Just making it easier to not get the locking and broadcast wrong.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
If the ZIL crashed, any outstanding LWBs are no longer interesting, so
if they return, we need to just clean them up and return, not try to do
any work on them. This is true even if they return success, as that may
be long after the pool suspended and resumed, depending on when/if the
kernel decides to return the IO to us. In particular, we must not try to
get the "next" LWB from zl_lwb_list, since they're no longer on that
list.
So, we put a flag on in-flight LWBs in zil_crash() when we move them
from zl_lwb_list to zl_lwb_crash_list, so we know what's going on when
they return.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
I'm soon about to need another LWB flag, and boolean_t is just so big
for only storing a single bit. Changing to a bitfield is far less
wasteful.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17622
This is trying to get all the uses and non-uses of SET_ERROR correct
(being: only call it if we're the originator of an error _within ZFS_),
and correctly negating errors going to/from the kernel. And/or both.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17605
The vast majority of calls to zil_commit() follow VFS ops, and should
honour the failmode= setting - either wait for sync, or return error.
Some calls however are part of a larger syncing op, and shouldn't ever
block if something goes wrong.
To allow this, we introduce zil_commit_flags(), with a flag
ZIL_COMMIT_FAILMODE to indicate whether or not the pool failmode should
be honoured. zil_commit() is now a wrapper that always sets this flag,
but any caller wanting a different behaviour can request ZIL_COMMIT_NOW
instead to have the call return failure if the pool suspends, regardless
of the failmode= setting.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
If the ZIL runs into trouble, it calls txg_wait_synced(), which blocks
on suspend. We want it to not block on suspend, instead returning an
error. On the surface, this is simple: change all calls to
txg_wait_synced_flags(TXG_WAIT_SUSPEND), and then thread the error
return back to the zil_commit() caller.
Handling suspension means returning an error to all commit waiters. This
is relatively straightforward, as zil_commit_waiter_t already has
zcw_zio_error to hold the write IO error, which signals a fallback to
txg_wait_synced_flags(TXG_WAIT_SUSPEND), which will fail, and so the
waiter can now return an error from zil_commit().
However, commit waiters are normally signalled when their associated
write (LWB) completes. If the pool has suspended, those IOs may not
return for some time, or maybe not at all. We still want to signal those
waiters so they can return from zil_commit(). We have a list of those
in-flight LWBs on zl_lwb_list, so we can run through those, detach them
and signal them. The LWB itself is still in-flight, but no longer has
attached waiters, so when it returns there will be nothing to do.
(As an aside, ITXs can also supply completion callbacks, which are
called when they are destroyed. These are directly connected to LWBs
though, so are passed the error code and destroyed there too).
At this point, all ZIL waiters have been ejected, so we only have to
consider the internal state. We potentially still have ITXs that have
not been committed, LWBs still open, and LWBs in-flight. The on-disk ZIL
is in an unknown state; some writes may have been written but not
returned to us. We really can't rely on any of it; the best thing to do
is abandon it entirely and start over when the pool returns to service.
But, since we may have IO out that won't return until the pool resumes,
we need something for it to return to.
The simplest solution I could find, implemented here, is to "crash" the
ZIL: accept no new ITXs, make no further updates, and let it empty out
on its normal schedule, that is, as txgs complete and zil_sync() and
zil_clean() are called. We set a "restart txg" to three txgs in the
future (syncing + TXG_CONCURRENT_STATES), at which point all the
internal state will have been cleared out, and the ZIL can resume
operation (handled at the top of zil_clean()).
This commit adds zil_crash(), which handles all of the above:
- sets the restart txg
- capture and signal all waiters
- zero the header
zil_crash() is called when txg_wait_synced_flags(TXG_WAIT_SUSPEND)
returns because the pool suspended (ESHUTDOWN).
