Use the standard Linux MODULE_VERSION macro to expose the installed
zavl, znvpair, zunicode, zcommon, zfs, and zpios module versions.
This will also automatically add a checksum of the .c files and
headers in "srcversion". See:
/sys/module/zavl/version
/sys/module/zavl/srcversion
/sys/module/znvpair/version
/sys/module/znvpair/srcversion
/sys/module/zunicode/version
/sys/module/zunicode/srcversion
/sys/module/zcommon/version
/sys/module/zcommon/srcversion
/sys/module/zfs/version
/sys/module/zfs/srcversion
/sys/module/zpios/version
/sys/module/zpios/srcversion
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1923
4045 zfs write throttle & i/o scheduler performance work
1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync
read, sync write, async read, async write, and scrub/resilver. The scheduler
issues a number of concurrent i/os from each class to the device. Once a class
has been selected, an i/o is selected from this class using either an elevator
algorithem (async, scrub classes) or FIFO (sync classes). The number of
concurrent async write i/os is tuned dynamically based on i/o load, to achieve
good sync i/o latency when there is not a high load of writes, and good write
throughput when there is. See the block comment in vdev_queue.c (reproduced
below) for more details.
2. The write throttle (dsl_pool_tempreserve_space() and
txg_constrain_throughput()) is rewritten to produce much more consistent delays
when under constant load. The new write throttle is based on the amount of
dirty data, rather than guesses about future performance of the system. When
there is a lot of dirty data, each transaction (e.g. write() syscall) will be
delayed by the same small amount. This eliminates the "brick wall of wait"
that the old write throttle could hit, causing all transactions to wait several
seconds until the next txg opens. One of the keys to the new write throttle is
decrementing the amount of dirty data as i/o completes, rather than at the end
of spa_sync(). Note that the write throttle is only applied once the i/o
scheduler is issuing the maximum number of outstanding async writes. See the
block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for
more details.
This diff has several other effects, including:
* the commonly-tuned global variable zfs_vdev_max_pending has been removed;
use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead.
* the size of each txg (meaning the amount of dirty data written, and thus the
time it takes to write out) is now controlled differently. There is no longer
an explicit time goal; the primary determinant is amount of dirty data.
Systems that are under light or medium load will now often see that a txg is
always syncing, but the impact to performance (e.g. read latency) is minimal.
Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this.
* zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression,
checksum, etc. This improves latency by not allowing these CPU-intensive tasks
to consume all CPU (on machines with at least 4 CPU's; the percentage is
rounded up).
--matt
APPENDIX: problems with the current i/o scheduler
The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem
with this is that if there are always i/os pending, then certain classes of
i/os can see very long delays.
For example, if there are always synchronous reads outstanding, then no async
writes will be serviced until they become "past due". One symptom of this
situation is that each pass of the txg sync takes at least several seconds
(typically 3 seconds).
If many i/os become "past due" (their deadline is in the past), then we must
service all of these overdue i/os before any new i/os. This happens when we
enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in
the future. If we can't complete all the i/os in 2.5 seconds (e.g. because
there were always reads pending), then these i/os will become past due. Now we
must service all the "async" writes (which could be hundreds of megabytes)
before we service any reads, introducing considerable latency to synchronous
i/os (reads or ZIL writes).
Notes on porting to ZFS on Linux:
- zio_t gained new members io_physdone and io_phys_children. Because
object caches in the Linux port call the constructor only once at
allocation time, objects may contain residual data when retrieved
from the cache. Therefore zio_create() was updated to zero out the two
new fields.
- vdev_mirror_pending() relied on the depth of the per-vdev pending queue
(vq->vq_pending_tree) to select the least-busy leaf vdev to read from.
This tree has been replaced by vq->vq_active_tree which is now used
for the same purpose.
- vdev_queue_init() used the value of zfs_vdev_max_pending to determine
the number of vdev I/O buffers to pre-allocate. That global no longer
exists, so we instead use the sum of the *_max_active values for each of
the five I/O classes described above.
