pve-qemu-qoup/debian/patches/pve/0032-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch

414 lines
13 KiB
Diff
Raw Normal View History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Stefan Reiter <s.reiter@proxmox.com>
Date: Wed, 8 Jul 2020 09:50:54 +0200
Subject: [PATCH] PVE: Add PBS block driver to map backup archives into VMs
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[error cleanups, file_open implementation]
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
[WB: add namespace support]
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
[FE: adapt to changed function signatures
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
make pbs_co_preadv return values consistent with QEMU
getlength is now a coroutine function]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
block/meson.build | 2 +
block/pbs.c | 307 +++++++++++++++++++++++++++++++++++++++++++
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
meson.build | 2 +-
qapi/block-core.json | 13 ++
qapi/pragma.json | 1 +
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
5 files changed, 324 insertions(+), 1 deletion(-)
create mode 100644 block/pbs.c
diff --git a/block/meson.build b/block/meson.build
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
index 9df99aceb5..549c0c7103 100644
--- a/block/meson.build
+++ b/block/meson.build
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
@@ -49,6 +49,8 @@ block_ss.add(files(
'../pve-backup.c',
), libproxmox_backup_qemu)
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
+block_ss.add(files('pbs.c'), libproxmox_backup_qemu)
+
system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
system_ss.add(files('block-ram-registrar.c'))
diff --git a/block/pbs.c b/block/pbs.c
new file mode 100644
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
index 0000000000..dd72356bd3
--- /dev/null
+++ b/block/pbs.c
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
@@ -0,0 +1,307 @@
+/*
+ * Proxmox Backup Server read-only block driver
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qstring.h"
+#include "qemu/module.h"
+#include "qemu/option.h"
+#include "qemu/cutils.h"
+#include "block/block_int.h"
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
+#include "block/block-io.h"
+
+#include <proxmox-backup-qemu.h>
+
+#define PBS_OPT_REPOSITORY "repository"
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+#define PBS_OPT_NAMESPACE "namespace"
+#define PBS_OPT_SNAPSHOT "snapshot"
+#define PBS_OPT_ARCHIVE "archive"
+#define PBS_OPT_KEYFILE "keyfile"
+#define PBS_OPT_PASSWORD "password"
+#define PBS_OPT_FINGERPRINT "fingerprint"
+#define PBS_OPT_ENCRYPTION_PASSWORD "key_password"
+
+typedef struct {
+ ProxmoxRestoreHandle *conn;
+ char aid;
+ int64_t length;
+
+ char *repository;
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ char *namespace;
+ char *snapshot;
+ char *archive;
+} BDRVPBSState;
+
+static QemuOptsList runtime_opts = {
+ .name = "pbs",
+ .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
+ .desc = {
+ {
+ .name = PBS_OPT_REPOSITORY,
+ .type = QEMU_OPT_STRING,
+ .help = "The server address and repository to connect to.",
+ },
+ {
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ .name = PBS_OPT_NAMESPACE,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: The snapshot's namespace.",
+ },
+ {
+ .name = PBS_OPT_SNAPSHOT,
+ .type = QEMU_OPT_STRING,
+ .help = "The snapshot to read.",
+ },
+ {
+ .name = PBS_OPT_ARCHIVE,
+ .type = QEMU_OPT_STRING,
+ .help = "Which archive within the snapshot should be accessed.",
+ },
+ {
+ .name = PBS_OPT_PASSWORD,
+ .type = QEMU_OPT_STRING,
+ .help = "Server password. Can be passed as env var 'PBS_PASSWORD'.",
+ },
+ {
+ .name = PBS_OPT_FINGERPRINT,
+ .type = QEMU_OPT_STRING,
+ .help = "Server fingerprint. Can be passed as env var 'PBS_FINGERPRINT'.",
+ },
+ {
+ .name = PBS_OPT_ENCRYPTION_PASSWORD,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: Key password. Can be passed as env var 'PBS_ENCRYPTION_PASSWORD'.",
+ },
+ {
+ .name = PBS_OPT_KEYFILE,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: The path to the keyfile to use.",
+ },
+ { /* end of list */ }
