The resilver restart test was reported as failing about 2% of the
time. Two issues were found:
- The event log wasn't large enough, so resilver events were missing
- One 'zpool sync' wasn't enough for resilver to start after zinject
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: John Poduska <jpoduska@datto.com>
Issue #9588Closes#9677Closes#9703
If a device is participating in an active resilver, then it will have a
non-empty DTL. Operations like vdev_{open,reopen,probe}() can cause the
resilver to be restarted (or deferred to be restarted later), which is
unnecessary if the DTL is still covered by the current scan range. This
is similar to the logic in vdev_dtl_should_excise() where the DTL can
only be excised if it's max txg is in the resilvered range.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: John Poduska <jpoduska@datto.com>
Issue #840Closes#9155Closes#9378Closes#9551Closes#9588
When qat_compress() fails to allocate the required contiguous memory
it mistakenly returns success. This prevents the fallback software
compression from taking over and (un)compressing the block.
Resolve the issue by correctly setting the local 'status' variable
on all exit paths. Furthermore, initialize it to CPA_STATUS_FAIL
to ensure qat_compress() always fails safe to guard against any
similar bugs in the future.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9784Closes#9788
The cleanup_devices function should remove any partitions created
on the device and force the partition table to be reread. This
is needed to ensure that blkid has an up to date version of what
devices and partitions are used by zfs.
The cleanup_devices call was removed from inuse_008_pos.ksh since
it operated on partitions instead of devices and was not needed.
Lastly ddidecode may be called by parted and was therefore added
to the constrained path.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9806
A change[1] was merged yesterday that should refer
to the zfs binary in the initramfs, but is actually
an unset shell variable.
This commit changes this line to call `zfs` directly
like the surrounding code.
[1]: cb5b875b273235a4a3ed28e16f416d5bb8865166
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Ben Cordero <bencord0@condi.me>
Closes#9780
The externally faulted vdev should be brought back online and have
its errors cleared before the pool is destroyed. Failure to do so
will leave a vdev with a valid active label. This vdev may then
not be used to create a new pool without the -f flag potentially
leading to subsequent test failures.
Additionally remove an unreachable log_pass from setup.ksh.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9777
Remove a few hardcoded instances of /var/tmp. This should use
the $TEST_BASE_DIR in order to allow the ZTS to be optionally
run in an alternate directory using `zfs-tests.sh -d <path>`.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9775
As of Python 3.5 the default behavior of json.tool was changed to
preserve the input order rather than lexical order. The test case
expects the output to be sorted so apply the --sort-keys option
to the json.tool command when using Python 3.5 and the option is
supported.
https://docs.python.org/3/library/json.html#module-json.tool
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9774
Update the devices_001_pos and devices_002_neg test cases such that the
special block device file created is backed by a ZFS volume. Specifying
a specific device allows the major and minor numbers to be easily
determined. Furthermore, this avoids the potentially dangerous behavior
of opening the first block device we happen to find under /dev/.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9773
- Skip invalid DVAs when importing pools in readonly mode
(in addition to when the config is untrusted).
- Upon encountering a DVA with a null VDEV, fail gracefully
instead of panicking with a NULL pointer dereference.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Steve Mokris <smokris@softpixel.com>
Closes#9022
If the encryption key is stored in a file, the initramfs should not
prompt for the password. For example, this could be the case if the boot
partition is stored on removable media that is only present at boot time
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Closes#9764
Rather than defining a new instance of 'aok' in every compilation
unit which includes this header, there is a single instance
defined in zone.c, and the header now only declares an extern.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Nick Black <dankamongmen@gmail.com>
Closes#9752
Any running 'zpool initialize' or TRIM must be cancelled prior
to the vdev_metaslab_fini() call in spa_vdev_remove_log() which
will unload the metaslabs and set ms->ms_group == NULL.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8602Closes#9751
* large_dnode_008_pos - Force a pool sync before invoking zdb to
ensure the updated dnode blocks have been persisted to disk.
* refreserv_raidz - Wait for the /dev/zvol links to be both created
and removed, this is important because the same device volume
names are being used repeatedly.
* btree_test - Add missing .gitignore file for btree_test binary.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9769
Increase the maximum supported kernel version to 5.4. This was
verified using the Fedora 5.4.2-300.fc31.x86_64 kernel.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9754Closes#9759
* devices_001_pos and devices_002_neg - Failing after FreeBSD ZTS
merged due to missing 'function' keyword for create_dev_file_linux.
* pool_state - Occasionally fails due to an insufficient delay
before checking 'zpool status'. Increasing the delay from 1 to 3
seconds resolved the issue in local testing.
* procfs_list_basic - Fails when run in-tree because the logged
command is actually 'lt-zfs'. Updated the regex accordingly.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9748
This change leverage module_param_call() to run arc_tuning_update()
immediately after the ARC tunable has been updated as suggested in
cffa837 code review.
