Commit Graph

1496 Commits

Author SHA1 Message Date
Isaac Huang
0bb89b6c59 sighandler() should take 2 arguments
Stopping arcstat.py with ^C always ends up with error:

  TypeError: sighandler() takes no arguments (2 given)

This patch corrects the error by updating the signal handler
to take the correct number of arguments.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2182
2014-03-12 09:00:18 -07:00
Isaac Huang
4e1c9f9c48 Make arcstat.py default to one header per screen
Today arcstat.py prints one header every hdr_intr (20 by default)
lines. It would be more consistent with out utilities like vmstat
if hdr_intr defaulted to terminal window size, i.e.  one header
per screenful of outputs.

Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2183
2014-03-12 08:56:12 -07:00
Turbo Fredriksson
4e26f2fccd Fix NAME section of manpages zhack and fsck.zfs.
In Debian GNU/Linux a program called 'linitian' is used to make sure
that packages conforms to the Debian GNU/Linux packaging guide lines.
This fixes the problem reported as:

     W: zfsutils: manpage-has-bad-whatis-entry usr/share/man/man1/zhack.1.gz
     W: zfsutils: manpage-has-bad-whatis-entry usr/share/man/man8/fsck.zfs.8.gz

Not something that ZoL needs to addhere to, but every other man page
have their NAME section in a special way - why not these two as well?

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2161
2014-03-10 09:19:17 -07:00
Boris Protopopov
47fe91b54c Illumos #4088 use after free in arc_release()
4088 use after free in arc_release()

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@nexenta.com>

References:
  https://www.illumos.org/issues/4088
  illumos/illumos-gate@ccc22e1304

From the illumos issue:

A race-induced use after free occurs in arc_release() where the
ARC header is used outside the critical section protected by the
hash_lock.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #2162
2014-03-10 09:11:15 -07:00
Tim Chase
a45fc6a677 Use KM_PUSHPAGE in spa_add() for spa_label_features.
The spa_label_features nvlist is used in the sync context during pool
version upgrade.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2168
2014-03-10 09:09:30 -07:00
Brian Behlendorf
e74400155f Export symbols dsl_sync_task{_nowait}
These are needed by consumers (i.e. Lustre) who wish to perform a
callback in the syncing context.  Both a blocking and non-blocking
version are available to callers.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-03-07 10:01:36 -08:00
Ned Bass
a77c4c8332 Improve reporting of tx assignment wait times
Some callers of dmu_tx_assign() use the TXG_NOWAIT flag and call
dmu_tx_wait() themselves before retrying if the assignment fails.
The wait times for such callers are not accounted for in the
dmu_tx_assign kstat histogram, because the histogram only records
time spent in dmu_tx_assign().  This change moves the histogram
update to dmu_tx_wait() to properly account for all time spent there.

One downside of this approach is that it is possible to call
dmu_tx_wait() multiple times before successfully assigning a
transaction, in which case the cumulative wait time would not be
recorded.  However, this case should not often arise in practice,
because most callers currently use one of these forms:

  dmu_tx_assign(tx, TXG_WAIT);
  dmu_tx_assign(tx, waited ?  TXG_WAITED : TXG_NOWAIT);

The first form should make just one call to dmu_tx_delay() inside of
dmu_tx_assign(). The second form retries with TXG_WAITED if the first
assignment fails and incurs a delay, in which case no further waiting
is performed.  Therefore transaction delays normally occur in one
call to dmu_tx_wait() so the histogram should be fairly accurate.

Another possible downside of this approach is that the histogram will
no longer record overhead outside of dmu_tx_wait() such as in
dmu_tx_try_assign(). While I'm not aware of any reason for concern on
this point, it is conceivable that lock contention, long list
traversal, etc. could cause assignment delays that would not be
reflected in the histogram.  Therefore the histogram should strictly
be used for visibility in to the normal delay mechanisms and not as a
profiling tool for code performance.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1915
2014-03-04 12:22:24 -08:00
Ned Bass
3ccab25205 replace nreserved with ndirty in txgs kstat
The nreserved column in the txgs kstat file always contains 0
following the write throttle restructuring of commit
e8b96c6007.

Prior to that commit, the nreserved column showed the number of bytes
temporarily reserved in the pool by a transaction group at sync time.
The new write throttle did away with temporary reservations and uses
the amount of dirty data instead.  To approximate the old output of
the txgs kstat, the number of dirty bytes per-txg was passed in as
the nreserved value to spa_txg_history_set_io().  This approach did
not work as intended, because the per-txg dirty value is decremented
as data is written out to disk, so it is zero by the time we call
spa_txg_history_set_io().  To fix this, save the number of dirty
bytes before calling spa_sync(), and pass this value in to
spa_txg_history_set_io().

Also, since the name "nreserved" is now a misnomer, the column
heading is now labeled "ndirty".

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1696
2014-03-04 12:22:24 -08:00
Ned Bass
3d920a1567 dmu_tx kstat cleanup
A few counters in the dmu_tx kstats are obsolete or no longer
bumped properly.

- The sync task restructuring commit
  13fe019870 removed the code
  that bumpted dmu_tx_quota. The counter is now bumped in two
  cases, instead of just the one case as before (after the result
  of dsl_dataset_check_quota call). The second case is where
  we check the requested reservation against the actual pool size,
  as this is an implicit quota of sorts.

