5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5027https://github.com/illumos/illumos-gate/commit/b515258
Porting Notes:
* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.
* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes. Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.
* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize. This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.
* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX. This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M.
* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space. We should be able to relax
this one the ABD patches are merged.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#354
5056 ZFS deadlock on db_mtx and dn_holds
Author: Justin Gibbs <justing@spectralogic.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5056https://github.com/illumos/illumos-gate/commit/bc9014e
Porting Notes:
sa_handle_get_from_db():
- the original patch includes an otherwise unmentioned fix for a
possible usage of an uninitialised variable
dmu_objset_open_impl():
- Under Illumos list_link_init() is the same as filling a list_node_t
with NULLs, so they don't notice if they miss doing list_link_init()
on a zero'd containing structure (e.g. allocated with kmem_zalloc as
here). Under Linux, not so much: an uninitialised list_node_t goes
"Boom!" some time later when it's used or destroyed.
dmu_objset_evict_dbufs():
- reduce stack usage using kmem_alloc()
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The functions sa_find_sizes() and sa_build_layout() fail to account
for the additional 2 bytes of SA header space when calculating whether
a variable size attribute might spill over. They may consequently
determine that an attribute will fit in the bonus buffer along with a
spill block pointer, when in reality the attribute would be partially
overwritten by the spill block pointer if spill over occurs. This also
causes an inconsistency between the SA header size and the number of
variable size attributes in the layout, tripping an assertion when
debugging is on. The following reproducer demonstrates the problem.
ln -s $(perl -e 'print "z" x 20') file
setfattr -h -n trusted.foo -v $(perl -e 'print "z" x 200') file
Even though sa_find_sizes() computes the index of the attribute where
spill-over will occur, sa_build_layouts() discards the result and
recomputes it itself. As it turns out, both functions get it wrong.
Since this computation is awkward and, as history has shown, easy to
screw up, let's just do it in one place. This patch fixes the bug in
sa_find_sizes() and updates sa_build_layout() to use the result
computed there.
Also improve the comments in sa_find_sizes().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3070
The sa_modify_attrs() function can add, remove or replace an SA.
The main loop in the function uses the index "i" to iterate over the
existing SAs and uses the index "j" for writing them into a new buffer
via SA_ADD_BULK_ATTR(). The write index, "j" is incremented on remove
(SA_REMOVE) operations which leads to a corruption in the new SA buffer.
This patch remove the increment for SA_REMOVE operations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3028
The SA spill_cache was originally introduced to avoid the need to
perform large kmem or vmem allocations. Instead a small dedicated
cache of preallocated SA buffers was kept.
This solution was viable while the maximum block size was limited
to 128K. But with the planned increase of the maximum block size
to 16M callers need to migrate to the zio_buf_alloc(). However,
they should be aware this interface is expected to change again
once the zio buffers are fully backed by scatter-gather lists.
Alternately, if the callers know these buffers will never be large
or be infrequently accessed they may kmem_alloc() or vmem_alloc()
the needed temporary space.
This change has the additional benegit of bringing the code back
inline with the upstream Illumos source.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
By marking DMU transaction processing contexts with PF_FSTRANS
we can revert the KM_PUSHPAGE -> KM_SLEEP changes. This brings
us back in line with upstream. In some cases this means simply
swapping the flags back. For others fnvlist_alloc() was replaced
by nvlist_alloc(..., KM_PUSHPAGE) and must be reverted back to
fnvlist_alloc() which assumes KM_SLEEP.
The one place KM_PUSHPAGE is kept is when allocating ARC buffers
which allows us to dip in to reserved memory. This is again the
same as upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In the case where a variable-sized SA overlaps the spill block pointer and
a new variable-sized SA is being added, the header size was improperly
calculated to include the to-be-moved SA. This problem could be
reproduced when xattr=sa enabled as follows:
ln -s $(perl -e 'print "x" x 120') blah
setfattr -n security.selinux -v blahblah -h blah
The symlink is large enough to interfere with the spill block pointer and
has a typical SA registration as follows (shown in modified "zdb -dddd"
<SA attr layout obj> format):
[ ... ZPL_DACL_COUNT ZPL_DACL_ACES ZPL_SYMLINK ]
Adding the SA xattr will attempt to extend the registration to:
[ ... ZPL_DACL_COUNT ZPL_DACL_ACES ZPL_SYMLINK ZPL_DXATTR ]
but since the ZPL_SYMLINK SA interferes with the spill block pointer, it
must also be moved to the spill block which will have a registration of:
[ ZPL_SYMLINK ZPL_DXATTR ]
This commit updates extra_hdrsize when this condition occurs, allowing
hdrsize to be subsequently decreased appropriately.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #2214
Issue #2228
Issue #2316
Issue #2343
During the update process in sa_modify_attrs(), the sizes of existing
variably-sized SA entries are obtained from sa_lengths[]. The case where
a variably-sized SA was being replaced neglected to increment the index
into sa_lengths[], so subsequent variable-length SAs would be rewritten
with the wrong length. This patch adds the missing increment operation
so all variably-sized SA entries are stored with their correct lengths.