The rest of the commit is just threading the errors through, and related
housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
ITX callbacks are used to signal that something can be cleaned up after
a itx is committed. Presently that's only used when syncing out mapped
pages (msync()) to mark dirty pages clean.
This extends the callback interface so it can be passed an error, and
take a different cleanup action if necessary.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
This changes zil_commit() to have an int return, and updates all callers
to check it. There are no corresponding internal changes yet; it will
always return 0.
Since zil_commit() is an indication that the caller _really_ wants the
associated data to be durability stored, I've annotated it with the
__warn_unused_result__ compiler attribute (via __must_check), to emit a
warning if it's ever ussd without doing something with the return code.
I hope this will mean we never misuse it in the future.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
dprintf() is a no-op in production builds, giving a compile warning. So,
refactor it a little to keep all the strings inside the function, and
then make the function a no-op when ZFS_DEBUG is not set.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Closes#17596
Casting unused returns to (void) is already of dubious value, but it's
entirely meaningless on functions that are defined as void return.
Remove the clutter.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Closes#17596
Based on previous commit this implements `zfs rewrite -P` flag,
making ZFS to keep blocks logical birth times while rewriting
files. It should exclude the rewritten blocks from incremental
sends, snapshot diffs, etc. Snapshots space usage same time will
reflect the additional space usage from newly allocated blocks.
Since this begins to use new "rewrite" flag in the block pointers,
this commit introduces a new read-compatible per-dataset feature
physical_rewrite. It must be enabled for the command to not fail,
it is activated on first use and deactivated on deletion of the
last affected dataset.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17565
During regular block writes ZFS sets both logical and physical
birth times equal to the current TXG. During dedup and block
cloning logical birth time is still set to the current TXG, but
physical may be copied from the original block that was used.
This represents the fact that logically user data has changed,
but the physically it is the same old block.
But block rewrite introduces a new situation, when block is not
changed logically, but stored in a different place of the pool.
From ARC, scrub and some other perspectives this is a new block,
but for example for user applications or incremental replication
it is not. Somewhat similar thing happen during remap phase of
device removal, but in that case space blocks are still acounted
as allocated at their logical birth times.
This patch introduces a new "rewrite" flag in the block pointer
structure, allowing to differentiate physical rewrite (when the
block is actually reallocated at the physical birth time) from
the device reval case (when the logical birth time is used).
The new functionality is not used at this point, and the only
expected change is that error log is now kept in terms of physical
physical birth times, rather than logical, since if a block with
logged error was somehow rewritten, then the previous error does
not matter any more.
This change also introduces a new TRAVERSE_LOGICAL flag to the
traverse code, allowing zfs send, redact and diff to work in
context of logical birth times, ignoring physical-only rewrites.
It also changes nothing at this point due to lack of those writes,
but they will come in a following patch.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17565
This feature enables tracking of when TXGs are committed to disk,
providing an estimated timestamp for each TXG.
With this information, it becomes possible to perform scrubs based
on specific date ranges, improving the granularity of data
management and recovery operations.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16853
All this machinery is there to try to understand when there an async
writeback waiting to complete because the intent log callbacks are still
outstanding, and force them with a timely zil_commit(). The next commit
fixes this properly, so there's no need for all this extra housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17587
Now zvol minors creation logic is passed thru spa_zvol_taskq, like it
is doing for remove/rename zvol minors functions. Appropriate
zvol minors creation functions are refactored:
- The zvol_create_minor()/zvol_minors_create_recursive() were removed.
- The single zvol_create_minors() is added instead.
Also, it become possible to collect zvol minors subtasks status, to
detect, if some zvol minor subtask is failed in the subtasks chain.
