pve-qemu-qoup/debian/patches/pve/0033-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch

409 lines
13 KiB
Diff
Raw Normal View History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Stefan Reiter <s.reiter@proxmox.com>
Date: Wed, 8 Jul 2020 09:50:54 +0200
Subject: [PATCH] PVE: Add PBS block driver to map backup archives into VMs
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[error cleanups, file_open implementation]
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
[adapt to changed function signatures]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
---
block/meson.build | 3 +
block/pbs.c | 276 +++++++++++++++++++++++++++++++++++++++++++
configure | 9 ++
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
meson.build | 2 +-
qapi/block-core.json | 13 ++
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
5 files changed, 302 insertions(+), 1 deletion(-)
create mode 100644 block/pbs.c
diff --git a/block/meson.build b/block/meson.build
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
index 2783b77e9c..a26a69434e 100644
--- a/block/meson.build
+++ b/block/meson.build
@@ -53,6 +53,9 @@ block_ss.add(files(
'../pve-backup.c',
), libproxmox_backup_qemu)
+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: files('pbs.c'))
+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: libproxmox_backup_qemu)
+
softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
diff --git a/block/pbs.c b/block/pbs.c
new file mode 100644
index 0000000000..0b05ea9080
--- /dev/null
+++ b/block/pbs.c
@@ -0,0 +1,276 @@
+/*
+ * Proxmox Backup Server read-only block driver
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qstring.h"
+#include "qemu/module.h"
+#include "qemu/option.h"
+#include "qemu/cutils.h"
+#include "block/block_int.h"
+
+#include <proxmox-backup-qemu.h>
+
+#define PBS_OPT_REPOSITORY "repository"
+#define PBS_OPT_SNAPSHOT "snapshot"
+#define PBS_OPT_ARCHIVE "archive"
+#define PBS_OPT_KEYFILE "keyfile"
+#define PBS_OPT_PASSWORD "password"
+#define PBS_OPT_FINGERPRINT "fingerprint"
+#define PBS_OPT_ENCRYPTION_PASSWORD "key_password"
+
+typedef struct {
+ ProxmoxRestoreHandle *conn;
+ char aid;
+ int64_t length;
+
+ char *repository;
+ char *snapshot;
+ char *archive;
+} BDRVPBSState;
+
+static QemuOptsList runtime_opts = {
+ .name = "pbs",
+ .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
+ .desc = {
+ {
+ .name = PBS_OPT_REPOSITORY,
+ .type = QEMU_OPT_STRING,
+ .help = "The server address and repository to connect to.",
+ },
+ {
+ .name = PBS_OPT_SNAPSHOT,
+ .type = QEMU_OPT_STRING,
+ .help = "The snapshot to read.",
+ },
+ {
+ .name = PBS_OPT_ARCHIVE,
+ .type = QEMU_OPT_STRING,
+ .help = "Which archive within the snapshot should be accessed.",
+ },
+ {
+ .name = PBS_OPT_PASSWORD,
+ .type = QEMU_OPT_STRING,
+ .help = "Server password. Can be passed as env var 'PBS_PASSWORD'.",
+ },
+ {
+ .name = PBS_OPT_FINGERPRINT,
+ .type = QEMU_OPT_STRING,
+ .help = "Server fingerprint. Can be passed as env var 'PBS_FINGERPRINT'.",
+ },
+ {
+ .name = PBS_OPT_ENCRYPTION_PASSWORD,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: Key password. Can be passed as env var 'PBS_ENCRYPTION_PASSWORD'.",
+ },
+ {
+ .name = PBS_OPT_KEYFILE,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: The path to the keyfile to use.",
+ },
+ { /* end of list */ }
+ },
+};
+
+
+// filename format:
+// pbs:repository=<repo>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
+static void pbs_parse_filename(const char *filename, QDict *options,
+ Error **errp)
+{
+
+ if (!strstart(filename, "pbs:", &filename)) {
+ if (errp) error_setg(errp, "pbs_parse_filename failed - missing 'pbs:' prefix");
+ }
+
+
+ QemuOpts *opts = qemu_opts_parse_noisily(&runtime_opts, filename, false);
+ if (!opts) {
+ if (errp) error_setg(errp, "pbs_parse_filename failed");
+ return;
+ }
+
+ qemu_opts_to_qdict(opts, options);
+
+ qemu_opts_del(opts);
+}
+
+static int pbs_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
+{
+ QemuOpts *opts;
