mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-30 21:09:38 +03:00
fe7c15985b
89 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Alexander Motin
|
f15d6a5457 |
Improve logging of 128KB writes
Before my ZIL space optimization few years ago 128KB writes were logged as two 64KB+ records in two 128KB log blocks. After that change it became ~127KB+/1KB+ in two 128KB log blocks to free space in the second block for another record. Unfortunately in case of 128KB only writes, when space in the second block remained unused, that change increased write latency by unbalancing checksum computation and write times between parallel threads. It also didn't help with SLOG space efficiency in that case. This change introduces new 68KB log block size, used for both writes below 67KB and 128KB-sharp writes. Writes of 68-127KB are still using one 128KB block to not increase processing overhead. Writes above 131KB are still using full 128KB blocks, since possible saving there is small. Mixed loads will likely also fall back to previous 128KB, since code uses maximum of the last 16 requested block sizes. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Closes #9409 |
||
|
Prakash Surya
|
e5d1c27e30 |
Enable use of DTRACE_PROBE* macros in "spl" module
This change modifies some of the infrastructure for enabling the use of the DTRACE_PROBE* macros, such that we can use tehm in the "spl" module. Currently, when the DTRACE_PROBE* macros are used, they get expanded to create new functions, and these dynamically generated functions become part of the "zfs" module. Since the "spl" module does not depend on the "zfs" module, the use of DTRACE_PROBE* in the "spl" module would result in undefined symbols being used in the "spl" module. Specifically, DTRACE_PROBE* would turn into a function call, and the function being called would be a symbol only contained in the "zfs" module; which results in a linker and/or runtime error. Thus, this change adds the necessary logic to the "spl" module, to mirror the tracing functionality available to the "zfs" module. After this change, we'll have a "trace_zfs.h" header file which defines the probes available only to the "zfs" module, and a "trace_spl.h" header file which defines the probes available only to the "spl" module. Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <prakash.surya@delphix.com> Closes #9525 |
||
|
Matthew Macy
|
eedb3a62b9 |
Make zil_async_to_sync visible to platform code
FreeBSD's zvol platform code requires access to the zil_async_to_sync() function. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9440 |
||
|
Paul Dagnelie
|
ca5777793e |
Reduce loaded range tree memory usage
This patch implements a new tree structure for ZFS, and uses it to
store range trees more efficiently.
The new structure is approximately a B-tree, though there are some
small differences from the usual characterizations. The tree has core
nodes and leaf nodes; each contain data elements, which the elements
in the core nodes acting as separators between its children. The
difference between core and leaf nodes is that the core nodes have an
array of children, while leaf nodes don't. Every node in the tree may
be only partially full; in most cases, they are all at least 50% full
(in terms of element count) except for the root node, which can be
less full. Underfull nodes will steal from their neighbors or merge to
remain full enough, while overfull nodes will split in two. The data
elements are contained in tree-controlled buffers; they are copied
into these on insertion, and overwritten on deletion. This means that
the elements are not independently allocated, which reduces overhead,
but also means they can't be shared between trees (and also that
pointers to them are only valid until a side-effectful tree operation
occurs). The overhead varies based on how dense the tree is, but is
usually on the order of about 50% of the element size; the per-node
overheads are very small, and so don't make a significant difference.
The trees can accept arbitrary records; they accept a size and a
comparator to allow them to be used for a variety of purposes.
The new trees replace the AVL trees used in the range trees today.
Currently, the range_seg_t structure contains three 8 byte integers
of payload and two 24 byte avl_tree_node_ts to handle its storage in
both an offset-sorted tree and a size-sorted tree (total size: 64
bytes). In the new model, the range seg structures are usually two 4
byte integers, but a separate one needs to exist for the size-sorted
and offset-sorted tree. Between the raw size, the 50% overhead, and
the double storage, the new btrees are expected to use 8*1.5*2 = 24
bytes per record, or 33.3% as much memory as the AVL trees (this is
for the purposes of storing metaslab range trees; for other purposes,
like scrubs, they use ~50% as much memory).
We reduced the size of the payload in the range segments by teaching
range trees about starting offsets and shifts; since metaslabs have a
fixed starting offset, and they all operate in terms of disk sectors,
we can store the ranges using 4-byte integers as long as the size of
the metaslab divided by the sector size is less than 2^32. For 512-byte
sectors, this is a 2^41 (or 2TB) metaslab, which with the default
settings corresponds to a 256PB disk. 4k sector disks can handle
metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not
anticipate disks of this size in the near future, there should be
almost no cases where metaslabs need 64-byte integers to store their
ranges. We do still have the capability to store 64-byte integer ranges
to account for cases where we are storing per-vdev (or per-dnode) trees,
which could reasonably go above the limits discussed. We also do not
store fill information in the compact version of the node, since it
is only used for sorted scrub.
We also optimized the metaslab loading process in various other ways
to offset some inefficiencies in the btree model. While individual
operations (find, insert, remove_from) are faster for the btree than
they are for the avl tree, remove usually requires a find operation,
while in the AVL tree model the element itself suffices. Some clever
changes actually caused an overall speedup in metaslab loading; we use
approximately 40% less cpu to load metaslabs in our tests on Illumos.
Another memory and performance optimization was achieved by changing
what is stored in the size-sorted trees. When a disk is heavily
fragmented, the df algorithm used by default in ZFS will almost always
find a number of small regions in its initial cursor-based search; it
will usually only fall back to the size-sorted tree to find larger
regions. If we increase the size of the cursor-based search slightly,
and don't store segments that are smaller than a tunable size floor
in the size-sorted tree, we can further cut memory usage down to
below 20% of what the AVL trees store. This also results in further
reductions in CPU time spent loading metaslabs.
