They only need a couple of fields, and passing the whole thing just
invites fiddling around inside it, like modifying flags, which then
makes it much harder to understand the zio state from inside zio.c.
We move the flag update to just after a successful throttle in zio.c.
Rename ZIO_FLAG_IO_ALLOCATING to ZIO_FLAG_ALLOC_THROTTLED
Better describes what it means, and makes it look less like
IO_IS_ALLOCATING, which means something different.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17508
We're not supposed to modify someone else's io_flags, so we need another
way to propagate DIO_CHKSUM_ERR.
If we squint, we can see that io_reexecute is really just recording
exceptional events that a parent (or its parents) will need to do
something about. It just happens that the only things we've had
historically are two forms of reexecution: now or later (suspend).
So, rename it to io_post, as in, post-IO info/events/actions. And now we
have a few spare bits for other conditions.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17507
Before running a pass zs_enospc_count is checked to free up some space
by destroying a random dataset. But the space freed may still be not
re-usable during the TXG_DEFER window breaking the next dataset creation
in ztest_generic_run().
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Igor Ostapenko <igor.ostapenko@klarasystems.com>
Closes#17506
Runs `zfs mount -R <dataset>` at boot, after `zfs mount -a`.
Intended to replace `mountpoint=legacy` in certain mount setups.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Meriel Luna Mittelbach <lunarlambda@gmail.com>
Closes#17483
When running ztest under the CI a common failure mode is for the
underlying filesystem to run out of available free space. Since
the storage associated with a GitHub-hosted running is fixed, we
instead create a pool and use a compressed ZFS dataset to store
the ztest vdev files. This significantly increases the available
capacity since the data written by ztest is highly compressible.
A compression ratio of over 40:1 is conservatively achieved using
the default lz4 compression. Autotrimming is enabled to ensure
freed blocks are discarded from the backing cipool vdev file.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17501
special_small_blocks is applied to blocks after compression, so it
makes no sense to demand its values to be power of 2. At most
they could be multiple of 512, but that would still buy us nothing,
so lets allow them be any within SPA_MAXBLOCKSIZE.
Also special_small_blocks does not really need to depend on the
set recordsize, enabled pool features or presence of special vdev.
At worst in any of those cases it will just do nothing, so we
should not complicate users lives by artificial limitations.
While there, polish comments for recordsize and volblocksize.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17497
71216b91d2 introduced a regression
on debian/ubuntu systems during build.
The reason being, that building the RPM for pyzfs was using
a different library path than building the library itself.
This is now harmonized.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Rüegg <martin.rueegg@metaworx.ch>
Closes#16155Closes#17480
Fixes an obvious typo, where a variable was missing the required
leading dollar sign ($)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Rüegg <martin.rueegg@metaworx.ch>
Closes#17480
Special vdevs were originally designed as a small blocks storage
for dRAID, for which role RAIDZ/dRAID topologies are not good.
But it is more often used as SSD storage for metadata and hot
data of HDD pools. In these use cases narrow RAIDZ of SSDs might
be fine, so we should not introduce unnecessary restrictions,
and ZFS internally does not care.
Similar applies to dedup vdevs. Original DDT used 4KB blocks,
for which anything but mirror was a terrible storage. But new
FDT implementation uses 32KB blocks by default, which are much
less demanding even including compression, and which could be
increased even higher now, if needed.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17496
This allows to change the meaning of priority differences in FreeBSD
without requiring code changes in ZFS.
This upstreams commit fd141584cf89d7d2 from FreeBSD src.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17489
When an allocation is happening on a raidz vdev, the number of sectors
allocated is rounded up to a multiple of nparity + 1. If this results in
the allocation spilling into an extra row, then the corresponding call
to vdev_raidz_asize_to_psize will incorrectly assume that parity sectors
were allocated for that spilled row, even though no data is stored
there.
