For consistency with disk vdevs honor the zfs_nocacheflush tunable.
This setting is available primarily for debugging and performance
analysis.
Signed-off-by: HC <mmttdebbcc@yahoo.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2336
In the case where a variable-sized SA overlaps the spill block pointer and
a new variable-sized SA is being added, the header size was improperly
calculated to include the to-be-moved SA. This problem could be
reproduced when xattr=sa enabled as follows:
ln -s $(perl -e 'print "x" x 120') blah
setfattr -n security.selinux -v blahblah -h blah
The symlink is large enough to interfere with the spill block pointer and
has a typical SA registration as follows (shown in modified "zdb -dddd"
<SA attr layout obj> format):
[ ... ZPL_DACL_COUNT ZPL_DACL_ACES ZPL_SYMLINK ]
Adding the SA xattr will attempt to extend the registration to:
[ ... ZPL_DACL_COUNT ZPL_DACL_ACES ZPL_SYMLINK ZPL_DXATTR ]
but since the ZPL_SYMLINK SA interferes with the spill block pointer, it
must also be moved to the spill block which will have a registration of:
[ ZPL_SYMLINK ZPL_DXATTR ]
This commit updates extra_hdrsize when this condition occurs, allowing
hdrsize to be subsequently decreased appropriately.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #2214
Issue #2228
Issue #2316
Issue #2343
Restructure the zfsdev_state_list to allow for lock-free reading by
converting to a simple singly-linked list from which items are never
deleted and over which only forward iterations are performed. It depends
on, among other things, the atomicity of accessing the zs_minor integer
and zs_next pointer.
This fixes a lock inversion in which the zfsdev_state_lock is used by
both the sync task (txg_sync) and indirectly by any user program which
uses /dev/zfs; the zfsdev_release method uses the same lock and then
blocks on the sync task.
The most typical failure scenerio occurs when the sync task is cleaning
up a user hold while various concurrent "zfs" commands are in progress.
Neither Illumos nor Solaris are affected by this issue because they use
DDI interface which provides lock-free reading of device state via the
ddi_get_soft_state() function.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2301
Verbatim imports can cause hostid mismatches, but things otherwise work. `zpool
status` does not handle this and will fail when assertions are enabled:
```
zpool: ../../cmd/zpool/zpool_main.c:4418: status_callback: Assertion `reason == ZPOOL_STATUS_OK' failed.
Program received signal SIGABRT, Aborted.
```
Lets instead add a case to display an informative message such as this:
```
pool: rpool
state: ONLINE
status: Mismatch between pool hostid and system hostid on imported pool.
This pool was previously imported into a system with a different hostid,
and then was verbatim imported into this system.
action: Export this pool on all systems on which it is imported.
Then import it to correct the mismatch.
see: http://zfsonlinux.org/msg/ZFS-8000-EY
scan: scrub repaired 0 in 0h8m with 0 errors on Thu Apr 17 19:43:57 2014
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
sda ONLINE 0 0 0
errors: No known data errors
```
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2342
Originally, vdev_file used system_taskq. This would cause a deadlock,
especially on system with few CPUs. The reason is that the prefetcher
threads, which are on system_taskq, will sometimes be blocked waiting
for I/O to finish. If the prefetcher threads consume all the tasks in
system_taskq, the I/O cannot be served and thus results in a deadlock.
We fix this by creating a dedicated vdev_file_taskq for vdev_file I/O.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2270
The dva_get_dsize_sync() function incorrectly assumes that the call
to vdev_lookup_top() cannot fail. However, the NULL dereference at
clearly shows that under certain circumstances it is possible. Note
that offset 0x570 (1376) maps as expected to vd->vdev_deflate_ratio.
BUG: unable to handle kernel NULL pointer dereference at 00000570
crash> struct -o vdev
struct vdev {
[0] uint64_t vdev_id;
... ...
