Add DWPD (Drive Writes Per Day) rate limiting to control L2ARC write
speeds and protect SSD endurance. Write rate is constrained by the
minimum of l2arc_write_max and DWPD-calculated budget. Devices
accumulate unused write budget over 24-hour periods with automatic reset
and carry-over. Writes occur in controlled bursts (max 50MB) with
adaptive intervals to achieve target rates. Applies after initial device
fill.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
Transform L2ARC from single global feed thread to per-device threads,
enabling parallel writes to multiple L2ARC devices. Each device runs
its own feed thread independently, improving multi-device throughput.
Previously, a single thread served all devices sequentially; now each
device writes concurrently. Threads are created during device addition
and torn down on removal.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
When arc_release() is called on a header with a single buffer and
L2_WRITING set, the L2HDR must be preserved for ABD cleanup (similar
to the arc_hdr_destroy() case). If we destroy the L2HDR here, later
arc_write() will allocate a new ABD and call arc_hdr_free_abd(),
which needs b_l2hdr.b_dev to properly defer ABD cleanup, causing
VERIFY(HDR_HAS_L2HDR(hdr)) to fail.
Allocate a new header for the buffer in the single_buf_l2writing
case (single buffer + L2_WRITING), leaving the original header with
L2HDR intact. The original header becomes an "orphan" (no buffers, no
b_pabd) but retains device association for ABD cleanup when
l2arc_write_done() completes.
The shared buffer case (HDR_SHARED_DATA) is excluded because L2ARC
makes its own transformed copy via l2arc_apply_transforms(), so the
original ABD is not used by the L2 write. The header can be safely
reused without allocating a new one.
For proper evictable space accounting, arc_buf_remove() must be
called before remove_reference() in the single_buf_l2writing path.
This ensures arc_evictable_space_increment() (during remove_reference)
and arc_evictable_space_decrement() (during destruction) see the
same state (b_buf=NULL), preventing accounting leaks that cause
module unload to hang with non-zero esize.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
With multiple L2ARC devices, headers can be destroyed asynchronously
(e.g., during zpool sync) while L2_WRITING is set. The original code
destroyed L2HDR before L1HDR, causing ABDs to lose their device
association (b_l2hdr.b_dev) when arc_hdr_free_abd() is called.
This caused ABDs to be added to the global free-on-write list without
device information. When any L2ARC device completed its write and
attempted to free these orphaned ABDs, it would panic on
ASSERT(!list_link_active(&abd->abd_gang_link)) because the ABD was
still part of another device's vdev_queue I/O aggregation gang.
Fix by extending l2ad_mtx lock scope to cover L1HDR destruction and
reordering to destroy L1HDR before L2HDR when L2_WRITING is set. This
ensures arc_hdr_free_abd() can access b_l2hdr.b_dev to properly tag
ABDs with their device for deferred cleanup.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
This commit introduces per-sublist persistent markers that eliminate
redundant tail scanning between L2ARC iterations, providing significant
CPU efficiency improvements. Markers are pre-allocated during device
initialization and properly cleaned up during device removal.
The implementation uses conditional behavior based on device capacity:
small devices (capacity < arc_c) retain original HEAD/TAIL scanning
based on ARC warmup state, while large devices (capacity >= arc_c)
use the persistent marker approach for optimal CPU efficiency.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
The introduction of ARC multilists made L2ARC writing quite random,
depending on whether it found something to write in a randomly selected
sublist. This created inconsistent write patterns and poor utilization
of available sublists leading to uneven cache population.
This commit replaces random selection with systematic scanning across
all sublists within each burst. Fair headroom distribution ensures
even-depth traversal across all sublists until the target write size
is reached. Round-robin processing with random starting points eliminates
sequential bias while maintaining predictable write behavior.
The systematic approach provides consistent L2ARC filling patterns
and better utilization of available ARC data across all sublists.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
This implemented support for having multiple datasets unlocked and
mounted when a session is opened.
Example: `homes=rpool/home,tank/users`
Extra unit tests have been added
A man page documents have been added `man 8 pam_zfs_key`. A few
references to the new man page have also been added in other documents.
Signed-off-by: Dennis Vestergaard Værum <github@varum.dk>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
The macro 'flush_dcache_page(...)' modifies the page flags, but in Linux
6.18 the type of the page flags changed from 'unsigned long' to the
struct type 'memdesc_flags_t' with a single member 'f' which is the page
flags field.
