Break out the range_tree, btree, and highbit64/lowbit64 code from kernel
space into shared kernel and userspace code. This is needed for the
updated `zpool status -vv` error byte range reporting that will be
coming in a future commit. That commit needs the range_tree code in
kernel and userspace.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#18133
When zpool create fails because a vdev cannot be opened (ENXIO),
the error falls through to zpool_standard_error() which reports
the generic 'one or more devices is currently unavailable'. This
is misleading when the real cause is a block size mismatch or
other device open failure.
Add an explicit ENXIO case in zpool_create()'s error handling to
provide a more descriptive message.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Christos Longros <chris.longros@gmail.com>
Closes#18184Closes#11087
As part of SPA_LOAD_IMPORT add an additional activity check to
detect simultaneous imports from different hosts. This check is
only required when the timing is such that there's no activity
for the the read-only tryimport check to detect. This extra
safety chceck operates as follows:
1. Repeats the following MMP check 10 times:
a. Write out an MMP uberblock with the best txg and a random
sequence id to all primary pool vdevs.
b. Verify a minimum number of good writes such that even if
the pool appears degraded on the remote host it will see
at least one of the updated MMP uberblocks.
c. Wait for the MMP interval this leaves a window for other
racing hosts to make similar modifications which can be
detected.
d. Call vdev_uberblock_load() to determine the best uberblock
to use, this should be the MMP uberblock just written.
e. Verify the txg and random sequeunce number match the MMP
uberblock written in 1a.
2. Restore the original MMP uberblocks. This allows the check
to be performed again if the pool fails to import for an
unrelated reason.
This change also includes some refactoring and minor improvements.
- Never try loading earlier txgs during import when the import
fails with EREMOTEIO or EINTER. These errors don't indicate
the txg is damaged but instead that its either in use on a
remote host or the import was interactively cancelled. No
rewind is also performed for EBADD which can result from a
stale trusted config when doing a verbatim import.
- Refactor the code for consistent logging of the multihost
activity check using spa_load_note() and console messages
indicating when the activity check was trigger and the result.
- Added MMP_*_MASK and MMP_SEQ_CLEAR() macros to allow easier
modification of the sequence number in an uberblock.
- Added ZFS_LOAD_INFO_DEBUG environment variable which can be
set to log to dump to stdout the spa_load_info nvlist returned
during import. This is used by the updated mmp test cases
to determine if an activity check was run and its result.
- Standardize the mmp messages similarly to make it easier to
find all the relevent mmp lines in the debug log.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18077
Add a read-only dataset property, snapshots_changed_nsecs, which
exposes the nanosecond resolution version of snapshots_changed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Wolfgang Hoschek <wolfgang.hoschek@mac.com>
Closes#17998Closes#18031
libzfs is the only user of libshare, and only internally, so there's no
particular reason to build it separately, nor to export its symbols. So,
pull it into libzfs proper, remove its "public" header, and hide its
symbols.
The bare minimum "public" API is just to count and enumerate the
supported share types. These are moved to libzfs.h with the other share
API.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#18072
A deadlock occurs when snapshot expiry tasks are cancelled while holding
locks. The snapshot expiry task (snapentry_expire) spawns an umount
process and waits for it to complete. Concurrently, ARC memory pressure
triggers arc_prune which calls zfs_exit_fs(), attempting to cancel the
expiry task while holding locks. The umount process spawned by the
expiry task blocks trying to acquire locks held by arc_prune, which is
blocked waiting for the expiry task to complete. This creates a circular
dependency: expiry task waits for umount, umount waits for arc_prune,
arc_prune waits for expiry task.
Fix by adding non-blocking cancellation support to taskq_cancel_id().
The zfs_exit_fs() path calls zfsctl_snapshot_unmount_delay() to
reschedule the unmount, which needs to cancel any existing expiry task.
It now uses non-blocking cancellation to avoid waiting while holding
locks, breaking the deadlock by returning immediately when the task is
already running.