[1376] uint64_t vdev_deflate_ratio;
Given that this can happen this patch add the required error handling.
In the case where vdev_lookup_top() fails assume that no deflation
will occur for the DVA and use the asize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Alexey Zhuravlev <alexey.zhuravlev@intel.com>
Closes#1707Closes#1987Closes#1891
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When fetching property values of snapshots, a check against the head
dataset type must be performed. Previously, this additional check was
performed only when fetching "version", "normalize", "utf8only" or "case".
This caused the ZPL properties "acltype", "exec", "devices", "nbmand",
"setuid" and "xattr" to be erroneously displayed with meaningless values
for snapshots of volumes. It also did not allow for the display of
"volsize" of a snapshot of a volume.
This patch adds the headcheck flag paramater to zfs_prop_valid_for_type()
and zprop_valid_for_type() to indicate the check is being done
against a head dataset's type in order that properties valid only for
snapshots are handled correctly. This allows the the head check in
get_numeric_property() to be performed when fetching a property for
a snapshot.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2265
A minor style issue was accidentally introduced by aa7d06a.
This change resolves that style problem.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Today the metaslab_debug logic performs two tasks:
- load all metaslabs on import/open
- don't unload metaslabs at the end of spa_sync
This change provides knobs for each of these independently.
References:
https://illumos.org/issues/4101https://github.com/illumos/illumos-gate/commit/0713e23
Notes:
1) This is a small piece of the metaslab improvement patch from
Illumos. It was worth bringing over before the rest, since it's
low risk and it can be useful on fragmented pools (e.g. Lustre
MDTs). metaslab_debug_unload would give the performance benefit
of the old metaslab_debug option without causing unwanted delay
during pool import.
Ported-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2227
When the system attributes (SAs) for an object exceed what can
can be stored in the bonus area of a dnode a spill block is
allocated. These spill blocks are currently considered data
blocks. However, they should be accounted for as meta data
because they are effectively an extension of the dnode.
While this may seem like a minor accounting issue it has broader
implications. The key thing to be aware of is that each spill
block will hold a reference on its parent dnode. The dnode in
turn holds a reference on its dbuf in the dnode object. This
means that a single 512 byte data buffer for a spill block can
pin over 16k of meta data. This is analogous to the small file
situation described in 2b13331 where a relatively small number
of data buffer can cause the ARC to exceed the meta limit.
However, unlike the small file case a spill block can legitimately
be considered meta data. By changing the spill block to meta data
they will now be dropped from the cache when the meta limit is
reached. This then allows the dnodes and dbufs which the spill
block was pinning to be released.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Closes#2294
ztest is intended to subject the ZFS code in userland to stress that it
should be able to withstand. Any failures that occur when running it are
failures that likely would occur inside the kernel. However, being in
userland, it is much easier to debug them. In practice, this prevents
a large number of problems from reaching production code.
A design decision was made by the original authors of ztest to make a
distinction between userland locking primitives and kernel locking
primitives. The ztest code itself calls userland locking primitives
while the kernel code being run in userland will call emulated kernel
locking primitives that wrap the userland locking primitives.
When ztest was first ported to Linux, a decision was made to use the
emulated kernel interfaces everywhere. In effect, the userland
rw_rdlock()/rw_wrlock() became the kernel rw_enter() and and the userland
rw_unlock() became the kernel rw_exit(). This caused a regression
because of an assertion in rw_enter() to catch recursive locking. That
is permitted in userland, but not in the kernel. Consequently, the ztest
code itself does recursive read locking. The use of the emulated kernel
interfaces consequently caused the following failure:
ztest: ../../lib/libzpool/kernel.c:384: Assertion `rwlp->rw_owner !=
zk_thread_current() (0x1c87150 != 0x1c87150)' failed.
That occurs because ztest_dmu_objset_create_destroy() will take a read
lock and call ztest_dmu_object_alloc_free(). That will call ztest_io(),
which will take a readlock only when asked to do ZTEST_IO_REWRITE. This
triggered the assertion.