- The write throttle restructuring commit
  e8b96c6007 makes dmu_tx_how and
  dmu_tx_inflight obsolete, so they are removed.

Signed-off-by: Kohsuke Kawaguchi <kk@kohsuke.org>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1914
2014-03-04 12:22:24 -08:00
Richard Yao
cecb7487fc Invalidate Linux buffer cache on vdevs upon each flush
Userland tools such as blkid, grub2-probe and zdb will go through the
buffer cache. However, ZFS uses on submit_bio() to bypass the buffer
cache when performing IO operations on vdevs for efficiency purposes.
This permits the on-disk state and buffer cache to fall out of
synchronization. That causes seemingly random failures when tools
reading stale metadata from the buffer cache try to access references to
data that is no longer there.

A particularly bad failure this causes involves grub2-probe, which is
used by grub2-mkconfig. Ordinarily, a rootfs might be called
rpool/ROOT/gentoo. However, when a failure occurs in grub2-probe,
grub2-mkconfig will generate a configuration file containing
/ROOT/gentoo, which omits the pool name and causes a boot failure.

This is avoidable by calling invalidate_bdev() on each flush, which is a
simple way to ensure that all non-dirty pages are wiped. Since userland
tools rarely access vdevs directly, this should be a fancy noop >99.999%
of the time and have little impact on IO. We could have tried a finer
grained approach for the rare instances in which the vdevs are accessed
frequently by userland. However, that would require consideration of
corner cases and it is not worth the effort.

Memory-wise, it would have been better to use a Linux kernel API hook to
disable the buffer cache on such devices, but it provides us no way of
doing that, so we opt for this approach instead. We should revisit that
idea in the future when higher priority issues have been tackled.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2150
2014-03-04 12:22:03 -08:00
Richard Yao
b42b812efb Inform OpenRC that ZFS uses mtab
p_l in #zfsonlinux reported that he had issues mounting filesystems that
were resolved by adding rc_need="mtab" to /etc/init.d/zfs. Closer
inspection revealed that we do have a race, but it is not clear how this
race caused mounting to fail. What is clear is that this race should be
fixed, so lets add the proper `use mtab` line to handle it.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2148
2014-03-04 11:54:44 -08:00
Alexander Stetsenko
36f92e93e5 Illumos #4574 get_clones_stat does not call zap_count in non-debug kernel
4574 get_clones_stat does not call zap_count in non-debug kernel

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Marcel Telka <marcel@telka.sk>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/4574
  illumos/illumos-gate@03d1795fa6

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2147
2014-03-04 11:50:13 -08:00
Tim Chase
13a7ba1c2c Fix zap_lookup() in feature_is_supported().
The length (number of integers) argument passed to zap_lookup was wrong;
likely as a result of performing stack-reduction on the function.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2141
2014-03-04 11:44:44 -08:00
cburroughs
e78b6da3d0 Include l2asize in arcstat
For consistency with upstream pull in the l2asize update after
reworking it from Perl to Python.

References:
  https://github.com/mharsch/arcstat/pull/11
  https://github.com/mharsch/arcstat/pull/12

Signed-off-by: cburroughs <chris.burroughs@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2122
2014-03-04 11:25:58 -08:00
Andrew Barnes
1ba1615925 Remove recursion from dsl_dir_willuse_space()
Remove recursion from dsl_dir_willuse_space() to reduce stack usage.
Issues with stack overflow were observed in zfs recv of zvols,
likelihood of an overflow is proportional to the depth of the dataset
as dsl_dir_willuse_space() recurses to parent datasets.

Signed-off-by: Andrew Barnes <barnes333@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2069
2014-03-04 11:22:27 -08:00
Brian Behlendorf
0ad85ed91e Merge branch 'arc-changes'
This stack of patches has been empirically shown to drastically improve
the hit rate of the ARC for certain workloads. As a result, fewer reads
to disk are required, which is generally a good thing and can
drastically improve performance if the workload is disk limited.

For the impatient, I'll summarize the results of the tests performed:

    * Test 1 - Creating many empty directories. This test saw 99.9%
               fewer reads and 12.8% more inodes created when running
               *with* these changes.

    * Test 2 - Creating many empty files. This test saw 4% fewer reads
               and 0% more inodes created when running *with* these
               changes.

    * Test 3 - Creating many 4 KiB files. This test saw 96.7% fewer
               reads and 4.9% more inodes created when running *with*
               these changes.

    * Test 4 - Creating many 4096 KiB files. This test saw 99.4% fewer
               reads and 0% more inodes created (but took 6.9% fewer
               seconds to complete) when running *with* these changes.

    * Test 5 - Rsync'ing a dataset with many empty directories. This
               test saw 36.2% fewer reads and 66.2% more inodes created
               when running *with* these changes.

    * Test 6 - Rsync'ing a dataset with many empty files. This test saw
               30.9% fewer reads and 0% more inodes created (but took
               24.3% fewer seconds to complete) when running *with*
               these changes.

    * Test 7 - Rsync'ing a dataset with many 4 KiB files. This test saw
               30.8% fewer reads and 173.3% more inodes created when
               running *with* these changes.

For the patient, the following consists of more a more detailed
description of the tests performed and the results gathered.