- The Illumos implementation of dmu_tx_delay() delays a transaction by
sleeping in condition variable embedded in the thread
(curthread->t_delay_cv). We do not have an equivalent CV to use in
Linux, so this change replaced the delay logic with a wrapper called
zfs_sleep_until(). This wrapper could be adopted upstream and in other
downstream ports to abstract away operating system-specific delay logic.
- These tunables are added as module parameters, and descriptions added
to the zfs-module-parameters.5 man page.
spa_asize_inflation
zfs_deadman_synctime_ms
zfs_vdev_max_active
zfs_vdev_async_write_active_min_dirty_percent
zfs_vdev_async_write_active_max_dirty_percent
zfs_vdev_async_read_max_active
zfs_vdev_async_read_min_active
zfs_vdev_async_write_max_active
zfs_vdev_async_write_min_active
zfs_vdev_scrub_max_active
zfs_vdev_scrub_min_active
zfs_vdev_sync_read_max_active
zfs_vdev_sync_read_min_active
zfs_vdev_sync_write_max_active
zfs_vdev_sync_write_min_active
zfs_dirty_data_max_percent
zfs_delay_min_dirty_percent
zfs_dirty_data_max_max_percent
zfs_dirty_data_max
zfs_dirty_data_max_max
zfs_dirty_data_sync
zfs_delay_scale
The latter four have type unsigned long, whereas they are uint64_t in
Illumos. This accommodates Linux's module_param() supported types, but
means they may overflow on 32-bit architectures.
The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most
likely to overflow on 32-bit systems, since they express physical RAM
sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to
2^32 which does overflow. To resolve that, this port instead initializes
it in arc_init() to 25% of physical RAM, and adds the tunable
zfs_dirty_data_max_max_percent to override that percentage. While this
solution doesn't completely avoid the overflow issue, it should be a
reasonable default for most systems, and the minority of affected
systems can work around the issue by overriding the defaults.
- Fixed reversed logic in comment above zfs_delay_scale declaration.
- Clarified comments in vdev_queue.c regarding when per-queue minimums take
effect.
- Replaced dmu_tx_write_limit in the dmu_tx kstat file
with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts
how many times a transaction has been delayed because the pool dirty
data has exceeded zfs_delay_min_dirty_percent. The latter counts how
many times the pool dirty data has exceeded zfs_dirty_data_max (which
we expect to never happen).
- The original patch would have regressed the bug fixed in
zfsonlinux/zfs@c418410, which prevented users from setting the
zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE.
A similar fix is added to vdev_queue_aggregate().
- In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the
heap instead of the stack. In Linux we can't afford such large
structures on the stack.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brendan Gregg <brendan.gregg@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
http://www.illumos.org/issues/4045illumos/illumos-gate@69962b5647
Ported-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1913
Fix a lock contention issue by allowing threads not holding
ZPL locks to block when waiting to assign a transaction.
Porting Notes:
zfs_putpage() still uses TXG_NOWAIT, unlike the upstream version. This
case may be a contention point just like zfs_write(), however it is not
safe to block here since it may be called during memory reclaim.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Boris Protopopov <boris.protopopov@nexenta.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/4347illumos/illumos-gate@e722410c49
Ported-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This broke compilation against Linux 3.13 and GCC 4.7.3.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1906
As part of zfs_sb_teardown() there is an assertion that all inodes
which are part of the zsb->z_all_znodes list have at least one
reference on them. This is always true for the standard unmount
case but there are two other cases where it is not strictly true.
* zfs_ioc_rollback() - This is the most common case and it results
from the fact that we aren't unmounting the filesystem. During a
normal unmount the MS_ACTIVE flag will be cleared on the super block
causing iput_final() to evict the inode when its reference count
drops to zero. However, during a rollback MS_ACTIVE remains set
since we're rolling back a live filesystem and need to preserve the
existing super block. This allows inodes with a zero reference count
to stay in the cache thereby violating the assertion.