The pthreads rwlock interface was based on the LWP rwlock interface
implemented in Illumos libc. Luckily enough, the subset used by ztest is
almost identical, so we can solve this problem by switching to the LWP
thread rwlock interface in ztest. This eliminates a point of divergence
with Illumos and should make code sharing slightly easier.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1970
This implements a subset of the LWP rwlock interface by wrapping the
equivalent POSIX thread interface. It is a superset of the features
needed by ztest.
The missing bits are {,_}rw_read_held() and {,_}rw_write_held().
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1970
zfsonlinux/zfs@1db7b9be75 should have
fixed this, but this particular string was overlooked.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2288
As described in the comment above dmu_tx_assign() this function must
only fail if the pool is out of space. If for some other reason the
TX cannot be assigned (such as memory pressure) ERESTART must be
returned. Alternately, EAGAIN could be returned to inject a delay
but that isn't required because the caller will block on the condition
variable waiting for the next TXG.
/*
* Assign tx to a transaction group. txg_how can be one of:
*
* (1) TXG_WAIT. If the current open txg is full, waits until there's
* a new one. This should be used when you're not holding locks.
* It will only fail if we're truly out of space (or over quota).
* ...
*/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#2287
We add support for lsattr and chattr to resolve a regression caused
by 88c283952f that broke Python's
xattr.list(). That changet broke Gentoo Portage's FEATURES=xattr,
which depended on Python's xattr.list().
Only attributes common to both Solaris and Linux are supported. These
are 'a', 'd' and 'i' in Linux's lsattr and chattr commands. File
attributes exclusive to Solaris are present in the ZFS code, but cannot
be accessed or modified through this method. That was the case prior to
this patch. The resolution of issue zfsonlinux/zfs#229 should implement
some method to permit access and modification of Solaris-specific
attributes.
References:
https://bugs.gentoo.org/show_bug.cgi?id=483516
Original-patch-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1691
We need inode_owner_or_capable() for ZFS file attributes in addition to
xattrs, so it should go into its own file. This moves it into its own
file and changes it to be more comprehensive. It will now fail if no
known good API is detected.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1691
zfs_is_mountable() fills in the mountpoint buffer, so, as in
upstream, it needs to have been called before the mountpoint
buffer can be used in error messages.
In particular,
return (zfs_error_fmt(hdl, EZFS_MOUNTFAILED,
dgettext(TEXT_DOMAIN, "cannot mount '%s'"),
mountpoint));
should not come before the call to zfs_is_mountable().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Closes#2284
Some network related block device uses tcp_sendpage, which doesn't
behave well when using 0-count page. Add assertion to catch them.
This has a runtime dependency on:
zfsonlinux/spl@ae16ed9 Fix crash when using ZFS on Ceph rbd
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2277
Using the ARM reference simulation (fast model foundation v8) I
cross compiled spl and zfs, to confirm it works on ARMv8 (64 bit
arm architecture, called aarch64 in Linux).
As it is based on previous ARM porting, the resulting patch is
disappointingly small, there was very little to do. The code fixes
the compile issues and has light testing done.
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2260
Endianness detection in LZ4 is broken in user-space builds. This
bug corrupts compressed data and manifests itself in several ztest
failures. When LZ4 was originally ported to Illumos ZFS, the proper
checks for Linux were stripped out. The Linux port then inherited
the remaining detection code that works on Illumos but not on Linux.
The current LZ4 endianness check misuses the condition
defined(__BIG_ENDIAN) to indicate a big-endian system. On Linux
__BIG_ENDIAN is defined uncondtionally in the user-space header
/usr/include/endian.h, regardless of the endianness of the system.
The kernel does not use this header, so only user-space builds are
affected.