The 16KiB size floor was chosen because it results in substantial memory
usage reduction while not usually resulting in situations where we can't
find an appropriate chunk with the cursor and are forced to use an
oversized chunk from the size-sorted tree. In addition, even if we do
have to use an oversized chunk from the size-sorted tree, the chunk
would be too small to use for ZIL allocations, so it isn't as big of a
loss as it might otherwise be. And often, more small allocations will
follow the initial one, and the cursor search will now find the
remainder of the chunk we didn't use all of and use it for subsequent
allocations. Practical testing has shown little or no change in
fragmentation as a result of this change.
If the size-sorted tree becomes empty while the offset sorted one still
has entries, it will load all the entries from the offset sorted tree
and disregard the size floor until it is unloaded again. This operation
occurs rarely with the default setting, only on incredibly thoroughly
fragmented pools.
There are some other small changes to zdb to teach it to handle btrees,
but nothing major.
Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy seb@delphix.com
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #9181
|
||
|
Matthew Macy
|
d66620681d |
OpenZFS restructuring - move linux tracing code to platform directories
Move Linux specific tracing headers and source to platform directories and update the build system. Reviewed-by: Allan Jude <allanjude@freebsd.org> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9290 |
||
|
Matthew Macy
|
03fdcb9adc |
Make module tunables cross platform
Adds ZFS_MODULE_PARAM to abstract module parameter setting to operating systems other than Linux. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9230 |
||
|
Andrea Gelmini
|
e1cfd73f7f |
Fix typos in module/zfs/
Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Closes #9240 |
||
|
Chunwei Chen
|
8e556c5ebc |
Fix out-of-order ZIL txtype lost on hardlinked files
We should only call zil_remove_async when an object is removed. However, in current implementation, it is called whenever TX_REMOVE is called. In the case of hardlinked file, every unlink will generate TX_REMOVE and causing operations to be dropped even when the object is not removed. We fix this by only calling zil_remove_async when the file is fully unlinked. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Signed-off-by: Chunwei Chen <david.chen@nutanix.com> Closes #8769 Closes #9061 |
||
|
Matthew Ahrens
|
b8738257c2 |
make zil max block size tunable
We've observed that on some highly fragmented pools, most metaslab allocations are small (~2-8KB), but there are some large, 128K allocations. The large allocations are for ZIL blocks. If there is a lot of fragmentation, the large allocations can be hard to satisfy. The most common impact of this is that we need to check (and thus load) lots of metaslabs from the ZIL allocation code path, causing sync writes to wait for metaslabs to load, which can take a second or more. In the worst case, we may not be able to satisfy the allocation, in which case the ZIL will resort to txg_wait_synced() to ensure the change is on disk. To provide a workaround for this, this change adds a tunable that can reduce the size of ZIL blocks. External-issue: DLPX-61719 Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8865 |
||
|
Richard Laager
|
612c4930dd |
Fix the spelling of deferred
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com> Closes #8626 |
||
|
Sara Hartse
|
a887d653b3 |
Restrict kstats and print real pointers
There are several places where we use zfs_dbgmsg and %p to print pointers. In the Linux kernel, these values obfuscated to prevent information leaks which means the pointers aren't very useful for debugging crash dumps. We decided to restrict the permissions of dbgmsg (and some other kstats while we were at it) and print pointers with %px in zfs_dbgmsg as well as spl_dumpstack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Gallagher <john.gallagher@delphix.com> Signed-off-by: sara hartse <sara.hartse@delphix.com> Closes #8467 Closes #8476 |
||
|
Prakash Surya
|
900d09b285 |
OpenZFS 9962 - zil_commit should omit cache thrash
As a result of the changes made in 8585, it's possible for an excessive amount of vdev flush commands to be issued under some workloads. Specifically, when the workload consists of mostly async write activity, interspersed with some sync write and/or fsync activity, we can end up issuing more flush commands to the underlying storage than is actually necessary. As a result of these flush commands, the write latency and overall throughput of the pool can be poorly impacted (latency increases, throughput decreases). Currently, any time an lwb completes, the vdev(s) written to as a result of that lwb will be issued a flush command. The intenion is so the data written to that vdev is on stable storage, prior to communicating to any waiting threads that their data is safe on disk. The problem with this scheme, is that sometimes an lwb will not have any threads waiting for it to complete. This can occur when there's async activity that gets "converted" to sync requests, as a result of calling the zil_async_to_sync() function via zil_commit_impl(). When this occurs, the current code may issue many lwbs that don't have waiters associated with them, resulting in many flush commands, potentially to the same vdev(s). For example, given a pool with a single vdev, and a single fsync() call that results in 10 lwbs being written out (e.g. due to other async writes), that will result in 10 flush commands to that single vdev (a flush issued after each lwb write completes). Ideally, we'd only issue a single flush command to that vdev, after all 10 lwb writes completed. Further, and most important as it pertains to this change, since the flush commands are often very impactful to the performance of the pool's underlying storage, unnecessarily issuing these flush commands can poorly impact the performance of the lwb writes themselves. Thus, we need to avoid issuing flush commands when possible, in order to acheive the best possible performance out of the pool's underlying storage. This change attempts to address this problem by changing the ZIL's logic to only issue a vdev flush command when it detects an lwb that has a thread waiting for it to complete. When an lwb does not have threads waiting for it, the responsibility of issuing the flush command to the vdevs involved with that lwb's write is passed on to the "next" lwb. It's only once a write for an lwb with waiters completes, do we issue the vdev flush command(s). As a result, now when we issue the flush(s), we will issue them to the vdevs involved with that specific lwb's write, but potentially also to vdevs involved with "previous" lwb writes (i.e. if the previous lwbs did not have waiters associated with them). Thus, in our prior example with 10 lwbs, it's only once the last lwb completes (which will be the lwb containing the waiter for the thread that called fsync) will we issue the vdev flush command; all of the other lwbs will find they have no waiters, so they'll pass the responsibility of the flush to the "next" lwb (until reaching the last lwb that has the waiter). Porting Notes: * Reconciled conflicts with the fastwrite feature. Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Patrick Mooney <patrick.mooney@joyent.com> Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com> Approved by: Joshua M. Clulow <josh@sysmgr.org> Ported-by: Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/9962 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/545190c6 Closes #8188 |
