sample result is FreeBSD running
"make buildworld" saving ~180MB RAM in reduced page count associated
with zio caches.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#11877
This partly mirrors what the i-t script does (though that mounts all
children, recursively) ‒ /etc, /usr, /lib*, and /bin are all essential,
if present, to successfully invoke the real init, which will then mount
everything else it might need in the right order
The following extreme-case set-up boots w/o issues now:
/ zoot zfs rw,relatime,xattr,noacl
├─/etc zoot/etc zfs rw,relatime,xattr,noacl
├─/usr zoot/usr zfs rw,relatime,xattr,noacl
│ └─/usr/local zoot/usr/local zfs rw,relatime,xattr,noacl
├─/var zoot/var zfs rw,relatime,xattr,noacl
│ ├─/var/lib zoot/var/lib zfs rw,relatime,xattr,noacl
│ ├─/var/log zoot/var/log zfs rw,relatime,xattr,posixacl
│ ├─/var/cache zoot/var/cache zfs rw,relatime,xattr,noacl
│ └─/var/tmp zoot/var/tmp zfs rw,relatime,xattr,noacl
├─/home zoot/home zfs rw,relatime,xattr,noacl
│ └─/home/nab zoot/home/nab zfs rw,relatime,xattr,noacl
├─/boot zoot/boot zfs rw,relatime,xattr,noacl
├─/root zoot/home/root zfs rw,relatime,xattr,noacl
├─/opt zoot/opt zfs rw,relatime,xattr,noacl
└─/srv zoot/srv zfs rw,relatime,xattr,noacl
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11898
"debug" is also used by systemd itself, and there's really no reason for
the generator to write this much garbage by default
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11898
Fix NULL pointer dereference when reporting
checksum error for gang block in zio_done.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#11872Closes#11896
Fixes get_system_hostid() if it was set via the aforementioned sysctl
and simplifies the code a bit. The kernel and user-space must agree,
after all.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11879
This fixes /proc/sys/kernel/spl/hostid on kernels with mainline commit
32927393dc1ccd60fb2bdc05b9e8e88753761469 ("sysctl: pass kernel pointers
to ->proc_handler") ‒ 5.7-rc1 and up
The access_ok() check in copy_to_user() in proc_copyout_string() would
always fail, so all userspace reads and writes would fail with EINVAL
proc_dostring() strips only the final new-line,
but simple_strtoul() doesn't actually need a back-trimmed string ‒
writing "012345678 \n" is still allowed, as is "012345678zupsko", &c.
This alters what happens when an invalid value is written ‒
previously it'd get set to what-ever simple_strtoul() returned
(probably 0, thereby resetting it to default), now it does nothing
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11878Closes#11879
Traversal code, traverse_visitbp() does visit blocks recursively.
Indirect (Non L0) Block of size 128k could contain, 1024 block pointers
of 128 bytes. In case of full traverse OR incremental traverse, where
all blocks were modified, it could traverse large number of blocks
pointed by indirect. Traversal code does issue prefetch of blocks
traversed below indirect. This could result into large number of
async reads queued on vdev queue. So, account for prefetch issued for
blocks pointed by indirect and limit max prefetch in one go.
Module Param:
zfs_traverse_indirect_prefetch_limit: Limit of prefetch while traversing
an indirect block.
Local counters:
prefetched: Local counter to account for number prefetch done.
pidx: Index for which next prefetch to be issued.
ptidx: Index at which next prefetch to be triggered.
Keep "ptidx" somewhere in the middle of blocks prefetched, so that
blocks prefetch read gets the enough time window before their demand
read is issued.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#11802Closes#11803
This change adds SIGSTOP and SIGTSTP handling to the issig function;
this mirrors its behavior on Solaris. This way, long running kernel
tasks can be stopped with the appropriate signals. Note that doing
so with ctrl-z on the command line doesn't return control of the tty
to the shell, because tty handling is done separately from stopping
the process. That can be future work, if people feel that it is a
necessary addition.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Issue #810
Issue #10843Closes#11801
The awk command used by the checkbashisms target incorrectly
adds the escape character before the ! and # characters. This
results in the following warnings because these characters do not
need to be escaped.
awk: cmd. line:1: warning: regexp escape sequence
`\!' is not a known regexp operator
awk: cmd. line:1: warning: regexp escape sequence
`\#' is not a known regexp operator
Remove the unneeded escape character before ! and #.
Valid escape sequences are:
https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11902
Do not (incorrectly, right instead left) pad health string itself,
it will be taken care of when printing property value below.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes#11899
Follow up to d5ef91af which adds a missing 'obsoletes' for the
libzfs-devel package.
