Update the CONTRIBUTING.md documentation to refer to the GitHub Actions
workflows which have replaced the buildbot infrastructure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16561
Switch from v2 to v3 CodeQL Actions. The v2 actions will no longer
be supported as of Dec '24 so we need to move to v3. According to
the release notes they should be functionally equivalent.
Note that the only difference between v2 and v3 of the CodeQL
Action is the node version they support, ... For example 3.22.11
was the first v3 release and is functionally identical to 2.22.11.
https://github.com/github/codeql-action/blob/main/CHANGELOG.md
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16560
Since the person using the kernel may not be the person who built it,
show a warning at module load too, in case they aren't aware that it
might be weird.
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15986
META lists the maximum kernel version we consider to be fully supported.
However, we don't enforce this.
Sometimes we ship experimental patches for a newer kernel than we're
ready to support or, less often, we compile just fine against a newer
kernel. Invariably, something doesn't quite work properly, and it's
difficult for users to understand that they're actually running against
a kernel that we're not yet ready to support.
This commit tries to improve this situation. First, it simply enforces
Linux-Maximum, by having configure bail out if you try to compile
against a newer version that.
Then, it adds the --enable-linux-experimental switch to configure. When
supplied, this disables enforcing the maximum version, allowing the user
to attempt to build against a kernel with version higher than
Linux-Maximum.
Finally, if the switch is supplied _and_ configure is run against a
higher kernel version, it shows a big warning message when configure
finishes, and defines HAVE_LINUX_EXPERIMENTAL for the build. This allows
us to add code to modify runtime behaviour as well.
Reviewed-by: Robert Evans <evansr@google.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#15986
It's the main recommendation to set xattr=sa
even in man pages, so let's set it by default.
xattr=sa don't use feature flag, so in the worst
case we'll have non-readable xattrs by other
non-openzfs platforms.
Non-overridden default `xattr` prop of existing pools
will automatically use `sa` after this commit too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#15147
Evidently while reworking it on aarch64, I broke it on x86 and
didn't notice.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#16556
The following tests have been observed to occasionally fail when
running under the CI. Updated our exceptions list to track them.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16553
All supported Linux kernels, 4.18 and newer, provide O_TMPFILE.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16553
There is no longer be a need for the ci_reason exception with
the update CI GitHub Actions infrastruture. Retire it.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16553
The qemu-9-summary-page.sh script reads the file env.txt in the
first lines. When the module didn't build, this file was not copied
into the tarfile - causing the scipt to abort.
Fix: copy needed files into the tarfile in case of module build
failures. The fix ignores also empty tarfiles in future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16555
At least FreeBSD has a limit of 256 simultaneous AIO requests per
process. Attempt to issue more results in EAGAIN errors. Since we
issue 4 requests per disk/partition from 2xCPUs threads, it is
quite easy to reach that limit on large systems, that results in
random pool import failures. It annoyed me for quite a while on
a system with 64 CPUs and 70+ partitioned disks.
This patch from one side limits the number of threads to avoid the
error, while from another should softly fall back to sync reads in
case of error. It takes into account _SC_AIO_MAX as a system-wide
AIO limit and _SC_AIO_LISTIO_MAX as a closest value to per-process
limit. The last not exactly right, but it is the best I found.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16551
GRUB is not able to detect ZFS pool if snaphsot of top level boot
pool is created. This issue is observed with GRUB versions up to
v2.06 if extensible_dataset feature is enabled on ZFS boot pool.
compatibility=grub2-2.06 would enable all read-only compatible
zpool features except extensible_dataset and other features that
depend on it.
The existing grub2 compatibility file is now renamed to grub2-2.12 to
reflect the appropriate grub2 version. grub2-2.12 lists all read-only
features that can be enabled on boot pool for grub2 with version 2.12
onwards.
A new symlink grub2 is created that currently points to the grub2-2.12
compatibility file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#13873Closes#15261Closes#15909
In zpool_create.shlib, check_feature_set iterates over all features
mentioned in provided compatibility file to check if only those
features are enabled on the pool.
This commit fixes skipping over comment lines correctly. Otherwise,
the test case fails as comment lines are also treated as feature names
by check_feature_set function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15909
I accidentally removed this in c22d56e3e, and didn't notice because it
doesn't fail the build, but does fail to load into the kernel because it
can't link it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16554
This change accidentally broke the FreeBSD build due to
a conflict between the simd_stat_init()/simd_stat_fini()
macros on FreeBSD and the extern function prototype.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16552
Too many times, people's performance problems have amounted to
"somehow your SIMD support isn't working", and determining that
at runtime is difficult to describe to people.
This adds a /proc/spl/kstat/zfs/simd node, which exposes
metadata about which instructions ZFS thinks it can use,
on AArch64 and x86_64 Linux, to make investigating things
like this much easier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#16530
This commit changes the workflow of the github actions.