+ },
+};
+
+
+// filename format:
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+// pbs:repository=<repo>,namespace=<ns>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
+static void pbs_parse_filename(const char *filename, QDict *options,
+ Error **errp)
+{
+
+ if (!strstart(filename, "pbs:", &filename)) {
+ if (errp) error_setg(errp, "pbs_parse_filename failed - missing 'pbs:' prefix");
+ }
+
+
+ QemuOpts *opts = qemu_opts_parse_noisily(&runtime_opts, filename, false);
+ if (!opts) {
+ if (errp) error_setg(errp, "pbs_parse_filename failed");
+ return;
+ }
+
+ qemu_opts_to_qdict(opts, options);
+
+ qemu_opts_del(opts);
+}
+
+static int pbs_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
+{
+ QemuOpts *opts;
+ BDRVPBSState *s = bs->opaque;
+ char *pbs_error = NULL;
+
+ opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
+ qemu_opts_absorb_qdict(opts, options, &error_abort);
+
+ s->repository = g_strdup(qemu_opt_get(opts, PBS_OPT_REPOSITORY));
+ s->snapshot = g_strdup(qemu_opt_get(opts, PBS_OPT_SNAPSHOT));
+ s->archive = g_strdup(qemu_opt_get(opts, PBS_OPT_ARCHIVE));
+ const char *keyfile = qemu_opt_get(opts, PBS_OPT_KEYFILE);
+ const char *password = qemu_opt_get(opts, PBS_OPT_PASSWORD);
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ const char *namespace = qemu_opt_get(opts, PBS_OPT_NAMESPACE);
+ const char *fingerprint = qemu_opt_get(opts, PBS_OPT_FINGERPRINT);
+ const char *key_password = qemu_opt_get(opts, PBS_OPT_ENCRYPTION_PASSWORD);
+
+ if (!password) {
+ password = getenv("PBS_PASSWORD");
+ }
+ if (!fingerprint) {
+ fingerprint = getenv("PBS_FINGERPRINT");
+ }
+ if (!key_password) {
+ key_password = getenv("PBS_ENCRYPTION_PASSWORD");
+ }
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ if (namespace) {
+ s->namespace = g_strdup(namespace);
+ }
+
+ /* connect to PBS server in read mode */
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ s->conn = proxmox_restore_new_ns(s->repository, s->snapshot, s->namespace, password,
+ keyfile, key_password, fingerprint, &pbs_error);
+
+ /* invalidates qemu_opt_get char pointers from above */
+ qemu_opts_del(opts);
+
+ if (!s->conn) {
+ if (pbs_error && errp) error_setg(errp, "PBS restore_new failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ENOMEM;
+ }
+
+ int ret = proxmox_restore_connect(s->conn, &pbs_error);
+ if (ret < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS connect failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ECONNREFUSED;
+ }
+
+ /* acquire handle and length */
+ s->aid = proxmox_restore_open_image(s->conn, s->archive, &pbs_error);
+ if (s->aid < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS open_image failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ENODEV;
+ }
+ s->length = proxmox_restore_get_image_length(s->conn, s->aid, &pbs_error);
+ if (s->length < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS get_image_length failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pbs_file_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
+{
+ return pbs_open(bs, options, flags, errp);
+}
+
+static void pbs_close(BlockDriverState *bs) {
+ BDRVPBSState *s = bs->opaque;
+ g_free(s->repository);
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ g_free(s->namespace);
+ g_free(s->snapshot);
+ g_free(s->archive);
+ proxmox_restore_disconnect(s->conn);
+}
+
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
+static coroutine_fn int64_t GRAPH_RDLOCK
+pbs_co_getlength(BlockDriverState *bs)
+{
+ BDRVPBSState *s = bs->opaque;
+ return s->length;
+}
+
+typedef struct ReadCallbackData {
+ Coroutine *co;
+ AioContext *ctx;
+} ReadCallbackData;
+
+static void read_callback(void *callback_data)
+{
+ ReadCallbackData *rcb = callback_data;
+ aio_co_schedule(rcb->ctx, rcb->co);
+}
+
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
+static coroutine_fn int GRAPH_RDLOCK
+pbs_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
+ QEMUIOVector *qiov, BdrvRequestFlags flags)
+{
+ BDRVPBSState *s = bs->opaque;
+ int ret;
+ char *pbs_error = NULL;
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ uint8_t *buf;
+ bool inline_buf = true;
