mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-25 18:59:33 +03:00
Add vdev_id for JBOD-friendly udev aliases
vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
This commit is contained in:
Ned A. Bass
Brian Behlendorf
parent
e5b8562277
commit
821b683436
@ -1,2 +1,2 @@
|
||||
SUBDIRS = zfs zpool zdb zinject ztest zpios mount_zfs
|
||||
SUBDIRS += zpool_layout zvol_id zpool_id sas_switch_id
|
||||
SUBDIRS += zpool_layout zvol_id zpool_id vdev_id
|
||||
|
||||
@ -329,7 +329,7 @@ top_srcdir = @top_srcdir@
|
||||
udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
SUBDIRS = zfs zpool zdb zinject ztest zpios mount_zfs zpool_layout \
|
||||
zvol_id zpool_id sas_switch_id
|
||||
zvol_id zpool_id vdev_id
|
||||
all: all-recursive
|
||||
|
||||
.SUFFIXES:
|
||||
|
||||
@ -1 +0,0 @@
|
||||
dist_udev_SCRIPTS = sas_switch_id
|
||||
@ -1,96 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# sas_switch_id
|
||||
#
|
||||
# Callout script for multipathd to obtain disk UUIDs. Combine the UUID
|
||||
# from the scsi_id program with the SAS switch port number and enclosure
|
||||
# bay number, if available. This naming convention enables easier
|
||||
# identification of the physical drive location when multiple disk
|
||||
# enclosures are accessed via a SAS switch. For other storage
|
||||
# topologies just return the undecorated UUID of the drive.
|
||||
|
||||
PHYS_PER_PORT=4
|
||||
DEV=
|
||||
|
||||
usage() {
|
||||
cat << EOF
|
||||
Usage: sas_switch_id [-d disk] [-p phys_per_port]
|
||||
-d Basename of the disk device [default=none]
|
||||
-p Number of PHYs per switch port [default=${PHYS_PER_PORT}]
|
||||
-h Show this message
|
||||
EOF
|
||||
exit 0
|
||||
}
|
||||
|
||||
while getopts 'd:p:h' OPTION; do
|
||||
case ${OPTION} in
|
||||
d)
|
||||
DEV=${OPTARG}
|
||||
;;
|
||||
p)
|
||||
PHYS_PER_PORT=${OPTARG}
|
||||
;;
|
||||
h)
|
||||
usage
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
if [ -z "$DEV" ] ; then
|
||||
echo "Error: missing required option -d"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
UUID=`/lib/udev/scsi_id --whitelisted --device=/dev/$DEV`
|
||||
if [ $? != 0 -o -z "$UUID" ] ; then
|
||||
exit 1
|
||||
fi
|
||||
sys_path=`udevadm info -q path -p /sys/block/$DEV`
|
||||
dirs=(`echo "$sys_path" | tr / ' '`)
|
||||
switch_port_dir="/sys"
|
||||
|
||||
# Get path up to /sys/.../hostX
|
||||
for (( i=0; i<${#dirs[*]}; i++ )); do
|
||||
d=${dirs[$i]}
|
||||
switch_port_dir=$switch_port_dir/$d
|
||||
echo $d | egrep -q -e '^host[0-9]+$' && break
|
||||
done
|
||||
|
||||
if [ $i = ${#dirs[*]} ] ; then
|
||||
echo $UUID
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# The directory three levels beneath /sys/.../hostX contains
|
||||
# symlinks to phy devices that reveal the switch port number.
|
||||
# Lowest phy number is $PHYS_PER_PORT*switch_port_number.
|
||||
for (( j=(($i+1)) ; j<(($i+4)); j++ )); do
|
||||
switch_port_dir=$switch_port_dir/${dirs[$j]}
|
||||
done
|
||||
pushd $switch_port_dir > /dev/null
|
||||
PHY=`ls -d phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
|
||||
PORT=$(( $PHY / $PHYS_PER_PORT ))
|
||||
popd > /dev/null
|
||||
if [ -z "$PHY" ] ; then
|
||||
echo $UUID
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Look in /sys/.../sas_device/end_device-X for the bay_identifier
|
||||
# attribute.
|
||||
end_device_dir=$switch_port_dir
|
||||
for (( k=$j ; k<${#dirs[*]} ; k++ )); do
|
||||
d=${dirs[$k]}
|
||||
end_device_dir=$end_device_dir/$d
|
||||
if echo $d | egrep -q -e '^end_device' ; then
|
||||
end_device_dir=$end_device_dir/sas_device/$d
|
||||
break
|
||||
fi
|
||||
done
|
||||
SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
|
||||
if [ -z "$SLOT" ] ; then
|
||||
echo $UUID
|
||||
exit 0
|
||||
fi
|
||||
|
||||
echo "$UUID-switch-port:$PORT-slot:$SLOT"
|
||||
1
cmd/vdev_id/Makefile.am
Normal file
1
cmd/vdev_id/Makefile.am
Normal file
@ -0,0 +1 @@
|
||||
dist_udev_SCRIPTS = vdev_id
|
||||
@ -35,7 +35,7 @@ POST_UNINSTALL = :
|
||||
build_triplet = @build@
|
||||
host_triplet = @host@
|
||||
target_triplet = @target@
|
||||
subdir = cmd/sas_switch_id
|
||||
subdir = cmd/vdev_id
|
||||
DIST_COMMON = $(dist_udev_SCRIPTS) $(srcdir)/Makefile.am \
|
||||
$(srcdir)/Makefile.in
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
@ -313,7 +313,7 @@ top_builddir = @top_builddir@
|
||||
top_srcdir = @top_srcdir@
|
||||
udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
dist_udev_SCRIPTS = sas_switch_id
|
||||
dist_udev_SCRIPTS = vdev_id
|
||||
all: all-am
|
||||
|
||||
.SUFFIXES:
|
||||
@ -326,9 +326,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi
|
||||
exit 1;; \
|
||||
esac; \
|
||||
done; \
|
||||
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/sas_switch_id/Makefile'; \
|
||||
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/vdev_id/Makefile'; \
|
||||
$(am__cd) $(top_srcdir) && \
|
||||
$(AUTOMAKE) --gnu cmd/sas_switch_id/Makefile
|
||||
$(AUTOMAKE) --gnu cmd/vdev_id/Makefile
|
||||
.PRECIOUS: Makefile
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
|
||||
@case '$?' in \
|
||||
291
cmd/vdev_id/vdev_id
Executable file
291
cmd/vdev_id/vdev_id
Executable file
@ -0,0 +1,291 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
# vdev_id: udev helper to generate user-friendly names for JBOD disks
|
||||
#
|
||||
# This script parses the file /etc/zfs/vdev_id.conf to map a
|
||||
# physical path in a storage topology to a channel name. The
|
||||
# channel name is combined with a disk enclosure slot number to
|
||||
# create an alias that reflects the physical location of the drive.
|
||||
# This is particularly helpful when it comes to tasks like replacing
|
||||
# failed drives. Slot numbers may also be re-mapped in case the
|
||||
# default numbering is unsatisfactory. The drive aliases will be
|
||||
# created as symbolic links in /dev/disk/by-vdev.
|
||||
#
|
||||
# The only currently supported topologies are sas_direct and
|
||||
# sas_switch. A multipath mode is supported in which dm-mpath
|
||||
# devices are handled by examining the first-listed running
|
||||
# component disk. In multipath mode the configuration file
|
||||
# should contain a channel definition with the same name for
|
||||
# each path to a given enclosure.
|
||||
|
||||
#
|
||||
# Some example configuration files are given below.
|
||||
|
||||
# #
|
||||
# # Example vdev_id.conf - sas_direct.
|
||||
# #
|
||||
#
|
||||
# multipath no
|
||||
# topology sas_direct
|
||||
# phys_per_port 4
|
||||
#
|
||||
# # PCI_ID HBA PORT CHANNEL NAME
|
||||
# channel 85:00.0 1 A
|
||||
# channel 85:00.0 0 B
|
||||
# channel 86:00.0 1 C
|
||||
# channel 86:00.0 0 D
|
||||
#
|
||||
# # Linux Mapped
|
||||
# # Slot Slot
|
||||
# slot 1 7
|
||||
# slot 2 10
|
||||
# slot 3 3
|
||||
# slot 4 6
|
||||
# slot 5 2
|
||||
# slot 6 8
|
||||
# slot 7 1
|
||||
# slot 8 4
|
||||
# slot 9 9
|
||||
# slot 10 5
|
||||
|
||||
# #
|
||||
# # Example vdev_id.conf - sas_switch
|
||||
# #
|
||||
#
|
||||
# topology sas_switch
|
||||
#
|
||||
# # SWITCH PORT CHANNEL NAME
|
||||
# channel 1 A
|
||||
# channel 2 B
|
||||
# channel 3 C
|
||||
# channel 4 D
|
||||
|
||||
# #
|
||||
# # Example vdev_id.conf - multipath
|
||||
# #
|
||||
#
|
||||
# multipath yes
|
||||
#
|
||||
# # PCI_ID HBA PORT CHANNEL NAME
|
||||
# channel 85:00.0 1 A
|
||||
# channel 85:00.0 0 B
|
||||
# channel 86:00.0 1 A
|
||||
# channel 86:00.0 0 B
|
||||
|
||||
PATH=/bin:/sbin:/usr/bin:/usr/sbin
|
||||
CONFIG=/etc/zfs/vdev_id.conf
|
||||
PHYS_PER_PORT=
|
||||
DEV=
|
||||
SLOT_MAP=
|
||||
CHANNEL_MAP=
|
||||
MULTIPATH=
|
||||
TOPOLOGY=
|
||||
declare -i i j
|
||||
|
||||
usage() {
|
||||
cat << EOF
|
||||
Usage: vdev_id [-h]
|
||||
vdev_id <-d device> [-c config_file] [-p phys_per_port]
|
||||
[-g sas_direct|sas_switch] [-m]
|
||||
|
||||
-c specify name of alernate config file [default=$CONFIG]
|
||||
-d specify basename of device (i.e. sda)
|
||||
-g Storage network topology [default="$TOPOLOGY"]
|
||||
-m Run in multipath mode
|
||||
-p number of phy's per switch port [default=$PHYS_PER_PORT]
|
||||
-h show this summary
|
||||
EOF
|
||||
exit 0
|
||||
}
|
||||
|
||||
map_slot() {
|
||||
local LINUX_SLOT=$1
|
||||
local MAPPED_SLOT=
|
||||
|
||||
MAPPED_SLOT=`awk "/^slot / && \\$2 == ${LINUX_SLOT} \
|
||||
{ print \\$3; exit }" $CONFIG`
|
||||
if [ -z "$MAPPED_SLOT" ] ; then
|
||||
MAPPED_SLOT=$LINUX_SLOT
|
||||
fi
|
||||
printf "%d" ${MAPPED_SLOT}
|
||||
}
|
||||
|
||||
map_channel() {
|
||||
local MAPPED_CHAN=
|
||||
local PCI_ID=$1
|
||||
local PORT=$2
|
||||
|
||||
case $TOPOLOGY in
|
||||
"sas_switch")
|
||||
MAPPED_CHAN=`awk "/^channel / && \\$2 == ${PORT} \
|
||||
{ print \\$3; exit }" $CONFIG`
|
||||
;;
|
||||
"sas_direct")
|
||||
MAPPED_CHAN=`awk "/^channel / && \\$2 == \"${PCI_ID}\" && \
|
||||
\\$3 == ${PORT} { print \\$4; exit }" \
|
||||
$CONFIG`
|
||||
;;
|
||||
esac
|
||||
printf "%s" ${MAPPED_CHAN}
|
||||
}
|
||||
|
||||
while getopts 'c:s:d:g:mp:h' OPTION; do
|
||||
case ${OPTION} in
|
||||
c)
|
||||
CONFIG=`readlink -e ${OPTARG}`
|
||||
;;
|
||||
d)
|
||||
DEV=${OPTARG}
|
||||
;;
|
||||
g)
|
||||
TOPOLOGY=$OPTARG
|
||||
;;
|
||||
p)
|
||||
PHYS_PER_PORT=${OPTARG}
|
||||
;;
|
||||
m)
|
||||
MULTIPATH_MODE=yes
|
||||
;;
|
||||
s)
|
||||
SLOT_MAP=`readlink -e ${OPTARG}`
|
||||
if [ ! -r $SLOT_MAP ] ; then
|
||||
echo "Error: $SLOT_MAP is nonexistant or unreadable"
|
||||
exit 1
|
||||
fi
|
||||
;;
|
||||
h)
|
||||
usage
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
if [ ! -r $CONFIG ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
if [ -z "$DEV" ] ; then
|
||||
echo "Error: missing required option -d"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "$TOPOLOGY" ] ; then
|
||||
TOPOLOGY=`awk "/^topology /{print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
TOPOLOGY=${TOPOLOGY:-sas_direct}
|
||||
case $TOPOLOGY in
|
||||
sas_direct|sas_switch)
|
||||
;;
|
||||
*)
|
||||
echo "Error: unknown topology $TOPOLOGY"
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
|
||||
if [ -z "$PHYS_PER_PORT" ] ; then
|
||||
PHYS_PER_PORT=`awk "/^phys_per_port /{print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
PHYS_PER_PORT=${PHYS_PER_PORT:-4}
|
||||
if ! echo $PHYS_PER_PORT | egrep -q '^[0-9]+$' ; then
|
||||
echo "Error: phys_per_port value $PHYS_PER_PORT is non-numeric"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "$MULTIPATH_MODE" ] ; then
|
||||
MULTIPATH_MODE=`awk "/^multipath /{print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
|
||||
# Use first running component device if we're handling a dm-mpath device.
|
||||
if [ "$MULTIPATH_MODE" = "yes" ] ; then
|
||||
# If udev didn't tell us the UUID via DM_NAME, find it in /dev/mapper
|
||||
if [ -z "$DM_NAME" ] ; then
|
||||
DM_NAME=`ls -l --full-time /dev/mapper |
|
||||
awk "/\/$DEV$/{print \\$9}"`
|
||||
fi
|
||||
|
||||
# For raw disks udev exports DEVTYPE=partition when handling partitions,
|
||||
# and the rules can be written to take advantage of this to append a
|
||||
# -part suffix. For dm devices we get DEVTYPE=disk even for partitions
|
||||
# so we have to append the -part suffix directly in the helper.
|
||||
if [ "$DEVTYPE" != "partition" ] ; then
|
||||
PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
|
||||
fi
|
||||
|
||||
# Strip off partition information.
|
||||
DM_NAME=`echo $DM_NAME | sed 's/p[0-9][0-9]*$//'`
|
||||
if [ -z "$DM_NAME" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Get the raw scsi device name from multipath -l.
|
||||
DEV=`multipath -l $DM_NAME |awk '/running/{print $3 ; exit}'`
|
||||
if [ -z "$DEV" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
fi
|
||||
|
||||
if echo $DEV | grep -q ^/devices/ ; then
|
||||
sys_path=$DEV
|
||||
else
|
||||
sys_path=`udevadm info -q path -p /sys/block/$DEV 2>/dev/null`
|
||||
fi
|
||||
|
||||
dirs=(`echo "$sys_path" | tr / ' '`)
|
||||
scsi_host_dir="/sys"
|
||||
|
||||
# Get path up to /sys/.../hostX
|
||||
for (( i=0; i<${#dirs[*]}; i++ )); do
|
||||
d=${dirs[$i]}
|
||||
scsi_host_dir="$scsi_host_dir/$d"