* destroy_inode() / zfs_sb_teardown() - There exists a small race
between dropping the last reference on an inode and removing it from
the zsb->z_all_znodes list. This is unlikely to occur but could also
trigger the assertion which is incorrect. The inode may safely have
a zero reference count in this case.
Since allowing a zero reference count on the inode is expected and
safe for both of these cases the simplest thing to do is remove the
ASSERT. This code is only enabled for default builds so removing
this entirely is a very safe change.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#1417Closes#1536
Added:
Adata S396 (obtained from drive_id)
Apple MacBookAir3,1 SSD (obtained from drive_id)
Apple MacBookPro10,1 SSD (obtained from drive_id)
Intel 510 (obtained from drive_id)
Intel 710 (obtained from drive_id)
Intel DC S3500 (obtained from drive_id)
Netapp LUN (obtained from illumos user's sd.conf)
OCZ Agility 3 (obtained from drive_id)
OCZ Vertex (obtained from drive_id)
Samsung PM800 (obtained from drive_id)
Sandisk U100 (obtained from drive_id)
Sun Comstar (obtained from illumos user's sd.conf)
Notes:
1. The entries for the Intel DC S3500 were extrapolated from the 800GB
model's entry, which is "ATA INTEL SSDSC2BB80".
2. The entires for the Intel 710 were extrapolated from the 120GG
model's entry, which is "ATA INTEL SSDSA2BZ12".
3. The entires for the Intel 510 were extrapolated from the 250GB
model's entry, which is "ATA INTEL SSDSC2MH25".
4. The entires for the Apple MacBookPro10,1 SSD were extrapolated from
the 512GB model's entry, which is "ATA APPLE SSD SM512E". Google
searches suggest that this is a rebadged Samsung 830.
5. The entires for the Apple MacBookAir3,1 SSD were extrapolated from
the 128GB model's entry, which is "ATA APPLE SSD TS128C". Google
searches suggest that this is a rebadged Kingston SSDNow V+ 100 (based
on Toshiba).
6. Sun Comstar is an iSCSI Target, so we cannot tell what the correct
sector size is through this method. We list it only for reference
purposes, but it is commented out. Similarly, it is not clear what the
right thing to do for Netapp is, so we comment it out.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1907
This should hopefully catch the rest of the allocations in the
user hold/release processing that were missed by commit
65c67ea86e.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1852Closes#1855
This check was originally added for SLES10, a093c6a, to check for
a 'struct vfsmount *' argument which they added. However, since
SLES10 is based on a 2.6.16 kernel which is no longer supported
this functionality was dropped. The checks were refactored to
support Linux 3.13 without concern for historical versions.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#312
GCC 4.8.1 complained about an unused flags variable when building
against Linux 2.6.26.8:
/var/tmp/portage/sys-kernel/spl-9999/work/spl-9999/module/spl/../../module/spl/spl-condvar.c:
In function ‘__cv_init’:
/var/tmp/portage/sys-kernel/spl-9999/work/spl-9999/module/spl/../../module/spl/spl-condvar.c:39:6:
error: variable ‘flags’ set but not used
[-Werror=unused-but-set-variable]
int flags = KM_SLEEP;
^
cc1: all warnings being treated as errors
Additionally, the superfluous code uses a preempt_count variable that is
no longer available on Linux 3.13. Deleting the unnecessary code fixes a
Linux 3.13 compatibility issue.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#312
Currently, using msync() results in the following code path:
sys_msync -> zpl_fsync -> filemap_write_and_wait_range -> zpl_writepages -> write_cache_pages -> zpl_putpage
In such a code path, zil_commit() is called as part of zpl_putpage().
This means that for each page, the write is handed to the DMU, the ZIL
is committed, and only then do we move on to the next page. As one might
imagine, this results in atrocious performance where there is a large
number of pages to write: instead of committing a batch of N writes,
we do N commits containing one page each. In some extreme cases this
can result in msync() being ~700 times slower than it should be, as well
as very inefficient use of ZIL resources.