The appropriate message is reported to zfs_dbgmsg buffer in this case.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17575
Avoid calling dbuf_evict_one() from memory reclaim contexts (e.g. Linux
kswapd, FreeBSD pagedaemon). This prevents deadlock caused by reclaim
threads waiting for the dbuf hash lock in the call sequence:
dbuf_evict_one -> dbuf_destroy -> arc_buf_destroy
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Kaitlin Hoang <kthoang@amazon.com>
Closes#17561
Sponsored-by: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Igor Ostapenko <igor.ostapenko@klarasystems.com>
Closes#17581
During original block cloning implementation a mistake was made,
making BRT ZAP entries an array of 8 1-byte entries instead of 1
entry of 8 bytes. This makes the pools non-endian-safe.
This commit introduces a new read-compatible pool feature
"com.truenas:block_cloning_endian", fixing the endianness issue
for new pools while maintaining compatibility with existing ones.
The feature is automatically activated when creating the first BRT
ZAP (ensuring we don't activate it on pools that already have BRT
entries in the old format). When active, BRT entries are stored
as single 8-byte values.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17572
While booting, only the needed 256KiB benchmarks are done now.
The delay for checking all checksums occurs when requested via:
- Linux: cat /proc/spl/kstat/zfs/chksum_bench
- FreeBSD: sysctl kstat.zfs.misc.chksum_bench
Reported by: Lahiru Gunathilake <gunathilakebllg@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Co-authored-by: Colin Percival <cperciva@tarsnap.com>
Closes#17563Closes#17560
When we're passivating a metaslab group we start by passivating the
metaslabs that have been activated for each of the allocators. To do
that, we need to provide a weight. However, currently this erroneously
always uses a segment-based weight, even if segment-based weighting is
disabled.
Use the normal weight function, which will decide which type of weight
to use.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17566
Update the default FICLONE and FICLONERANGE ioctl behavior to wait
on dirty blocks. While this does remove some control from the
application, in practice ZFS is better positioned to the optimial
thing and immediately force a TXG sync.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17455
These are all cases where we initialise or update a variable, and then
never use it. None of them particularly matter, as the compiler should
optimise them all away during dead store elimination, but some static
analysers complain about them and they are extra work for casual readers
to follow, so worth removing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
It would have been optimised away anyway so it doesn't matter, but it
does make things a little tougher to read.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
They aren't used outside these very small blocks, and their initial
values are never used at all.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Linux kernel shrinker in the context of null/root memcg does not scan
dentry and inode caches added by a task running in non-root memcg. For
ZFS this means that dnode cache routinely overflows, evicting valuable
meta/data and putting additional memory pressure on the system.
This patch restores zfs_prune_aliases as fallback when the kernel
shrinker does nothing, enabling zfs to actually free dnodes. Moreover,
it (indirectly) calls arc_evict when dnode_size > dnode_limit.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17487Closes#17542
Before this change ZIL blocks were allocated only from normal or
SLOG vdevs. In typical situation when special vdevs are SSDs and
normal are HDDs it could cause weird inversions when data blocks
are written to SSDs, but ZIL referencing them to HDDs.
This change assumes that special vdevs typically have much better
(or at least not worse) latency than normal, and so in absence of
SLOGs should store ZIL blocks. It means similar to normal vdevs
introduction of special embedded log allocation class and updating
the allocation fallback order to: SLOG -> special embedded log ->
special -> normal embedded log -> normal.
The code tries to guess whether data block is going to be written
to normal or special vdev (it can not be done precisely before
compression) and prefer indirect writes for blocks written to a
special vdev to avoid double-write. For blocks that are going to
be written to normal vdev, special vdev by default plays as SLOG,
reducing write latency by the cost of higher special vdev wear,
but it is tunable via module parameter.
