zfs_dbgmsg() does not need newline at the end of the message.
While there, slightly update/sync FreeBSD __dprintf().
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16536
Adding O_DIRECT support to ZFS to bypass the ARC for writes/reads.
O_DIRECT support in ZFS will always ensure there is coherency between
buffered and O_DIRECT IO requests. This ensures that all IO requests,
whether buffered or direct, will see the same file contents at all
times. Just as in other FS's , O_DIRECT does not imply O_SYNC. While
data is written directly to VDEV disks, metadata will not be synced
until the associated TXG is synced.
For both O_DIRECT read and write request the offset and request sizes,
at a minimum, must be PAGE_SIZE aligned. In the event they are not,
then EINVAL is returned unless the direct property is set to always (see
below).
For O_DIRECT writes:
The request also must be block aligned (recordsize) or the write
request will take the normal (buffered) write path. In the event that
request is block aligned and a cached copy of the buffer in the ARC,
then it will be discarded from the ARC forcing all further reads to
retrieve the data from disk.
For O_DIRECT reads:
The only alignment restrictions are PAGE_SIZE alignment. In the event
that the requested data is in buffered (in the ARC) it will just be
copied from the ARC into the user buffer.
For both O_DIRECT writes and reads the O_DIRECT flag will be ignored in
the event that file contents are mmap'ed. In this case, all requests
that are at least PAGE_SIZE aligned will just fall back to the buffered
paths. If the request however is not PAGE_SIZE aligned, EINVAL will
be returned as always regardless if the file's contents are mmap'ed.
Since O_DIRECT writes go through the normal ZIO pipeline, the
following operations are supported just as with normal buffered writes:
Checksum
Compression
Encryption
Erasure Coding
There is one caveat for the data integrity of O_DIRECT writes that is
distinct for each of the OS's supported by ZFS.
FreeBSD - FreeBSD is able to place user pages under write protection so
any data in the user buffers and written directly down to the
VDEV disks is guaranteed to not change. There is no concern
with data integrity and O_DIRECT writes.
Linux - Linux is not able to place anonymous user pages under write
protection. Because of this, if the user decides to manipulate
the page contents while the write operation is occurring, data
integrity can not be guaranteed. However, there is a module
parameter `zfs_vdev_direct_write_verify` that controls the
if a O_DIRECT writes that can occur to a top-level VDEV before
a checksum verify is run before the contents of the I/O buffer
are committed to disk. In the event of a checksum verification
failure the write will return EIO. The number of O_DIRECT write
checksum verification errors can be observed by doing
`zpool status -d`, which will list all verification errors that
have occurred on a top-level VDEV. Along with `zpool status`, a
ZED event will be issues as `dio_verify` when a checksum
verification error occurs.
ZVOLs and dedup is not currently supported with Direct I/O.
A new dataset property `direct` has been added with the following 3
allowable values:
disabled - Accepts O_DIRECT flag, but silently ignores it and treats
the request as a buffered IO request.
standard - Follows the alignment restrictions outlined above for
write/read IO requests when the O_DIRECT flag is used.
always - Treats every write/read IO request as though it passed
O_DIRECT and will do O_DIRECT if the alignment restrictions
are met otherwise will redirect through the ARC. This
property will not allow a request to fail.
There is also a module parameter zfs_dio_enabled that can be used to
force all reads and writes through the ARC. By setting this module
parameter to 0, it mimics as if the direct dataset property is set to
disabled.
Reviewed-by: Brian Behlendorf <behlendorf@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Co-authored-by: Matt Macy <mmacy@FreeBSD.org>
Co-authored-by: Brian Behlendorf <behlendorf@llnl.gov>
Closes#10018
module/zfs/ddt.c:2612:6: error: variable 'total' set but not used
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
zfs_acl_node_alloc allocates an uninitialized data buffer, but upstack
zfs_acl_chmod only partially initializes it. KMSAN reported that this
memory remained uninitialized at the point when it was read by
lzjb_compress, which suggests a possible kernel memory disclosure bug.
