While technically its not a problem to clone between datasets with
different properties, it might create expectation of new properties
being applied during data move, while actually it won't happen.
For copies and checksum it may mean incorrect safety expectations.
For dedup, compression and special_small_blocks -- performance and
space usage. New zfs_bclone_strict_properties tunable controls it.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18180
Without this patch, the following crash can occur when
a file system is configured with "xattr=dir".
VNASSERT failed: locked not true at
/posix-acl/freebsd-rdma/sys/kern/vfs_subr.c:5786 (assert_vop_locked)
hold count flags ()
flags ()
lock type zfs: UNLOCKED
panic: zfs_dirent_lookup: vnode is not locked but should be
cpuid = 3
time = 1770520763
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b
vpanic() at vpanic+0x136/frame 0xfffffe00914c8270
panic() at panic+0x43/frame 0xfffffe00914c82d0
assert_vop_locked() at assert_vop_locked+0x78
zfs_dirent_lookup() at zfs_dirent_lookup+0x41
zfs_setattr_dir() at zfs_setattr_dir+0x123
zfs_setattr() at zfs_setattr+0x1389
zfs_freebsd_setattr() at zfs_freebsd_setattr+0x56b
VOP_SETATTR_APV() at VOP_SETATTR_APV+0x5d
setfown() at setfown+0xb1
kern_fchownat() at kern_fchownat+0x192
This patch fixes the problem by moving the vput() call for
attrzp to after the zfs_setattr_dir() call that takes it as
an argument.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes: #18188
Because the `strerror` result doesn't include a newline, we need to add
one. Observed on a minimal system that doesn't have `man` installed,
which behaves like this before the fix:
```
[root@upper tim]# zpool help import
couldn't run man program: No such file or directory[root@upper tim]#
```
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Hatch <tim@timhatch.com>
Closes#18183
Rewrite of cloned and snapshotted blocks can allocate additional
space, that may be undesired. In some cases it may have sense
to still rewrite snapshotted blocks, expecting the snapshots to
rotate with time, freeing space. In other cases rewrite of cloned
blocks may be acceptable, despite persistent space usage increase.
For this reason add them as separate flags to `zfs rewrite`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18179
"Welcome to my house! Enter freely. Go safely, and leave something of
the happiness you bring!"
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18189
- mmp_concurrent_import: added test case to verify that concurrent
import correctness. The pool may only be imported once.
- mmp_exported_import: an activity check is now required for pools
which were cleanly exported if the system and pool hostids don't
match.
- mmp_inactive_import: an activity check is now required for any
pool which wasn't cleanly exported, even if the system and pool
hostids match.
- mmp_on_uberblocks: updated expected uberblocks to take in to account
the value MMP_INTERVAL_DEFAULT is set too.
- mmp_reset_interval: reduce the number of iterations from 10 to 3.
This is sufficient to verify functionality and significantly speeds
up the test.
- mmp_on_uberblocks: adjust the thresholds and increase the runtime
to avoid false positives observed in CI.
- Update tests to use 'zhack action idle' instead of ztest to improve
the reliability of the tests.
- Add additional log_note messages to test cases which have multiple
verification steps to make it clear which portion of a test failed
when reviewing the logs.
- Replace default_setup/cleanup_noexit calls with 'zpool create' and
'zpool destroy' calls to avoid additional unnecessary dataset
creation work.
- Update activity/noactivity check helper functions to use the
ZFS_LOAD_INFO_DEBUG information now available from 'zpool import'
to determine if this activity check ran and why. This is more
reliable in the CI than measuring the runtime.
- Removed all mmp tests from the zts-report.py exceptions list.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
In order to reliably test the multihost protection we need two (or more)
systems attempting to import the pool at the same time. Historically, we've
used ztest running in userspace to simulate an active pool and attempted to
import the pool with the kernel modules. This works but ztest is a bit
unwieldy for this and if it crashes for unrelated reasons it can result
in false positives.
All we really need is the pool imported in userspace so the MMP thread is
active and writing out uberblocks. We can extend zhack which already knows
how to import the pool read/write and add an option to leave the pool open
and idle.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Add a -G option to zhack to dump the internal debug buffer on exit.