A simple test case is added to the ZFS Test Suite to prevent future
regressions in functionality.
This is a backport of #9489 provided from:
https://github.com/zfsonlinux/zfs/pull/9776#issuecomment-569418370
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Move the 'nvh = (void *)buf' assignment after the 'buf == NULL'
check to resolve the warning. Interestingly, cppcheck 1.88
correctly determines that the existing code is safe, while
cppcheck 1.86 reports the warning.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
Suppress autoVariables warnings in the lua interpreter. The usage
here while unconventional in intentional and the same as upstream.
[module/lua/ldebug.c:327]: (error) Address of local auto-variable
assigned to a function parameter.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
As indicated by the VERIFY the local who_perm variable can never
be NULL in parse_fs_perm(). Due to the existence of the is_set
conditional, which is always true, cppcheck 1.88 was reporting
a possible NULL reference. Resolve the issue by removing the
extraneous is_set variable.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
The dnp argument can only be set to NULL when the DNODE_DRY_RUN flag
is set. In which case, an early return path will be executed and a
NULL pointer dereference at the given location is impossible. Add
an additional ASSERT to silence the cppcheck warning and document
that dbp must never be NULL at the point in the function.
[module/zfs/dnode.c:1566]: (warning) Possible null pointer deref: dnp
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
Resolve the reported memory leak by using a dedicated local vptr
variable to store the pointer reported by calloc(). Only assign the
passed **vtoc function argument on success, in all other cases vptr
is freed.
[lib/libefi/rdwr_efi.c:403]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:422]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:440]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:454]: (error) Memory leak: vtoc
[lib/libefi/rdwr_efi.c:470]: (error) Memory leak: vtoc
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
As of cppcheck 1.82 surpress the warning regarding shifting too many
bits for __divdi3() implemention. The algorithm used here is correct.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
As of cppcheck 1.82 warnings are issued when using the list_for_each_*
functions with an uninitialized variable. Functionally, this is fine
but to resolve the warning initialize these variables.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
Resolve the following uninitialized variable warnings. In practice
these were unreachable due to the goto. Replacing the goto with a
return resolves the warning and yields more readable code.
[module/icp/algs/modes/ccm.c:892]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/ccm.c:893]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/gcm.c:564]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:565]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:599]: (error) Uninitialized variable: gmac_param
[module/icp/algs/modes/gcm.c:600]: (error) Uninitialized variable: gmac_param
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9732
The existing rules miss nvme disk devices because of the trailing
digits in the KERNEL device name, e.g. nvme0n1. Partitions of nvme
disk devices are already properly handled by the existing rule for
ENV{DEVTYPE}=="partition".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Thomas Geppert <geppi@digitx.de>
Closes#9730
On systems that utilize TTY for password entry, if the kernel
option "quiet" is set, the system would appear to freeze on a
blank screen, when in fact it is waiting for password entry
from the user.
Since TTY is the fallback method, this has no effect on systemd
or plymouth password prompting.
By temporarily setting "printk" to "7", running the command,
then resuming with the original "printk" state, the user can
see the password prompt.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Garrett Fields <ghfields@gmail.com>
Closes#9731
From Steve Langasek <steve.langasek@canonical.com>:
> The poorly-named 'FRAMEBUFFER' option in initramfs-tools controls
> whether the console_setup and plymouth scripts are included and used
> in the initramfs. These are required for any initramfs which will be
> prompting for user input: console_setup because without it the user's
> configured keymap will not be set up, and plymouth because you are
> not guaranteed to have working video output in the initramfs without
> it (e.g. some nvidia+UEFI configurations with the default GRUB
> behavior).
> The zfs initramfs script may need to prompt the user for passphrases
> for encrypted zfs datasets, and we don't know definitively whether
> this is the case or not at the time the initramfs is constructed (and
> it's difficult to dynamically populate initramfs config variables
> anyway), therefore the zfs-initramfs package should just set
> FRAMEBUFFER=yes in a conf snippet the same way that the
> cryptsetup-initramfs package does
> (/usr/share/initramfs-tools/conf-hooks.d/cryptsetup).
https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1856408
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes#9723
Apply umask to `mode` which will eventually be applied to inode.
This is needed since VFS doesn't apply umask for O_TMPFILE files.
(Note that zpl_init_acl() applies `ip->i_mode &= ~current_umask();`
only when POSIX ACL is used.)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8997Closes#8998
Currently, 'zfs list' and 'zfs get' commands can be slow when
working with snapshots that have a ds_props_obj. This is
because the code that discovers all of the properties for these
snapshots needs to read this object for each snapshot, which
almost always ends up causing an extra random synchronous read
for each snapshot. This performance penalty exists even if the
properties on that snapshot have been unset because the object
is normally only freed when the snapshot is freed, even though
it is only created when it is needed.