Previously, a size-changing update of a variably-sized SA that occurred
when there were other variably-sized SAs in the bonus buffer would cause
the subsequent SAs to be corrupted. The most common case in which this
would occur is when a mode change caused the ZPL_DACL_ACES entry to
change size when a ZPL_DXATTR (SA xattr) entry already existed.
The following sequence would have caused a failure when xattr=sa was in
force and would corrupt the bonus buffer:
open(filename, O_WRONLY | O_CREAT, 0600);
...
lsetxattr(filename, ...); /* create xattr SA */
chmod(filename, 0650); /* enlarges the ACL */
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1978
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written. Others were
caused when the common code was slightly adjusted for Linux.
This patch contains no functional changes. It only refreshes
the code to conform to style guide.
Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request. The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1821
Under the right conditions sa_find_sizes() will compute an incorrect
size of the system attribute (SA) header. This causes a failed assertion
when the SA_HDR_SIZE_MATCH_LAYOUT() test returns false, and may lead
to corruption of SA data.
The bug presents itself when there are more than two variable-length SAs
of just the right size to fit in the bonus buffer of a dnode. The
existing logic fails to account for the SA header space needed to store
the sizes of all the variable-length SAs.
A reproducer was possible on Linux by setting the xattr=sa dataset
property and storing xattrs on symbolic links (Issue #1648). Note the
corrupt link target name:
$ zfs set xattr=sa tank/fish
$ cd /tank/fish
$ ln -fs 12345678901234567 link
$ setfattr -n trusted.0000000000000000000 -v 0x000000000000000000000000 -h link
$ setfattr -n trusted.1111111111111111111 -v 0x000000000000000000000000 -h link
$ ls -l link
lrwxrwxrwx 1 root root 17 Dec 6 15:40 link -> 90123456701234567
Commit 6a7c0ccca4 worked around this bug
by forcing xattr's on symlinks to be stored in directory format. This
change implements a proper fix, so the workaround can now be reverted.
The reference link below contains a reproducer for FreeBSD.
References:
http://lists.open-zfs.org/pipermail/developer/2013-November/000306.html
Ported-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1890
3742 zfs comments need cleaner, more consistent style
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3742illumos/illumos-gate@f717074149
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. The change to zfs_vfsops.c was dropped because it involves
zfs_mount_label_policy, which does not exist in the Linux port.
3598 want to dtrace when errors are generated in zfs
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/3598illumos/illumos-gate@be6fd75a69
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. include/sys/zfs_context.h has been modified to render some new
macros inert until dtrace is available on Linux.
2. Linux-specific changes have been adapted to use SET_ERROR().
3. I'm NOT happy about this change. It does nothing but ugly
up the code under Linux. Unfortunately we need to take it to
avoid more merge conflicts in the future. -Brian
3522 zfs module should not allow uninitialized variables
Reviewed by: Sebastien Roy <seb@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/3522illumos/illumos-gate@d5285cae91
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting notes:
1. ZFSOnLinux had already addressed many of these issues because of
its use of -Wall. However, the manner in which they were addressed
differed. The illumos fixes replace the ones previously made in
ZFSOnLinux to reduce code differences.
2. Part of the upstream patch made a small change to arc.c that might
address zfsonlinux/zfs#1334.
3. The initialization of aclsize in zfs_log_create() differs because
vsecp is a NULL pointer on ZFSOnLinux.
4. The changes to zfs_register_callbacks() were dropped because it
has diverged and needs to be resynced.
The PaX team modified the kernel's modpost to report writeable function
pointers as section mismatches because they are potential exploit
targets. We could ignore the warnings, but their presence can obscure
actual issues. Proper const correctness can also catch programming
mistakes.
Building the kernel modules against a PaX/GrSecurity patched Linux 3.4.2
kernel reports 133 section mismatches prior to this patch. This patch
eliminates 130 of them. The quantity of writeable function pointers
eliminated by constifying each structure is as follows:
vdev_opts_t 52
zil_replay_func_t 24
zio_compress_info_t 24
zio_checksum_info_t 9
space_map_ops_t 7
arc_byteswap_func_t 5
The remaining 3 writeable function pointers cannot be addressed by this
patch. 2 of them are in zpl_fs_type. The kernel's sget function requires
that this be non-const. The final writeable function pointer is created
by SPL_SHRINKER_DECLARE. The kernel's set_shrinker() and
remove_shrinker() functions also require that this be non-const.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1300
When a system attribute layout is created an inconsistency may occur
between the system attribute header (sa_hdr_phys_t) size and the
variable-sized attribute count stored in the layout. The inconsistency
results in the following failed assertion when SA_HDR_SIZE_MATCH_LAYOUT
returns false:
SPLError: 11315:0:(sa.c:1541:sa_find_idx_tab())
ASSERTION((IS_SA_BONUSTYPE(bonustype) && SA_HDR_SIZE_MATCH_LAYOUT(hdr,
tb)) || !IS_SA_BONUSTYPE(bonustype) || (IS_SA_BONUSTYPE(bonustype) &&
hdr->sa_layout_info == 0)) failed
The bug originates in this snippet from sa_find_sizes().