While we could fix this by restoring the upstream LZ4 endianness
detection code, reliable checks already exist in
libspl/include/sys/isa_defs.h. This change uses the libspl results
to replace the word-size and endianness checks in LZ4, simplifying
the code and reducing duplication.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes#1963Fixes#1964Fixes#1965
Due to an asymmetry in the kmem accounting a memory leak was being
reported when it was only an accounting issue. All memory allocated
with kmem_alloc() must be released with kmem_free() or it will not
be properly accounted for.
In this case the code used strfree() to release the memory allocated
by kmem_alloc(). Presumably this was done because the size of the
memory region wasn't available when the memory needed to be freed.
To resolve this issue the code has been updated to use strdup() instead
of kmem_alloc() to allocate the memory. Like strfree(), strdup() is
not integrated with the memory accounting. This means we can use
strfree() to release it like Illumos.
SPL: kmem leaked 10/4368729 bytes
address size data func:line
ffff880067e9aa40 10 ZZZZZZZZZZ zfsdev_ioctl:5655
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#2262
1) $SPLSRC and $SRCDIR should be changed to $SRC_DIR. These are
vestiges of an earlier version of the script and were missed when
it was updated. Additionally ensure the directory is created.
2) The 'fail' function should take an integer argument for the
error code to return. Otherwise 0 (success) will be mistakenly
returned and errors will we incorrectly suppressed. The error
code should be meaningful enough to determine where the script
failed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Neither atime nor relatime should be considered to be "temporary mount
point properties". Their semantics are enforced completely within ZFS
and also they're (correctly) not documented as being temporary mount
point properties.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2257
Also, make sure we use clock_t for ddi_get_lbolt to prevent type conversion
from screwing things.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2142
Unfortunately, the zimport.sh test script really does depend on
bash. Moving to /bin/sh should be possible once the shared
infrastructure scripts it depends on is made portable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
rq_for_each_segment changed from taking bio_vec * to taking bio_vec.
We provide rq_for_each_segment4 which takes both.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
After the dmu_req_copy change, bi_io_vecs are not touched, so this is no
longer needed.
This reverts commit e26ade5101.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Originally, dmu_req_copy modifies bv_len and bv_offset in bio_vec so that it
can continue in subsequent passes. However, after the immutable biovec changes
in Linux 3.14, this is not allowed. So instead, we just tell dmu_req_copy how
many bytes are already copied and it will skip to the right spot accordingly.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter.
This patch creates BIO_BI_*(bio) macros to hide the differences.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod}
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
Ensure an error message is logged when the 'zfs.sh' script fails
to either load a module or if udev fails to create the /dev/zfs
device. Error messages for missing KERNEL_MODULES are suppressed
because that functionality may just be built-in to the kernel.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When processing directory components starting from the root dir,
zed_file_create_dirs() contained a bug in checking the return value of
mkdir(). A typo was made, and the test for (mkdir_errno != EEXIST) was
erroneously written as (mkdir_errno == EEXIST). If some of the leading
directory components already existed, this bug would cause the routine
to exit before creating the remaining directory components.
Instead of fixing the above mkdir_errno test, this commit replaces
zed_file_create_dirs() with mkdirp(). This cleanup was already
planned, and zed_file_create_dirs() only existed because I didn't
realize mkdirp() was already in tree at the time.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2248
If mkdirp() is called with a NULL ptr for the path arg, it will return
-1 with errno unchanged. This is unexpected since on error it should
return -1 and set errno to one of the error values listed for mkdir(2).
This commit sets errno = ENOENT for this NULL ptr case. This is in
accordance with the errors specified by mkdir(2):
ENOENT
A component of the path prefix does not exist or is a null pathname.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2248
Several of the in-tree regression tests depend on the availability
of loop devices. If for some reason no loop devices are available
the tests will fail.
Normally this isn't an issue because most Linux distributions create
8 loop devices by default. This is enough for our purposes. However,
recent Fedora releases have only been creating a single loop device
and this leads to failures. Alternately, if something else of the
system is using the loop devices we may see failures.
