Off by one, confused me a while!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16500
__string field definition includes the source variable for a value
of the string when the TP hits; in 6.10+ kernels, __assign_str()
uses that to copy a value from src to the string, with older
kernels, __assign_str still accepted src as a second parameter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Tony Hutter <hutter2@llnl.gov>
Closes#16475Closes#16515
Adding O_DIRECT support to ZFS to bypass the ARC for writes/reads.
O_DIRECT support in ZFS will always ensure there is coherency between
buffered and O_DIRECT IO requests. This ensures that all IO requests,
whether buffered or direct, will see the same file contents at all
times. Just as in other FS's , O_DIRECT does not imply O_SYNC. While
data is written directly to VDEV disks, metadata will not be synced
until the associated TXG is synced.
For both O_DIRECT read and write request the offset and request sizes,
at a minimum, must be PAGE_SIZE aligned. In the event they are not,
then EINVAL is returned unless the direct property is set to always (see
below).
For O_DIRECT writes:
The request also must be block aligned (recordsize) or the write
request will take the normal (buffered) write path. In the event that
request is block aligned and a cached copy of the buffer in the ARC,
then it will be discarded from the ARC forcing all further reads to
retrieve the data from disk.
For O_DIRECT reads:
The only alignment restrictions are PAGE_SIZE alignment. In the event
that the requested data is in buffered (in the ARC) it will just be
copied from the ARC into the user buffer.
For both O_DIRECT writes and reads the O_DIRECT flag will be ignored in
the event that file contents are mmap'ed. In this case, all requests
that are at least PAGE_SIZE aligned will just fall back to the buffered
paths. If the request however is not PAGE_SIZE aligned, EINVAL will
be returned as always regardless if the file's contents are mmap'ed.
Since O_DIRECT writes go through the normal ZIO pipeline, the
following operations are supported just as with normal buffered writes:
Checksum
Compression
Encryption
Erasure Coding
There is one caveat for the data integrity of O_DIRECT writes that is
distinct for each of the OS's supported by ZFS.
FreeBSD - FreeBSD is able to place user pages under write protection so
any data in the user buffers and written directly down to the
VDEV disks is guaranteed to not change. There is no concern
with data integrity and O_DIRECT writes.
Linux - Linux is not able to place anonymous user pages under write
protection. Because of this, if the user decides to manipulate
the page contents while the write operation is occurring, data
integrity can not be guaranteed. However, there is a module
parameter `zfs_vdev_direct_write_verify` that controls the
if a O_DIRECT writes that can occur to a top-level VDEV before
a checksum verify is run before the contents of the I/O buffer
are committed to disk. In the event of a checksum verification
failure the write will return EIO. The number of O_DIRECT write
checksum verification errors can be observed by doing
`zpool status -d`, which will list all verification errors that
have occurred on a top-level VDEV. Along with `zpool status`, a
ZED event will be issues as `dio_verify` when a checksum
verification error occurs.
ZVOLs and dedup is not currently supported with Direct I/O.
A new dataset property `direct` has been added with the following 3
allowable values:
disabled - Accepts O_DIRECT flag, but silently ignores it and treats
the request as a buffered IO request.
standard - Follows the alignment restrictions outlined above for
write/read IO requests when the O_DIRECT flag is used.
always - Treats every write/read IO request as though it passed
O_DIRECT and will do O_DIRECT if the alignment restrictions
are met otherwise will redirect through the ARC. This
property will not allow a request to fail.
There is also a module parameter zfs_dio_enabled that can be used to
force all reads and writes through the ARC. By setting this module
parameter to 0, it mimics as if the direct dataset property is set to
disabled.
Reviewed-by: Brian Behlendorf <behlendorf@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Co-authored-by: Matt Macy <mmacy@FreeBSD.org>
Co-authored-by: Brian Behlendorf <behlendorf@llnl.gov>
Closes#10018
All callers to spa_prop_get() and spa_prop_get_nvlist() supplied their
own preallocated nvlist (except ztest), so we can remove the option to
have them allocate one if none is supplied.
This sidesteps a bug in spa_prop_get(), where the error var wasn't
initialised, which could lead to the provided nvlist being freed at the
end.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16505
This adds zfs_valstr, a collection of pretty printers for bitfields and
enums. These are useful in debugging, logging and other display contexts
where raw values are difficult for the untrained (or even trained!) eye
to decipher.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Requires the new 'flat' physical data which has the start
time for a class entry.