if (is_var_sz && var_size > 1) {
if (P2ROUNDUP(hdrsize + sizeof (uint16_t),
*total < full_space) {
hdrsize += sizeof (uint16_t);
This assumes that the current variable-sized attribute will be stored in
the current buffer and accounts for the space needed to store its size
in the sa_hdr_phys_t. However if the next attribute spills over we need
to store a blkptr_t at the end of the bonus buffer to point to the spill
block. If the current attribute is in the way of the blkptr_t then it
too will be relocated into the spill block. But since we've already
accounted for it in the header size we get the inconsistency described
above.
To avoid this, record the index of the last variable-sized attribute
that prompted a hdrsize increase, and reverse the increase if we later
determine that that attribute will be relocated to the spill block.
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1250
A rounding discrepancy exists between how sa_build_layouts() and
sa_find_sizes() calculate when the spill block needs to be kicked in.
This results in a narrow size range where sa_build_layouts() believes
there must be a spill block allocated but due to the discrepancy there
isn't. A panic then occurs when the hdl->sa_spill NULL pointer is
dereferenced.
The following reproducer for this bug was isolated:
truncate -s 128m /tmp/tank
zpool create tank /tmp/tank
zfs create -o xattr=sa tank/fish
ln -s `perl -e 'print "z" x 41'` /tank/fish/z
setfattr -hn trusted.foo -v`perl -e 'print "z"x45'` /tank/fish/z
This test results in roughly the following system attribute (SA)
layout:
176 bytes - "standard" SA's
41 bytes - name of symbolic link target
100 bytes - XDR encoded nvlist for xattr
---
317 bytes - total
Because 317 is less than DN_MAX_BONUSLEN (320), sa_find_sizes()
decides no spill block is needed. But sa_build_layouts() rounds 41 up
to 48 when computing the space requirements so it tries to switch to
the spill block.
Note that we were only able to reproduce this bug using a combination
of symbolic links and the Linux-specific xattr=sa dataset property.
So while this issue is not technically Linux-specific, it may be
difficult or impossible to hit the narrow size range needed to
reproduce it on other platforms.
To fix the discrepancy, round the running total in sa_find_sizes() up
to an 8-byte boundary before accounting for each SA, since this is how
they will be stored in the bonus and (possibly) spill buffers.
To make the intent of the code more clear, explicitly assert key
assumptions about expected alignment of data and whether spill-over
will occur.
Signed-off-by: Matthew Ahrens <mahrens@delphix.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1240
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>
References:
illumos/illumos-gate@53089ab7c8illumos/illumos-gate@ad135b5d64
illumos changeset: 13700:2889e2596bd6
https://www.illumos.org/issues/2619https://www.illumos.org/issues/2747
NOTE: The grub specific changes were not ported. This change
must be made to the Linux grub packages.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Differences between how paging is done on Solaris and Linux can cause
deadlocks if KM_SLEEP is used in any the following contexts.
* The txg_sync thread
* The zvol write/discard threads
* The zpl_putpage() VFS callback
This is because KM_SLEEP will allow for direct reclaim which may result
in the VM calling back in to the filesystem or block layer to write out
pages. If a lock is held over this operation the potential exists to
deadlock the system. To ensure forward progress all memory allocations
in these contexts must us KM_PUSHPAGE which disables performing any I/O
to accomplish the memory allocation.
Previously, this behavior was acheived by setting PF_MEMALLOC on the
thread. However, that resulted in unexpected side effects such as the
exhaustion of pages in ZONE_DMA. This approach touchs more of the zfs
code, but it is more consistent with the right way to handle these cases
under Linux.
This is patch lays the ground work for being able to safely revert the
following commits which used PF_MEMALLOC:
21ade34 Disable direct reclaim for z_wr_* threads
cfc9a5c Fix zpl_writepage() deadlock
eec8164 Fix ASSERTION(!dsl_pool_sync_context(tx->tx_pool))
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #726
When calling sa_update() and friends it is possible that a spill
buffer will be needed to accomidate the update. When this happens
a hold is taken on the new dbuf and that hold must be released
before calling dmu_tx_commit(). Failing to release the hold will
cause a copy of the dbuf to be made in dbuf_sync_leaf(). This is
done to ensure further updates to the dbuf never sneak in to the
syncing txg.