+ BDRVPBSState *s = bs->opaque;
+ char *pbs_error = NULL;
+
+ opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
+ qemu_opts_absorb_qdict(opts, options, &error_abort);
+
+ s->repository = g_strdup(qemu_opt_get(opts, PBS_OPT_REPOSITORY));
+ s->snapshot = g_strdup(qemu_opt_get(opts, PBS_OPT_SNAPSHOT));
+ s->archive = g_strdup(qemu_opt_get(opts, PBS_OPT_ARCHIVE));
+ const char *keyfile = qemu_opt_get(opts, PBS_OPT_KEYFILE);
+ const char *password = qemu_opt_get(opts, PBS_OPT_PASSWORD);
+ const char *fingerprint = qemu_opt_get(opts, PBS_OPT_FINGERPRINT);
+ const char *key_password = qemu_opt_get(opts, PBS_OPT_ENCRYPTION_PASSWORD);
+
+ if (!password) {
+ password = getenv("PBS_PASSWORD");
+ }
+ if (!fingerprint) {
+ fingerprint = getenv("PBS_FINGERPRINT");
+ }
+ if (!key_password) {
+ key_password = getenv("PBS_ENCRYPTION_PASSWORD");
+ }
+
+ /* connect to PBS server in read mode */
+ s->conn = proxmox_restore_new(s->repository, s->snapshot, password,
+ keyfile, key_password, fingerprint, &pbs_error);
+
+ /* invalidates qemu_opt_get char pointers from above */
+ qemu_opts_del(opts);
+
+ if (!s->conn) {
+ if (pbs_error && errp) error_setg(errp, "PBS restore_new failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ENOMEM;
+ }
+
+ int ret = proxmox_restore_connect(s->conn, &pbs_error);
+ if (ret < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS connect failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ECONNREFUSED;
+ }
+
+ /* acquire handle and length */
+ s->aid = proxmox_restore_open_image(s->conn, s->archive, &pbs_error);
+ if (s->aid < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS open_image failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ENODEV;
+ }
+ s->length = proxmox_restore_get_image_length(s->conn, s->aid, &pbs_error);
+ if (s->length < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS get_image_length failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pbs_file_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
+{
+ return pbs_open(bs, options, flags, errp);
+}
+
+static void pbs_close(BlockDriverState *bs) {
+ BDRVPBSState *s = bs->opaque;
+ g_free(s->repository);
+ g_free(s->snapshot);
+ g_free(s->archive);
+ proxmox_restore_disconnect(s->conn);
+}
+
+static int64_t pbs_getlength(BlockDriverState *bs)
+{
+ BDRVPBSState *s = bs->opaque;
+ return s->length;
+}
+
+typedef struct ReadCallbackData {
+ Coroutine *co;
+ AioContext *ctx;
+} ReadCallbackData;
+
+static void read_callback(void *callback_data)
+{
+ ReadCallbackData *rcb = callback_data;
+ aio_co_schedule(rcb->ctx, rcb->co);
+}
+
+static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
+ int64_t offset, int64_t bytes,
+ QEMUIOVector *qiov, BdrvRequestFlags flags)
+{
+ BDRVPBSState *s = bs->opaque;
+ int ret;
+ char *pbs_error = NULL;
+ uint8_t *buf = malloc(bytes);
+
+ if (offset < 0 || bytes < 0) {
+ fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
+ return -EINVAL;
+ }
+
+ ReadCallbackData rcb = {
+ .co = qemu_coroutine_self(),
+ .ctx = bdrv_get_aio_context(bs),
+ };
+
+ proxmox_restore_read_image_at_async(s->conn, s->aid, buf, (uint64_t)offset, (uint64_t)bytes,
+ read_callback, (void *) &rcb, &ret, &pbs_error);
+
+ qemu_coroutine_yield();
+
+ if (ret < 0) {
+ fprintf(stderr, "error during PBS read: %s\n", pbs_error ? pbs_error : "unknown error");
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -EIO;
+ }
+
+ qemu_iovec_from_buf(qiov, 0, buf, bytes);
+ free(buf);
+
+ return ret;
+}
+
+static coroutine_fn int pbs_co_pwritev(BlockDriverState *bs,
+ int64_t offset, int64_t bytes,
+ QEMUIOVector *qiov, BdrvRequestFlags flags)
+{
+ fprintf(stderr, "pbs-bdrv: cannot write to backup file, make sure "
+ "any attached disk devices are set to read-only!\n");
+ return -EPERM;
+}
+
+static void pbs_refresh_filename(BlockDriverState *bs)
+{
+ BDRVPBSState *s = bs->opaque;
+ snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
+ s->repository, s->snapshot, s->archive);
+}
+
+static const char *const pbs_strong_runtime_opts[] = {
+ NULL