All the tests were run using identical machines, each with a pool
consisting of 5 mirror pairs with 2TB 7200 RPM disks. Each test was run
twice, once *without* this set of patches and again *with* this set of
patches to highlight the performance changes introduced. The first four
workloads tested were:

    ** NOTE: None of these tests were run to completion. They ran for a
             set amount of time and then were terminated or hit ENOSPC.

    1. Creating many empty directories:

       * fdtree -d 10 -l 8 -s 0 -f 0 -C
         -> 111,111,111 Directories
         ->           0 Files
         ->           0 KiB File Data

    2. Creating many empty files:

       * fdtree -d 10 -l 5 -s 0 -f 10000 -C
         ->       111,111 Directories
         -> 1,111,110,000 Files
         ->             0 KiB File Data

    3. Creating many 4 KiB files:

       * fdtree -d 10 -l 5 -s 1 -f 10000 -C
         ->       111,111 Directories
         -> 1,111,110,000 Files
         -> 4,444,440,000 KiB File Data

    4. Creating many 4096 KiB files:

       * fdtree -d 10 -l 5 -s 1024 -f 10000 -C
         ->           111,111 Directories
         ->     1,111,110,000 Files
         -> 4,551,106,560,000 KiB File Data

Results for these first four tests are below:

                  | Time (s) |   inodes |  reads |    writes |
                --+----------+----------+--------+-----------+
    Test 1 Before |    65069 | 37845363 | 831975 |   3214646 |
    Test 1 After  |    65069 | 42703608 |    778 |   3327674 |
                --+----------+----------+--------+-----------+
    Test 2 Before |    65073 | 54257583 | 208647 |   2413056 |
    Test 2 After  |    65069 | 54255782 | 200038 |   2533759 |
                --+----------+----------+--------+-----------+
    Test 3 Before |    65068 | 49857744 | 487130 |   5533348 |
    Test 3 After  |    65071 | 52294311 |  16078 |   5648354 |
                --+----------+----------+--------+-----------+
    Test 4 Before |    34854 |  2448329 | 385870 | 162116572 |
    Test 4 After  |    32419 |  2448329 |   2339 | 162175706 |
                --+----------+----------+--------+-----------+

    * "Time (s)" - The run time of the test in seconds
    * "inodes"   - The number of inodes created by the test
    * "reads"    - The number of reads performed by the test
    * "writes"   - The number of writes performed by the test

As you can see from the table above, running with this patch stack
*significantly* reduced the number of reads performed in 3 out of the 4
tests (due to an improved ARC hit rate).

In addition to the tests described above, which specifically targeted
creates only, three other workloads were tested. These additional tests
were targeting rsync performance against the datasets created in the
previous tests. A brief description of the workloads and results for
these tests are below:

    ** NOTE: Aside from (6), these tests didn't run to completion. They
             ran for a set amount of time and then were terminated.

    5. Rsync the dataset created in Test 1 to a new dataset:

       * rsync -a /tank/test-1 /tank/test-5

    6. Rsync the dataset created in Test 2 to a new dataset:

       * rsync -a /tank/test-2 /tank/test-6

    7. Rsync the dataset created in Test 3 to a new dataset:

       * rsync -a /tank/test-3 /tank/test-7

Results for Test 5, 6, and 7 are below:

                  | Time (s) |   inodes |    reads |  writes |
                --+----------+----------+----------+---------+
    Test 5 Before |    93041 | 17921014 | 47632823 | 4094848 |
    Test 5 After  |    93029 | 29785847 | 30376206 | 4484459 |
                --+----------+----------+----------+---------+
    Test 6 Before |    15290 | 54264474 |  6018331 |  733087 |
    Test 6 After  |    11573 | 54260826 |  4155661 |  617285 |
                --+----------+----------+----------+---------+
    Test 7 Before |    93057 | 10093749 | 41561635 | 3659098 |
    Test 7 After  |    93045 | 27587043 | 28773151 | 5612234 |
                --+----------+----------+----------+---------+

    * "Time (s)" - The run time of the test in seconds
    * "inodes"   - The number of inodes created by the test
    * "reads"    - The number of reads performed by the test
    * "writes"   - The number of writes performed by the test

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2110
2014-02-21 16:14:57 -08:00
Prakash Surya
2b13331d62 Set "arc_meta_limit" to 3/4 arc_c_max by default
Unfortunately, this change is an cheap attempt to work around a
pathological workload for the ARC. A "real" solution still needs to be
fleshed out, so this patch is intended to alleviate the situation in the
meantime. Let me try and describe the problem..

Data buffers residing in the dbuf hash table (dbuf cache) will keep a
hold on their respective dnode, this dnode will in turn keep a hold on
its backing dbuf (the physical block of the dnode object backing it).
Since the dnode has a hold on its backing dbuf, the arc buffer for this
dbuf is unevictable. What this essentially boils down to, "data" buffers
have the potential to pin "metadata" in the arc (as a result of these
dnode object buffers being unevictable).

This scenario becomes a real problem when the workload consists of many
small files (e.g. creating millions of 4K files). With this workload,
the arc's "arc_meta_used" space get filled up with buffers for any
resident directories as well as buffers for the objset's dnode object.
Once the "arc_meta_limit" is reached, the directory buffers will be
evicted and only the unevictable dnode object buffers will reside. If
the workload is simply creating new small files, these dnode object
buffers will never even be needed again, whereas the directory buffers
will be used constantly until the creates move to a new directory.

