Previously, the zfs.release file was created at 'make install' time.
This is slightly problematic when the file is needed without running
'make install'. Because of this, the step creating the file was removed
from 'make install' and replaced with a more appropriate zfs.release.in
file.
As a result, the zfs.release file will now be created earlier as part
of the 'configure' step as opposed to the 'make install' step.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This code was was inherited from Solaris which was careful to define
the expected VTOC for various supported architectures. While this
check may have made sense there it's something we should be able to
safely drop under Linux.
However, I'm not quite ready to do that yet. So for the moment I'm
just doing the very safe thing of adding PowerPC as a supported type.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Commit e5dc681a changed EFI_NUMPAR from 9 to 128. This means that the
on-disk EFI label has efi_nparts = 128 instead of 9. The index of the
reserved partition, however, is still 8. This breaks
efi_use_whole_disk(), which uses efi_nparts-1 as the index of the
reserved partition.
This commit fixes efi_use_whole_disk() when the index of the reserved
partition is not efi_nparts-1. It rewrites the algorithm and makes it
more robust by using the order of the partitions instead of their
numbering. It assumes that the last non-empty partition is the reserved
partition, and that the non-empty partition before that is the data
partition.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #808
Currently, zpool_vdev_online() calls zpool_relabel_disk() with a short
partition device name, which is obviously wrong because (1)
zpool_relabel_disk() expects a full, absolute path to use with open()
and (2) efi_write() must be called on an opened disk device, not a
partition device.
With this patch, zpool_relabel_disk() gets called with a full disk
device path. The path is determined using the same algorithm as
zpool_find_vdev().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #808
The error handling code around zpool_relabel_disk() is either inexistent
or wrong. The function call itself is not checked, and
zpool_relabel_disk() is generating error messages from an unitialized
buffer.
Before:
# zpool online -e homez sdb; echo $?
`: cannot relabel 'sdb1': unable to open device: 2
0
After:
# zpool online -e homez sdb; echo $?
cannot expand sdb: cannot relabel 'sdb1': unable to open device: 2
1
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #808
1949 crash during reguid causes stale config
1953 allow and unallow missing from zpool history since removal of pyzfs
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Approved by: Eric Schrock <eric.schrock@delphix.com>
References:
https://www.illumos.org/issues/1949https://www.illumos.org/issues/1953
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#665
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/1748
This commit modifies the user to kernel space ioctl ABI. Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated. If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.
Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#665
As the Gentoo sys-fs/zfs maintainer, I receive license compatibility
questions and at times, those questions can be harassing. I feel that
the presence of the GPL in Gentoo's package metadata promotes such
questions. zfs.gentoo.in is the only GPLv2 licensed file in ZFS, so I
have taken the liberty of contacting all contributors to this file to
request permission to relicense it.
All of the contributors to this file have agreed to relicense it under
the 2-clause BSD license. I have added their Signed-offs to this commit,
in order of first contribution. Thank you everyone for being so
understanding.
Signed-off-by: devsk <devsku@gmail.com>
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Tselischev <andrewtselischev@gmail.com>
Signed-off-by: Zachary Bedell <zac@thebedells.org>
Signed-off-by: Gunnar Beutner <gunnar@beutner.name>
Signed-off-by: Kyle Fuller <inbox@kylefuller.co.uk>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Closes#819
The lack of the ULL suffix causes warnings such as the following on
32-bit systems:
In function 'zfsctl_is_snapdir':
zfs-0.6.0//module/zfs/zfs_ctldir.c:151: warning: integer constant
is too large for 'long' type
We add the ULL suffix to fix that.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#813
When the ddt_zap_lookup() function was updated to dynamically
allocate memory for the cbuf variable, to save stack space, the
'csize <= sizeof (cbuf)' assertion was not updated. The result
of this was that the size of the pointer was being used in the
comparison rather than the buffer size.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
The Chaos 4.x distribution is based on RHEL 5.x which is no longer
supported by ZoL since it uses a 2.6.18 kernel.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This commit adds support for building debug and debug-devel sub packages
of the zfs-modules main package. This is to allow building packages
which are built against a debug kernel. By default, only packages are
built against a regular non-debug kernel. This can be toggled by passing
the '--with kernel-debug' parameter to rpmbuild.
Examples:
# To build packages against only the non-debug kernel
$ rpmbuild --rebuild --with kernel --without kernel-debug $SRPM
# To build packages against only the debug kernel
$ rpmbuild --rebuild --without kernel --with kernel-debug $SRPM
# To build packages against debug and non-debug kernel
$ rpmbuild --rebuild --with kernel --with kernel-debug $SRPM
Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported
for building the debug and debug-devel packages.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The performance of the ZIL is usually the main bottleneck when dealing with
synchronous, write-heavy workloads (e.g. databases). Understanding the
behavior of the ZIL is required to diagnose performance issues for these
workloads, and to tune ZIL parameters (like zil_slog_limit) accordingly.
