This check was accidentally broken when the kABI checks were updated
to run in parallel, commit 608f874. The check must be for the
config_debug_lock_alloc_license name to determine if the symbol
is license compatible.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10991
The m4 objtool configure check can incorrectly fail because of a
missing header in the test. This appears to be the result of a
recent kernel change and was observed on the Fedora 5.8.11-200
kernel.
In file included from /home/fedora/zfs/build/objtool/objtool.c:75:
./arch/x86/include/asm/frame.h💯57: error: 'struct pt_regs'
declared inside parameter list will not be visible outside
of this definition or declaration [-Werror]
The consequence of this is that the "stack_frame_non_standard"
check is never run and HAVE_STACK_FRAME_NON_STANDARD is set
incorrectly which results in a build failure. This change adds
the appropriate header to the "objtool" check so it now behaves
as intended.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10990
The zfs-initramfs package has never worked as no RPM-based distribution
uses initramfs-tools, which is listed as a dependency of zfs-initramfs.
This would not ordinarily be a problem, as it is only enabled when
/usr/share/initramfs-tools is present, which should not normally be the
case on RPM-based distributions. However, other packages may install
unused files there even if initramfs-tools is not used, so remove this
auto-detection for the rpm-utils target.
This does not fully remove the logic for the zfs-initramfs package. This
splits it out into a separate rpm-utils-initramfs target so that the
Debian builds can still use it.
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Closes#10898
Several of the listed library dependencies are not relevant on FreeBSD.
Have ./configure save libraries that are found via pkg-config as
${LIB}_PC and use the configured automake variables instead of hard
coded names so we only get what was actually needed.
While here, update the URL to point at the OpenZFS Github repo.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#10869
Commit dcdc12e added compatibility code to treat NR_SLAB_RECLAIMABLE_B
as if it were the same as NR_SLAB_RECLAIMABLE. However, the new value
is in bytes while the old value was in pages which means they are not
interchangeable.
The only place the reclaimable slab size is used is as a component of
the calculation done by arc_free_memory(). This function returns the
amount of memory the ARC considers to be free or reclaimable at little
cost. Rather than switch to a new interface to get this value it has
been removed it from the calculation. It is normally a minor component
compared to the number of inactive or free pages, and removing it
aligns the behavior with the FreeBSD version of arc_free_memory().
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10834
This will allow an override of auto-detection of distribution, which
is based on checking presence of /etc/*-release files.
Build systems makes a lot of file location assumptions based on
detected distribution.
Some distributions (like gentoo) may prefer explicitly
setting --with-vendor=gentoo to avoid auto-detection.
Since auto-detection checks all files in order, current script may
misdetect even on gentoo system if /etc/redhat-release file is present
Default behavior is unchanged and default is --with-vendor=check
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Georgy Yakovlev <gyakovlev@gentoo.org>
Closes#10835
ZStandard is a modern, high performance, general compression algorithm.
It provides similar or better compression levels to GZIP, but with much
better performance. ZStandard provides a large selection of compression
levels to allow a storage administrator to select the preferred
performance/compression trade-off.
This commit imports the unmodified ZStandard single-file library which
will be used by ZFS.
The implementation of this new library is done with future updates of
zstd in mind. For this reason we integrated the code in a way, that does
not require modifications to the library. For more details, see
`module/zstd/README.md`.
The library is excluded from codecov calculation and cppcheck as
unaltered dependencies do not need full codecov or cppcheck.
Co-authored-by: Allan Jude <allanjude@freebsd.org>
Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
The make_request_fn and associated API was replaced recently in a
Linux 5.9 merge, to replace its functionality with a new submit_bio
member in struct block_device_operations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#10696
This change appears to primarily be a name change for the enum. Had
to update the test logic so that it works so long as either one of
these is present (favoring the newer one). Additionally, as this is
newer, it only shows up in node_page_item, so this commit doesn't
test zone_page_item for the same enum.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#10696
Many of the block device operations (often functions with bdev in
the name) were moved into linux/blkdev.h from linux/fs.h. Seems
that this header is already included where needed in the code, but
in the autoconf tests it was missing causing false negatives. This
commit has those tests include linux/fs.h (old location) and now
also linux/blkdev.h (new locations).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#10696
FreeBSD defines _BIG_ENDIAN BIG_ENDIAN _LITTLE_ENDIAN
LITTLE_ENDIAN on every architecture. Trying to do
cross builds whilst hiding this from ZFS has proven
extremely cumbersome.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#10621
Stock kernels older than 4.10 do not export the has_capability()
function which is required by commit e59a377. To avoid breaking
the build on older kernels revert to the safe legacy behavior and
return EACCES when privileges cannot be checked.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10565Closes#10573
A bunch of places need to edit files to incorporate the configured paths
i.e. bindir, sbindir etc. Move this logic into a common file.
Create arc_summary by copying arc_summary[23] as appropriate at build
time instead of install time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10559
The configure variables won't be defined if CONFIG_KERNEL is disabled
and defining empty macros causes errors. The spec files do provide some
defaults if the macros are undefined.
Remove config conditionals in the tgz Makefile.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10564
When building srpm using make -j, each of the recursive makes invoked to
build srpm-{dkms,kmod,utils} will build the dist target. This is both
unnecessary, and also has a very good chance of breaking when they race
trying to build gitrev.
Fix this by make dist a prerequisite of srpm-{dkms,kmod,utils} instead
of srpm-common, so that it will be done once before invoking the
recursive makes.
Also, gitrev is not really required for make dist, so instead of adding
it to BUILT_SOURCES, just add it as a prerequisite of the all target.
Mark the individual package targets as PHONY.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10564
Make FIND_SYSTEM_LIBRARY respect a configured sysroot, otherwise it
might find headers from the build machine and assume the library is
available on the host/target.
Tighten up error checking: if pkg-config or the user specified _CFLAGS
or _LIBS but we can't find the header/library, issue a fatal error.
Fix the -L flag to /usr/local/lib instead of just /usr/local.
Clean out the _CFLAGS and _LIBS if we located something that we later
find doesn't work.
Rename FIND_SYSTEM_LIBRARY into the ZFS_AC_ scope.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10538
Commit e8864b1b28 ("config: libintl/libiconv for gettext() detection")
added an empty config.rpath with a comment that the real one doesn't
work with libtool.
However, an empty config.rpath doesn't really work: eg. on FreeBSD,
where libintl is in /usr/local/lib, configure thinks that gettext
doesn't exist and NLS should be disabled, which currently isn't
supported in the source, and hence requires manual workaround to
directly link -lintl without relying on configure. config.rpath is
essential to let it be detected either in --prefix or using
--with-libintl-prefix.
I also don't see the mentioned issue with libtool flags applied to
compilation, it seems to work fine to pass LTLIBINTL to libtool. It's
unnecessary to include LTLIBICONV as the configure test will
automatically append that to LTLIBINTL if it is necessary to link with
libiconv.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10538
libzutil is currently statically linked into libzfs, libzfs_core and
libzpool. Avoid the unnecessary duplication by removing it from libzfs
and libzpool, and adding libzfs_core to libzpool.
Remove a few unnecessary dependencies:
- libuutil from libzfs_core
- libtirpc from libspl
- keep only libcrypto in libzfs, as we don't use any functions from
libssl
- librt is only used for clock_gettime, however on modern systems that's
in libc rather than librt. Add a configure check to see if we actually
need librt
- libdl from raidz_test
Add a few missing dependencies:
- zlib to libefi and libzfs
- libuuid to zpool, and libuuid and libudev to zed
- libnvpair uses assertions, so add assert.c to provide aok and
libspl_assertf
Sort the LDADD for programs so that libraries that satisfy dependencies
come at the end rather than the beginning of the linker command line.
Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY
instead. This can take advantage of pkg-config, and it also avoids
polluting LIBS.
List all the required dependencies in the pkgconfig files, and move the
one for libzfs_core into the latter's directory. Install pkgconfig files
in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on
FreeBSD, instead of /usr/share/pkgconfig, as the more correct location
for library .pc files.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10538
a+=b is not supported by all shells. It is equivalent to a=${a}b, so
just rewrite it as that.
This also fixes commit 9ea6c3d3, which intended to only make the
definitions of _dracutdir, _udevdir, and _udevruledir conditional, but
actually ensured that _initconfdir no longer got defined if _dracutdir
was defined, and defined _udevdir to the value that should have been
used for _udevruledir.
This also fixes the fact that the checks introduced by commit 9ea6c3d3
could never work: ZFS_AC_PACKAGE was called before the configuration
options were processed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Closes#10518
The standard test command does not support the == operator. Certain
shells, including bash, do support it, but in those shells it does
exactly the same thing as the standard = operator. Use that instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Closes#10509
This doesn't appear to be used by the buildbot any more, let's remove
it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10506
A previous commit enabled the tracking of object allocations
in Linux-backed caches from the SPL layer for debuggability.
The commit is: 9a170fc6fe54f1e852b6c39630fe5ef2bbd97c16
Unfortunately, it also introduced minor performance regressions
that were highlighted by the ZFS perf test-suite. Within Delphix
we found that the regression would be from -1%, all the way up
to -8% for some workloads.
This commit brings performance back up to par by creating a
separate counter for those caches and making it a percpu in
order to avoid lock-contention.
The initial performance testing was done by myself, and the
final round was conducted by @tonynguien who was also the one
that discovered the regression and highlighted the culprit.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes#10397
Reduce the usage of EXTRA_DIST. If files are conditionally included in
_SOURCES, _HEADERS etc, automake is smart enough to dist all files that
could possibly be included, but this does not apply to EXTRA_DIST,
resulting in make dist depending on the configuration.
Add some files that were missing altogether in various Makefile's.
The changes to disted files in this commit (excluding deleted files):
+./cmd/zed/agents/README.md
+./etc/init.d/README.md
+./lib/libspl/os/freebsd/getexecname.c
+./lib/libspl/os/freebsd/gethostid.c
+./lib/libspl/os/freebsd/getmntany.c
+./lib/libspl/os/freebsd/mnttab.c
-./lib/libzfs/libzfs_core.pc
-./lib/libzfs/libzfs.pc
+./lib/libzfs/os/freebsd/libzfs_compat.c
+./lib/libzfs/os/freebsd/libzfs_fsshare.c
+./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
+./lib/libzfs/os/freebsd/libzfs_zmount.c
+./lib/libzutil/os/freebsd/zutil_compat.c
+./lib/libzutil/os/freebsd/zutil_device_path_os.c
+./lib/libzutil/os/freebsd/zutil_import_os.c
+./module/lua/README.zfs
+./module/os/linux/spl/README.md
+./tests/README.md
+./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh
+./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh
+./tests/zfs-tests/tests/functional/inheritance/README.config
+./tests/zfs-tests/tests/functional/inheritance/README.state
+./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh
+./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10501
Implements a pam module for automatically loading zfs encryption keys
for home datasets. The pam module:
- loads a zfs key and mounts the dataset when a session opens.
- unmounts the dataset and unloads the key when the session closes.
- when the user is logged on and changes the password, the module
changes the encryption key.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: @jengelh <jengelh@inai.de>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Felix Dörre <felix@dogcraft.de>
Closes#9886Closes#9903
The test added in commit
4313a5b4c5 ("Detect if sed supports --in-place")
doesn't work at least on my system (autoconfig-2.69).
The issue is that SED has already been found and cached before this
function is evaluated, with the result that the test is completely
skipped.
...
checking for a sed that does not truncate output... /usr/bin/sed
...
checking for sed --in-place... (cached) /usr/bin/sed
The first test is executed by libtool.m4. This looks to have been around
in libtool for at least 15 years or so, not sure why this was not
encountered at the time of the original commit.
Fix this by caching the value of the ac_inplace flag rather than the
path to SED. Also use $SED and add AC_REQUIRE to ensure that we use the
sed that was located by the standard configure test.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10493
Currently an out-of-tree build does not work with read-only source
directory because zfs_gitrev.h can't be created. Move this file to the
build directory, which is more appropriate for a generated file, and
drop the dist-hook for zfs_gitrev.h. There is no need to distribute this
file since it will be regenerated as part of the compilation in any
case.
scripts/make_gitrev.sh tries to avoid updating zfs_gitrev.h if there has
been no change, however this doesn't cover the case when the source
directory is not in git: in that case zfs_gitrev.h gets overwritten even
though it's always "unknown". Simplify the logic to always write out a
new version of zfs_gitrev.h, compare against the old and overwrite only
if different. This is now simple enough to just include in the
Makefile, so drop the script.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10493
Rephrase comments to be more clear.
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#10481
Switch on warning flags to detect mismatch between declaration and
definition.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes#10470
Correct various typos in the comments and tests.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes#10423
The `pgprot` argument has been removed from `__vmalloc` in Linux 5.8,
being `PAGE_KERNEL` always now [1].
Detect this during configure and define a wrapper for older kernels.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/mm/vmalloc.c?h=next-20200605&id=88dca4ca5a93d2c09e5bbc6a62fbfc3af83c4fca
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#10422
Usage of this variable uninitialized triggers -Werror,-Wuninitialized
when compiled under clang for linux kernel 5.6, leading the build system
to believe that the function is not declared.
This commit initializes the variable to suppress the warning and fix the
build for kernel 5.6 with clang.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hiếu Lê <leorize+oss@disroot.org>
Closes#10279Closes#10281
Add the FreeBSD platform code to the OpenZFS repository. As of this
commit the source can be compiled and tested on FreeBSD 11 and 12.
Subsequent commits are now required to compile on FreeBSD and Linux.
Additionally, they must pass the ZFS Test Suite on FreeBSD which is
being run by the CI. As of this commit 1230 tests pass on FreeBSD
and there are no unexpected failures.
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#898Closes#8987
Commit https://github.com/torvalds/linux/commit/3d745ea5 simplified
the blk_alloc_queue() interface by updating it to take the request
queue as an argument. Add a wrapper function which accepts the new
arguments and internally uses the available interfaces.
Other minor changes include increasing the Linux-Maximum to 5.6 now
that 5.6 has been released. It was not bumped to 5.7 because this
release has not yet been finalized and is still subject to change.
Added local 'struct zvol_state_os *zso' variable to zvol_alloc.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10181Closes#10187
When configuring as builtin (--enable-linux-builtin) for kernels
without loadable module support (CONFIG_MODULES=n) only the object
file is created. Never a loadable kmod.
Update ZFS_LINUX_TRY_COMPILE to handle this in a manor similar to
the ZFS_LINUX_TEST_COMPILE_ALL macro.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9887Closes#10063
Commit https://github.com/torvalds/linux/commit/9e8d42a0f accidentally
converted the static inline function blkg_tryget() to GPL-only for
kernels built with CONFIG_PREEMPT_RCU=y and CONFIG_BLK_CGROUP=y.
Resolve the build issue by providing our own equivalent functionality
when needed which uses rcu_read_lock_sched() internally as before.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9745Closes#10072
The getrawmonotonic() and getrawmonotonic64() interfaces have been
fully retired. Update gethrtime() to use the replacement interface
ktime_get_raw_ts64() which was introduced in the 4.18 kernel.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#10052Closes#10064
This PR fixes an issue wherein redirecting stdout and stderr when
building kernel modules in configure tests relied on a bashism that
does not work as expected when /bin/sh is not bash.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Andrew J. Hesford <ajh@sideband.org>
Closes#9990Closes#9998
Currently SIMD accelerated AES-GCM performance is limited by two
factors:
a. The need to disable preemption and interrupts and save the FPU
state before using it and to do the reverse when done. Due to the
way the code is organized (see (b) below) we have to pay this price
twice for each 16 byte GCM block processed.
b. Most processing is done in C, operating on single GCM blocks.
The use of SIMD instructions is limited to the AES encryption of the
counter block (AES-NI) and the Galois multiplication (PCLMULQDQ).
This leads to the FPU not being fully utilized for crypto
operations.
To solve (a) we do crypto processing in larger chunks while owning
the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced
to make this chunk size tweakable. It defaults to 32 KiB. This step
alone roughly doubles performance. (b) is tackled by porting and
using the highly optimized openssl AES-GCM assembler routines, which
do all the processing (CTR, AES, GMULT) in a single routine. Both
steps together result in up to 32x reduction of the time spend in
the en/decryption routines, leading up to approximately 12x
throughput increase for large (128 KiB) blocks.
Lastly, this commit changes the default encryption algorithm from
AES-CCM to AES-GCM when setting the `encryption=on` property.
Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-By: Jason King <jason.king@joyent.com>
Reviewed-By: Tom Caputi <tcaputi@datto.com>
Reviewed-By: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#9749
The timestamp_truncate() function was added, it replaces the existing
timespec64_trunc() function. This change renames our wrapper function
to be consistent with the upstream name and updates the compatibility
code for older kernels accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9956Closes#9961
The proc_ops structure was introduced to replace the use of of the
file_operations structure when registering proc handlers. This
change creates a new kstat_proc_op_t typedef for compatibility
which can be used to pass around the correct structure.
This change additionally adds the 'const' keyword to all of the
existing proc operations structures.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9961
Clang does not recognize -fno-ipa-sra, so add a check for it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#9946
Be default, clang treats unknown warning option as warning.
We need to use -Werror to make it an error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: 12101111 <w12101111@gmail.com>
Closes#9927
To better enable dynamic tracing tools (e.g. "bpftrace") this change
disables the "-fipa-sra" compilation optimization. This way, function
signatures are not changed by the compiler, which allows us to better
attach to kprobes and kretprobes with dynamic tracing tools. Otherwise,
the compiler may append ".isra" to the function name, and possibly
change the function arguments as well.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#9921
Over the years several slightly different approaches were used
in the Makefiles to determine the target architecture. This
change updates both the build system and Makefile to handle
this in a consistent fashion.
TARGET_CPU is set to i386, x86_64, powerpc, aarch6 or sparc64
and made available in the Makefiles to be used as appropriate.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9848
Rely on ax_code_coverage to exclude test directories.
- Removes broken codecov ignore
- Places ignore section in ax_code_coverage
- Forwards users from codecov to LCOV for ignores
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Closes#9726
As described in commit f81d5ef6 the zfs_vdev_elevator module
option is being removed. Users who require this functionality
should update their systems to set the disk scheduler using a
udev rule.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8664Closes#9417Closes#9609
Reinstate the zpl_revalidate() functionality to resolve a regression
where dentries for open files during a rollback are not invalidated.
The unrelated functionality for automatically unmounting .zfs/snapshots
was not reverted. Nor was the addition of shrink_dcache_sb() to the
zfs_resume_fs() function.
This issue was not immediately caught by the CI because the test case
intended to catch it was included in the list of ZTS tests which may
occasionally fail for unrelated reasons. Remove all of the rollback
tests from this list to help identify the frequency of any spurious
failures.
The rollback_003_pos.ksh test case exposes a real issue with the
long standing code which needs to be investigated. Regardless,
it has been enable with a small workaround in the test case itself.