If "arc_c" and "arc_meta_limit" are sized appropriately, this
situation wont occur. This is because as the data buffers accumulate,
"arc_size" will eventually approach "arc_c" (before "arc_meta_used"
reaches "arc_meta_limit"); at that point the data buffers will be
evicted, which releases the hold on the dnode, which releases the hold
on the dnode object's dbuf, which allows that buffer to be evicted from
the arc in preference to more "useful" metadata.

So, to side step the issue, we simply need to ensure "arc_size" reaches
"arc_c" before "arc_meta_used" reaches "arc_meta_limit". In order to
pick a proper limit, we have to do some math.

To make things a little easier to follow, it is assumed that there will
only be a single data buffer per file (which is probably always the case
for "small" files anyways).

Based on the current internals of the arc, if N files residing in the
dbuf cache all pin a single dnode buffer (i.e. their dnodes all share
the same physical dnode object block), then the following amount of
"arc_meta_used" space will be consumed:

    - 16K for the dnode object's block - [        16384 bytes]
    - N * sizeof(dnode_t) -------------- [      N * 928 bytes]
    - (N + 1) * sizeof(arc_buf_t) ------ [(N + 1) *  72 bytes]
    - (N + 1) * sizeof(arc_buf_hdr_t) -- [(N + 1) * 264 bytes]
    - (N + 1) * sizeof(dmu_buf_impl_t) - [(N + 1) * 280 bytes]

To simplify, these N files will pin the following amount of
"arc_meta_used" space as unevictable:

    Pinned "arc_meta_used" bytes = 16384 + N * 928 + (N + 1) * (72 + 264 + 280)
    Pinned "arc_meta_used" bytes = 17000 + N * 1544

This pinned space is regardless of the size of the files, and is only
dependent on the number of pinned dnodes sharing a physical block
(i.e. N). For example, 32 512b files sharing a single dnode object
block would consume the same "arc_meta_used" space as 32 4K files
sharing a single dnode object block.

Now, given a files size of S, we can determine the total amount of
space that will be consumed in the arc:

    Total = 17000 + N * 1544 + S * N
            ^^^^^^^^^^^^^^^^   ^^^^^
                metadata        data

So, given these formulas, we can generate a table which states the ratio
of pinned metadata to total arc (meta + data) using different values of
N (number of pinned dnodes per pinned physical dnode block) and S (size
of the file).

                                  File Sizes (S)
       |    512   |   1024   |   2048   |   4096   |   8192   |   16384  |
    ---+----------+----------+----------+----------+----------+----------+
     1 | 0.973132 | 0.947670 | 0.900544 | 0.819081 | 0.693597 | 0.530921 |
     2 | 0.951497 | 0.907481 | 0.830632 | 0.710325 | 0.550779 | 0.380051 |
 N   4 | 0.918807 | 0.849809 | 0.738842 | 0.585844 | 0.414271 | 0.261250 |
     8 | 0.877541 | 0.781803 | 0.641770 | 0.472505 | 0.309333 | 0.182965 |
    16 | 0.835819 | 0.717945 | 0.559996 | 0.388885 | 0.241376 | 0.137253 |
    32 | 0.802106 | 0.669597 | 0.503304 | 0.336277 | 0.202123 | 0.112423 |

As you can see, if we wanted to support the absolute worst case of 1
dnode per physical dnode block and 512b files, we would have to set the
"arc_meta_limit" to something greater than 97.3132% of "arc_c_max". At
that point, it essentially defeats the purpose of having an
"arc_meta_limit" at all.

This patch changes the default value of "arc_meta_limit" to be 75% of
"arc_c_max", which should be good enough for "most" workloads (I think).

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
cc7f677c16 Split "data_size" into "meta" and "data"
Previously, the "data_size" field in the arcstats kstat contained the
amount of cached "metadata" and "data" in the ARC. The problem is this
then made it difficult to extract out just the "metadata" size, or just
the "data" size.

To make it easier to distinguish the two values, "data_size" has been
modified to count only buffers of type ARC_BUFC_DATA, and "meta_size"
was added to count only buffers of type ARC_BUFC_METADATA. If one wants
the old "data_size" value, simply sum the new "data_size" and
"meta_size" values.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
da8ccd0ee0 Prioritize "metadata" in arc_get_data_buf
When the arc is at it's size limit and a new buffer is added, data will
be evicted (or recycled) from the arc to make room for this new buffer.
As far as I can tell, this is to try and keep the arc from over stepping
it's bounds (i.e. keep it below the size limitation placed on it).

This makes sense conceptually, but there appears to be a subtle flaw in
its current implementation, resulting in metadata buffers being
throttled. When it evicts from the arc's lists, it also passes in a
"type" so as to remove a buffer of the same type that it is adding. The
problem with this is that once the size limit is hit, the ratio of
"metadata" to "data" contained in the arc essentially becomes fixed.

For example, consider the following scenario:

    * the size of the arc is capped at 10G
    * the meta_limit is capped at 4G
    * 9G of the arc contains "data"
    * 1G of the arc contains "metadata"

Now, every time a new "metadata" buffer is created and added to the arc,
an older "metadata" buffer(s) will be removed from the arc; preserving
the 9G "data" to 1G "metadata" ratio that was in-place when the size
limit was reached. This occurs even though the amount of "metadata" is
far below the "metadata" limit. This can result in the arc behaving
pathologically for certain workloads.