Add a comment to the zfs.spec file as a reminder that previous
versions of the package should be marked as obsolete.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11844Closes#11895
zfs_crypto_load_key() only works on encryption roots,
and zfs mount -la would fail if it encounters a datasets that
is sorted before their encroots.
To trigger:
truncate -s 40G /tmp/test
dd if=/dev/urandom of=/tmp/k bs=128 count=1 status=none
zpool create -O encryption=on -O keylocation=file:///tmp/k \
-O keyformat=passphrase test /tmp/test
zfs create -o mountpoint=/a test/a
zfs create -o mountpoint=/b test/b
zfs umount test
zfs unload-key test
zfs mount -la
The final mount errored out with:
Key load error: Keys must be loaded for
encryption root of 'test/a' (test).
Key load error: Keys must be loaded for
encryption root of 'test/b' (test).
And only /test was mounted
This technically breaks the libzfs API, but the previous behavior was
decidedly a bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11870Closes#11875
It happens to trip over an assert but does not matter for correctness at
this time. Done for future proofing.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#11884
zfs recv -n does not report some errors it could. The code to bail
out of the receive if in dry-run mode came a little early, skipping
validation of cmdprops (recv -x and -o) among others. Move the
check down to enable these additional checks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes#11862
Several improvements to the operation of the 'compatibility' property:
1) Improved handling of unrecognized features:
Change the way unrecognized features in compatibility files are handled.
* invalid features in files under /usr/share/zfs/compatibility.d
only get a warning (as these may refer to future features not yet in
the library),
* invalid features in files under /etc/zfs/compatibility.d
get an error (as these are presumed to refer to the current system).
2) Improved error reporting from zpool_load_compat.
Note: slight ABI change to zpool_load_compat for better error reporting.
3) compatibility=legacy inhibits all 'zpool upgrade' operations.
4) Detect when features are enabled outside current compatibility set
* zpool set compatibility=foo <-- print a warning
* zpool set feature@xxx=enabled <-- error
* zpool status <-- indicate this state
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes#11861
It's been observed in the CI that the required 25% of obsolete bytes
in the mapping can be to high a threshold for this test resulting in
condensing never being triggered and a test failure. To prevent these
failures make the existing zfs_condense_indirect_obsolete_pct tuning
available so the obsolete percentage can be reduced from 25% to 5%
during this test.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11869
Commit 099fa7e4 intentionally modified the libzfs ABI. However, it
failed to include an update for the libzfs.abi file. This commit
resolves the `make checkabi` warning due to that omission.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11710
The fault/auto_spare_shared, l2arc/persist_l2arc_007_pos, and
alloc_class/alloc_class_013_pos test cases are not entirely reliable
and may occasionally fail resulting in a false positive in the CI.
Add these tests to known list of possible failures until they can
be made 100% reliable.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11890
As found by
git grep -E '(open|setmntent|pipe2?)\(' |
grep -vE '((zfs|zpool)_|fd|dl|lzc_re|pidfile_|g_)open\('
FreeBSD's pidfile_open() says nothing about the flags of the files it
opens, but we can't do anything about it anyway; the implementation does
open all files with O_CLOEXEC
Consider this output with zpool.d/media appended with
"pid=$$; (ls -l /proc/$pid/fd > /dev/tty)":
$ /sbin/zpool iostat -vc media
lrwx------ 0 -> /dev/pts/0
l-wx------ 1 -> 'pipe:[3278500]'
l-wx------ 2 -> /dev/null
lrwx------ 3 -> /dev/zfs
lr-x------ 4 -> /proc/31895/mounts
lrwx------ 5 -> /dev/zfs
lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media
vs
$ ./zpool iostat -vc vendor,upath,iostat,media
lrwx------ 0 -> /dev/pts/0
l-wx------ 1 -> 'pipe:[3279887]'
l-wx------ 2 -> /dev/null
lr-x------ 10 -> /usr/lib/zfs-linux/zpool.d/media
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11866
These were fd 3, 4, and 5 by the time zfs change-key hit
execute_key_fob()
glibc appends "e" to setmntent() mode, but musl's just returns fopen()
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11866
This changes the password prompt for new encryption roots from
Enter passphrase:
Re-enter passphrase:
to
Enter new passphrase:
Re-enter new passphrase:
which makes more sense and is more consistent with "new passphrase"
now always meaning "come up with something" and plain "passphrase"
"remember that thing"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11866
A tentative implementation and discussion was done in #5285.