This patch fixes this issue by making sure that the requested writes
are batched and then committed only once. Unfortunately, the
implementation is somewhat non-trivial because there is no way to run
write_cache_pages in SYNC mode (so that we get all pages) without
making it wait on the writeback tag for each page.
The solution implemented here is composed of two parts:
- I added a new callback system to the ZIL, which allows the caller to
be notified when its ITX gets written to stable storage. One nice
thing is that the callback is called not only in zil_commit() but
in zil_sync() as well, which means that the caller doesn't have to
care whether the write ended up in the ZIL or the DMU: it will get
notified as soon as it's safe, period. This is an improvement over
dmu_tx_callback_register() that was used previously, which only
supports DMU writes. The rationale for this change is to allow
zpl_putpage() to be notified when a ZIL commit is completed without
having to block on zil_commit() itself.
- zpl_writepages() now calls write_cache_pages in non-SYNC mode, which
will prevent (1) write_cache_pages from blocking, and (2) zpl_putpage
from issuing ZIL commits. zpl_writepages() will issue the commit
itself instead of relying on zpl_putpage() to do it, thus nicely
batching the writes. Note, however, that we still have to call
write_cache_pages() again in SYNC mode because there is an edge case
documented in the implementation of write_cache_pages() whereas it
will not give us all dirty pages when running in non-SYNC mode. Thus
we need to run it at least once in SYNC mode to make sure we honor
persistency guarantees. This only happens when the pages are
modified at the same time msync() is running, which should be rare.
In most cases there won't be any additional pages and this second
call will do nothing.
Note that this change also fixes a bug related to #907 whereas calling
msync() on pages that were already handed over to the DMU in a previous
writepages() call would make msync() block until the next TXG sync
instead of returning as soon as the ZIL commit is complete. The new
callback system fixes that problem.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1849Closes#907
This is a first draft of a spl-module-parameters(5) man page. I have
just extracted the parameter name and its description with modinfo,
then checked the source what type it is and its default value.
This will need more work, preferably someone that actually know these
values and what to use them for. Similar to zfsonlinux/zfs#1856, but
for the spl.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closeszfsonlinux/zfs#1856
Version 2.2.0.3-20 of dkms in the EPEL/Fedora repositories added the
necessary patches to support ZoL, Therefore, the zfs-dkms requirement
on dkms is set to match that version or higher. This allows us to
drop the custom dkms build in the ZoL EPEL/Fedora repositories.
References:
https://bugzilla.redhat.com/show_bug.cgi?id=1023598
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1873
Because ZFS bypasses the page cache we don't inherit per-task I/O
accounting for free. However, the Linux kernel does provide helper
functions allow us to perform our own accounting. These are most
commonly used for direct IO which also bypasses the page cache, but
they can be used for the common read/write call paths as well.
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#313Closes#1275
This is a first draft of a zfs-module-parameters(5) man page. I have
just extracted the parameter name and its description with modinfo,
then checked the source what type it is and its default value.
This will need more work, preferably someone that actually know these
values and what to use them for.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1856
On some platforms symbols provided by libzfs_core and used by
libzfs were not available to the linker. To avoid this issue
libzfs_core has been added to the list of required libraries
when building utilities which depend on libzfs. This should
have been handled properly by libtool and it's still not
entirely clear why it wasn't on all platforms.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1841
There's a missing semicolon and equals sign in the first hunk of this
commit in config/kernel-bdi.m4. This results in the test always
failing. The effects were noticed when rrdtool, a tool which modifies
files by mmap() and msync(), would have data never get saved to disk
in spite of the files working while the mounted filesystem remains
mounted.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1889
Under Linux this restriction does not apply because we have access
to all the required devices.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1631
Make zfs depend on the same version of zfs-kmod, rather than on same or
better. When yum repository contains a number of versions the dependency
resolution breaks on trying to install non-latest version.
Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1677
Properly initialize SELinux xattrs for all inode types. The
initial implementation accidentally only did this for files.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1832
During pool import stack overflows may still occur due to the
potentially deep recursion of traverse_visitbp(). This is most
likely to occur when additional layers are added to the block
device stack such as DM multipath. To minimize the stack usage
for this call path the following changes were made:
1) Added the keywork 'noinline' to the vdev_*_map_alloc() functions
to prevent them from being inlined by gcc. This reduced the
stack usage of vdev_raidz_io_start() from 208 to 128 bytes, and
vdev_mirror_io_start() from 144 to 128 bytes.
2) The 'saved_poolname' charater array in zfsdev_ioctl() was moved
from the stack to the heap. This reduced the stack usage of
zfsdev_ioctl() from 368 to 112 bytes.
3) The major saving came from slimming down traverse_visitbp() from
from 224 to 144 bytes. Since this function is called recursively
the 80 bytes saved per invokation adds up. The following changes
were made:
a) The 'hard' local variable was replaced by a TD_HARD() macro.
b) The 'pd' local variable was replaced by 'td->td_pfd' references.
c) The zbookmark_t was moved to the heap. This does cost us an
additional memory allocation per recursion by that cost should
still be minimal. The cost could be further reduced by adding
a dedicated zbookmark_t slab cache.
d) The variable declarations in 'if (BP_GET_LEVEL()) { }' were
restructured to use the minimum amount of stack. This includes
removing the 'cbp' local variable.
Overall for the offending use case roughly 1584 of total stack space
has been saved. This is enough to avoid overflowing the stack on
stock kernels with 8k stacks. See #1778 for additional details.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#1778
New versions of rpmbuild detect the invalid date which was added
incorrectly to the changelog. To silence this noise fix it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#306
Make spl depend on the same version of spl-kmod, rather than on same or
better. When yum repository contains a number of versions the dependency
resolution breaks on trying to install non-latest version.
Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closeszfsonlinux/zfs#1677
Commit 95fd54a1c5 restructured the
hold/release processing and moved some of the work into the sync task.
A number of nvlist allocations now need to use KM_PUSHPAGE.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1852Closes#1855
The Illumos #3875 patch reverted a part of ZoL's 7b3e34b which added
special-case error handling for zfs_rezget(). The error handling dealt
with the case in which an all-ones object number ended up being passed
to dnode_hold() and causing an EINVAL to be returned from zfs_rezget().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1859Closes#1861
Future proofing for compatibility with newer versions of Python.
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1838
Update the code to follow the pep8 style guide.
References:
http://www.python.org/dev/peps/pep-0008/
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1838
Commit 0cee240 from FreeBSD dramatically speeds up 'zfs list'
performance assuming you're only interested in the dataset
names. This optimization should be mentioned in the man page
to allow end users to take advantage of it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1847
The previous pattern could accidentally match on things like
'real_root=ZFS=node02-zp00/ROOT/rootfs' due to the 'ZFS=no'
substring.
Signed-off-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1837
In the current snapshot automount implementation, it is possible for
multiple mounts to attempted concurrently. Only one of the mounts will
succeed and the other will fail. The failed mounts will cause an EREMOTE
to be propagated back to the application.
This commit works around the problem by adding a new exit status,
MOUNT_BUSY to the mount.zfs program which is used when the underlying
mount(2) call returns EBUSY. The zfs code detects this condition and
treats it as if the mount had succeeded.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1819
torvalds/linux@24f7c6 introduced a new shrinker API while
torvalds/linux@a0b021 dropped support for the old shrinker API.
This patch adds support for the new shrinker API by wrapping
the old one with the new one.
This change also reorganizes the autotools checks on the shrinker
API such that the configure script will fail early if an unknown
API is encountered in the future.