If we determine that happened, we need to subtract out those extra
sectors before performing the rest of the capacity calculation.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17490
Since 246e588, gang blocks written to raidz vdevs will write past the
end of their allocation, corrupting themselves, other data, or both.
The reason is simple - when allocating the gang children, we call
vdev_psize_to_asize() to find out how much data we should load into the
allocation we just did. vdev_raidz_asize_to_psize() had a bug; it
computed the psize, but returned the original asize. The raidz layer
dutifully writes that much out, into space beyond the end of the
allocation.
If there's existing data there, it gets overwritten, causing checksum
errors when that data is read. Even there's not data there (unlikely,
given that gang blocks are in play at all), that area is not considered
allocated, so can be allocated and overwritten later.
The fix is simple: return the psize we just computed.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17488
The field is subsequently accessed in zfs_mknode(), in
zfs_inherit_projid(). The Linux implementation of zfs_create_fs() has
this initialization already; there is no counterpart to
zfs_create_share_dir() that I can see.
Reported-by: KMSAN
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#17486
As discussed in the comments of PR #17004, you can theoretically run
into a case where a gang child has more copies than the gang header,
which can lead to some odd accounting behavior (and even trip a
VERIFY). While the accounting code could be changed to handle this, it
fundamentally doesn't seem to make a lot of sense to allow this to
happen. If the data is supposed to have a certain level of reliability,
that isn't actually achieved unless the gang_copies property is set to
match it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17484
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17443
There are three possible cases where dmu_tx_assign() may
encounter a fatal error. When there is a true lack of free
space (ENOSPC), when there is a lack of quota space (EDQUOT),
or when data required to perform the transaction cannot be
read from disk (EIO). See the dmu_tx_check_ioerr() function
for additional details of on the motivation for check for
I/O error early.
Prior to this change dmu_tx_assign() would return the
contents of tx->tx_err which covered a wide range of possible
error codes (EIO, ECKSUM, ESRCH, etc). In practice, none
of the callers could do anything useful with this level of
detail and simply returned the error.
Therefore, this change converts all tx->tx_err errors to EIO,
adds ASSERTs to dmu_tx_assign() to cover the only possible
errors, and clarifies the function comment to include EIO as
a possible fatal error.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian D Behlendorf <behlendo@slag12.llnl.gov>
Closes#17463
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17473
While FreeBSD itself does not support projects, there is no reason
why it can't be controlled via `zfs project` and other subcommands.
Most of the code is actually already there and just needs some
revival and sync with Linux, plus enabling some tests not depending
on the OS support.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17423
There are still a variety of bugs involving the vdev_nonrot property
that will cause problems if you try to run the test suite with
segment-based weighting disabled, and with other things in the weighting
code. Parents' nonrot property need to be updated when children are
added. When vdevs are expanded and more metaslabs are added, the weights
have to be recalculated (since the number of metaslabs is an input to
the lba bias function). When opening, faulted or unopenable children
should not be considered for whether a vdev is nonrot or not (since the
nonrot property is determined during a successful open, this can cause
false negatives). And draid spares need to have the nonrot property set
correctly.
Sponsored-by: Eshtek, creators of HexOS
Sponsored-by: Klara, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17469
FreeBSD provides CI-IMAGES since some time. These images are
based on nuageinit, which does not support fqdn and sudo for
example. So we need currently some workarounds to get it
working.
The FreeBSD images will be more compatible with cloud-init in
some near future. Then we can remove the workaround things.
These versions are used for testing:
- freebsd13-4r (RELEASE)
- freebsd14-3s (STABLE)
- freebsd15-0c (CURRENT)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17462
Linux 5.16 by default fails the build on objtool warnings. We have
known and understood objtool warnings we can't fix without
involving Linux maintainers.