|
||||
echo $d | egrep -q -e '^host[0-9]+$' && break
|
||||
done
|
||||
|
||||
if [ $i = ${#dirs[*]} ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
PCI_ID=`echo ${dirs[$(( $i - 1 ))]} | awk -F: '{print $2":"$3}'`
|
||||
|
||||
# In sas_switch mode, the directory three levels beneath /sys/.../hostX
|
||||
# contains symlinks to phy devices that reveal the switch port number. In
|
||||
# sas_direct mode, the phy links one directory down reveal the HBA port.
|
||||
port_dir=$scsi_host_dir
|
||||
case $TOPOLOGY in
|
||||
"sas_switch") j=$(($i+4)) ;;
|
||||
"sas_direct") j=$(($i + 1)) ;;
|
||||
esac
|
||||
for (( i++; i<=$j; i++ )); do
|
||||
port_dir="$port_dir/${dirs[$i]}"
|
||||
done
|
||||
|
||||
PHY=`ls -d $port_dir/phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
|
||||
if [ -z "$PHY" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
PORT=$(( $PHY / $PHYS_PER_PORT ))
|
||||
|
||||
# Look in /sys/.../sas_device/end_device-X for the bay_identifier
|
||||
# attribute.
|
||||
end_device_dir=$port_dir
|
||||
for (( ; i<${#dirs[*]} ; i++ )); do
|
||||
d=${dirs[$i]}
|
||||
end_device_dir="$end_device_dir/$d"
|
||||
if echo $d | egrep -q -e '^end_device' ; then
|
||||
end_device_dir="$end_device_dir/sas_device/$d"
|
||||
break
|
||||
fi
|
||||
done
|
||||
|
||||
SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
|
||||
if [ -z "$SLOT" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
SLOT=`map_slot $SLOT`
|
||||
CHAN=`map_channel $PCI_ID $PORT`
|
||||
if [ -z "$CHAN" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
ID_VDEV=${CHAN}${SLOT}${PART}
|
||||
|
||||
echo "ID_VDEV=${ID_VDEV}"
|
||||
echo "ID_VDEV_PATH=disk/by-vdev/${ID_VDEV}"
|
||||
@ -367,9 +367,9 @@ is_whole_disk(const char *path)
|
||||
/*
|
||||
* This may be a shorthand device path or it could be total gibberish.
|
||||
* Check to see if it's a known device in /dev/, /dev/disk/by-id,
|
||||
* /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid, or
|
||||
* /dev/disk/zpool/. As part of this check, see if we've been given
|
||||
* an entire disk (minus the slice number).
|
||||
* /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid,
|
||||
* /dev/disk/by-vdev, or /dev/disk/zpool/. As part of this check, see
|
||||
* if we've been given an entire disk (minus the slice number).
|
||||
*/
|
||||
static int
|
||||
is_shorthand_path(const char *arg, char *path,
|
||||
|
||||
5
configure
vendored
5
configure
vendored
@ -24325,7 +24325,7 @@ $as_echo_n "checking whether dmu tx validation is enabled... " >&6; }
|
||||
$as_echo "$enable_debug_dmu_tx" >&6; }
|
||||
|
||||
|
||||
ac_config_files="$ac_config_files Makefile dracut/Makefile dracut/90zfs/Makefile udev/Makefile udev/rules.d/Makefile etc/Makefile etc/init.d/Makefile etc/zfs/Makefile man/Makefile man/man8/Makefile lib/Makefile lib/libspl/Makefile lib/libspl/asm-generic/Makefile lib/libspl/asm-i386/Makefile lib/libspl/asm-x86_64/Makefile lib/libspl/include/Makefile lib/libspl/include/ia32/Makefile lib/libspl/include/ia32/sys/Makefile lib/libspl/include/rpc/Makefile lib/libspl/include/sys/Makefile lib/libspl/include/sys/sysevent/Makefile lib/libspl/include/sys/dktp/Makefile lib/libspl/include/util/Makefile lib/libavl/Makefile lib/libefi/Makefile lib/libnvpair/Makefile lib/libunicode/Makefile lib/libuutil/Makefile lib/libzpool/Makefile lib/libzfs/Makefile lib/libshare/Makefile cmd/Makefile cmd/zdb/Makefile cmd/zfs/Makefile cmd/zinject/Makefile cmd/zpool/Makefile cmd/ztest/Makefile cmd/zpios/Makefile cmd/mount_zfs/Makefile cmd/zpool_layout/Makefile cmd/zvol_id/Makefile cmd/zpool_id/Makefile cmd/sas_switch_id/Makefile module/Makefile module/avl/Makefile module/nvpair/Makefile module/unicode/Makefile module/zcommon/Makefile module/zfs/Makefile module/zpios/Makefile include/Makefile include/linux/Makefile include/sys/Makefile include/sys/fs/Makefile include/sys/fm/Makefile include/sys/fm/fs/Makefile scripts/Makefile scripts/zpios-profile/Makefile scripts/zpios-test/Makefile scripts/zpool-config/Makefile scripts/zpool-layout/Makefile scripts/common.sh zfs.spec zfs-modules.spec PKGBUILD-zfs PKGBUILD-zfs-modules zfs-script-config.sh"
|
||||
ac_config_files="$ac_config_files Makefile dracut/Makefile dracut/90zfs/Makefile udev/Makefile udev/rules.d/Makefile etc/Makefile etc/init.d/Makefile etc/zfs/Makefile man/Makefile man/man5/Makefile man/man8/Makefile lib/Makefile lib/libspl/Makefile lib/libspl/asm-generic/Makefile lib/libspl/asm-i386/Makefile lib/libspl/asm-x86_64/Makefile lib/libspl/include/Makefile lib/libspl/include/ia32/Makefile lib/libspl/include/ia32/sys/Makefile lib/libspl/include/rpc/Makefile lib/libspl/include/sys/Makefile lib/libspl/include/sys/sysevent/Makefile lib/libspl/include/sys/dktp/Makefile lib/libspl/include/util/Makefile lib/libavl/Makefile lib/libefi/Makefile lib/libnvpair/Makefile lib/libunicode/Makefile lib/libuutil/Makefile lib/libzpool/Makefile lib/libzfs/Makefile lib/libshare/Makefile cmd/Makefile cmd/zdb/Makefile cmd/zfs/Makefile cmd/zinject/Makefile cmd/zpool/Makefile cmd/ztest/Makefile cmd/zpios/Makefile cmd/mount_zfs/Makefile cmd/zpool_layout/Makefile cmd/zvol_id/Makefile cmd/zpool_id/Makefile cmd/vdev_id/Makefile module/Makefile module/avl/Makefile module/nvpair/Makefile module/unicode/Makefile module/zcommon/Makefile module/zfs/Makefile module/zpios/Makefile include/Makefile include/linux/Makefile include/sys/Makefile include/sys/fs/Makefile include/sys/fm/Makefile include/sys/fm/fs/Makefile scripts/Makefile scripts/zpios-profile/Makefile scripts/zpios-test/Makefile scripts/zpool-config/Makefile scripts/zpool-layout/Makefile scripts/common.sh zfs.spec zfs-modules.spec PKGBUILD-zfs PKGBUILD-zfs-modules zfs-script-config.sh"