||
|
Prakash Surya
|
53b1f5eac6 |
OpenZFS 9963 - Separate tunable for disabling ZIL vdev flush
Porting Notes: * Add options to zfs-module-parameters(5) man page. * zfs_nocacheflush move to vdev.c instead of vdev_disk.c, since the latter doesn't get built for user space. Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Patrick Mooney <patrick.mooney@joyent.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: George Melikov <mail@gmelikov.ru> Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/9963 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f8fdf68125 Closes #8186 |
||
|
Tom Caputi
|
c04812f964 |
Fix ASSERT in zil_create() during ztest
This patch corrects an ASSERT in zil_create() that will only be true if the call to zio_alloc_zil() does not fail. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #8010 |
||
|
Tom Caputi
|
52ce99dd61 |
Refcounted DSL Crypto Key Mappings
Since native ZFS encryption was merged, we have been fighting against a series of bugs that come down to the same problem: Key mappings (which must be present during all I/O operations) are created and destroyed based on dataset ownership, but I/Os can have traditionally been allowed to "leak" into the next txg after the dataset is disowned. In the past we have attempted to solve this problem by trying to ensure that datasets are disowned ater all I/O is finished by calling txg_wait_synced(), but we have repeatedly found edge cases that need to be squashed and code paths that might incur a high number of txg syncs. This patch attempts to resolve this issue differently, by adding a reference to the key mapping for each txg it is dirtied in. By doing so, we can remove many of the unnecessary calls to txg_wait_synced() we have added in the past and ensure we don't need to deal with this problem in the future. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #7949 |
||
|
Paul Dagnelie
|
492f64e941 |
OpenZFS 9112 - Improve allocation performance on high-end systems
Overview ======== We parallelize the allocation process by creating the concept of "allocators". There are a certain number of allocators per metaslab group, defined by the value of a tunable at pool open time. Each allocator for a given metaslab group has up to 2 active metaslabs; one "primary", and one "secondary". The primary and secondary weight mean the same thing they did in in the pre-allocator world; primary metaslabs are used for most allocations, secondary metaslabs are used for ditto blocks being allocated in the same metaslab group. There is also the CLAIM weight, which has been separated out from the other weights, but that is less important to understanding the patch. The active metaslabs for each allocator are moved from their normal place in the metaslab tree for the group to the back of the tree. This way, they will not be selected for use by other allocators searching for new metaslabs unless all the passive metaslabs are unsuitable for allocations. If that does happen, the allocators will "steal" from each other to ensure that IOs don't fail until there is truly no space left to perform allocations. In addition, the alloc queue for each metaslab group has been broken into a separate queue for each allocator. We don't want to dramatically increase the number of inflight IOs on low-end systems, because it can significantly increase txg times. On the other hand, we want to ensure that there are enough IOs for each allocator to allow for good coalescing before sending the IOs to the disk. As a result, we take a compromise path; each allocator's alloc queue max depth starts at a certain value for every txg. Every time an IO completes, we increase the max depth. This should hopefully provide a good balance between the two failure modes, while not dramatically increasing complexity. We also parallelize the spa_alloc_tree and spa_alloc_lock, which cause very similar contention when selecting IOs to allocate. This parallelization uses the same allocator scheme as metaslab selection. Performance Results =================== Performance improvements from this change can vary significantly based on the number of CPUs in the system, whether or not the system has a NUMA architecture, the speed of the drives, the values for the various tunables, and the workload being performed. For an fio async sequential write workload on a 24 core NUMA system with 256 GB of RAM and 8 128 GB SSDs, there is a roughly 25% performance improvement. Future Work =========== Analysis of the performance of the system with this patch applied shows that a significant new bottleneck is the vdev disk queues, which also need to be parallelized. Prototyping of this change has occurred, and there was a performance improvement, but more work needs to be done before its stability has been verified and it is ready to be upstreamed. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Paul Dagnelie <pcd@delphix.com> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Porting Notes: * Fix reservation test failures by increasing tolerance. OpenZFS-issue: https://illumos.org/issues/9112 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3f3cc3c3 Closes #7682 |
||
|
Prakash Surya
|
ab11916583 |
OpenZFS 9456 - ztest failure in zil_commit_waiter_timeout
Problem ======= Illumos bug 8373 was integrated, which now presents a code path where "dmu_tx_assign" can fail. When "dmu_tx_assign" fails, it will not issue the lwb that was passed in to "zil_lwb_write_issue". As a result, when "zil_lwb_write_issue" returns, the lwb will still be in the "opened" state, just as it was when "zil_lwb_write_issue" was originally called. Solution ======== As a result of this new call path, the failed assertion needs to be modified to be aware of this new possibility. Thus, we can only assert that the lwb is no longer in the "opened" state if the returned lwb is non-null, since we cannot differentiate between the case of "dmu_tx_assign" failing or "zio_alloc_zil" failing within the call to "zil_lwb_write_issue". Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: George Melikov <mail@gmelikov.ru> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Matt Ahrens <mahrens@delphix.com> OpenZFS-issue: https://www.illumos.org/issues/9456 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a8b09f4e Closes #7695 |
||
|
Serapheim Dimitropoulos
|
d2734cce68 |
OpenZFS 9166 - zfs storage pool checkpoint
Details about the motivation of this feature and its usage can
be found in this blogpost:
https://sdimitro.github.io/post/zpool-checkpoint/
A lightning talk of this feature can be found here:
https://www.youtube.com/watch?v=fPQA8K40jAM
Implementation details can be found in big block comment of
spa_checkpoint.c
Side-changes that are relevant to this commit but not explained
elsewhere:
* renames members of "struct metaslab trees to be shorter without
losing meaning
* space_map_{alloc,truncate}() accept a block size as a
parameter. The reason is that in the current state all space
maps that we allocate through the DMU use a global tunable
(space_map_blksz) which defauls to 4KB. This is ok for metaslab
space maps in terms of bandwirdth since they are scattered all
over the disk. But for other space maps this default is probably
not what we want. Examples are device removal's vdev_obsolete_sm
or vdev_chedkpoint_sm from this review. Both of these have a
1:1 relationship with each vdev and could benefit from a bigger
block size.