To work around this we introduce an objtool wrapper script which
removes the `--Werror` flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17456
ZIL introduced dependencies between its write ZIOs to permit flush
defer, when we flush vdev caches only once all the write ZIOs has
completed. But it was recently spotted that it serializes not only
ZIO completions handling, but also their ready stage. It means ZIO
pipeline can't calculate checksums for the following ZIOs until all
the previous are checksumed, even though it is not required. On a
systems where memory throughput of a single CPU core is limited,
it creates single-core CPU bottleneck, which is difficult to see
due to ZIO pipeline design with many taskqueue threads.
While it would be great to bypass the ready stage waits, it would
require changes to ZIO code, and I haven't found a clean way to do
it. But I've noticed that we don't need any dependency between
the write ZIOs if the previous one has some waiters, which means
it won't defer any flushes and work as a barrier for the earlier
ones.
Bypassing it won't help large single-thread writes, since all the
write ZIOs except the last in that case won't have waiters, and
so will be dependent. But in that case the ZIO processing might
not be a bottleneck, since there will be only one thread populating
the write buffers, that will likely be the bottleneck.
But bypassing the ZIO dependency on multi-threaded write workloads
really allows them to scale beyond the checksuming throughput of
one CPU core.
My tests with writing 12 files on a same dataset on a pool with
4 striped NVMes as SLOGs from 12 threads with 1MB blocks on a
system with Xeon Silver 4114 CPU show total throughput increase
from 4.3GB/s to 8.5GB/s, increasing the SLOGs busy from ~30% to
~70%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17458
zfs_putpages() would put the entire range of pages onto the ZIL, then
return VM_PAGER_OK for each page to the kernel. However, an associated
zil_commit() or txg sync had not happened at this point, so the write
may not actually be on disk.
So, we rework it to use a ZIL commit callback, and do the post-write
work of undirtying the page and signaling completion there. We return
VM_PAGER_PEND to the kernel instead so it knows that we will take care
of it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
If a write is split across mutliple itxs, we only want the callback on
the last one, otherwise it will be called for every itx associated with
this single write, which makes it very hard to know what to clean up.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
If the kernel will honour our error returns, use them. If not, fool it
by setting a writeback error on the superblock, if available.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
If the pool is suspended, we'll just block in zil_commit(). If the
system is shutting down, blocking wouldn't help anyone. So, we should
keep this test for now, but at least return an error for anyone who is
actually interested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
The superblock pointer will always be set, as will z_log, so remove code
supporting cases that can't occur (on Linux at least).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
Fairly coarse, but if it returns while the pool suspends, it must be
with an error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
Previous dmu_tx_count_clone() was broken, stating that cloning is
similar to free. While they might be from some points, cloning
is not net-free. It will likely consume space and memory, and
unlike free it will do it no matter whether the destination has
the blocks or not (usually not, so previous code did nothing).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17431
Looking on txg_wait_synced(, 0) I've noticed that it always syncs
5 TXGs: 3 TXG_CONCURRENT_STATES + 2 TXG_DEFER_SIZE. But in case
of dmu_offset_next() we do not care about deferred frees. And even
concurrent TXGs we might not need sync all 3 if the dnode was not
dirtied in last few TXGs.
This patch makes dmu_offset_next() to sync one TXG at a time until
the dnode is clean, but no more than 3 TXG_CONCURRENT_STATES times.
My tests with random simultaneous writes and seeks over many files
on HDD pool show 7-14% performance increase.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17434
dbuf_verify(): Don't need the lock, since we only compare pointers.
dbuf_findbp(): Don't need the lock, since aside of unneeded assert
we only produce the pointer, but don't de-reference it.
dnode_next_offset_level(): When working on top level indirection
should lock dnode buffer's db_rwlock, since it is our parent. If
dnode has no buffer, then it is meta-dnode or one of quotas and we
should lock the dataset's ds_bp_rwlock instead.