|
||||
|
||||
|
||||
cat >confcache <<\_ACEOF
|
||||
@ -25250,6 +25250,7 @@ do
|
||||
"etc/init.d/Makefile") CONFIG_FILES="$CONFIG_FILES etc/init.d/Makefile" ;;
|
||||
"etc/zfs/Makefile") CONFIG_FILES="$CONFIG_FILES etc/zfs/Makefile" ;;
|
||||
"man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
|
||||
"man/man5/Makefile") CONFIG_FILES="$CONFIG_FILES man/man5/Makefile" ;;
|
||||
"man/man8/Makefile") CONFIG_FILES="$CONFIG_FILES man/man8/Makefile" ;;
|
||||
"lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
|
||||
"lib/libspl/Makefile") CONFIG_FILES="$CONFIG_FILES lib/libspl/Makefile" ;;
|
||||
@ -25283,7 +25284,7 @@ do
|
||||
"cmd/zpool_layout/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/zpool_layout/Makefile" ;;
|
||||
"cmd/zvol_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/zvol_id/Makefile" ;;
|
||||
"cmd/zpool_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/zpool_id/Makefile" ;;
|
||||
"cmd/sas_switch_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/sas_switch_id/Makefile" ;;
|
||||
"cmd/vdev_id/Makefile") CONFIG_FILES="$CONFIG_FILES cmd/vdev_id/Makefile" ;;
|
||||
"module/Makefile") CONFIG_FILES="$CONFIG_FILES module/Makefile" ;;
|
||||
"module/avl/Makefile") CONFIG_FILES="$CONFIG_FILES module/avl/Makefile" ;;
|
||||
"module/nvpair/Makefile") CONFIG_FILES="$CONFIG_FILES module/nvpair/Makefile" ;;
|
||||
|
||||
@ -64,6 +64,7 @@ AC_CONFIG_FILES([
|
||||
etc/init.d/Makefile
|
||||
etc/zfs/Makefile
|
||||
man/Makefile
|
||||
man/man5/Makefile
|
||||
man/man8/Makefile
|
||||
lib/Makefile
|
||||
lib/libspl/Makefile
|
||||
@ -97,7 +98,7 @@ AC_CONFIG_FILES([
|
||||
cmd/zpool_layout/Makefile
|
||||
cmd/zvol_id/Makefile
|
||||
cmd/zpool_id/Makefile
|
||||
cmd/sas_switch_id/Makefile
|
||||
cmd/vdev_id/Makefile
|
||||
module/Makefile
|
||||
module/avl/Makefile
|
||||
module/nvpair/Makefile
|
||||
|
||||
@ -1,6 +1,9 @@
|
||||
pkgsysconfdir = $(sysconfdir)/zfs
|
||||
|
||||
pkgsysconf_DATA = \
|
||||
vdev_id.conf.sas_direct.example \
|
||||
vdev_id.conf.sas_switch.example \
|
||||
vdev_id.conf.multipath.example \
|
||||
zdev.conf \
|
||||
zdev.conf.supermicro.example \
|
||||
zdev.conf.dragon.example \
|
||||
|
||||
@ -314,6 +314,9 @@ udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
pkgsysconfdir = $(sysconfdir)/zfs
|
||||
pkgsysconf_DATA = \
|
||||
vdev_id.conf.sas_direct.example \
|
||||
vdev_id.conf.sas_switch.example \
|
||||
vdev_id.conf.multipath.example \
|
||||
zdev.conf \
|
||||
zdev.conf.supermicro.example \
|
||||
zdev.conf.dragon.example \
|
||||
|
||||
7
etc/zfs/vdev_id.conf.multipath.example
Normal file
7
etc/zfs/vdev_id.conf.multipath.example
Normal file
@ -0,0 +1,7 @@
|
||||
multipath yes
|
||||
|
||||
# PCI_ID HBA PORT CHANNEL NAME
|
||||
channel 85:00.0 1 A
|
||||
channel 85:00.0 0 B
|
||||
channel 86:00.0 1 A
|
||||
channel 86:00.0 0 B
|
||||
22
etc/zfs/vdev_id.conf.sas_direct.example
Normal file
22
etc/zfs/vdev_id.conf.sas_direct.example
Normal file
@ -0,0 +1,22 @@
|
||||
multipath no
|
||||
topology sas_direct
|
||||
phys_per_port 4
|
||||
|
||||
# PCI_ID HBA PORT CHANNEL NAME
|
||||
channel 85:00.0 1 A
|
||||
channel 85:00.0 0 B
|
||||
channel 86:00.0 1 C
|
||||
channel 86:00.0 0 D
|
||||
|
||||
# Linux Mapped
|
||||
# Slot Slot
|
||||
slot 1 7
|
||||
slot 2 10
|
||||
slot 3 3
|
||||
slot 4 6
|
||||
slot 5 2
|
||||
slot 6 8
|
||||
slot 7 1
|
||||
slot 8 4
|
||||
slot 9 9
|
||||
slot 10 5
|
||||
7
etc/zfs/vdev_id.conf.sas_switch.example
Normal file
7
etc/zfs/vdev_id.conf.sas_switch.example
Normal file
@ -0,0 +1,7 @@
|
||||
topology sas_switch
|
||||
|
||||
# SWITCH PORT CHANNEL NAME
|
||||
channel 1 A
|
||||
channel 2 B
|
||||
channel 3 C
|
||||
channel 4 D
|
||||
@ -821,11 +821,12 @@ int
|
||||
zfs_resolve_shortname(const char *name, char *path, size_t pathlen)
|
||||
{
|
||||
int i, err;
|
||||
char dirs[5][9] = {"by-id", "by-label", "by-path", "by-uuid", "zpool"};
|
||||
char dirs[6][9] = {"by-id", "by-label", "by-path", "by-uuid", "zpool",
|
||||
"by-vdev"};
|
||||
|
||||
(void) snprintf(path, pathlen, "%s/%s", DISK_ROOT, name);
|
||||
err = access(path, F_OK);
|
||||
for (i = 0; i < 5 && err < 0; i++) {
|
||||
for (i = 0; i < 6 && err < 0; i++) {
|
||||
(void) snprintf(path, pathlen, "%s/%s/%s",
|
||||
UDISK_ROOT, dirs[i], name);
|
||||
err = access(path, F_OK);
|
||||
|
||||
@ -1 +1 @@
|
||||
SUBDIRS = man8
|
||||
SUBDIRS = man5 man8
|
||||
|
||||
@ -328,7 +328,7 @@ top_builddir = @top_builddir@
|
||||
top_srcdir = @top_srcdir@
|
||||
udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
SUBDIRS = man8
|
||||
SUBDIRS = man5 man8
|
||||
all: all-recursive
|
||||
|
||||
.SUFFIXES:
|
||||
|
||||
5
man/man5/Makefile.am
Normal file
5
man/man5/Makefile.am
Normal file
@ -0,0 +1,5 @@
|
||||
man_MANS = vdev_id.conf.5
|
||||
EXTRA_DIST = $(man_MANS)
|
||||
|
||||
install-data-local:
|
||||
$(INSTALL) -d -m 0755 "$(DESTDIR)$(mandir)/man5"