The full KMSAN warning may be found in the PR.
https://github.com/openzfs/zfs/pull/16511
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: Axcient
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When reviewing logs after a failure, its useful to see where
unsuspend/resume was requested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
All callers to spa_prop_get() and spa_prop_get_nvlist() supplied their
own preallocated nvlist (except ztest), so we can remove the option to
have them allocate one if none is supplied.
This sidesteps a bug in spa_prop_get(), where the error var wasn't
initialised, which could lead to the provided nvlist being freed at the
end.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16505
This adds zfs_valstr, a collection of pretty printers for bitfields and
enums. These are useful in debugging, logging and other display contexts
where raw values are difficult for the untrained (or even trained!) eye
to decipher.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Requires the new 'flat' physical data which has the start
time for a class entry.
The amount to prune can be based on a target percentage of
the unique entries or based on the age (i.e., every entry
older than N days).
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16277
The simplest thing first: add the FDT and log objects to the list of
objects to be considered when checking for leaks.
The rest is based on a conceptual change in all of this patch stack: a
block on disk with a 'D' bit is not necessarily in the DDT at all
(pruned), or in the DDT ZAPs (still on the log).
As such, walking the DDT up front is difficult (for all the reasons that
walking an unflushed log is difficult) and not really useful, since it's
not a reflection of what's on disk anyway.
Instead, we rework things here to be more like the BRT checks. When we
see a dedup'd block, we look it up in the DDT, consume a refcount, and
for the second-or-later instances, count them as duplicates.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#16277
In 4938d01db (#14086) zio_flag_t was converted from an enum (generally
signed 32-bit) to a uint64_t. The corresponding change wasn't made to
the error reporting subsystem, limiting the error flags being delivered
to zed to 32 bits. This bumps the whole pipeline to use uint64s.
A tiny bit of compatibility is added for newer zed working agsinst an
older kernel module, because its easy to do and misdetecting
scrub/resilver errors and taking action is potentially dangerous. Making
it work for new kernel modules against older zed seems to be far more
invasive for far less benefit, so I have not.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16469
When process got SIGSTOP/SIGTSTP, issig() dequeue them and return 0.
But process could still have another signal pending after dequeue. So,
after dequeue, check and return 1, if signal_pending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#16464
This commit extends the zpool-reguid(8) command with a -g flag, which
allows the user to specify the GUID to set.
This change also adds some general tests for zpool-reguid(8).
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Dispatched delayed tasks were not added to tasks_total, and cancelled
tasks were not removed. This notably could make tasks_total go to
UNIT64_MAX, but just generally meant the count could be wrong. So lets
not!
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16473
Commit 329e2ffa4bca456e65c3db7f5c5c04931c551b61 has made mount.zfs(8) to
call libzfs function 'zfs_mount_at', in order to propagate dataset
properties into mount options. This fix however, is limited to a special
use case where mount.zfs(8) is used in initrd with option '-o zfsutil'.
If either initrd or the user need to use mount.zfs(8) to mount a file
system with 'mountpoint' set to 'legacy', '-o zfsutil' can't be used and
the original issue #7947 will still happen.
Since the existing code already excluded the possibility of calling
'zfs_mount_at' when it was invoked as a helper program from zfs(8), by
checking 'ZFS_MOUNT_HELPER' environment variable, it makes no sense to
avoid calling 'zfs_mount_at' without '-o zfsutil'.
An exception however, is when mount.zfs(8) was invoked with '-o remount'
to update the mount options for an existing mount point. In this case
call mount(2) directly without modifying the mount options passed from
command line.
Furthermore, don't run mount.zfs(8) helper for automounting snapshot.
The above change to make mount.zfs(8) to call 'zfs_mount_at'
apparently caused it to trigger an automount for the snapshot
directory. When the helper was invoked as a result of a snapshot
automount, an infinite recursion will occur.
Since the need of invoking user mode mount(8) for automounting was to
overcome that the 'vfs_kern_mount' being GPL-only, just run mount(8)
without the mount.zfs(8) helper by adding option '-i'.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: WHR <whr@rivoreo.one>
Closes#16393
Some callers (eg `do_corrective_recv()`) pass in a dest buffer much
smaller than the wanted 87.5% of the source buffer, because the
incoming abd is larger than the source data and they "know" what the
decompressed size with be.