We were able to use the same code from zdb for this which was nice.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
As part of SPA_LOAD_IMPORT add an additional activity check to
detect simultaneous imports from different hosts. This check is
only required when the timing is such that there's no activity
for the the read-only tryimport check to detect. This extra
safety chceck operates as follows:
1. Repeats the following MMP check 10 times:
a. Write out an MMP uberblock with the best txg and a random
sequence id to all primary pool vdevs.
b. Verify a minimum number of good writes such that even if
the pool appears degraded on the remote host it will see
at least one of the updated MMP uberblocks.
c. Wait for the MMP interval this leaves a window for other
racing hosts to make similar modifications which can be
detected.
d. Call vdev_uberblock_load() to determine the best uberblock
to use, this should be the MMP uberblock just written.
e. Verify the txg and random sequeunce number match the MMP
uberblock written in 1a.
2. Restore the original MMP uberblocks. This allows the check
to be performed again if the pool fails to import for an
unrelated reason.
This change also includes some refactoring and minor improvements.
- Never try loading earlier txgs during import when the import
fails with EREMOTEIO or EINTER. These errors don't indicate
the txg is damaged but instead that its either in use on a
remote host or the import was interactively cancelled. No
rewind is also performed for EBADD which can result from a
stale trusted config when doing a verbatim import.
- Refactor the code for consistent logging of the multihost
activity check using spa_load_note() and console messages
indicating when the activity check was trigger and the result.
- Added MMP_*_MASK and MMP_SEQ_CLEAR() macros to allow easier
modification of the sequence number in an uberblock.
- Added ZFS_LOAD_INFO_DEBUG environment variable which can be
set to log to dump to stdout the spa_load_info nvlist returned
during import. This is used by the updated mmp test cases
to determine if an activity check was run and its result.
- Standardize the mmp messages similarly to make it easier to
find all the relevent mmp lines in the debug log.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Tryimport adds a unique prefix to the pool name to avoid name
collisions. This makes it awkward to log user-friendly info
during a tryimport. Add a spa_load_name() function which can
be used to report the unmodified pool name.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Move the "Starting import" log message in to the import block so
it's matched with the "Fiinshed importing" debug message.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
For a cleanly exported pools there exists a small window where
both systems may determine it's safe to import the pool and skip
the activity check. Only allow the check to be skipped when the
last imported hostid matches the systems hostid and the pool was
cleanly exported.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
This ensures that the in-memory state of the feature is recorded and
that `dsl_dataset_activate_feature` is not called when the feature
is already active.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Austin Wise <AustinWise@gmail.com>
Closes#18143Closes#18144
As per #9008, pyzfs implements and documents several functions that
would be very useful, but then try to call c functions in libzfs_core.
These functions do not exist in libzfs_core, and in the ~7 years of
ticket creation still do not exist in libzfs_core.
It seems unlikely that these functions will get implemented, though 2
years ago, ~5 years after that ticket lzc_get_props was implemented in
23a489a411 which enabled get properties in
pyzfs. Sadly the first thing the pyzfs function for lzc_get_props does
is call _list, which cals lzc_list, which is not implmented. And the
functions to set or inherit properties are still missing.
Having these functions in pyzfs are misleading, footguns, and time
wasters when evaluating pyzfs.
Removing these functions from pyzfs means that _if_ these functions are
added in libzfs_core, then pyzfs will also need to re-implement these
functions. It's a shame, because these py functions have good
documentation and tests. Funny enough the tests are auto skipped if it
detects that the functions don't exist in libzfs_core.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: George Shammas <george@shamm.as>
Closes#9008Closes#18162
To avoid read errors with transaction open dmu_tx_check_ioerr()
is used to read everything required in advance. But there seems
to be a chance for the buffer to evicted from dbuf cache in
between, which result in immediate eviction from ARC, which may
require additional disk read later in a place where error handling
is problematic.