This commit adds a new kstat page dedicated to the ZIL with some counters
which, hopefully, scheds some light into what the ZIL is doing, and how it is
doing it.
Currently, these statistics are available in /proc/spl/kstat/zfs/zil.
A description of the fields can be found in zil.h.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#786
FreeBSD #xxx: Dramatically optimize listing snapshots when user
requests only snapshot names and wants to sort them by name, ie.
when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot
properties.
Below you can find how long does it take to list 34509 snapshots
from a single disk pool before and after this change with cold and
warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
NOTE: This patch only appears in FreeBSD. If/when Illumos picks up
the change we may want to drop this patch and adopt their version.
However, for now this addresses a real issue.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #450
ZoL can create more zvols at runtime than can be configured during
system start, which hangs the init stack at reboot.
When a slow system has more than a few hundred zvols, udev will
fork bomb during system start and spend too much time in device
detection routines, so upstart kills it.
The zfs_inhibit_dev option allows an affected system to be rescued
by skipping /dev/zd* creation and thereby avoiding the udev
overload. All zvols are made inaccessible if this option is set, but
the `zfs destroy` and `zfs send` commands still work, and ZFS
filesystems can be mounted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Prevent 'rpm -Uvh *.rpm" from automatically replacing your vdev.conf
file by flagging it as a non replacable config file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#486
This is not a proper fix. It is just a workaround for the stack
smashing detected by gcc in zvol_id. We simply disable the gcc
stack protector for now when building the zvol_id udev helper.
Once the root cause is resolved this patch should be reverted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issues #569
zil_slog_limit specifies the maximum commit size to be written to the separate
log device. Larger commits bypass the separate log device and go directly to
the data devices.
The optimal value for zil_slog_limit directly depends on the latency and
throughput characteristics of both the separate log device and the data disks.
Small synchronous writes are faster on low-latency separate log devices (e.g.
SSDs) whereas large synchronous writes are faster on high-latency data disks
(e.g. spindles) because of higher throughput, especially with a large array.
The point is, the line between "small" and "large" synchronous writes in this
scenario is heavily dependent on the hardware used. That's why it should be
made configurable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#783
When failing to remove a zvol device link because it's busy, wait
a bit and retry in a loop instead of giving up immediately. This
technique is similar to the loop in zpool_label_disk_wait(), with
the same goal: waiting for the asynchronous udev processes to finish
their work.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#692
When compiling ZFS with CFLAGS=-O0 it will trigger the following error.
Resolve the issue by properly including locale.h.
../../cmd/mount_zfs/mount_zfs.c: In function 'main':
../../cmd/mount_zfs/mount_zfs.c:318:2: warning: implicit declaration
of function 'setlocale' [-Wimplicit-function-declaration]
../../cmd/mount_zfs/mount_zfs.c:318:19: error: 'LC_ALL' undeclared
(first use in this function)
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#724
torvalds/linux@adc0e91ab1 introduced
introduced d_make_root() as a replacement for d_alloc_root(). Further
commits appear to have removed d_alloc_root() from the Linux source
tree. This causes the following failure:
error: implicit declaration of function 'd_alloc_root'
[-Werror=implicit-function-declaration]
To correct this we update the code to use the current d_make_root()
interface for readability. Then we introduce an autotools check
to determine if d_make_root() is available. If it isn't then we
define some compatibility logic which used the older d_alloc_root()
interface.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#776
The logbias option is not taken into account when writing to ZVOLs. We fix
that by using the same logic as in the zfs filesystem write code
(see zfs_log.c).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#774
The configure script error message for kernels built with
CONFIG_DEBUG_LOCK_ALLOC may give the impression that the issue is
strictly with license compliance. To avoid confusion add some words
indicating that the linking stage will fail if the build continues.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#773
When a device is already open O_EXCL by another process the
`zpool import` will correctly fail. However, the default failure
message isn't very helpful. It may in fact be harmful if you
take its advise and destroy your pool.
cannot import 'tank': pool is busy
Destroy and re-create the pool from
a backup source.
Improve the error message in the EBUSY case to simply print a
message indicating that the devices are current in use. The user
will need to manually identify which process has the device open
exclusively and why.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When creating pools short device names may be used when those
devices appear in certain well known locations under /dev/.