Porting notes:
* The part of dsl_scan_sync() which handles async destroys has
been moved into the new dsl_process_async_destroys() function.
* Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write
to block device backed pools.
* ZTS:
* Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg".
* Don't use large dd block sizes on /dev/urandom under Linux in
checkpoint_capacity.
* Adopt Delphix-OS's setting of 4 (spa_asize_inflation =
SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed
its attempts to fill the pool
* Create the base and nested pools with sync=disabled to speed up
the "setup" phase.
* Clear labels in test pool between checkpoint tests to avoid
duplicate pool issues.
* The import_rewind_device_replaced test has been marked as "known
to fail" for the reasons listed in its DISCLAIMER.
* New module parameters:
zfs_spa_discard_memory_limit,
zfs_remove_max_bytes_pause (not documented - debugging only)
vdev_max_ms_count (formerly metaslabs_per_vdev)
vdev_min_ms_count
Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://illumos.org/issues/9166
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8
Closes #7570
|
||
|
Paul Zuchowski
|
2ffd89fcb9 |
Wrong error message when removing log device
In the case where the pool is loaded without the crypto keys necessary to playback the intent log, and log device removal is attempted, a generic busy message is received. Change the message to inform the user that the datasets must be mounted. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com> Closes #7518 |
||
|
Brian Behlendorf
|
93ce2b4ca5 |
Update build system and packaging
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.
Build system and packaging:
* Renamed SPL_* autoconf m4 macros to ZFS_*.
* Removed redundant SPL_* autoconf m4 macros.
* Updated the RPM spec files to remove SPL package dependency.
* The zfs package obsoletes the spl package, and the zfs-kmod
package obsoletes the spl-kmod package.
* The zfs-kmod-devel* packages were updated to add compatibility
symlinks under /usr/src/spl-x.y.z until all dependent packages
can be updated. They will be removed in a future release.
* Updated copy-builtin script for in-kernel builds.
* Updated DKMS package to include the spl.ko.
* Updated stale AUTHORS file to include all contributors.
* Updated stale COPYRIGHT and included the SPL as an exception.
* Renamed README.markdown to README.md
* Renamed OPENSOLARIS.LICENSE to LICENSE.
* Renamed DISCLAIMER to NOTICE.
Required code changes:
* Removed redundant HAVE_SPL macro.
* Removed _BOOT from nvpairs since it doesn't apply for Linux.
* Initial header cleanup (removal of empty headers, refactoring).
* Remove SPL repository clone/build from zimport.sh.
* Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
to build issues when forcing C99 compilation.
* Replaced legacy ACCESS_ONCE with READ_ONCE.
* Include needed headers for `current` and `EXPORT_SYMBOL`.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes #7556
|
||
|
Matthew Ahrens
|
a1d477c24c |
OpenZFS 7614, 9064 - zfs device evacuation/removal
OpenZFS 7614 - zfs device evacuation/removal
OpenZFS 9064 - remove_mirror should wait for device removal to complete
This project allows top-level vdevs to be removed from the storage pool
with "zpool remove", reducing the total amount of storage in the pool.
This operation copies all allocated regions of the device to be removed
onto other devices, recording the mapping from old to new location.
After the removal is complete, read and free operations to the removed
(now "indirect") vdev must be remapped and performed at the new location
on disk. The indirect mapping table is kept in memory whenever the pool
is loaded, so there is minimal performance overhead when doing operations
on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries
become "obsolete" because they are no longer used by any block pointers
in the pool. An entry becomes obsolete when all the blocks that use
it are freed. An entry can also become obsolete when all the snapshots
that reference it are deleted, and the block pointers that reference it
have been "remapped" in all filesystems/zvols (and clones). Whenever an
indirect block is written, all the block pointers in it will be "remapped"
to their new (concrete) locations if possible. This process can be
accelerated by using the "zfs remap" command to proactively rewrite all
indirect blocks that reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of
the data that is copied. This makes the process much faster, but if it
were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be
possible to copy the wrong data, when we have the correct data on e.g.
the other side of the mirror.
At the moment, only mirrors and simple top-level vdevs can be removed
and no removal is allowed if any of the top-level vdevs are raidz.
Porting Notes:
* Avoid zero-sized kmem_alloc() in vdev_compact_children().
The device evacuation code adds a dependency that
vdev_compact_children() be able to properly empty the vdev_child
array by setting it to NULL and zeroing vdev_children. Under Linux,
kmem_alloc() and related functions return a sentinel pointer rather
than NULL for zero-sized allocations.
* Remove comment regarding "mpt" driver where zfs_remove_max_segment
is initialized to SPA_MAXBLOCKSIZE.
Change zfs_condense_indirect_commit_entry_delay_ticks to
zfs_condense_indirect_commit_entry_delay_ms for consistency with
most other tunables in which delays are specified in ms.
* ZTS changes:
Use set_tunable rather than mdb
Use zpool sync as appropriate
Use sync_pool instead of sync
Kill jobs during test_removal_with_operation to allow unmount/export
Don't add non-disk names such as "mirror" or "raidz" to $DISKS
Use $TEST_BASE_DIR instead of /tmp
Increase HZ from 100 to 1000 which is more common on Linux
removal_multiple_indirection.ksh
Reduce iterations in order to not time out on the code
coverage builders.
removal_resume_export:
Functionally, the test case is correct but there exists a race
where the kernel thread hasn't been fully started yet and is
not visible. Wait for up to 1 second for the removal thread
to be started before giving up on it. Also, increase the
amount of data copied in order that the removal not finish
before the export has a chance to fail.
* MMP compatibility, the concept of concrete versus non-concrete devices
has slightly changed the semantics of vdev_writeable(). Update
mmp_random_leaf_impl() accordingly.
* Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool
feature which is not supported by OpenZFS.
