This commit only replaces the bundled source and does not include any
ZFS integration changes. Because the build depends on integration
adjustments, it will fail until the accompanying integration commit is
applied.
Upstream release: https://github.com/facebook/zstd/releases/tag/v1.5.7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This option is removed upstream in favour of plain INVARIANTS.
VNASSERT is always defined so I see no reason to use it conditionally.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#18136
The make symbols were never getting forwarded to the correct make
subprocess. As far as I can tell, this has never worked. Either that,
or something has changed in the behavior of make.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#18131
`zpool create` is supposed to log the command to the new pool’s history,
as a special record that never gets evicted from the ring buffer. but
when you create a pool with `zpool create -t`, no such record is ever
logged (#18102). that bug may be the cause of issues like #16408.
`zpool create -t` (83e9986f6e) and `zpool
import -t` (26b42f3f9d) are both designed
to override the on-disk zpool property `name` with an in-core
“temporary” name, but they work somewhat differently under the hood.
importing with a temporary name sets `spa->spa_import_flags |=
ZFS_IMPORT_TEMP_NAME` in ZFS_IOC_POOL_IMPORT, which tells
spa_write_cachefile() and spa_config_generate() to use the
ZPOOL_CONFIG_POOL_NAME in `spa->spa_config` instead of `spa->spa_name`.
creating with a temporary name permanently(!) sets the internal zpool
property `tname` (ZPOOL_PROP_TNAME) in the `zc->zc_nvlist_src` of
ZFS_IOC_POOL_CREATE, which tells zfs_ioc_pool_create()
(4ceb8dd6fd) and spa_create() to use that
name instead of `zc->zc_name`, then sets `spa->spa_import_flags |=
ZFS_IMPORT_TEMP_NAME` like an import.
but zfsdev_ioctl_common() fails to check for `tname` when saving the
pool name to `zfs_allow_log_key`, so when we call ZFS_IOC_LOG_HISTORY,
we call spa_open() on the wrong pool name and get ENOENT, so the logging
silently fails.
this patch fixes#18102 by checking for `tname` in zfsdev_ioctl_common()
like we do in zfs_ioc_pool_create().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: delan azabani <dazabani@igalia.com>
Closes#18118Closes#18102
Similar to BRT, DDT ZAP can be destroyed by sync context when it
becomes empty. Respectively similar to BRT introduce RW-lock to
protect open context methods from the destruction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18115
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
This commit adds support for converting a file handle to its
parent dentry. This is called in exportfs_decode_fh_raw()
when subtree checking is enabled in NFS. Defining this and
handling the expanded filehandles allows the knfsd to succeed
in handling the file handle where it might otherwise fail
with ESTALE when trying to open by filehandle.
A side effect of this change is that name_to_handle_at(2)
and open_by_handle_at(2) now support AT_HANDLE_CONNECTABLE.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18099
This code is only compiled for the Linux kernel module, so that define
is always set.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
These are used to implement the kstat and procfs_list interfaces, and
aren't used from outside. There's no need to export them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
It's a lot of rarely-compiled code, so move it to the side to make other
code easier to read.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
Long ago, SPL atomics were implemented as a global spinlock over
conventional operations. In 5e9b5d832b (2009-10) they was converted to
proper atomics, with the spinlock retained as a fallback.
The switch to compile with the fallback was later removed in a91258913f
(2018-05), but the code it enabled wasn't. So lets do that.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
On FreeBSD, linking the zfs kernel module with binutils ld 2.44 shows
the following warning:
ld: warning: aesni-gcm-avx2-vaes.o: missing .note.GNU-stack section
implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a
future version of the linker
Some of the `.S` files under `module/icp/asm-x86_64/modes` check whether
to emit the `.note.GNU-stack` section using:
#if defined(__linux__) && defined(__ELF__)
We could add `&& defined(__FreeBSD__)` to the test, but since all other
`.S` files in the OpenZFS tree use:
#ifdef __ELF__
it would seem more logical to use that instead. Any recent ELF platform
should support these note sections by now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#18119
ZFS send streams include a feature flag DMU_BACKUP_FEATURE_LARGE_BLOCKS
to indicate the presence of large blocks in the dataset. On the sending
side, this flag is included if the `-L` flag is passed to `zfs send`
and the feature is active in the dataset. On the receive side, the
stream is refused if the feature is active in the destination dataset
but the stream does not include the feature flag.