The amount to prune can be based on a target percentage of
the unique entries or based on the age (i.e., every entry
older than N days).
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16277
This commit extends the zpool-reguid(8) command with a -g flag, which
allows the user to specify the GUID to set.
This change also adds some general tests for zpool-reguid(8).
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This commit changes the frontend zio_compress_data and
zio_decompress_data APIs to take ABD points instead of buffer pointers.
All callers are updated to match. Any that already have an appropriate
ABD nearby now use it directly, while at the rest we create an one.
Internally, the ABDs are passed through to the provider directly.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This commit changes the provider compress and decompress API to take ABD
pointers instead of buffer pointers for both data source and
destination. It then updates all providers to match.
This doesn't actually change the providers to do chunked compression,
just changes the API to allow such an update in the future. Helper
macros are added to easily adapt the ABD functions to their buffer-based
implementations.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This is mostly to make searching easier.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
This allows a simple "wrapping" ABD for an existing linear buffer to be
allocated on the stack, avoiding an allocation.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Removing the platform #ifdefs from shared headers in favour of
per-platform headers. Makes abd_t much leaner, among other things.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
The Linux abd_os.c serves double-duty as the userspace scatter abd
implementation, by carrying an emulation of kernel scatterlists. This
commit lifts common and userspace-specific parts out into a separate
abd_os.c for libzpool.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
Nothing ever checks it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16253
This exposes a variety of per-taskq stats under /proc/spl/kstat/taskq,
one file per taskq, named for the taskq name.instance.
These include a small amount of info about the taskq config, the current
state of the threads and queues, and various counters for thread and
queue activity since the taskq was created.
To assist with decrementing queue size counters, the list an entry is on
is encoded in spare bits in the entry flags.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Closes#16171
Adds per-DDT stats counting lookups and where they were serviced from
(either log or backing zap), number of log entries in memory, and flow
rates.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
The dedup log does not have a stable cursor, so its not possible to
persist our current scan location within it across pool reloads.
Beccause of this, when walking (scanning), we can't treat it like just
another source of dedup entries.
Instead, when a scan is wanted, we switch to an aggressive flushing
mode, pushing out entries older than the scan start txg as fast as we
can, before starting the scan proper.
Entries after the scan start txg will be handled via other methods; the
DDT ZAPs and logs will be written as normal, and blocks not seen yet
will be offered to the scan machinery as normal.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Adds a log/journal to dedup. At the end of txg, instead of writing the
entry directly to the ZAP, instead its adding to an in-memory tree and
appended to an on-disk object. The on-disk object is only read at
import, to reload the in-memory tree.
Lookups first go the the log tree before going to the ZAP, so
recently-used entries will remain close by in memory. This vastly
reduces overhead from dedup IO, as it will not have to do so many
read/update/write cycles on ZAP leaf nodes.
A flushing facility is added at end of txg, to push logged entries out
to the ZAP. There's actually two separate "logs" (in-memory tree and
on-disk object), one active (recieving updated entries) and one flushing
(writing out to disk). These are swapped (ie flushing begins) based on
memory used by the in-memory log trees and time since we last flushed
something.
The flushing facility monitors the amount of entries coming in and being
flushed out, and calibrates itself to try to flush enough each txg to
keep up with the ingest rate without competing too much with other IO.
Multiple tuneables are provided to control the flushing facility.
All the histograms and stats are update to accomodate the log as a
separate entry store. zdb gains knowledge of how to count them and dump
them. Documentation included!
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Both the API and the code were kinda mangled and I was really struggling
to follow it. The worst offender was the old ddt_stat_add(); after
fixing it up the rest of the changes are mostly knock-on effects and
targets of opportunity.
Note that the old ddt_stat_add() was safe against overflows - it could
produce crazy numbers, but the compiler wouldn't do anything stupid. The
assertions in ddt_stat_sub() go a lot of the way to protecting against
this; getting in a position where overflows are a problem is definitely
a programming error.
Also expanding ddt_stat_add() and ddt_histogram_empty() produces less
efficient assembly. I'm not bothered about this right now though; these
should not be hot functions, and if they are we'll optimise them later.
If we have to go back to the old form, we'll comment it like crazy.