To partially workaround this introduce a new flag DMU_IS_PREFETCH,
relayed to ARC as ARC_FLAG_PREFETCH | ARC_FLAG_PRESCIENT_PREFETCH,
making ARC delay eviction by at least several seconds, or till the
actual read inside the transaction, that will promote it to demand
access.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18160
These fields became unused when ABD was introduced in a6255b7fc.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
Add l2arc_dwpd_limit, remove l2arc_write_boost, update related tunables.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
Add DWPD (Drive Writes Per Day) rate limiting to control L2ARC write
speeds and protect SSD endurance. Write rate is constrained by the
minimum of l2arc_write_max and DWPD-calculated budget. Devices
accumulate unused write budget over 24-hour periods with automatic reset
and carry-over. Writes occur in controlled bursts (max 50MB) with
adaptive intervals to achieve target rates. Applies after initial device
fill.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
Transform L2ARC from single global feed thread to per-device threads,
enabling parallel writes to multiple L2ARC devices. Each device runs
its own feed thread independently, improving multi-device throughput.
Previously, a single thread served all devices sequentially; now each
device writes concurrently. Threads are created during device addition
and torn down on removal.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
When arc_release() is called on a header with a single buffer and
L2_WRITING set, the L2HDR must be preserved for ABD cleanup (similar
to the arc_hdr_destroy() case). If we destroy the L2HDR here, later
arc_write() will allocate a new ABD and call arc_hdr_free_abd(),
which needs b_l2hdr.b_dev to properly defer ABD cleanup, causing
VERIFY(HDR_HAS_L2HDR(hdr)) to fail.
Allocate a new header for the buffer in the single_buf_l2writing
case (single buffer + L2_WRITING), leaving the original header with
L2HDR intact. The original header becomes an "orphan" (no buffers, no
b_pabd) but retains device association for ABD cleanup when
l2arc_write_done() completes.
The shared buffer case (HDR_SHARED_DATA) is excluded because L2ARC
makes its own transformed copy via l2arc_apply_transforms(), so the
original ABD is not used by the L2 write. The header can be safely
reused without allocating a new one.
For proper evictable space accounting, arc_buf_remove() must be
called before remove_reference() in the single_buf_l2writing path.
This ensures arc_evictable_space_increment() (during remove_reference)
and arc_evictable_space_decrement() (during destruction) see the
same state (b_buf=NULL), preventing accounting leaks that cause
module unload to hang with non-zero esize.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
With multiple L2ARC devices, headers can be destroyed asynchronously
(e.g., during zpool sync) while L2_WRITING is set. The original code
destroyed L2HDR before L1HDR, causing ABDs to lose their device
association (b_l2hdr.b_dev) when arc_hdr_free_abd() is called.
This caused ABDs to be added to the global free-on-write list without
device information. When any L2ARC device completed its write and
attempted to free these orphaned ABDs, it would panic on
ASSERT(!list_link_active(&abd->abd_gang_link)) because the ABD was
still part of another device's vdev_queue I/O aggregation gang.
Fix by extending l2ad_mtx lock scope to cover L1HDR destruction and
reordering to destroy L1HDR before L2HDR when L2_WRITING is set. This
ensures arc_hdr_free_abd() can access b_l2hdr.b_dev to properly tag
ABDs with their device for deferred cleanup.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
This commit introduces per-sublist persistent markers that eliminate
redundant tail scanning between L2ARC iterations, providing significant
CPU efficiency improvements. Markers are pre-allocated during device
initialization and properly cleaned up during device removal.
The implementation uses conditional behavior based on device capacity:
small devices (capacity < arc_c) retain original HEAD/TAIL scanning
based on ARC warmup state, while large devices (capacity >= arc_c)
use the persistent marker approach for optimal CPU efficiency.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
The introduction of ARC multilists made L2ARC writing quite random,
depending on whether it found something to write in a randomly selected
sublist. This created inconsistent write patterns and poor utilization
of available sublists leading to uneven cache population.
This commit replaces random selection with systematic scanning across
all sublists within each burst. Fair headroom distribution ensures
even-depth traversal across all sublists until the target write size
is reached. Round-robin processing with random starting points eliminates
sequential bias while maintaining predictable write behavior.
