zfs_dbgmsg() does not need newline at the end of the message.
While there, slightly update/sync FreeBSD __dprintf().
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16536
Adding O_DIRECT support to ZFS to bypass the ARC for writes/reads.
O_DIRECT support in ZFS will always ensure there is coherency between
buffered and O_DIRECT IO requests. This ensures that all IO requests,
whether buffered or direct, will see the same file contents at all
times. Just as in other FS's , O_DIRECT does not imply O_SYNC. While
data is written directly to VDEV disks, metadata will not be synced
until the associated TXG is synced.
For both O_DIRECT read and write request the offset and request sizes,
at a minimum, must be PAGE_SIZE aligned. In the event they are not,
then EINVAL is returned unless the direct property is set to always (see
below).
For O_DIRECT writes:
The request also must be block aligned (recordsize) or the write
request will take the normal (buffered) write path. In the event that
request is block aligned and a cached copy of the buffer in the ARC,
then it will be discarded from the ARC forcing all further reads to
retrieve the data from disk.
For O_DIRECT reads:
The only alignment restrictions are PAGE_SIZE alignment. In the event
that the requested data is in buffered (in the ARC) it will just be
copied from the ARC into the user buffer.
For both O_DIRECT writes and reads the O_DIRECT flag will be ignored in
the event that file contents are mmap'ed. In this case, all requests
that are at least PAGE_SIZE aligned will just fall back to the buffered
paths. If the request however is not PAGE_SIZE aligned, EINVAL will
be returned as always regardless if the file's contents are mmap'ed.
Since O_DIRECT writes go through the normal ZIO pipeline, the
following operations are supported just as with normal buffered writes:
Checksum
Compression
Encryption
Erasure Coding
There is one caveat for the data integrity of O_DIRECT writes that is
distinct for each of the OS's supported by ZFS.
FreeBSD - FreeBSD is able to place user pages under write protection so
any data in the user buffers and written directly down to the
VDEV disks is guaranteed to not change. There is no concern
with data integrity and O_DIRECT writes.
Linux - Linux is not able to place anonymous user pages under write
protection. Because of this, if the user decides to manipulate
the page contents while the write operation is occurring, data
integrity can not be guaranteed. However, there is a module
parameter `zfs_vdev_direct_write_verify` that controls the
if a O_DIRECT writes that can occur to a top-level VDEV before
a checksum verify is run before the contents of the I/O buffer
are committed to disk. In the event of a checksum verification
failure the write will return EIO. The number of O_DIRECT write
checksum verification errors can be observed by doing
`zpool status -d`, which will list all verification errors that
have occurred on a top-level VDEV. Along with `zpool status`, a
ZED event will be issues as `dio_verify` when a checksum
verification error occurs.
ZVOLs and dedup is not currently supported with Direct I/O.
A new dataset property `direct` has been added with the following 3
allowable values:
disabled - Accepts O_DIRECT flag, but silently ignores it and treats
the request as a buffered IO request.
standard - Follows the alignment restrictions outlined above for
write/read IO requests when the O_DIRECT flag is used.
always - Treats every write/read IO request as though it passed
O_DIRECT and will do O_DIRECT if the alignment restrictions
are met otherwise will redirect through the ARC. This
property will not allow a request to fail.
There is also a module parameter zfs_dio_enabled that can be used to
force all reads and writes through the ARC. By setting this module
parameter to 0, it mimics as if the direct dataset property is set to
disabled.
Reviewed-by: Brian Behlendorf <behlendorf@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Co-authored-by: Matt Macy <mmacy@FreeBSD.org>
Co-authored-by: Brian Behlendorf <behlendorf@llnl.gov>
Closes#10018
zfs_acl_node_alloc allocates an uninitialized data buffer, but upstack
zfs_acl_chmod only partially initializes it. KMSAN reported that this
memory remained uninitialized at the point when it was read by
lzjb_compress, which suggests a possible kernel memory disclosure bug.
The full KMSAN warning may be found in the PR.
https://github.com/openzfs/zfs/pull/16511
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: Axcient
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When process got SIGSTOP/SIGTSTP, issig() dequeue them and return 0.
But process could still have another signal pending after dequeue. So,
after dequeue, check and return 1, if signal_pending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#16464
Dispatched delayed tasks were not added to tasks_total, and cancelled
tasks were not removed. This notably could make tasks_total go to
UNIT64_MAX, but just generally meant the count could be wrong. So lets
not!
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16473
Commit 329e2ffa4bca456e65c3db7f5c5c04931c551b61 has made mount.zfs(8) to
call libzfs function 'zfs_mount_at', in order to propagate dataset
properties into mount options. This fix however, is limited to a special
use case where mount.zfs(8) is used in initrd with option '-o zfsutil'.
