3805 arc shouldn't cache freed blocks
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Elling <richard.elling@dey-sys.com>
Reviewed by: Will Andrews <will@firepipe.net>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
illumos/illumos-gate@6e6d5868f5https://www.illumos.org/issues/3805
ZFS should proactively evict freed blocks from the cache.
On dcenter, we saw that we were caching ~256GB of metadata, while the
pool only had <4GB of metadata on disk. We were wasting about half the
system's RAM (252GB) on blocks that have been freed.
Even though these freed blocks will never be used again, and thus will
eventually be evicted, this causes us to use memory inefficiently for 2
reasons:
1. A block that is freed has no chance of being accessed again, but will
be kept in memory preferentially to a block that was accessed before it
(and is thus older) but has not been freed and thus has at least some
chance of being accessed again.
2. We partition the ARC into several buckets:
user data that has been accessed only once (MRU)
metadata that has been accessed only once (MRU)
user data that has been accessed more than once (MFU)
metadata that has been accessed more than once (MFU)
The user data vs metadata split is somewhat arbitrary, and the primary
control on how much memory is used to cache data vs metadata is to
simply try to keep the proportion the same as it has been in the past
(each bucket "evicts against" itself). The secondary control is to
evict data before evicting metadata.
Because of this bucketing, we may end up with one bucket mostly
containing freed blocks that are very old, while another bucket has more
recently accessed, still-allocated blocks. Data in the useful bucket
(with still-allocated blocks) may be evicted in preference to data in
the useless bucket (with old, freed blocks).
On dcenter, we saw that the MFU metadata bucket was 230MB, while the MFU
data bucket was 27GB and the MRU metadata bucket was 256GB. However,
the vast majority of data in the MRU metadata bucket (256GB) was freed
blocks, and thus useless. Meanwhile, the MFU metadata bucket (230MB)
was constantly evicting useful blocks that will be soon needed.
The problem of cache segmentation is a larger problem that needs more
investigation. However, if we stop caching freed blocks, it should
reduce the impact of this more fundamental issue.
Ported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1503
The definition of zfs_vdev_holder casts VDEV_HOLDER into a function pointer
passing to linux kernel's block layer function blkdev_get_by_path.
However current VDEV_HOLDER is defined to be wider than 32 bits and the compiler
warns about potential overflows. Instead of specifying different values for 32-bit and
64-bit systems using ifdefs, choose the common factor 32-bit addresses.
Redefine VDEV_HOLDER to 0x2401de7("zholder") here.
Signed-off-by: Ying Zhu <casualfisher@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1520
3552 condensing one space map burns 3 seconds of CPU in spa_sync() thread
3564 spa_sync() spends 5-10% of its time in metaslab_sync() (when not condensing)
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
illumos/illumos-gate@16a4a80742https://www.illumos.org/issues/3552https://www.illumos.org/issues/3564
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1513
3006 VERIFY[S,U,P] and ASSERT[S,U,P] frequently check if first
argument is zero
Reviewed by Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by George Wilson <george.wilson@delphix.com>
Approved by Eric Schrock <eric.schrock@delphix.com>
References:
illumos/illumos-gate@fb09f5aad4https://illumos.org/issues/3006
Requires:
zfsonlinux/spl@1c6d149feb
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1509
The current zfs OpenRC script's dependencies cause OpenRC to attempt to
unmount ZFS filesystems at shutdown while things were still using them,
which would fail. This is a cosmetic issue, but it should still be
addressed. It probably does not affect systems where the rootfs is a
legacy filesystem, but any system with the rootfs on ZFS needs to run
the ZFS init script after the system is ready to shutdown filesystems.
OpenRC's shutdown process occurs in the reverse order of the startup
process. Therefore running the ZFS shutdown procedure after filesystems
are ready to be unmounted requires running the startup procedure before
fstab. This patch changes the dependencies of the script to expliclty
run before fstab at boot when the rootfs is ZFS and to run after fstab
at boot whenever the rootfs is not ZFS. This should cover most use
cases.