This change adds /dev/mapper/ to that list.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path
in a storage topology to a channel name. The channel name is combined
with a disk enclosure slot number to create an alias that reflects the
physical location of the drive. This is particularly helpful when it
comes to tasks like replacing failed drives. Slot numbers may also be
re-mapped in case the default numbering is unsatisfactory. The drive
aliases will be created as symbolic links in /dev/disk/by-vdev.
The only currently supported topologies are sas_direct and sas_switch:
o sas_direct - a channel is uniquely identified by a PCI slot and a
HBA port
o sas_switch - a channel is uniquely identified by a SAS switch port
A multipath mode is supported in which dm-mpath devices are handled by
examining the first running component disk, as reported by 'multipath
-l'. In multipath mode the configuration file should contain a
channel definition with the same name for each path to a given
enclosure.
vdev_id can replace the existing zpool_id script on systems where the
storage topology conforms to sas_direct or sas_switch. The script
could be extended to support other topologies as well. The advantage
of vdev_id is that it is driven by a single static input file that can
be shared across multiple nodes having a common storage toplogy.
zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per
node and a separate slot-mapping file. However, zpool_id provides the
flexibility of using any device names that show up in
/dev/disk/by-path, so it may still be needed on some systems.
vdev_id's functionality subsumes that of the sas_switch_id script, and
it is unlikely that anyone is using it, so sas_switch_id is removed.
Finally, /dev/disk/by-vdev is added to the list of directories that
'zpool import' will scan.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#713
The CONFIG_DEBUG_LOCK_ALLOC check at configure time was added to
detect when mutex_lock() is defined as a GPL-only symbol. However,
the check as written only inferred this from this configuration
setting, it never actually checked. This change introduces that
missing check to prevent false positives.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit ce90208cf9. This
change was observed to cause problems when using a zvol to back a VM
under 2.6.32.59 kernels. This issue was filed as #710.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #342
Issue #710
The zfs-test package additionally depends on mdadm and bc to
run the zfault.sh tests.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#690
The mode argument of iops->create()/mkdir()/mknod() was changed from
an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf
check was added to detect the API change and then correctly set a
zpl_umode_t typedef. There is no functional change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#701
Previously, it was possible for the direct reclaim path to be invoked
when a write to a zvol was made. When a zvol is used as a swap device,
this often causes swap requests to depend on additional swap requests,
which deadlocks. We address this by disabling the direct reclaim path
on zvols.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#342
23bdb07d4e updated the ARC memory limits
to be 1/2 of memory or all but 4GB. Unfortunately, these values assume
zero internal fragmentation in the SLUB allocator, when in reality, the
internal fragmentation could be as high as 50%, effectively doubling
memory usage. This poses clear safety issues, because it permits the
size of ARC to exceed system memory.
This patch changes this so that the default value of arc_c_max is always
1/2 of system memory. This effectively limits the ARC to the memory that
the system has physically installed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#660
Under Solaris the ARC was designed to stay one step ahead of the
VM subsystem. It would attempt to recognize low memory situtions
before they occured and evict data from the cache. It would also
make assessments about if there was enough free memory to perform
a specific operation.
This was all possible because Solaris exposes a fairly decent
view of the memory state of the system to other kernel threads.
Linux on the other hand does not make this information easily
available. To avoid extensive modifications to the ARC the SPL
attempts to provide these same interfaces. While this works it
is not ideal and problems can arise when the ARC and Linux have
different ideas about when your out of memory. This has manifested
itself in the past as a spinning arc_reclaim_thread.
This patch abandons the emulated Solaris interfaces in favor of
the prefered Linux interface. That means moving the bulk of the
memory reclaim logic out of the arc_reclaim_thread and in to the
evict driven shrinker callback. The Linux VM will call this
function when it needs memory. The ARC is then responsible for
attempting to free the requested amount of memory if possible.
Several interfaces have been modified to accomidate this approach,
however the basic user space implementation remains the same.
The following changes almost exclusively just apply to the kernel
implementation.
* Removed the hdr_recl() reclaim callback which is redundant
with the broader arc_shrinker_func().
* Reduced arc_grow_retry to 5 seconds from 60. This is now used
internally in the ARC with arc_no_grow to indicate that direct
reclaim was recently performed. This typically indicates a
rapid change in memory demands which the kswapd threads were
unable to keep ahead of. As long as direct reclaim is happening
once every 5 seconds arc growth will be paused to avoid further
contributing to the existing memory pressure. The more common
indirect reclaim paths will not set arc_no_grow.
* arc_shrink() has been extended to take the number of bytes by
which arc_c should be reduced. This allows for a more granual
reduction of the arc target. Since the kernel provides a
reclaim value to the arc_shrinker_func() this value is used
instead of 1<<arc_shrink_shift.