The systematic approach provides consistent L2ARC filling patterns
and better utilization of available ARC data across all sublists.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#18093
This implemented support for having multiple datasets unlocked and
mounted when a session is opened.
Example: `homes=rpool/home,tank/users`
Extra unit tests have been added
A man page documents have been added `man 8 pam_zfs_key`. A few
references to the new man page have also been added in other documents.
Signed-off-by: Dennis Vestergaard Værum <github@varum.dk>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
The macro 'flush_dcache_page(...)' modifies the page flags, but in Linux
6.18 the type of the page flags changed from 'unsigned long' to the
struct type 'memdesc_flags_t' with a single member 'f' which is the page
flags field.
Signed-off-by: Erik Larsson <catacombae@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Linux upstream commit 56754f0f46f6: "objtool: Rename
--Werror to --werror" did just that, so we should check for
either "--Werror" or "--werror", else the build will fail
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: John Cabaj <john.cabaj@canonical.com>
Closes#18152
- For whatever reason, the runner will now startup with either two 75GB
disks or one 150GB disk. Previously the runner was always booting
with two 75GB, but about a quarter of the time it now starts up
with a single 150GB disk. This caused qemu-1-setup.sh to fail
since it expected the two 75GB disks. This commit updates
qemu-1-setup.sh to work with either disk config.
- Remove the watchdog from qemu-1-setup.sh. It didn't turn out to be
useful.
- Remove the timestamps that zfs-qemu.yml added to the qemu-1-setup.sh
output. The timestamps were redundant, since you can already
download timestamped logs from the Github web interface.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#18166
As of FreeBSD 16, xdrproc_t will take exactly two arguments in both
kernel and userspace in line with the Linux kernel.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Alan Somers <asomers@freebsd.org>
Signed-off-by: Brooks Davis <brooks@capabilitieslimited.co.uk>
Closes#18154
The final txgs are used only to clear out any remaining deferred
frees, and we cannot write new data to them. Make sure we do not
try to do so.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Closes#18139
* Lock db_mtx around arc_release() in dbuf_release_bp()
While this function is called only in sync context, the same buffer
can be touched by dbuf_hold_impl() in open context, creating races.
All other accesses to arc_release() are already protected by db_mtx,
so just take it here too.
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
* Lock db_mtx in sa_byteswap()
While SA code seems protected by sa_lock, there is a back door of
dmu_objset_userquota_get_ids(), that may hold and access the dbuf
without sa_lock, relying only on db_mtx. Taking db_mtx here should
protect both the arc_release() and the data for db_buf.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18146
Add the Zstd update policy to the subtree README.
Also update the documented location of zstd-in.c to match upstream
changes, and normalize naming from 'ZSTD' to 'Zstd'.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
When updating Zstandard to version 1.5.7 the SPDX license identifiers
were lost. This commit restores them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
The Zstd context mempool can reuse buffers that were previously poisoned
under AddressSanitizer, leading to false-positive use-after-poison reports
during zloop and other stress tests.
Explicitly unpoison memory when handing buffers out to Zstd and poison the
user-visible region again when buffers are returned to the pool. This makes
the allocator ASan-correct while preserving existing pooling behavior.
Also fix non-standard void * pointer arithmetic in zstd_free() and remove an
early return in zstd_dctx_alloc() so kmem_type/kmem_size are always set on
pool hits.
This only affects ASan bookkeeping in user space, does not change runtime
behavior in non-ASan configurations, and does not affect on-disk formats.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This commit builds on the previous zstd library update and adds the
necessary ZFS integration and build system changes required to make
zstd 1.5.7 compile and function correctly.
Changes:
- Add zstd_preSplit.c (new in 1.5.7) to all build systems.
- Enable x86_64 assembly in userspace (huf_decompress_amd64.S).
- Disable assembly in kernel for RETHUNK/IBT compatibility.
- Disable intrinsics in kernel for EL10 x86_64-v3 baseline.
- Disable tracing in kernel builds for AArch64 compatibility.
