pve-qemu-qoup/debian/patches/pve/0033-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch

423 lines
14 KiB
Diff
Raw Normal View History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Stefan Reiter <s.reiter@proxmox.com>
Date: Wed, 8 Jul 2020 09:50:54 +0200
Subject: [PATCH] PVE: Add PBS block driver to map backup archives into VMs
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[error cleanups, file_open implementation]
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
[FE: adapt to changed function signatures
make pbs_co_preadv return values consistent with QEMU]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
block/meson.build | 3 +
block/pbs.c | 276 +++++++++++++++++++++++++++++++++++++++++++
configure | 9 ++
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
meson.build | 2 +-
qapi/block-core.json | 13 ++
qapi/pragma.json | 1 +
6 files changed, 303 insertions(+), 1 deletion(-)
create mode 100644 block/pbs.c
diff --git a/block/meson.build b/block/meson.build
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
index e995ae72b9..7ef2fa72d5 100644
--- a/block/meson.build
+++ b/block/meson.build
@@ -53,6 +53,9 @@ block_ss.add(files(
'../pve-backup.c',
), libproxmox_backup_qemu)
+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: files('pbs.c'))
+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: libproxmox_backup_qemu)
+
softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
softmmu_ss.add(files('block-ram-registrar.c'))
diff --git a/block/pbs.c b/block/pbs.c
new file mode 100644
index 0000000000..9d1f1f39d4
--- /dev/null
+++ b/block/pbs.c
@@ -0,0 +1,276 @@
+/*
+ * Proxmox Backup Server read-only block driver
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qstring.h"
+#include "qemu/module.h"
+#include "qemu/option.h"
+#include "qemu/cutils.h"
+#include "block/block_int.h"
+
+#include <proxmox-backup-qemu.h>
+
+#define PBS_OPT_REPOSITORY "repository"
+#define PBS_OPT_SNAPSHOT "snapshot"
+#define PBS_OPT_ARCHIVE "archive"
+#define PBS_OPT_KEYFILE "keyfile"
+#define PBS_OPT_PASSWORD "password"
+#define PBS_OPT_FINGERPRINT "fingerprint"
+#define PBS_OPT_ENCRYPTION_PASSWORD "key_password"
+
+typedef struct {
+ ProxmoxRestoreHandle *conn;
+ char aid;
+ int64_t length;
+
+ char *repository;
+ char *snapshot;
+ char *archive;
+} BDRVPBSState;
+
+static QemuOptsList runtime_opts = {
+ .name = "pbs",
+ .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
+ .desc = {
+ {
+ .name = PBS_OPT_REPOSITORY,
+ .type = QEMU_OPT_STRING,
+ .help = "The server address and repository to connect to.",
+ },
+ {
+ .name = PBS_OPT_SNAPSHOT,
+ .type = QEMU_OPT_STRING,
+ .help = "The snapshot to read.",
+ },
+ {
+ .name = PBS_OPT_ARCHIVE,
+ .type = QEMU_OPT_STRING,
+ .help = "Which archive within the snapshot should be accessed.",
+ },
+ {
+ .name = PBS_OPT_PASSWORD,
+ .type = QEMU_OPT_STRING,
+ .help = "Server password. Can be passed as env var 'PBS_PASSWORD'.",
+ },
+ {
+ .name = PBS_OPT_FINGERPRINT,
+ .type = QEMU_OPT_STRING,
+ .help = "Server fingerprint. Can be passed as env var 'PBS_FINGERPRINT'.",
+ },
+ {
+ .name = PBS_OPT_ENCRYPTION_PASSWORD,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: Key password. Can be passed as env var 'PBS_ENCRYPTION_PASSWORD'.",
+ },
+ {
+ .name = PBS_OPT_KEYFILE,