The only cases not covered well by this are systems with legacy
root filesystems where people want to configure fstab to mount a non-ZFS
filesystem off a zvol and possibly also systems whose pools are stored
on network block devices. The former requires that the ZFS script run
before fstab, which could cause ZFS datasets to mount too early and
appear under the fstab mount points. The latter requires that the ZFS
script run after networking starts, which precludes the ability to store
any system information on ZFS. An additional OpenRC script could be
written to handle non-root pools on network block devices, but that will
depend on user demand and developer time.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1479
* Modified kstat_update() to read arcstats from proc.
* Fix shebang.
* Added Makefile.am entries for arcstat.py
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1506
When calling mount(), care must be taken to avoid passing in flags
that are used only by the user space utilities. Otherwise we may
stomp on flags that are reserved for other purposes in the kernel.
In particular, openSUSE 12.3 kernels have added a new MS_RICHACL
super-block flag whose value conflicts with our MS_COMMENT flag. This
causes incorrect behavior such as the umask being ignored. The
MS_COMMENT flag essentially serves as a placeholder in the option_map
data structure of zfs_mount.c, but its value is never used. Therefore
we can avoid the conflict by defining it to 0.
The MS_USERS, MS_OWNER, and MS_GROUP flags also conflict with reserved
flags in the kernel. While this is not known to have caused any
problems, it is nevertheless incorrect. For the purposes of the
mount.zfs helper, the "users", "owner", and "group" options just serve
as hints to set additional implied options. Therefore we now define
their associated mount flags in terms of the options that they imply
rather than giving them unique values.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1457
Adds zpool split documentation to the zpool man page. I only documented
the options that I could get to work. While it is documented on some
sun blogs that devices can be specified for split, I was not able to get
that to work during my testing.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1456
When SA xattrs are enabled only fallback to checking the directory
xattrs when the name is not found as a SA xattr. Otherwise, the SA
error which should be returned to the caller is overwritten by the
directory xattr errors. Positive return values indicating success
will also be immediately returned.
In the case of #1437 the ERANGE error was being correctly returned
by zpl_xattr_get_sa() only to be overridden with ENOENT which was
returned by the subsequent unnessisary call to zpl_xattr_get_dir().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1437
As a part of scrub/resilver tuning zfs_scrub_limit fell out of use,
but the definition of the variable remained in place.
Moreover various guides still (misleadingly) mention it as a way
to influence resilver/scrub behavior.
This commit removes its finally.
Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1444
The assertions in ddt_phys_decref and ddt_sync_entry cast ddp->ddp_refcnt
from uint64_t to int64_t, with a reference count bigger than 2^63, e.g. the
reference count of zero blocks commonly available in spare files, we may
mistakenly hit these assertations, so drop the type conversions here.
Signed-off-by: Ying Zhu <casualfisher@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1436
The vn_rdwr() function performs I/O by calling the vfs_write() or
vfs_read() functions. These functions reside just below the system
call layer and the expectation is they have almost the entire 8k of
stack space to work with. In fact, certain layered configurations
such as ext+lvm+md+multipath require the majority of this stack to
avoid stack overflows.
To avoid this posibility the vn_rdwr() call in dump_bytes() has been
moved to the ZIO_TYPE_FREE, taskq. This ensures that all I/O will be
performed with the majority of the stack space available. This ends
up being very similiar to as if the I/O were issued via sys_write()
or sys_read().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1399Closes#1423
3581 spa_zio_taskq[ZIO_TYPE_FREE][ZIO_TASKQ_ISSUE]->tq_lock is piping hot
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Gordon Ross <gordon.ross@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
illumos/illumos-gate@ec94d32https://illumos.org/issues/3581
Notes for Linux port:
Earlier commit 08d08eb reduced contention on this taskq lock by simply
reducing the number of z_fr_iss threads from 100 to one-per-CPU. We
also optimized the taskq implementation in zfsonlinux/spl@3c6ed54.