|
||||
565
man/man5/Makefile.in
Normal file
565
man/man5/Makefile.in
Normal file
@ -0,0 +1,565 @@
|
||||
# Makefile.in generated by automake 1.11.1 from Makefile.am.
|
||||
# @configure_input@
|
||||
|
||||
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
|
||||
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
|
||||
# Inc.
|
||||
# This Makefile.in is free software; the Free Software Foundation
|
||||
# gives unlimited permission to copy and/or distribute it,
|
||||
# with or without modifications, as long as this notice is preserved.
|
||||
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
||||
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
||||
# PARTICULAR PURPOSE.
|
||||
|
||||
@SET_MAKE@
|
||||
VPATH = @srcdir@
|
||||
pkgdatadir = $(datadir)/@PACKAGE@
|
||||
pkgincludedir = $(includedir)/@PACKAGE@
|
||||
pkglibdir = $(libdir)/@PACKAGE@
|
||||
pkglibexecdir = $(libexecdir)/@PACKAGE@
|
||||
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
|
||||
install_sh_DATA = $(install_sh) -c -m 644
|
||||
install_sh_PROGRAM = $(install_sh) -c
|
||||
install_sh_SCRIPT = $(install_sh) -c
|
||||
INSTALL_HEADER = $(INSTALL_DATA)
|
||||
transform = $(program_transform_name)
|
||||
NORMAL_INSTALL = :
|
||||
PRE_INSTALL = :
|
||||
POST_INSTALL = :
|
||||
NORMAL_UNINSTALL = :
|
||||
PRE_UNINSTALL = :
|
||||
POST_UNINSTALL = :
|
||||
build_triplet = @build@
|
||||
host_triplet = @host@
|
||||
target_triplet = @target@
|
||||
subdir = man/man5
|
||||
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
am__aclocal_m4_deps = \
|
||||
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
|
||||
$(top_srcdir)/config/kernel-automount.m4 \
|
||||
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
|
||||
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
|
||||
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
|
||||
$(top_srcdir)/config/kernel-bdi.m4 \
|
||||
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
|
||||
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
|
||||
$(top_srcdir)/config/kernel-bio-failfast.m4 \
|
||||
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-end-request.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-discard.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-flush.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
|
||||
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
|
||||
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
|
||||
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
|
||||
$(top_srcdir)/config/kernel-create-umode-t.m4 \
|
||||
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
|
||||
$(top_srcdir)/config/kernel-evict-inode.m4 \
|
||||
$(top_srcdir)/config/kernel-fallocate.m4 \
|
||||
$(top_srcdir)/config/kernel-fmode-t.m4 \
|
||||
$(top_srcdir)/config/kernel-fsync.m4 \
|
||||
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
|
||||
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
|
||||
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
|
||||
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
|
||||
$(top_srcdir)/config/kernel-mount-nodev.m4 \
|
||||
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
|
||||
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
|
||||
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
|
||||
$(top_srcdir)/config/kernel-security-inode-init.m4 \
|
||||
$(top_srcdir)/config/kernel-set-nlink.m4 \
|
||||
$(top_srcdir)/config/kernel-show-options.m4 \
|
||||
$(top_srcdir)/config/kernel-shrink.m4 \
|
||||
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
|
||||
$(top_srcdir)/config/kernel-xattr-handler.m4 \
|
||||
$(top_srcdir)/config/kernel.m4 \
|
||||
$(top_srcdir)/config/user-arch.m4 \
|
||||
$(top_srcdir)/config/user-frame-larger-than.m4 \
|
||||
$(top_srcdir)/config/user-ioctl.m4 \
|
||||
$(top_srcdir)/config/user-libblkid.m4 \
|
||||
$(top_srcdir)/config/user-libuuid.m4 \
|
||||
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
|
||||
$(top_srcdir)/config/user-selinux.m4 \
|
||||
$(top_srcdir)/config/user-udev.m4 \
|
||||
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
|
||||
$(top_srcdir)/config/zfs-build.m4 \
|
||||
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
|
||||
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
|
||||
$(ACLOCAL_M4)
|
||||
mkinstalldirs = $(install_sh) -d
|
||||
CONFIG_HEADER = $(top_builddir)/zfs_config.h
|
||||
CONFIG_CLEAN_FILES =
|
||||
CONFIG_CLEAN_VPATH_FILES =
|
||||
AM_V_GEN = $(am__v_GEN_$(V))
|
||||
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
|
||||
am__v_GEN_0 = @echo " GEN " $@;
|
||||
AM_V_at = $(am__v_at_$(V))
|
||||
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
|
||||
am__v_at_0 = @
|
||||
SOURCES =
|
||||
DIST_SOURCES =
|
||||
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
|
||||
am__vpath_adj = case $$p in \
|
||||
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
|
||||
*) f=$$p;; \
|
||||
esac;
|
||||
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
|
||||
am__install_max = 40
|
||||
am__nobase_strip_setup = \
|
||||
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
|
||||
am__nobase_strip = \
|
||||
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
|
||||
am__nobase_list = $(am__nobase_strip_setup); \
|
||||
for p in $$list; do echo "$$p $$p"; done | \
|
||||
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
|
||||
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
|
||||
if (++n[$$2] == $(am__install_max)) \
|
||||
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
|
||||
END { for (dir in files) print dir, files[dir] }'
|
||||
am__base_list = \
|
||||
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
|
||||
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
|
||||
man5dir = $(mandir)/man5
|
||||
am__installdirs = "$(DESTDIR)$(man5dir)"
|
||||
NROFF = nroff
|
||||
MANS = $(man_MANS)
|
||||
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
|
||||
ACLOCAL = @ACLOCAL@
|
||||
ALIEN = @ALIEN@
|
||||
ALIEN_VERSION = @ALIEN_VERSION@
|
||||
AMTAR = @AMTAR@
|
||||
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
|
||||
AR = @AR@
|
||||
AUTOCONF = @AUTOCONF@
|
||||
AUTOHEADER = @AUTOHEADER@
|
||||
AUTOMAKE = @AUTOMAKE@
|
||||
AWK = @AWK@
|
||||
CC = @CC@
|
||||
CCAS = @CCAS@
|
||||
CCASDEPMODE = @CCASDEPMODE@
|
||||
CCASFLAGS = @CCASFLAGS@
|
||||
CCDEPMODE = @CCDEPMODE@
|
||||
CFLAGS = @CFLAGS@
|
||||
CPP = @CPP@
|
||||
CPPFLAGS = @CPPFLAGS@
|
||||
CYGPATH_W = @CYGPATH_W@
|
||||
DEBUG_CFLAGS = @DEBUG_CFLAGS@
|
||||
DEBUG_DMU_TX = @DEBUG_DMU_TX@
|
||||
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
|
||||
DEBUG_ZFS = @DEBUG_ZFS@
|
||||
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
|
||||
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
|
||||
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
|
||||
DEFS = @DEFS@
|
||||
DEPDIR = @DEPDIR@
|
||||
DPKG = @DPKG@
|
||||
DPKGBUILD = @DPKGBUILD@
|
||||
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
|
||||
DPKG_VERSION = @DPKG_VERSION@
|
||||
DSYMUTIL = @DSYMUTIL@
|
||||
DUMPBIN = @DUMPBIN@
|
||||
ECHO_C = @ECHO_C@
|
||||
ECHO_N = @ECHO_N@
|
||||
ECHO_T = @ECHO_T@
|
||||
EGREP = @EGREP@
|
||||
EXEEXT = @EXEEXT@
|
||||
FGREP = @FGREP@
|
||||
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
|
||||
GREP = @GREP@
|
||||
HAVE_ALIEN = @HAVE_ALIEN@
|
||||
HAVE_DPKG = @HAVE_DPKG@
|
||||
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
|
||||
HAVE_MAKEPKG = @HAVE_MAKEPKG@
|
||||
HAVE_PACMAN = @HAVE_PACMAN@
|
||||
HAVE_RPM = @HAVE_RPM@
|
||||
HAVE_RPMBUILD = @HAVE_RPMBUILD@
|
||||
INSTALL = @INSTALL@
|
||||
INSTALL_DATA = @INSTALL_DATA@
|
||||
INSTALL_PROGRAM = @INSTALL_PROGRAM@
|
||||
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
||||
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
|
||||
KERNELCPPFLAGS = @KERNELCPPFLAGS@
|
||||
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
|
||||
LD = @LD@
|
||||
LDFLAGS = @LDFLAGS@
|
||||
LIBBLKID = @LIBBLKID@
|
||||
LIBOBJS = @LIBOBJS@
|
||||
LIBS = @LIBS@
|
||||
LIBSELINUX = @LIBSELINUX@
|
||||
LIBTOOL = @LIBTOOL@
|
||||
LIBUUID = @LIBUUID@
|
||||
LINUX = @LINUX@
|
||||
LINUX_OBJ = @LINUX_OBJ@
|
||||
LINUX_SYMBOLS = @LINUX_SYMBOLS@
|
||||
LINUX_VERSION = @LINUX_VERSION@
|
||||
LIPO = @LIPO@
|
||||
LN_S = @LN_S@
|
||||
LTLIBOBJS = @LTLIBOBJS@
|
||||
MAINT = @MAINT@
|
||||
MAKEINFO = @MAKEINFO@
|
||||
MAKEPKG = @MAKEPKG@
|
||||
MAKEPKG_VERSION = @MAKEPKG_VERSION@
|
||||
MKDIR_P = @MKDIR_P@
|
||||
NM = @NM@
|
||||
NMEDIT = @NMEDIT@
|
||||
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
|
||||
OBJDUMP = @OBJDUMP@
|
||||
OBJEXT = @OBJEXT@
|
||||
OTOOL = @OTOOL@
|
||||
OTOOL64 = @OTOOL64@
|
||||
PACKAGE = @PACKAGE@
|
||||
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
|
||||
PACKAGE_NAME = @PACKAGE_NAME@
|
||||
PACKAGE_STRING = @PACKAGE_STRING@
|
||||
PACKAGE_TARNAME = @PACKAGE_TARNAME@
|
||||
PACKAGE_VERSION = @PACKAGE_VERSION@
|
||||
PACMAN = @PACMAN@
|
||||
PACMAN_VERSION = @PACMAN_VERSION@
|
||||
PATH_SEPARATOR = @PATH_SEPARATOR@
|
||||
RANLIB = @RANLIB@