Signed-off-by: Erik Larsson <catacombae@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Linux upstream commit 56754f0f46f6: "objtool: Rename
--Werror to --werror" did just that, so we should check for
either "--Werror" or "--werror", else the build will fail
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: John Cabaj <john.cabaj@canonical.com>
Closes#18152
- For whatever reason, the runner will now startup with either two 75GB
disks or one 150GB disk. Previously the runner was always booting
with two 75GB, but about a quarter of the time it now starts up
with a single 150GB disk. This caused qemu-1-setup.sh to fail
since it expected the two 75GB disks. This commit updates
qemu-1-setup.sh to work with either disk config.
- Remove the watchdog from qemu-1-setup.sh. It didn't turn out to be
useful.
- Remove the timestamps that zfs-qemu.yml added to the qemu-1-setup.sh
output. The timestamps were redundant, since you can already
download timestamped logs from the Github web interface.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#18166
As of FreeBSD 16, xdrproc_t will take exactly two arguments in both
kernel and userspace in line with the Linux kernel.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Alan Somers <asomers@freebsd.org>
Signed-off-by: Brooks Davis <brooks@capabilitieslimited.co.uk>
Closes#18154
The final txgs are used only to clear out any remaining deferred
frees, and we cannot write new data to them. Make sure we do not
try to do so.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Closes#18139
* Lock db_mtx around arc_release() in dbuf_release_bp()
While this function is called only in sync context, the same buffer
can be touched by dbuf_hold_impl() in open context, creating races.
All other accesses to arc_release() are already protected by db_mtx,
so just take it here too.
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
* Lock db_mtx in sa_byteswap()
While SA code seems protected by sa_lock, there is a back door of
dmu_objset_userquota_get_ids(), that may hold and access the dbuf
without sa_lock, relying only on db_mtx. Taking db_mtx here should
protect both the arc_release() and the data for db_buf.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18146
Add the Zstd update policy to the subtree README.
Also update the documented location of zstd-in.c to match upstream
changes, and normalize naming from 'ZSTD' to 'Zstd'.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
When updating Zstandard to version 1.5.7 the SPDX license identifiers
were lost. This commit restores them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
The Zstd context mempool can reuse buffers that were previously poisoned
under AddressSanitizer, leading to false-positive use-after-poison reports
during zloop and other stress tests.
Explicitly unpoison memory when handing buffers out to Zstd and poison the
user-visible region again when buffers are returned to the pool. This makes
the allocator ASan-correct while preserving existing pooling behavior.
Also fix non-standard void * pointer arithmetic in zstd_free() and remove an
early return in zstd_dctx_alloc() so kmem_type/kmem_size are always set on
pool hits.
This only affects ASan bookkeeping in user space, does not change runtime
behavior in non-ASan configurations, and does not affect on-disk formats.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This commit builds on the previous zstd library update and adds the
necessary ZFS integration and build system changes required to make
zstd 1.5.7 compile and function correctly.
Changes:
- Add zstd_preSplit.c (new in 1.5.7) to all build systems.
- Enable x86_64 assembly in userspace (huf_decompress_amd64.S).
- Disable assembly in kernel for RETHUNK/IBT compatibility.
- Disable intrinsics in kernel for EL10 x86_64-v3 baseline.
- Disable tracing in kernel builds for AArch64 compatibility.
- Fix ZSTD_isError symbol renaming with __asm__ directive.
- Rename abs64 to ZSTD_abs64 (FreeBSD kernel conflict).
- Fix bitstream.h attributes (MEM_STATIC -> FORCE_INLINE_TEMPLATE).
- Remove xxhash.c from BSD build (now header-only).
- Update symbol names in zstd_compat_wrapper.h.
- Ignore checkstyle for zstd-in.c.
Kernel assembly disabled for security mitigation compatibility. User
space retains full performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This commit only replaces the bundled source and does not include any
ZFS integration changes. Because the build depends on integration
adjustments, it will fail until the accompanying integration commit is
applied.
Upstream release: https://github.com/facebook/zstd/releases/tag/v1.5.7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This option is removed upstream in favour of plain INVARIANTS.
VNASSERT is always defined so I see no reason to use it conditionally.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#18136
The make symbols were never getting forwarded to the correct make
subprocess. As far as I can tell, this has never worked. Either that,
or something has changed in the behavior of make.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#18131
`zpool create` is supposed to log the command to the new pool’s history,
as a special record that never gets evicted from the ring buffer. but
when you create a pool with `zpool create -t`, no such record is ever
logged (#18102). that bug may be the cause of issues like #16408.