These changes significantly improved unlink performance to acceptable
levels.
This patch further reduces time spent spinning on this lock by
randomly dispatching the work items over multiple independent task
queues. The Illumos ZFS developers stated that this lock contention
only arose after "3329 spa_sync() spends 10-20% of its time in
spa_free_sync_cb()" was landed. It's not clear if 3329 affects the
Linux port or not. I didn't see spa_free_sync_cb() show up in
oprofile sessions while unlinking large files, but I may just not
have used the right test case.
I tested unlinking a 1 TB of data with and without the patch and
didn't observe a meaningful difference in elapsed time. However,
oprofile showed that the percent time spent in taskq_thread() was
reduced from about 16% to about 5%. Aside from a possible slight
performance benefit this may be worth landing if only for the sake of
maintaining consistency with upstream.
Ported-by: Ned Bass <bass6@llnl.gov>
Closes#1327
3329 spa_sync() spends 10-20% of its time in spa_free_sync_cb()
3330 space_seg_t should have its own kmem_cache
3331 deferred frees should happen after sync_pass 1
3335 make SYNC_PASS_* constants tunable
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>
References:
illumos/illumos-gate@01f55e48fbhttps://www.illumos.org/issues/3329https://www.illumos.org/issues/3330https://www.illumos.org/issues/3331https://www.illumos.org/issues/3335
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man
page and help
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
illumos/illumos-gate@31d7e8fa33https://www.illumos.org/issues/3306https://www.illumos.org/issues/3321
The vdev_file.c implementation in this patch diverges significantly
from the upstream version. For consistenty with the vdev_disk.c
code the upstream version leverages the Illumos bio interfaces.
This makes sense for Illumos but not for ZoL for two reasons.
1) The vdev_disk.c code in ZoL has been rewritten to use the
Linux block device interfaces which differ significantly
from those in Illumos. Therefore, updating the vdev_file.c
to use the Illumos interfaces doesn't get you consistency
with vdev_disk.c.
2) Using the upstream patch as is would requiring implementing
compatibility code for those Solaris block device interfaces
in user and kernel space. That additional complexity could
lead to confusion and doesn't buy us anything.
For these reasons I've opted to simply move the existing vn_rdwr()
as is in to the taskq function. This has the advantage of being
low risk and easy to understand. Moving the vn_rdwr() function
in to its own taskq thread also neatly avoids the possibility of
a stack overflow.
Finally, because of the additional work which is being handled by
the free taskq the number of threads has been increased. The
thread count under Illumos defaults to 100 but was decreased to 2
in commit 08d08e due to contention. We increase it to 8 until
the contention can be address by porting Illumos #3581.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1354
The previous code was only waiting for the symver file. But the
postinst target of the DKMS script for SPL will not only create
the symvers file, but also the header spl_config.h.
If we are waiting in the configure script of ZFS for the SPL
symvers file, then we also need to wait for spl_config.h.
Otherwise the configure script will abort because the spl_config.h
is not yet available.
On top of that, the function ZFS_AC_SPL_MODULE_SYMVERS is moved
to the end of the function ZFS_AC_SPL to allow both checks share
the with-spl-timeout parameter.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1431
Recent changes have caused older versions of gcc to mistakenly
flag 'old_umask' in vn_open() as an unitialized variable. To
silence the warning initialize it.
kernel.c: In function 'vn_open':
kernel.c:525:6: error: 'old_umask' may be used uninitialized
in this function
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The zfs_fd must be opened before calling print_all_handlers() or
the ioctl() cannot be used to the zfs control device. This brings
the zinject code back in sync with the Illumos implementation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
NOTES: This patch has been reworked from the original in the
following ways to accomidate Linux ZFS implementation
*) Usage of the cyclic interface was replaced by the delayed taskq
interface. This avoids the need to implement new compatibility
code and allows us to rely on the existing taskq implementation.
*) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h
because declaring externs in source files as was done in the
original patch is just plain wrong.
*) Instead of panicing the system when the deadman triggers a
zevent describing the blocked vdev and the first pending I/O
is posted. If the panic behavior is desired Linux provides
other generic methods to panic the system when threads are
observed to hang.
*) For reference, to delay zios by 30 seconds for testing you can
use zinject as follows: 'zinject -d <vdev> -D30 <pool>'
References:
illumos/illumos-gate@283b84606bhttps://www.illumos.org/issues/3246
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1396
A deadlock was accidentally introduced by commit e95853a which
can occur when the system is under memory pressure. What happens
is that while the txg_quiesce thread is holding the tx->tx_cpu
locks it enters memory reclaim. In the context of this memory
reclaim it then issues synchronous I/O to a ZVOL swap device.
Because the txg_quiesce thread is holding the tx->tx_cpu locks
a new txg cannot be opened to handle the I/O. Deadlock.
The fix is straight forward. Move the memory allocation outside
the critical region where the tx->tx_cpu locks are held. And for
good measure change the offending allocation to KM_PUSHPAGE to
ensure it never attempts to issue I/O during reclaim.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1274
These are build products and should be ignored.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #1402
When the kmod packaging was introduced the ability to pass the
--enable-debug and --enable-dmu-tx options from configure all
the way through to `make rpm|deb` was accidenally lost. Update
ZFS_AC_RPM to explicitlu set RPM_DEFINE_COMMON with these
rpmbuild defines.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1402
Preserve the release field when creating Debian packages. The
--keep-version option was not used because it results in a failure
when the git '<commit>_<hash>' syntax is used for the release.
The '_' is a valid character for RPM packages but not for DEBs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #1402
Issue #928
When building a custom release in a git tree provide the ability
to prevent the release field from being overwritten by the
`git describe` output.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1402
There are a number of issues with the generic kmod RPM spec in its
current state:
- The "%{__id_u}" macro seems to not be available on some systems (e.g.
Debian squeeze). It appears it has been deprecated. Use "${__id} -u"
instead.
- The way the "--with-linux=" configure option is generated in the
non-RHEL/Fedora case is completely wrong with various newline and
escaping issues (also, $kernel_version is not available in the
generator context).
The second issue made the generator shell snippet (almost) silently
fail, which under specific circumstances can result in broken builds
against the wrong kernel sources.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1416
According to the getxattr(2) man page the ERANGE errno should be
returned when the size of the value buffer is to small to hold the
result. Prior to this patch the implementation would just truncate
the value to size bytes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1408
The zpl_readdir() function shouldn't be registered as part of
the zpl_file_operations table, it must only be part of the
zpl_dir_file_operations table. By removing this callback
the VFS will now correctly return ENOTDIR when calling
getdents() on a file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1404
Previous patches have allowed you to set an increased ashift to
avoid doing 512b IO with 4k sector devices. However, it was not
possible to set the ashift lower than the reported physical sector
size even when a smaller logical size was supported. In practice,
there are several cases where settong a lower ashift is useful:
* Most modern drives now correctly report their physical sector
size as 4k. This causes zfs to correctly default to using a 4k
sector size (ashift=12). However, for some usage models this
new default ashift value causes an unacceptable increase in
space usage. Filesystems with many small files may see the
total available space reduced to 30-40% which is unacceptable.