|
||||
RPM = @RPM@
|
||||
RPMBUILD = @RPMBUILD@
|
||||
RPMBUILD_VERSION = @RPMBUILD_VERSION@
|
||||
RPM_VERSION = @RPM_VERSION@
|
||||
SED = @SED@
|
||||
SET_MAKE = @SET_MAKE@
|
||||
SHELL = @SHELL@
|
||||
SPL = @SPL@
|
||||
SPL_OBJ = @SPL_OBJ@
|
||||
SPL_SYMBOLS = @SPL_SYMBOLS@
|
||||
SPL_VERSION = @SPL_VERSION@
|
||||
STRIP = @STRIP@
|
||||
TARGET_ASM_DIR = @TARGET_ASM_DIR@
|
||||
VENDOR = @VENDOR@
|
||||
VERSION = @VERSION@
|
||||
ZFS_CONFIG = @ZFS_CONFIG@
|
||||
ZFS_META_ALIAS = @ZFS_META_ALIAS@
|
||||
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
|
||||
ZFS_META_DATA = @ZFS_META_DATA@
|
||||
ZFS_META_LICENSE = @ZFS_META_LICENSE@
|
||||
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
|
||||
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
|
||||
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
|
||||
ZFS_META_NAME = @ZFS_META_NAME@
|
||||
ZFS_META_RELEASE = @ZFS_META_RELEASE@
|
||||
ZFS_META_VERSION = @ZFS_META_VERSION@
|
||||
ZLIB = @ZLIB@
|
||||
abs_builddir = @abs_builddir@
|
||||
abs_srcdir = @abs_srcdir@
|
||||
abs_top_builddir = @abs_top_builddir@
|
||||
abs_top_srcdir = @abs_top_srcdir@
|
||||
ac_ct_CC = @ac_ct_CC@
|
||||
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
|
||||
am__include = @am__include@
|
||||
am__leading_dot = @am__leading_dot@
|
||||
am__quote = @am__quote@
|
||||
am__tar = @am__tar@
|
||||
am__untar = @am__untar@
|
||||
bindir = @bindir@
|
||||
build = @build@
|
||||
build_alias = @build_alias@
|
||||
build_cpu = @build_cpu@
|
||||
build_os = @build_os@
|
||||
build_vendor = @build_vendor@
|
||||
builddir = @builddir@
|
||||
datadir = @datadir@
|
||||
datarootdir = @datarootdir@
|
||||
docdir = @docdir@
|
||||
dvidir = @dvidir@
|
||||
exec_prefix = @exec_prefix@
|
||||
host = @host@
|
||||
host_alias = @host_alias@
|
||||
host_cpu = @host_cpu@
|
||||
host_os = @host_os@
|
||||
host_vendor = @host_vendor@
|
||||
htmldir = @htmldir@
|
||||
includedir = @includedir@
|
||||
infodir = @infodir@
|
||||
install_sh = @install_sh@
|
||||
libdir = @libdir@
|
||||
libexecdir = @libexecdir@
|
||||
localedir = @localedir@
|
||||
localstatedir = @localstatedir@
|
||||
lt_ECHO = @lt_ECHO@
|
||||
mandir = @mandir@
|
||||
mkdir_p = @mkdir_p@
|
||||
oldincludedir = @oldincludedir@
|
||||
pdfdir = @pdfdir@
|
||||
prefix = @prefix@
|
||||
program_transform_name = @program_transform_name@
|
||||
psdir = @psdir@
|
||||
sbindir = @sbindir@
|
||||
sharedstatedir = @sharedstatedir@
|
||||
srcdir = @srcdir@
|
||||
sysconfdir = @sysconfdir@
|
||||
target = @target@
|
||||
target_alias = @target_alias@
|
||||
target_cpu = @target_cpu@
|
||||
target_os = @target_os@
|
||||
target_vendor = @target_vendor@
|
||||
top_build_prefix = @top_build_prefix@
|
||||
top_builddir = @top_builddir@
|
||||
top_srcdir = @top_srcdir@
|
||||
udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
man_MANS = vdev_id.conf.5
|
||||
EXTRA_DIST = $(man_MANS)
|
||||
all: all-am
|
||||
|
||||
.SUFFIXES:
|
||||
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
|
||||
@for dep in $?; do \
|
||||
case '$(am__configure_deps)' in \
|
||||
*$$dep*) \
|
||||
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
|
||||
&& { if test -f $@; then exit 0; else break; fi; }; \
|
||||
exit 1;; \
|
||||
esac; \
|
||||
done; \
|
||||
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/man5/Makefile'; \
|
||||
$(am__cd) $(top_srcdir) && \
|
||||
$(AUTOMAKE) --gnu man/man5/Makefile
|
||||
.PRECIOUS: Makefile
|
||||
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
|
||||
@case '$?' in \
|
||||
*config.status*) \
|
||||
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
|
||||
*) \
|
||||
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
|
||||
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
|
||||
esac;
|
||||
|
||||
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
|
||||
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
|
||||
|
||||
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
|
||||
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
|
||||
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
|
||||
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
|
||||
$(am__aclocal_m4_deps):
|
||||
|
||||
mostlyclean-libtool:
|
||||
-rm -f *.lo
|
||||
|
||||
clean-libtool:
|
||||
-rm -rf .libs _libs
|
||||
install-man5: $(man_MANS)
|
||||
@$(NORMAL_INSTALL)
|
||||
test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
|
||||
@list=''; test -n "$(man5dir)" || exit 0; \
|
||||
{ for i in $$list; do echo "$$i"; done; \
|
||||
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
|
||||
sed -n '/\.5[a-z]*$$/p'; \
|
||||
} | while read p; do \
|
||||
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
|
||||
echo "$$d$$p"; echo "$$p"; \
|
||||
done | \
|
||||
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
|
||||
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
|
||||
sed 'N;N;s,\n, ,g' | { \
|
||||
list=; while read file base inst; do \
|
||||
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
|
||||
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
|
||||
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
|
||||
fi; \
|
||||
done; \
|
||||
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
|
||||
while read files; do \
|
||||
test -z "$$files" || { \
|
||||
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
|
||||
$(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
|
||||
done; }
|
||||
|
||||
uninstall-man5:
|
||||
@$(NORMAL_UNINSTALL)
|
||||
@list=''; test -n "$(man5dir)" || exit 0; \
|
||||
files=`{ for i in $$list; do echo "$$i"; done; \
|
||||
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
|
||||
sed -n '/\.5[a-z]*$$/p'; \
|
||||
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
|
||||
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
|
||||
test -z "$$files" || { \
|
||||
echo " ( cd '$(DESTDIR)$(man5dir)' && rm -f" $$files ")"; \
|
||||
cd "$(DESTDIR)$(man5dir)" && rm -f $$files; }
|
||||
tags: TAGS
|
||||
TAGS:
|
||||
|
||||
ctags: CTAGS
|
||||
CTAGS:
|
||||
|
||||
|
||||
distdir: $(DISTFILES)
|
||||
@list='$(MANS)'; if test -n "$$list"; then \
|
||||
list=`for p in $$list; do \
|
||||
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
|
||||
if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
|
||||
if test -n "$$list" && \
|
||||
grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
|
||||
echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
|
||||
grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
|
||||
echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
|
||||
echo " typically \`make maintainer-clean' will remove them" >&2; \
|
||||
exit 1; \
|
||||
else :; fi; \
|
||||
else :; fi
|
||||
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
||||
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
|
||||
list='$(DISTFILES)'; \
|
||||
dist_files=`for file in $$list; do echo $$file; done | \
|
||||
sed -e "s|^$$srcdirstrip/||;t" \
|
||||
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
|
||||
case $$dist_files in \
|
||||
*/*) $(MKDIR_P) `echo "$$dist_files" | \
|
||||
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
|
||||
sort -u` ;; \
|
||||
esac; \
|
||||
for file in $$dist_files; do \
|
||||
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
|
||||
if test -d $$d/$$file; then \
|
||||
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
|
||||
if test -d "$(distdir)/$$file"; then \
|
||||
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
|
||||
fi; \
|
||||
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
|
||||
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
|
||||
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
|
||||
fi; \
|
||||
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
|
||||
else \
|
||||
test -f "$(distdir)/$$file" \
|
||||
|| cp -p $$d/$$file "$(distdir)/$$file" \
|
||||
|| exit 1; \
|
||||
fi; \
|
||||
done
|
||||
check-am: all-am
|
||||
check: check-am
|
||||
all-am: Makefile $(MANS)
|
||||
installdirs:
|
||||
for dir in "$(DESTDIR)$(man5dir)"; do \
|
||||
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
|
||||
done
|
||||
install: install-am
|
||||
install-exec: install-exec-am
|
||||
install-data: install-data-am
|
||||
uninstall: uninstall-am
|
||||
|
||||
install-am: all-am
|
||||
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
||||
|
||||
installcheck: installcheck-am
|
||||
install-strip:
|
||||
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
|
||||
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
|
||||
`test -z '$(STRIP)' || \
|
||||
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
|
||||
mostlyclean-generic:
|
||||
|
||||
clean-generic:
|
||||
|
||||
distclean-generic:
|
||||
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
|
||||
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
|
||||
|
||||
maintainer-clean-generic:
|
||||
@echo "This command is intended for maintainers to use"
|
||||
@echo "it deletes files that may require special tools to rebuild."