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9587Closes#9592
This patch implements use of kvmalloc for GFP_KERNEL allocations, which
may increase performance if the allocator is able to allocate physical
memory, if kvmalloc is available as a public kernel interface (since
v4.12). Otherwise it will simply fall back to virtual memory (vmalloc).
Also fix vmem_alloc implementation which can lead to slow allocations
since the first attempt with kmalloc does not make use of the noretry
flag but tells the linux kernel to retry several times before it fails.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes#9034
Increase the minimum supported kernel version from 2.6.32 to 3.10.
This removes support for the following Linux enterprise distributions.
Distribution | Kernel | End of Life
---------------- | ------ | -------------
Ubuntu 12.04 LTS | 3.2 | Apr 28, 2017
SLES 11 | 3.0 | Mar 32, 2019
RHEL / CentOS 6 | 2.6.32 | Nov 30, 2020
The following changes were made as part of removing support.
* Updated `configure` to enforce a minimum kernel version as
specified in the META file (Linux-Minimum: 3.10).
configure: error:
*** Cannot build against kernel version 2.6.32.
*** The minimum supported kernel version is 3.10.
* Removed all `configure` kABI checks and matching C code for
interfaces which solely predate the Linux 3.10 kernel.
* Updated all `configure` kABI checks to fail when an interface is
missing which was in the 3.10 kernel up to the latest 5.1 kernel.
Removed the HAVE_* preprocessor defines for these checks and
updated the code to unconditionally use the verified interface.
* Inverted the detection logic in several kABI checks to match
the new interface as it appears in 3.10 and newer and not the
legacy interface.
* Consolidated the following checks in to individual files. Due
the large number of changes in the checks it made sense to handle
this now. It would be desirable to group other related checks in
the same fashion, but this as left as future work.
- config/kernel-blkdev.m4 - Block device kABI checks
- config/kernel-blk-queue.m4 - Block queue kABI checks
- config/kernel-bio.m4 - Bio interface kABI checks
* Removed the kABI checks for sops->nr_cached_objects() and
sops->free_cached_objects(). These interfaces are currently unused.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9566
This patch removes the need for zpl_revalidate altogether.
There were 3 main reasons why we used d_revalidate:
1. periodic automounted snapshots umount deferral
2. negative dentries created before snapshot rollback
3. stale inodes referenced by dentry cache after snapshot rollback
Periodic snapshots deferral solution introduces zfs_exit_fs function,
which is called as a part of ZFS_EXIT(zfsvfs_t) macro.
Negative dentries and stale inodes are solved by flushing the dcache
for the particular dataset on zfs_resume_fs call.
This patch also removes now unused HAVE_S_D_OP configure test.
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#8774Closes#9549
Contrary to initial testing we cannot rely on these kernels to
invalidate the per-cpu FPU state and restore the FPU registers.
Nor can we guarantee that the kernel won't modify the FPU state
which we saved in the task struck.
Therefore, the kfpu_begin() and kfpu_end() functions have been
updated to save and restore the FPU state using our own dedicated
per-cpu FPU state variables.
This has the additional advantage of allowing us to use the FPU
again in user threads. So we remove the code which was added to
use task queues to ensure some functions ran in kernel threads.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #9346Closes#9403
Not all versions of sed have the --in-place flag. Detect support for
the flag during ./configure and provide a fallback mechanism for those
systems where sed's behavior differs. The autoconf variable
${ac_inplace} can be used to choose the correct flags for editing a
file in place with sed.
Replace violating usages in Makefile.am with ${ac_inplace}.
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#9463
Factor Linux specific pieces out of libspl.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes#9336
Reduce the time required for ./configure to perform the needed
KABI checks by allowing kbuild to compile multiple test cases in
parallel. This was accomplished by splitting each test's source
code from the logic handling whether that code could be compiled
or not.
By introducing this split it's possible to minimize the number of
times kbuild needs to be invoked. As importantly, it means all of
the tests can be built in parallel. This does require a little extra
care since we expect some tests to fail, so the --keep-going (-k)
option must be provided otherwise some tests may not get compiled.
Furthermore, since a failure during the kbuild modpost phase will
result in an early exit; the final linking phase is limited to tests
which passed the initial compilation and produced an object file.
Once everything has been built the configure script proceeds as
previously. The only significant difference is that it now merely
needs to test for the existence of a .ko file to determine the
result of a given test. This vastly speeds up the entire process.
New test cases should use ZFS_LINUX_TEST_SRC to declare their test
source code and ZFS_LINUX_TEST_RESULT to check the result. All of
the existing kernel-*.m4 files have been updated accordingly, see
config/kernel-current-time.m4 for a basic example. The legacy
ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases
but it's use is not encouraged.
master (secs) patched (secs)
------------- ----------------
autogen.sh 61 68
configure 137 24 (~17% of current run time)
make -j $(nproc) 44 44
make rpms 287 150
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8547Closes#9132Closes#9341
Move platform specific Linux headers under include/os/linux/.
Update the build system accordingly to detect the platform.
This lays some of the initial groundwork to supporting building
for other platforms.
As part of this change it was necessary to create both a user
and kernel space sys/simd.h header which can be included in
either context. No functional change, the source has been
refactored and the relevant #include's updated.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Matthew Macy <mmacy@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9198
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes#9232
Resolve an assortment of style inconsistencies including
use of white space, typos, capitalization, and line wrapping.
There is no functional change.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#9030
Restore the SIMD optimization for 4.19.38 LTS, 4.14.120 LTS,
and 5.0 and newer kernels. This is accomplished by leveraging
the fact that by definition dedicated kernel threads never need
to concern themselves with saving and restoring the user FPU state.
Therefore, they may use the FPU as long as we can guarantee user
tasks always restore their FPU state before context switching back
to user space.
For the 5.0 and 5.1 kernels disabling preemption and local
interrupts is sufficient to allow the FPU to be used. All non-kernel
threads will restore the preserved user FPU state.
For 5.2 and latter kernels the user FPU state restoration will be
skipped if the kernel determines the registers have not changed.
Therefore, for these kernels we need to perform the additional
step of saving and restoring the FPU registers. Invalidating the
per-cpu global tracking the FPU state would force a restore but
that functionality is private to the core x86 FPU implementation
and unavailable.
In practice, restricting SIMD to kernel threads is not a major
restriction for ZFS. The vast majority of SIMD operations are
already performed by the IO pipeline. The remaining cases are
relatively infrequent and can be handled by the generic code
without significant impact. The two most noteworthy cases are:
1) Decrypting the wrapping key for an encrypted dataset,
i.e. `zfs load-key`. All other encryption and decryption
operations will use the SIMD optimized implementations.
2) Generating the payload checksums for a `zfs send` stream.
In order to avoid making any changes to the higher layers of ZFS
all of the `*_get_ops()` functions were updated to take in to
consideration the calling context. This allows for the fastest
implementation to be used as appropriate (see kfpu_allowed()).
The only other notable instance of SIMD operations being used
outside a kernel thread was at module load time. This code
was moved in to a taskq in order to accommodate the new kernel
thread restriction.
Finally, a few other modifications were made in order to further
harden this code and facilitate testing. They include updating
each implementations operations structure to be declared as a
constant. And allowing "cycle" to be set when selecting the
preferred ops in the kernel as well as user space.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8754Closes#8793Closes#8965
This commit ensures make(1) targets that build .deb packages fail if
alien(1) can't convert all .rpm files; additionally it also updates
the zfs-dracut package name which was changed to "noarch" in ca4e5a7.
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#8990Closes#8991
Don't require Python at configure/build unless building pyzfs.
Move ZFS_AC_PYTHON_MODULE to always-pyzfs.m4 where it is used.
Make test syntax more consistent.
Sponsored by: iXsystems, Inc.
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes#8895
If ZFS is built with enable_linux_builtin, it seems to be possible
to compile the kernel with TRIM_UNUSED_KSYM.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Torsten Wörtwein <twoertwein@gmail.com>
Closes#8820
Previously, --without-python would cause ./configure to fail. Now it is
able to proceed, and the Python scripts will not be built.
Use portable parameter expansion matching instead of nonstandard
substring matching to detect the Python version. This test is
duplicated in several places, so define a function for it.
Don't assume the full path to binaries, since different platforms do
install things in different places. Use AC_CHECK_PROGS instead.
When building without Python, also build without pyzfs.
Sponsored by: iXsystems, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Ryan Moeller <ryan@freqlabs.com>
Closes#8809Closes#8731
Per suggestion from @behlendorf in #8777, remove vn_set_fs_pwd() and
vn_set_pwd() which are only used in zfs_ioctl.c:_init() while loading
zfs.ko.
The rest of initialization functions being called here after cwd set
to / don't depend on cwd of the process except for spa_config_load().
spa_config_load() uses a relative path ".//etc/zfs/zpool.cache" when
`rootdir` is non-NULL, which is "/etc/zfs/zpool.cache" given cwd is /,
so just unconditionally use the absolute path without "./", so that
`vn_set_pwd("/")` as well as the entire functions can be removed.
This is also what FreeBSD does.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8826
"whether ->count_objects callback exists" test failed with
"error: error" message for using an incomplete function shrinker_cb().
This is caused by torvalds/linux@83da1bed86. It's configurable,
but we would want to be able to compile with default kbuild setting.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8776
This failed on 5.2-rc1 with "error: unknown" message, for set_fs_pwd()
not being visible in both const and non-const tests.
This is caused by torvalds/linux@83da1bed86. It's configurable,
but we would want to be able to compile with default kbuild setting.
set_fs_pwd() has never been exported with exception of some distro
kernels, and set_fs_pwd() wasn't used in ZoL to begin with. The test
result was used for a spl function vn_set_fs_pwd().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes#8777
kstrtoul() exists only after torvalds/linux@33ee3b2e2e in 2.6.39.
Use strict_strtoul() if kstrtoul() doesn't exist.
Note that strict_strtoul() has existed as an alias for kstrtoul()
for a while, but removed in torvalds/linux@3db2e9cdc0.
It looks like RHEL6 (2.6.32 based) has backported kstrtoul(),
and this caused build CI to pass compilation test.
It should fail on vanilla < 2.6.39 kernels or distro kernels without
backport as reported in #8760.
--
# grep "kstrtoul(" /lib/modules/2.6.32-754.12.1.el6.x86_64/build/ \
include/linux/kernel.h >/dev/null
# echo $?
0
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8760Closes#8761
In `config/kernel-timer.m4` refactor slightly to check more generally
for the new `timer_setup()` APIs, but also check the callback signature
because some kernels (notably 4.14) have the new `timer_setup()` API but
use the old callback signature. Also add a check for a `flags` member in
`struct timer_list`, which was added in 4.1-rc8.
Add compatibility shims to `include/spl/sys/timer.h` to allow using the
new timer APIs with the only two caveats being that the callback
argument type must be declared as `spl_timer_list_t` and an explicit
assignment is required to get the timer variable for the `timer_of()`
macro. So the callback would look like this:
```c
__cv_wakeup(spl_timer_list_t t)
{
struct timer_list *tmr = (struct timer_list *)t;
struct thing *parent = from_timer(parent, tmr,
parent_timer_field);
... /* do stuff with parent */
```
Make some minor changes to `spl-condvar.c` and `spl-taskq.c` to use the
new timer APIs instead of conditional code.
Reviewed-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Closes#8647
Linux kernel commit ca79b0c211af63fa3276f0e3fd7dd9ada2439839
"mm: convert totalram_pages and totalhigh_pages variables to atomic"
replaced `totalhigh_pages` with an inline function `totalhigh_pages()`.
This broke compilation on IA32, etc, as ZoL uses `totalhigh_pages`
on archs with highmem. Confirmed on Fedora 30 (5.0.9-301.fc30.i686).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes#8677Closes#8701
Detect in autoconf whether `-lintl` and possibly `-liconv` are necessary
for translation functions like `gettext()`.
The actual autoconf code is just:
```
AM_ICONV
AM_GNU_GETTEXT([external])
LIBS="$LIBS $LTLIBINTL $LTLIBICONV"
```
References:
https://www.gnu.org/software/gettext/manual/html_node/AM_005fGNU_005fGETTEXT.htmlhttps://www.gnu.org/software/gettext/manual/html_node/AM_005fICONV.html
The reason to check for `libiconv` and add it separately is that this is
sometimes necessary if users are linking statically.
The `config/*.m4` files were added by running `gettextize` and removing
everything else.
The empty file `config/config.rpath` is necessary to avoid an error with
some versions of autotools, see:
http://ramblingfoo.blogspot.com/2007/07/required-file-configrpath-not-found.html
The `config.rpath` copied by `gettextize` does not currently work, there
is some kind of missing interaction with `libtool` and it tries to apply
`libtool` flags to the compiler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Closes#8554
By default, depending on the version, gcc can reuse the frame pointer register.
This is a micro-optimization that might help on some very old x86 processors.
However, it also makes dynamic tracing less useful because the stacks cannot
be easily observed.
This rule change instructs gcc to use the -fno-omit-frame-pointer option
when compiling.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes#8617
UNMAP/TRIM support is a frequently-requested feature to help
prevent performance from degrading on SSDs and on various other
SAN-like storage back-ends. By issuing UNMAP/TRIM commands for
sectors which are no longer allocated the underlying device can
often more efficiently manage itself.
This TRIM implementation is modeled on the `zpool initialize`
feature which writes a pattern to all unallocated space in the
pool. The new `zpool trim` command uses the same vdev_xlate()
code to calculate what sectors are unallocated, the same per-
vdev TRIM thread model and locking, and the same basic CLI for
a consistent user experience. The core difference is that
instead of writing a pattern it will issue UNMAP/TRIM commands
for those extents.
The zio pipeline was updated to accommodate this by adding a new
ZIO_TYPE_TRIM type and associated spa taskq. This new type makes
is straight forward to add the platform specific TRIM/UNMAP calls
to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are
handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs.
This makes it possible to largely avoid changing the pipieline,
one exception is that TRIM zio's may exceed the 16M block size
limit since they contain no data.
In addition to the manual `zpool trim` command, a background
automatic TRIM was added and is controlled by the 'autotrim'
property. It relies on the exact same infrastructure as the
manual TRIM. However, instead of relying on the extents in a
metaslab's ms_allocatable range tree, a ms_trim tree is kept
per metaslab. When 'autotrim=on', ranges added back to the
ms_allocatable tree are also added to the ms_free tree. The
ms_free tree is then periodically consumed by an autotrim
thread which systematically walks a top level vdev's metaslabs.
Since the automatic TRIM will skip ranges it considers too small
there is value in occasionally running a full `zpool trim`. This
may occur when the freed blocks are small and not enough time
was allowed to aggregate them. An automatic TRIM and a manual
`zpool trim` may be run concurrently, in which case the automatic
TRIM will yield to the manual TRIM.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Contributions-by: Tim Chase <tim@chase2k.com>
Contributions-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8419Closes#598
This patch fixes a few issues when detecting which kernel_fpu functions
are available.
- Use kernel_fpu_begin() if it's exported on newer kernels.
- Use ZFS_LINUX_TRY_COMPILE_SYMBOL() to choose the right kernel_fpu
function when using --enable-linux-builtin.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8259Closes#8363
Improve the autoconf code for finding libtirpc and do not assume the
headers are in /usr/include/tirpc.
Also remove this assumption from the `rpc/xdr.h` header in libspl and
use the same `#include_next` mechanism that is used for other libspl
headers.
Include pkg.m4 from pkg-config in config/ for PKG_CHECK_MODULES(), the
file license allows this.
Include ax_save_flags.m4 and ax_restore_flags.m4 from autoconf-archive,
the file licenses are compatible. Use the 2012 versions so as not rely
on a more recent autoconf feature AS_VAR_COPY(), which breaks some build
slaves.
Add new macro library `config/find_system_library.m4` which defines the
FIND_SYSTEM_LIBRARY() macro which is a convenience wrapper over using
PKG_CHECK_MODULES() with a fallback to standard library locations and
some sanity checks.
The parameters are:
```
FIND_SYSTEM_LIBRARY(VARIABLE-PREFIX, MODULE, HEADER, HEADER-PREFIXES,
LIBRARY, FUNCTIONS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
```
`HEADER-PREFIXES` and `FUNCTIONS` are comma-separated m4 lists.
For libtirpc we are using:
```
FIND_SYSTEM_LIBRARY(LIBTIRPC, [libtirpc], [rpc/xdr.h], [tirpc], [tirpc],
[xdrmem_create], [], [...])
```
The headers are first checked for without the prefixes and then with.
This system works with pkg-config and falls back on checking standard
header/library locations, it can be easily overridden by the user by
setting the `PREFIX_CFLAGS` and `PREFIX_LIBS` variables which are
automatically added to the `./configure --help` output.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Closes#7422Closes#8313
The Linux 5.0 kernel updated the bio_set_dev() macro so it calls the
GPL-only bio_associate_blkg() symbol thus inadvertently converting
the entire macro. Provide a minimal version which always assigns the
request queue's root_blkg to the bio.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8287
The 5.0 kernel no longer exports the functions we need to do vector
(SSE/SSE2/SSE3/AVX...) instructions. Disable vector-based checksum
algorithms when building against those kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8259
totalram_pages() was converted to an atomic variable in 5.0:
https://patchwork.kernel.org/patch/10652795/
Its value should now be read though the totalram_pages() helper
function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8263
access_ok no longer needs a 'type' parameter in the 5.0 kernel.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8261
Newer kernels remove current_kernel_time64(). Use
ktime_get_coarse_real_ts64() in its place.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8258
Almost all of the Python code in the respository has been updated
to be compatibile with Python 2.6, Python 3.4, or newer. The only
exceptions are arc_summery3.py which requires Python 3, and pyzfs
which requires at least Python 2.7. This allows us to maintain a
single version of the code and support most default versions of
python. This change does the following:
* Sets the default shebang for all Python scripts to python3. If
only Python 2 is available, then at install time scripts which
are compatible with Python 2 will have their shebangs replaced
with /usr/bin/python. This is done for compatibility until
Python 2 goes end of life. Since only the installed versions
are changed this means Python 3 must be installed on the system
for test-runner when testing in-tree.
* Added --with-python=<2|3|3.4,etc> configure option which sets
the PYTHON environment variable to target a specific python
version. By default the newest installed version of Python
will be used or the preferred distribution version when
creating pacakges.
* Fixed --enable-pyzfs configure checks so they are run when
--enable-pyzfs=check and --enable-pyzfs=yes.
* Enabled pyzfs for Python 3.4 and newer, which is now supported.
* Renamed pyzfs package to python<VERSION>-pyzfs and updated to
install in the appropriate site location. For example, when
building with --with-python=3.4 a python34-pyzfs will be
created which installs in /usr/lib/python3.4/site-packages/.
* Renamed the following python scripts according to the Fedora
guidance for packaging utilities in /bin
- dbufstat.py -> dbufstat
- arcstat.py -> arcstat
- arc_summary.py -> arc_summary
- arc_summary3.py -> arc_summary3
* Updated python-cffi package name. On CentOS 6, CentOS 7, and
Amazon Linux it's called python-cffi, not python2-cffi. For
Python3 it's called python3-cffi or python3x-cffi.