+};
+
+static BlockDriver bdrv_pbs_co = {
+ .format_name = "pbs",
+ .protocol_name = "pbs",
+ .instance_size = sizeof(BDRVPBSState),
+
+ .bdrv_parse_filename = pbs_parse_filename,
+
+ .bdrv_file_open = pbs_file_open,
+ .bdrv_open = pbs_open,
+ .bdrv_close = pbs_close,
+ .bdrv_getlength = pbs_getlength,
+
+ .bdrv_co_preadv = pbs_co_preadv,
+ .bdrv_co_pwritev = pbs_co_pwritev,
+
+ .bdrv_refresh_filename = pbs_refresh_filename,
+ .strong_runtime_opts = pbs_strong_runtime_opts,
+};
+
+static void bdrv_pbs_init(void)
+{
+ bdrv_register(&bdrv_pbs_co);
+}
+
+block_init(bdrv_pbs_init);
diff --git a/configure b/configure
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
index 72ab03f11a..7203c270ec 100755
--- a/configure
+++ b/configure
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
@@ -309,6 +309,7 @@ linux_user=""
bsd_user=""
pie=""
coroutine=""
+pbs_bdrv="yes"
plugins="$default_feature"
meson=""
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
meson_args=""
@@ -902,6 +903,10 @@ for opt do
--enable-uuid|--disable-uuid)
echo "$0: $opt is obsolete, UUID support is always built" >&2
;;
+ --disable-pbs-bdrv) pbs_bdrv="no"
+ ;;
+ --enable-pbs-bdrv) pbs_bdrv="yes"
+ ;;
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
--with-git=*) git="$optarg"
;;
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
--with-git-submodules=*)
@@ -1087,6 +1092,7 @@ cat << EOF
debug-info debugging information
safe-stack SafeStack Stack Smash Protection. Depends on
clang/llvm >= 3.7 and requires coroutine backend ucontext.
+ pbs-bdrv Proxmox backup server read-only block driver support
NOTE: The object files are built at the place where configure is launched
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
EOF
@@ -2463,6 +2469,9 @@ echo "TARGET_DIRS=$target_list" >> $config_host_mak
if test "$modules" = "yes"; then
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
+if test "$pbs_bdrv" = "yes" ; then
+ echo "CONFIG_PBS_BDRV=y" >> $config_host_mak
+fi
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
diff --git a/meson.build b/meson.build
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
index f48d2e0457..be4785e2f6 100644
--- a/meson.build
+++ b/meson.build
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
@@ -3986,7 +3986,7 @@ summary_info += {'bzip2 support': libbzip2}
summary_info += {'lzfse support': liblzfse}
summary_info += {'zstd support': zstd}
summary_info += {'NUMA host support': numa}
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
-summary_info += {'capstone': capstone}
+summary_info += {'PBS bdrv support': config_host.has_key('CONFIG_PBS_BDRV')}
summary_info += {'libpmem support': libpmem}
summary_info += {'libdaxctl support': libdaxctl}
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
summary_info += {'libudev': libudev}
diff --git a/qapi/block-core.json b/qapi/block-core.json
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
index 4120052690..96bc696aaa 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
@@ -3099,6 +3099,7 @@
'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
{ 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
+ 'pbs',
'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
##
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
@@ -3171,6 +3172,17 @@
{ 'struct': 'BlockdevOptionsNull',
'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } }
+##
+# @BlockdevOptionsPbs:
+#
+# Driver specific block device options for the PBS backend.
+#
+##
+{ 'struct': 'BlockdevOptionsPbs',
+ 'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
+ '*keyfile': 'str', '*password': 'str', '*fingerprint': 'str',
+ '*key_password': 'str' } }
+
##
# @BlockdevOptionsNVMe:
#
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
@@ -4455,6 +4467,7 @@
'nfs': 'BlockdevOptionsNfs',
'null-aio': 'BlockdevOptionsNull',
'null-co': 'BlockdevOptionsNull',
+ 'pbs': 'BlockdevOptionsPbs',
'nvme': 'BlockdevOptionsNVMe',
'parallels': 'BlockdevOptionsGenericFormat',
'preallocate':'BlockdevOptionsPreallocate',