+ .type = QEMU_OPT_STRING,
+ .help = "Optional: The path to the keyfile to use.",
+ },
+ { /* end of list */ }
+ },
+};
+
+
+// filename format:
+// pbs:repository=<repo>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
+static void pbs_parse_filename(const char *filename, QDict *options,
+ Error **errp)
+{
+
+ if (!strstart(filename, "pbs:", &filename)) {
+ if (errp) error_setg(errp, "pbs_parse_filename failed - missing 'pbs:' prefix");
+ }
+
+
+ QemuOpts *opts = qemu_opts_parse_noisily(&runtime_opts, filename, false);
+ if (!opts) {
+ if (errp) error_setg(errp, "pbs_parse_filename failed");
+ return;
+ }
+
+ qemu_opts_to_qdict(opts, options);
+
+ qemu_opts_del(opts);
+}
+
+static int pbs_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
+{
+ QemuOpts *opts;
+ BDRVPBSState *s = bs->opaque;
+ char *pbs_error = NULL;
+
+ opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
+ qemu_opts_absorb_qdict(opts, options, &error_abort);
+
+ s->repository = g_strdup(qemu_opt_get(opts, PBS_OPT_REPOSITORY));
+ s->snapshot = g_strdup(qemu_opt_get(opts, PBS_OPT_SNAPSHOT));
+ s->archive = g_strdup(qemu_opt_get(opts, PBS_OPT_ARCHIVE));
+ const char *keyfile = qemu_opt_get(opts, PBS_OPT_KEYFILE);
+ const char *password = qemu_opt_get(opts, PBS_OPT_PASSWORD);
+ const char *fingerprint = qemu_opt_get(opts, PBS_OPT_FINGERPRINT);
+ const char *key_password = qemu_opt_get(opts, PBS_OPT_ENCRYPTION_PASSWORD);
+
+ if (!password) {
+ password = getenv("PBS_PASSWORD");
+ }
+ if (!fingerprint) {
+ fingerprint = getenv("PBS_FINGERPRINT");
+ }
+ if (!key_password) {
+ key_password = getenv("PBS_ENCRYPTION_PASSWORD");
+ }
+
+ /* connect to PBS server in read mode */
+ s->conn = proxmox_restore_new(s->repository, s->snapshot, password,
+ keyfile, key_password, fingerprint, &pbs_error);
+
+ /* invalidates qemu_opt_get char pointers from above */
+ qemu_opts_del(opts);
+
+ if (!s->conn) {
+ if (pbs_error && errp) error_setg(errp, "PBS restore_new failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ENOMEM;
+ }
+
+ int ret = proxmox_restore_connect(s->conn, &pbs_error);
+ if (ret < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS connect failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ECONNREFUSED;
+ }
+
+ /* acquire handle and length */
+ s->aid = proxmox_restore_open_image(s->conn, s->archive, &pbs_error);
+ if (s->aid < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS open_image failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -ENODEV;
+ }
+ s->length = proxmox_restore_get_image_length(s->conn, s->aid, &pbs_error);
+ if (s->length < 0) {
+ if (pbs_error && errp) error_setg(errp, "PBS get_image_length failed: %s", pbs_error);
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pbs_file_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
+{
+ return pbs_open(bs, options, flags, errp);
+}
+
+static void pbs_close(BlockDriverState *bs) {
+ BDRVPBSState *s = bs->opaque;
+ g_free(s->repository);
+ g_free(s->snapshot);
+ g_free(s->archive);
+ proxmox_restore_disconnect(s->conn);
+}
+
+static int64_t pbs_getlength(BlockDriverState *bs)
+{
+ BDRVPBSState *s = bs->opaque;
+ return s->length;
+}
+
+typedef struct ReadCallbackData {
+ Coroutine *co;
+ AioContext *ctx;
+} ReadCallbackData;
+
+static void read_callback(void *callback_data)