* Install one version of arc_summary. Depending on the version
of Python available install either arc_summary2 or arc_summary3
as arc_summary. The user output is only slightly different.
Reviewed-by: John Ramsden <johnramsden@riseup.net>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8096
This partially reverts commit 8005ca4 by moving the strlcat()
and strlcpy() compatibility implementations back to their original
location.
In addition, these two functions were added to the AC_CHECK_FUNCS
macro. When these functions are available from the C library,
HAVE_STRLCAT and HAVE_STRLCPY will be defined and library version
used. Otherwise the compatibility version is built.
Reviewed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#8157Closes#8202
Macro ZFS_MINOR, introduced in commit a6cc9756 to record the chosen
static minor number for /dev/zfs, conflicts with an existing macro
in Lustre. The lustre macro (along with _MAJOR, _PATCH, _FIX) is
used to record the zfsonlinux version Lustre is being built against.
Since the Lustre macro came first, and is used in past versions of
lustre at least going back to 2.10, it makes sense to rename the
macro in ZFS instead of doing so in Lustre which would require
backporting the patch.
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#8195
This fixes the build when cross-compiling, where the preprocessor might
be prefixed.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Closes#8180
Ensure that the _unitdir, _presetdir, _modulesloaddir, and
_systemdgeneratordir macros are always defined. If not set
them to the expected default values. Pass all of these options
to ./configure and package the resulting files in those locations.
Additionally, set __brp_mangle_shebangs_exclude_from until the
conversion to Python 3 is complete so they may be built cleanly
under mock.
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7567Closes#8119
When handling a 32-bit statfs() system call the returned fields,
although 64-bit in the kernel, must be limited to 32-bits or an
EOVERFLOW error will be returned.
This is less of an issue for block counts since the default
reported block size in 128KiB. But since it is possible to
set a smaller block size, these values will be scaled as
needed to fit in a 32-bit unsigned long.
Unlike most other filesystems the total possible file counts
are more likely to overflow because they are calculated based
on the available free space in the pool. In order to prevent
this the reported value must be capped at 2^32-1. This is
only for statfs(2) reporting, there are no changes to the
internal ZFS limits.
Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7927Closes#7122Closes#7937
Direct IO via the O_DIRECT flag was originally introduced in XFS by
IRIX for database workloads. Its purpose was to allow the database
to bypass the page and buffer caches to prevent unnecessary IO
operations (e.g. readahead) while preventing contention for system
memory between the database and kernel caches.
On Illumos, there is a library function called directio(3C) that
allows user space to provide a hint to the file system that Direct IO
is useful, but the file system is free to ignore it. The semantics
are also entirely a file system decision. Those that do not
implement it return ENOTTY.
Since the semantics were never defined in any standard, O_DIRECT is
implemented such that it conforms to the behavior described in the
Linux open(2) man page as follows.
1. Minimize cache effects of the I/O.
By design the ARC is already scan-resistant which helps mitigate
the need for special O_DIRECT handling. Data which is only
accessed once will be the first to be evicted from the cache.
This behavior is in consistent with Illumos and FreeBSD.
Future performance work may wish to investigate the benefits of
immediately evicting data from the cache which has been read or
written with the O_DIRECT flag. Functionally this behavior is
very similar to applying the 'primarycache=metadata' property
per open file.
2. O_DIRECT _MAY_ impose restrictions on IO alignment and length.
No additional alignment or length restrictions are imposed.
3. O_DIRECT _MAY_ perform unbuffered IO operations directly
between user memory and block device.
No unbuffered IO operations are currently supported. In order
to support features such as transparent compression, encryption,
and checksumming a copy must be made to transform the data.
4. O_DIRECT _MAY_ imply O_DSYNC (XFS).
O_DIRECT does not imply O_DSYNC for ZFS. Callers must provide
O_DSYNC to request synchronous semantics.
5. O_DIRECT _MAY_ disable file locking that serializes IO
operations. Applications should avoid mixing O_DIRECT
and normal IO or mmap(2) IO to the same file. This is
particularly true for overlapping regions.
All I/O in ZFS is locked for correctness and this locking is not
disabled by O_DIRECT. However, concurrently mixing O_DIRECT,
mmap(2), and normal I/O on the same file is not recommended.
This change is implemented by layering the aops->direct_IO operations
on the existing AIO operations. Code already existed in ZFS on Linux
for bypassing the page cache when O_DIRECT is specified.
References:
* http://xfs.org/docs/xfsdocs-xml-dev/XFS_User_Guide/tmp/en-US/html/ch02s09.html
* https://blogs.oracle.com/roch/entry/zfs_and_directio
* https://ext4.wiki.kernel.org/index.php/Clarifying_Direct_IO's_Semantics
* https://illumos.org/man/3c/directio
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#224Closes#7823
- Add two new module parameters to icp (icp_aes_impl, icp_gcm_impl)
that control the crypto implementation. At the moment there is a
choice between generic and aesni (on platforms that support it).
- This enables support for AES-NI and PCLMULQDQ-NI on AMD Family
15h (bulldozer) and newer CPUs (zen).
- Modify aes_key_t to track what implementation it was generated
with as key schedules generated with various implementations
are not necessarily interchangable.
Reviewed by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Nathaniel R. Lewis <linux.robotdude@gmail.com>
Closes#7102Closes#7103
While the autoexpand property may seem like a small feature it
depends on a significant amount of system infrastructure. Enough
of that infrastructure is now in place that with a few modifications
for Linux it can be supported.
Auto-expand works as follows; when a block device is modified
(re-sized, closed after being open r/w, etc) a change uevent is
generated for udev. The ZED, which is monitoring udev events,
passes the change event along to zfs_deliver_dle() if the disk
or partition contains a zfs_member as identified by blkid.
From here the device is matched against all imported pool vdevs
using the vdev_guid which was read from the label by blkid. If
a match is found the ZED reopens the pool vdev. This re-opening
is important because it allows the vdev to be briefly closed so
the disk partition table can be re-read. Otherwise, it wouldn't
be possible to report the maximum possible expansion size.
Finally, if the property autoexpand=on a vdev expansion will be
attempted. After performing some sanity checks on the disk to
verify that it is safe to expand, the primary partition (-part1)
will be expanded and the partition table updated. The partition
is then re-opened (again) to detect the updated size which allows
the new capacity to be used.
In order to make all of the above possible the following changes
were required:
* Updated the zpool_expand_001_pos and zpool_expand_003_pos tests.
These tests now create a pool which is layered on a loopback,
scsi_debug, and file vdev. This allows for testing of non-
partitioned block device (loopback), a partition block device
(scsi_debug), and a file which does not receive udev change
events. This provided for better test coverage, and by removing
the layering on ZFS volumes there issues surrounding layering
one pool on another are avoided.
* zpool_find_vdev_by_physpath() updated to accept a vdev guid.
This allows for matching by guid rather than path which is a
more reliable way for the ZED to reference a vdev.
* Fixed zfs_zevent_wait() signal handling which could result
in the ZED spinning when a signal was not handled.
* Removed vdev_disk_rrpart() functionality which can be abandoned
in favor of kernel provided blkdev_reread_part() function.
* Added a rwlock which is held as a writer while a disk is being
reopened. This is important to prevent errors from occurring
for any configuration related IOs which bypass the SCL_ZIO lock.
The zpool_reopen_007_pos.ksh test case was added to verify IO
error are never observed when reopening. This is not expected
to impact IO performance.
Additional fixes which aren't critical but were discovered and
resolved in the course of developing this functionality.
* Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for
ZFS volumes. This is as good as a unique physical path, while the
volumes are not used in the test cases anymore for other reasons
this improvement was included.
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#120Closes#2437Closes#5771Closes#7366Closes#7582Closes#7629
The blk_queue_stackable() function was replaced in the 4.14 kernel
by queue_is_rq_based(), commit torvalds/linux@5fdee212. This change
resulted in the default elevator being used which can negatively
impact performance.
Rather than adding additional compatibility code to detect the
new interface unconditionally attempt to set the elevator. Since
we expect this to fail for block devices without an elevator the
error message has been moved in to zfs_dbgmsg().
Finally, it was observed that the elevator_change() was removed
from the 4.12 kernel, commit torvalds/linux@c033269. Update the
comment to clearly specify which are expected to export the
elevator_change() symbol.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7645
Commit torvalds/linux@95582b0 changes the inode i_atime, i_mtime,
and i_ctime members form timespec's to timespec64's to make them
2038 safe. As part of this change the current_time() function was
also updated to return the timespec64 type.
Resolve this issue by introducing a new inode_timespec_t type which
is defined to match the timespec type used by the inode. It should
be used when working with inode timestamps to ensure matching types.
The timestruc_t type under Illumos was used in a similar fashion but
was specified to always be a timespec_t. Rather than incorrectly
define this type all timespec_t types have been replaced by the new
inode_timespec_t type.
Finally, the kernel and user space 'sys/time.h' headers were aligned
with each other. They define as appropriate for the context several
constants as macros and include static inline implementation of
gethrestime(), gethrestime_sec(), and gethrtime().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7643
Added support for the bops->check_events() interface which was
added in the 2.6.38 kernel to replace bops->media_changed().
Fully implementing this functionality allows the volume resize
code to rely on revalidate_disk(), which is the preferred
mechanism, and removes the need to use check_disk_size_change().
In order for bops->check_events() to lookup the zvol_state_t
stored in the disk->private_data the zvol_state_lock needs to
be held. Since the check events interface may poll the mutex
has been converted to a rwlock for better concurrently. The
rwlock need only be taken as a writer in the zvol_free() path
when disk->private_data is set to NULL.
The configure checks for the block_device_operations structure
were consolidated in a single kernel-block-device-operations.m4
file.
The ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS configure checks
and assoicated dead code was removed. This interface was added
to the 2.6.28 kernel which predates the oldest supported 2.6.32
kernel and will therefore always be available.
Updated maximum Linux version in META file. The 4.17 kernel
was released on 2018-06-03 and ZoL is compatible with the
finalized kernel.
Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7611
zpool and zed place scripts in subdirectories of libexecdir. Some
distributions locate architecture independent scripts in other locations
(e.g. Debian). To avoid these paths getting out of sync, centralize the
definitions.
Build zfs-test's default.cfg by Makefile. Use the new directory
logic building tests/zfs-tests/include/default.cfg.in.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#7597
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.
Build system and packaging:
* Renamed SPL_* autoconf m4 macros to ZFS_*.
* Removed redundant SPL_* autoconf m4 macros.
* Updated the RPM spec files to remove SPL package dependency.
* The zfs package obsoletes the spl package, and the zfs-kmod
package obsoletes the spl-kmod package.
* The zfs-kmod-devel* packages were updated to add compatibility
symlinks under /usr/src/spl-x.y.z until all dependent packages
can be updated. They will be removed in a future release.
* Updated copy-builtin script for in-kernel builds.
* Updated DKMS package to include the spl.ko.
* Updated stale AUTHORS file to include all contributors.
* Updated stale COPYRIGHT and included the SPL as an exception.
* Renamed README.markdown to README.md
* Renamed OPENSOLARIS.LICENSE to LICENSE.
* Renamed DISCLAIMER to NOTICE.
Required code changes:
* Removed redundant HAVE_SPL macro.
* Removed _BOOT from nvpairs since it doesn't apply for Linux.
* Initial header cleanup (removal of empty headers, refactoring).
* Remove SPL repository clone/build from zimport.sh.
* Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
to build issues when forcing C99 compilation.
* Replaced legacy ACCESS_ONCE with READ_ONCE.
* Include needed headers for `current` and `EXPORT_SYMBOL`.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes#7556
Merge a minimal version of the zfsonlinux/spl repository in to the
zfsonlinux/zfs repository. Care was taken to prevent file conflicts
when merging and to preserve the spl repository history. The spl
kernel module remains under the GPLv2 license as documented by the
additional THIRDPARTYLICENSE.gplv2 file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This commit removes everything from the repository except the core
SPL implementation for Linux. Those files which remain have been
moved to non-conflicting locations to facilitate the merge.
The README.md and associated files have been updated accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The --{en,dis}able-pyzfs check is backwards. Fix that.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: DHE <git@dehacked.net>
Closes#7493
Always invoke the SPL_AC_DEBUG* macro's when running configure
so RPM_DEFINE_COMMON is correctly expanded. A similar change
was already applied to ZFS.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#703
As of RHEL 7.5 the mainline fops.iterate() method was added to
the file_operations structure and is correctly detected by the
configure script.
Normally this is what we want, but in order to maintain KABI
compatibility the RHEL change additionally does the following:
* Requires that callers intending to use this extended interface
set the FMODE_KABI_ITERATE flag on the file structure when
opening the directory.
* Adds the fops.iterate() method to the end of the structure,
without removing fops.readdir().
This change updates the configure check to ignore the RHEL 7.5+
variant of fops.iterate() when detected. Instead fallback to
the fops.readdir() interface which will be available.
Finally, add the 'zpl_' prefix to the directory context wrappers
to avoid colliding with the kernel provided symbols when both
the fops.iterate() and fops.readdir() are provided by the kernel.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7460Closes#7463
This commit introduces several changes:
* Update LICENSE and project information
* Give a good PEP8 talk to existing Python source code
* Add RPM/DEB packaging for pyzfs
* Fix some outstanding issues with the existing pyzfs code caused by
changes in the ABI since the last time the code was updated
* Integrate pyzfs Python unittest with the ZFS Test Suite
* Add missing libzfs_core functions: lzc_change_key,
lzc_channel_program, lzc_channel_program_nosync, lzc_load_key,
lzc_receive_one, lzc_receive_resumable, lzc_receive_with_cmdprops,
lzc_receive_with_header, lzc_reopen, lzc_send_resume, lzc_sync,
lzc_unload_key, lzc_remap
Note: this commit slightly changes zfs_ioc_unload_key() ABI. This allow
to differentiate the case where we tried to unload a key on a
non-existing dataset (ENOENT) from the situation where a dataset has
no key loaded: this is consistent with the "change" case where trying
to zfs_ioc_change_key() from a dataset with no key results in EACCES.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7230
Currently mounting an already mounted zfs dataset results in an
error, whereas it is typically allowed with other filesystems.
This causes some bad interactions with mount namespaces. Take
this sequence for example:
- Create a dataset
- Create a snapshot of the dataset
- Create a clone of the snapshot
- Create a new mount namespace
- Rename the original dataset
The rename results in unmounting and remounting the clone in the
original mount namespace, however the remount fails because the
dataset is still mounted in the new mount namespace. (Note that
this means the mount in the new mount namespace is never being
unmounted, so perhaps the unmount/remount of the clone isn't
actually necessary.)
The problem here is a result of the way mounting is implemented
in the kernel module. Since it is not mounting block devices it
uses mount_nodev() instead of the usual mount_bdev(). However,
mount_nodev() is written for filesystems for which each mount is
a new instance (i.e. a new super block), and zfs should be able
to detect when a mount request can be satisfied using an existing
super block.
Change zpl_mount() to call sget() directly with it's own test
callback. Passing the objset_t object as the fs data allows
checking if a superblock already exists for the dataset, and in
that case we just need to return a new reference for the sb's
root dentry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Closes#5796Closes#7207
zfs-mount-generator implements the "systemd generator" protocol,
producing systemd.mount units from the cached outputs of zfs list,
during early boot, integrating with systemd.
Each pool has an indpendent cache of the command
zfs list -H -oname,mountpoint,canmount -tfilesystem -r $pool
which is kept synchronized by the ZEDLET
history_event-zfs-list-cacher.sh
Datasets not in the cache will be loaded later in the boot process by
zfs-mount.service, including pools without a cache.
Among other things, this allows for complex mount hierarchies.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#7329
Calling uiomove() in mappedread() under the page lock can result
in a deadlock if the user space page needs to be faulted in.
Resolve the issue by dropping the page lock before the uiomove().
The inode range lock protects against concurrent updates via
zfs_read() and zfs_write().
Reviewed-by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7335Closes#7339
RHEL/CentOS 6 supports sys/xattr.h eliminating the need for
libattr-devel as a dependency.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#7344Closes#7351
If you run ./configure --with-config=srpm, it will not trigger
the user m4 scripts to populate the dracut and udev directories.
This causes a build error on Fedora 28. Make the dracut and
udev lines conditional to get around this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7326Closes#7328
Historically a dynamic misc minor number was registered for the
/dev/zfs device in order to prevent minor number collisions. This
was fine but it prevented us from being able to use the kernel
module auto-loaded which requires a known reserved value.
Resolve this issue by adding a configure test to find an available
misc minor number which can then be used in MODULE_ALIAS_MISCDEV at
build time. By adding this alias the zfs kmod is added to the list
of known static-nodes and the systemd-tmpfiles-setup-dev service
will create a /dev/zfs character device at boot time.
This in turn allows us to update the 90-zfs.rules file to make it
aware this is a static node. The upshot of this is that whenever
a process (zpool, zfs, zed) opens the /dev/zfs the kmods will be
automatic loaded. This even works for unprivileged users so there
is no longer a need to manually load the modules at boot time.
As an additional bonus the zed now no longer needs to start after
the zfs-import.service since it will trigger the module load.
In the unlikely event the minor number we selected conflicts with
another out of tree unregistered minor number the code falls back
to dynamically allocating it. In this case the modules again
must be manually loaded.
Note that due to the change in the method of registering the minor
number the zimport.sh test case may incorrectly fail when the
static node for the installed packages is created instead of the
dynamic one. This issue will only transiently impact zimport.sh
for this single commit when we transition and are mixing and
matching methods.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes#7287
With rpm-software-management/rpm@5e94633 a package version containing
invalid characters (most commonly a double '-') causes the kmod package
generation to terminate with an error. This change takes advantage of
the newly introduced rpm macro "_wrong_version_format_terminate_build"
to allow kmod packages to be built.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7284
With rpm-software-management/rpm@5e94633 a package version containing
invalid characters (most commonly a double '-') causes the kmod package
generation to terminate with an error. This change takes advantage of
the newly introduced rpm macro "_wrong_version_format_terminate_build"
to allow kmod packages to be built.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#691
Change file related checks to use user namespaces and make
sure involved uids/gids are mappable in the current
namespace.
Note that checks without file ownership information will
still not take user namespaces into account, as some of
these should be handled via 'zfs allow' (otherwise root in a
user namespace could issue commands such as `zpool export`).
This also adds an initial user namespace regression test
for the setgid bit loss, with a user_ns_exec helper usable
in further tests.
Additionally, configure checks for the required user
namespace related features are added for:
* ns_capable
* kuid/kgid_has_mapping()
* user_ns in cred_t
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Closes#6800Closes#7270
As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk()
is now get_disk_and_module(). Add a configure check to determine
if we need to use get_disk_and_module().
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#7264
Provide infrastructure to auto-configure to enum and API changes in the
global page stats used for our free memory calculations.
arc_free_memory has been broken since an API change in Linux v3.14:
2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node
2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node
vmstats
These commits moved some of global_page_state() into
global_node_page_state(). The API change was particularly egregious as,
instead of breaking the old code, it silently did the wrong thing and we
continued using global_page_state() where we should have been using
global_node_page_state(), thus indexing into the wrong array via
NR_SLAB_RECLAIMABLE et al.
