The PVS Studio 2016 FreeBSD kernel report stated:
\contrib\opensolaris\uts\common\fs\zfs\spa.c (1341): error V595: The 'spa->spa_spares.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1341, 1342.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1355): error V595: The 'spa->spa_l2cache.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1355, 1357.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1398): error V595: The 'spa->spa_spares.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1398, 1408.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1583): error V595: The 'oldvdevs' pointer was utilized before it was verified against nullptr. Check lines: 1583, 1595.
In practice, all of these uses were safe because a NULL pointer
implied a 0 vdev count, which kept us from iterating over vdevs.
However, rearranging the code to check the pointer first is not a
terrible micro-optimization and makes it more readable, so let us
do that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14456
`dsl_dir_activity_in_progress()` can call `zfs_get_temporary_prop()` with
the forth value set to NULL, which will pass NULL to `strcpy()` when
there is a match
Clang's static analyzer caught this with the help of CodeChecker for
Cross Translation Unit analysis.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14456
Encrypted blocks can not have 3 DVAs, because they use the space of the
3rd DVA for the IV+salt. zio_write_gang_block() takes this into
account, setting `gbh_copies` to no more than 2 in this case. Gang
members BP's do not have the X (encrypted) bit set (nor do they have the
DMU level and type fields set), because encryption is not handled at
this level. The gang block is reassembled, and then encryption (and
compression) are handled.
To check if this gang block is encrypted, the code in
zio_write_gang_block() checks `pio->io_bp`. This is normally fine,
because the block that's being ganged is typically the encrypted BP.
The problem is that if there is "recursive ganging", where a gang member
is itself a gang block, then when zio_write_gang_block() is called to
create a gang block for a gang member, `pio->io_bp` is the gang member's
BP, which doesn't have the X bit set, so the number of DVA's is not
restricted to 2. It should instead be looking at the the "gang leader",
i.e. the top-level gang block, to determine how many DVA's can be used,
to avoid a "NDVA's inversion" (where a child has more DVA's than its
parent).
gang leader BP: X (encrypted) bit set, 2 DVA's, IV+salt in 3rd DVA's
space:
```
DVA[0]=<1:...:100400> DVA[1]=<0:...:100400> salt=... iv=...
[L0 ZFS plain file] fletcher4 uncompressed encrypted LE
gang unique double size=100000L/100000P birth=... fill=1 cksum=...
```
leader's GBH contains a BP with gang bit set and 3 DVA's:
```
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
contiguous unique double size=55600L/55600P birth=... fill=0 cksum=...
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
contiguous unique double size=55600L/55600P birth=... fill=0 cksum=...
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600> DVA[2]=<1:...:200>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
gang unique double size=55400L/55400P birth=... fill=0 cksum=...
```
On nondebug bits, having the 3rd DVA in the gang block works for the
most part, because it's true that all 3 DVA's are available in the gang
member BP (in the GBH). However, for accounting purposes, gang block
DVA's ASIZE include all the space allocated below them, i.e. the
512-byte gang block header (GBH) as well as the gang members below that.
We see that above where the gang leader BP is 1MB logical (and after
compression: 0x`100000P`), but the ASIZE of each DVA is 2 sectors (1KB)
more than 1MB (0x`100400`).
Since thre are 3 copies of a block below it, we increment the ATIME of
the 3rd DVA of the gang leader by the space used by the 3rd DVA of the
child (1 sector, in this case). But there isn't really a 3rd DVA of the
parent; the salt is stored in place of the 3rd DVA's ASIZE.
So when zio_write_gang_member_ready() increments the parent's BP's
`DVA[2]`'s ASIZE, it's actually incrementing the parent's salt. When we
later try to read the encrypted recursively-ganged block, the salt
doesn't match what we used to write it, so MAC verification fails and we
get an EIO.