This patch allows the user to regain 'zfs list' performance on
these snapshots by destroying the ds_props_obj when it no longer
has any entries left. In practice on a production machine, this
optimization seems to make 'zfs list' about 55% faster.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#9704
After spa_vdev_remove_aux() is called, the config nvlist is no longer
valid, as it's been replaced by the new one (with the specified device
removed). Therefore any pointers into the nvlist are no longer valid.
So we can't save the result of
`fnvlist_lookup_string(nv, ZPOOL_CONFIG_PATH)` (in vd_path) across the
call to spa_vdev_remove_aux().
Instead, use spa_strdup() to save a copy of the string before calling
spa_vdev_remove_aux.
Found by AddressSanitizer:
ERROR: AddressSanitizer: heap-use-after-free on address ...
READ of size 34 at 0x608000a1fcd0 thread T686
#0 0x7fe88b0c166d (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x5166d)
#1 0x7fe88a5acd6e in spa_strdup spa_misc.c:1447
#2 0x7fe88a688034 in spa_vdev_remove vdev_removal.c:2259
#3 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
#4 0x55ffbc769fba in ztest_execute ztest.c:6714
#5 0x55ffbc779a90 in ztest_thread ztest.c:6761
#6 0x7fe889cbc6da in start_thread
#7 0x7fe8899e588e in __clone
0x608000a1fcd0 is located 48 bytes inside of 88-byte region
freed by thread T686 here:
#0 0x7fe88b14e7b8 in __interceptor_free
#1 0x7fe88ae541c5 in nvlist_free nvpair.c:874
#2 0x7fe88ae543ba in nvpair_free nvpair.c:844
#3 0x7fe88ae57400 in nvlist_remove_nvpair nvpair.c:978
#4 0x7fe88a683c81 in spa_vdev_remove_aux vdev_removal.c:185
#5 0x7fe88a68857c in spa_vdev_remove vdev_removal.c:2221
#6 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
#7 0x55ffbc769fba in ztest_execute ztest.c:6714
#8 0x55ffbc779a90 in ztest_thread ztest.c:6761
#9 0x7fe889cbc6da in start_thread
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#9706
This interferes with zdb_read_block trying all the decompression
algorithms when the 'd' flag is specified, as some are
expected to fail. Also control the output when guessing
algorithms, try the more common compression types first, allow
specifying lsize/psize, and fix an uninitialized variable.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9612Closes#9630
This change allows us to align the code dump logic across platforms.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9691
Update the vdev_disk_open() retry logic to use a specified number
of milliseconds to be more robust. Additionally, on failure log
both the time waited and requested timeout to the internal log.
The default maximum allowed open retry time has been increased
from 500ms to 1000ms.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9680
Conflicts:
This sets send_realloc_files.ksh to use properties.shlib
(like the other compression related tests)
It was missing from #9645
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Issue #9645Closes#9679
arc_summary3 reports L2ARC hits and misses as Bytes, whereas they
should be reported as events. arc_summary2 reports these correctly.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#9669
The checksum display code of zdb_read_block uses a zio
to read in the block and then calls zio_checksum_compute.
Use a new zio in the call to zio_checksum_compute not the zio
from the read which has been destroyed by zio_wait.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9644Closes#9657
In case L2ARC read failed, l2arc_read_done() creates _different_ ZIO
to read data from the original storage device. Unfortunately pointer
to the failed ZIO remains in hdr->b_l1hdr.b_acb->acb_zio_head, and if
some other read try to bump the ZIO priority, it will crash.
The problem is reproducible by corrupting L2ARC content and reading
some data with prefetch if l2arc_noprefetch tunable is changed to 0.
With the default setting the issue is probably not reproducible now.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#9648
There may be circumstances where it's desirable that all blocks
in a specified dataset be stored on the special device. Relax
the artificial 128K limit and allow the special_small_blocks
property to be set up to 1M. When blocks >1MB have been enabled
via the zfs_max_recordsize module option, this limit is increased
accordingly.
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9131Closes#9355
Remove the specific gitignore rules for module left-overs and add a
generic one in modules/.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9656
Previously the generator would skip a dataset if it wasn't mountable by
'zfs mount -a' (legacy/none mountpoint, canmount off/noauto). This also
skipped the generation of key-load units for such datasets, breaking
the dependency handling for mountable child datasets.
Reviewed-by: Antonio Russo <antonio.e.russo@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes#9611
Systemd will ignore units that try to execute programs from non-absolute
paths. Use hardcoded /bin/sh instead.
Reviewed-by: Antonio Russo <antonio.e.russo@gmail.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
Closes#9611
The command line switch -A (ignore ASSERTs) has always been available
in zdb but was never connected up to the correct global variable.
There are times when you need zdb to ignore asserts and keep dumping
out whatever information it can get despite the ASSERT(s) failing.
It was always intended to be part of zdb but was incomplete.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#9610
As described in commit f81d5ef6 the zfs_vdev_elevator module
option is being removed. Users who require this functionality
should update their systems to set the disk scheduler using a
udev rule.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8664Closes#9417Closes#9609