There have been further API changes along the way:
2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to
node counters
2017-09-06 v4.14 c41f012a mm: rename global_page_state to
global_zone_page_state
...and various (incomplete, as it turns out) attempts to accomodate
these changes in ZoL:
2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats
2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc
2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc
The config infrastructure provided here resolves these issues going back
to the original API change in v3.14 and is robust against further Linux
changes in this area.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#7170
Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test()
on older kernels. https://lwn.net/Articles/714974/
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #7179Closes: #7211
1. With various (debug and/or tracing?) kernel options enabled it's
possible for 'struct inode' and 'struct super_block' to exceed the
default frame size, leaving errors like this in config.log:
build/conftest.c:116:1: error: the frame size of 1048 bytes is larger
than 1024 bytes [-Werror=frame-larger-than=]
Fix this by removing the frame size warning for config checks
2. Without the correct headers included, it's possible for declarations
to be missed, leaving errors like this in the config.log:
build/conftest.c:131:14: error: ‘struct nameidata’ declared inside
parameter list [-Werror]
Fix this by adding appropriate headers.
Note: Both these issues can result in silent config failures because
the compile failure is taken to mean "this option is not supported by
this kernel" rather than "there's something wrong with the config
test". This can lead to something merely annoying (compile failures) to
something potentially serious (miscompiled or misused kernel primitives
or functions). E.g. the fixes included here resulted in these
additional defines in zfs_config.h with linux v4.14.19:
Also, drive-by whitespace fixes in config/* files which don't mention
"GNU" (those ones look to be imported from elsewhere so leave them
alone).
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#7169
A new interface was added to manipulate the version field of an
inode. Add a inode_set_iversion() wrapper for older kernels and
use the new interface when available.
The i_version field was dropped from the trace point due to the
switch to an atomic64_t i_version type.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7148
Split the kernel interface configure checks in to seperate m4
macro files. This is intended to facilitate moving the spl
source code in to the zfs repository.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#682
The distribution provided architecture specific RPM macro files
for x86_64 and other architectures on Debian/Ubuntu specify the
wrong default libdir install location. When building deb packages
override _lib with the correct location.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7083Closes#7101
Add missing helper function cv_timedwait_io(), it should be used
when waiting on IO with a specified timeout.
Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#674
When building packages on Debian-based systems specify the target
architecture used by 'alien' to convert .rpm packages into .deb: this
avoids detecting an incorrect value which results in the following
errors:
<package>.aarch64.rpm is for architecture aarch64 ; the package cannot be built on this system
<package>.armv7l.rpm is for architecture armel ; the package cannot be built on this system
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#7046Closes#7058
When building packages on Debian-based systems specify the target
architecture used by 'alien' to convert .rpm packages into .deb: this
avoids detecting an incorrect value which results in the following
errors:
<package>.aarch64.rpm is for architecture aarch64 ; the package cannot be built on this system
<package>.armv7l.rpm is for architecture armel ; the package cannot be built on this system
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes zfsonlinux/zfs#7046
Closes#678
When --enable-asan is provided to configure then build all user
space components with fsanitize=address. For kernel support
use the Linux KASAN feature instead.
https://github.com/google/sanitizers/wiki/AddressSanitizer
When using gcc version 4.8 any test case which intentionally
generates a core dump will fail when using --enable-asan.
The default behavior is to disable core dumps and only newer
versions allow this behavior to be controled at run time with
the ASAN_OPTIONS environment variable.
Additionally, this patch includes some build system cleanup.
* Rules.am updated to set the minimum AM_CFLAGS, AM_CPPFLAGS,
and AM_LDFLAGS. Any additional flags should be added on a
per-Makefile basic. The --enable-debug and --enable-asan
options apply to all user space binaries and libraries.
* Compiler checks consolidated in always-compiler-options.m4
and renamed for consistency.
* -fstack-check compiler flag was removed, this functionality
is provided by asan when configured with --enable-asan.
* Split DEBUG_CFLAGS in to DEBUG_CFLAGS, DEBUG_CPPFLAGS, and
DEBUG_LDFLAGS.
* Moved default kernel build flags in to module/Makefile.in and
split in to ZFS_MODULE_CFLAGS and ZFS_MODULE_CPPFLAGS. These
flags are set with the standard ccflags-y kbuild mechanism.
* -Wframe-larger-than checks applied only to binaries or
libraries which include source files which are built in
both user space and kernel space. This restriction is
relaxed for user space only utilities.
* -Wno-unused-but-set-variable applied only to libzfs and
libzpool. The remaining warnings are the result of an
ASSERT using a variable when is always declared.
* -D_POSIX_PTHREAD_SEMANTICS and -D__EXTENSIONS__ dropped
because they are Solaris specific and thus not needed.
* Ensure $GDB is defined as gdb by default in zloop.sh.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7027
In ZFSOnLinux, our sources and build system are self contained such that
we do not need to make changes to the Linux kernel sources. Reiser4 on
the other hand exists solely as a kernel tree patch and opts to make
changes to the kernel rather than adapt to it. After Linux 4.1 made a
VFS change that replaced new_sync_read with do_sync_read, Reiser4's
maintainer decided to modify the kernel VFS to export the old function.
This caused our autotools check to misidentify the kernel API as
predating Linux 4.1 on kernels that have been patched with Reiser4
support, which breaks our build.
Reiser4 really should be patched to stop doing this, but lets modify our
check to be more strict to help the affected users of both filesystems.
Also, we were not checking the types of arguments and return value of
new_sync_read() and new_sync_write() . Lets fix that too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#6241Closes#7021
Use timer_setup() macro and new timeout function definition.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#670Closes#671
These changes propagate the "--with-systemd" configure option to the
RPM spec file, allowing Debian-based distributions to package
systemd-related files.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#6591Closes#6963
Suppress incorrect warnings from versions of objtool which are not
aware of x86 EVEX prefix instructions used for AVX512.
module/zfs/vdev_raidz_math_avx512bw.o: warning:
objtool: <func+offset>: can't find jump dest instruction at .text
Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6928
The kernel_read & kernel_write functions have always wrapped the
vfs_read & vfs_write functions respectively. However, they could
not be used by vn_rdwr() since the offset wasn't passed as a
pointer. This prevented us from being able to properly update
the file offset.
Linux 4.14 unexported vfs_read & vfs_write but also changed the
signature of kernel_read & kernel_write to provide the needed
functionality. Use these updated functions when available.
Reviewed-by: Pritam Baral <pritam@pritambaral.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#656Closes#667
Both vn_rename and vn_remove have been historically problematic
to implement reliably. Rather than fixing them yet again they
are being removed.
Reviewed-by: Arkadiusz Bubala <arkadiusz.bubala@open-e.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#648Closes#661
Support integration with new QAT products: Intel(R) C62x Chipset,
or Atom(R) C3000 Processor Product Family SoC:
1. Detect new file name in auto-conf.
2. Change MAX_INSTANCES to 48.
3. Change "num_inst" to U16 to clean a build warning.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#6767
* config/deb.am: Enable building DKMS packages for Debian
* rpm/generic/zfs-dkms.spec.in: Adjust spec to be Debian-compatible
* Condition kernel-devel Req to RPM distros
* Adjust the DKMS Req to have a minimum of a version only
* Ensure that --rpm_safe_upgrade isn't used on non-RPM distros
* config/deb.am: Drop CONFIG_KERNEL and CONFIG_USER guards
* Makefile.am: Add pkg-dkms target
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Neal Gompa <ngompa@datto.com>
Closes#6044Closes#6731
* config/deb.am: Enable building DKMS packages for Debian
* rpm/generic/spl-dkms.spec.in: Adjust spec to be Debian-compatible
* Condition kernel-devel Requires to RPM distros
* Ensure that --rpm_safe_upgrade isn't used on non-RPM distros
* config/deb.am: Drop CONFIG_KERNEL and CONFIG_USER guards
* Makefile.am: Add pkg-dkms target
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Neal Gompa <ngompa@datto.com>
Closes#657
* PBKDF2 implementation changed to OpenSSL implementation.
* HKDF implementation moved to its own file and tests
added to ensure correctness.
* Removed libzfs's now unnecessary dependency on libzpool
and libicp.
* Ztest can now create and test encrypted datasets. This is
currently disabled until issue #6526 is resolved, but
otherwise functions as advertised.
* Several small bug fixes discovered after enabling ztest
to run on encrypted datasets.
* Fixed coverity defects added by the encryption patch.
* Updated man pages for encrypted send / receive behavior.
* Fixed a bug where encrypted datasets could receive
DRR_WRITE_EMBEDDED records.
* Minor code cleanups / consolidation.
Signed-off-by: Tom Caputi <tcaputi@datto.com>
When --enable-code-coverage is provided it should not result
in NDEBUG being defined. This is controlled by --enable-debug.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6674
This change adds support for a new option that can be passed to the
configure script: "--enable-code-coverage". Further, the "--enable-gcov"
option has been removed, as this new option provides the same
functionality (plus more).
When using this new option the following make targets are available:
* check-code-coverage
* code-coverage-capture
* code-coverage-clean
Note: these make targets can only be run from the root of the project.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#6670
generic_start_io_acct/generic_end_io_acct in the master
branch of the linux kernel requires that the request_queue
be provided.
Move the logic from freemem in the spl to arc_free_memory
in arc.c. Do this so we can take advantage of global_page_state
interface checks in zfs.
Upstream kernel replaced struct block_device with
struct gendisk in struct bio. Determine if the
function bio_set_dev exists during configure
and have zfs use that if it exists.
bio_set_dev https://github.com/torvalds/linux/commit/74d4699
global_node_page_state https://github.com/torvalds/linux/commit/75ef718
io acct https://github.com/torvalds/linux/commit/d62e26b
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6635
When functions are inlined, it can make the system much more difficult
to instrument using tools such as ftrace, BPF, crash, etc. Thus, to aid
development and increase the system's observability, when the
"--enable-debuginfo" flag is specified, the "-fno-inline" compilation
option will be used for both userspace and kernel modules.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes#6605
* Add configure option to enable gcov analysis.
* Includes a few minor ctime fixes.
* Add codecov.yml configuration.
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6642
Inspection of a Ubuntu 14.04 x64 system revealed that the config file
used to build the kernel image differs from the config file used to
build kernel modules by the presence of CONFIG_DEBUG_INFO=y:
This in itself is insufficient to show that the kernel is built with
debuginfo, but a cursory analysis of the debuginfo provided and the
size of the kernel strongly suggests that it was built with
CONFIG_DEBUG_INFO=y while the modules were not. Installing
linux-image-$(uname -r)-dbgsym had no obvious effect on the debuginfo
provided by either the modules or the kernel.
The consequence is that issue reports from distributions such as Ubuntu
and its derivatives build kernel modules without debuginfo contain
nonsensical backtraces. It is therefore desireable to force generation
of debuginfo, so we implement --enable-debuginfo. Since the build system
can build both userspace components and kernel modules, the generic
--enable-debuginfo option will force debuginfo for both. However, it
also supports --enable-debuginfo=kernel and --enable-debuginfo=user for
finer grained control.
Enabling debuginfo for the kernel modules works by injecting
CONFIG_DEBUG_INFO=y into the make environment. This is enables
generation of debuginfo by the kernel build systems on all Linux
kernels, but the build environment is slightly different int hat
CONFIG_DEBUG_INFO has not been in the CPP. Adding -DCONFIG_DEBUG_INFO
would fix that, but it would also cause build failures on kernels where
CONFIG_DEBUG_INFO=y is already set. That would complicate its use in
DKMS environments that support a range of kernels and is therefore
undesireable. We could write a compatibility shim to enable
CONFIG_DEBUG_INFO only when it is explicitly disabled, but we forgo
doing that because it is unnecessary. Nothing in ZoL or the kernel uses
CONFIG_DEBUG_INFO in the CPP at this time and that is unlikely to
change.
Enabling debuginfo for the userspace components is done by injecting -g
into CPPFLAGS. This is not necessary because the build system honors the
environment's CPPFLAGS by appending them to the actual CPPFLAGS used,
but it is supported for consistency.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Closes#2734
Currently, bogus options to --enable-debug become --disable-debug. That
means that passing --enable-debug=true is analogous to --disable-debug,
but the result is counterintuitive. We switch to AS_CASE to allow us to
fail when given a bogus option.
Also, we modify the text printed to clarify that --enable-debug enables
assertions.
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Closes#2734
vm_node_stat must be used instead of vm_zone_stat. Unfortunately the
old code still compiles potentially leading to silent failure of
arc_evictable_memory()
AKAMAI: CR 3816601: Regression in zfs dropcache test
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Closes#6528
It is just plain unsafe to peek inside in-kernel
mutex structure and make assumptions about what kernel
does with those internal fields like owner.
Kernel is all too happy to stop doing the expected things
like tracing lock owner once you load a tainted module
like spl/zfs that is not GPL.
As such you will get instant assertion failures like this:
VERIFY3(((*(volatile typeof((&((&zo->zo_lock)->m_mutex))->owner) *)&
((&((&zo->zo_lock)->m_mutex))->owner))) ==
((void *)0)) failed (ffff88030be28500 == (null))
PANIC at zfs_onexit.c:104:zfs_onexit_destroy()
Showing stack for process 3626
CPU: 0 PID: 3626 Comm: mkfs.lustre Tainted: P OE ------------ 3.10.0-debug #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
dump_stack+0x19/0x1b
spl_dumpstack+0x44/0x50 [spl]
spl_panic+0xbf/0xf0 [spl]
zfs_onexit_destroy+0x17c/0x280 [zfs]
zfsdev_release+0x48/0xd0 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Closes#639Closes#632
This reverts commit d89616fda8 which
introduced some build failures which need to be resolved before
this can be merged.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #633
It is just plain unsafe to peek inside in-kernel
mutex structure and make assumptions about what kernel
does with those internal fields like owner.
Kernel is all too happy to stop doing the expected things
like tracing lock owner once you load a tainted module
like spl/zfs that is not GPL.
As such you will get instant assertion failures like this:
VERIFY3(((*(volatile typeof((&((&zo->zo_lock)->m_mutex))->owner) *)&
((&((&zo->zo_lock)->m_mutex))->owner))) ==
((void *)0)) failed (ffff88030be28500 == (null))
PANIC at zfs_onexit.c:104:zfs_onexit_destroy()
Showing stack for process 3626
CPU: 0 PID: 3626 Comm: mkfs.lustre Tainted: P OE ------------ 3.10.0-debug #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
dump_stack+0x19/0x1b
spl_dumpstack+0x44/0x50 [spl]
spl_panic+0xbf/0xf0 [spl]
zfs_onexit_destroy+0x17c/0x280 [zfs]
zfsdev_release+0x48/0xd0 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Closes#632Closes#633
The previous autoconf test for the presence of super_setup_bdi_name()
uses an invocation with an incorrect type signature, producing a
warning by the compiler when the test is run. This gets elevated to an
error when compiling with -Werror=format-security, causing autoconf to
falsely infer super_setup_bdi_name() is not present. This updates the
testing code to match the invocation used in
include/linux/vfs_compat.h.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Justin Bedo <cu@cua0.org>
Closes#6398
Commit torvalds/linux@4e4cbee9. The bio->bi_error field was
replaced with bio->bi_status which is an enum that describes
all possible error types.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6351
Call dpkg-shlibdeps with arguments excluding the Debianized packages
lib{uutil1,nvpair1,zfs2,zpool2}linux from the auto-generated
dependencies of generated .debs. A shim dh_shlibdeps that calls the
real dh_shlibdeps with corresponding arguments is installed into a
temporary directory, which is in turn pre-pended to the PATH for the
alien call, working around alien's inability to directly alter the
dependencies of its output debs. Resolves#6106.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#6309Closes#6106
Initialize dummy_lock to fix the build error in gcc 7.1.1 with:
error: ‘dummy_lock’ is used uninitialized in this function
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#622
GCC 7.1 with will warn when we're not checking the snprintf()
return code in cases where the buffer could be truncated. This
patch either checks the snprintf return code (where applicable),
or simply disables the warnings (ztest.c).
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6253
On RHEL 7.4, include/linux/bio.h now includes a macro for
bio_set_op_attrs that conflicts with the ifndef in ZFS
include/linux/blkdev_compat.h. This patch fixes the build.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#6234Closes#6271
Don't use `uname -r` to determine kernel build directory when the user
specified kernel source with --with-linux. Otherwise, the user is forced
to use --with-linux-obj even if they are the same directory, which is
very counterintuitive.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/617/head
Don't use `uname -r` to determine kernel build directory when the user
specified kernel source with --with-linux. Otherwise, the user is forced
to use --with-linux-obj even if they are the same directory, which is
very counterintuitive.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Linux 4.9 added current_time() as the preferred interface to get
the filesystem time. CURRENT_TIME was retired in Linux 4.12.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6114
Linux has read-ahead logic designed to accelerate sequential workloads.
ZFS has its own read-ahead logic called zprefetch that operates on both
ZVOLs and datasets. Having two prefetchers active at the same time can
cause overprefetching, which unnecessarily reduces IOPS performance on
CoW filesystems like ZFS.
Testing shows that entirely disabling the Linux prefetch results in
a significant performance penalty for reads while commensurate benefits
are seen in random writes. It appears that read-ahead benefits are
inversely proportional to random write benefits, and so a single page
of Linux-layer read-ahead appears to offer the middle ground for both
workloads.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #5902
All filesystems were converted to dynamically allocated BDIs. The
destruction of backing_dev_info structures is handled as part of
super block destruction. Refactor the code to abstract away the
details of creating and destroying a BDI.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6089
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>
Porting Notes:
- Utilities which aren't available under Linux have been removed.
- Because of sudo's default secure path behavior PATH must be
explicitly reset at the top of libtest.shlib. This avoids the
need for all users to customize secure path on their system.
- Updated ZoL infrastructure to manage constrained path
- Updated all test cases
- Check permissions for usergroup tests
- When testing in-tree create links under bin/
- Update fault cleanup such that missing files during
cleanup aren't fatal.
- Configure su environment with constrained path
OpenZFS-issue: https://www.illumos.org/issues/7290
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1d32ba6Closes#5903
In glibc 2.5, makedev(), major(), and minor() are defined in
sys/sysmacros.h. They are also defined in types.h for backward
compatability, but using these definitions triggers a compile warning.
This breaks the ZFS build, as it builds with -Werror.
autoconf email threads indicate these macros may be defined in
sys/mkdev.h in some cases.
This commit adds configure checks to detect where makedev() is defined:
sys/sysmacros.h
sys/mkdev.h
It assumes major() and minor() are defined in the same place.
The libspl types.h then includes
sys/sysmacros.h (preferred) or
sys/mkdev.h (2nd choice)
if one of those defines makedev().
This is done before including the system types.h.