`zpool create -t` (83e9986f6e) and `zpool
import -t` (26b42f3f9d) are both designed
to override the on-disk zpool property `name` with an in-core
“temporary” name, but they work somewhat differently under the hood.
importing with a temporary name sets `spa->spa_import_flags |=
ZFS_IMPORT_TEMP_NAME` in ZFS_IOC_POOL_IMPORT, which tells
spa_write_cachefile() and spa_config_generate() to use the
ZPOOL_CONFIG_POOL_NAME in `spa->spa_config` instead of `spa->spa_name`.
creating with a temporary name permanently(!) sets the internal zpool
property `tname` (ZPOOL_PROP_TNAME) in the `zc->zc_nvlist_src` of
ZFS_IOC_POOL_CREATE, which tells zfs_ioc_pool_create()
(4ceb8dd6fd) and spa_create() to use that
name instead of `zc->zc_name`, then sets `spa->spa_import_flags |=
ZFS_IMPORT_TEMP_NAME` like an import.
but zfsdev_ioctl_common() fails to check for `tname` when saving the
pool name to `zfs_allow_log_key`, so when we call ZFS_IOC_LOG_HISTORY,
we call spa_open() on the wrong pool name and get ENOENT, so the logging
silently fails.
this patch fixes#18102 by checking for `tname` in zfsdev_ioctl_common()
like we do in zfs_ioc_pool_create().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: delan azabani <dazabani@igalia.com>
Closes#18118Closes#18102
Similar to BRT, DDT ZAP can be destroyed by sync context when it
becomes empty. Respectively similar to BRT introduce RW-lock to
protect open context methods from the destruction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18115
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
This commit adds support for converting a file handle to its
parent dentry. This is called in exportfs_decode_fh_raw()
when subtree checking is enabled in NFS. Defining this and
handling the expanded filehandles allows the knfsd to succeed
in handling the file handle where it might otherwise fail
with ESTALE when trying to open by filehandle.
A side effect of this change is that name_to_handle_at(2)
and open_by_handle_at(2) now support AT_HANDLE_CONNECTABLE.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18099
This code is only compiled for the Linux kernel module, so that define
is always set.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
These are used to implement the kstat and procfs_list interfaces, and
aren't used from outside. There's no need to export them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
It's a lot of rarely-compiled code, so move it to the side to make other
code easier to read.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
Long ago, SPL atomics were implemented as a global spinlock over
conventional operations. In 5e9b5d832b (2009-10) they was converted to
proper atomics, with the spinlock retained as a fallback.
The switch to compile with the fallback was later removed in a91258913f
(2018-05), but the code it enabled wasn't. So lets do that.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
On FreeBSD, linking the zfs kernel module with binutils ld 2.44 shows
the following warning:
ld: warning: aesni-gcm-avx2-vaes.o: missing .note.GNU-stack section
implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a
future version of the linker
Some of the `.S` files under `module/icp/asm-x86_64/modes` check whether
to emit the `.note.GNU-stack` section using:
#if defined(__linux__) && defined(__ELF__)
We could add `&& defined(__FreeBSD__)` to the test, but since all other
`.S` files in the OpenZFS tree use:
#ifdef __ELF__
it would seem more logical to use that instead. Any recent ELF platform
should support these note sections by now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#18119
ZFS send streams include a feature flag DMU_BACKUP_FEATURE_LARGE_BLOCKS
to indicate the presence of large blocks in the dataset. On the sending
side, this flag is included if the `-L` flag is passed to `zfs send`
and the feature is active in the dataset. On the receive side, the
stream is refused if the feature is active in the destination dataset
but the stream does not include the feature flag.
The problem is the feature is only activated when a large block is
born. If a large block has been born in the destination, but never
the source, the send can't work. This can arise when sending streams
back and forth between two datasets.