- Fix ZSTD_isError symbol renaming with __asm__ directive.
- Rename abs64 to ZSTD_abs64 (FreeBSD kernel conflict).
- Fix bitstream.h attributes (MEM_STATIC -> FORCE_INLINE_TEMPLATE).
- Remove xxhash.c from BSD build (now header-only).
- Update symbol names in zstd_compat_wrapper.h.
- Ignore checkstyle for zstd-in.c.
Kernel assembly disabled for security mitigation compatibility. User
space retains full performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This commit only replaces the bundled source and does not include any
ZFS integration changes. Because the build depends on integration
adjustments, it will fail until the accompanying integration commit is
applied.
Upstream release: https://github.com/facebook/zstd/releases/tag/v1.5.7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Moch <mail@alexmoch.com>
Closes#18089
This option is removed upstream in favour of plain INVARIANTS.
VNASSERT is always defined so I see no reason to use it conditionally.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#18136
The make symbols were never getting forwarded to the correct make
subprocess. As far as I can tell, this has never worked. Either that,
or something has changed in the behavior of make.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#18131
`zpool create` is supposed to log the command to the new pool’s history,
as a special record that never gets evicted from the ring buffer. but
when you create a pool with `zpool create -t`, no such record is ever
logged (#18102). that bug may be the cause of issues like #16408.
`zpool create -t` (83e9986f6e) and `zpool
import -t` (26b42f3f9d) are both designed
to override the on-disk zpool property `name` with an in-core
“temporary” name, but they work somewhat differently under the hood.
importing with a temporary name sets `spa->spa_import_flags |=
ZFS_IMPORT_TEMP_NAME` in ZFS_IOC_POOL_IMPORT, which tells
spa_write_cachefile() and spa_config_generate() to use the
ZPOOL_CONFIG_POOL_NAME in `spa->spa_config` instead of `spa->spa_name`.
creating with a temporary name permanently(!) sets the internal zpool
property `tname` (ZPOOL_PROP_TNAME) in the `zc->zc_nvlist_src` of
ZFS_IOC_POOL_CREATE, which tells zfs_ioc_pool_create()
(4ceb8dd6fd) and spa_create() to use that
name instead of `zc->zc_name`, then sets `spa->spa_import_flags |=
ZFS_IMPORT_TEMP_NAME` like an import.
but zfsdev_ioctl_common() fails to check for `tname` when saving the
pool name to `zfs_allow_log_key`, so when we call ZFS_IOC_LOG_HISTORY,
we call spa_open() on the wrong pool name and get ENOENT, so the logging
silently fails.
this patch fixes#18102 by checking for `tname` in zfsdev_ioctl_common()
like we do in zfs_ioc_pool_create().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: delan azabani <dazabani@igalia.com>
Closes#18118Closes#18102
Similar to BRT, DDT ZAP can be destroyed by sync context when it
becomes empty. Respectively similar to BRT introduce RW-lock to
protect open context methods from the destruction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#18115
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
This commit adds support for converting a file handle to its
parent dentry. This is called in exportfs_decode_fh_raw()
when subtree checking is enabled in NFS. Defining this and
handling the expanded filehandles allows the knfsd to succeed
in handling the file handle where it might otherwise fail
with ESTALE when trying to open by filehandle.
A side effect of this change is that name_to_handle_at(2)
and open_by_handle_at(2) now support AT_HANDLE_CONNECTABLE.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Andrew Walker <andrew.walker@truenas.com>
Closes#18099
This code is only compiled for the Linux kernel module, so that define
is always set.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
These are used to implement the kstat and procfs_list interfaces, and
aren't used from outside. There's no need to export them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
It's a lot of rarely-compiled code, so move it to the side to make other
code easier to read.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
Long ago, SPL atomics were implemented as a global spinlock over
conventional operations. In 5e9b5d832b (2009-10) they was converted to
proper atomics, with the spinlock retained as a fallback.
The switch to compile with the fallback was later removed in a91258913f
(2018-05), but the code it enabled wasn't. So lets do that.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18117