An alternative would be to remove uses of major, minor, and makedev,
instead comparing the st_dev returned from stat64. These configure
checks would then be unnecessary.
This change revealed that __NORETURN was being defined unnecessarily in
libspl/include/sys/sysmacros.h. That definition is removed.
The files in which __NORETURN are used all include types.h, and so all
will get the definition provided by feature_tests.h
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5945
This patch implement the hardware accelerator method in GZIP compression
in ZFS. When the ZFS pool is enabled GZIP compression, the compression
API will be automatically transferred to the hardware accelerator to
free up CPU resource and speed up the compression time.
* To enable Intel QAT hardware acceleration in ZOL you need to have QAT
hardware and the driver installed:
* QAT hardware DH8950:
http://ark.intel.com/products/79483/Intel-QuickAssist-Adapter-8950
* QAT driver:
https://01.org/intel-quickassist-technology
* Start QAT driver in your system:
service qat_service start
* Enable QAT in ZFS, e.g.:
./configure --with-qat=<qat-driver-path>/QAT1.6
make
* Set GZIP compression in ZFS dataset:
zfs set compression = gzip <dataset>
* Get QAT hardware statistics by:
cat /proc/spl/kstat/zfs/qat
* To disable QAT in ZFS:
insmod zfs.ko zfs_qat_disable=1
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Weigang Li <weigang.li@intel.com>
Closes#5846
In torvalds/linux@a528d35, there are changes to the getattr family of functions,
struct kstat, and the interface of inode_operations .getattr.
The inode_operations .getattr and simple_getattr() interface changed to:
int (*getattr) (const struct path *, struct dentry *, struct kstat *,
u32 request_mask, unsigned int query_flags)
The request_mask argument indicates which field(s) the caller intends to use.
Fields the caller has not specified via request_mask may be set in the returned
struct anyway, but their values may be approximate.
The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.
Currently both fields are ignored. It is possible that getattr-related
functions within zfs could be optimized based on the request_mask.
struct kstat includes new fields:
u32 result_mask; /* What fields the user got */
u64 attributes; /* See STATX_ATTR_* flags */
struct timespec btime; /* File creation time */
Fields attribute and btime are cleared; the result_mask reflects this. These
appear to be optional based on simple_getattr() and vfs_getattr() within the
kernel, which take the same approach.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#5875
Before kernel 2.6.29 credentials were embedded in task_structs, and zfs had
cases where one thread would need to refer to the credential of another thread,
forcing it to take a hold on the foreign thread's task_struct to ensure it was
not freed.
Since 2.6.29, the credential has been moved out of the task_struct into a
cred_t.
In addition, the mainline kernel originally did not export __put_task_struct()
but the RHEL5 kernel did, according to zfsonlinux/spl@e811949a57. As of
2.6.39 the mainline kernel exports it.
There is no longer zfs code that takes or releases holds on a task_struct, and
so there is no longer any reference to __put_task_struct().
This affects the linux 4.11 kernel because the prototype for
__put_task_struct() is in a new include file (linux/sched/task.h) and so the
config check failed to detect the exported symbol.
Removing the unnecessary stub and corresponding config check. This works on
kernels since the oldest one currently supported, 2.6.32 as shipped with
Centos/RHEL.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#608
In Linux 4.11, torvalds/linux@2a1f062, signal handling related functions
were moved from sched.h into sched/signal.h.
Add configure checks to detect this and include the new file where
needed.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#608
There are changes to vfs_getattr() in torvalds/linux@a528d35. The new
interface is:
int vfs_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int query_flags)
The request_mask argument indicates which field(s) the caller intends to
use. Fields the caller does not specify via request_mask may be set in
the returned struct anyway, but their values may be approximate.
The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.
This patch uses the query_flags which result in vfs_getattr behaving the same
as it did with the 2-argument version which the kernel provided before
Linux 4.11.
Members blksize and blocks are now always the same size regardless of
arch. They match the size of the equivalent members in vnode_t.
The configure checks are modified to ensure that the appropriate
vfs_getattr() interface is used.
A more complete fix, removing the ZFS dependency on vfs_getattr()
entirely, is deferred as it is a much larger project.
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#608
Properly annotate functions and data section so that objtool does not complain
when CONFIG_STACK_VALIDATION and CONFIG_FRAME_POINTER are enabled.
Pass KERNELCPPFLAGS to assembler.
Use kfpu_begin()/kfpu_end() to protect SIMD regions in Linux kernel.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5872Closes#5041
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).
OpenZFS-issue: https://www.illumos.org/issues/7793
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a
Upstream bugs: DLPX-32883a
Closes#5804
Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
applied to OpenZFS.
Commit 933ec99 removes read and write from f_op because the vfs layer will
select iter_write or aio_write automatically. However, for Linux <= 4.0,
loop_set_fd will actually check f_op->write and set read-only if not exists.
This patch add them back and use the generic do_sync_{read,write} for
aio_{read,write} and new_sync_{read,write} for {read,write}_iter.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5776Closes#5855
Automated auto-online test to go along with ZED FMA integration (PR 4673)
auto_online_001.pos works with real devices (sd- and mpath) and with non-real
block devices (loop) by adding a scsi_debug device to the pool
Note: In order for test group to run, ZED must not currently be running.
Kernel 3.16.37 or higher needed for scsi_debug to work properly
If timeout occurs on test using a scsi_debug device (error noticed on Ubuntu
system), a reboot might be needed in order for test to pass. (more
investigation into this)
Also suppressed output from is_real_device/is_loop_device/is_mpath_device -
was making the log file very cluttered with useless error messages
"ie /dev/mapper/sdc is not a block device" from previous patch
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes#5774
Add the appropriate compiler flags to accept c99 code. This will help to
minimize differences with upstream, and aid porting changes. One change was
necessary in zvol.c because the DEFINE_IDA() macro does not work with the new
compiler flags.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#5756
Disable the warnings regarding ISO C90 forbidding mixed
declarations and code. While this functionality was
introduced as part of C99 gcc does allow this in C90
mode as an extension.
https://gcc.gnu.org/onlinedocs/gcc/Mixed-Declarations.html#Mixed-Declarations
Allowing this usage helps minimize the changes required
when porting patches from OpenZFS. The downside here is
that this functionality is specific to gcc.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5686
The .write/.read file operations callbacks can be retired since
support for .read_iter/.write_iter and .aio_read/.aio_write has
been added. The vfs_write()/vfs_read() entry functions will
select the correct interface for the kernel. This is desirable
because all VFS write/read operations now rely on common code.
This change also add the generic write checks to make sure that
ulimits are enforced correctly on write.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5587Closes#5673
SLAB_USERCOPY flag was used to indicate PAX
not to kill copies from kernel to userland.
With recent grsecurity patchset and
CONFIG_GRKERNSEC_HIDESYM that enables
CONFIG_PAX_USERCOPY zfs would panic.
Handle newer API while keeping old one functional.
Tested-by: RageLtMan <rageltman@sempervictus>
Reviewed-by: spendergrsec <spender@grsecurity.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kevin Tanguy <kevin.tanguy@ovh.net>
Closes#595
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
[bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API"
autotools checks to use an int to determine whether the various REQ_OP
values are defined. This should work properly on kernels >= 4.8.
[bio] bio_set_op_attrs() is now an inline function and can't be detected
with #ifdef. Add a configure check to determine whether bio_set_op_attrs()
is defined. Move the local definition of it from vdev_disk.c to
blkdev_compat.h for consistency with other related compability shims.
[bio] The read/write flags and their modifiers, including WRITE_FLUSH,
WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new
bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA
and set the flags appropriately for each supported kernel version.
[vfs] The generic_readlink() function has been made static. If .readlink
in inode_operations is NULL, generic_readlink() is used.
[zol typo] Completely unrelated to 4.10 compat, fix a typo in the check
for REQ_OP_SECURE_ERASE so that the proper macro is defined:
s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5499
This patch adds a command (-c) option to zpool status and zpool iostat. The
-c option allows you to run an arbitrary command on each vdev and display
the first line of output in zpool status/iostat. The environment vars
VDEV_PATH and VDEV_UPATH are set to the vdev's path and "underlying path"
before running the command. For device mapper, multipath, or partitioned
vdevs, VDEV_UPATH is the actual underlying /dev/sd* disk. This can be useful
if the command you're running requires a /dev/sd* device.
The patch also uses /sys/block/<dev>/slaves/ to lookup the underlying device
instead of using libdevmapper. This not only removes the libdevmapper
requirement at build time, but also allows you to resolve device mapper
devices without being root. This means that UDEV_UPATH get set correctly
when running zpool status/iostat as an unprivileged user.
Example:
$ zpool status -c 'echo I am $VDEV_PATH, $VDEV_UPATH'
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
mpatha ONLINE 0 0 0 I am /dev/mapper/mpatha, /dev/sdc
sdb ONLINE 0 0 0 I am /dev/sdb1, /dev/sdb
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#5368
Allow `zfs unshare <protocol> -a` command to share or unshare all datasets
of a given protocol, nfs or smb.
Additionally, enable most of ZFS Test Suite zfs_share/zfs_unshare test cases.
To work around some Illumos-specific functionalities ($SHARE/$UNSHARE) some
function wrappers were added around them.
Finally, fix and issue in smb_is_share_active() that would leave SMB shares
exported when invoking 'zfs unshare -a'
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#3238Closes#5367
Linux kernel commit 723c038475b78 removed this field.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes#5393
Pass `ACL_TYPE_ACCESS` for type parameter of `set_cached_acl()` and
`forget_cached_acl()` to avoid removal of dead code after BUG() in
compile time. Tested on 3.2.0 kernel.
Introduced in 3779913
Reviewed-by: Massimo Maggi <me@massimo-maggi.eu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5378
Linux 3.14 introduces inode->set_acl(). Normally, acl modification will come
from setxattr, which will handle by the acl xattr_handler, and we already
handles that well. However, nfsd will directly calls inode->set_acl or
return error if it doesn't exists.
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Massimo Maggi <me@massimo-maggi.eu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#5371Closes#5375
Originally, these two function are inline, so their usability is tied to
posix_acl_release. However, since Linux 3.14, they became EXPORT_SYMBOL, so we
can always use them. In this patch, we create an independent test for these
two functions so we can use them when possible.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
The isainfo(1) utility was used by the ZFS Test Suite to determine
when running on a 32-bit platform. This non-portable check has been
replaced with an is_32bit helper function which uses getconf(1).
The getconf(1) utility is available for Linux, FreeBSD, and Illumos.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on
supported filesystem. It's basically doing open(2) and unlink(2) atomically.
The filesystem support is added through i_op->tmpfile. We basically copy the
create operation except we get rid of the link and name related stuff and add
the new node to unlinked set.
We also add support for linkat(2) to link tmpfile. However, since all previous
file operation will skip ZIL, we force a txg_wait_synced to make sure we are
sync safe.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Ubuntu added support for checking inode permissions to lookup_bdev() in kernel
commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21).
Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517
This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and
calls the function in the correct way.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Hajo Möller <dasjoe@gmail.com>
Closes#5336
When creating and destroying pools in tight loop it's possible to
exhaust the number of allowed threads on a system. This results
in taskq_create() failling and a NULL dereference.
Resolve the issue by falling back to opening the vdevs all
synchronously.
Reviewed-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/spl#521
Closes#4637
In torvalds/linux@31051c8 the inode_change_ok() function was
renamed setattr_prepare() and updated to take a dentry ratheri
than an inode. Update the code to call the setattr_prepare()
and add a wrapper function which call inode_change_ok() for
older kernels.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/581/head
In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and
generic_{set,get,remove}xattr are removed. xattr operations will directly
go through sb->s_xattr.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are
merged together into iops->rename(), it now wants flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In Linux 4.9, torvalds/linux@81243ea, group_info changed from 2d array via
->blocks to 1d array via ->gid. We change the spl cred functions accordingly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#581
1. Enable multipath autoreplace support for FMA.
This extends FMA autoreplace to work with multipath disks. This
requires libdevmapper to be installed at build time.
2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online
Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must
be supported by the Linux SES driver for this to work. The enclosure LED
scripts work for multipath devices as well. The scripts will clear the LED
when the fault is cleared.
3. Rate limit ZIO delay and checksum events so as not to flood ZED
ZIO delay and checksum events are rate limited to 5/sec in the zfs module.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2449Closes#3017Closes#5159
Without plugging, the default 'noop' scheduler will not merge
the BIOs which are part of a large ZIO.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes#5181
When building from the head of a branch a release number is
automatically generated with `git describe` using the last tag
on that branch as the base. For this to work the last tag on the
branch needs to be predictable given the current META file.
This logic was accidentally broken when an -rcX tag was added to
the branch. Update it to search for a VERSION or VERSION-RELEASE
tag.
Reviewed-by: Chris Siebenmann <cks.git01@cs.toronto.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5105Closes#5140
When building from the head of a branch a release number is
automatically generated with `git describe` using the last tag
on that branch as the base. For this to work the last tag on the
branch needs to be predictable given the current META file.
This logic was accidentally broken when an -rcX tag was added to
the branch. Update it to search for a VERSION or VERSION-RELEASE
tag.
Reviewed-by: Chris Siebenmann <cks.git01@cs.toronto.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#5105
Closes#572
Fix misleading error message:
"The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes#4680Closes#5029
Author: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Don Brady <don.brady@intel.com>
OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dcbf3bd6
Delphix-commit: https://github.com/delphix/delphix-os/commit/978ed49Closes#4929
ZFS Test Suite Performance Regression Tests
This was pulled into OpenZFS via the compressed arc featureand was
separated out in zfsonlinux as a separate pull request from PR-4768.
It originally came in as QA-4903 in Delphix-OS from John Kennedy.
Expected Usage:
$ DISKS="sdb sdc sdd" zfs-tests.sh -r perf-regression.run
Porting Notes:
1. Added assertions in the setup script to make sure required tools
(fio, mpstat, ...) are present.
2. For the config.json generation in perf.shlib used arcstats and
other binaries instead of dtrace to query the values.
3. For the perf data collection:
- use "zpool iostat -lpvyL" instead of the io.d dtrace script
(currently not collecting zfs_read/write latency stats)
- mpstat and iostat take different arguments
- prefetch_io.sh is a placeholder that uses arcstats instead of
dtrace
4. Build machines require fio, mdadm and sysstat pakage (YMMV).
Future Work:
- Need a way to measure zfs_read and zfs_write latencies per pool.
- Need tools to takes two sets of output and display/graph the
differences
- Bring over additional regression tests from Delphix
When using real devices, specify DISKS="sdb sdc sdd" opposed to
/dev/sdb in zfs-tests.sh - otherwise errors with directory names and
disk names registering as "/dev//dev/sdb" for some tests. The same
goes for mpath: DISK="mpatha mpathad mpathb"
Expected Usage:
$ DISKS="sdb sdc sdd" zfs-tests.sh
SLICE_PREFIX is now set as "p" for a loop device (ie loop0p2) or
"" for a real device (ie sdb2), or either for multipath devices
(ie mpatha1 or mpath1p1) instead of only "p" by default. Note that
kpartx partitioning is not currently supported in this patch
(ie "partx") and may need to be disabled on Debian distributions.
Functions added for determining test directory (/dev or /dev/mapper)
as well as slice prefix are determined and exported mostly in the cfg
file of each test group directory.
Currently zpools cannot be created on whole mpath devices that have
been partitioned. In order to fix this tests have either been revised
to use a partition instead, or if there is a size constraint and the
pool needs to be created on the whole disk, partitions are then deleted
if the device is a multipath device. This functionality is added to
default_cleanup() or to individual cleanup scripts if a non-default
cleanup method is used.
The max partitions is currently set at 8 to account for all of the
tests thus far.
Patch changes are generally encompassed in "if is_linux" construct.
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Reviewed-by: John Salinas <John.Salinas@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Closes#4447Closes#4964Closes#5074
API Change: Module parameter set/get methods take const parameter in
Grsecurity kernel v4.7.1
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Jason Zaman <jason@perfinion.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4997Closes#5001
This patch adds compiler and runtime tests (user and kernel) for following
instruction sets: avx512f, avx512cd, avx512er, avx512pf, avx512bw, avx512dq,
avx512vl, avx512ifma, avx512vbmi.
note: Linux support for AVX-512F (Foundation) instruction set started with
linux v3.15
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4952
Fix bugs due to kernel change in torvalds/linux@4bacc9c923 ("overlayfs:
Make f_path always point to the overlay and f_inode to the underlay").
This problem crashes system when use zfs as a layer of overlayfs.
Signed-off-by: Chen Haiquan <oc@yunify.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4914Closes#4935
All users of bio->bi_rw have been replaced with compatibility wrappers.
This allows the kernel specific logic to be abstracted away, and for
each of the supported cases to be documented with the wrapper. The
updated interfaces are as follows:
* void blk_queue_set_write_cache(struct request_queue *, bool, bool)
* boolean_t bio_is_flush(struct bio *)
* boolean_t bio_is_fua(struct bio *)
* boolean_t bio_is_discard(struct bio *)
* boolean_t bio_is_secure_erase(struct bio *)
* VDEV_WRITE_FLUSH_FUA
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#4951
Starting from Linux 4.7, get_acl will set acl cache pointer to temporary
sentinel value before calling i_op->get_acl. Therefore we can't compare
against ACL_NOT_CACHED and return.
Since from Linux 3.14, get_acl already check the cache for us, so we
disable this in zpl_get_acl.
Linux 4.7 also does set_cached_acl for us so we disable it in zpl_get_acl.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4944Closes#4946
The posix_acl_valid() function has been updated to require a
user namespace. Filesystem callers should normally provide the
user_ns from the super block associcated with the ACL; the
zpl_posix_acl_valid() wrapper has been added for this purpose.
See https://github.com/torvalds/linux/commit/0d4d717f for
complete details.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#4922
Remove ZFS_AC_KERNEL_CURRENT_UMASK and ZFS_AC_KERNEL_POSIX_ACL_CACHING
configure checks, all supported kernel provide this functionality.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#4922
Kernel 4.8 paved the way to enabling mounting a file system inside a
non-init user namespace. To facilitate this a s_user_ns member was
added holding the userns in which the filesystem's instance was
mounted. This enables doing the uid/gid translation relative to
this particular username space and not the default init_user_ns.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4928
Recent 4.X kernels prior to 4.6 require #include of spinlock.h in
order to get the definition of __ARCH_SPIN_LOCK_UNLOCKED which is
used by DEFINE_MUTEX().
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#566
Kernel 4.7 added the option to trim the unused exported symbols. In
my testing this showed to be problematic since the PDE_DATA function
was considered unused and as such was trimmed. This in turn caused the
respective test during spl's configure stage to falsely detect that
PDE_DATA is not defined, which in turn caused build failures later.
Handle this situation by adding detection whether CONFIG_TRIM_UNUSED_KSYMS
is enabled and refuse to build against a kernel which has it enabled
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#565
The rw argument has been removed from submit_bio/submit_bio_wait.