This commit fixes the problem by always activating the large blocks
feature when receiving a stream with the large block feature flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Austin Wise <AustinWise@gmail.com>
Closes#18105
Fix zfs_open() to skip zil_async_to_sync() for the snapshot, as it won't
have any transactions. zfsvfs->z_log is NULL for the snapshot.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#18091
Add a read-only dataset property, snapshots_changed_nsecs, which
exposes the nanosecond resolution version of snapshots_changed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Wolfgang Hoschek <wolfgang.hoschek@mac.com>
Closes#17998Closes#18031
In #17180, we fixed an interesting bug that i believe i hit in one of my
pools, but as far as i can tell, there was no test for it.
this patch adds a regression test for #17180, minimised from my attempts
to reproduce the bug in a way that resembled the history of my pool.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: delan azabani <dazabani@igalia.com>
Closes#18109
For kernel builds on FreeBSD, we redefine `__printf__` to
`__freebsd_kprintf__`, to support FreeBSD kernel printf(9) extensions
with clang.
In OpenZFS various printf related functions are declared with
`__attribute__((format(printf, X, Y)))`, so these won't work with the
above redefinition. With clang 21 and higher, this leads to errors
similar to:
sys/contrib/openzfs/module/zfs/spa_misc.c:414:38: error: passing
'printf' format string where 'freebsd_kprintf' format string is
expected [-Werror,-Wformat]
414 | (void) vsnprintf(buf, sizeof (buf), fmt, adx);
| ^
Since attribute names can always be spelled with leading and trailing
double underscores, rename these instances.
Note that in the FreeBSD base system we usually use `__printflike` from
`<sys/cdefs.h>`, but that does not apply to OpenZFS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#18095
This commit adds handling for the STATX_CHANGE_COOKIE so that
we can properly surface the ZFS znode sequence to NFS clients via
knfsd.
If knfsd does not have STATX_CHANGE_COOKIE in statx result then
it will synthesize the NFS change_info4 structure and related
change4id values algorithmically based on the ctime value of the
file. Since internally ZFS is using ktime_get_coarse_real_ts64()
for the timestamp calculation here it introduces the possiblity
that the change will not increment the change4id of directories
/ files causing a failure in the client to invalidate its attr
cache (among other things). See RFC 8881 Section 10.8 for
discussion of how clients may implement name and directory
caching.
Notable in this commit is that we are not initializing the
inode->i_version to the znode->z_seq number. The reason for this
is that we're intentionally not setting `SB_I_VERSION`. This
indicates that the filesystem manages its own i_version and
so it is not populated in the generic_fillattr.
The following compares tight loop of setattr over NFSv4
protocol while traching nfsd4_change_attribute.
Before change:
inode, change_attribute
4723, 7590032215978780890
4723, 7590032215978780890
4723, 7590032215978780890
4723, 7590032215982780865
4723, 7590032215982780865
After change:
inode, change_attribute
7602, 7590032992517123951
7602, 7590032992517123952
7602, 7590032992517123953
7602, 7590032992517123954
7602, 7590032992517123955
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18097
vmalloc()'d memory is not movable/reclaimable, so __GFP_RECLAIMABLE is
not a valid flag, and since 6.19 the kernel warns if you use it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18107
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18080
Add an Alpine Linux 3.23 runner to the CI chain to run OpenZFS builds
and tests against musl libc.
Currently, zfs_send_sparse is killed after 10 minutes on Alpine, causing
cascading EBUSY failures in the test suite. With zfs_send_sparse
disabled, the ZFS test suite reaches a pass rate of 94.62%.
This commit introduces the required Alpine-specific setup and a small
set of shell and cloud-init compatibility fixes that also apply to
existing Linux runners.
The Alpine runner is not enabled by default and is not executed for new
pull requests.
Sponsored-by: ERNW Research GmbH - https://ernw-research.de/
Signed-off-by: Alexander Moch <amoch@ernw.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Calling realpath(path, buf) can trigger fortified header wrappers that
allocate a PATH_MAX-sized temporary buffer on the stack, exceeding the
4 KiB frame limit on some systems. Use the heap-allocating
realpath(path, NULL) form instead.
Sponsored-by: ERNW Research GmbH - https://ernw-research.de/
Signed-off-by: Alexander Moch <amoch@ernw.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
It hasn't been necessary since Linux 3.13
(torvalds/linux@a57a49887e), and since 6.19 the kernel warns if you
use it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Since Linux 4.12 (torvalds/linux@19809c2da2) __GFP_HIGHMEM has been
automatically added to calls to __vmalloc() internally, so we don't need
it anymore. This is good, because since 6.19 the kernel warns if you use
__GFP_HIGHMEM.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Not sure why this was not caught by CI; perhaps my shellcheck is new
enough to catch more things.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Now that it's built into the main zfs module in all cases, there's no
reason to put it in its own dir.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18071