However, `abd_borrow_buf()` rightly asserts if we try to borrow more
than is available, so these callers fail.
Previously when all we had was a dest buffer, we didn't know how big it
was, so we couldn't do anything. Now we have a dest abd, with a size, so
we can clamp dest size to the abd size.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This commit changes the frontend zio_compress_data and
zio_decompress_data APIs to take ABD points instead of buffer pointers.
All callers are updated to match. Any that already have an appropriate
ABD nearby now use it directly, while at the rest we create an one.
Internally, the ABDs are passed through to the provider directly.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This commit changes the provider compress and decompress API to take ABD
pointers instead of buffer pointers for both data source and
destination. It then updates all providers to match.
This doesn't actually change the providers to do chunked compression,
just changes the API to allow such an update in the future. Helper
macros are added to easily adapt the ABD functions to their buffer-based
implementations.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This is mostly to make searching easier.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This will make future refactoring easier.
There are two we can't change for the moment, because zio_compress_data
does hole detection & collapsing which zio_decompress_data does not
actually know how to handle.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This allows a simple "wrapping" ABD for an existing linear buffer to be
allocated on the stack, avoiding an allocation.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Removing the platform #ifdefs from shared headers in favour of
per-platform headers. Makes abd_t much leaner, among other things.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
The Linux abd_os.c serves double-duty as the userspace scatter abd
implementation, by carrying an emulation of kernel scatterlists. This
commit lifts common and userspace-specific parts out into a separate
abd_os.c for libzpool.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
Makes it harder to use memory debuggers like valgrind directly, because
they can't see canary overruns.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
Nothing ever checks it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
zfs_arc_shrinker_limit (default: 10000) avoids ARC collapse
due to excessive memory reclaim. However, when the kernel is
in direct reclaim mode (ie: low on memory), limiting ARC reclaim
increases OOM risk. This is especially true on system without
(or with inadequate) swap.
This patch ignores zfs_arc_shrinker_limit when the kernel is in
direct reclaim mode, avoiding most OOM. It also restores
"echo 3 > /proc/sys/vm/drop_caches" ability to correctly drop
(almost) all ARC.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#16313
Rob Noris suggested that we could clean up redundant limits for the case
of non-blk mq scenario.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16462
In kernels 6.8 and later, the zvol block device is allocated with
qlimits passed during initialization. However, the zvol driver does not
set `max_hw_discard_sectors`, which is necessary to properly
initialize `max_discard_sectors`. This causes the `zvol_misc_trim` test
to fail on 6.8+ kernels when invoking the `blkdiscard` command. Setting
`max_hw_discard_sectors` in the `HAVE_BLK_ALLOC_DISK_2ARG` case resolve
the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16462
These had minimal useful information for the admin, didn't work properly
in some places, and knew far too much about taskq internals.
With the new stats available, these should never be needed anymore.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
This adds /proc/spl/kstats/taskq/summary, which attempts to show a
useful subset of stats for all taskqs in the system.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
This exposes a variety of per-taskq stats under /proc/spl/kstat/taskq,
one file per taskq, named for the taskq name.instance.
These include a small amount of info about the taskq config, the current
state of the threads and queues, and various counters for thread and
queue activity since the taskq was created.
To assist with decrementing queue size counters, the list an entry is on
is encoded in spare bits in the entry flags.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
For spl-taskq to use the kstats infrastructure, it has to be available
first.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
Skip ro check for snapshots since they are always ro regardless if ro
flag is passed by mount or not. This allows multi-mounting snapshots
without requiring to specify ro flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#16299
`l2arc_mfuonly` was added to avoid wasting L2 ARC on read-once MRU
data and metadata. However it can be useful to cache as much
metadata as possible while, at the same time, restricting data
cache to MFU buffers only.