This should allow HDD pools with decent SSD as special vdev to
work under synchronous workloads without requiring additional
SLOG SSD, impractical in many scenarios.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17505
Under parallel workloads ZIL may delay writes of open LWBs that
are not full enough. On suspend we do not expect anything new to
appear since zil_get_commit_list() will not let it pass, only
returning TXG number to wait for. But I suspect that waiting for
the TXG commit without having the last LWB issued may not wait for
its completion, resulting in panic described in #17509.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17521
Currently, after a failed allocation, the metaslab code recalculates the
weight for a metaslab. However, for space-based metaslabs, it uses the
maximum free segment size instead of the normal weighting
algorithm. This is presumably because the normal metaslab weight is
(roughly) intended to estimate the size of the largest free segment, but
it doesn't do that reliably at most fragmentation levels. This means
that recalculated metaslabs are forced to a weight that isn't really
using the same units as the rest of them, resulting in undesirable
behaviors. We switch this to use the normal space-weighting function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Closes#17531
ZFS gang block headers are currently fixed at 512 bytes. This is
increasingly wasteful in the era of larger disk sector sizes. This PR
allows any size allocation to work as a gang header. It also contains
supporting changes to ZDB to make gang headers easier to work with.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17004
They only need a couple of fields, and passing the whole thing just
invites fiddling around inside it, like modifying flags, which then
makes it much harder to understand the zio state from inside zio.c.
We move the flag update to just after a successful throttle in zio.c.
Rename ZIO_FLAG_IO_ALLOCATING to ZIO_FLAG_ALLOC_THROTTLED
Better describes what it means, and makes it look less like
IO_IS_ALLOCATING, which means something different.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17508
We're not supposed to modify someone else's io_flags, so we need another
way to propagate DIO_CHKSUM_ERR.
If we squint, we can see that io_reexecute is really just recording
exceptional events that a parent (or its parents) will need to do
something about. It just happens that the only things we've had
historically are two forms of reexecution: now or later (suspend).
So, rename it to io_post, as in, post-IO info/events/actions. And now we
have a few spare bits for other conditions.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17507
special_small_blocks is applied to blocks after compression, so it
makes no sense to demand its values to be power of 2. At most
they could be multiple of 512, but that would still buy us nothing,
so lets allow them be any within SPA_MAXBLOCKSIZE.
Also special_small_blocks does not really need to depend on the
set recordsize, enabled pool features or presence of special vdev.
At worst in any of those cases it will just do nothing, so we
should not complicate users lives by artificial limitations.
While there, polish comments for recordsize and volblocksize.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17497
This allows to change the meaning of priority differences in FreeBSD
without requiring code changes in ZFS.
This upstreams commit fd141584cf89d7d2 from FreeBSD src.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17489
When an allocation is happening on a raidz vdev, the number of sectors
allocated is rounded up to a multiple of nparity + 1. If this results in
the allocation spilling into an extra row, then the corresponding call
to vdev_raidz_asize_to_psize will incorrectly assume that parity sectors
were allocated for that spilled row, even though no data is stored
there.
If we determine that happened, we need to subtract out those extra
sectors before performing the rest of the capacity calculation.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17490
Since 246e588, gang blocks written to raidz vdevs will write past the
end of their allocation, corrupting themselves, other data, or both.
The reason is simple - when allocating the gang children, we call
vdev_psize_to_asize() to find out how much data we should load into the
allocation we just did. vdev_raidz_asize_to_psize() had a bug; it
computed the psize, but returned the original asize. The raidz layer
dutifully writes that much out, into space beyond the end of the
allocation.
If there's existing data there, it gets overwritten, causing checksum
errors when that data is read. Even there's not data there (unlikely,
given that gang blocks are in play at all), that area is not considered
allocated, so can be allocated and overwritten later.
The fix is simple: return the psize we just computed.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17488
As discussed in the comments of PR #17004, you can theoretically run
into a case where a gang child has more copies than the gang header,
which can lead to some odd accounting behavior (and even trip a
VERIFY). While the accounting code could be changed to handle this, it
fundamentally doesn't seem to make a lot of sense to allow this to
happen. If the data is supposed to have a certain level of reliability,
that isn't actually achieved unless the gang_copies property is set to
match it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17484
There are three possible cases where dmu_tx_assign() may
encounter a fatal error. When there is a true lack of free
space (ENOSPC), when there is a lack of quota space (EDQUOT),
or when data required to perform the transaction cannot be
read from disk (EIO). See the dmu_tx_check_ioerr() function
for additional details of on the motivation for check for
I/O error early.