+
+ /* for single-buffer IO vectors we can fast-path the write directly to it */
+ if (qiov->niov == 1 && qiov->iov->iov_len >= bytes) {
+ buf = qiov->iov->iov_base;
+ } else {
+ inline_buf = false;
+ buf = g_malloc(bytes);
+ }
+
+ if (offset < 0 || bytes < 0) {
+ fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
+ return -EIO;
+ }
+
+ ReadCallbackData rcb = {
+ .co = qemu_coroutine_self(),
+ .ctx = bdrv_get_aio_context(bs),
+ };
+
+ proxmox_restore_read_image_at_async(s->conn, s->aid, buf, (uint64_t)offset, (uint64_t)bytes,
+ read_callback, (void *) &rcb, &ret, &pbs_error);
+
+ qemu_coroutine_yield();
+
+ if (ret < 0) {
+ fprintf(stderr, "error during PBS read: %s\n", pbs_error ? pbs_error : "unknown error");
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -EIO;
+ }
+
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ if (!inline_buf) {
+ qemu_iovec_from_buf(qiov, 0, buf, bytes);
+ g_free(buf);
+ }
+
+ return 0;
+}
+
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
+static coroutine_fn int GRAPH_RDLOCK
+pbs_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
+ QEMUIOVector *qiov, BdrvRequestFlags flags)
+{
+ fprintf(stderr, "pbs-bdrv: cannot write to backup file, make sure "
+ "any attached disk devices are set to read-only!\n");
+ return -EPERM;
+}
+
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
+static void GRAPH_RDLOCK
+pbs_refresh_filename(BlockDriverState *bs)
+{
+ BDRVPBSState *s = bs->opaque;
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ if (s->namespace) {
+ snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s:%s(%s)",
+ s->repository, s->namespace, s->snapshot, s->archive);
+ } else {
+ snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
+ s->repository, s->snapshot, s->archive);
+ }
+}
+
+static const char *const pbs_strong_runtime_opts[] = {
+ NULL
+};
+
+static BlockDriver bdrv_pbs_co = {
+ .format_name = "pbs",
+ .protocol_name = "pbs",
+ .instance_size = sizeof(BDRVPBSState),
+
+ .bdrv_parse_filename = pbs_parse_filename,
+
+ .bdrv_file_open = pbs_file_open,
+ .bdrv_open = pbs_open,
+ .bdrv_close = pbs_close,
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
+ .bdrv_co_getlength = pbs_co_getlength,
+
+ .bdrv_co_preadv = pbs_co_preadv,
+ .bdrv_co_pwritev = pbs_co_pwritev,
+
+ .bdrv_refresh_filename = pbs_refresh_filename,
+ .strong_runtime_opts = pbs_strong_runtime_opts,
+};
+
+static void bdrv_pbs_init(void)
+{
+ bdrv_register(&bdrv_pbs_co);
+}
+
+block_init(bdrv_pbs_init);
diff --git a/meson.build b/meson.build
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
index c70f2a4937..18c3a312eb 100644
--- a/meson.build
+++ b/meson.build
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
@@ -4390,7 +4390,7 @@ summary_info += {'bzip2 support': libbzip2}
summary_info += {'lzfse support': liblzfse}
summary_info += {'zstd support': zstd}
summary_info += {'NUMA host support': numa}
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
-summary_info += {'capstone': capstone}
+summary_info += {'PBS bdrv support': config_host.has_key('CONFIG_PBS_BDRV')}
summary_info += {'libpmem support': libpmem}
summary_info += {'libdaxctl support': libdaxctl}
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
summary_info += {'libudev': libudev}
diff --git a/qapi/block-core.json b/qapi/block-core.json
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
index c155d74230..a4050268ca 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
@@ -3451,6 +3451,7 @@
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
'parallels', 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum',
'raw', 'rbd',
{ 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
+ 'pbs',
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
'ssh', 'throttle', 'vdi', 'vhdx',
{ 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' },
{ 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' },
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
@@ -3537,6 +3538,17 @@
{ 'struct': 'BlockdevOptionsNull',
'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } }
+##
+# @BlockdevOptionsPbs:
+#
+# Driver specific block device options for the PBS backend.