To fix this, the arc_get_data_buf function was modified to evict "data"
from the arc even when adding a "metadata" buffer; unless it's at the
"metadata" limit. In addition, arc_evict now more closely resembles
arc_evict_ghost; such that when evicting "data" from the arc, it may
make a second pass over the arc lists and evict "metadata" if it cannot
meet the eviction size the first time around.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
77765b540b Remove "arc_meta_used" from arc_adjust calculation
Using "arc_meta_used" to determine if the arc's mru list is over it's
target value of "arc_p" doesn't seem correct. The size of the mru list
and the value of "arc_meta_used", although related, are completely
independent. Buffers contained in "arc_meta_used" may not even be
contained in the arc's mru list. As such, this patch removes
"arc_meta_used" from the calculation in arc_adjust.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
94520ca462 Prune metadata from ghost lists in arc_adjust_meta
To maintain a strict limit on the metadata contained in the arc, while
preventing the arc buffer headers from completely consuming the
"arc_meta_used" space, we need to evict metadata buffers from the arc's
ghost lists along with the regular lists.

This change modifies arc_adjust_meta such that it more closely models
the adjustments made in arc_adjust. "arc_meta_used" is used similarly to
"arc_size", and "arc_meta_limit" is used similarly to "arc_c".

Testing metadata intensive workloads (e.g. creating, copying, and
removing millions of small files and/or directories) has shown this
change to make a dramatic improvement to the hit rate maintained in the
arc. While I think there is still room for improvement, this is a big
step in the right direction.

In addition, zpl_free_cached_objects was made into a no-op as I'm not
yet sure how to properly implement that function.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
1e3cb67b53 Revert "Return -1 from arc_shrinker_func()"
This reverts commit c11a12bc3b.

Out of memory events were fixed by reverting this patch.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
624227854e Disable arc_p adapt dampener by default
It's unclear why adjustments to arc_p need to be dampened as they are in
arc_adjust. With that said, it's removal significantly improves the arc's
ability to "warm up" to a given workload. Thus, I'm disabling by default
until its usefulness is better understood.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:49 -08:00
Prakash Surya
f521ce1b9c Allow "arc_p" to drop to zero or grow to "arc_c"
Setting a limit on the minimum value of "arc_p" has been shown to have
detrimental effects on the arc hit rate for certain "metadata" intensive
workloads. Specifically, this has been exhibited with a workload that
constantly dirties new "metadata" but also frequently touches a "small"
amount of mfu data (e.g. mkdir's).

What is seen is that the new anon data throttles the mfu list to a
negligible size (because arc_p > anon + mru in arc_get_data_buf), even
though the mfu ghost list receives a constant stream of hits. To remedy
this, arc_p is now allowed to drop to zero if the algorithm deems it
necessary.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 16:10:27 -08:00
Prakash Surya
89c8cac493 Disable aggressive arc_p growth by default
For specific workloads consisting mainly of mfu data and new anon data
buffers, the aggressive growth of arc_p found in the arc_get_data_buf()
function can have detrimental effects on the mfu list size and ghost
list hit rate.

Running a workload consisting of two processes:

    * Process 1 is creating many small files
    * Process 2 is tar'ing a directory consisting of many small files

I've seen arc_p and the mru grow to their maximum size, while the mru
ghost list receives 100K times fewer hits than the mfu ghost list.

Ideally, as the mfu ghost list receives hits, arc_p should be driven
down and the size of the mfu should increase. Given the specific
workload I was testing with, the mfu list size should grow to a point
where almost no mfu ghost list hits would occur. Unfortunately, this
does not happen because the newly dirtied anon buffers constancy drive
arc_p to its maximum value and keep it there (effectively prioritizing
the mru list and starving the mfu list down to a negligible size).

The logic to increment arc_p from within the arc_get_data_buf() function
was introduced many years ago in this upstream commit:

    commit 641fbdae3a027d12b3c3dcd18927ccafae6d58bc
    Author: maybee <none@none>
    Date:   Wed Dec 20 15:46:12 2006 -0800

        6505658 target MRU size (arc.p) needs to be adjusted more aggressively

and since I don't fully understand the motivation for the change, I am
reluctant to completely remove it.

As a way to test out how it's removal might affect performance, I've
disabled that code by default, but left it tunable via a module option.
Thus, if its removal is found to be grossly detrimental for certain
workloads, it can be re-enabled on the fly, without a code change.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 14:53:28 -08:00
Prakash Surya
39e055c44b Adjust arc_p based on "bytes" in arc_shrink
In an attempt to prevent arc_c from collapsing "too fast", the
arc_shrink() function was updated to take a "bytes" parameter by this
change:

    commit 302f753f16
    Author: Brian Behlendorf <behlendorf1@llnl.gov>
    Date:   Tue Mar 13 14:29:16 2012 -0700

        Integrate ARC more tightly with Linux

Unfortunately, that change failed to make a similar change to the way
that arc_p was updated. So, there still exists the possibility for arc_p
to collapse to near 0 when the kernel start calling the arc's shrinkers.

This change attempts to fix this, by decrementing arc_p by the "bytes"
parameter in the same way that arc_c is updated.

In addition, a minimum value of arc_p is attempted to be maintained,
similar to the way a minimum arc_p value is maintained in arc_adapt().