+{
+ ReadCallbackData *rcb = callback_data;
+ aio_co_schedule(rcb->ctx, rcb->co);
+}
+
+static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
+ int64_t offset, int64_t bytes,
+ QEMUIOVector *qiov, BdrvRequestFlags flags)
+{
+ BDRVPBSState *s = bs->opaque;
+ int ret;
+ char *pbs_error = NULL;
+ uint8_t *buf = malloc(bytes);
+
+ if (offset < 0 || bytes < 0) {
+ fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
+ return -EIO;
+ }
+
+ ReadCallbackData rcb = {
+ .co = qemu_coroutine_self(),
+ .ctx = bdrv_get_aio_context(bs),
+ };
+
+ proxmox_restore_read_image_at_async(s->conn, s->aid, buf, (uint64_t)offset, (uint64_t)bytes,
+ read_callback, (void *) &rcb, &ret, &pbs_error);
+
+ qemu_coroutine_yield();
+
+ if (ret < 0) {
+ fprintf(stderr, "error during PBS read: %s\n", pbs_error ? pbs_error : "unknown error");
+ if (pbs_error) proxmox_backup_free_error(pbs_error);
+ return -EIO;
+ }
+
+ qemu_iovec_from_buf(qiov, 0, buf, bytes);
+ free(buf);
+
+ return 0;
+}
+
+static coroutine_fn int pbs_co_pwritev(BlockDriverState *bs,
+ int64_t offset, int64_t bytes,
+ QEMUIOVector *qiov, BdrvRequestFlags flags)
+{
+ fprintf(stderr, "pbs-bdrv: cannot write to backup file, make sure "
+ "any attached disk devices are set to read-only!\n");
+ return -EPERM;
+}
+
+static void pbs_refresh_filename(BlockDriverState *bs)
+{
+ BDRVPBSState *s = bs->opaque;
+ snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
+ s->repository, s->snapshot, s->archive);
+}
+
+static const char *const pbs_strong_runtime_opts[] = {
+ NULL
+};
+
+static BlockDriver bdrv_pbs_co = {
+ .format_name = "pbs",
+ .protocol_name = "pbs",
+ .instance_size = sizeof(BDRVPBSState),
+
+ .bdrv_parse_filename = pbs_parse_filename,
+
+ .bdrv_file_open = pbs_file_open,
+ .bdrv_open = pbs_open,
+ .bdrv_close = pbs_close,
+ .bdrv_getlength = pbs_getlength,
+
+ .bdrv_co_preadv = pbs_co_preadv,
+ .bdrv_co_pwritev = pbs_co_pwritev,
+
+ .bdrv_refresh_filename = pbs_refresh_filename,
+ .strong_runtime_opts = pbs_strong_runtime_opts,
+};
+
+static void bdrv_pbs_init(void)
+{
+ bdrv_register(&bdrv_pbs_co);
+}
+
+block_init(bdrv_pbs_init);
diff --git a/configure b/configure
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
index 26c7bc5154..c587e986c7 100755
--- a/configure
+++ b/configure
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
@@ -285,6 +285,7 @@ linux_user=""
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
bsd_user=""
pie=""
coroutine=""
+pbs_bdrv="yes"
plugins="$default_feature"
meson=""
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
ninja=""
@@ -864,6 +865,10 @@ for opt do
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
--enable-uuid|--disable-uuid)
echo "$0: $opt is obsolete, UUID support is always built" >&2
;;
+ --disable-pbs-bdrv) pbs_bdrv="no"
+ ;;
+ --enable-pbs-bdrv) pbs_bdrv="yes"
+ ;;
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
--with-git=*) git="$optarg"
;;
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
--with-git-submodules=*)
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
@@ -1049,6 +1054,7 @@ cat << EOF
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
debug-info debugging information
safe-stack SafeStack Stack Smash Protection. Depends on
clang/llvm >= 3.7 and requires coroutine backend ucontext.