Callers are now expected to set bio->bi_rw instead of passing it
in. See https://github.com/torvalds/linux/commit/4e49ea4a for
complete details.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4892
Issue #4899
For non-rwsem-spinlocks the "count" member was changed from a
"long" to "atomic_long_t" type. A configure check has been
added to detect this change along with new versions of the
_rwsem_tryupgrade() function and RWSEM_COUNT() macro. See
https://github.com/torvalds/linux/commit/8ee62b18 for complete
details.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#563
Prior to b39c22b, which was first generally available in the 0.6.5
release as b39c22b, ZoL never actually submitted synchronous read or write
requests to the Linux block layer. This means the vdev_disk_dio_is_sync()
function had always returned false and, therefore, the completion in
dio_request_t.dr_comp was never actually used.
In b39c22b, synchronous ZIO operations were translated to synchronous
BIO requests in vdev_disk_io_start(). The follow-on commits 5592404 and
aa159af fixed several problems introduced by b39c22b. In particular,
5592404 introduced the new flag parameter "wait" to __vdev_disk_physio()
but under ZoL, since vdev_disk_physio() is never actually used, the wait
flag was always zero so the new code had no effect other than to cause
a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af.
The original rationale for introducing synchronous operations in b39c22b
was to hurry certains requests through the BIO layer which would have
otherwise been subject to its unplug timer which would increase the
latency. This behavior of the unplug timer, however, went away during the
transition of the plug/unplug system between kernels 2.6.32 and 2.6.39.
To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the
BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior.
For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and
ise used for the same purpose.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4858
Since the concept of a kuid and the need to translate from it to
ordinary integer type was added in kernel version 3.5 implement necessary
plumbing to be able to detect this condition during compile time. If
the kernel doesn't support the kuid then just fall back to directly
accessing the respective struct inode's members
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4685
Issue #227
A port of the Illumos Crypto Framework to a Linux kernel module (found
in module/icp). This is needed to do the actual encryption work. We cannot
use the Linux kernel's built in crypto api because it is only exported to
GPL-licensed modules. Having the ICP also means the crypto code can run on
any of the other kernels under OpenZFS. I ended up porting over most of the
internals of the framework, which means that porting over other API calls (if
we need them) should be fairly easy. Specifically, I have ported over the API
functions related to encryption, digests, macs, and crypto templates. The ICP
is able to use assembly-accelerated encryption on amd64 machines and AES-NI
instructions on Intel chips that support it. There are place-holder
directories for similar assembly optimizations for other architectures
(although they have not been written).
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4329
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12
6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f
Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
Counterpart to fd4c7b7, the same approach was taken to resolve
the compatibility issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#4717
Issue #4665
Current rw_tryupgrade does rw_exit and then rw_tryenter(RW_RWITER), and then
does rw_enter(RW_READER) if it fails. This violate the assumption that
rw_tryupgrade should be atomic and could cause extra contention or even lock
inversion.
This patch we implement a proper rw_tryupgrade. For rwsem-spinlock, we take
the spinlock to check rwsem->count and rwsem->wait_list. For normal rwsem, we
use cmpxchg on rwsem->count to change the value from single reader to single
writer.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes zfsonlinux/zfs#4692
Closes#554
Register iterate_shared if it exists so the kernel will used shared
lock and allowing concurrent readdir.
Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE
to allow concurrent seeking.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4664Closes#4665
The GPL test for posix_acl_release() didn't include <linux/module.h>.
Also run this test only when posix_acl_release() exists.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4665
Linux 4.7 changes i_mutex to i_rwsem, and we should used inode_lock and
inode_lock_shared to do exclusive and shared lock respectively.
We use spl_inode_lock{,_shared}() to hide the difference. Note that on older
kernel you'll always take an exclusive lock.
We also add all other inode_lock friends. And nested users now should
explicitly call spl_inode_lock_nested with correct subclass.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#4665
Closes#549
While OpenSolaris libc and glibc both include XDR support, the musl libc
does not in favor of depending on the BSD-licensed libtirpc library.
Adding support is a simple matter of detecting the library, including
the headers and linking against it. By default libtirpc will be checked
for and if available used. Otherwise, configure will fall back to using
the xdr implementation provided by libc if available. The options
--with-tirpc/--without-tirpc can be used to disable this checking.
In addition, the xdr_control() function has been simplied to only
handle ZFSs specific use case.
Original-patch-by: stf <s@ctrlc.hu>
Original-patch-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Closes#2254Closes#4559
To reduce mutex footprint, we detect the existence of owner in kernel mutex,
and rely on it if it exists.
Note that before Linux 3.0, mutex owner is of type thread_info. Also note
that, in Linux 3.18, the condition for owner is changed from
CONFIG_DEBUG_MUTEXES || CONFIG_SMP to
CONFIG_DEBUG_MUTEXES || CONFIG_MUTEX_SPIN_ON_OWNER
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#540
Linux 4.5 added member "name" to xattr_handler. xattr_handler which matches to
whole name rather than prefix should use "name" instead of "prefix".
Otherwise, kernel will return with EINVAL when it tries to resolve handlers.
Also, we remove the strcmp checks when xattr_handler has name, because
xattr_resolve_name will do the check for us.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4549Closes#4537
Accidentally introduced by commit e4023e4. The AM_CONDITIONAL
cannot be located where it can be invoked conditionally, as in
the `--with-config=user` case. Relocate it to the top level
ZFS_AC_CONFIG macro along with the other AM_CONDITIONALs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4416
Accidentally introduced by commit 39fc0cb. The devname2devid utility
which depends on libudev must only be built when libudev headers are
available. This is accomplished through an AM_CONDITIONAL.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4416
This is foundational work for ZED.
Updates a leaf vdev's persistent device strings on Linux platform
* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES
Some examples:
path: '/dev/sdb1'
devid: 'scsi-350000394a8ca4fbc-part1'
phys_path: 'pci-0000:04:00.0-sas-0x50000394a8ca4fbf-lun-0'
path: '/dev/mapper/mpatha'
devid: 'dm-uuid-mpath-35000c5006304de3f'
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2856Closes#3978Closes#4416
This is initial support for x86 vectorized implementations of ZFS parity
and checksum algorithms.
For the compilation phase, configure step checks if toolchain supports relevant
instruction sets. Each implementation must ensure that the code is not passed
to compiler if relevant instruction set is not supported. For this purpose,
following new defines are provided if instruction set is supported:
- HAVE_SSE,
- HAVE_SSE2,
- HAVE_SSE3,
- HAVE_SSSE3,
- HAVE_SSE4_1,
- HAVE_SSE4_2,
- HAVE_AVX,
- HAVE_AVX2.
For detecting if an instruction set can be used in runtime, following functions
are provided in (include/linux/simd_x86.h):
- zfs_sse_available()
- zfs_sse2_available()
- zfs_sse3_available()
- zfs_ssse3_available()
- zfs_sse4_1_available()
- zfs_sse4_2_available()
- zfs_avx_available()
- zfs_avx2_available()
- zfs_bmi1_available()
- zfs_bmi2_available()
These function should be called once, on module load, or initialization.
They are safe to use from user and kernel space.
If an implementation is using more than single instruction set, both compiler
and runtime support for all relevant instruction sets should be checked.
Kernel fpu methods:
- kfpu_begin()
- kfpu_end()
Use __get_cpuid_max and __cpuid_count from <cpuid.h>
Both gcc and clang have support for these. They also handle ebx register
in case it is used for PIC code.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4381
I noticed during code review of zfsonlinux/zfs#4385 that the author of a
commit had peppered the various Makefile.am files with `$(TIRPC_LIBS)`
when putting it into `lib/libspl/Makefile.am` should have sufficed. Upon
further examination, it seems that he had copied what we do with
`$(ZLIB)`. We also have a bit of that with `-ldl` too. Unfortunately,
what we do is wrong, so lets fix it to set a good example for future
contributors.
In addition, we have multiple `-lz` and `-luuid` passed to the compiler
because each `AC_CHECK_LIB` adds it to `$LIBS`. That is somewhat
annoying to see, so we switch to `AC_SEARCH_LIBS` to avoid it. This is
consistent with the recommendation to use `AC_SEARCH_LIBS` over
`AC_CHECK_LIB` by autotools upstream:
https://www.gnu.org/software/autoconf/manual/autoconf-2.66/html_node/Libraries.html
In an ideal world, this would translate into improvements in ELF's
`DT_NEEDED` entries, but that is not the case because of a couple of
bugs in libtool.
The first bug causes libtool to overlink by using static link
dependencies for dynamic linking:
https://wiki.mageia.org/en/Overlinking_issues_in_packaging#libtool_issues
The workaround for this should be to pass `-Wl,--as-needed` in
`LDFLAGS`. That leads us to the second bug, where libtool passes
`LDFLAGS` after the libraries are specified and `ld` will only honor
`--as-needed` on libraries specified before it:
https://sigquit.wordpress.com/2011/02/16/why-asneeded-doesnt-work-as-expected-for-your-libraries-on-your-autotools-project/
There are a few possible workarounds for the second bug. One is to
either patch the compiler spec file to specify `-Wl,--as-needed` or pass
`-Wl,--as-needed` via `CC` like `CC='gcc -Wl,--as-needed'` so that it is
specified early. Another is to patch ltmain.sh like Gentoo does:
https://gitweb.gentoo.org/repo/gentoo.git/tree/eclass/ELT-patches/as-needed
Without one of those workarounds, this cleanup provides no benefit in
terms of `DT_NEEDED` entry generation. It should still be an improvement
because it nicely simplifies the code while encouraging good habits when
patching autotools scripts.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4426
Add the ZFS Test Suite and test-runner framework from illumos.
This is a continuation of the work done by Turbo Fredriksson to
port the ZFS Test Suite to Linux. While this work was originally
conceived as a stand alone project integrating it directly with
the ZoL source tree has several advantages:
* Allows the ZFS Test Suite to be packaged in zfs-test package.
* Facilitates easy integration with the CI testing.
* Users can locally run the ZFS Test Suite to validate ZFS.
This testing should ONLY be done on a dedicated test system
because the ZFS Test Suite in its current form is destructive.
* Allows the ZFS Test Suite to be run directly in the ZoL source
tree enabled developers to iterate quickly during development.
* Developers can easily add/modify tests in the framework as
features are added or functionality is changed. The tests
will then always be in sync with the implementation.
Full documentation for how to run the ZFS Test Suite is available
in the tests/README.md file.
Warning: This test suite is designed to be run on a dedicated test
system. It will make modifications to the system including, but
not limited to, the following.
* Adding new users
* Adding new groups
* Modifying the following /proc files:
* /proc/sys/kernel/core_pattern
* /proc/sys/kernel/core_uses_pid
* Creating directories under /
Notes:
* Not all of the test cases are expected to pass and by default
these test cases are disabled. The failures are primarily due
to assumption made for illumos which are invalid under Linux.
* When updating these test cases it should be done in as generic
a way as possible so the patch can be submitted back upstream.
Most existing library functions have been updated to be Linux
aware, and the following functions and variables have been added.
* Functions:
* is_linux - Used to wrap a Linux specific section.
* block_device_wait - Waits for block devices to be added to /dev/.
* Variables: Linux Illumos
* ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk"
* ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk"
* DEV_DSKDIR "/dev" "/dev/dsk"
* DEV_RDSKDIR "/dev" "/dev/rdsk"
* NEWFS_DEFAULT_FS "ext2" "ufs"
* Many of the disabled test cases fail because 'zfs/zpool destroy'
returns EBUSY. This is largely causes by the asynchronous nature
of device handling on Linux and is expected, the impacted test
cases will need to be updated to handle this.
* There are several test cases which have been disabled because
they can trigger a deadlock. A primary example of this is to
recursively create zpools within zpools. These tests have been
disabled until the root issue can be addressed.
* Illumos specific utilities such as (mkfile) should be added to
the tests/zfs-tests/cmd/ directory. Custom programs required by
the test scripts can also be added here.
* SELinux should be either is permissive mode or disabled when
running the tests. The test cases should be updated to conform
to a standard policy.
* Redundant test functionality has been removed (zfault.sh).
* Existing test scripts (zconfig.sh) should be migrated to use
the framework for consistency and ease of testing.
* The DISKS environment variable currently only supports loopback
devices because of how the ZFS Test Suite expects partitions to
be named (p1, p2, etc). Support must be added to generate the
correct partition name based on the device location and name.
* The ZFS Test Suite is part of the illumos code base at:
https://github.com/illumos/illumos-gate/tree/master/usr/src/test
Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6Closes#1534
Historically libblkid support was detected as part of configure
and optionally enabled. This was done because at the time support
for detecting ZFS pool vdevs had just be added to libblkid and
those updated packages were not yet part of many distributions.
This is no longer the case and any reasonably current distribution
will ship a version of libblkid which can detect ZFS pool vdevs.
This patch makes libblkid mandatory at build time and libblkid
the preferred method of scanning for ZFS pools. For distributions
which include a modern version of libblkid there is no change in
behavior. Explicitly scanning the default search paths is still
supported and can be enabled with the '-s' command line option.
Additionally making libblkid mandatory means that the 'zpool create'
command can reliably detect if a specified device has an existing
non-ZFS filesystem (ext4, xfs) and print a warning.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2448
Both Alpine Linux and Gentoo use OpenRC so we share its logic
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4386
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4251
The registered xattr .list handler was simplified in the 4.5 kernel
to only perform a permission check. Given a dentry for the file it
must return a boolean indicating if the name is visible. This
differs slightly from the previous APIs which also required the
function to copy the name in to the provided list and return its
size. That is now all the responsibility of the caller.
This should be straight forward change to make to ZoL since we've
always required the caller to make the copy. However, this was
slightly complicated by the need to support 3 older APIs. Yes,
between 2.6.32 and 4.5 there are 4 versions of this interface!
Therefore, while the functional change in this patch is small it
includes significant cleanup to make the code understandable and
maintainable. These changes include:
- Improved configure checks for .list, .get, and .set interfaces.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency
with similar iops and fops configure checks.
- POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to
move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}.
Compatibility wrapper were added for old kernels.
- ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing
ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be
a valid pointer, passing NULL for the 'list' and 'name' variables
is allowed and must be checked for. All .list functions were
updated to use the wrapper to aid readability.
- zpl_xattr_filldir() updated to use the .list function for its
permission check which is consistent with the updated Linux 4.5
interface. If a .list function is registered it should return 0
to indicate a name should be skipped, if there is no registered
function the name will be added.
- Additional documentation from xattr(7) describing the correct
behavior for each namespace was added before the relevant handlers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
The follow_link() interface was retired in favor of get_link().
In the process of phasing in get_link() the Linux kernel went
through two different versions. The first of which depended
on put_link() and the final version on a delayed done function.
- Improved configure checks for .follow_link, .get_link, .put_link.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- Both versions .get_link are detected and supported as well
two previous versions of .follow_link.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
3557 dumpvp_size is not updated correctly when a dump zvol's size is changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
3560 dumpadm should be able to remove a dump device
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
https://www.illumos.org/issues/3559https://github.com/illumos/illumos-gate/commit/c61ea56
Porting notes:
- Internal zvol.c changes not applied due to implementation differences.
The external interface and behavior was already consistent with the
latest upstream code.
- Retired 2.6.28 HAVE_CHECK_DISK_SIZE_CHANGE configure check. All
supported kernels (2.6.32 and newer) provide this interface.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4217
This reverts commit 61bbbd9a77 because
older versions of autoconf (2.63) do not support the cross-compile
argument to AC_RUN_IFELSE.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #507
While stack size will vary by architecture it has historically defaulted to
8K on x86_64 systems. However, as of Linux 3.15 the default thread stack
size was increased to 16K. These kernels are now the default in most non-
enterprise distributions which means we no longer need to assume 8K stacks.
This patch takes advantage of that fact by appropriately reverting stack
conservation changes which were made to ensure stability. Changes which
may have had a negative impact on performance for certain workloads. This
also has the side effect of bringing the code slightly more in line with
upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4059
The xattr_hander->{list,get,set} were changed to take a xattr_handler,
and handler_flags argument was removed and should be accessed by
handler->flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
As part of block polling support in Linux 4.4, make_request_fn should
return a cookie value of type blk_qc_t. For now, we make zvol_request
always return BLK_QC_T_NONE until we assess whether and how we want
to support block polling.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
Commit b39c22b set the READ_SYNC and WRITE_SYNC flags for a bio
based on the ZIO_PRIORITY_* flag passed in. This had the unnoticed
side-effect of making the vdev_disk_io_start() synchronous for
certain I/Os.
This in turn resulted in vdev_disk_io_start() being able to
re-dispatch zio's which would result in a RCU stalls when a disk
was removed from the system. Additionally, this could negatively
impact performance and explains the performance regressions reported
in both #3829 and #3780.
This patch resolves the issue by making the blocking behavior
dependent on a 'wait' flag being passed rather than overloading
the passed bio flags.
Finally, the WRITE_SYNC and READ_SYNC behavior is restricted to
non-rotational devices where there is no benefit to queuing to
aggregate the I/O.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3652
Issue #3780
Issue #3785
Issue #3817
Issue #3821
Issue #3829
Issue #3832
Issue #3870
Commit torvalds/linux@4246a0b63b
("block: add a bi_error field to struct bio") dropped the error
argument from bio_endio in favor of newly introduced bio->bi_error.
This also replaces bio->bi_flags value BIO_UPTODATE.
bio_endio was a 3 argument function until Linux 2.6.24, which made it
a 2 argument function, and now the prototype has changed yet again to
a 1 argument function. Support for pre 2.6.24 kernels was already
dropped with 37f9dac592 ("zvol processing should use struct bio")
which assumed the 2 argument version in zvol_request(). Remaining code
to support the 3 argument version is hereby removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Issue #3799
zfsonlinux/zfs@e20cd6f7a8 caused us to
lose IO accounting on zvols. When I originally wrote that last year, the
symbols we needed to maintain IO accounting were GPL exported, but
torvalds/linux@394ffa503b provided
suitable symbols for restoring this functionality 4 months later. We
can call them to restore the IO accounting on Linux 3.19 and later as
well as any older kernels where that patch is backported.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3741
This autotools check was never needed because we can check for the
existence of QUEUE_FLAG_NONROT in the kernel headers.
Also, the comment in config/kernel-blk-queue-nonrot.m4 is incorrect.
This was a Linux 2.6.28 API change, not a Linux 2.6.27 API change.
Signed-off-by: Richard Yao <ryao@gentoo.org>
This autotools check was never needed because we can check for the
existence of QUEUE_FLAG_DISCARD in the kernel headers.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Internally, zvols are files exposed through the block device API. This
is intended to reduce overhead when things require block devices.
However, the ZoL zvol code emulates a traditional block device in that
it has a top half and a bottom half. This is an unnecessary source of
overhead that does not exist on any other OpenZFS platform does this.
This patch removes it. Early users of this patch reported double digit
performance gains in IOPS on zvols in the range of 50% to 80%.