* Added support for new vdev removal tracepoints.
* Test cases removal_with_zdb and removal_condense_export have been
intentionally disabled. When run manually they pass as intended,
but when running in the automated test environment they produce
unreliable results on the latest Fedora release.
They may work better once the upstream pool import refectoring is
merged into ZoL at which point they will be re-enabled.
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Reece <alex@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
OpenZFS-issue: https://www.illumos.org/issues/7614
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb
Closes #6900
|
||
|
chrisrd
|
5666a994f2 |
Increment zil_itx_needcopy_bytes properly
In zil_lwb_commit() with TX_WRITE, we copy the log write record (lrw) into the log write block (lwb) and send it off using zil_lwb_add_txg(). If we also have WR_NEED_COPY, we additionally copy the lwr's data into the lwb to be sent off. If the lwr + data doesn't fit into the lwb, we send the lrw and as much data as will fit (dnow bytes), then go back and do the same with the remaining data. Each time through this loop we're sending dnow data bytes. I.e. zil_itx_needcopy_bytes should be incremented by dnow. Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlop <chris@onthe.net.au> Closes #6988 Closes #7176 |
||
|
Tom Caputi
|
1b66810bad |
Change os->os_next_write_raw to work per txg
Currently, os_next_write_raw is a single boolean used for determining whether or not the next call to dmu_objset_sync() should write out the objset_phys_t as a raw buffer. Since the boolean is not associated with a txg, the work simply happens during the next txg, which is not necessarily the correct one. In the current implementation this issue was misdiagnosed, resulting in a small hack in dmu_objset_sync() which seemed to resolve the problem. This patch changes os_next_write_raw to be an array of booleans, one for each txg in TXG_OFF and removes the hack. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #6864 |
||
|
Tom Caputi
|
d53bd7f524 |
Fix recovery import (-F) with encrypted pool
When performing zil_claim() at pool import time, it is important that encrypted datasets set os_next_write_raw before writing to the zil_header_t. This prevents the code from attempting to re-authenticate the objset_phys_t when it writes it out, which is unnecessary because the zil_header_t is not protected by either objset MAC and impossible since the keys aren't loaded yet. Unfortunately, one of the code paths did not set this flag, which causes failed ASSERTs during 'zpool import -F'. This patch corrects this issue. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #6864 Closes #6916 |
||
|
Prakash Surya
|
0735ecb334 |
OpenZFS 8997 - ztest assertion failure in zil_lwb_write_issue
PROBLEM
=======
When `dmu_tx_assign` is called from `zil_lwb_write_issue`, it's possible
for either `ERESTART` or `EIO` to be returned.
If `ERESTART` is returned, this will cause an assertion to fail directly
in `zil_lwb_write_issue`, where the code assumes the return value is
`EIO` if `dmu_tx_assign` returns a non-zero value. This can occur if the
SPA is suspended when `dmu_tx_assign` is called, and most often occurs
when running `zloop`.
If `EIO` is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, `zil_commit_waiter_timeout` contains the
following logic:
lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);
In this case, if `dmu_tx_assign` returned `EIO` from within
`zil_lwb_write_issue`, the `lwb` variable passed in will not be issued
to disk. Thus, it's `lwb_state` field will remain `LWB_STATE_OPENED` and
this assertion will fail. `zil_commit_waiter_timeout` assumes that after
it calls `zil_lwb_write_issue`, the `lwb` will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where `dmu_tx_assign` returns `EIO`.
SOLUTION
========
This change modifies the `dmu_tx_assign` function such that `txg_how` is
a bitmask, rather than of the `txg_how_t` enum type. Now, the previous
`TXG_WAITED` semantics can be used via `TXG_NOTHROTTLE`, along with
specifying either `TXG_NOWAIT` or `TXG_WAIT` semantics.
Previously, when `TXG_WAITED` was specified, `TXG_NOWAIT` semantics was
automatically invoked. This was not ideal when using `TXG_WAITED` within
`zil_lwb_write_issued`, leading the problem described above. Rather, we
want to achieve the semantics of `TXG_WAIT`, while also preventing the
`tx` from being penalized via the dirty delay throttling.
With this change, `zil_lwb_write_issued` can acheive the semtantics that
it requires by passing in the value `TXG_WAIT | TXG_NOTHROTTLE` to
`dmu_tx_assign`.
Further, consumers of `dmu_tx_assign` wishing to achieve the old
`TXG_WAITED` semantics can pass in the value `TXG_NOWAIT | TXG_NOTHROTTLE`.
Authored by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting Notes:
- Additionally updated `zfs_tmpfile` to use `TXG_NOTHROTTLE`
OpenZFS-issue: https://www.illumos.org/issues/8997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/19ea6cb0f9
Closes #7084
|
||
|
Prakash Surya
|
2fe61a7ecc |
OpenZFS 8909 - 8585 can cause a use-after-free kernel panic
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: John Kennedy <jwk404@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>
PROBLEM
=======
There's a race condition that exists if `zil_free_lwb` races with either
`zil_commit_waiter_timeout` and/or `zil_lwb_flush_vdevs_done`.
Here's an example panic due to this bug:
> ::status
debugging crash dump vmcore.0 (64-bit) from ip-10-110-205-40
operating system: 5.11 dlpx-5.2.2.0_2017-12-04-17-28-32b6ba51fb (i86pc)
image uuid: 4af0edfb-e58e-6ed8-cafc-d3e9167c7513
panic message:
BAD TRAP: type=e (#pf Page fault) rp=ffffff0010555970 addr=60 occurred in module "zfs" due to a NULL pointer dereference
dump content: kernel pages only
> $c
zio_shrink+0x12()
zil_lwb_write_issue+0x30d(ffffff03dcd15cc0, ffffff03e0730e20)
zil_commit_waiter_timeout+0xa2(ffffff03dcd15cc0, ffffff03d97ffcf8)
zil_commit_waiter+0xf3(ffffff03dcd15cc0, ffffff03d97ffcf8)
zil_commit+0x80(ffffff03dcd15cc0, 9a9)
zfs_write+0xc34(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
fop_write+0x5b(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
write+0x250(42, fffffd7ff4832000, 2000)
sys_syscall+0x177()
If there's an outstanding lwb that's in `zil_commit_waiter_timeout`
waiting to timeout, waiting on it's waiter's CV, we must be sure not to
call `zil_free_lwb`. If we end up calling `zil_free_lwb`, then that LWB
may be freed and can result in a use-after-free situation where the
stale lwb pointer stored in the `zil_commit_waiter_t` structure of the
thread waiting on the waiter's CV is used.