+ pbs-bdrv Proxmox backup server read-only block driver support
NOTE: The object files are built at the place where configure is launched
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
EOF
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
@@ -2372,6 +2378,9 @@ echo "TARGET_DIRS=$target_list" >> $config_host_mak
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
if test "$modules" = "yes"; then
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
+if test "$pbs_bdrv" = "yes" ; then
+ echo "CONFIG_PBS_BDRV=y" >> $config_host_mak
+fi
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
diff --git a/meson.build b/meson.build
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
index 63ea813a9a..f7f5b3f253 100644
--- a/meson.build
+++ b/meson.build
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
@@ -3978,7 +3978,7 @@ summary_info += {'bzip2 support': libbzip2}
summary_info += {'lzfse support': liblzfse}
summary_info += {'zstd support': zstd}
summary_info += {'NUMA host support': numa}
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
-summary_info += {'capstone': capstone}
+summary_info += {'PBS bdrv support': config_host.has_key('CONFIG_PBS_BDRV')}
summary_info += {'libpmem support': libpmem}
summary_info += {'libdaxctl support': libdaxctl}
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
summary_info += {'libudev': libudev}
diff --git a/qapi/block-core.json b/qapi/block-core.json
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
index 5ac6276dc1..45b63dfe26 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
@@ -3103,6 +3103,7 @@
'parallels', 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum',
'raw', 'rbd',
{ 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
+ 'pbs',
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
'ssh', 'throttle', 'vdi', 'vhdx',
{ 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' },
{ 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' },
@@ -3179,6 +3180,17 @@
{ 'struct': 'BlockdevOptionsNull',
'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } }
+##
+# @BlockdevOptionsPbs:
+#
+# Driver specific block device options for the PBS backend.
+#
+##
+{ 'struct': 'BlockdevOptionsPbs',
+ 'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
+ '*keyfile': 'str', '*password': 'str', '*fingerprint': 'str',
+ '*key_password': 'str' } }
+
##
# @BlockdevOptionsNVMe:
#
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
@@ -4531,6 +4543,7 @@
'nfs': 'BlockdevOptionsNfs',
'null-aio': 'BlockdevOptionsNull',
'null-co': 'BlockdevOptionsNull',
+ 'pbs': 'BlockdevOptionsPbs',
'nvme': 'BlockdevOptionsNVMe',
update submodule and patches to 7.2.0 User-facing breaking change: The slirp submodule for user networking got removed. It would be necessary to add the --enable-slirp option to the build and/or install the appropriate library to continue building it. Since PVE is not explicitly supporting it, it would require additionally installing the libslirp0 package on all installations and there is *very* little mention on the community forum when searching for "slirp" or "netdev user", the plan is to only enable it again if there is some real demand for it. Notable changes: * The big change for this release is the rework of job locking, using a job mutex and introducing _locked() variants of job API functions moving away from call-side AioContext locking. See (in the qemu submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and remove Aiocontext locks") and previous commits for context. Changes required for the backup patches: * Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job API functions where appropriate (many are only availalbe as a _locked() variant). * Remove acquiring/releasing AioContext around functions taking the job mutex lock internally. The patch introducing sequential transaction support for jobs needs to temporarily unlock the job mutex to call job_start() when starting the next job in the transaction. * The zeroinit block driver now marks its child as primary. The documentation in include/block/block-common.h states: > Filter node has exactly one FILTERED|PRIMARY child, and may have > other children which must not have these bits Without this, an assert will trigger when copying to a zeroinit target with qemu-img convert, because bdrv_child_cb_attach() expects any non-PRIMARY child to be not FILTERED: > qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw > qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion > `!(child->role & BDRV_CHILD_FILTERED)' failed. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-12-14 17:16:32 +03:00
'nvme-io_uring': { 'type': 'BlockdevOptionsNvmeIoUring',
'if': 'CONFIG_BLKIO' },
diff --git a/qapi/pragma.json b/qapi/pragma.json
index f2097b9020..5ab1890519 100644
--- a/qapi/pragma.json
+++ b/qapi/pragma.json
@@ -47,6 +47,7 @@
'BlockInfo', # query-block
'BlockdevAioOptions', # blockdev-add, -blockdev
'BlockdevDriver', # blockdev-add, query-blockstats, ...
+ 'BlockdevOptionsPbs', # for PBS backwards compat
'BlockdevVmdkAdapterType', # blockdev-create (to match VMDK spec)
'BlockdevVmdkSubformat', # blockdev-create (to match VMDK spec)
'ColoCompareProperties', # object_add, -object