If either initrd or the user need to use mount.zfs(8) to mount a file
system with 'mountpoint' set to 'legacy', '-o zfsutil' can't be used and
the original issue #7947 will still happen.
Since the existing code already excluded the possibility of calling
'zfs_mount_at' when it was invoked as a helper program from zfs(8), by
checking 'ZFS_MOUNT_HELPER' environment variable, it makes no sense to
avoid calling 'zfs_mount_at' without '-o zfsutil'.
An exception however, is when mount.zfs(8) was invoked with '-o remount'
to update the mount options for an existing mount point. In this case
call mount(2) directly without modifying the mount options passed from
command line.
Furthermore, don't run mount.zfs(8) helper for automounting snapshot.
The above change to make mount.zfs(8) to call 'zfs_mount_at'
apparently caused it to trigger an automount for the snapshot
directory. When the helper was invoked as a result of a snapshot
automount, an infinite recursion will occur.
Since the need of invoking user mode mount(8) for automounting was to
overcome that the 'vfs_kern_mount' being GPL-only, just run mount(8)
without the mount.zfs(8) helper by adding option '-i'.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: WHR <whr@rivoreo.one>
Closes#16393
Removing the platform #ifdefs from shared headers in favour of
per-platform headers. Makes abd_t much leaner, among other things.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
The Linux abd_os.c serves double-duty as the userspace scatter abd
implementation, by carrying an emulation of kernel scatterlists. This
commit lifts common and userspace-specific parts out into a separate
abd_os.c for libzpool.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
Nothing ever checks it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
zfs_arc_shrinker_limit (default: 10000) avoids ARC collapse
due to excessive memory reclaim. However, when the kernel is
in direct reclaim mode (ie: low on memory), limiting ARC reclaim
increases OOM risk. This is especially true on system without
(or with inadequate) swap.
This patch ignores zfs_arc_shrinker_limit when the kernel is in
direct reclaim mode, avoiding most OOM. It also restores
"echo 3 > /proc/sys/vm/drop_caches" ability to correctly drop
(almost) all ARC.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#16313
Rob Noris suggested that we could clean up redundant limits for the case
of non-blk mq scenario.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16462
In kernels 6.8 and later, the zvol block device is allocated with
qlimits passed during initialization. However, the zvol driver does not
set `max_hw_discard_sectors`, which is necessary to properly
initialize `max_discard_sectors`. This causes the `zvol_misc_trim` test
to fail on 6.8+ kernels when invoking the `blkdiscard` command. Setting
`max_hw_discard_sectors` in the `HAVE_BLK_ALLOC_DISK_2ARG` case resolve
the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16462
These had minimal useful information for the admin, didn't work properly
in some places, and knew far too much about taskq internals.
With the new stats available, these should never be needed anymore.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
This adds /proc/spl/kstats/taskq/summary, which attempts to show a
useful subset of stats for all taskqs in the system.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
This exposes a variety of per-taskq stats under /proc/spl/kstat/taskq,
one file per taskq, named for the taskq name.instance.
These include a small amount of info about the taskq config, the current
state of the threads and queues, and various counters for thread and
queue activity since the taskq was created.
To assist with decrementing queue size counters, the list an entry is on
is encoded in spare bits in the entry flags.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
For spl-taskq to use the kstats infrastructure, it has to be available
first.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
Skip ro check for snapshots since they are always ro regardless if ro
flag is passed by mount or not. This allows multi-mounting snapshots
without requiring to specify ro flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#16299
zvol queue limits initialization depends on `zv_volblocksize`, but it is
initialized later, leading to several limits being initialized with
incorrect values, including `max_discard_*` limits. This also causes
`blkdiscard` command to consistently fail, as `blk_ioctl_discard` reads
`bdev_max_discard_sectors()` limits as 0, leading to failure. The fix is
straightforward: initialize `zv->zv_volblocksize` early, before setting
the queue limits. This PR should fix `zvol/zvol_misc/zvol_misc_trim`
failure on recent PRs, as the test case issues `blkdiscard` for a zvol.
Additionally, `zvol_misc_trim` was recently enabled in `6c7d41a`,
which is why the issue wasn't identified earlier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16454
zvol_alloc_non_blk_mq()->blk_queue_set_write_cache() needs the disk
queue setup to prevent a NULL pointer deference.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16453
zpool upgraded with 'feature@project_quota' needs re-layout of SA's
to fix the SA_ZPL_PROJID at SA_PROJID_OFFSET (128). Its necessary for
the correct accounting of object usage against its projid.