The problem is the feature is only activated when a large block is
born. If a large block has been born in the destination, but never
the source, the send can't work. This can arise when sending streams
back and forth between two datasets.
This commit fixes the problem by always activating the large blocks
feature when receiving a stream with the large block feature flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Austin Wise <AustinWise@gmail.com>
Closes#18105
Fix zfs_open() to skip zil_async_to_sync() for the snapshot, as it won't
have any transactions. zfsvfs->z_log is NULL for the snapshot.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#18091
Add a read-only dataset property, snapshots_changed_nsecs, which
exposes the nanosecond resolution version of snapshots_changed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Wolfgang Hoschek <wolfgang.hoschek@mac.com>
Closes#17998Closes#18031
In #17180, we fixed an interesting bug that i believe i hit in one of my
pools, but as far as i can tell, there was no test for it.
this patch adds a regression test for #17180, minimised from my attempts
to reproduce the bug in a way that resembled the history of my pool.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: delan azabani <dazabani@igalia.com>
Closes#18109
For kernel builds on FreeBSD, we redefine `__printf__` to
`__freebsd_kprintf__`, to support FreeBSD kernel printf(9) extensions
with clang.
In OpenZFS various printf related functions are declared with
`__attribute__((format(printf, X, Y)))`, so these won't work with the
above redefinition. With clang 21 and higher, this leads to errors
similar to:
sys/contrib/openzfs/module/zfs/spa_misc.c:414:38: error: passing
'printf' format string where 'freebsd_kprintf' format string is
expected [-Werror,-Wformat]
414 | (void) vsnprintf(buf, sizeof (buf), fmt, adx);
| ^
Since attribute names can always be spelled with leading and trailing
double underscores, rename these instances.
Note that in the FreeBSD base system we usually use `__printflike` from
`<sys/cdefs.h>`, but that does not apply to OpenZFS.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#18095
This commit adds handling for the STATX_CHANGE_COOKIE so that
we can properly surface the ZFS znode sequence to NFS clients via
knfsd.
If knfsd does not have STATX_CHANGE_COOKIE in statx result then
it will synthesize the NFS change_info4 structure and related
change4id values algorithmically based on the ctime value of the
file. Since internally ZFS is using ktime_get_coarse_real_ts64()
for the timestamp calculation here it introduces the possiblity
that the change will not increment the change4id of directories
/ files causing a failure in the client to invalidate its attr
cache (among other things). See RFC 8881 Section 10.8 for
discussion of how clients may implement name and directory
caching.
Notable in this commit is that we are not initializing the
inode->i_version to the znode->z_seq number. The reason for this
is that we're intentionally not setting `SB_I_VERSION`. This
indicates that the filesystem manages its own i_version and
so it is not populated in the generic_fillattr.
The following compares tight loop of setattr over NFSv4
protocol while traching nfsd4_change_attribute.
Before change:
inode, change_attribute
4723, 7590032215978780890
4723, 7590032215978780890
4723, 7590032215978780890
4723, 7590032215982780865
4723, 7590032215982780865
After change:
inode, change_attribute
7602, 7590032992517123951
7602, 7590032992517123952
7602, 7590032992517123953
7602, 7590032992517123954
7602, 7590032992517123955
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18097
vmalloc()'d memory is not movable/reclaimable, so __GFP_RECLAIMABLE is
not a valid flag, and since 6.19 the kernel warns if you use it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18107
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18080
Add an Alpine Linux 3.23 runner to the CI chain to run OpenZFS builds
and tests against musl libc.
Currently, zfs_send_sparse is killed after 10 minutes on Alpine, causing
cascading EBUSY failures in the test suite. With zfs_send_sparse
disabled, the ZFS test suite reaches a pass rate of 94.62%.
This commit introduces the required Alpine-specific setup and a small
set of shell and cloud-init compatibility fixes that also apply to
existing Linux runners.
The Alpine runner is not enabled by default and is not executed for new
pull requests.
Sponsored-by: ERNW Research GmbH - https://ernw-research.de/
Signed-off-by: Alexander Moch <amoch@ernw.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Calling realpath(path, buf) can trigger fortified header wrappers that
allocate a PATH_MAX-sized temporary buffer on the stack, exceeding the
4 KiB frame limit on some systems. Use the heap-allocating
realpath(path, NULL) form instead.