* When replacing a drive in an existing pool which was created
with ashift=9 a modern 4k sector drive cannot be used. The
'zpool replace' command will issue an error that the new drive
has an 'incompatible sector alignment'. However, by allowing
the ashift to be manual specified as smaller, non-optimal,
value the device may still be safely used.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1381Closes#1328
Issue #967
Issue #548
3422 zpool create/syseventd race yield non-importable pool
3425 first write to a new zvol can fail with EFBIG
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
illumos/illumos-gate@bda8819455https://www.illumos.org/issues/3422https://www.illumos.org/issues/3425
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1390
For the DKMS package to successfully build the kernel-devel
headers must be included along gcc, make, and perl. The ZFS
code never directly invokes perl but the kernel build system
depends on it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1380
The only remaining perl dependency is part of the ZFS_AC_META macro.
By eliminating this and replacing it with awk we can avoid the need
to pull in perl to rebuild the packages.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1380
Commit f6fb7651a0 introduced the idea
of working builds which work correctly. However, because the zfs-kmod
depends on a specific 'spl-devel-kmod = {version}-%{release}' package
and the release component is unique the dependency is never satisfied.
This requires line was introduced to ensure the correct version of the
spl is always used. In this context only the version number is required
so the release component has been dropped to satisfy the dependency.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Part of the automated testing involves building the source on Debian Lenny
which ships an ancient version of automake (1.10.1). Historically, this
has caused a non-fatal warning about AM_SILENT_RULES not being defined.
But when the autogen.sh script was updated to use autoreconf the warning
became fatal.
configure.ac:31: warning: macro `AM_SILENT_RULES' not found in library
autoreconf: running: /usr/bin/autoconf --force
configure.ac:34: error: possibly undefined macro: AM_SILENT_RULES
If this token and others are legitimate, please use m4_pattern_allow.
To resolve this build issue the call to AM_SILENT_RULES has been wrapped
by m4_ifdef(). This prevents the macro from being expanded on platforms
where it's undefined.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
-D and -I are preprocessor flags, so should preferably be in the
appropriate variable.
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Update manpage with more information about the ACL, guest access
and that samba needs to be able to authenticate user(s).
* Add information that 'net' can be used to modify the share after
ZFS sharing and that it will be undone with a 'zfs unshare'.
* Give an example on how to mount a SMB filesystem shared via ZFS.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1181
Issue #1170
Do basic sanity checks in smb_available() to verify that the 'net'
command and the usershare directory exists.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1124
The distribution specific init scripts where excluded from the
packaging when it was reworked. The intention is to replace
them with systemd equivilants. However, that work has not yet
been done and the init scripts are still useful so they have
been added back in to the packaging.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In order to ensure that yum-builddep pulls in all the build
requirements a generic ${kmodname}-devel-kmod provides line is
added. This allows a version of the development headers to be
included without requiring knowledge of the kernel version.
This is important because unlike rpmbuild which does correctly
expand the source rpm spec file, yum-builddep does not. Without
this generic provides line mock which relies on yum-builddep is
unable to automatically satisfy the dependency.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When building from an arbitrary commit in the git tree it's useful
for the resulting packages to be uniquely identifiable. Therefore,
the build system has been updated to detect if your compiling in
git tree.
If you are building in a git tree, and there are commits after the
last annotated tag. Then the <id>-<hash> component of 'git describe'
will be used to overwrite the 'Release:' field in the META file.
The only tricky part is that to ensure the 'make dist' tarball is
built using the correct release. A dist-hook was added to the top
level make file to rewrite the META file using the correct release.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Correct spelling mistakes in the AUTHORS and DISCLAIMER files, and
update the README.markdown file to credit Illumos and mention that
the ZPL is finished.
The README.markdown file is also the first impression for a handful
of new users that discover ZoL through a web search because it
doubles as the splash page for the Github repository. The build blurbs
are therefore removed because these people should be encouraged to
visit the regular home page before installing the product.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1366
The --with-linux and --with-linux-obj options must be specified
as part of the dkms build otherwise the package will be built
against the running kernel.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Support was added to dkms so build dependencies can be specified.
This allows us to ensure that the spl package will always be built
before the zfs package. Those patches have not yet been merged
upstream but they are available in the zfsonlinux/dkms repository.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