|
||||
clean: clean-am
|
||||
|
||||
clean-am: clean-generic clean-libtool mostlyclean-am
|
||||
|
||||
distclean: distclean-am
|
||||
-rm -f Makefile
|
||||
distclean-am: clean-am distclean-generic
|
||||
|
||||
dvi: dvi-am
|
||||
|
||||
dvi-am:
|
||||
|
||||
html: html-am
|
||||
|
||||
html-am:
|
||||
|
||||
info: info-am
|
||||
|
||||
info-am:
|
||||
|
||||
install-data-am: install-data-local install-man
|
||||
|
||||
install-dvi: install-dvi-am
|
||||
|
||||
install-dvi-am:
|
||||
|
||||
install-exec-am:
|
||||
|
||||
install-html: install-html-am
|
||||
|
||||
install-html-am:
|
||||
|
||||
install-info: install-info-am
|
||||
|
||||
install-info-am:
|
||||
|
||||
install-man: install-man5
|
||||
|
||||
install-pdf: install-pdf-am
|
||||
|
||||
install-pdf-am:
|
||||
|
||||
install-ps: install-ps-am
|
||||
|
||||
install-ps-am:
|
||||
|
||||
installcheck-am:
|
||||
|
||||
maintainer-clean: maintainer-clean-am
|
||||
-rm -f Makefile
|
||||
maintainer-clean-am: distclean-am maintainer-clean-generic
|
||||
|
||||
mostlyclean: mostlyclean-am
|
||||
|
||||
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
|
||||
|
||||
pdf: pdf-am
|
||||
|
||||
pdf-am:
|
||||
|
||||
ps: ps-am
|
||||
|
||||
ps-am:
|
||||
|
||||
uninstall-am: uninstall-man
|
||||
|
||||
uninstall-man: uninstall-man5
|
||||
|
||||
.MAKE: install-am install-strip
|
||||
|
||||
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
|
||||
distclean distclean-generic distclean-libtool distdir dvi \
|
||||
dvi-am html html-am info info-am install install-am \
|
||||
install-data install-data-am install-data-local install-dvi \
|
||||
install-dvi-am install-exec install-exec-am install-html \
|
||||
install-html-am install-info install-info-am install-man \
|
||||
install-man5 install-pdf install-pdf-am install-ps \
|
||||
install-ps-am install-strip installcheck installcheck-am \
|
||||
installdirs maintainer-clean maintainer-clean-generic \
|
||||
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
|
||||
ps ps-am uninstall uninstall-am uninstall-man uninstall-man5
|
||||
|
||||
|
||||
install-data-local:
|
||||
$(INSTALL) -d -m 0755 "$(DESTDIR)$(mandir)/man5"
|
||||
|
||||
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
||||
# Otherwise a system limit (for SysV at least) may be exceeded.
|
||||
.NOEXPORT:
|
||||
160
man/man5/vdev_id.conf.5
Normal file
160
man/man5/vdev_id.conf.5
Normal file
@ -0,0 +1,160 @@
|
||||
.TH vdev_id.conf 5
|
||||
.SH NAME
|
||||
vdev_id.conf \- Configuration file for vdev_id
|
||||
.SH DESCRIPTION
|
||||
.I vdev_id.conf
|
||||
is the configuration file for
|
||||
.BR vdev_id (8).
|
||||
It controls the default behavior of
|
||||
.BR vdev_id (8)
|
||||
while it is mapping a disk device name to an alias.
|
||||
.PP
|
||||
The
|
||||
.I vdev_id.conf
|
||||
file uses a simple format consisting of a keyword followed by one or
|
||||
more values on a single line. Any line not beginning with a recognized
|
||||
keyword is ignored. Comments may optionally begin with a hash
|
||||
character.
|
||||
|
||||
The following keywords and values are used.
|
||||
.TP
|
||||
\fIchannel\fR [pci_slot] <port> <name>
|
||||
Maps a physical path to a channel name (typically representing a single
|
||||
disk enclosure).
|
||||
|
||||
\fIpci_slot\fR - specifies the PCI SLOT of the HBA
|
||||
hosting the disk enclosure being mapped, as found in the output of
|
||||
.BR lspci (8).
|
||||
This argument is not used in sas_switch mode.
|
||||
|
||||
\fIport\fR - specifies the numeric identifier of the HBA or SAS switch port
|
||||
connected to the disk enclosure being mapped.
|
||||
|
||||
\fIname\fR - specifies the name of the channel.
|
||||
|
||||
.TP
|
||||
\fIslot\fR <old> <new>
|
||||
Maps a disk slot number as reported by the operating system
|
||||
to an alternative slot number.
|
||||
.TP
|
||||
\fImultipath\fR <yes|no>
|
||||
Specifies whether
|
||||
.BR vdev_id (8)
|
||||
will handle only dm-multipath devices. If set to "yes" then
|
||||
.BR vdev_id (8)
|
||||
will examine the first running component disk of a dm-multipath
|
||||
device as listed by the
|
||||
.BR multipath (8)
|
||||
command to determine the physical path.
|
||||
.TP
|
||||
\fItopology\fR <sas_direct|sas_switch>
|
||||
Identifies a physical topology that governs how physical paths are
|
||||
mapped to channels.
|
||||
|
||||
\fIsas_direct\fR - in this mode a channel is uniquely identified by
|
||||
a PCI slot and a HBA port number
|
||||
|
||||
\fIsas_switch\fR - in this mode a channel is uniquely identified by
|
||||
a SAS switch port number
|
||||
|
||||
.TP
|
||||
\fIphys_per_port\fR <num>
|
||||
Specifies the number of PHY devices are associated with a SAS HBA port or SAS
|
||||
switch port.
|
||||
.BR vdev_id (8)
|
||||
internally uses this value to determine which HBA or switch port a
|
||||
device is connected to. The default is 4.
|
||||
.SH EXAMPLES
|
||||
A non-multipath configuration with direct-attached SAS enclosures and an
|
||||
arbitrary slot re-mapping.
|
||||
.P
|
||||
multipath no
|
||||
.br
|
||||
topology sas_direct
|
||||
.br
|
||||
phys_per_port 4
|
||||
.br
|
||||
|
||||
.br
|
||||
# PCI_SLOT HBA PORT CHANNEL NAME
|
||||
.br
|
||||
channel 85:00.0 1 A
|
||||
.br
|
||||
channel 85:00.0 0 B
|
||||
.br
|
||||
channel 86:00.0 1 C
|
||||
.br
|
||||
channel 86:00.0 0 D
|
||||
.br
|
||||
|
||||
.br
|
||||
# Linux Mapped
|
||||
.br
|
||||
# Slot Slot
|
||||
.br
|
||||
slot 1 7
|
||||
.br
|
||||
slot 2 10
|
||||
.br
|
||||
slot 3 3
|
||||
.br
|
||||
slot 4 6
|
||||
.br
|
||||
slot 5 2
|
||||
.br
|
||||
slot 6 8
|
||||
.br
|
||||
slot 7 1
|
||||
.br
|
||||
slot 8 4
|
||||
.br
|
||||
slot 9 9
|
||||
.br
|
||||
slot 10 5
|
||||
.br
|
||||
.P
|
||||
A SAS-switch topology. Note that the
|
||||
.I channel
|
||||
keyword takes only two arguments in this example.