Finally, I've removed the assertion that the bucket will never be
negative, as it will soon be possible to have entries with zero
refcounts: an entry for a block that is no longer on the pool, but is on
the log waiting to be synced out. It might be better to have a separate
bucket for these, since they're still using real space on disk, but
ultimately these stats are driving UI, and for now I've chosen to keep
them matching how they've looked in the past, as well as match the
operators mental model - pool usage is managed elsewhere.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Traditional dedup keeps a separate ddt_phys_t "type" for each possible
count of DVAs (that is, copies=) parameter. Each of these are tracked
independently of each other, and have their own set of DVAs. This leads
to an (admittedly rare) situation where you can create as many as six
copies of the data, by changing the copies= parameter between copying.
This is both a waste of storage on disk, but also a waste of space in
the stored DDT entries, since there never needs to be more than three
DVAs to handle all possible values of copies=.
This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the
first ddt_phys_t is used. Each time a block is written with the dedup
bit set, this single phys is checked to see if it has enough DVAs to
fulfill the request. If it does, the block is filled with the saved DVAs
as normal. If not, an adjusted write is issued to create as many extra
copies as are needed to fulfill the request, which are then saved into
the entry too.
Because a single phys is no longer an all-or-nothing, but can be
transitioning from fewer to more DVAs, the write path now has to keep a
copy of the previous "known good" DVA set so we can revert to it in case
an error occurs. zio_ddt_write() has been restructured and heavily
commented to make it much easier to see what's happening.
Backwards compatibility is maintained simply by allocating four
ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys
selection macros to check the flag. In the old arrangement, each number
of copies gets a whole phys, so it will always have either zero or all
necessary DVAs filled, with no in-between, so the old behaviour
naturally falls out of the new code.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
This slims down the in-memory entry to as small as it can be. The
IO-related parts are made into a separate entry, since they're
relatively rarely needed.
The variable allocation for dde_phys is to support the upcoming flat
format.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The idea here is that sometimes you need the contents of an entry with
no intent to modify it, and/or from a place where its difficult to get
hold of its originating ddt_t to know how to interpret it.
A lightweight entry contains everything you might need to "read" an
entry - its key, type and phys contents - but none of the extras for
modifying it or using it in a larger context. It also has the full
complement of phys slots, so it can represent any kind of dedup entry
without having to know the specific configuration of the table it came
from.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The "flat phys" feature will use only a single phys slot for all
entries, which means the old "single", "double" etc naming now makes no
sense, and more importantly, means that choosing the right slot for a
given block pointer will depend on how many slots are in use for a given
DDT.
This removes the old names, and adds accessor macros to decouple
specific phys array indexes from any particular meaning.
(These macros look strange in isolation, mainly in the way they take the
ddt_t* as an arg but don't use it. This is mostly a separate commit to
introduce the concept to the reader before the "flat phys" commit
extends it).
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15893
The upcoming dedup features break the long held assumption that all
blocks on disk with a 'D' dedup bit will always be present in the DDT,
or will have the same set of DVA allocations on disk as in the DDT.
If the DDT is no longer a complete picture of all the dedup blocks that
will be and should be on disk, then it does us no good to walk and prime
it up front, since it won't necessarily match up with every block we'll
see anyway.
Instead, we rework things here to be more like the BRT checks. When we
see a dedup'd block, we look it up in the DDT, consume a refcount, and
for the second-or-later instances, count them as duplicates.
The DDT and BRT are moved ahead of the space accounting. This will
become important for the "flat" feature, which may need to count a
modified version of the block.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15892
This is the supporting infrastructure for the upcoming dedup features.
Traditionally, dedup objects live directly in the MOS root. While their
details vary (checksum, type and class), they are all the same "kind" of
thing - a store of dedup entries.
The new features are more varied than that, and are better thought of as
a set of related stores for the overall state of a dedup table.
This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will
cause new DDTs to be created as a ZAP in the MOS root, named
DDT-<checksum>. The is used as the root object for the normal type/class
store objects, but will also be a place for any storage required by new
features.
This commit adds two new fields to ddt_t, for version and flags. These
are intended to describe the structure and features of the overall dedup
table, and are stored as-is in the DDT root. In this commit, flags are
always zero, but the intent is that they can be used to hang optional
logic or state onto for new dedup features. Version is always 1.
For a "legacy" dedup table, where no DDT root directory exists, the
version will be 0.
ddt_configure() is expected to determine the version and flags features
currently in operation based on whether or not the fast_dedup feature is
enabled, and from what's available on disk. In this way, its possible to
support both old and new tables.