* arc_reclaim_needed() has been removed. It was used to determine
if the system was under memory pressure and relied extensively
on Solaris specific VM interfaces. In most case the new code
just checks arc_no_grow which indicates that within the last
arc_grow_retry seconds direct memory reclaim occurred.
* arc_memory_throttle() has been updated to always include the
amount of evictable memory (arc and page cache) in its free
space calculations. This space is largely available in most
call paths due to direct memory reclaim.
* The Solaris pageout code was also removed to avoid confusion.
It has always been disabled due to proc_pageout being defined
as NULL in the Linux port.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Expose the zfs_mdcomp_disable variable as a module option. This
can be used to disable compression of zfs meta data which is
enabled by default. This shouldn't need to be tuned but for
most workloads, however there may be very specific instances
where it makes sense to trade disk capacity for extra cpu cycles.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Joshua M. Clulow <josh@sysmgr.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reference to Illumos issue:
https://www.illumos.org/issues/1946
Ported by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>
Refererce to Illumos issue:
https://www.illumos.org/issues/952
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#607
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>
Refererces to Illumos issue:
https://www.illumos.org/issues/1909
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#680
There is potential for deadlock in the l2arc_feed thread if KM_PUSHPAGE
is not used for the allocations made in l2arc_write_buffers.
Specifically, if KM_PUSHPAGE is not used for these allocations, it is
possible for reclaim to be triggered which can cause the l2arc_feed
thread to deadlock itself on the ARC_mru mutex. An example of this is
demonstrated in the following backtrace of the l2arc_feed thread:
crash> bt 4123
PID: 4123 TASK: ffff88062f8c1500 CPU: 6 COMMAND: "l2arc_feed"
0 [ffff88062511d610] schedule at ffffffff814eeee0
1 [ffff88062511d6d8] __mutex_lock_slowpath at ffffffff814f057e
2 [ffff88062511d748] mutex_lock at ffffffff814f041b
3 [ffff88062511d768] arc_evict at ffffffffa05130ca [zfs]
4 [ffff88062511d858] arc_adjust at ffffffffa05139a9 [zfs]
5 [ffff88062511d878] arc_shrink at ffffffffa0513a95 [zfs]
6 [ffff88062511d898] arc_kmem_reap_now at ffffffffa0513be8 [zfs]
7 [ffff88062511d8c8] arc_shrinker_func at ffffffffa0513ccc [zfs]
8 [ffff88062511d8f8] shrink_slab at ffffffff8112a17a
9 [ffff88062511d958] do_try_to_free_pages at ffffffff8112bfdf
10 [ffff88062511d9e8] try_to_free_pages at ffffffff8112c3ed
11 [ffff88062511da98] __alloc_pages_nodemask at ffffffff8112431d
12 [ffff88062511dbb8] kmem_getpages at ffffffff8115e632
13 [ffff88062511dbe8] fallback_alloc at ffffffff8115f24a
14 [ffff88062511dc68] ____cache_alloc_node at ffffffff8115efc9
15 [ffff88062511dcc8] __kmalloc at ffffffff8115fbf9
16 [ffff88062511dd18] kmem_alloc_debug at ffffffffa047b8cb [spl]
17 [ffff88062511dda8] l2arc_feed_thread at ffffffffa0511e71 [zfs]
18 [ffff88062511dea8] thread_generic_wrapper at ffffffffa047d1a1 [spl]
19 [ffff88062511dee8] kthread at ffffffff81090a86
20 [ffff88062511df48] kernel_thread at ffffffff8100c14a
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Add support for the `zfs list -t snap` alias which is available under
Oracle Solaris 11.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#640
For consistency, and because it's handy, add the 'zfs snap' alias which
was introduced by Oracle Solaris 11. This includes an update to the
man page to reflect all the available alias (snap, umount, and recv).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#640
1356 zfs dataset prefetch code not working
Reviewed by: Matthew Ahrens <matt@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References to Illumos issue:
https://www.illumos.org/issues/1346https://www.illumos.org/issues/1356
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#647
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>
References to Illumos issue:
https://www.illumos.org/issues/1475
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#648
1952 memory leak when adding a file-based l2arc device
1954 leak in ZFS from metaslab_group_create and zfs_ereport_checksum
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>
References to Illumos issues:
https://www.illumos.org/issues/1951https://www.illumos.org/issues/1952https://www.illumos.org/issues/1954
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#650
This change appears to be exclusive to SmartOS. It is not present in
illumos-gate but it just adds some needed error handling. This is
clearly preferable to simply ASSERTING which is what would occur
prior to the patch.
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#652
vdev_tsd can be NULL for certain vdev states.
At least in userland testing with ztest.
References to Illumos issue:
https://www.illumos.org/issues/1680
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#655
