A single slow responding disk can affect the overall read
performance of a raidz group. When a raidz child disk is
determined to be a persistent slow outlier, then have it
sit out during reads for a period of time. The raidz group
can use parity to reconstruct the data that was skipped.
Each time a slow disk is placed into a sit out period, its
`vdev_stat.vs_slow_ios count` is incremented and a zevent
class `ereport.fs.zfs.delay` is posted.
The length of the sit out period can be changed using the
`raid_read_sit_out_secs` module parameter. Setting it to
zero disables slow outlier detection.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Contributions-by: Don Brady <don.brady@klarasystems.com>
Contributions-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17227
Print a warning if you're attempting to run a ZTS test that calls
'user_run', and the ephemeral user doesn't have permissions to
access the test binaries.
This can happen if you're running ZTS from a local git repo. In
that case the test user (say, 'testuser1') may need access to the
ZTS binaries in:
/home/<your_username>/zfs/tests/zfs-tests/bin/
... but 'testuser1' doesn't have permission to enter your home dir:
/home/<your_username>
The warning will help alert users to what is going on. This will
not be an issue when ZTS is actually installed on the system
(via 'make install' or from packages).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17721
test->id is a uint64_t, not a long.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: ConnectWise
Closes#17707
When attempting to debug performance problems on large systems, one of
the major factors that affect performance is free space
fragmentation. This heavily affects the allocation process, which is an
area of active development in ZFS. Unfortunately, fragmenting a large
pool for testing purposes is time consuming; it usually involves filling
the pool and then repeatedly overwriting data until the free space
becomes fragmented, which can take many hours. And even if the time is
available, artificial workloads rarely generate the same fragmentation
patterns as the natural workloads they're attempting to mimic.
This patch has two parts. First, in zdb, we add the ability to export
the full allocation map of the pool. It iterates over each vdev,
printing every allocated segment in the ms_allocatable range tree. This
can be done while the pool is online, though in that case the allocation
map may actually be from several different TXGs as new ones are loaded
on demand.
The second is a new subcommand for zhack, zhack metaslab leak (and its
supporting kernel changes). This is a zhack subcommand that imports a
pool and then modified the range trees of the metaslabs, allowing the
sync process to write them out normall. It does not currently store
those allocations anywhere to make them reversible, and there is no
corresponding free subcommand (which would be extremely dangerous); this
is an irreversible process, only intended for performance testing. The
only way to reclaim the space afterwards is to destroy the pool or roll
back to a checkpoint.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17576
This commit synchronizes the debian packaging files with the distro
version (also maintained by me) as much as possible.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Colm Buckley <colm@tuatha.org>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17712
While rw_destroy() may do nothing on Linux, we still want to make sure
that we don't have any holders outstanding like we do for mutexes.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17718
We only have extremely narrow uses, so move it all into a single
function that does only what we need, with and without d_set_d_op().
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17621
Accidentally removed calls in ed048fdc5b.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17621
fault_limits would often hit the 10min timeout and be killed on Fedora
41-42. Investigation showed that the 'fill_fs' portion of the test,
which would fill the pool with junk data before vdev replacement, was
writing highly compressible data (~126x), which would have taxed the
CPUs, potentially causing the timeout.
The fix is to write random data and reduce the number of writes.
This has an added benefit that more real data being is written to the
pool (~1GB) vs the old way (~300-400MB). It also speeds up the test.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17709
This is one problem currently preventing OpenZFS from building on
FreeBSD/i386.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: ConnectWise
Closes#17704
GCC complains about casting a 64-bit integer to a 32-bit pointer.
Originally committed downstream as
https://github.com/freebsd/freebsd-src/commit/2d76470b701
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: ConnectWise
Closes#17706
FreeBSD now has a pathconf name called _PC_CLONE_BLKSIZE
which is the block size supported for block cloning for
the file system. Since ZFS's block size varies per file,
return the largest size likely to be used, or zero if block
cloning is not supported.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17645
If the target already exists, lt will fail. Force it to recreate the
symlinks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17702
If we call ddt_log_load() for legacy ddt, we will end up going into
ddt_log_update_stats() and filling uninitialized value into ddo_dspace.
This value will then get added to dedup_table_size during
ddt_get_dedup_object_stats().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17019Closes#17699
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: Chunwei Chen <david.chen@nutanix.com>
They will become zarcsummary and zarcstat in 2.4.0.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16357Closes#17695
Otherwise it might become `if [ == "" ]` which is ill-formed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17695
Because GitHub creates a merge commit on top of real head, so the check
on HEAD will fail regardlessly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17695
If ARCH environment variable is set it can cause the failure of the
kernel modules check during the configure step. The resulting error
will be confusing, and may looks like this:
> checking for kernel config option compatibility... done
> checking whether CONFIG_MODULES is defined... no
> configure: error:
> *** This kernel does not include the required loadable module
> *** support!