A similar situation can occur if an lwb is issued to disk, and thus in
the `LWB_STATE_ISSUED` state, and `zil_free_lwb` is called while the
disk is servicing that lwb. In this situation, the lwb will be freed by
`zil_free_lwb`, which will result in a use-after-free situation when the
lwb's zio completes, and `zil_lwb_flush_vdevs_done` is called.
This race condition is prevented in `zil_close` by calling `zil_commit`
before `zil_free_lwb` is called, which will ensure all outstanding (i.e.
all lwb's in the `LWB_STATE_OPEN` and/or `LWB_STATE_ISSUED` states)
reach the `LWB_STATE_DONE` state before the lwb's are freed
(`zil_commit` will not return untill all the lwb's are
`LWB_STATE_DONE`).
Further, this race condition is prevented in `zil_sync` by only calling
`zil_free_lwb` for lwb's that do not have their `lwb_buf` pointer set.
All lwb's not in the `LWB_STATE_DONE` state will have a non-null value
for this pointer; the pointer is only cleared in
`zil_lwb_flush_vdevs_done`, at which point the lwb's state will be
changed to `LWB_STATE_DONE`.
This race *is* present in `zil_suspend`, leading to this bug.
At first glance, it would appear as though this would not be true
because `zil_suspend` will call `zil_commit`, just like `zil_close`, but
the problem is that `zil_suspend` will set the zilog's `zl_suspend`
field prior to calling `zil_commit`. Further, in `zil_commit`, if
`zl_suspend` is set, `zil_commit` will take a special branch of logic
and use `txg_wait_synced` instead of performing the normal `zil_commit`
logic.
This call to `txg_wait_synced` might be good enough for the data to
reach disk safely before it returns, but it does not ensure that all
outstanding lwb's reach the `LWB_STATE_DONE` state before it returns.
This is because, if there's an lwb "stuck" in
`zil_commit_waiter_timeout`, waiting for it's lwb to timeout, it will
maintain a non-null value for it's `lwb_buf` field and thus `zil_sync`
will not free that lwb. Thus, even though the lwb's data is already on
disk, the lwb will be left lingering, waiting on the CV, and will
eventually timeout and be issued to disk even though the write is
unnecessary.
So, after `zil_commit` is called from `zil_suspend`, we incorrectly
assume that there are not outstanding lwb's, and proceed to free all
lwb's found on the zilog's lwb list. As a result, we free the lwb that
will later be used `zil_commit_waiter_timeout`.
SOLUTION
========
The solution to this, is to ensure all outstanding lwb's complete before
calling `zil_free_lwb` via `zil_destroy` in `zil_suspend`. This patch
accomplishes this goal by forcing the normal `zil_commit` logic when
called from `zil_sync`.
Now, `zil_suspend` will call `zil_commit_impl` which will always use the
normal logic of waiting/issuing lwb's to disk before it returns. As a
result, any lwb's outstanding when `zil_commit_impl` is called will be
guaranteed to reach the `LWB_STATE_DONE` state by the time it returns.
Further, no new lwb's will be created via `zil_commit` since the zilog's
`zl_suspend` flag will be set. This will force all new callers of
`zil_commit` to use `txg_wait_synced` instead of creating and issuing
new lwb's.
Thus, all lwb's left on the zilog's lwb list when `zil_destroy` is
called will be in the `LWB_STATE_DONE` state, and we'll avoid this race
condition.
OpenZFS-issue: https://www.illumos.org/issues/8909
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ece62b6f8d
Closes #6940
|
||
|
Prakash Surya
|
1b2b0acab5 |
OpenZFS 8603 - rename zilog's "zl_writer_lock" to "zl_issuer_lock"
This is a purely cosmetic change. The zilog's "zl_writer_lock" field is being renamed to "zl_issuer_lock" to try and make the code easier to understand; no other changes are made. Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: C Fraire <cfraire@me.com> Approved by: Dan McDonald <danmcd@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8603 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2daf06546b Closes #6927 |
||
|
Prakash Surya
|
1ce23dcaff |
OpenZFS 8585 - improve batching done in zil_commit()
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>
Problem
=======
The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:
1. When there's outstanding ZIL blocks being written (i.e. there's
already a "writer thread" in progress), then any new calls to
zil_commit() will block waiting for the currently oustanding ZIL
blocks to complete. The blocks written for each "writer thread" is
coined a "batch", and there can only ever be a single "batch" being
written at a time. When a batch is being written, any new ZIL
transactions will have to wait for the next batch to be written,
which won't occur until the current batch finishes.
As a result, the underlying storage may not be used as efficiently
as possible. While "new" threads enter zil_commit() and are blocked
waiting for the next batch, it's possible that the underlying
storage isn't fully utilized by the current batch of ZIL blocks. In
that case, it'd be better to allow these new threads to generate
(and issue) a new ZIL block, such that it could be serviced by the
underlying storage concurrently with the other ZIL blocks that are
being serviced.
2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
to complete, prior to zil_commit() returning. The size of any given
batch is proportional to the number of ZIL transaction in the queue
at the time that the batch starts processing the queue; which
doesn't occur until the previous batch completes. Thus, if there's a
lot of transactions in the queue, the batch could be composed of
many ZIL blocks, and each call to zil_commit() will have to wait for
all of these writes to complete (even if the thread calling
zil_commit() only cared about one of the transactions in the batch).