The per-entry se_taskqid_lock has been removed, with all taskqid
operations now protected by the global zfs_snapshot_lock held as
WRITER. Additionally, an se_in_umount flag prevents recursive waits when
zfsctl_destroy() is called during unmount. The taskqid is now only
cleared by the caller on successful cancellation; running tasks clear
their own taskqid upon completion.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17941
They're basically the same thing; lets just carry one.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17948
Lets just use the AVL implementation we use everywhere else.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17934
In theory they should not have resulted in a change. In practice, the
way visibility is set up currently means that many of our convenience
libraries will "leak through" into the available symbols in our public
libraries.
In this commit, we're seeing all the new symbols in libspl through
libuutil, libzfs and libzfs_core. Importantly, none have been removed,
so consumers of these libraries will not notice.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17861
Only include the zfs headers where they're currently required to
compile. Unfortunately, including zfs_ioctl.h in user space pulls
in a bunch of internal zfs headers as a side effect. We'll need
to move these structures in to a new shared header to avoid this.
We should not need to add the LIBZPOOL_CPPFLAGS when building the
zed, zinject, zpool, libzfs, ior libzfs_core.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17861
Refresh all ABI files using the CI generated files to reflect
the library interfaces to be published for the 2.4 release.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17911
The ABI of libzfs and libzpool have breaking changes since the
last major release. Bump the SONAME for the upcoming 2.4 release
branch to libzfs7 and libzpool7.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17911
Detect container environments and set timeout to zero unless
ZFS_MODULE_TIMEOUT is already set. This avoids an unnecessary ten
second delay after running zfs/zpool commands in a container where
/dev/zfs is unavailable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Adi Gollamudi <adigollamudi@gmail.com>
Closes#15165Closes#17922
Introduce a new vdev property `VDEV_PROP_SLOW_IO_REPORTING` that
allows users to disable notifications for slow devices.
This prevents ZED and/or ZFSD from degrading the pool due to slow
I/O.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Closes 17477
Implement BRT (Block Reference Table) prefetch functionality similar
to existing DDT prefetch. This allows preloading BRT metadata into
ARC to improve performance for block cloning operations and frees
of earlier cloned blocks.
Make -t parameter optional. When omitted, prefetch all supported
metadata types (both DDT and BRT now).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17890
We have infinite loop and on certain condition, we exit this loop
and thread with pthread_exit(). But also after this loop,
we have a code to perform pthread_cleanup_pop() and return from the
thread.
The problem is that modern compilers are able to recognize that we
actually never get to the statements after loop and therefore
it is dead code there.
I think, instead of pthread_exit(), it is better to break out of loop
and let the last statements to work as intended. This is because
we do need to keep pthread_cleanup_pop() anyhow. Of course,
it is matter of taste if we want to use return or pthread_exit as very
last statement in this function.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#17900
The label 'kfdok' is only used with O_TMPFILE, we need to use
the same #ifdef around this label.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#17894
Do not warn about vdev ashifts being smaller then physical ashifts
in a pool status if the pool ashift property set and vdev ashift
satisfies it (bigger or equal), since user explicitly requested
this. The ashift of individual vdevs are still reported.
Do not warn about vdev ashifts in zpool import, since it doesn't
matter much, and we don't even report individual vdevs ashifts
there.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17830
In "all pools" mode, pool_iter_refresh() will call zpool_iter(), which
will call zpool_refresh_stats() before calling add_pool(). If we already
have the pool, this is a different handle, so we just release it and
return. Back in pool_iter_refresh(), we then call zpool_stats_refresh()
again for our handle on the same pool.
All together, this means we're doing two ZFS_IOC_POOL_STATS calls into
the kernel for every pool in the system. This isn't wrong, but it does
double the pressure on global locks.
Instead, we add a new function zpool_refresh_stats_from_handle() that
simply copies the pool config and state from one handle to another, and
use it to update our handle before we release it in add_pool(), so we
only have one call per pool per interval.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17807
A single slow responding disk can affect the overall read
performance of a raidz group. When a raidz child disk is
determined to be a persistent slow outlier, then have it
sit out during reads for a period of time. The raidz group
can use parity to reconstruct the data that was skipped.
Each time a slow disk is placed into a sit out period, its
`vdev_stat.vs_slow_ios count` is incremented and a zevent
class `ereport.fs.zfs.delay` is posted.