Detect when ARCH is print a warning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Maksym Shkolnyi <maksym.shkolnyi@workato.com>
Closes#17680
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17690
LLVM-21 enables -Wuninitialized-const-pointer which results in the
following compiler warning and the bdev_file_open_by_path() interface
not being detected for 6.9 and newer kernels. The blk_holder_ops
are not used by the ZFS code so we can safely use a NULL argument
for this check.
bdev_file_open_by_path/bdev_file_open_by_path.c:110:54: error:
variable 'h' is uninitialized when passed as a const pointer
argument here [-Werror,-Wuninitialized-const-pointer]
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17682Closes#17684
glibc includes linux/stat.h for statx, but musl defines its own statx
struct and associated constants, which does not include STATX_MNT_ID
yet. Thus, including linux/stat.h directly should be avoided for
maximum libc compatibility.
Tested on:
- glibc: x86_64, i686, aarch64, armv7l, armv6l
- musl: x86_64, aarch64, armv7l, armv6l
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-By: Achill Gilgenast <achill@achill.org>
Signed-off-by: classabbyamp <dev@placeviolette.net>
Closes#17675
As described in https://github.com/freebsd/freebsd-src/pull/1305,
FreeBSD's installer defaults to zroot/home for user home directories.
For FreeBSD only, set the default prefix for pam_zfs_key to match.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Eric A. Borisch <eborisch@gmail.com>
Closes#17600
Add an openzfs-2.4 compatibility file for the next release.
While there are no compatibility difference between Linux and
FreeBSD for 2.4 symlinks for the -linux and -freebsd names are
created for any scripts expecting that convention.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: ofthesun9 <olivier@ofthesun.net>
Closes#17672Closes#17673
The sorting logic is all in cmd/zfs/zfs_iter.c. I borrowed
where I could from the comments in the source code, but please
note that the comment to zfs_sort() is a little imprecise, or at
least incomplete, because it doesn't give any indication of the
chronological sort that will be used by default for snapshots in
zfs_compare().
While adding this description, I took the liberty to copy-edit
the rest of the file lightly.
In those edits, I've removed "If specified, you can list
property information by the absolute pathname or the relative
pathname" because, in context, it seems more confusing than
helpful.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Shawn Bayern <sbayern@law.fsu.edu>
Closes#15713Closes#15869
If $KERNEL_CC was not defined, configure status output would print an
empty string where the kernel compiler should have been. Fix this and
simplify the code generally.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes#16997
Add a test case to reproduce issue #17277:
1. Make a pool
2. Write a file to the pool
3. Mount the file as a loopback device
4. Make an XFS filesystem on the loopback device
5. Mount the XFS filesystem... <hangs>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #17277Closes#17329
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#17665
The concurrent execution of feature_sync() can lead to a panic due
to an unprotected update of the feature refcount. Resolve this by
using the spa->spa_feat_stats_lock to synchronize the update of the
refcount.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#17184Closes#17632
Update the zfsunlock initramfs hook to provide instructions on how
to unlock the root filesystem when appropriate. The intent is to
make the dropbear ssh MOTD more user friendly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Cong Zhang <13283869+congzhangzh@users.noreply.github.com>
Closes#17661Closes#17662
zfsctl_root_readdir(): properly set eof.
readdir(): set *eofp to 1 on eof.
If there were no dirents to copy out, return EINVAL same as UFS.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Konstantin Belousov <kib@FreeBSD.org>
Closes#17655
When requested to dump metaslabs only for specific vdev, apply the
filter also to log spacemaps to reduce the output. Unfortunately
filtering by metaslab numbers is more difficult so leave those.
While there, tune the output formatting.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17643
Only used for a couple of debug assertions which had very little value.
Setting it required taking certain locks, so we can remove all that too.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
Old debug param, not used for anything.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
dn_dirty_txg only existed for DNODE_IS_DIRTY(). In turn, that only
existed to ensure that a dnode was clean before making it eligible for
removal from the array of cached dnodes attached to the object 0 L0
dbuf.
dn_dirtycnt is enough to check that now, so use it directly and remove
the rest.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
Bumped when we take the dirty hold in dnode_setdirty(), dropped when the
dnode is finally cleaned up after sync in dnode_rele_task() or
userquota_updates_task().
This gives us a way to check if the dnode is dirty on any txg without
having to rely on outside information (eg presence on a dirty list),
which has been a rich source of bugs in the past.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Suggested-by: Robert Evans <evansr@google.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16297Closes#17652Closes#17658
This commit adds Debian 13 alias Trixie to the checked operating
systems. The image needs to be run with UEFI support.
Current Debian version overview:
- Debian 11 (Bullseye) -> "oldoldstable"
- Debian 12 (Bookworm) -> "oldstable"
- Debian 13 (Trixie) -> new "stable"
The CI will be run on Debian 12 and Debian 13 now.
Debian 11 is kept, but won't be used automatically.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17648
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17633Closes#17646
6cf17f65 (#17456) introduced a change to `configure.ac` which
breaks the patching done in the Debian packages DKMS source
installation phase. This results in a failed module build.
Adapt the awk script doing the patching to handle the added
`AC_CONFIG_FILE` entry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17633Closes#17646
All of zpool_find_config() callers now set lpc_printerr. Actually
printing the errors when pool can not be found should make zdb a
half percent less confusing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17642