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2110
2014-02-21 14:53:08 -08:00
Brian Behlendorf
9141582592 Set zfs_arc_min to 4MB
Decrease the mimimum ARC size from 1/32 of total system memory
(or 64MB) to a much smaller 4MB.

1) Large systems with over a 1TB of memory are being deployed
   and reserving 1/32 of this memory (32GB) as the mimimum
   requirement is overkill.

2) Tiny systems like the raspberry pi may only have 256MB of
   memory in which case 64MB is far too large.

The ARC should be reclaimable if the VFS determines it needs
the memory for some other purpose.  If you want to ensure the
ARC is never completely reclaimed due to memory pressure you
may still set a larger value with zfs_arc_min.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Issue #2110
2014-02-21 14:52:02 -08:00
Brian Behlendorf
3965d2e6ee Merge branch 'issue-2094'
This patch stack was designed to accomplish the following:

* Cleanly address the pool incompatibility which was accidentally
  introduced post-0.6.2 but pre-0.6.3.  This required adding
  infrastructure which can be used from now on to notify system
  administrators of errata which affect their pool.

* Add additional automated regression testing to ensure this type
  of compatibility issue is caught prior to the change being merged.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2094
2014-02-21 12:20:46 -08:00
Richard Yao
4f2dcb3eee Add erratum for issue #2094
ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit.  Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.

The additional field has been removed by the previous commit.  However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied.  This will return the pools to a state in which they
may be imported by other implementations.

The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted.  A message similar to one of the following means your
pool must be scrubbed to restore compatibility.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #1 detected.
 action: The pool can be imported using its name or numeric identifier,
         however there is a compatibility issue which should be corrected
         by running 'zpool scrub'
    see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

$ zpool status
  pool: zol-0.6.2-173
 state: ONLINE
  scan: pool compatibility issue detected.
   see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...

If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported.  Further advice on how to proceed will be
provided by the error message as follows.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #2 detected.
 action: The pool can not be imported with this version of ZFS due to an
         active asynchronous destroy.  Revert to an earlier version and
         allow the destroy to complete before updating.
         see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:

zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w

Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.

The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys.  Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.

This patch does have one limitation that should be mentioned.  It will not
detect errata #2 on a pool unless errata #1 is also present.  It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.

End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL.  The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root.  This will display a non-zero
value for any pool with an active asynchronous destroy.

Lastly, it is expected that no user data has been lost as a result of
this erratum.

Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf
ffe9d38275 Add generic errata infrastructure
From time to time it may be necessary to inform the pool administrator
about an errata which impacts their pool.  These errata will by shown
to the administrator through the 'zpool status' and 'zpool import'
output as appropriate.  The errata must clearly describe the issue
detected, how the pool is impacted, and what action should be taken
to resolve the situation.  Additional information for each errata will
be provided at http://zfsonlinux.org/msg/ZFS-8000-ER.

To accomplish the above this patch adds the required infrastructure to
allow the kernel modules to notify the utilities that an errata has
been detected.  This is done through the ZPOOL_CONFIG_ERRATA uint64_t
which has been added to the pool configuration nvlist.

To add a new errata the following changes must be made:

* A new errata identifier must be assigned by adding a new enum value
  to the zpool_errata_t type.  New enums must be added to the end to
  preserve the existing ordering.

* Code must be added to detect the issue.  This does not strictly
  need to be done at pool import time but doing so will make the
  errata visible in 'zpool import' as well as 'zpool status'.  Once
  detected the spa->spa_errata member should be set to the new enum.

* If possible code should be added to clear the spa->spa_errata member
  once the errata has been resolved.

* The show_import() and status_callback() functions must be updated
  to include an informational message describing the errata.  This
  should include an action message describing what an administrator
  should do to address the errata.

* The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be
  updated to describe the errata.  This space can be used to provide
  as much additional information as needed to fully describe the errata.
  A link to this documentation will be automatically generated in the
  output of 'zpool import' and 'zpool status'.

Original-idea-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf
731782ec31 Use expected zpool_status_t type
Both the zpool_import_status() and zpool_get_status() functions
return the zpool_status_t enum.  This explicit type should be used
rather than the more generic int type.

This patch makes no functional change and should only be considered
code cleanup.  It happens to have been done in the context of #2094
because that's when I noticed this issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Richard Yao
ed9e8368d3 Revert changes to zbookmark_t
Commit 1421c89142 added a field to
zbookmark_t that unintentinoally caused a disk format change. This
negatively affected backward compatibility and platform portability.
Therefore, this field is being removed.

The function that field permitted is left unimplemented until a later
patch that will reimplement the field in a way that does not affect the
disk format.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:39 -08:00
Brian Behlendorf
a16bc6bdd9 Add zimport.sh compatibility test script
Verify that an assortment of known good reference pools can be imported
using different versions of the ZoL code.

By default references pools for the major ZFS implementation will be
checked against the most recent ZoL tags and the master development branch.
Alternate tags or branches may be verified with the '-s <src-tag> option.
Passing the keyword "installed" will instruct the script to test whatever
version is installed.

Preferentially a reference pool is used for all tests.  However, if one
does not exist and the pool-tag matches one of the src-tags then a new
reference pool will be created using binaries from that source build.
This is particularly useful when you need to test your changes before
opening a pull request.

New reference pools may be added by placing a bzip2 compressed tarball
of the pool in the scripts/zpool-example directory and then passing
the -p <pool-tag> option.  To increase the test coverage reference pools
should be collected for all the major ZFS implementations.  Having these
pools easily available is also helpful to the developers.