The length of the sit out period can be changed using the
`raid_read_sit_out_secs` module parameter. Setting it to
zero disables slow outlier detection.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Contributions-by: Don Brady <don.brady@klarasystems.com>
Contributions-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17227
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Based on previous commit this implements `zfs rewrite -P` flag,
making ZFS to keep blocks logical birth times while rewriting
files. It should exclude the rewritten blocks from incremental
sends, snapshot diffs, etc. Snapshots space usage same time will
reflect the additional space usage from newly allocated blocks.
Since this begins to use new "rewrite" flag in the block pointers,
this commit introduces a new read-compatible per-dataset feature
physical_rewrite. It must be enabled for the command to not fail,
it is activated on first use and deactivated on deletion of the
last affected dataset.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17565
This feature enables tracking of when TXGs are committed to disk,
providing an estimated timestamp for each TXG.
With this information, it becomes possible to perform scrubs based
on specific date ranges, improving the granularity of data
management and recovery operations.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16853
During original block cloning implementation a mistake was made,
making BRT ZAP entries an array of 8 1-byte entries instead of 1
entry of 8 bytes. This makes the pools non-endian-safe.
This commit introduces a new read-compatible pool feature
"com.truenas:block_cloning_endian", fixing the endianness issue
for new pools while maintaining compatibility with existing ones.
The feature is automatically activated when creating the first BRT
ZAP (ensuring we don't activate it on pools that already have BRT
entries in the old format). When active, BRT entries are stored
as single 8-byte values.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17572
Add support for the '-a | --all' option to perform trim,
scrub, and initialize operations on all pools.
Previously, specifying a pool name was mandatory for
these operations. With this enhancement, users can now
execute these operations across all pools at once,
without needing to manually iterate over each pool
from the command line.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#17524
These are all cases where we initialise or update a variable, and then
never use it. None of them particularly matter, as the compiler should
optimise them all away during dead store elimination, but some static
analysers complain about them and they are extra work for casual readers
to follow, so worth removing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
ZFS gang block headers are currently fixed at 512 bytes. This is
increasingly wasteful in the era of larger disk sector sizes. This PR
allows any size allocation to work as a gang header. It also contains
supporting changes to ZDB to make gang headers easier to work with.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17004
Adds a featureflag that is not enabled during upgrades unless listed
explicitly. This is useful for features that could cause issues unless
applied carefully; for example, a feature that could make a root pool
unbootable if bootloaders don't yet have support for it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17004
special_small_blocks is applied to blocks after compression, so it
makes no sense to demand its values to be power of 2. At most
they could be multiple of 512, but that would still buy us nothing,
so lets allow them be any within SPA_MAXBLOCKSIZE.
Also special_small_blocks does not really need to depend on the
set recordsize, enabled pool features or presence of special vdev.
At worst in any of those cases it will just do nothing, so we
should not complicate users lives by artificial limitations.
While there, polish comments for recordsize and volblocksize.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17497
Usually the IO type can be inferred from the other fields (in
particular, priority and flags) sometimes it's not easy to see. This is
just another little debug helper.
May 27 2025 00:54:54.024110493 ereport.fs.zfs.data
class = "ereport.fs.zfs.data"
ena = 0x1f5ecfae600801
...
zio_delta = 0x0
zio_type = 0x2 [WRITE]
zio_priority = 0x3 [ASYNC_WRITE]
zio_objset = 0x0
Document zio_type and zio_priority.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17381
2aa3fbe761 extended zinject_record_t, and in doing so inadvertently
extended zfs_cmd_t, which broke compatibility with userspace tools
without the change.
This fixes that by using some of the unused space in zfs_cmd_t for the
extra fields. We also add an assert to trigger a compile error if the
size ever changes.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17367
In truenas_pylibzfs, we query list of encrypted datasets several times,
which is expensive. This commit exposes a public API zfs_is_encrypted()
to get encryption status from fast stat path without having to refresh
the properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17368
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17344
Currently, commands that resume a scrub/errorscrub from a paused state
don't get logged in the pool history. This is because resumes actually
return ECANCELED, instead of 0. This causes the tsd code in the common
ioctl logic to not think the ioctl succeeded, which causes the
log_history ioctl to fail with EPERM. However, for resuming a scrub from
a paused state, ECANCELED is success.