```
zio_encrypt(): encrypted 515/2/0/403 salt: 25 25 bb 9d ad d6 cd 89
zio_decrypt(): decrypting 515/2/0/403 salt: 26 25 bb 9d ad d6 cd 89
```
This commit addresses the problem by not increasing the number of copies
of the GBH beyond 2 (even for non-encrypted blocks). This simplifies
the logic while maintaining the ability to traverse all metadata
(including gang blocks) even if one copy is lost. (Note that 3 copies
of the GBH will still be created if requested, e.g. for `copies=3` or
MOS blocks.) Additionally, the code that increments the parent's DVA's
ASIZE is made to check the parent DVA's NDVAS even on nondebug bits. So
if there's a similar bug in the future, it will cause a panic when
trying to write, rather than corrupting the parent BP and causing an
error when reading.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Caused-by: #14356Closes#14440Closes#14413
In https://github.com/openzfs/zfs/pull/14228 the FreeBSD
SECTION_STATIC was set to ".data" instead of ".rodata". This
commit just restores it back to .rodata.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#14460
The remaining changes needed to make the assembly files work
with macOS.
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#14451
We accidentally reused variable name "i" for inner and outer loops.
Reviewed-by: Rich Ercolani <Rincebrain@gmail.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Reno Reckling <e-github@wthack.de>
Closes#14452Closes#14445
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#14450
With the persistent error log feature we need to account for
spa_errlog_{scrub, last} containing mappings to other error log objects,
which need to be marked as in-use as well.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14442Closes#14434
zfs_setproctitle_init() is stubbed out on FreeBSD.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rob Wing <rob.fx907@gmail.com>
Closes#14441
Pull in d40f55cd950919d7eac951b122668e55e33e5202 from upstream
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#14439
The 'rootdelay' boot option currently pauses the boot for a specified
amount of time. The original intent was to ensure that slower
configurations would have ample time to enumerate the devices to make
importing the root pool successful. This, however, causes unnecessary
boot delay for environments like Azure which set this parameter by
default.
This commit changes the initramfs logic to pause until it can
successfully load the 'zfs' module. The timeout specified by
'rootdelay' now becomes the maximum amount of time that initramfs will
wait before failing the boot.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#14430
After commit 19d3961, progress reporting (-v) with replication flag
enabled does not report the progress on the console. This commit
fixes the issue by updating the logic to check for pa->progress
instead of pa_verbosity in send_progress_thread().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14448
When testing distributed rebuild performance with more capable
hardware it was observed than increasing the zfs_rebuild_vdev_limit
to 64M reduced the rebuild time by 17%. Beyond 64MB there was
some improvement (~2%) but it was not significant when weighed
against the increased memory usage. Memory usage is capped at 1/4
of arc_c_max.
Additionally, vr_bytes_inflight_max has been moved so it's updated
per-metaslab to allow the size to be adjust while a rebuild is
running.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14428
For HDD based pools the default zfs_scan_vdev_limit of 4M
per-vdev can significantly limit the maximum scrub performance.
Increasing the default to 16M can double the scrub speed from
80 MB/s per disk to 160 MB/s per disk.
This does increase the memory footprint during scrub/resilver
but given the performance win this is a reasonable trade off.
Memory usage is capped at 1/4 of arc_c_max. Note that number
of outstanding I/Os has not changed and is still limited by
zfs_vdev_scrub_max_active.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14428
During snapshot deletion ZFS may issue several reads for each deadlist
to merge them into next snapshot's or pool's bpobj. Number of the dead
lists increases with number of snapshots. On HDD pools it may take
significant time during which sync thread is blocked.
This patch introduces prescient prefetch of required blocks for up to
128 deadlists ahead. Tests show reduction of time required to delete
dataset with 720 snapshots with randomly overwritten file on wide HDD
pool from 75-85 to 22-28 seconds.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Issue #14276Closes#14402
When resilvering the estimated time remaining is calculated using
the average issue rate over the current pass. Where the current
pass starts when a scan was started, or restarted, if the pool
was exported/imported.
