After #17401 the Linux build produces some stack related warnings.
Silence them with the `STACK_FRAME_NON_STANDARD` macro.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17410
It makes no sense to limit read size below the block size, since
DMU will any way consume resources for the whole block, while the
current zfs_vnops_read_chunk_size is only 1MB, which is smaller
that maximum block size of 16MB. Plus in case of misaligned
Uncached I/O the buffer may get evicted between the chunks,
requiring repeating I/Os.
On 64-bit platforms increase zfs_vnops_read_chunk_size to 32MB.
It allows to less depend on speculative prefetcher if application
requests specific size, first not waiting for prefetcher to start
and later not prefetching more than needed.
Also while there, we don't need to align reads to the chunk size,
but only to a block size, which is smaller and so more forgiving.
My profiles show ~4% of CPU time saving when reading 16MB blocks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17415
With increasing number of metaslab classes it can be helpful for
debugging to know what we are looking at.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17409
Before this change in case of any allocation error ZFS always fallen
back to normal class. But with more of different classes available
we migth want more sophisticated logic. For example, it makes sense
to fall back from dedup first to special class (if it is allowed to
put DDT there) and only then to normal, since in a pool with dedup
and special classes populated normal class likely has performance
characteristics unsuitable for dedup.
This change implements general mechanism where fallback order is
controlled by the same spa_preferred_class() as the initial class
selection. And as first application it implements the mentioned
dedup->special->normal fallbacks. I have more plans for it later.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17391
The module parameter name was not changed in FreeBSD sysctls
list: 'vfs.zfs.vol.mode'. Also, on Linux side the name is:
/sys/module/zfs/parameters/zvol_volmode.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17386
The module parameter now is represented in FreeBSD sysctls list
with name: 'vfs.zfs.vol.prefetch_bytes'. The default value is 131072,
same as on Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17385
The child locking difference is simple enough to handle with a boolean.
The actual work is more involved, and it's easy to forget to change
things in both places when experimenting. Just collapse them.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17382
Fedora 40 has gone EOL as of May 2025, retire the CI builder.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17408
Rewrite is a one-time/rare bulk administrative operation, which
should minimally affect payload caching. Plus some avoided memory
copies in its data path allow to significantly increase its speed.
My tests show reduction of time to rewrite 28GB of uncompressed
files on NVMe pool from 17 to 9 seconds and minimal ARC usage.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17407
The io_uring interface is available as a Technology Preview.
Details: https://access.redhat.com/solutions/4723221
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17397
Make 'zvol_threads', 'zvol_num_taskqs' and 'zvol_request_sync' names
compatible with FreeBSD sysctl naming convention. Now the sysctls are
have a next form:
$ sysctl vfs.zfs.vol.threads
vfs.zfs.vol.threads: 0
$ sysctl vfs.zfs.vol.num_taskqs
vfs.zfs.vol.num_taskqs: 0
$ sysctl vfs.zfs.vol.request_sync
vfs.zfs.vol.request_sync: 0
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17406
5b9e695 added specific userspace versions of abd_os.h and abd_impl_os.h
for libzpool. However, abd.h and abd_impl.h, which include them, are
packaged with libzfs, so other programs building against libzfs can
fail to build, either because the headers aren't installed, or because
they aren't on any standard include path.
So, move abd_os.h and abd_impl_os.h to libspl, where they we will be
installed alongside abd.h and abd_impl.h in a known path.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16940Closes#17390Closes#17394
I've noticed that after some dedup tests system reboot ends up in
assertion about ms_defer tree not free. It seems to be caused by
DDT flushing still freeing some blocks while ZFS trying to reach
a final steady state due to spa_final_txg, while being set by
spa_export_common() on pool export, is not set when spa_unload()
is called by spa_evict_all() on system reboot/shutdown. Setting
spa_final_txg in spa_unload() fixes this issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17395
Disks can be removed either by the administrator via hotplug or by the
kernel when a disk failure occurs. The previous message implied that
removal was always manual, which could be confusing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17400
This patch fixes a race where vdev_remove_wanted may be set after probe
initiation, which could otherwise trigger redundant fault and removal.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17400
Ubuntu 20.04 has gone EOL as of April 2025, retire the CI builder.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17403
Since it was disabled for 2.3, there's been no confirmed sightings of
strange IO errors, misalignments or related shenanigans. Absence of
evidence and all that, but I'd rather fix bugs in the new code than in
the old.