To further complicate the situation, these two issues result in the
following side effect:
3. If a given batch takes longer to complete than normal, this results
in larger batch sizes, which then take longer to complete and
further drive up the latency of zil_commit(). This can occur for a
number of reasons, including (but not limited to): transient changes
in the workload, and storage latency irregularites.
Solution
========
The solution attempted by this change has the following goals:
1. no on-disk changes; maintain current on-disk format.
2. modify the "batch size" to be equal to the "ZIL block size".
3. allow new batches to be generated and issued to disk, while there's
already batches being serviced by the disk.
4. allow zil_commit() to wait for as few ZIL blocks as possible.
5. use as few ZIL blocks as possible, for the same amount of ZIL
transactions, without introducing significant latency to any
individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks.
In theory, with these goals met, the new allgorithm will allow the
following improvements:
1. new ZIL blocks can be generated and issued, while there's already
oustanding ZIL blocks being serviced by the storage.
2. the latency of zil_commit() should be proportional to the underlying
storage latency, rather than the incoming synchronous workload.
Porting Notes
=============
Due to the changes made in commit
|
||
|
Brian Behlendorf
|
72841b9fd9
|
Preserve itx alloc size for zio_data_buf_free()
Using zio_data_buf_alloc() to allocate the itx's may be unsafe because the itx->itx_lr.lrc_reclen field is not constant from allocation to free. Using a different itx->itx_lr.lrc_reclen size in zio_data_buf_free() can result in the allocation being returned to the wrong kmem cache. This issue can be avoided entirely by storing the allocation size in itx->itx_size and using that for zio_data_buf_free(). Reviewed by: Prakash Surya <prakash.surya@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6912 |
||
|
Don Brady
|
1c27024e22 |
Undo c89 workarounds to match with upstream
With PR 5756 the zfs module now supports c99 and the remaining past c89 workarounds can be undone. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Don Brady <don.brady@delphix.com> Closes #6816 |
||
|
Brian Behlendorf
|
867959b588
|
OpenZFS 8081 - Compiler warnings in zdb
Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787 |
||
|
Brian Behlendorf
|
a032ac4b38 |
OpenZFS 8558, 8602 - lwp_create() returns EAGAIN
8558 lwp_create() returns EAGAIN on system with more than 80K ZFS filesystems On a system with more than 80K ZFS filesystems, we've seen cases where lwp_create() will start to fail by returning EAGAIN. The problem being, for each of those 80K ZFS filesystems, a taskq will be created for each dataset as part of the ZIL for each dataset. Porting Notes: - The new nomem taskq kstat was dropped. - Added module options and documentation for new tunings zfs_zil_clean_taskq_nthr_pct, zfs_zil_clean_taskq_minalloc, zfs_zil_clean_taskq_maxalloc, and zfs_sync_taskq_batch_pct. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Chris Dunlop <chris@onthe.net.au> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8558 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/216d772 8602 remove unused "dp_early_sync_tasks" field from "dsl_pool" structure Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Authored by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Chris Dunlop <chris@onthe.net.au> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8602 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2bcb545 Closes #6779 |
||
|
Tom Caputi
|
4807c0badb |
Encryption patch follow-up
* PBKDF2 implementation changed to OpenSSL implementation. * HKDF implementation moved to its own file and tests added to ensure correctness. * Removed libzfs's now unnecessary dependency on libzpool and libicp. * Ztest can now create and test encrypted datasets. This is currently disabled until issue #6526 is resolved, but otherwise functions as advertised. * Several small bug fixes discovered after enabling ztest to run on encrypted datasets. * Fixed coverity defects added by the encryption patch. * Updated man pages for encrypted send / receive behavior. * Fixed a bug where encrypted datasets could receive DRR_WRITE_EMBEDDED records. * Minor code cleanups / consolidation. Signed-off-by: Tom Caputi <tcaputi@datto.com> |
||
|
Tom Caputi
|
b525630342 |
Native Encryption for ZFS on Linux
This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769 |
||
|
Andriy Gapon
|
e98b611725 |
OpenZFS 8373 - TXG_WAIT in ZIL commit path
Authored by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Dan McDonald <danmcd@joyent.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8373 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7f04961 Closes #6403 |
||
|
Giuseppe Di Natale
|
1b7c1e5ce9 |
OpenZFS 7578 - Fix/improve some aspects of ZIL writing
- After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <mav@FreeBSD.org> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk> Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Yao <ryao@gentoo.org> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191 |
||
|
Matthew Ahrens
|
4747a7d3d4 |
OpenZFS 8063 - verify that we do not attempt to access inactive txg
Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru> A standard practice in ZFS is to keep track of "per-txg" state. Any of the 3 active TXG's (open, quiescing, syncing) can have different values for this state. We should assert that we do not attempt to modify other (inactive) TXG's. Porting Notes: - ASSERTV added to txg_sync_waiting() for unused variable. OpenZFS-issue: https://www.illumos.org/issues/8063 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01acb46 Closes #6109 |
||
|
George Wilson
|
55922e73b4 |
OpenZFS 3821 - Race in rollback, zil close, and zil flush
Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Andriy Gapon <avg@FreeBSD.org> Approved by: Richard Lowe <richlowe@richlowe.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru> OpenZFS-issue: https://www.illumos.org/issues/3821 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/43297f9 Closes #5905 |
||
|
ka7
|
4e33ba4c38 |
Fix spelling
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se> Closes #5547 Closes #5543 |
||
|
Brian Behlendorf
|
02730c333c |
Use cstyle -cpP in make cstyle check
Enable picky cstyle checks and resolve the new warnings. The vast
majority of the changes needed were to handle minor issues with
whitespace formatting. This patch contains no functional changes.