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17441
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17426
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17426
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17426
And make its check and sync functions visible, so I can hook them up to
zcp_synctask. Rename not strictly necessary, but it definitely looks
more like a dsl_dataset thing than a dmu_objset thing, to the extent
that those things even have a meaningful distinction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17426
It is not right, but there are few examples when TX is aborted
after being assigned in case of error. To handle it better on
production systems add extra cleanup steps.
While here, replace couple dmu_tx_abort() in simple cases.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17438
Having high-refcount dedup entries for zero blocks is inefficient
when they could be recorded as a holes instead. Normally, zero
compression is not done if compression is disabled to not confuse
naive benchmarks. But with dedup enabled, it is expected that the
write will be skipped anyway, so we are just optimizing the way it
is skipped.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17435
The io_uring interface is available as a Technology Preview.
Details: https://access.redhat.com/solutions/4723221
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17447
The `scn_min_txg` can now be used not only with resilver. Instead
of checking `scn_min_txg` to determine whether it’s a resilver or
a scrub, simply check which function is defined. Thanks to this
change, a scrub_finish event is generated when performing a scrub
from the saved txg.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Closes#17432
* zfs_link: allow tempfile sync to fail if pool suspends
4653e2f7d3 (#17355) allows dmu_tx_assign() to fail if the pool suspends
when failmode=continue, but zfs_link() can fall back to
txg_wait_synced() if it has to wait for a tempfile to be fully created
before continuing, which will block if the pool suspends.
Handle this by requesting an error return if the pool suspends when
failmode=continue, and if that happens, return EIO.
* zfs_clone_range: allow dirty wait to fail if pool suspends
4653e2f7d3 (#17355) allows dmu_tx_assign() to fail if the pool suspends
when failmode=continue, but zfs_clone_range() can fall back to
txg_wait_synced() if it has to wait for a dirty block to be written out,
which will block if the pool suspends.
Handle this by requesting an error return if the pool suspends when
failmode=continue, and if that happens, return EIO.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17413
After #17401 the Linux build produces some stack related warnings.
Silence them with the `STACK_FRAME_NON_STANDARD` macro.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17410
It makes no sense to limit read size below the block size, since
DMU will any way consume resources for the whole block, while the
current zfs_vnops_read_chunk_size is only 1MB, which is smaller
that maximum block size of 16MB. Plus in case of misaligned
Uncached I/O the buffer may get evicted between the chunks,
requiring repeating I/Os.
On 64-bit platforms increase zfs_vnops_read_chunk_size to 32MB.
It allows to less depend on speculative prefetcher if application
requests specific size, first not waiting for prefetcher to start
and later not prefetching more than needed.
Also while there, we don't need to align reads to the chunk size,
but only to a block size, which is smaller and so more forgiving.
My profiles show ~4% of CPU time saving when reading 16MB blocks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17415
With increasing number of metaslab classes it can be helpful for
debugging to know what we are looking at.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17409
Before this change in case of any allocation error ZFS always fallen
back to normal class. But with more of different classes available
we migth want more sophisticated logic. For example, it makes sense
to fall back from dedup first to special class (if it is allowed to
put DDT there) and only then to normal, since in a pool with dedup
and special classes populated normal class likely has performance
characteristics unsuitable for dedup.
This change implements general mechanism where fallback order is
controlled by the same spa_preferred_class() as the initial class
selection. And as first application it implements the mentioned
dedup->special->normal fallbacks. I have more plans for it later.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17391
The module parameter name was not changed in FreeBSD sysctls
list: 'vfs.zfs.vol.mode'. Also, on Linux side the name is:
/sys/module/zfs/parameters/zvol_volmode.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17386
The module parameter now is represented in FreeBSD sysctls list
with name: 'vfs.zfs.vol.prefetch_bytes'. The default value is 131072,
same as on Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17385
The child locking difference is simple enough to handle with a boolean.
The actual work is more involved, and it's easy to forget to change
things in both places when experimenting. Just collapse them.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17382
Fedora 40 has gone EOL as of May 2025, retire the CI builder.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17408