Old object (created before upgrade) when gets a projid assigned, its
SA gets re-layout via sa_add_projid(). If object has xattr dir, SA
of xattr dir also gets re-layout. But SA re-layout of xattr objects
inside a xattr dir is not done.
Fix zfs_setattr_dir() to re-layout SA's on xattr objects, when setting
projid on old xattr object (created before upgrade).
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#16355Closes#16356
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Since the change to folios it has just been a wrapper anyway. Linux has
removed their wrapper, so we add one.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
These fields are very old, so no detection necessary; we just move them
into the limit setup functions.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Apply them with with the rest of the settings.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
Detect it, and use a macro to make sure we always match the prototype.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
In 6.11 struct queue_limits gains a 'features' field, where, among other
things, flush and write-cache are enabled. Detect it and use it.
Along the way, the blk_queue_set_write_cache() compat wrapper gets a
little cleanup. Since both flags are alway set together, its now a
single bool. Also the very very ancient version that sets q->flush_flags
directly couldn't actually turn it off, so I've fixed that. Not that we
use it, but still.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
It gets hairier again in Linux 6.11, so I want some actual theory of
operation laid out for next time.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
This applies the same change in #9115 to FreeBSD. This was actually the
old behavior in FreeBSD 12; it only regressed when FreeBSD support was
added to OpenZFS. As far as I can tell, the timeline went like this:
* Illumos's zfsvfs_teardown used an unconditional txg_wait_synced
* Illumos added the dirty data check [^4]
* FreeBSD merged in Illumos's conditional check [^3]
* OpenZFS forked from Illumos
* OpenZFS removed the dirty data check in #7795 [^5]
* @mattmacy forked the OpenZFS repo and began to add FreeBSD support
* OpenZFS PR #9115[^1] recreated the same dirty data check that Illumos
used, in slightly different form. At this point the OpenZFS repo did
not yet have multi-OS support.
* Matt Macy merged in FreeBSD support in #8987[^2] , but it was based on
slightly outdated OpenZFS code.
In my local testing, this vastly improves the reboot speed of a server
with a large pool that has 1000 datasets and is resilvering an HDD.
[^1]: https://github.com/openzfs/zfs/pull/9115
[^2]: https://github.com/openzfs/zfs/pull/8987
[^3]: 10b9d77bf1
[^4]: 5aaeed5c61
[^5]: https://github.com/openzfs/zfs/pull/7795
Sponsored by: Axcient
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#16268
Previous code evicted nr_to_scan items from each NUMA node. This
not only multiplied the eviction by the number of nodes, but could
exhaust the smaller ones, evicting inodes used by acive workload
and requiring their immediate recreation. This patch spreads the
requested eviction between all NUMA nodes proportionally to their
evictable counts, which should be closer to expected LRU logic.
See kernel's super_cache_scan() as a similar logic example.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16397
ZFS implements copy_file_range(2) using block cloning when possible.
This implementation must respect the RLIMIT_FSIZE limit.
zfs_clone_range() already checks the limit, so it is safe to remove this
check in zfs_freebsd_copy_file_range(). Moreover, the removed check
produces false positives: the length passed to copy_file_range(2) may be
larger than the input file size; as the man page notes, "for best
performance, call copy_file_range() with the largest len value
possible." In particular, some existing code passes SSIZE_MAX there.
The check in zfs_clone_range() clamps the length to the input file's
size before checking, but the removed check uses the caller supplied
length, so something like
$ echo a > /tmp/foo
$ limits -f 1024 cat /tmp/foo > /tmp/bar
fails because FreeBSD's cat(1) uses copy_file_range(2) in the manner
described above.
Reported-by: Philip Paeps <philip@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Currently, if a minor is in use when we try to remove it, we'll skip it
and never come back to it again. Since the zvol state is hung off the
minor in the kernel, this can get us into weird situations if something
tries to use it after the removal fails. It's even worse at pool export,
as there's now a vestigial zvol state with no pool under it. It's
weirder again if the pool is subsequently reimported, as the zvol code
(reasonably) assumes the zvol state has been properly setup, when it's
actually left over from the previous import of the pool.
This commit attempts to tackle that by setting a flag on the zvol if its
minor can't be removed, and then checking that flag when a request is
made and rejecting it, thus stopping new work coming in.
The flag also causes a condvar to be signaled when the last client
finishes. For the case where a single minor is being removed (eg
changing volmode), it will wait for this signal before proceeding.
Meanwhile, when removing all minors, a background task is created for
each minor that couldn't be removed on the spot, and those tasks then
wake and clean up.
Since any new tasks are queued on to the pool's spa_zvol_taskq,
spa_export_common() will continue to wait at export until all minors are
removed.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#14872Closes#16364
SET_ERROR is our facility for tracking errors internally. The negation
is to match the what the kernel expects from us. Thus, the negation
should happen outside of the SET_ERROR.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16364
This includes the last 12.x release (now EOL) and 13.0 development
versions (<1300139).