This could be left to the sa_update() caller. But then the caller
would need to be aware of this internal SA implementation detail.
It is therefore preferable to handle this all internally in the
SA implementation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#503Closes#513
Add a SA interface which allows us to release the spill block
from a SA handle without destroying the handle. This is useful
because we can then ensure that a copy of the dirty spill block
is not made at sync time due to the extra hold. Susequent calls
to sa_update() or sa_lookup() with transparently refetch the
spill block dbuf from the ARC hash.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The current ZFS implementation stores xattrs on disk using a hidden
directory. In this directory a file name represents the xattr name
and the file contexts are the xattr binary data. This approach is
very flexible and allows for arbitrarily large xattrs. However,
it also suffers from a significant performance penalty. Accessing
a single xattr can requires up to three disk seeks.
1) Lookup the dnode object.
2) Lookup the dnodes's xattr directory object.
3) Lookup the xattr object in the directory.
To avoid this performance penalty Linux filesystems such as ext3
and xfs try to store the xattr as part of the inode on disk. When
the xattr is to large to store in the inode then a single external
block is allocated for them. In practice most xattrs are small
and this approach works well.
The addition of System Attributes (SA) to zfs provides us a clean
way to make this optimization. When the dataset property 'xattr=sa'
is set then xattrs will be preferentially stored as System Attributes.
This allows tiny xattrs (~100 bytes) to be stored with the dnode and
up to 64k of xattrs to be stored in the spill block. If additional
xattr space is required, which is unlikely under Linux, they will be
stored using the traditional directory approach.
This optimization results in roughly a 3x performance improvement
when accessing xattrs which brings zfs roughly to parity with ext4
and xfs (see table below). When multiple xattrs are stored per-file
the performance improvements are even greater because all of the
xattrs stored in the spill block will be cached.
However, by default SA based xattrs are disabled in the Linux port
to maximize compatibility with other implementations. If you do
enable SA based xattrs then they will not be visible on platforms
which do not support this feature.
----------------------------------------------------------------------
Time in seconds to get/set one xattr of N bytes on 100,000 files
------+--------------------------------+------------------------------
| setxattr | getxattr
bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa
------+--------------------------------+------------------------------
1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43
32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48
256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14
1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27
4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94
16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55
65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12*
Legend:
* ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'.
* xfs - Stock RHEL6.1 xfs mounted with default options.
* zfs-dir - Directory based xattrs only.
* zfs-sa - Prefer SAs but spill in to directories as needed, a
trailing * indicates overflow in to directories occured.
NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file.
NOTE: XFS and ZFS have no limit on xattr name/value pairs per file.
NOTE: Linux limits individual name/value pairs to 65536 bytes.
NOTE: All setattr/getattr's were done after dropping the cache.
NOTE: All tests were run against a single hard drive.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #443
When calculating space needed for SA_BONUS buffers, hdrsize is
always rounded up to next 8-aligned boundary. However, in two places
the round up was done against sum of 'total' plus hdrsize. On the
other hand, hdrsize increments by 4 each time, which means in certain
conditions, we would end up returning with will_spill == 0 and
(total + hdrsize) larger than full_space, leading to a failed
assertion because it's invalid for dmu_set_bonus.
Reviewed by: Matthew Ahrens <matt@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References to Illumos issue:
https://www.illumos.org/issues/1661
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#426
Export all the symbols for the system attribute (SA) API. This
allows external module to cleanly manipulate the SAs associated
with a dnode. Documention for the SA API can be found in the
module/zfs/sa.c source.
This change also removes the zfs_sa_uprade_pre, and
zfs_sa_uprade_post prototypes. The functions themselves were
dropped some time ago.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Basic compilation of the bulk of zfs_znode.c has been enabled. After
much consideration it was decided to convert the existing vnode based
interfaces to more friendly Linux interfaces. The following commits
will systematically replace update the requiter interfaces. There
are of course pros and cons to this decision.
Pros:
* This simplifies intergration with Linux in the long term. There is
no longer any need to manage vnodes which are a foreign concept to
the Linux VFS.
* Improved long term maintainability.
* Minor performance improvements by removing vnode overhead.
Cons:
* Added work in the short term to modify multiple ZFS interfaces.
* Harder to pull in changes if we ever see any new code from Solaris.
* Mixed Solaris and Linux interfaces in some ZFS code.
This topic branch contains all the changes needed to integrate the user
side zfs tools with Linux style devices. Primarily this includes fixing
up the Solaris libefi library to be Linux friendly, and integrating with
the libblkid library which is provided by e2fsprogs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix non-c90 compliant code, for the most part these changes
simply deal with where a particular variable is declared.
Under c90 it must alway be done at the very start of a block.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