This also provides a migration path. A legacy setup can be upgraded to
FDT by creating the DDT root ZAP, moving the existing objects into it,
and setting version and flags appropriately. There's no support for that
here, but it would be straightforward to add later and allows the
possibility that newer features could be applied to existing dedup
tables.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15892
Since the change to folios it has just been a wrapper anyway. Linux has
removed their wrapper, so we add one.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
It's no longer available directly on the request queue, but its easy to
get from the attached disk.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
In 6.11 struct queue_limits gains a 'features' field, where, among other
things, flush and write-cache are enabled. Detect it and use it.
Along the way, the blk_queue_set_write_cache() compat wrapper gets a
little cleanup. Since both flags are alway set together, its now a
single bool. Also the very very ancient version that sets q->flush_flags
directly couldn't actually turn it off, so I've fixed that. Not that we
use it, but still.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#16400
It's now the caller's responsibility do special handling for holes if
that's something it wants.
This also makes zio_compress_data() and zio_decompress_data() properly
the inverse of each other.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Jason Lee <jasonlee@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16326
So far, the values of ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN were equal to
MAXPATHLEN, which is 1024 on FreeBSD and 4096 on Linux. This wasn't
ideal. Some of the surprising outcomes of this implementation are:
1. When creating a pool user property with zpool-set(8), libzfs makes
sure that the length of the property's value is less than
ZFS_MAXPROPLEN. However, the ZFS kernel module does not do that.
Instead, it checks the length against ZAP_MAXVALUELEN. As a result,
it is possible to create a property the length of which is going to
be larger than zpool(8) is ready to read.
2. A pool user property created on Linux is too big to be read on
FreeBSD.
This change sets both ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN to
ZAP_MAXVALUELEN, which is 8192 at the moment.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16248
Spare and l2cache vdev labels are not updated during import. Therefore,
if disk paths are updated between pool export and import, the AUX label
still shows the old paths. This patch syncs the AUX label
during import to show the correct path information.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#15817
This fixes things so mirrored special vdevs report themselves as
"class=special" rather than "class=normal".
This happens due to the way the vdev nvlists are constructed:
mirrored special devices - The 'mirror' vdev has allocation bias as
"special" and it's leaf vdevs are "normal"
single or RAID0 special devices - Leaf vdevs have allocation bias as
"special".
This commit adds in code to check if a leaf's parent is a "special"
vdev to see if it should also report "special".
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16217
This commit adds support for zpool status command to displpay status
of ZFS pools in JSON format using '-j' option. Status information is
collected in nvlist which is later dumped on stdout in JSON format.
Existing options for zpool status work with '-j' flag. man page for
zpool status is updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16217
This commit adds support for zpool get command to output the list of
properties for ZFS Pools and VDEVS in JSON format using '-j' option.
Man page for zpool get is updated to include '-j' option.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16217
This commit adds support for JSON output for zfs version and zfs get
commands. '-j' flag can be used to get output in JSON format.
Information is collected in nvlist objects which is later printed in
JSON format. Existing options that work for zfs get and zfs version
also work with '-j' flag.
man pages for zfs get and zfs version are updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16217
Currently, if a minor is in use when we try to remove it, we'll skip it
and never come back to it again. Since the zvol state is hung off the
minor in the kernel, this can get us into weird situations if something
tries to use it after the removal fails. It's even worse at pool export,
as there's now a vestigial zvol state with no pool under it. It's
weirder again if the pool is subsequently reimported, as the zvol code
(reasonably) assumes the zvol state has been properly setup, when it's
actually left over from the previous import of the pool.
This commit attempts to tackle that by setting a flag on the zvol if its
minor can't be removed, and then checking that flag when a request is
made and rejecting it, thus stopping new work coming in.
The flag also causes a condvar to be signaled when the last client
finishes. For the case where a single minor is being removed (eg
changing volmode), it will wait for this signal before proceeding.
Meanwhile, when removing all minors, a background task is created for
each minor that couldn't be removed on the spot, and those tasks then
wake and clean up.
Since any new tasks are queued on to the pool's spa_zvol_taskq,
spa_export_common() will continue to wait at export until all minors are
removed.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#14872Closes#16364
ZVOL_DUMPIFIED is a vestigial Solaris leftover, and not used anywhere.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16364