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Linux provides SLAB_RECLAIM_ACCOUNT and __GFP_RECLAIMABLE flags to
mark memory allocations that can be freed via shinker calls. It
should allow kernel to tune and group such allocations for lower
memory fragmentation and better reclamation under pressure.
This patch marks as reclaimable most of ARC memory, directly
evictable via ZFS shrinker, plus also dnode/znode/sa memory,
indirectly evictable via kernel's superblock shrinker.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
- When receiving memory pressure signal from OS be more strict
trying to free some memory. Otherwise kernel may come again and
request much more. Return as result how much arc_c was actually
reduced due to this request, that may be less than requested.
- On Linux when receiving direct reclaim from some file system
(that may be ZFS) instead of ignoring request completely, just
shrink the ARC, but do not wait for eviction. Waiting there may
cause deadlock. Ignoring it as before may put extra pressure on
other caches and/or swap, and cause OOM if nothing help. While
not waiting may result in more ARC evicted later, and may be too
late if OOM killer activate right now, but I hope it to be better
than doing nothing at all.
- On Linux set arc_no_grow before waiting for reclaim, not after,
or it may grow back while we are waiting.
- On Linux add new parameter zfs_arc_shrinker_seeks to balance
ARC eviction cost, relative to page cache and other subsystems.
- Slightly update Linux arc_set_sys_free() math for new kernels.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Changed zfs_k(un)map_atomic to zfs_k(un)map_local
Signed-off-by: Jason Lee <jasonlee@lanl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
This helper was introduced long ago, in 5.16. Since 6.10, bd_inode no
longer exists, but the helper has been updated, so detect it and use it
in all versions where it is available.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux 6.10 change kmem_cache_alloc to be a macro, rather than a
function, such that the old #undef for it in spl-kmem-cache.c would
remove its definition completely, breaking the build.
This inverts the model used before. Rather than always defining the
kmem_cache_* macro, then undefining then inside spl-kmem-cache.c,
instead we make a special tag to indicate we're currently inside
spl-kmem-cache.c, and not defining those in macros in the first place,
so we can use the kernel-supplied kmem_cache_* functions to implement
spl_kmem_cache_*, as we expect.
For all other callers, we create the macros as normal and remove access
to the kernel's own conflicting names.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux has started moving to a model where instead of applying block
queue limits through individual modification functions, a complete
limits structure is built up and applied atomically, either when the
block device or open, or some time afterwards. As of 6.10 this
transition appears only partly completed.
This commit matches that model within OpenZFS in a way that should work
for past and future kernels. We set up a queue limits structure with any
limits that have had their modification functions removed. For newer
kernels that can have limits applied at block device open
(HAVE_BLK_ALLOC_DISK_2ARG), we have a conversion function to turn the
OpenZFS queue limits structure into Linux's queue_limits structure,
which can then be passed in. For older kernels, we provide an
application function that just calls the old functions for each limit in
the structure.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
This freeuio() interface was introduced to FreeBSD recently. For now
it simply calls free(), so this change has no effect. However, this
may not always be true, and in CheriBSD this change is required.
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brooks Davis <brooks.davis@sri.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
In several functions, we use a flag variable to track whether
zv_suspend_lock is held. This flag was not getting reset in a
particular case where we need to retry the underlying operation,
resulting in a lock leak. Make sure to update the flag where necessary.
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The 6.9 kernel behaves differently in how it releases block devices. In
the common case it will async release the device only after the return
to userspace. This is different from the 6.8 and older kernels which
release the block devices synchronously. To get around this, call
add_disk() from a workqueue so that the kernel uses a different
codepath to release our zvols in the way we expect. This stops
zfs_allow_010_pos from hanging.
Fixes: #16089
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Otherwise if zfs is unloaded and reroot is being used it trips over a
stale pointer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#16242
Recent UMA changes repurposed the use of UMA_MD_SMALL_ALLOC in a way
that breaks arc_available_memory on -CURRENT. This change
ensures that arc_available_memory uses the new symbol
while maintaining compatibility with older FreeBSD releases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Bojan Novković <bnovkov@FreeBSD.org>
Closes#16230
These members have directly references to the global variables
exposed by the kernel. They are not going to be changed by this
kernel module.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Zhenlei Huang <zlei@FreeBSD.org>
Closes#16210
We always call it twice with JUSTLOOKING and then FORREAL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#16225
Originally Solaris didn't expect errors there, but they may happen
if we fail to add entry into ZAP. Linux fixed it in #7421, but it
was never fully ported to FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13215Closes#16138