According to it a send --skip-missing|-s flag has been added.
In a replication stream, when there are snapshots missing in
the hierarchy, if -s is provided print a warning and ignore
dataset (and its children) instead of throwing an error
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pablo Correa Gómez <ablocorrea@hotmail.com>
Closes#11710
Without this Obsoletes, using packages built --with-spec=redhat, an
upgrade from zfs-0.7 to zfs-2.x does not cause the kmod-spl-0.7 package
to be removed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#11865
list_zvols() would happily, for zvols with spaces in their names,
assign the second half to volmode, &c., so use a normal read
and set IFS to a tab instead of using 4 separate AWK processes(?)
Similarly, in filter_out_deleted_zvols(), run zfs(8) once and use the
output directly instead of spawning a zfs(8) process per zvol
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11859
SMACK needs to have the ZFS dentry security field setup before
SMACK's d_instantiate() hook is called as it requires functioning
'__vfs_getxattr()' calls to properly set the labels.
Fxes:
1) file instantiation properly setting the object label to the
subject's label
2) proper file labeling in a transmutable directory
Functions Updated:
1) zpl_create()
2) zpl_mknod()
3) zpl_mkdir()
4) zpl_symlink()
External-issue: https://github.com/cschaufler/smack-next/issues/1
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: TerraTech <TerraTech@users.noreply.github.com>
Closes#11646Closes#11839
Kill the removal operation on every platform, not just Linux.
The test has been fixed and is now stable on FreeBSD.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11856
Added a check for alien 8.95.{1,2,3}, which is known to fail to
generate debs 100% of the time, and instead print out a message
informing the developer that it's known to be broken and linking
them to more information.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#11848Closes#11850
When a rebuild completes it will automatically schedule a follow up
scrub to verify all of the block checksums. Before setting up the
scrub execute the counterpart dsl_scan_setup_check() function to
confirm the scrub can be started. Prior to this change we'd only
check vdev_rebuild_active() which isn't as comprehensive, and using
the check function keeps all of this logic in one place.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11849
As described in #11854, zhack is occasionally segfaulting on FreeBSD.
Debugging this is proving to be tricky. To avoid false positives in
the CI add entries for the tests that use zhack in zts-report to
accept that they may occasionally fail on FreeBSD.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Issue #11854Closes#11855
Just as delay zevents can flood the zevent pipe when a vdev becomes
unresponsive, so do the deadman zevents.
Ratelimit deadman zevents according to the same tunable as for delay
zevents.
Enable deadman tests on FreeBSD and add a test for deadman event
ratelimiting.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11786
It's all of 40 bytes with 4-byte pointers and 64 with 8-byte ones
(previously 44 and 88, respectively) ‒
there's no reason it can't live on the stack
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11860
We set SA_RESTART early on, which will prevent EINTRs (indeed, to the
point of needing to clear it in the reaper, since it interferes with
pause(2)), which is the only error zed_file_write_n() actually handled
(plus, the pid write is no bigger than 12 bytes anyway)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11834
These events should currently never be generated.
Also untag _zed_event_add_nvpair() from merge with
zpool_do_events_nvprint() ‒ they serve different purposes (machine,
usually script vs human consumption) and format the output differently
as it stands
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11834
And add a note on /why/ ZEDLETs need to be owned by root
Quoth chown(2), Linux man-pages project:
Only a privileged process (Linux: one with the CAP_CHOWN capability)
may change the owner of a file.
Quoth chown(2), FreeBSD:
[EPERM] The operation would change the ownership,
but the effective user ID is not the super-user.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11834
There simply isn't a need for one, since the flags the daemon takes
are all short (mostly just toggles) and administrative in nature,
and are therefore better served by the age-old tradition of sourcing an
environment file and preparing the cmdline in the init-specific handler
itself, if needed at all
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11834
/dev/fd on Darwin
Consider the following strace output:
prlimit64(0, RLIMIT_NOFILE, NULL, {rlim_cur=1024, rlim_max=1024*1024}) = 0
Yes, that is well over a million file descriptors!