|
||||
.P
|
||||
topology sas_switch
|
||||
.br
|
||||
|
||||
.br
|
||||
# SWITCH PORT CHANNEL NAME
|
||||
.br
|
||||
channel 1 A
|
||||
.br
|
||||
channel 2 B
|
||||
.br
|
||||
channel 3 C
|
||||
.br
|
||||
channel 4 D
|
||||
.br
|
||||
.P
|
||||
A multipath configuration. Note that channel names have multiple
|
||||
definitions - one per physical path.
|
||||
.P
|
||||
multipath yes
|
||||
.br
|
||||
|
||||
.br
|
||||
# PCI_SLOT HBA PORT CHANNEL NAME
|
||||
.br
|
||||
channel 85:00.0 1 A
|
||||
.br
|
||||
channel 85:00.0 0 B
|
||||
.br
|
||||
channel 86:00.0 1 A
|
||||
.br
|
||||
channel 86:00.0 0 B
|
||||
.br
|
||||
.P
|
||||
|
||||
.SH FILES
|
||||
.TP
|
||||
.I /etc/zfs/vdev_id.conf
|
||||
The configuration file for
|
||||
.BR vdev_id (8).
|
||||
.SH SEE ALSO
|
||||
.BR vdev_id (8)
|
||||
@ -1,4 +1,4 @@
|
||||
man_MANS = zdb.8 zfs.8 zpool.8
|
||||
man_MANS = vdev_id.8 zdb.8 zfs.8 zpool.8
|
||||
EXTRA_DIST = $(man_MANS)
|
||||
|
||||
install-data-local:
|
||||
|
||||
@ -313,7 +313,7 @@ top_builddir = @top_builddir@
|
||||
top_srcdir = @top_srcdir@
|
||||
udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
man_MANS = zdb.8 zfs.8 zpool.8
|
||||
man_MANS = vdev_id.8 zdb.8 zfs.8 zpool.8
|
||||
EXTRA_DIST = $(man_MANS)
|
||||
all: all-am
|
||||
|
||||
|
||||
72
man/man8/vdev_id.8
Normal file
72
man/man8/vdev_id.8
Normal file
@ -0,0 +1,72 @@
|
||||
.TH vdev_id 8
|
||||
.SH NAME
|
||||
vdev_id \- generate user-friendly names for JBOD disks
|
||||
.SH SYNOPSIS
|
||||
.LP
|
||||
.nf
|
||||
\fBvdev_id\fR <-d dev> [-c config_file] [-g sas_direct|sas_switch]
|
||||
[-m] [-p phys_per_port]
|
||||
\fBvdev_id\fR -h
|
||||
.fi
|
||||
.SH DESCRIPTION
|
||||
The \fBvdev_id\fR command is a udev helper which parses the file
|
||||
.BR /etc/zfs/vdev_id.conf (5)
|
||||
to map a physical path in a storage topology to a channel name. The
|
||||
channel name is combined with a disk enclosure slot number to create an
|
||||
alias that reflects the physical location of the drive. This is
|
||||
particularly helpful when it comes to tasks like replacing failed
|
||||
drives. Slot numbers may also be re-mapped in case the default
|
||||
numbering is unsatisfactory. The drive aliases will be created as
|
||||
symbolic links in /dev/disk/by-vdev.
|
||||
|
||||
The only currently supported topologies are sas_direct and
|
||||
sas_switch. A multipath mode is supported in which dm-mpath
|
||||
devices are handled by examining the first-listed running
|
||||
component disk as reported by the
|
||||
.BR multipath (8)
|
||||
command. In multipath mode the configuration file should contain a
|
||||
channel definition with the same name for each path to a given
|
||||
enclosure.
|
||||
|
||||
.SH OPTIONS
|
||||
.TP
|
||||
\fB\-c\fR <config_file>
|
||||
Specifies the path to an alternate configuration file. The default is
|
||||
/etc/zfs/vdev_id.conf.
|
||||
.TP
|
||||
\fB\-d\fR <device>
|
||||
This is the only mandatory argument. Specifies the name of a device
|
||||
in /dev, i.e. "sda".
|
||||
.TP
|
||||
\fB\-g\fR <sas_direct|sas_switch>
|
||||
Identifies a physical topology that governs how physical paths are
|
||||
mapped to channels.
|
||||
|
||||
\fIsas_direct\fR - in this mode a channel is uniquely identified by
|
||||
a PCI slot and a HBA port number
|
||||
|
||||
\fIsas_switch\fR - in this mode a channel is uniquely identified by
|
||||
a SAS switch port number
|
||||
.TP
|
||||
\fB\-m\fR
|
||||
Specifies that
|
||||
.BR vdev_id (8)
|
||||
will handle only dm-multipath devices. If set to "yes" then
|
||||
.BR vdev_id (8)
|
||||
will examine the first running component disk of a dm-multipath
|
||||
device as listed by the
|
||||
.BR multipath (8)
|
||||
command to determine the physical path.
|
||||
.TP
|
||||
\fB\-p\fR <phys_per_port>
|
||||
Specifies the number of PHY devices associated with a SAS HBA port or SAS
|
||||
switch port.
|
||||
.BR vdev_id (8)
|
||||
internally uses this value to determine which HBA or switch port a
|
||||
device is connected to. The default is 4.
|
||||
.TP
|
||||
\fB\-h\fR
|
||||
Print a usage summary.
|
||||
.SH SEE ALSO
|
||||
.LP
|
||||
\fBvdev_id.conf\fR(5)
|
||||
9
udev/rules.d/60-vdev.rules.in
Normal file
9
udev/rules.d/60-vdev.rules.in
Normal file
@ -0,0 +1,9 @@
|
||||
#
|
||||
# /lib/udev/rules.d/60-vdev.rules
|
||||
#
|
||||
|
||||
ENV{DEVTYPE}=="disk", IMPORT{program}="/lib/udev/vdev_id -d %k"
|
||||
|
||||
KERNEL=="*[!0-9]", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
|
||||
KERNEL=="*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="partition", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}-part%n"
|
||||
KERNEL=="dm-[0-9]*", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
|
||||
@ -1,9 +1,11 @@
|
||||
udevrule_DATA = \
|
||||
$(top_srcdir)/udev/rules.d/60-vdev.rules \
|
||||
$(top_srcdir)/udev/rules.d/60-zpool.rules \
|
||||
$(top_srcdir)/udev/rules.d/60-zvol.rules \
|
||||
$(top_srcdir)/udev/rules.d/90-zfs.rules
|
||||
|
||||
EXTRA_DIST = \
|
||||
$(top_srcdir)/udev/rules.d/60-vdev.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/60-zpool.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/60-zvol.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/90-zfs.rules.in
|
||||
|
||||
@ -313,11 +313,13 @@ top_srcdir = @top_srcdir@
|
||||
udevdir = @udevdir@
|
||||
udevruledir = @udevruledir@
|
||||
udevrule_DATA = \
|
||||
$(top_srcdir)/udev/rules.d/60-vdev.rules \
|
||||
$(top_srcdir)/udev/rules.d/60-zpool.rules \
|
||||
$(top_srcdir)/udev/rules.d/60-zvol.rules \
|
||||
$(top_srcdir)/udev/rules.d/90-zfs.rules
|
||||
|
||||
EXTRA_DIST = \
|
||||
$(top_srcdir)/udev/rules.d/60-vdev.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/60-zpool.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/60-zvol.rules.in \
|
||||
$(top_srcdir)/udev/rules.d/90-zfs.rules.in
|
||||
|
||||
@ -79,6 +79,7 @@ rm -rf $RPM_BUILD_ROOT
|
||||
%{_sbindir}/*
|
||||
%{_bindir}/*
|
||||
%{_libdir}/*
|
||||
%{_mandir}/man5/*
|
||||
%{_mandir}/man8/*
|
||||
%{_sysconfdir}/init.d/*
|
||||
%{_sysconfdir}/zfs/*
|
||||
|
||||
Loading…
Reference in New Issue
Block a user