Prior to this change dmu_tx_assign() would return the
contents of tx->tx_err which covered a wide range of possible
error codes (EIO, ECKSUM, ESRCH, etc). In practice, none
of the callers could do anything useful with this level of
detail and simply returned the error.
Therefore, this change converts all tx->tx_err errors to EIO,
adds ASSERTs to dmu_tx_assign() to cover the only possible
errors, and clarifies the function comment to include EIO as
a possible fatal error.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian D Behlendorf <behlendo@slag12.llnl.gov>
Closes#17463
There are still a variety of bugs involving the vdev_nonrot property
that will cause problems if you try to run the test suite with
segment-based weighting disabled, and with other things in the weighting
code. Parents' nonrot property need to be updated when children are
added. When vdevs are expanded and more metaslabs are added, the weights
have to be recalculated (since the number of metaslabs is an input to
the lba bias function). When opening, faulted or unopenable children
should not be considered for whether a vdev is nonrot or not (since the
nonrot property is determined during a successful open, this can cause
false negatives). And draid spares need to have the nonrot property set
correctly.
Sponsored-by: Eshtek, creators of HexOS
Sponsored-by: Klara, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17469
ZIL introduced dependencies between its write ZIOs to permit flush
defer, when we flush vdev caches only once all the write ZIOs has
completed. But it was recently spotted that it serializes not only
ZIO completions handling, but also their ready stage. It means ZIO
pipeline can't calculate checksums for the following ZIOs until all
the previous are checksumed, even though it is not required. On a
systems where memory throughput of a single CPU core is limited,
it creates single-core CPU bottleneck, which is difficult to see
due to ZIO pipeline design with many taskqueue threads.
While it would be great to bypass the ready stage waits, it would
require changes to ZIO code, and I haven't found a clean way to do
it. But I've noticed that we don't need any dependency between
the write ZIOs if the previous one has some waiters, which means
it won't defer any flushes and work as a barrier for the earlier
ones.
Bypassing it won't help large single-thread writes, since all the
write ZIOs except the last in that case won't have waiters, and
so will be dependent. But in that case the ZIO processing might
not be a bottleneck, since there will be only one thread populating
the write buffers, that will likely be the bottleneck.
But bypassing the ZIO dependency on multi-threaded write workloads
really allows them to scale beyond the checksuming throughput of
one CPU core.
My tests with writing 12 files on a same dataset on a pool with
4 striped NVMes as SLOGs from 12 threads with 1MB blocks on a
system with Xeon Silver 4114 CPU show total throughput increase
from 4.3GB/s to 8.5GB/s, increasing the SLOGs busy from ~30% to
~70%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17458
If a write is split across mutliple itxs, we only want the callback on
the last one, otherwise it will be called for every itx associated with
this single write, which makes it very hard to know what to clean up.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
Previous dmu_tx_count_clone() was broken, stating that cloning is
similar to free. While they might be from some points, cloning
is not net-free. It will likely consume space and memory, and
unlike free it will do it no matter whether the destination has
the blocks or not (usually not, so previous code did nothing).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17431
Looking on txg_wait_synced(, 0) I've noticed that it always syncs
5 TXGs: 3 TXG_CONCURRENT_STATES + 2 TXG_DEFER_SIZE. But in case
of dmu_offset_next() we do not care about deferred frees. And even
concurrent TXGs we might not need sync all 3 if the dnode was not
dirtied in last few TXGs.
This patch makes dmu_offset_next() to sync one TXG at a time until
the dnode is clean, but no more than 3 TXG_CONCURRENT_STATES times.
My tests with random simultaneous writes and seeks over many files
on HDD pool show 7-14% performance increase.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17434