Comments in the code suggest that the current implementation was done to
obtain IO merging from Linux's IO elevator. However, the DMU already
does write merging while arc_read() should implicitly merge read IOs
because only 1 thread is permitted to fetch the buffer into ARC. In
addition, commercial ZFSOnLinux distributions report that regular files
are more performant than zvols under the current implementation, and the
main consumers of zvols are VMs and iSCSI targets, which have their own
elevators to merge IOs.
Some minor refactoring allows us to register zfs_request() as our
->make_request() handler in place of the generic_make_request()
function. This eliminates the layer of code that broke IO requests on
zvols into a top half and a bottom half. This has several benefits:
1. No per zvol spinlocks.
2. No redundant IO elevator processing.
3. Interrupts are disabled only when actually necessary.
4. No redispatching of IOs when all taskq threads are busy.
5. Linux's page out routines will properly block.
6. Many autotools checks become obsolete.
An unfortunate consequence of eliminating the layer that
generic_make_request() is that we no longer calls the instrumentation
hooks for block IO accounting. Those hooks are GPL-exported, so we
cannot call them ourselves and consequently, we lose the ability to do
IO monitoring via iostat. Since zvols are internally files mapped as
block devices, this should be okay. Anyone who is willing to accept the
performance penalty for the block IO layer's accounting could use the
loop device in between the zvol and its consumer. Alternatively, perf
and ftrace likely could be used. Also, tools like latencytop will still
work. Tools such as latencytop sometimes provide a better view of
performance bottlenecks than the traditional block IO accounting tools
do.
Lastly, if direct reclaim occurs during spacemap loading and swap is on
a zvol, this code will deadlock. That deadlock could already occur with
sync=always on zvols. Given that swap on zvols is not yet production
ready, this is not a blocker.
Signed-off-by: Richard Yao <ryao@gentoo.org>
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels. And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients. This patch makes
the following core improvements.
* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.
* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process. This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.
* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.
* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds. This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.
* Snapshots in active use will not be automatically unmounted. As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.
* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated. This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots. This patch modifies the
behavior such that only negative dentries are invalidated. This solves
the issue and may result in a performance improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3589Closes#3344Closes#3295Closes#3257Closes#3243Closes#3030Closes#2841
Starting from linux-2.6.37, {kmap,kunmap}_atomic takes 1 argument instead of 2.
We use zfs_{kmap,kunmap}_atomic as wrappers and always take 2 argument, but
ignore the 2nd for newer kernel.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Pull struct backing_dev_info off the stack: by linux-4.1 it's grown
past our 1024 byte stack frame warning limit resulting in an incorrect
configure result.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#3671
This is some minor fixes to commits 2cac7f5f11
and 2a34db1bdb.
* Make sure to alien'ate the new initramfs rpm package as well!
The rpm package is build correctly, but alien isn't run on it to
create the deb.
* Before copying file from COPY_FILE_LIST, make sure the DESTDIR/dir exists.
* Include /lib/udev/vdev_id file in the initrd.
* Because the initrd needs to use '/sbin/modprobe' instead of 'modprobe',
we need to use this in load_module() as well.
* Make sure that load_module() can be used more globaly, instead of
calling '/sbin/modprobe' all over the place.
* Make sure that check_module_loaded() have a parameter - module to
check.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3626
The default kmem debugging (--enable-debug-kmem) can severely impact
performance on large-scale NUMA systems due to the atomic operations
used in the memory accounting. A 32-thread fio test running on a
40-core 80-thread system and performing 100% cached reads with kmem
debugging is:
Enabled:
READ: io=177071MB, aggrb=2951.2MB/s, minb=2951.2MB/s, maxb=2951.2MB/s,
Disabled:
READ: io=271454MB, aggrb=4524.4MB/s, minb=4524.4MB/s, maxb=4524.4MB/s,
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issues #463
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure \
--with-spl=$HOME/src/git/spl/ \
--with-spl-obj=$HOME/src/git/spl/build
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1082
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#1082
As of Linux 4.2 the kernel has completely retired the nameidata
structure. One of the few remaining consumers of this interface
were the follow_link() and put_link() callbacks.
This patch adds the required checks to configure to detect the
interface change and updates the functions accordingly. Migrating
to the simple_follow_link() interface was considered but was decided
against ironically due to the increased complexity.
It also should be noted that the kernel follow_link() and put_link()
interfaces changes several times after 4.1 and but before 4.2. This
means there is a narrow range of kernel commits which never appear
in an official tag of the Linux kernel which ZoL will not build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3596
As of gcc version 5.1.1 a new boolean comparison warning has been
introduced. This warning is harmless but is triggered several places
in the ZFS code base. Because warnings are promoted to errors when
building with debugging enabled it is necessary to disable the warning
when using versions of gcc which automatically enabling this check.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Supports booting of a ZFS snapshot.
Do this by cloning the snapshot into a dataset. If this, the resulting
dataset, already exists, destroy it. Then mount it on root.
* If snapshot does not exist, use base dataset (the part before '@')
as boot filesystem instead.
* If no snapshot is specified on the 'root=' kernel command line, but there
is an '@', then get a list of snapshots below that filesystem and ask the
user which to use.
* Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually
and explicitly.
* For sub-filesystems, that doesn't have a mountpoint property set, we use
the 'org.zol:mountpoint' to keep track of it's mountpoint.
* Allow rollback of snapshots instead of clone it and boot from the clone.
* Allow mounting a root- and subfs with mountpoint=legacy set
* Allow mounting a filesystem which is using nativ encryption.
* Support all currently used kernel command line arguments
All the different distributions have their own standard on what to specify
on the kernel command line to boot of a ZFS filesystem.
* Extra options:
* zfsdebug=(on,yes,1) Show extra debugging information
* zfsforce=(on,yes,1) Force import the pool
* rollback=(on,yes,1) Rollback (instead of clone) the snapshot
* Only try to import pool if it haven't already been imported
* This will negate the need to force import a pool that have not been exported cleanly.
* Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs.
* Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS
to mount additional filesystems not located under your root dataset.
* Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist.
* Include the udev rule to use by-vdev for pool imports.
* Include the /etc/default/zfs file to the initrd.
* Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set.
* Use /dev/disk/by-vdev before anything.
* Add /dev as a last ditch attempt.
* Fallback to using the cache file if that exist if nothing else worked.
* Use /sbin/modprobe instead of built-in (BusyBox) modprobe.
This gets rid of the message "modprobe: can't load module zcommon".
Thanx to pcoultha for finding this.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2116Closes#2114
For kernels which do not implement a per-suberblock shrinker,
those older than Linux 3.1, the shrink_dcache_parent() function
was used to attempt to reclaim dentries. This was found not be
entirely reliable and could lead to performance issues on older
kernels running meta-data heavy workloads.
To address this issue a zfs_sb_prune_aliases() function has been
added to implement this functionality. It relies on traversing
the list of znodes for a filesystem and adding them to a private
list with a reference held. The private list can then be safely
walked outside the z_znodes_lock to prune dentires and drop the
last reference so the inode can be freed.
This provides the same synchronous behavior as the per-filesystem
shrinker and has the advantage of depending on only long standing
interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3501
Linux 3.15 commit torvalds/linux@293bc98 introduced two new methods.
The ->read_iter() and ->write_iter() methods were designed to replace
the ->aio_read() and ->aio_write() interfaces. Both interfaces were
preserved for several kernel releases in order to migrate all existing
consumers to the new interfaces. But as of Linux 4.1 the legacy
interface has been retired and the ZFS code must be updated to use
the new interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3352
Kernels >= 3.12 have a NUMA-aware superblock shrinker which is used in
ZoL by zfs_sb_prune(). This patch calls the shrinker for each on-line
NUMA node in order that memory be freed for each one.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3495
Stock Linux 2.6.32 and earlier kernels contained a broken version of
rwsem_is_locked() which could return an incorrect value. Because of
this compatibility code was added to detect the broken implementation
and replace it with our own if needed.
The fix for this issue was merged in to the mainline Linux kernel as
of 2.6.33 and the major enterprise distributions based on 2.6.32 have
all backported the fix. Therefore there is no longer a need to carry
this code and it can be removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#454
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes#2974Closes#2107
Commit 60e9f69 added the --with-mounthelperdir option for Gentoo
and in the process accidentally modified the default installation
location. For security reasons mount(8) expects it to only be
installed under /sbin.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3426
Commit f4af6bb783 which added support
for REQ_FAILFAST_MASK but the new autoconf test didn't use the same
preprocessor macro name as the code did.
The effect is that FAILFAST mode has not been enabled for ZoL in any
post-2.6.35 kernel.
Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels.
Raise an error condition if the FAILFAST interface can't be detected.
Signed-off-by: Tim Chase <tim@onlight.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3386
Provide a Redhat specific spl-kmod.spec file which uses the old style
kmods (not kmods2) packaging. By using the provided kmodtool script
packages can be built which support weak modules. This allows for the
kernel to be updated without having to rebuild the SPL kernel modules.
Packages for RHEL/Centos/SL/TOSS which use this spec file can by built
as follows:
$ ./configure --with-spec=redhat
$ make rpms
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Provide a Redhat specific zfs-kmod.spec file which uses the old style
kmods (not kmods2) packaging. By using the provided kmodtool script
packages can be built which support weak modules. This allows for the
kernel to be updated without having to rebuild the ZFS kernel modules.
Packages for RHEL/Centos/SL/TOSS which use this spec file can by built
as follows:
$ ./configure --with-spec=redhat
$ make rpms
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Originally it was thought that custom spec files might be required
for Fedora. Happily that has turns out not to be the case. Since
this directory just contains symlinks to the generic spec files it
can be removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Originally it was thought that custom spec files might be required
for Fedora. Happily that has turns out not to be the case. Since
this directory just contains symlinks to the generic spec files it
can be removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
If kernel lock debugging is enabled, the fs_struct structure exceeds the
typical 1024 byte limit of CONFIG_FRAME_WARN and isn't enabled when it
otherwise should be.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#440
Explicitly disable the unused by variable warnings by setting
__attribute__((unused)) for bdi_setup_and_register(). This is
required because the function is defined with the __must_check
attribute.
Signed-off-by: Bill McGonigle <bill-github.com-public1@bfccomputing.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3141
The 'capabilities' argument which was passed to bdi_setup_and_register()
has been removed. File systems should no longer pass BDI_CAP_MAP_COPY.
For our purposes this means there are now three different interfaces
which must be handled. A zpl_bdi_setup_and_register() wrapper function
has been introduced to provide a single interface to the ZPL code.
* 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
* 4.0 - x.y, bdi_setup_and_register() takes 2 arguments.
I've also taken this opportunity to remove HAVE_BDI because kernels
older then 2.6.32 are no longer supported. All kernels newer than
this will have one of the above interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#3128
To minimize the size of a kmutex_t a MUTEX_OWNER check was added.
It allowed the kmutex_t wrapper to leverage the mutex owner which was
already stored in the mutex for certain kernel configurations.
The upside to this was that it reduced the size of the kmutex_t wrapper
structure by the size of a task_struct pointer (4/8 bytes). The
downside was that two mutex implementations needed to be maintained.
Depending on your exact kernel configuration the correct one would
be selected.
Over the years this solution worked but it could be fragile since it
depending heavily on assumed kernel mutex implementation details. For
example the SPL_AC_MUTEX_OWNER_TASK_STRUCT configure check needed to
be added when the kernel changed how the owner was stored. It also
made the code more complicated than it needed to be.
Therefore, in the name of simplicity and portability this optimization
is being retired. It will slightly increase the memory requirements
for a kmutex_t but only very slightly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #435
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3084
Using AC_LANG_SOURCE with some versions of autoconf is problematic if
the given source is to be written to a header file. Such versions assume
the contents are to be written to conftest.c and generate shell code to
that effect. The contents of the test program to detect support for
Linux tracepoints were consequently malformed (containing the source for
conftest.h) so the build system incorrectly disabled tracepoints
support. Fix this in ZFS_LINUX_TRY_COMPILE_HEADER by passing the header
source directly to ZFS_LINUX_COMPILE_IFELSE.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2953
When the SPL was originally written Linux tracepoints were still
in their infancy. Therefore, an entire debugging subsystem was
added to facilite tracing which served us well for many years.
Now that Linux tracepoints have matured they provide all the
functionality of the previous tracing subsystem. Rather than
maintain parallel functionality it makes sense to fully adopt
tracepoints. Therefore, this patch retires the legacy debugging
infrastructure.
See zfsonlinux/zfs@bc9f413 for the tracepoint changes.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#408
This patch leverages Linux tracepoints from within the ZFS on Linux
code base. It also refactors the debug code to bring it back in sync
with Illumos.
The information exported via tracepoints can be used for a variety of
reasons (e.g. debugging, tuning, general exploration/understanding,
etc). It is advantageous to use Linux tracepoints as the mechanism to
export this kind of information (as opposed to something else) for a
number of reasons:
* A number of external tools can make use of our tracepoints
"automatically" (e.g. perf, systemtap)
* Tracepoints are designed to be extremely cheap when disabled
* It's one of the "accepted" ways to export this kind of
information; many other kernel subsystems use tracepoints too.
Unfortunately, though, there are a few caveats as well:
* Linux tracepoints appear to only be available to GPL licensed
modules due to the way certain kernel functions are exported.
Thus, to actually make use of the tracepoints introduced by this
patch, one might have to patch and re-compile the kernel;
exporting the necessary functions to non-GPL modules.
* Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux
tracepoints are not available for unsigned kernel modules
(tracepoints will get disabled due to the module's 'F' taint).
Thus, one either has to sign the zfs kernel module prior to
loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or
newer.
Assuming the above two requirements are satisfied, lets look at an
example of how this patch can be used and what information it exposes
(all commands run as 'root'):
# list all zfs tracepoints available
$ ls /sys/kernel/debug/tracing/events/zfs
enable filter zfs_arc__delete
zfs_arc__evict zfs_arc__hit zfs_arc__miss
zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone
zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write
zfs_new_state__mfu zfs_new_state__mru
# enable all zfs tracepoints, clear the tracepoint ring buffer
$ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
$ echo 0 > /sys/kernel/debug/tracing/trace
# import zpool called 'tank', inspect tracepoint data (each line was
# truncated, they're too long for a commit message otherwise)
$ zpool import tank
$ cat /sys/kernel/debug/tracing/trace | head -n35
# tracer: nop
#
# entries-in-buffer/entries-written: 1219/1219 #P:8
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr...
z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr...
z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr...
z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr...
z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr...
z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr...
z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru...
lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr...
z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru...
lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ...
To highlight the kind of detailed information that is being exported
using this infrastructure, I've taken the first tracepoint line from the
output above and reformatted it such that it fits in 80 columns:
lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss:
hdr {
dva 0x1:0x40082
birth 15491
cksum0 0x163edbff3a
flags 0x640
datacnt 1
type 1
size 2048
spa 3133524293419867460
state_type 0
access 0
mru_hits 0
mru_ghost_hits 0
mfu_hits 0
mfu_ghost_hits 0
l2_hits 0
refcount 1
} bp {
dva0 0x1:0x40082
dva1 0x1:0x3000e5
dva2 0x1:0x5a006e
cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00
lsize 2048
} zb {
objset 0
object 0
level -1
blkid 0
}
For the specific tracepoint shown here, 'zfs_arc__miss', data is
exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and
zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!).
This kind of precise and detailed information can be extremely valuable
when trying to answer certain kinds of questions.
For anybody unfamiliar but looking to build on this, I found the XFS
source code along with the following three web links to be extremely
helpful:
* http://lwn.net/Articles/379903/
* http://lwn.net/Articles/381064/
* http://lwn.net/Articles/383362/
I should also node the more "boring" aspects of this patch:
* The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to
support a sixth paramter. This parameter is used to populate the
contents of the new conftest.h file. If no sixth parameter is
provided, conftest.h will be empty.
* The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced.
This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro,
except it has support for a fifth option that is then passed as
the sixth parameter to ZFS_LINUX_COMPILE_IFELSE.
These autoconf changes were needed to test the availability of the Linux
tracepoint macros. Due to the odd nature of the Linux tracepoint macro
API, a separate ".h" must be created (the path and filename is used
internally by the kernel's define_trace.h file).
* The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This
is to determine if we can safely enable the Linux tracepoint
functionality. We need to selectively disable the tracepoint code
due to the kernel exporting certain functions as GPL only. Without
this check, the build process will fail at link time.
In addition, the SET_ERROR macro was modified into a tracepoint as well.
To do this, the 'sdt.h' file was moved into the 'include/sys' directory
and now contains a userspace portion and a kernel space portion. The
dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as
well.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This file may be added by automake and therefore should be added
to config/.gitignore. For the full list of possible auxiliary
programs see the full automake documentation.
http://www.gnu.org/software/automake/manual/automake.html#Auxiliary-Programs
Signed-off-by: Marcel Wysocki <maci.stgn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This file may be added by automake and therefore should be added
to config/.gitignore. For the full list of possible auxiliary
programs see the full automake documentation.
http://www.gnu.org/software/automake/manual/automake.html#Auxiliary-Programs
Signed-off-by: Marcel Wysocki <maci.stgn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2848
Installing outside of the prefix is not permissible under Gentoo Prefix.
The package manager will cause the installation process to fail if/when
it sees this. We could handle this by disabling systemd support on
prefix because systemd does not check these paths, but the Gentoo
Council decided that small files such as these should be installed.
That means disabling systemd support on prefix is not an acceptable
workaround. As a consequence, we need some way of control the directory
into which these files are installed.
Making this configurable increases our compliance with the
freedesktop.org specification, which allows these files to be installed
into /etc/modules-load.d:
http://www.freedesktop.org/software/systemd/man/modules-load.d.html
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
Installing outside of the prefix is not permissible under Gentoo Prefix.
The package manager will cause the installation process to fail if/when
it sees this. I could script a workaround inside the ebuild, but it
seemed to make more sense to make this more configurable.
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
Since we changed the default location for the kernel headers to respect
--prefix in the SPL, we must search that location to prevent user builds
from breaking.
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
The vfs_fsync() function has been available since Linux 2.6.29.
There is no longer a need to maintain this compatibility code.
However, the HAVE_2ARGS_VFS_FSYNC check was left in place
since that change occured after 2.6.32.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The kern_path() function has been available since Linux 2.6.28.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The kvasprintf() function has been available since Linux 2.6.22.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
As of Linux 2.6.32 the proc handlers where updated to expect only
five arguments. Therefore there is no longer a need to maintain
this compatibility code and this infrastructure can be simplified.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The groups_search() function was never exported by a mainline kernel
therefore we drop this compatibility code and always provide our own
implementation.
Additionally, the cred_t structure has been available since 2.6.29
so there is no longer a need to maintain compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Just for consistency with the other autoconf checks a small comment
block was added before these checks.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This function has never been exported by any mainline and was only
briefly available under RHEL5. Therefore this check is being removed
and the code update to always use the wrapper function.