This reduces the ZED start-up time from "at least a second" to
"instantaneous", and, under strace, from "don't even try" to "usable"
by simple virtue of doing five syscalls instead of over a million;
in most cases the main loop does nothing
Recent Linuxes (5.8+) have close_range(2) for this, but that's an
overoptimisation (and libcs don't have wrappers for it yet)
This is also run by the ZEDLET pre-exec. Compare:
Finished "all-syslog.sh" eid=13 pid=6717 time=1.027100s exit=0
Finished "history_event-zfs-list-cacher.sh" eid=13 pid=6718 time=1.046923s exit=0
to
Finished "all-syslog.sh" eid=12 pid=4834 time=0.001836s exit=0
Finished "history_event-zfs-list-cacher.sh" eid=12 pid=4835 time=0.001346s exit=0
lol
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11834
200ms time-out is relatively long, but if we already hit the cap,
then we'll likely be able to spawn multiple new jobs when we wake up
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11807
rpm/redhat/zfs-kmod.spec.in has a typo in the shell code that
creates the kmod-preamble file. This typo results in the
preamble file having the wrong name,
./SOURCES/kmod-preamblenObsoletes
and missing the Obsoletes clause that has become part of the name.
Because the filename is incorrect, the built package does not have
"obsoletes" or "conflicts" set.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#11851
In order for package managers such as dnf to upgrade cleanly after
the package SONAME bump the obsolete package names must be known.
Update the new packages to correctly obsolete the old ones.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11844Closes#11847
This effectively reverts
4fc411f7a3 (part of #6807) and
f6fbe25664 (#9042) ‒
the code itself and latter PR cite symmetry with whole-disk-vdev
behaviour (presumably because rootfs vdevs are rarely whole disks),
but the code is broken for NVME devices (indeed, it'd strip the
controller number instead of the (potential) partition number, turning
"nvme0n1p1" into "nvmen1p1", which would then subsequently fail the
sysfs existence check); it could be fixed to handle those (and any
others) rather easily by dereferencing /sys/class/block/$devname,
but this isn't the place for setting this ‒ as noted in the commit that
removed setting the scheduler by default
(9e17e6f254) ‒ use an udev rule
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11838
IFS= would break loops in import_pool(), which would fault
any automatic import
Additionally $ZFS_BOOTFS from cmdline would interfere with find_rootfs()
If many pools were present, same thing could happen across multiple
find_rootfs() runs, so bail out early and clean up in error path
Suggested-by: @nachtgeist
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11278Closes#11838
get_clones_string currently returns an empty string for filesystem
snapshots which have no clones. This breaks parsable `zfs get` output as
only three columns are output, instead of 4.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Fiddaman <github@m.fiddaman.uk>
Co-authored-by: matt <matt@fiddaman.net>
Closes#11837
The exact limitations on what features are supported when booting
vary considerably depending on the environment. In order to minimize
confusion avoid categorical statements which assume GRUB2 is being
used. The supported GRUB2 features are covered earlier in this man
page for easy reference.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11842
zpool list, which is the only user, would mistakenly try to parse the
empty string as the interval in this case:
$ zpool list "a"
cannot open 'a': no such pool
$ zpool list ""
interval cannot be zero
usage: <usage string follows>
which is now symmetric with zpool get:
$ zpool list ""
cannot open '': name must begin with a letter
Avoid breaking the "interval cannot be zero" string.
There simply isn't a need for this, and it's user-facing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11841Closes#11843
The pool_checkpoint tests may incorrectly fail because several of
them invoke zdb for an imported pool. In this scenario it's not
unexpected for zdb to fail if the pool is modified. To resolve
this these zdb checks are now done after the pool has been exported.
Additionally, the default cleanup functions assumed the pool would
be imported when they were run. If this was not the case they're
exit early and fail to cleanup all of the test state causing
subsequent tests to fail. Add a check to only destroy the pool
when it is imported.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11832
/dev/zfs is 0:0 666 on most systems, so the [ -w /dev/zfs ] check always
succeeds, but if zfs isn't in $PATH (e.g. when completing from
"/sbin/zfs list" on a regular account) this can lead to error spew like
nabijaczleweli@szarotka:~$ /sbin/zfs list bash: zfs: command not found
@ bash: zfs: command not found
We only do read-only commands, and quite general ones at that,
so there's no need to elevate one way or another.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11828
Document the project's policy regarding publishing and maintaining
official OpenZFS releases.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11821
Bump the library versions as advised by the libtool guidelines.
https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
Two new functions were added but no existing functions were changed,
so we increase the version and the age (version:revision:age).
Added functions (2):
- boolean_t zpool_is_draid_spare(const char *);
- zpool_compat_status_t zpool_load_compat(const char *,
boolean_t *, char *, char *);
Additionally bump the libzpool.so version information. This library
is for internal use but we still want to update the version to track
major changes to the interfaces.
The libzfsbootenv, libuutil, libnvpair and libzfs_core libraries
have not been updated.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11817
Nothing bad happens if a prefix of your pool name matches a disk name.