For dRAID pools in particular this can result in wildly optimistic
estimates since the issue rate will be very high while scanning
when non-degraded regions of the pool are scanned. Once repair
I/O starts being issued performance drops to a realistic number
but the estimated performance is still significantly skewed.
To address this we redefine a pass such that it starts after a
scanning phase completes so the issue rate is more reflective of
recent performance. Additionally, the zfs_scan_report_txgs
module option can be set to reset the pass statistics more often.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14410
Linux 6.2 changes the second argument of the set_acl operation to be a
"struct dentry *" rather than a "struct inode *". The inode* parameter
is still available as dentry->d_inode, so adjust the call to the _impl
function call to dereference and pass that pointer to it.
Also document that the get_acl -> get_inode_acl member name change from
commit 884a693 was an API change also introduced in Linux 6.2.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#14415
Despite all optimizations, tests on actual hardware show that FreeBSD
kernel can't sleep for less then ~2us. Similar tests on Linux show
~50us delay at least from nanosleep() (haven't tested inside kernel).
It means that on very fast log device ZIL may not be able to satisfy
zfs_commit_timeout_pct block commit timeout, increasing log latency
more than desired.
Handle that by introduction of zil_min_commit_timeout parameter,
specifying minimal timeout value where additional delays to aggregate
writes may be skipped. Also skip delays if the LWB is more than 7/8
full, that often happens if I/O sizes are constant and match one of
LWB sizes. Both things are applied only if there were no already
outstanding log blocks, that may indicate single-threaded workload,
that by definition can not benefit from the commit delays.
While there, add short time moving average to zl_last_lwb_latency to
make it more stable.
Tests of single-threaded 4KB writes to NVDIMM SLOG on FreeBSD show IOPS
increase by 9% instead of expected 5%. For zfs_commit_timeout_pct of
1 there IOPS increase by 5.5% instead of expected 1%.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14418
The .align directive used to align storage locations is
ambiguous. On some platforms and assemblers it takes a byte count,
on others the argument is interpreted as a shift value. The current
usage expects the first interpretation.
Replace it with the unambiguous .balign directive which always
expects a byte count, regardless of platform and assembler.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14422
The .size directive used by the SET_SIZE C macro uses the special
dot symbol to calculate the size of a function. The dot symbol
refers to the current address, so for the calculation to be
meaningful the SET_SIZE macro must be placed immediately after the
end of the function the size is calculated for.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#14422
If we receive a DRR_FREEOBJECTS as the first entry in an object range,
this might end up producing a hole if the freed objects were the
only existing objects in the block.
If the txg starts syncing before we've processed any following
DRR_OBJECT records, this leads to a possible race where the backing
arc_buf_t gets its psize set to 0 in the arc_write_ready() callback
while still being referenced from a dirty record in the open txg.
To prevent this, we insert a txg_wait_synced call if the first
record in the range was a DRR_FREEOBJECTS that actually
resulted in one or more freed objects.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Hedberg <david.hedberg@findity.com>
Sponsored by: Findity AB
Closes#11893Closes#14358
In the zstream code, Coverity reported:
"The argument could be controlled by an attacker, who could invoke the
function with arbitrary values (for example, a very high or negative
buffer size)."
It did not report this in the kernel. This is likely because the
userspace code stored this in an int before passing it into the
allocator, while the kernel code stored it in a uint32_t.
However, this did reveal a potentially real problem. On 32-bit systems
and systems with only 4GB of physical memory or less in general, it is
possible to pass a large enough value that the system will hang. Even
worse, on Linux systems, the kernel memory allocator is not able to
support allocations up to the maximum 4GB allocation size that this
allows.
This had already been limited in userspace to 64MB by
`ZFS_SENDRECV_MAX_NVLIST`, but we need a hard limit in the kernel to
protect systems. After some discussion, we settle on 256MB as a hard
upper limit. Attempting to receive a stream that requires more memory
than that will result in E2BIG being returned to user space.