The fix for this is to update the support scripts to dynamically
create loop devices as needed. The scripts need only create a node
under /dev/ and the loop driver with create the minor. This behavior
has been supported by the loop driver for ages.
Additionally this patch updates cleanup_loop_devices() to cleanup
loop devices which have already had their file store deleted. This
helps prevent stale loop devices from accumulating on the system due
to test failures.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Closes#2249
The format strings in efi_get_info() are intended to extract both the
main device and partition number. However, this is only done correctly
for hd, sd and vd devices. The format strings for ram, dm-, md and loop
devices misparse the input. This causes the partition device to be
incorrectly labelled as the main device with the partition being
labelled 0.
Reported-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2175
This is a continuation of fb5c53ea65:
When /etc/mtab is updated on Linux it's done atomically with
rename(2). A new mtab is written, the existing mtab is unlinked,
and the new mtab is renamed to /etc/mtab. This means that we
must close the old file and open the new file to get the updated
contents. Using rewind(3) will just move the file pointer back
to the start of the file, freopen(3) will close and open the file.
In this commit, a few more rewind(3) calls were replaced with freopen(3)
to allow updated mtab entries to be picked up immediately.
Signed-off-by: John M. Layman <jml@frijid.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2215
Issue #1611
zfsonlinux/zfs#180 occurred because of a race between inode eviction and
zfs_zget(). zfsonlinux/zfs@36df284 tried to address it by making a call
to the VFS to learn whether an inode is being evicted. If it was being
evicted the operation was retried after dropping and reacquiring the
relevant resources. Unfortunately, this introduced another deadlock.
INFO: task kworker/u24:6:891 blocked for more than 120 seconds.
Tainted: P O 3.13.6 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u24:6 D ffff88107fcd2e80 0 891 2 0x00000000
Workqueue: writeback bdi_writeback_workfn (flush-zfs-5)
ffff8810370ff950 0000000000000002 ffff88103853d940 0000000000012e80
ffff8810370fffd8 0000000000012e80 ffff88103853d940 ffff880f5c8be098
ffff88107ffb6950 ffff8810370ff980 ffff88103a9a5b78 0000000000000000
Call Trace:
[<ffffffff813dd1d4>] schedule+0x24/0x70
[<ffffffff8115fc09>] __wait_on_freeing_inode+0x99/0xc0
[<ffffffff8115fdd8>] find_inode_fast+0x78/0xb0
[<ffffffff811608c5>] ilookup+0x65/0xd0
[<ffffffffa035c5ab>] zfs_zget+0xdb/0x260 [zfs]
[<ffffffffa03589d6>] zfs_get_data+0x46/0x340 [zfs]
[<ffffffffa035fee1>] zil_add_block+0xa31/0xc00 [zfs]
[<ffffffffa0360642>] zil_commit+0x12/0x20 [zfs]
[<ffffffffa036a6e4>] zpl_putpage+0x174/0x840 [zfs]
[<ffffffff811071ec>] do_writepages+0x1c/0x40
[<ffffffff8116df2b>] __writeback_single_inode+0x3b/0x2b0
[<ffffffff8116ecf7>] writeback_sb_inodes+0x247/0x420
[<ffffffff8116f5f3>] wb_writeback+0xe3/0x320
[<ffffffff81170b8e>] bdi_writeback_workfn+0xfe/0x490
[<ffffffff8106072c>] process_one_work+0x16c/0x490
[<ffffffff810613f3>] worker_thread+0x113/0x390
[<ffffffff81066edf>] kthread+0xdf/0x100
This patch implements the original fix in a slightly different manner in
order to avoid both deadlocks. Instead of relying on a call to ilookup()
which can block in __wait_on_freeing_inode() the return value from igrab()
is used. This gives us the information that ilookup() provided without
the risk of a deadlock.