This is a bit of a silly restriction at this point.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes#11781Closes#11813
The lower bound for this scaling to too low and the upper bound is too
high. Use a fixed default length of 512 instead, which is a reasonable
value on any system.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11822
ratelimit_dropped isn't protected by a lock and is expected to
be updated atomically.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11822
Recently we've been running out of free space in the ubuntu 20.04
environment resulting in test failures. This appears to be caused
by a change in the default available free space and not because of
any change in OpenZFS. Try and avoid this failure by applying a
suggested workaround which removes some unnecessary files.
https://github.com/actions/virtual-environments/issues/2840
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#11826
The configure check for iops->rename wanting flags was missing the
AC_MSG_CHECKING() so it would just print yes without saying what was
being checked.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#11825
Update the fsck.zfs helper to bubble up some already-known-about
errors if they are detected in the pool.
health=degraded => 4/"Filesystem errors left uncorrected"
health=faulted && dataset in /etc/fstab => 8/"Operational error"
pool not found => 8/"Operational error"
everything else => 0
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#11806
ZoL 0.6.1 introduced feature flags with the three features that all
implementations at the time were guaranteed to have. 0.6.4 introduced
a few more until 0.6.5 added two after that. OpenZFS 2.1 added the
dRAID feature.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mike Swanson <mikeonthecomputer@gmail.com>
Closes#11818
2021-04-07 13:24:08 -07:00
497 changed files with 17590 additions and 19262 deletions
"content":"I/O requests that are satisfied by accessing pool devices are managed by the ZIO scheduler.\nThe total latency is measured from the start of the I/O to completion by the disk.\nLatency through each queue is shown prior to its submission to the disk queue.\n\nThis view is useful for observing the effects of tuning the ZIO scheduler min and max values\n(see zfs-module-parameters(5) and [ZFS on Linux Module Parameters](https://openzfs.github.io/openzfs-docs/Performance%20and%20tuning/ZFS%20on%20Linux%20Module%20Parameters.html)):\n+ *zfs_vdev_max_active* controls the ZIO scheduler's disk queue depth (do not confuse with the block device's nr_requests)\n+ *zfs_vdev_sync_read_min_active* and *zfs_vdev_sync_read_max_active* control the synchronous queue for reads: most reads are sync\n+ *zfs_vdev_sync_write_min_active* and *zfs_vdev_sync_write_max_active* control the synchronous queue for writes: \nusually metadata or user data depending on the \"sync\" property setting or I/Os that are requested to be flushed\n+ *zfs_vdev_async_read_min_active* and *zfs_vdev_async_read_max_active* control the asynchronous queue for reads: usually prefetches\n+ *zfs_vdev_async_write_min_active* and *zfs_vdev_async_write_max_active* control the asynchronous queue for writes: \nusually the bulk of all writes at transaction group (txg) commit\n+ *zfs_vdev_scrub_min_active* and *zfs_vdev_scrub_max_active* controls the scan reads: usually scrub or resilver\n\n",
"content":"I/O requests that are satisfied by accessing pool devices are managed by the ZIO scheduler.\nThe total latency is measured from the start of the I/O to completion by the disk.\nLatency through each queue is shown prior to its submission to the disk queue.\n\nThis view is useful for observing the effects of tuning the ZIO scheduler min and max values\n(see zfs(4) and [ZFS on Linux Module Parameters](https://openzfs.github.io/openzfs-docs/Performance%20and%20tuning/ZFS%20on%20Linux%20Module%20Parameters.html)):\n+ *zfs_vdev_max_active* controls the ZIO scheduler's disk queue depth (do not confuse with the block device's nr_requests)\n+ *zfs_vdev_sync_read_min_active* and *zfs_vdev_sync_read_max_active* control the synchronous queue for reads: most reads are sync\n+ *zfs_vdev_sync_write_min_active* and *zfs_vdev_sync_write_max_active* control the synchronous queue for writes: \nusually metadata or user data depending on the \"sync\" property setting or I/Os that are requested to be flushed\n+ *zfs_vdev_async_read_min_active* and *zfs_vdev_async_read_max_active* control the asynchronous queue for reads: usually prefetches\n+ *zfs_vdev_async_write_min_active* and *zfs_vdev_async_write_max_active* control the asynchronous queue for writes: \nusually the bulk of all writes at transaction group (txg) commit\n+ *zfs_vdev_scrub_min_active* and *zfs_vdev_scrub_max_active* controls the scan reads: usually scrub or resilver\n\n",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Brian Behlendorf