Care should be taken to run these tests with a kernel supported by all
the listed tags.  Otherwise build failure will cause false positives.

EXAMPLES:

The following example will verify the zfs-0.6.2 tag, the master branch,
and the installed zfs version can correctly import the listed pools.
Note there is no reference pool available for master and installed but
because binaries are available one is automatically constructed.  The
working directory is also preserved between runs (-k) preventing the
need to rebuild from source for multiple runs.

 zimport.sh -k -f /var/tmp/zimport \
     -s "zfs-0.6.1 zfs-0.6.2 master installed" \
     -p "all master installed"

--------------------- ZFS on Linux Source Versions --------------
                zfs-0.6.1       zfs-0.6.2       master          0.6.2-180
-----------------------------------------------------------------
Clone SPL       Skip		Skip		Skip		Skip
Clone ZFS       Skip		Skip		Skip		Skip
Build SPL       Skip		Skip		Skip		Skip
Build ZFS       Skip		Skip		Skip		Skip
-----------------------------------------------------------------
zevo-1.1.1      Pass		Pass		Pass		Pass
zol-0.6.1       Pass		Pass		Pass		Pass
zol-0.6.2-173   Fail		Fail		Pass		Pass
zol-0.6.2       Pass		Pass		Pass		Pass
master          Fail		Fail		Pass		Pass
installed       Pass		Pass		Pass		Pass

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #2094
2014-02-21 12:10:31 -08:00
Tim Chase
98fad86293 Propagate errors when registering "relatime" property callback.
Various errors can occur when registering property callbacks.  As the
author's comments indicate, the code is very paranoid about preserving
the first-seen error when registering callbacks.  This patch causes an
error seen while registering the "relatime" callback to not clobber a
previously-seen error.

Reported-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2117
2014-02-12 09:38:28 -08:00
Brian Behlendorf
99d3ece847 Add default FILEDIR path to zpool-config scripts
Allow the caller of the zpool-create.sh script to override
the default path where file vdevs are created.  This allows
for greated flexibilty when scripting.

Additionally, update the default path from /tmp/ to /var/tmp/
because these days /tmp/ is likely a ramdisk.  Even though
these files are sparse they may grow large in which case they
should be backed by a physical device.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2120
2014-02-12 09:37:46 -08:00
Ralf Ertzinger
f12971e6f5 Add explicit Conflicts for zfs-fuse packages
zfs-fuse provides the same commands and man page names as ZoL.
Changing the names on either side would make each incompatible with
all existing documentation about ZFS. Providing bit identical files
is not possible due to differing codebases.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1866
2014-02-10 15:54:27 -08:00
Brian Behlendorf
0820ec65c4 Fix zconfig.sh test 9
Commit ba6a240 adjusted the behavior of 'zfs create -V'.  The
caller is no longer guaranteed that udev will have finished
creating the /dev/ entries by the time to command exits.  It
is therefore required that we explicitly block waiting for
udev to settle for this test to run reliably.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-02-10 15:48:32 -08:00
Ralf Ertzinger
881f45c6a8 Add systemd unit files for ZFS startup
This adds systemd unit files replacing the functionality offered by
the SysV init script found in etc/init.d.

It has been developed and tested on Fedora 19, Fedora 20
and openSuSE 13.1.

Four unit files and one target are offered.

zfs-import-cache.service:
    Import pools from /etc/zfs/zpool.cache. This unit will wait for
    udev to settle.
zfs-import-scan.service:
    Import pools by scanning /dev/disk/by-id for zvols. This unit will
    only run if /etc/zfs/zpool.cache is not present. This unit will wait
    for udev to settle
zfs-mount.service:
    Mount ZFS native filesystems. It contains a dependency to be loaded
    before local-fs.target.
zfs-share.service:
    Share NFS/SMB filesystems. This unit contains a dependency that
    will cause it to be restarted whenever the smb or nfs-server unit
    is restarted, restoring the shares added.
zfs.target:
    This target pulls in the other units in order to start ZFS. It's
    the only unit that can be enabled/disabled, all other services
    are static and pulled in by dependencies. It will honour zfs=off
    and zfs=no options on the kernel command line.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2108
2014-02-05 12:25:30 -08:00
Brian Behlendorf
c5cb66addc Fix corrupted l2_asize in arcstats
Commit e0b0ca9 accidentally corrupted the l2_asize displayed in
arcstats.  This was caused by changing the l2arc_buf_hdr.b_asize
member from an int to uint32_t type.  There are places in the
code where this field is cast to a uint64_t resulting in the
b_hits member being treated as part of b_asize.

To resolve the issue the type has been changed to a uint64_t,
and the b_hits member is placed after the enum to prevent the
size of the structure from increasing.

This is a good example of exactly why it's a bad idea to use
ambiguous types (int) in these structures.

Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1990
2014-02-05 12:24:53 -08:00
Matthew Ahrens
2e7b7657cd 4188 assertion failed in dmu_tx_hold_free(): dn_datablkshift != 0
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

Refences:
  https://www.illumos.org/issues/4188
  illumos/illumos-gate@bb411a08b0

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2091
2014-01-31 10:49:34 -08:00
Matthew Ahrens
8b4646494c Illumos 4504 traverse_visitbp: visit group before user
4504 traverse_visitbp: visit DMU_GROUPUSED_OBJECT before DMU_USERUSED_OBJECT

Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>

References:
  https://illumos.org/issues/4504
  http://code.delphix.com/illumos-4504
  http://svnweb.freebsd.org/base?view=revision&revision=260812

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #2079
2014-01-29 15:50:49 -08:00
Tim Chase
6d111134c0 Implement relatime.
Add the "relatime" property.  When set to "on", a file's atime will only
be updated if the existing atime at least a day old or if the existing
ctime or mtime has been updated since the last access.  This behavior
is compatible with the Linux "relatime" mount option.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2064
Closes #1917
2014-01-29 15:50:44 -08:00
Patrik Greco
2278381ce2 Fix error message in zpios
The chunksize must always be strictly smaller than the regionsize.

Signed-off-by: Andrew Uselton <andrew.c.uselton@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2072
2014-01-29 15:11:56 -08:00
Cyril Plisko
01b738f457 Call gethrtime() only once per new txg creation
When transitioning current open TXG into QUIESCE state and opening
a new one txg_quiesce() calls gethrtime():
  - to mark the birth time of the new TXG
  - to record the SPA txg history kstat
  - implicitely inside spa_txg_history_add()

These timestamps are practically the same, so that the first one
can be used instead of the other two.  The only visible difference
is that inside spa_txg_history_add() the time spent in kmem_zalloc()
will be counted towards the opened TXG.

Since at this point the new TXG already exists (tx->tx_open_txg
has been already incremented) it is actually a correct accounting.

In any case this extra work is only happening when spa_txg_history
kstat is activated (i.e. zfs_txg_history > 0) and doesn't affect
the normal processing in any way.

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Issue #2075
2014-01-23 13:31:51 -08:00
Igor Lvovsky
478d64fdae Add additional state TXG_STATE_WAIT_FOR_SYNC for txg.
In several cases when digging into kstats we can found two txgs
in SYNC state, e.g.

txg     birth            state  nreserved  nread      nwritten ...
985452  258127184872561  C      0          373948416  2376272384 ...
985453  258129016180616  C      0          378173440  28793344 ...
985454  258129016271523  S      0          0          0 ...
985455  258130864245986  S      0          0          0 ...
985456  258130867458851  O      0          0          0 ...

However only first txg (985454) is really syncing at this moment.
The other one (985455) marked as SYNCED is actually in a post-QUIESCED
state and waiting to start sync.   So, the new TXG_STATE_WAIT_FOR_SYNC
state between TXG_STATE_QUIESCED and TXG_STATE_SYNCED was added to
reveal this situation.

txg     birth            state  nreserved  nread      nwritten ...
1086896 235261068743969  C      0          163577856  8437248 ...
1086897 235262870830801  C      0          280625152  822594048 ...
1086898 235264172219064  S      0          0          0 ...
1086899 235264936134407  W      0          0          0 ...
1086900 235264936296156  O      0          0          0 ...

Signed-off-by: Igor Lvovsky <ilvovsky@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2075
2014-01-23 13:31:51 -08:00
Shen Yan
93292b3081 Use enum type(zfetch_dirn_t) instead
Fix code with zfetch_dirn_t, which is more readable and clear.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2068
2014-01-23 12:56:33 -08:00
Tim Chase
4461aa6118 Allow chown/chgrp when no ACL SAs exist.
From the comment in the commit:

Some ZFS implementations (ZEVO) create neither a ZNODE_ACL nor a DACL_ACES
SA in which case ENOENT is returned from zfs_acl_node_read() when the
SA can't be located.  Allow chown/chgrp to succeed in these cases rather
than returning an error that makes no sense in the context of the caller.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfs-osx/zfs#86
Closes #1911
Closes #2029
2014-01-23 11:07:29 -08:00
Ned Bass
04aa2de8f7 vdev_file_io_start() to use taskq_dispatch(TQ_PUSHPAGE)
The vdev_file_io_start() function may be processing a zio that the
txg_sync thread is waiting on.  In this case it is not safe to perform
memory allocations that may generate new I/O since this could cause a
deadlock.  To avoid this, call taskq_dispatch() with TQ_PUSHPAGE
instead of TQ_SLEEP.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1928
2014-01-23 09:58:07 -08:00
Brian Behlendorf
3566d5c7c3 Remove incorrect use of EXTRA_DIST for man pages
Setting the 'dist_' prefix is the correct way to instruct Automake
to include these files in the distribution.  The EXTRA_DIST variable
is reserved for files which are not covered by the automatic rules.

  http://www.gnu.org/software/automake/manual/automake.html#Basics

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-01-17 11:50:08 -08:00
Ned Bass
09d0b30fd1 vdev_id: support per-channel slot mappings
The vdev_id udev helper currently applies slot renumbering rules to
every channel (JBOD) in the system.  This is too inflexible for systems
with non-homogeneous storage topologies.  The "slot" keyword now takes
an optional third parameter which names a channel to which the mapping
will apply.  If the third parameter is omitted then the rule applies to
all channels.  The first-specified rule that can match a slot takes
precedence.  Therefore a channel-specific rule for a given slot should
generally appear before a generic rule for the same slot number.  In
this way a custom slot mapping can be applied to a particular channel
and a default mapping applied to the rest.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2056
2014-01-17 11:17:54 -08:00