Alternately, this race could be closed by registering an sops->drop_inode()
callback. The callback would need to detect the active SA hold thereby
informing the VFS that this inode should not be evicted.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #180
zed monitors ZFS events. When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent. The zevent nvpairs
are passed to the scripts as environment variables. Refer to the zed(8)
manpage for details.
Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution. Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents. Plans are to address this in future commits.
An EID (Event IDentifier) has been added to each event to uniquely
identify it throughout the lifetime of the loaded ZFS kernel module;
it is a monotonically increasing integer that resets to 1 each time
the module is loaded.
Initial scripts have been developed to log zevents to syslog,
automatically rebuild to a hot spare device, and send email in
response to checksum / data / io / resilver.finish / scrub.finish
zevents. To enable email notifications, configure ZED_EMAIL in zed.rc
(which is serving as a config file of sorts until a proper
configuration file is implemented). To enable hot sparing, uncomment
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in zed.rc;
note that the autoexpand property is not yet supported.
zed is a work-in-progress.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
zed supports a '-M' cmdline opt to lock all pages in memory via
mlockall(). The _POSIX_MEMLOCK define is checked to determine whether
this function is supported. The current test assumes mlockall()
is supported if _POSIX_MEMLOCK is non-zero. However, this test is
insufficient according to mlock(2) and sysconf(3). If _POSIX_MEMLOCK
is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0,
availability must be checked at runtime.
This commit adds an autoconf check for mlockall() to user.m4. The zed
code block for mlockall() is now guarded with a test for HAVE_MLOCKALL.
If defined, mlockall() will be called and its runtime availability
checked via its return value.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
When a vdev starts getting I/O or checksum errors it is now
possible to automatically rebuild to a hot spare device.
To cleanly support this functionality in a shell script some
additional information was added to all zevent ereports which
include a vdev. This covers both io and checksum zevents but
may be used but other scripts.
In the Illumos FMA solution the same information is required
but it is retrieved through the libzfs library interface.
Specifically the following members were added:
vdev_spare_paths - List of vdev paths for all hot spares.
vdev_spare_guids - List of vdev guids for all hot spares.
vdev_read_errors - Read errors for the problematic vdev
vdev_write_errors - Write errors for the problematic vdev
vdev_cksum_errors - Checksum errors for the problematic vdev.
By default the required hot spare scripts are installed but this
functionality is disabled. To enable hot sparing uncomment the
ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the
/etc/zfs/zed.d/zed.rc configuration file.
These scripts do no add support for the autoexpand property. At
a minimum this requires adding a new udev rule to detect when
a new device is added to the system. It also requires that the
autoexpand policy be ported from Illumos, see:
https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c
Support for detecting the correct name of a vdev when it's not
a whole disk was added by Turbo Fredriksson.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #2
This functionality has always been missing. But until now there
were no zevents which included an array of strings so it wasn't
missed. However, that's now changed so to ensure this information
is output correctly by 'zpool events -v' the DATA_TYPE_STRING_ARRAY
has been implemented.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
Several of the zfs utilities allow you to pass a vdev's guid rather
than the device name. However, the utilities are not consistent in
how they parse that guid. For example, 'zinject' expects the guid
to be passed as a hex value while 'zpool replace' wants it as a
decimal. The user is forced to just know what format to use.
This patch improve things by making the parsing more tolerant.
When strtol(3) is called using 0 for the base, rather than say
10 or 16, it will then accept hex, decimal, or octal input based
on the prefix. From the man page.
If base is zero or 16, the string may then include a "0x"
prefix, and the number will be read in base 16; otherwise,
a zero base is taken as 10 (decimal) unless the next character
is '0', in which case it is taken as 8 (octal).
NOTE: There may be additional conversions not caught be this patch.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
This commit adds a systemd unit file for zed.service and integrates
it into the zfs.target from commit 881f45c.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2108
Issue #2