Reported-by: Coverity (CID-1529836)
Reported-by: Coverity (CID-1529837)
Reported-by: Coverity (CID-1529838)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14285
Introduce four new vdev properties:
checksum_n
checksum_t
io_n
io_t
These properties can be used for configuring the thresholds of zed's
diagnosis engine and are interpeted as <N> events in T <seconds>.
When this property is set to a non-default value on a top-level vdev,
those thresholds will also apply to its leaf vdevs. This behavior can be
overridden by explicitly setting the property on the leaf vdev.
Note that, these properties do not persist across vdev replacement. For
this reason, it is advisable to set the property on the top-level vdev
instead of the leaf vdev.
The default values for zed's diagnosis engine (10 events, 600 seconds)
remains unchanged.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology LLC
Closes#13805
In 2016, the authors of PVS Studio ran it on the FreeBSD kernel, which
identified a number of bugs / cleanup opportunities in the FreeBSD ZFS kernel
code. A few of them persist to the present day:
https://reviews.freebsd.org/D5245
Note that the scan was done against
freebsd/freebsd-src@46763fd4ca.
In particular, we have the following in free_blocks():
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (174): error V547: Expression '__left >= __right' is always true. Unsigned type value is always >= 0.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (171): error V634: The priority of the '*' operation is higher than that of the '<<' operation. It's possible that parentheses should be used in the expression.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\dnode_sync.c (175): error V547: Expression '__left >= __right' is always true. Unsigned type value is always >= 0.
A couple of assertions accidentally typecast the arguments they check to
unsigned in such a way that the result is always true. Also, parentheses
are missing around `1<<epbs` in `(db->db_blkid * 1<<epbs)`. This works
out to be okay due to multiplication not caring what order of operations
we use, but it is better to fix it to be `(db->db_blkid << epbs)`.
A few of the function local variables probably never should have been
32-bit in the first place, so we make them 64-bit. We also replace the
existing assertions with additional assertions to ensure that 64-bit
unsigned arithmetic is safe.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14407
When zfs_file_read returns error, resid may be uninitialized.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#14404
If zfs_receive_one() gets back EINVAL, check for the more likely case,
embedded block pointers + encryption and return that error, before
falling back to the less likely case, a resumable stream when the
kernel has not been upgraded to support resume.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: rsync.net
Sponsored-by: Klara Inc.
Closes#14379
This is only ever used with unsigned data, so the type itself should be
unsigned. Also, PVS Studio's 2016 FreeBSD kernel report correctly
identified the following assertion as always being true, so we can drop
it:
ASSERT3U(dd->dd_space_towrite[i & TXG_MASK], >=, 0);
The reason it was always true is because it would do casts to give us
unsigned comparisons. This could have been fixed by switching to
`ASSERT3S()`, but upon inspection, it turned out that this variable
never should have been allowed to be signed in the first place.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14408
Use the saved property index instead of looking it up once per DSL
directory when traversing up towards the root.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes#14397
Reported-by: KMSAN
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: The FreeBSD Foundation
Closes#14397
In original code, zfs_znode_dmu_fini is called in zfs_rmnode without
zfs_znode_hold_enter. It seems to assume it's ok to do so when the znode
is unlinked. However this assumption is not correct, as zfs_zget can be
called by NFS through zpl_fh_to_dentry as pointed out by Christian in
https://github.com/openzfs/zfs/pull/12767, which could result in a
use-after-free bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#12767Closes#14364
It was changed in e99932f7de,
but without docs update.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#14400
Add new macro ASMABI used by Windows to change
calling API to "sysv_abi".
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes#14228
This allows parsing of zfs send progress by checking the process
title.