Support for the set_shrinker() API which was used by Linux 2.6.22
and older has been dropped. As a general rule compatibility is
only maintained back to Linux 2.6.26.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/zfs#1732
Closes zfsonlinux/zfs#1822
Closes#293Closes#307
The required Posix ACL interfaces are only available for kernels
with CONFIG_FS_POSIX_ACL defined. Therefore, only enable Posix
ACL support for these kernels. All major distribution kernels
enable CONFIG_FS_POSIX_ACL by default.
If your kernel does not support Posix ACLs the following warning
will be printed at ZFS module load time.
"ZFS: Posix ACLs disabled by kernel"
Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1825
A couple of kmem_alloc() allocations were using KM_SLEEP in
the sync thread context. These were accidentally introduced
by the recent set of Illumos patches. The solution is to
switch to KM_PUSHPAGE.
dsl_dataset_promote_sync() -> promote_hold() -> snaplist_make() ->
kmem_alloc(sizeof (*snap), KM_SLEEP);
dsl_dataset_user_hold_sync() -> dsl_onexit_hold_cleanup() ->
kmem_alloc(sizeof (*ca), KM_SLEEP)
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
3995 Memory leak of compressed buffers in l2arc_write_done
References:
https://illumos.org/issues/3995
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1688
Issue #1775
4168 ztest assertion failure in dbuf_undirty
4169 verbatim import causes zdb to segfault
4170 zhack leaves pool in ACTIVE state
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/4168https://www.illumos.org/issues/4169https://www.illumos.org/issues/4170illumos/illumos-gate@7fdd916c47
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
4082 zfs receive gets EFBIG from dmu_tx_hold_free()
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/4082illumos/illumos-gate@5253393b09
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
4046 dsl_dataset_t ds_dir->dd_lock is highly contended
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/4046illumos/illumos-gate@b62969f868
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. This commit removed dsl_dataset_namelen in Illumos, but that
appears to have been removed from ZFSOnLinux in an earlier commit.
4047 panic from dbuf_free_range() from dmu_free_object() while
doing zfs receive
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/4047illumos/illumos-gate@713d6c2088
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. The exported symbol dmu_free_object() was renamed to
dmu_free_long_object() in Illumos.
3996 want a libzfs_core API to rollback to latest snapshot
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <andyjstormont@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3996illumos/illumos-gate@a7027df17f
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
3956 ::vdev -r should work with pipelines
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3956https://www.illumos.org/issues/3957https://www.illumos.org/issues/3958https://www.illumos.org/issues/3959https://www.illumos.org/issues/3960https://www.illumos.org/issues/3961https://www.illumos.org/issues/3962illumos/illumos-gate@b4952e17e8
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Porting notes:
1. zfs_dbgmsg_print() is only used in userland. Since we do not have
mdb on Linux, it does not make sense to make it available in the
kernel. This means that a build failure will occur if any future
kernel patch depends on it. However, that is unlikely given that
this functionality was added to support zdb.
2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels.
This preserves the existing behavior of minimal noise when running
with -V, and -VV.
3. In vdev_config_generate() the call to nvlist_alloc() was not
changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in
the txg_sync context.
3949 ztest fault injection should avoid resilvering devices
3950 ztest: deadman fires when we're doing a scan
3951 ztest hang when running dedup test
3952 ztest: ztest_reguid test and ztest_fault_inject don't place nice together
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3949https://www.illumos.org/issues/3950https://www.illumos.org/issues/3951https://www.illumos.org/issues/3952illumos/illumos-gate@2c1e2b4414
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
Porting notes:
1. The deadman thread was removed from ztest during the original
port because it depended on Solaris thr_create() interface.
This functionality should be reintroduced using the more
portable pthreads.
3973 zfs_ioc_rename alters passed in zc->zc_name
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3973illumos/illumos-gate@a0c1127b14
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
3909 "zfs send -D" does not work
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3909illumos/illumos-gate@36f7455d36
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
3834 incremental replication of 'holey' file systems is slow
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/3834illumos/illumos-gate@ca48f36f20
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