There are two options for how to deal with this. The first is the one
that I implemented here; I can't find a good reason for dmu_scan to
return ECANCELED on resume instead of 0, so let's just not. The only
place we check for the ECANCELED value is in zpool_scan, where we just
convert it back to zero. However, I am aware that this is changing an
ioctl interface, which I believe is a breaking change. I don't think
it's an important change, but maybe there is someone who relies on it.
The other option that could be implemented is to either allow ECANCELED
specifically from dsl_scan in the common ioctl code, or add a generic
facility to the common ioctl code that allows each command to specify
whether or not success happened, regardless of the return values. I am
open to feedback on which option people think would be better.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17301
When forced to resort to ganging, ZFS currently allocates three child
blocks, each one third of the size of the original. This is true
regardless of whether larger allocations could be made, which would
allow us to have fewer gang leaves. This improves performance when
fragmentation is high enough to require ganging, but not so high that
all the free ranges are only just big enough to hold a third of the
recordsize. This is also useful for improving the behavior of a future
change to allow larger gang headers.
We add the ability for the allocation codepath to allocate a range of
sizes instead of a single fixed size. We then use this to pre-allocate
the DVAs for the gang children. If those allocations fail, we fall back
to the normal write path, which will likely re-gang.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When multiple snapshots prevent the destruction/rollback of the
respective dataset/snapshot/volume via zfs destroy or zfs rollback,
the error message does not list the blocking snapshots sorted
according to their order of creation. This causes inconvenience and can
lead to confusion, and also creates a contrast with a returned message
from zfs list -t snap function.
Closes: #12751
Signed-off-by: Artem-OSSRevival <artem.vlasenko@ossrevival.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Add nvlist_snprintf() to print a nvlist to a buffer. This is basically
the snprintf() version of dump_nvlist(). Along with that, add a
zfs_dbgmsg_nvlist() to print out an nvlist to dbgmsg. This will aid in
debugging.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17215
Various tools will display draid vdev names with parameters embedded in
them, but would not accept them as valid vdev names when looking them
up, making it difficult to build pipelines involving draid vdevs.
This commit makes it so that if a full draid name is offered for match,
it gets truncated at the first ':' character.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update zfs userspace, groupspace, and projectspace to display the
default quotas when no per-ID specific quota is configured. This
ensures tool outputs align with enforced limits.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
For zfs_rename, after the dataset name is successfully updated,
the dataset handle that was passed to zfs_rename, still contains
the old name, due to which, the dataset handle becomes invalid.
The following operations performed using this handle result in
error since the dataset with old name cannot be found anymore.
changelist_rename does update the names in dataset handles,
but those are temporary handles that were created during
changelist_gather. The original handle that was used to call
zfs_rename is not updated.
We should update the name in original ZFS handle after the IOCTL
for rename returns success for the operation.
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
recv_fix_encryption_hierarchy() in its present state goes through all
stream filesystems, and for each one traverses the snapshots in order to
find one that exists locally. This happens by calling guid_to_name() for
each snapshot, which iterates through all children of the filesystem.
This results in CPU utilization of 100% for several minutes (for ~1000
filesystems on a Ryzen 4350G) for 1 thread at the end of a raw receive
(-w, regardless whether encrypted or not, dryrun or not).
Fix this by following a different logic: using the top_fs name, call
gather_nvlist() to gather the nvlists for all local filesystems. For
each one filesystem, go through the snapshots to find the corresponding
stream's filesystem (since we know the snapshots guid and can search
with it in stream_avl for the stream's fs). Then go on to fix the
encryption roots and locations as in its present state.
Avoiding guid_to_name() iteratively makes
recv_fix_encryption_hierarchy() significantly faster (from several
minutes to seconds for ~1000 filesystems on a Ryzen 4350G).
Another problem is the following: in case we have promoted a clone of
the filesystem outside the top filesystem specified in zfs send, zfs
receive does not fail but returns an error:
recv_incremental_replication() fails to find its origin and errors out
with needagain=1. This results in recv_fix_hierarchy() not being called
which may render some children of the top fs not mountable since their
encryption root was not updated. To circumvent this make
recv_incremental_replication() silently ignore this error.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#16929