This patch allow for such behavior by setting `l2arc_mfuonly` to 2
(or higher). The list of possible values is the following:
0: cache both MRU and MFU for both data and metadata;
1: cache only MFU for both data and metadata;
2: cache both MRU and MFU for metadata, but only MFU for data.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#16343Closes#16402
Adds per-DDT stats counting lookups and where they were serviced from
(either log or backing zap), number of log entries in memory, and flow
rates.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
The dedup log does not have a stable cursor, so its not possible to
persist our current scan location within it across pool reloads.
Beccause of this, when walking (scanning), we can't treat it like just
another source of dedup entries.
Instead, when a scan is wanted, we switch to an aggressive flushing
mode, pushing out entries older than the scan start txg as fast as we
can, before starting the scan proper.
Entries after the scan start txg will be handled via other methods; the
DDT ZAPs and logs will be written as normal, and blocks not seen yet
will be offered to the scan machinery as normal.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Adds a log/journal to dedup. At the end of txg, instead of writing the
entry directly to the ZAP, instead its adding to an in-memory tree and
appended to an on-disk object. The on-disk object is only read at
import, to reload the in-memory tree.
Lookups first go the the log tree before going to the ZAP, so
recently-used entries will remain close by in memory. This vastly
reduces overhead from dedup IO, as it will not have to do so many
read/update/write cycles on ZAP leaf nodes.
A flushing facility is added at end of txg, to push logged entries out
to the ZAP. There's actually two separate "logs" (in-memory tree and
on-disk object), one active (recieving updated entries) and one flushing
(writing out to disk). These are swapped (ie flushing begins) based on
memory used by the in-memory log trees and time since we last flushed
something.
The flushing facility monitors the amount of entries coming in and being
flushed out, and calibrates itself to try to flush enough each txg to
keep up with the ingest rate without competing too much with other IO.
Multiple tuneables are provided to control the flushing facility.
All the histograms and stats are update to accomodate the log as a
separate entry store. zdb gains knowledge of how to count them and dump
them. Documentation included!
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
All objects stored in the MOS get copies=3. For a large dedup table,
this requires significant extra IO and disk space, when its not really
necessary - the dedup table itself isn't needed to read or write data,
only to keep data usage down. Losing the dedup table does not render the
pool unusable, it just messes up the accounting somewhat.
This adds a dmu_ddt_copies tuneable. When set to 0, the existing
behaviour is used. When set higher, dedup table blocks (ZAP and log)
will have this many copies rather than the usual 3, while indirect
blocks will have one more again.
This is a tuneable for now mostly for testing. Losing a dedup table can
cause blocks to be leaked, and we currently have no facilities to repair
that.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
This yields substantial performance improvements when we only write out
some small % of entries at a time, as it will cause entries that will go
into "nearby" ZAP leaf nodes to be grouped closer together in the AVL, and
so touch fewer blocks. Without this, the distribution is an even spread,
so we touch a lot more ZAP leaf nodes for any given number of entries.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Both the API and the code were kinda mangled and I was really struggling
to follow it. The worst offender was the old ddt_stat_add(); after
fixing it up the rest of the changes are mostly knock-on effects and
targets of opportunity.
Note that the old ddt_stat_add() was safe against overflows - it could
produce crazy numbers, but the compiler wouldn't do anything stupid. The
assertions in ddt_stat_sub() go a lot of the way to protecting against
this; getting in a position where overflows are a problem is definitely
a programming error.
Also expanding ddt_stat_add() and ddt_histogram_empty() produces less
efficient assembly. I'm not bothered about this right now though; these
should not be hot functions, and if they are we'll optimise them later.
If we have to go back to the old form, we'll comment it like crazy.
Finally, I've removed the assertion that the bucket will never be
negative, as it will soon be possible to have entries with zero
refcounts: an entry for a block that is no longer on the pool, but is on
the log waiting to be synced out. It might be better to have a separate
bucket for these, since they're still using real space on disk, but
ultimately these stats are driving UI, and for now I've chosen to keep
them matching how they've looked in the past, as well as match the
operators mental model - pool usage is managed elsewhere.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