Sponsored-by: ERNW Research GmbH - https://ernw-research.de/
Signed-off-by: Alexander Moch <amoch@ernw.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
It hasn't been necessary since Linux 3.13
(torvalds/linux@a57a49887e), and since 6.19 the kernel warns if you
use it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Since Linux 4.12 (torvalds/linux@19809c2da2) __GFP_HIGHMEM has been
automatically added to calls to __vmalloc() internally, so we don't need
it anymore. This is good, because since 6.19 the kernel warns if you use
__GFP_HIGHMEM.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18053
Not sure why this was not caught by CI; perhaps my shellcheck is new
enough to catch more things.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Now that it's built into the main zfs module in all cases, there's no
reason to put it in its own dir.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18071
It's a single source file that is not used anywhere else, so there's no
reason to keep it separate.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18071
The qemu-test-repo-vm.sh script tests installs ZFS from different
repos. Have it test from the new 2.4.x repos as well.
Also add a checkbox to run in "lookup mode". This just does a
quick lookup to see what version is installed in each repo. It does
not do a test install and module load. It only takes 3min to run vs
over an hour for the full version.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#18070
libzfs is the only user of libshare, and only internally, so there's no
particular reason to build it separately, nor to export its symbols. So,
pull it into libzfs proper, remove its "public" header, and hide its
symbols.
The bare minimum "public" API is just to count and enumerate the
supported share types. These are moved to libzfs.h with the other share
API.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18072
Scan time limits do not need precision beyond 1ms. Switching
scn_sync_start_time and spa_sync_starttime from gethrtime() to
getlrtime() saves ~3% of CPU time during resilver scan stage.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18061
With higher throughput and lower latency of modern devices ZFS can
happily live with pretty short (fractions of a second) TXGs. But
the two decade old multi-second minimal time limits can almost stop
payload writes by extending TXGs beyond dirty data limits of ARC
ability to amortize it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18060
"zdb -r -O pool/dataset obj-id destination" will copy
the file with object-id obj-id to the named destination;
without -O it'll still be interpreted as a pathname.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Sean Eric Fagan <sean.fagan@klarasystems.com>
Closes#16307
If the file already has more than one block, then the current
block size cannot change. But if the file block size is less
than the maximum block size supported by the file system, and
there are multiple blocks in the file, the current code will
almost always extend the rangelock to its maximum size.
This means that all writes become serialized and even reads
are slowed as they will more often contend with writes. This
commit adjusts the test so that we will not lock the entire
range if there is more than one block in the file already.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Maybee <mark.maybee@perforce.com>
Closes#18046Closes#18064
This improves synthetic 1 byte write speed by ~2.5%.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18063
There were some per I/O logging into dbgmsg in RAIDZ code, that
increased CPU load and wiped useful content out of dbgmsg, for
example during routine disk replacement process. I don't think
we need it to be that verbose.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18059
Newer versions of `shellcheck` and `checkbashism` finds more than
previous, so fix those.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
The `type` command is an optional feature in POSIX, so shouldn't be
used.
Instead, use `command -v`, which commit
e865e7809e
did, but it missed this file.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
There's no real documenation (which should probably be written!),
so instead document the code the best we can on what's going and
with the mounting of file systems to make future updates easier.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
More code standard changes, where if/then is on different lines.
To have it on the same, or on different lines, can be argued, but
we need to pick one, and try not to mix how to do things.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
The `ZFS_INITRD_ADDITIONAL_DATASETS` variable is used in the initrd
script to boot additional OS file systems besides the root file system.
But it wasn't included as an example in the config files.
The `ZFS_POOL_EXCEPTIONS` *was* included in the example defaults file,
but it was not exported, so not available in the initrd.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
The file `/etc/default/zfs` is already sourced by the `/etc/zfs/zfs-functions`,
so no need to source it again.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
When a pool is degraded, or needs special action, the `zpool import`
(without pool to import) line will report:
```
pool: rpool
id: 01234567890123456789
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
[..]
```
If the import with the pool name fails, it is supposed to try importing
using the pool ID.
However, the script is also getting the `action` line (and probably `scrub:`
if/when that's available):
pool; The pool can be imported using its name or numeric identifier.;config:;
which causes issues on consequent import attempts.
Cleanup the information by rewriting the `sed` command line.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
This just to make them easier to see.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#18000