- Ubuntu 20.04, 22.04, 24.04 will be tested via QEMU now
- remove unused scripts of this commit: b7bc334d1
- re-add the zloop standalone testings via zloop.yml
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16549
Fix that error: "cat /tmp/failed.txt: No such file or directory"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16549
On compression we could be more explicit here for cases
where we can not recompress the data.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#9416
ZLE compressor needs additional bytes to process
d_len argument efficiently.
Don't use BPE_PAYLOAD_SIZE as d_len with it
before we rework zle compressor somehow.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#9416
Now default compression is lz4, which can stop
compression process by itself on incompressible data.
If there are additional size checks -
we will only make our compressratio worse.
New usable compression thresholds are:
- less than BPE_PAYLOAD_SIZE (embedded_data feature);
- at least one saved sector.
Old 12.5% threshold is left to minimize affect
on existing user expectations of CPU utilization.
If data wasn't compressed - it will be saved as
ZIO_COMPRESS_OFF, so if we really need to recompress
data without ashift info and check anything -
we can just compress it with zero threshold.
So, we don't need a new feature flag here!
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#9416
On larger files this should improve the speed.
Sample values of my system:
[mcmilk@xz]$ time dd if=/dev/zero bs=128k count=1k | sha256sum
254bcc3fc4f27172636df4bf32de9f107f620d559b20d760197e452b97453917 -
real 0m1,050s
user 0m0,985s
sys 0m0,153s
[mcmilk@xz]$ time dd if=/dev/zero bs=128k count=1k | openssl sha256 -r
254bcc3fc4f27172636df4bf32de9f107f620d559b20d760197e452b97453917 *stdin
real 0m0,254s
user 0m0,206s
sys 0m0,160s
I think cli_root/zdb/zdb_backup.ksh runs also an FreeBSD and I needed to
include the sysutils/coreutils package for the FreeBSD tests within the
QEMU patchset.
This could be reverted, when this pull request gets upstream
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16543
Just nice and simple, with room to grow.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16492
For now, userspace has no znode implementation. Some of the property and
path handling code is used there though and is the same on all
platforms, so we only need a single copy of it.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16492
The no-op is fine for both.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16492
It does nothing in userspace anyway.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16492
The no-op is fine for both.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16492
The Linux arc_os.c carries userspace and kernel code, with very little
overlap between the two. This lifts the userspace parts out into a
separate arc_os.c for libzpool and removes it from the Linux side.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16492
All kernels we support have compound pages that work the way we would
like. However, this code is new and this knowledge was hard won, so I'd
like to leave the description and option there for a little while, even
if it can only be disabled with a recompile.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16545
Following 2b069768a (#16479), anything gated on a kernel version before
4.18 can be always included/excluded.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16545
So that we can get actual benefit from last commit.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16131Closes#16483
Specializing cityhash4 on 32-bit architectures can reduce the size
of stack frames as well as instruction count. This is a tiny but
useful optimization, since some callers invoke it frequently.
When specializing into 1/2/3/4-arg versions, the stack usage
(in bytes) on some 32-bit arches are listed as follows:
- x86: 32, 32, 32, 40
- arm-v7a: 20, 20, 28, 36
- riscv: 0, 0, 0, 16
- power: 16, 16, 16, 32
- mipsel: 8, 8, 8, 24
And each actual argument (even if passing 0) contributes evenly
to the number of multiplication instructions generated:
- x86: 9, 12, 15 ,18
- arm-v7a: 6, 8, 10, 12
- riscv / power: 12, 18, 20, 24
- mipsel: 9, 12, 15, 19
On 64-bit architectures, the tendencies are similar. But both stack
sizes and instruction counts are significantly smaller thus negligible.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16131Closes#16483
As mentioned in PR #16131, replacing CRC-based hash with cityhash4
could slightly improve the performance by eliminating memory access.
Replacing algorightm is safe since the hash result is not persisted.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16131Closes#16483
Add ARC structural breakdown, ARC types breakdown, ARC states
breakdown similar to arc_summary. Additional cleanups included.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Theera K. <tkittich@hotmail.com>
Closes#16509
When multiple drives are throwing errors, it is likely not
a drive failing but rather a failure above the drives, like
a controller. The active cases context of the drive's peers
is now considered when making a diagnosis.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16531
FreeBSD 14 gained a `VOP_DEALLOCATE` VFS operation and a `fspacectl`
syscall to use it. At minimum, these zero the given region, and if the
underlying filesystem supports it, can make the region sparse. We can
use this to get TRIM-like behaviour for file vdevs.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16496
We only use it on a specific way: to punch a hole in (make sparse) a
region of a file, in order to implement TRIM-like behaviour.
So, call the op "deallocate", and move the Linux-style mode flags down
into the Linux implementation, since they're an implementation detail.
FreeBSD gets a no-op stub (for the moment).
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16496
It always failed from "unused variable" warnings-errors. The resulting
`#define page_mapping(...)` happend to work because it always overrode
the kernel's function prototype, but that's brittle.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16479
get_user_pages_unlocked() had stabilised by 4.9.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16479