Non-whitespace changes are as follows:
* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5465
|
||
|
David Quigley
|
a6255b7fce | DLPX-44812 integrate EP-220 large memory scalability | ||
|
George Wilson
|
d3c2ae1c08 |
OpenZFS 6950 - ARC should cache compressed data
Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078 |
||
|
Gvozden Neskovic
|
ee36c709c3 |
Performance optimization of AVL tree comparator functions
perf: 2.75x faster ddt_entry_compare()
First 256bits of ddt_key_t is a block checksum, which are expected
to be close to random data. Hence, on average, comparison only needs to
look at first few bytes of the keys. To reduce number of conditional
jump instructions, the result is computed as: sign(memcmp(k1, k2)).
Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} ,
which is computed efficiently. Synthetic performance evaluation of
original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R)
CPU E5-2660 v3:
old 6.85789 s
new 2.49089 s
perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare()
Compute the result directly instead of using conditionals
perf: zfs_range_compare()
Speedup between 1.1x - 2.5x, depending on compiler version and
optimization level.
perf: spa_error_entry_compare()
`bcmp()` is not suitable for comparator use. Use `memcmp()` instead.
perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare()
perf: 2.8x faster zil_bp_compare()
perf: 2.8x faster mze_compare()
perf: faster dbuf_compare()
perf: faster compares in spa_misc
perf: 2.8x faster layout_hash_compare()
perf: 2.8x faster space_reftree_compare()
perf: libzfs: faster avl tree comparators
perf: guid_compare()
perf: dsl_deadlist_compare()
perf: perm_set_compare()
perf: 2x faster range_tree_seg_compare()
perf: faster unique_compare()
perf: faster vdev_cache _compare()
perf: faster vdev_uberblock_compare()
perf: faster fuid _compare()
perf: faster zfs_znode_hold_compare()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Richard Elling <richard.elling@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5033
|
||
|
Igor Kozhukhov
|
eca7b76001 |
OpenZFS 6314 - buffer overflow in dsl_dataset_name
Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6314 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d6160ee |
||
|
Ned Bass
|
50c957f702 |
Implement large_dnode pool feature
Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542 |
||
|
Brian Behlendorf
|
1229323d5f |
Align thread priority with Linux defaults
Under Linux filesystem threads responsible for handling I/O are
normally created with the maximum priority. Non-I/O filesystem
processes run with the default priority. ZFS should adopt the
same priority scheme under Linux to maintain good performance
and so that it will complete fairly when other Linux filesystems
are active. The priorities have been updated to the following:
$ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta'
- TS 10743 19 -20 [spl_kmem_cache]
- TS 10744 19 -20 [spl_system_task]
- TS 10745 19 -20 [spl_dynamic_tas]
- TS 10764 19 0 [dbu_evict]
- TS 10765 19 0 [arc_prune]
- TS 10766 19 0 [arc_reclaim]
- TS 10767 19 0 [arc_user_evicts]
- TS 10768 19 0 [l2arc_feed]
- TS 10769 39 0 [z_unmount]
- TS 10770 39 -20 [zvol]
- TS 11011 39 -20 [z_null_iss]
- TS 11012 39 -20 [z_null_int]
- TS 11013 39 -20 [z_rd_iss]
- TS 11014 39 -20 [z_rd_int_0]
- TS 11022 38 -19 [z_wr_iss]
- TS 11023 39 -20 [z_wr_iss_h]
- TS 11024 39 -20 [z_wr_int_0]
- TS 11032 39 -20 [z_wr_int_h]
- TS 11033 39 -20 [z_fr_iss_0]
- TS 11041 39 -20 [z_fr_int]
- TS 11042 39 -20 [z_cl_iss]
- TS 11043 39 -20 [z_cl_int]
- TS 11044 39 -20 [z_ioctl_iss]
- TS 11045 39 -20 [z_ioctl_int]
- TS 11046 39 -20 [metaslab_group_]
- TS 11050 19 0 [z_iput]
- TS 11121 38 -19 [z_wr_iss]
Note that under Linux the meaning of a processes priority is inverted
with respect to illumos. High values on Linux indicate a _low_ priority
while high value on illumos indicate a _high_ priority.
In order to preserve the logical meaning of the minclsyspri and
maxclsyspri macros when they are used by the illumos wrapper functions
their values have been inverted. This way when changes are merged
from upstream illumos we won't need to remember to invert the macro.
It could also lead to confusion.
This patch depends on https://github.com/zfsonlinux/spl/pull/466.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #3607
|
||
|
George Wilson
|
2a4324141f |
Illumos 5369 - arc flags should be an enum
5369 arc flags should be an enum 5370 consistent arc_buf_hdr_t naming scheme Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Alex Reece <alex.reece@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Richard Lowe <richlowe@richlowe.net> Porting notes: ZoL has moved some ARC definitions into arc_impl.h. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: Tim Chase <tim@chase2k.com> |
||
|
Arne Jansen
|
9c43027b3f |
Illumos 5269 - zpool import slow
5269 zpool import slow Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george@delphix.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5269 https://github.com/illumos/illumos-gate/commit/12380e1e Ported-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3396 |
||
|
Matthew Ahrens
|
f1512ee61e |
Illumos 5027 - zfs large block support
5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354 |
||
|
Justin T. Gibbs
|
0c66c32d1d |
Illumos 5056 - ZFS deadlock on db_mtx and dn_holds
5056 ZFS deadlock on db_mtx and dn_holds Author: Justin Gibbs <justing@spectralogic.com> Reviewed by: Will Andrews <willa@spectralogic.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5056 https://github.com/illumos/illumos-gate/commit/bc9014e Porting Notes: sa_handle_get_from_db(): - the original patch includes an otherwise unmentioned fix for a possible usage of an uninitialised variable dmu_objset_open_impl(): - Under Illumos list_link_init() is the same as filling a list_node_t with NULLs, so they don't notice if they miss doing list_link_init() on a zero'd containing structure (e.g. allocated with kmem_zalloc as here). Under Linux, not so much: an uninitialised list_node_t goes "Boom!" some time later when it's used or destroyed. dmu_objset_evict_dbufs(): - reduce stack usage using kmem_alloc() Ported-by: Chris Dunlop <chris@onthe.net.au> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> |