Doing so requires some changes to the send code in libzfs_sendrecv.c;
primarily these changes move some of the accounting around, to allow
for the code to be verbose as normal, or set the process title. Unlike
BSD, setproctitle() isn't standard in Linux; thus, borrowed it from
libbsd with slight modifications.
Authored-by: Sean Eric Fagan <sef@FreeBSD.org>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14376
I recently gained the ability to run Clang's static analyzer on the
linux kernel modules via a few hacks. This extended coverage to code
that was previously missed since Clang's static analyzer only looked at
code that we built in userspace. Running it against the Linux kernel
modules built from my local branch produced a total of 72 reports
against my local branch. Of those, 50 were reports of logic errors and
22 were reports of dead code. Since we already had cleaned up all of
the previous dead code reports, I felt it would be a good next step to
clean up these dead code reports. Clang did a further breakdown of the
dead code reports into:
Dead assignment 15
Dead increment 2
Dead nested assignment 5
The benefit of cleaning these up, especially in the case of dead nested
assignment, is that they can expose places where our error handling is
incorrect. A number of them were fairly straight forward. However
several were not:
In vdev_disk_physio_completion(), not only were we not using the return
value from the static function vdev_disk_dio_put(), but nothing used it,
so I changed it to return void and removed the existing (void) cast in
the other area where we call it in addition to no longer storing it to a
stack value.
In FSE_createDTable(), the function is dead code. Its helper function
FSE_freeDTable() is also dead code, as are the CPP definitions in
`module/zstd/include/zstd_compat_wrapper.h`. We just delete it all.
In zfs_zevent_wait(), we have an optimization opportunity. cv_wait_sig()
returns 0 if there are waiting signals and 1 if there are none. The
Linux SPL version literally returns `signal_pending(current) ? 0 : 1)`
and FreeBSD implements the same semantics, we can just do
`!cv_wait_sig()` in place of `signal_pending(current)` to avoid
unnecessarily calling it again.
zfs_setattr() on FreeBSD version did not have error handling issue
because the code was removed entirely from FreeBSD version. The error is
from updating the attribute directory's files. After some thought, I
decided to propapage errors on it to userspace.
In zfs_secpolicy_tmp_snapshot(), we ignore a lack of permission from the
first check in favor of checking three other permissions. I assume this
is intentional.
In zfs_create_fs(), the return value of zap_update() was not checked
despite setting an important version number. I see no backward
compatibility reason to permit failures, so we add an assertion to catch
failures. Interestingly, Linux is still using ASSERT(error == 0) from
OpenSolaris while FreeBSD has switched to the improved ASSERT0(error)
from illumos, although illumos has yet to adopt it here. ASSERT(error ==
0) was used on Linux while ASSERT0(error) was used on FreeBSD since the
entire file needs conversion and that should be the subject of
another patch.
dnode_move()'s issue was caused by us not having implemented
POINTER_IS_VALID() on Linux. We have a stub in
`include/os/linux/spl/sys/kmem_cache.h` for it, when it really should be
in `include/os/linux/spl/sys/kmem.h` to be consistent with
Illumos/OpenSolaris. FreeBSD put both `POINTER_IS_VALID()` and
`POINTER_INVALIDATE()` in `include/os/freebsd/spl/sys/kmem.h`, so we
copy what it did.
Whenever a report was in platform-specific code, I checked the FreeBSD
version to see if it also applied to FreeBSD, but it was only relevant a
few times.
Lastly, the patch that enabled Clang's static analyzer to be run on the
Linux kernel modules needs more work before it can be put into a PR. I
plan to do that in the future as part of the on-going static analysis
work that I am doing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14380
Update several flaky test cases in zts-report.py.in until they
can be made entirely reliable.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14392
Rather than reclaiming space before updating the packages do
it afterwards. This avoids issues with apt returning an
error due to missing files on the system.
This commit includes a revert for 6320b9e6.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14387
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes#14310
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes#14310
There is an external assembly declaration extension in GNU C that glibc
uses when building with ieee128 floating point support on ppc64le.