+#
+##
+{ 'struct': 'BlockdevOptionsPbs',
+ 'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
+ '*keyfile': 'str', '*password': 'str', '*fingerprint': 'str',
squash related patches where there is no good reason to keep them separate. It's a pain during rebase if there are multiple patches changing the same code over and over again. This was especially bad for the backup-related patches. If the history of patches really is needed, it can be extracted via git. Additionally, compilation with partial application of patches was broken since a long time, because one of the master key changes became part of an earlier patch during a past rebase. If only the same files were changed by a subsequent patch and the changes felt to belong together (obvious for later bug fixes, but also done for features e.g. adding master key support for PBS), the patches were squashed together. The PBS namespace support patch was split into the individual parts it changes, i.e. PBS block driver, pbs-restore binary and QMP backup infrastructure, and squashed into the respective patches. No code change is intended, git diff in the submodule should not show any difference between applying all patches before this commit and applying all patches after this commit. The query-proxmox-support QMP function has been left as part of the "PVE-Backup: Proxmox backup patches for QEMU" patch, because it's currently only used there. If it ever is used elsewhere too, it can be split out from there. The recent alloc-track and BQL-related savevm-async changes have been left separate for now, because it's not 100% clear they are the best approach yet. This depends on what upstream decides about the BQL stuff and whether and what kind of issues with the changes pop up. The qemu-img dd snapshot patch has been re-ordered to after the other qemu-img dd patches. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:56 +03:00
+ '*key_password': 'str', '*namespace': 'str' } }
+
##
# @BlockdevOptionsNVMe:
#
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
@@ -4945,6 +4957,7 @@
'nfs': 'BlockdevOptionsNfs',
'null-aio': 'BlockdevOptionsNull',
'null-co': 'BlockdevOptionsNull',
+ 'pbs': 'BlockdevOptionsPbs',
'nvme': 'BlockdevOptionsNVMe',
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
'nvme-io_uring': { 'type': 'BlockdevOptionsNvmeIoUring',
'if': 'CONFIG_BLKIO' },
diff --git a/qapi/pragma.json b/qapi/pragma.json
update submodule and patches to QEMU 8.2.2 This version includes both the AioContext lock and the block graph lock, so there might be some deadlocks lurking. It's not possible to disable the block graph lock like was done in QEMU 8.1, because there are no changes like the function bdrv_schedule_unref() that require it. QEMU 9.0 will finally get rid of the AioContext locking. During live-restore with a VirtIO SCSI drive with iothread there is a known racy deadlock related to the AioContext lock. Not new [1], but not sure if more likely now. Should be fixed in QEMU 9.0. The block graph lock comes with annotations that can be checked by clang's TSA. This required changes to the block drivers, i.e. alloc-track, pbs, zeroinit as well as taking the appropriate locks in pve-backup, savevm-async, vma-reader. Local variable shadowing is prohibited via a compiler flag now, required slight adaptation in vma.c. Major changes only affect alloc-track: * It is not possible to call a generated co-wrapper like bdrv_get_info() while holding the block graph lock exclusively [0], which does happen during initialization of alloc-track when the backing hd is set and the refresh_limits driver callback is invoked. The bdrv_get_info() call to get the cluster size is moved to directly after opening the file child in track_open(). The important thing is that at least the request alignment for the write target is used, because then the RMW cycle in bdrv_pwritev will gather enough data from the backing file. Partial cluster allocations in the target are not a fundamental issue, because the driver returns its allocation status based on the bitmap, so any other data that maps to the same cluster will still be copied later by a stream job (or during writes to that cluster). * Replacing the node cannot be done in the track_co_change_backing_file() callback, because it is a coroutine and cannot hold the block graph lock exclusively. So it is moved to the stream job itself with the auto-remove option not having an effect anymore (qemu-server would always set it anyways). In the future, there could either be a special option for the stream job, or maybe the upcoming blockdev-replace QMP command can be used. Replacing the backing child is actually already done in the stream job, so no need to do it in the track_co_change_backing_file() callback. It also cannot be called from a coroutine. Looking at the implementation in the qcow2 driver, it doesn't seem to be intended to change the backing child itself, just update driver-internal state. Other changes: * alloc-track: Error out early when used without auto-remove. Since replacing the node now happens in the stream job, where the option cannot be read from (it's internal to the driver), it will always be treated as 'on'. Makes sure to have users beside qemu-server notice the change (should they even exist). The option can be fully dropped in the future while adding a version guard in qemu-server. * alloc-track: Avoid seemingly superfluous child permission update. Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix deadlock during drop" where the dropping is not rescheduled and delayed anymore or some upstream change). Replacing the block node will already update the permissions of the new node (which was the file child before). Should there really be some issue, instead of having a drop state, this could also be just based off the fact whether there is still a backing child. Dumping the cumulative (shared) permissions for the BDS with a debug print yields the same values after this patch and with QEMU 8.1, namely 3 and 5. * PBS block driver: compile unconditionally. Proxmox VE always needs it and something in the build process changed to make it not enabled by default. Probably would need to move the build option to meson otherwise. * backup: job unreferencing during cleanup needs to happen outside of coroutine, so it was moved to before invoking the clean * mirror: Cherry-pick stable fix to avoid potential deadlock. * savevm-async: migrate_init now can fail, so propagate potential error. * savevm-async: compression counters are not accessible outside migration/ram-compress now, so drop code that prophylactically set it to zero. [0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/ [1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2024-04-25 18:21:28 +03:00
index eae9f54700..03467983b3 100644
--- a/qapi/pragma.json
+++ b/qapi/pragma.json
@@ -45,6 +45,7 @@
'BlockInfo', # query-block
'BlockdevAioOptions', # blockdev-add, -blockdev
'BlockdevDriver', # blockdev-add, query-blockstats, ...
+ 'BlockdevOptionsPbs', # for PBS backwards compat
'BlockdevVmdkAdapterType', # blockdev-create (to match VMDK spec)
'BlockdevVmdkSubformat', # blockdev-create (to match VMDK spec)
'ColoCompareProperties', # object_add, -object