The next step will be to eliminate all this code. If ZFS were updated
not to assume that it's pwd was / there would be no need for this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The user_path_dir() function has been available since Linux 2.6.27.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
After the removable of get_vmalloc_info(), the unused global memory
variables, and the optional dcache/icache shrinkers there is no
longer a need for the kallsyms compatibility code. This allows
us to eliminate another brittle area of the code by removing the
kernel upcall this functionality depended on for older kernels.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is optional functionality which may or may not be useful to
ZFS when using older kernels. It is never a hard requirement.
Therefore this functionality is being removed from the SPL and
a simpler slimmed down version will be added to ZFS.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Platforms such as Illumos and FreeBSD have historically provided
global variables which summerize the memory state of a system.
Linux on the otherhand doesn't expose any of this information
to kernel modules and uses entirely different mechanisms for
memory management.
In order to simplify the original ZFS port to Linux these global
variables were emulated by the SPL for the benefit of ZFS. As ZoL
has matured over the years it has moved steadily away from these
interfaces and now no longer depends on them at all.
Therefore, this patch completely removes the global variables
availrmem, minfree, desfree, lotsfree, needfree, swapfs_minfree,
and swapfs_reserve. This greatly simplifies the memory management
code and eliminates a common area of confusion.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The get_vmalloc_info() function was used to back the vmem_size()
function. This was always problematic and resulted in brittle
code because the kernel never provided a clean interface for
modules.
However, it turns out that the only caller of this function in
ZFS uses it to determine the total virtual address space size.
This can be determined easily without get_vmalloc_info() so
vmem_size() has been updated to take this approach which allows
us to shed the get_vmalloc_info() dependency.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The on_each_cpu() function has been available since Linux 2.6.27.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The mutex_lock_nested() function has been available since Linux 2.6.18.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The inode structure has used i_mutex as its internal locking
primitive since 2.6.16. The compatibility code to check for
the previous semaphore primitive has been removed. However,
the wrapper function itself is being kept because it's entirely
possible this primitive will change again to allow finer grained
locking.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The kmalloc_node() function has been available since Linux 2.6.12.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The uaccess header has been available in the same location since
Linux 2.6.18. There is no longer a need to maintain this
compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The uintptr_t typedef has been available since Linux 2.6.24.
There is no longer a need to maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The atomic64_xchg() and atomic64_cmpxchg() functions have been
available since Linux 2.6.24. There is no longer a need to
maintain this compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Many of the time functions had grown overly complex in order to
handle kernel compatibility issues. However, as of Linux 2.6.26
all the required functionality is available. This allows us to
retire numerous configure checks and greatly simplify the time
compatibility wrappers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The fls64() function has been available since Linux 2.6.16 and
it should be used to implemented highbit64(). This allows us
to provide an optimized implementation and simplify the code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Support for the CTL_UNNUMBERED sysctl interface was removed in
Linux 2.6.19. There is no longer any reason to maintain this
compatibility code. There also issue any reason to keep around
the CTL_NAME macro and helpers so they have been retired.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The register_sysctl() interface has been stable since Linux 2.6.21.
There is no longer a need to maintain compatibility code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
There is no longer a need to wrap this because utsname() is provided
by the kernel and can be called directly. This will require a small
change in the ZFS code because utsname is expected to be a global
structure and not a function.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Since the Linux 2.6.29 kernel all mutexes have been adaptive mutexs.
There is no longer any point in keeping this code so it is being
removed to simplify the code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When the SPL was originally written it was designed to use the
device_create() and device_destroy() functions. Unfortunately,
these functions changed considerably over the years making them
difficult to rely on.
As it turns out a better choice would have been to use the
misc_register()/misc_deregister() functions. This interface
for registering character devices has remained stable, is simple,
and provides everything we need.
Therefore the code has been reworked to use this interface. The
higher level ZFS code has always depended on these same interfaces
so this is also as a step towards minimizing our kernel dependencies.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Apply the license specified in the META file to ensure the
compatibility checks are all performed consistently.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Apply the license specified in the META file to ensure the
compatibility checks are all performed consistently.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
The HAVE_IOCTL_* configure checks were originally added for
compatibility with an ancient version of glibc. This support
and additional complexity is no longer needed and is therefore
being removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#585
zfsonlinux/spl#bcb15891ab394e11615eee08bba1fd85ac32e158 implemented
Linux 3.6+ support by adding duplicate vn_rename and vn_remove
functions. The new ones were cleaner, but the duplicate functions made
the codebase less maintainable. This adds some compatibility shims that
allow us to retire the older vn_rename and vn_remove in favor of the new
ones on old kernels. The result is a net 143 line reduction in lines of
code and a cleaner codebase.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#370
Linux kernel 3.17 removes the action function argument from
wait_on_bit(). Add autoconf test and compatibility macro to support
the new interface.
The former "wait_on_bit" interface required an 'action' function to
be provided which does the actual waiting. There were over 20 such
functions in the kernel, many of them identical, though most cases
can be satisfied by one of just two functions: one which uses
io_schedule() and one which just uses schedule(). This API change
was made to consolidate all of those redundant wait functions.
References: torvalds/linux@7431620
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#378
There are two common locations where udev and dracut components are
commonly installed. When building packages using the 'make rpm|deb'
targets check those common locations and pass them to rpmbuild. For
non-standard configurations these values can be provided by the
the following configure options:
--with-udevdir=DIR install udev helpers [default=check]
--with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]]
--with-dracutdir=DIR install dracut helpers [default=check]
When rebuilding using the source packages the per-distribution
default values specified in the spec file will be used. This is
the preferred way to build packages for a distribution but the
ability to override the defaults is provided as a convenience.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2310Closes#1680
Set LANG=C before calling 'rpmbuild' to avoid rpmbuild failing on
the translated date string in the changelog.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: zfsonlinux/spl#306
Set LANG=C before calling 'rpmbuild' to avoid rpmbuild failing on
the translated date string in the changelog.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#306
This adds ability to set the location of the kernel via defines
when building from the spec files. This is useful when building
against a kernel installed in a non-standard location.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1874
From day one the various ZFS libraries should have been placed in their
own sub-packages. Primarily this allows for multiple major versions of
the libraries to be concurrently installed. It also facilitates a
smaller build environment by minimizing the required dependencies.
The specific changes required to split the libraries from the utilities
are as follows:
* libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added
and contain the versioned shared libraries. The Fedora packaging
guidelines discourage providing static libraries so they are not
included in the packages.
http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries
* The zfs-devel package was renamed libzfs2-devel and the new package
obsoletes the old zfs-devel package. This package includes all
the required headers for the libzpool2, libnvpair1, libuutil1, and
libzfs2 libraries and their respective unversioned shared libraries.
This package should eventually be split in to individual lib*-devel
packages but it will still take some work to cleanly separate them.
Therefore the libzfs2-devel package provides the expected lib*-devel
packages so the all proper dependencies can still be created.
http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages
* Moved '/sbin/ldconfig' execution from the zfs packge to each of the
new library packages as described by the packaging guidelines.
http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries
* The /usr/share/doc/ files were moved in to the libzfs2-devel package.
* Updated config/deb.am to be aware of the packaging changes. This
ensures that 'deb-utils' make target converts all the resulting
packages generated by the 'rpm-utils' target.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2329Closes: #2341
Issue: #2145
When creating packages in a git repository the release number
can be automatically set by 'git describe'. This normally works
well but if your repository has newer tags which match the form
NAME-VERSION* the release may be incorrectly calculated. To
prevent this the match patten has been restricted to the contents
of the META file, NAME-VERSION.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When creating packages in a git repository the release number
can be automatically set by 'git describe'. This normally works
well but if your repository has newer tags which match the form
NAME-VERSION* the release may be incorrectly calculated. To
prevent this the match patten has been restricted to NAME-VERSION.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
For small objects the Linux slab allocator has several advantages
over its counterpart in the SPL. These include:
1) It is more memory-efficient and packs objects more tightly.
2) It is continually tuned to maximize performance.
Therefore it makes sense to layer the SPLs slab allocator on top
of the Linux slab allocator. This allows us to leverage the
advantages above while preserving the Illumos semantics we depend
on. However, there are some things we need to be careful of:
1) The Linux slab allocator was never designed to work well with
large objects. Because the SPL slab must still handle this use
case a cut off limit was added to transition from Linux slab
backed objects to kmem or vmem backed slabs.
spl_kmem_cache_slab_limit - Objects less than or equal to this
size in bytes will be backed by the Linux slab. By default
this value is zero which disables the Linux slab functionality.
Reasonable values for this cut off limit are in the range of
4096-16386 bytes.
spl_kmem_cache_kmem_limit - Objects less than or equal to this
size in bytes will be backed by a kmem slab. Objects over this
size will be vmem backed instead. This value defaults to
1/8 a page, or 512 bytes on an x86_64 architecture.
2) Be aware that using the Linux slab may inadvertently introduce
new deadlocks. Care has been taken previously to ensure that
all allocations which occur in the write path use GFP_NOIO.
However, there may be internal allocations performed in the
Linux slab which do not honor these flags. If this is the case
a deadlock may occur.
The path forward is definitely to start relying on the Linux slab.
But for that to happen we need to start building confidence that
there aren't any unexpected surprises lurking for us. And ideally
need to move completely away from using the SPLs slab for large
memory allocations. This patch is a first step.
NOTES:
1) The KMC_NOMAGAZINE flag was leveraged to support the Linux slab
backed caches but it is not supported for kmem/vmem backed caches.
2) Regardless of the spl_kmem_cache_*_limit settings a cache may
be explicitly set to a given type by passed the KMC_KMEM,
KMC_VMEM, or KMC_SLAB flags during cache creation.
3) The constructors, destructors, and reclaim callbacks are all
functional and will be called regardless of the cache type.
4) KMC_SLAB caches will not appear in /proc/spl/kmem/slab due to
the issues involved in presenting correct object accounting.
Instead they will appear in /proc/slabinfo under the same names.
5) Several kmem SPLAT tests needed to be fixed because they relied
incorrectly on internal kmem slab accounting. With the updated
test cases all the SPLAT tests pass as expected.
6) An autoconf test was added to ensure that the __GFP_COMP flag
was correctly added to the default flags used when allocating
a slab. This is required to ensure all pages in higher order
slabs are properly refcounted, see ae16ed9.
7) When using the SLUB allocator there is no need to attempt to
set the __GFP_COMP flag. This has been the default behavior
for the SLUB since Linux 2.6.25.
8) When using the SLUB it may be desirable to set the slub_nomerge
kernel parameter to prevent caches from being merged.
Original-patch-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#356
Detect the updated vfs_rename() interface and call it with an
extra flags argument.
References:
torvalds/linux@520c8b1
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #355
We need inode_owner_or_capable() for ZFS file attributes in addition to
xattrs, so it should go into its own file. This moves it into its own
file and changes it to be more comprehensive. It will now fail if no
known good API is detected.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1691
rq_for_each_segment changed from taking bio_vec * to taking bio_vec.
We provide rq_for_each_segment4 which takes both.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter.
This patch creates BIO_BI_*(bio) macros to hide the differences.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod}
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
zed supports a '-M' cmdline opt to lock all pages in memory via
mlockall(). The _POSIX_MEMLOCK define is checked to determine whether
this function is supported. The current test assumes mlockall()
is supported if _POSIX_MEMLOCK is non-zero. However, this test is
insufficient according to mlock(2) and sysconf(3). If _POSIX_MEMLOCK
is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0,
availability must be checked at runtime.
This commit adds an autoconf check for mlockall() to user.m4. The zed
code block for mlockall() is now guarded with a test for HAVE_MLOCKALL.
If defined, mlockall() will be called and its runtime availability
checked via its return value.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
Add macro definitions to AM_CPPFLAGS to propagate makefile installation
directory variables for libexecdir, runstatedir, sbindir, and
sysconfdir.
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Installation-Directory-Variables.html
A corollary is that you should not use these variables except
in makefiles. For instance, instead of trying to evaluate
datadir in configure and hard-coding it in makefiles using e.g.,
'AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])',
you should add -DDATADIR='$(datadir)' to your makefile's definition
of CPPFLAGS (AM_CPPFLAGS if you are also using Automake).
The runstatedir directory is for "installing data files which the
programs modify while they run, that pertain to one specific machine,
and which need not persist longer than the execution of the program".
https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
It will be defined by autoconf 2.70 or later, and default to
"$(localstatedir)/run".
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=a197431414088a417b407b9b20583b2e8f7363bd
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
torvalds/linux@8077c0d983 added a
__must_check to the bdi_setup_and_register(), which caused our autotools
check to break. zfsonlinux/zfs@729210564a
was intended to correct that, but it depended on -Wno-unused-result,
which is unrecognized in older GCC versions. That commit has been
reverted in favor of a solution that does not require
-Wno-unused-result.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2102Closes#2135
Older GCC versions do not obey -Wno-unused-result. This reverts commit
729210564a in favor of a solution that
does not require -Wno-unused-result.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1906
When testing compiler flags, we only need to do compile test. Otherwise,
configure will fail with "configure: error: cannot run test program while
cross compiling" when cross compiling.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2191
This adds systemd unit files replacing the functionality offered by
the SysV init script found in etc/init.d.
It has been developed and tested on Fedora 19, Fedora 20
and openSuSE 13.1.
Four unit files and one target are offered.
zfs-import-cache.service:
Import pools from /etc/zfs/zpool.cache. This unit will wait for
udev to settle.
zfs-import-scan.service:
Import pools by scanning /dev/disk/by-id for zvols. This unit will
only run if /etc/zfs/zpool.cache is not present. This unit will wait
for udev to settle
zfs-mount.service:
Mount ZFS native filesystems. It contains a dependency to be loaded
before local-fs.target.
zfs-share.service:
Share NFS/SMB filesystems. This unit contains a dependency that
will cause it to be restarted whenever the smb or nfs-server unit
is restarted, restoring the shares added.
zfs.target:
This target pulls in the other units in order to start ZFS. It's
the only unit that can be enabled/disabled, all other services
are static and pulled in by dependencies. It will honour zfs=off
and zfs=no options on the kernel command line.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2108
GCC >+ 4.8's aggressive loop optimization breaks some of the iterators
over the dn_blkptr[] pseudo-array in dnode_phys. Since dn_blkptr[] is
defined as a single-element array, GCC believes an iterator can only
access index 0 and will unroll the loop into a single iteration.
One way to resolve the issue would be to cast the array to a pointer
and fix all the iterators that might break. The only loop where it
is known to cause a problem is this loop in dmu_objset_write_ready():
for (i = 0; i < dnp->dn_nblkptr; i++)
bp->blk_fill += dnp->dn_blkptr[i].blk_fill;
In the common case where dn_nblkptr is 3, the loop is only executed a
single time and "i" is equal to 1 following the loop.
The specific breakage caused by this problem is that the blk_fill of
root block pointers wouldn't be set properly when more than one blkptr
is in use (when no indrect blocks are needed).
The simple reproducing sequence is:
zpool create tank /tank.img
zdb -ddddd tank 0
Notice that "fill=31", however, there are two L0 indirect blocks with
"F=31" and "F=5". The fill count should be 36 rather than 31. This
problem causes an assert to be hit in a simple "zdb tank" when built
with --enable-debug.
However, this approach was not taken because we need to be absolutely
sure we catch all instances of this unwanted optimization. Therefore,
the build system has been updated to detect if GCC supports the
aggressive loop optimization. If it does the optimization will be
explicitly disabled using the -fno-aggressive-loop-optimization option.
Original-fix-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2010Closes#2051
Four new dataset properties have been added to support SELinux. They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8). When one of
these properties is set to something other than 'none'. That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.
For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:
$ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media
This will ensure the filesystem is automatically mounted with that
rootcontext. It is equivalent to manually specifying the rootcontext
with the -o option like this:
$ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media
By default all four contexts are set to 'none'. Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1504
This broke compilation against Linux 3.13 and GCC 4.7.3.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1906
This check was originally added for SLES10, a093c6a, to check for
a 'struct vfsmount *' argument which they added. However, since
SLES10 is based on a 2.6.16 kernel which is no longer supported
this functionality was dropped. The checks were refactored to
support Linux 3.13 without concern for historical versions.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#312
There's a missing semicolon and equals sign in the first hunk of this
commit in config/kernel-bdi.m4. This results in the test always
failing. The effects were noticed when rrdtool, a tool which modifies
files by mmap() and msync(), would have data never get saved to disk
in spite of the files working while the mounted filesystem remains
mounted.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1889
torvalds/linux@24f7c6 introduced a new shrinker API while
torvalds/linux@a0b021 dropped support for the old shrinker API.
This patch adds support for the new shrinker API by wrapping
the old one with the new one.
This change also reorganizes the autotools checks on the shrinker
API such that the configure script will fail early if an unknown
API is encountered in the future.
Support for the set_shrinker() API which was used by Linux 2.6.22
and older has been dropped. As a general rule compatibility is
only maintained back to Linux 2.6.26.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/zfs#1732
Closes zfsonlinux/zfs#1822
Closes#293Closes#307
Needed for Illumos #3582. This interface is supposed to support
a variable-resolution timeout with nanosecond granularity. This
implementation rounds up to microsecond resolution, as nanosecond-
precision timing is rarely needed for real-world performance
tuning and may incur unnecessary busy-waiting. usleep_range() is
used if available, otherwise udelay() or msleep() are used
depending on the length of the delay interval.
Add flags from sys/callo.h as these are used to control the behavior of
cv_timedwait_hires(). Specifically,
CALLOUT_FLAG_ABSOLUTE
Normally, the expiration passed to the timeout API functions is
an expiration interval. If this flag is specified, then it is
interpreted as the expiration time itself.
CALLOUT_FLAG_ROUNDUP
Roundup the expiration time to the next resolution boundary. If this
flag is not specified, the expiration time is rounded down.
References:
https://www.illumos.org/issues/3582illumos/illumos-gate@0689f76
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#304
This change adds support for Posix ACLs by storing them as an xattr
which is common practice for many Linux file systems. Since the
Posix ACL is stored as an xattr it will not overwrite any existing
ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also
be non-functional on other platforms although it may be visible
as an xattr if that platform understands SA based xattrs.
By default Posix ACLs are disabled but they may be enabled with
the new 'aclmode=noacl|posixacl' property. Set the property to
'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added
an appropriate acltype will be added.
This change passes the POSIX Test Suite cleanly with the exception
of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too).
http://www.tuxera.com/community/posix-test-suite/
Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#170
libblkid support is dormant because the autotools check is broken and
liblkid identifies ZFS vdevs as "zfs_member", not "zfs". We fix that
with a few changes:
First, we fix the libblkid autotools check to do a few things:
1. Make a 64MB file, which is the minimum size ZFS permits.
2. Make 4 fake uberblock entries to make libblkid's check succeed.
3. Return 0 upon success to make autotools use the success case.
4. Include stdlib.h to avoid implicit declration of free().
5. Check for "zfs_member", not "zfs"
6. Make --with-blkid disable autotools check (avoids Gentoo sandbox violation)
7. Pass '-lblkid' correctly using LIBS not LDFLAGS.
Second, we change the libblkid support to scan for "zfs_member", not
"zfs".
This makes --with-blkid work on Gentoo.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1751