"It isn't hubris until he's failed."
-- Chrisjen Avasarala
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17399
Usually the IO type can be inferred from the other fields (in
particular, priority and flags) sometimes it's not easy to see. This is
just another little debug helper.
May 27 2025 00:54:54.024110493 ereport.fs.zfs.data
class = "ereport.fs.zfs.data"
ena = 0x1f5ecfae600801
...
zio_delta = 0x0
zio_type = 0x2 [WRITE]
zio_priority = 0x3 [ASYNC_WRITE]
zio_objset = 0x0
Document zio_type and zio_priority.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17381
If the kernel fails to allocate the gendisk, zvo_disk will be NULL, and
derefencing it will explode. So don't do that.
Sponsored-by: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17396
We silence `objtool` warnings on some object files using
`OBJECT_FILES_NON_STANDARD_some_file.o`. Nowadays `objtool` is
needed for CPU vulnerability mitigations and a lot more
functionality so its use is desirable.
Just remove the `OBJECT_FILES_NON_STANDARD` definitions. A follow-up
commit is needed to make the offending files standard and address
the compile time warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17401Closes#17364
The module parameter now is represented in FreeBSD sysctls list with
name: 'vfs.zfs.vol.inhibit_dev'. The default value is '0', same as on
Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17384
As commit 320f0c6 did for Linux, connect POSIX_FADV_WILLNEED
up to dmu_prefetch() on FreeBSD.
While there, fix portability problems in tests/functional/fadvise.
1. Instead of relying on the numerical values of POSIX_FADV_XXX macros,
accept macro names as arguments to the file_fadvise program. (The
numbers happen to match on Linux and FreeBSD, but future systems may
vary and it seems a little strange/raw to count on that.)
2. For implementation reasons, SEQUENTIAL doesn't reach ZFS via FreeBSD
VFS currently (perhaps something that should be investigated in
FreeBSD). Since on Linux we're treating SEQUENTIAL and WILLNEED the
same, it doesn't really matter which one we use, so switch the test
over to WILLNEED exercise the new prefetch code on both OSes the
same way.
Reviewed-by: Mateusz Guzik <mjg@FreeBSD.org>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Thomas Munro <tmunro@FreeBSD.org>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17379
Three occurences with an 'e', and all of them mine. Maybe it's an
British thing?
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
This was fully removed from Linux in 4.15, so we won't be seeing it
again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Since 3.17 Linux has provided param ops for 64-bit ints, so we don't
need to use our own anymore.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing uses them now.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
The use for spl_taskq_kick was the only use, and the comment that
module_param_call is obsolete is no longer true - it's still very much
used even in recent kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing in any FreeBSD code uses them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
If a variable is only available in the kernel, then the tunable should
also only be available there.
This matters very little so long as we don't have userspace tunables,
but its still good hygeine.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
It actually doesn't matter if it's not initialised when we first query
the current value; it just returns empty-string. A crash is quite
obnoxious even if it is a rare case.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Likely it's only int64 for comparison with ssize_t, which is signed.
However, it would make no sense for it to be less than 0 or greater than
4G, so making it a regular uint will make it safe for comparison and
remove the only S64 tunable in core.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Update the META file to reflect compatibility with the 6.15
kernel.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17393
failmode=continue is in a sorry state. Originally designed to fix a very
specific problem, it causes crashes and panics for most people who end
up trying to use it. At this point, we should either remove it entirely,
or try to make it more usable.