Marking that as volatile makes no sense, so the build breaks.
It does not make sense to only mark this as volatile on Linux, since if
do not want the compiler reordering things on Linux, we do not want the
compiler reordering things on any other platform, so we stop treating
Linux specially and just manually inline the CPP macro so that we can
eliminate it. This should fix the build on ppc64le.
Tested-by: @gyakovlev
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14308Closes#14384
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/null/badzero.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/semicolon.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/minmax.cocci
There was a third opportunity to use `MIN()`, but that was in
`FSE_minTableLog()` in `module/zstd/lib/compress/fse_compress.c`.
Upstream zstd has yet to make this change and I did not want to change
header includes just for MIN, or do a one off, so I left it alone.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
In zfs_zaccess_dataset_check(), we have the following subexpression:
(!IS_DEVVP(ZTOV(zp)) ||
(IS_DEVVP(ZTOV(zp)) && (v4_mode & WRITE_MASK_ATTRS)))
When !IS_DEVVP(ZTOV(zp)) is false, IS_DEVVP(ZTOV(zp)) is true under the
law of the excluded middle since we are not doing pseudoboolean alegbra.
Therefore doing:
(IS_DEVVP(ZTOV(zp)) && (v4_mode & WRITE_MASK_ATTRS))
Is unnecessary and we can just do:
(v4_mode & WRITE_MASK_ATTRS)
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/excluded_middle.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/flexible_array.cocci
However, unlike the cases where the GNU zero length array extension had
been used, coccicheck would not suggest patches for the older style
single member arrays. That was good because blindly changing them would
break size calculations in most cases.
Therefore, this required care to make sure that we did not break size
calculations. In the case of `indirect_split_t`, we use
`offsetof(indirect_split_t, is_child[is->is_children])` to calculate
size. This might be subtly wrong according to an old mailing list
thread:
https://inbox.sourceware.org/gcc-prs/20021226123454.27019.qmail@sources.redhat.com/T/
That is because the C99 specification should consider the flexible array
members to start at the end of a structure, but compilers prefer to put
padding at the end. A suggestion was made to allow compilers to allocate
padding after the VLA like compilers already did:
http://std.dkuug.dk/JTC1/SC22/WG14/www/docs/n983.htm
However, upon thinking about it, whether or not we allocate end of
structure padding does not matter, so using offsetof() to calculate the
size of the structure is fine, so long as we do not mix it with sizeof()
on structures with no array members.
In the case that we mix them and padding causes offsetof(struct_t,
vla_member[0]) to differ from sizeof(struct_t), we would be doing unsafe
operations if we underallocate via `offsetof()` and then overcopy via
sizeof().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
fdc2d30371 accidentally broke the
indentation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic
patch that caught it was:
./scripts/coccinelle/misc/flexible_array.cocci
The Linux kernel's documentation makes a good case for why we should not
use these:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught this. The semantic patch
that caught it was:
./scripts/coccinelle/api/alloc/zalloc-simple.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
The Linux 5.16.14 kernel's coccicheck caught these. The semantic patch
that caught them was:
./scripts/coccinelle/api/alloc/alloc_cast.cocci
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14372
d_alias may need to be converted to du.d_alias
depending on the kernel version.
d_alias is currently in only one place in the code which
changes
"hlist_for_each_entry(dentry, &inode->i_dentry, d_alias)"
to
"hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias)"
as neccesary.
This effectively results in a double macro expansion
for code that uses the zfs headers but already has its
own macro for just d_alias (lustre in this case).
Remove the conditional code for hlist_for_each_entry
and have a macro for "d_alias -> du.d_alias" instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gian-Carlo DeFazio <defazio1@llnl.gov>
Closes#14377
When activating filesystem features after receiving a snapshot, do
so only in syncing context.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14304Closes#14252