With this patch, I choose the latter. While the feature is fundamentally
unpredictable and prone to race conditions, it should be possible to get
it to the point where it can at least sometimes be useful for some
users. This patch fixes one of the major issues with failmode=continue:
it interrupts even ZIOs that are patiently waiting in line behind stuck
IOs.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17372
By the assertion, vdev_geom_io_done() only expects ENXIO on an error
when the geom is a top-level (allocating) vdev[1][2]. However, zinject
currently can't insert ENXIO directly, possibly because on Solaris
outright disk failures were reported with EIO[2][3].
This is a narrow workaround to convert EIO to ENXIO when injections are
enabled, to avoid the assertion and allow the test suite to test
behaviour related to probe failure on FreeBSD.
1. freebsd/freebsd-src@37ec52ca7a
2. freebsd/freebsd-src@cd730bd6b2
3. illumos/illumos-gate@ea8dc4b6d2
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
This is the cheap way to keep non-user functions working after
break-on-suspend becomes default.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
This adjusts dmu_tx_assign/dmu_tx_wait to be interruptable if the pool
suspends while they're waiting, rather than just on the initial check
before falling back into a wait.
Since that's not always wanted, add a DMU_TX_SUSPEND flag to ignore
suspend entirely, effectively returning to the previous behaviour.
With that, it shouldn't be possible for anything with a standard
dmu_tx_assign/wait/abort loop to block under failmode=continue.
Also should be a bit tighter than the old behaviour, where a
VERIFY0(dmu_tx_assign(DMU_TX_WAIT)) could technically fail if the pool
is already suspended and failmode=continue.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
Mostly for a little more type checking and debugging visibility.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
This allows a caller to request a wait for txg sync, with an appropriate
error return if the pool is suspended or becomes suspended during the
wait.
To support this, txg_wait_kick() is added to signal the sync condvar,
which wakes up the waiters, causing them to loop and reconsider their
wait conditions again. zio_suspend() now calls this to trigger the break
if the pool suspends while waiting.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17355
It was reported that channel programs' zfs.get_prop doesn't work for
dataset properties encryption and encryptionroot.
They are handled in get_special_prop due to the need to call
dsl_dataset_crypt_stats to load those dsl props.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Graham Christensen <graham@grahamc.com>
Closes#17280
2aa3fbe761 extended zinject_record_t, and in doing so inadvertently
extended zfs_cmd_t, which broke compatibility with userspace tools
without the change.
This fixes that by using some of the unused space in zfs_cmd_t for the
extra fields. We also add an assert to trigger a compile error if the
size ever changes.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17367
It has existed as a warning since 0.8.3, 5+ years ago. I think people
have had enough time.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17376
It's been many years, we can probably do without.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17376
In truenas_pylibzfs, we query list of encrypted datasets several times,
which is expensive. This commit exposes a public API zfs_is_encrypted()
to get encryption status from fast stat path without having to refresh
the properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17368
Before this change write log size TXG throttling mechanism was
accounting only user payload bytes. But the actual ZIL both on
disk and especially in memory include headers of hundred(s) of
bytes. Not accouting those may allow applications like
bonnie++, in their wisdom writing one byte at a time, to consume
excessive amount of memory and ZIL/SLOG in one TXG.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17373
This test covers a bug fixed by commit ea74cde: performing an
incremental non-raw send from an encrypted filesystem followed by
exporting the pool. Before that commit, exporting the sending pool
in this scenario would trigger a panic:
VERIFY(avl_is_empty(&sk->sk_dsl_keys)) failed
PANIC at dsl_crypt.c:353:spa_keystore_fini()
Call Trace:
spl_dumpstack+0x29/0x2f [spl]
spl_panic+0xd1/0xe9 [spl]
spl_assert.constprop.0+0x1a/0x30 [zfs]
spa_keystore_fini+0xc2/0xf0 [zfs]
spa_deactivate+0x25f/0x610 [zfs]
spa_evict_all+0xf4/0x200 [zfs]
spa_fini+0x13/0x140 [zfs]
zfs_kmod_fini+0x72/0xc0 [zfs]
openzfs_fini_os+0x13/0x3a [zfs]
openzfs_fini+0x9/0x6b8 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#17366
