Some C libraries, such as uClibc, do not provide strerror_l() in
which case we fallback to strerror().
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16636Closes#16640
Increase the pool import time allowed by assuming a minimum reduction
to 1/2 instead of 1/3 when comparing sequential to parallel import
times. This is sufficient to verify parallel imports are working as
intended and should address the occasional false positive failure
when the time is slightly exceeded.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16638
As described in the comment above this check the space used by
logged entries is not accounted for and some margin needs to be
added in. While uncommon we have slightly exceeded the 600,000
threshold on some CI run so we increase the limit a bit more.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16637
The ubuntu-latest alias now refers to ubuntu-24.04 instead of
ubuntu-22.04 which causes CodeQL's autobuild to fail with:
cpp/autobuilder: deptrace not supported in ubuntu 24.04
Until deptrace is supported by ubuntu-24.04 hosted runners request
ubuntu-22.04 which is supported.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Closes#16639
When compiling zdb.c on 32-bit platforms, a format conversion error
is reported for a printf() in dump_zap(). Change %l to macro
%" PRIu64 " to match the platform size of a 64-bit unsigned integer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#16635
Mostly so that with the JSON formatting options are also used, they all
look the same. To my eye, `-j --json-flat-vdevs` suggests that they are
different or unrelated, while `--json --json-flat-vdevs` invites no
further questions.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16632
This fixes an oversight in the Direct I/O PR. There is nothing that
stops a process from manipulating the contents of a buffer for a
Direct I/O read while the I/O is in flight. This can lead checksum
verify failures. However, the disk contents are still correct, and this
would lead to false reporting of checksum validation failures.
To remedy this, all Direct I/O reads that have a checksum verification
failure are treated as suspicious. In the event a checksum validation
failure occurs for a Direct I/O read, then the I/O request will be
reissued though the ARC. This allows for actual validation to happen and
removes any possibility of the buffer being manipulated after the I/O
has been issued.
Just as with Direct I/O write checksum validation failures, Direct I/O
read checksum validation failures are reported though zpool status -d in
the DIO column. Also the zevent has been updated to have both:
1. dio_verify_wr -> Checksum verification failure for writes
2. dio_verify_rd -> Checksum verification failure for reads.
This allows for determining what I/O operation was the culprit for the
checksum verification failure. All DIO errors are reported only on the
top-level VDEV.
Even though FreeBSD can write protect pages (stable pages) it still has
the same issue as Linux with Direct I/O reads.
This commit updates the following:
1. Propogates checksum failures for reads all the way up to the
top-level VDEV.
2. Reports errors through zpool status -d as DIO.
3. Has two zevents for checksum verify errors with Direct I/O. One for
read and one for write.
4. Updates FreeBSD ABD code to also check for ABD_FLAG_FROM_PAGES and
handle ABD buffer contents validation the same as Linux.
5. Updated manipulate_user_buffer.c to also manipulate a buffer while a
Direct I/O read is taking place.
6. Adds a new ZTS test case dio_read_verify that stress tests the new
code.
7. Updated man pages.
8. Added an IMPLY statement to zio_checksum_verify() to make sure that
Direct I/O reads are not issued as speculative.
9. Removed self healing through mirror, raidz, and dRAID VDEVs for
Direct I/O reads.
This issue was first observed when installing a Windows 11 VM on a ZFS
dataset with the dataset property direct set to always. The zpool
devices would report checksum failures, but running a subsequent zpool
scrub would not repair any data and report no errors.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16598
The function abd_alloc_from_pages() is used only in kernel.
Excluding sys/vm.h, and vm/vm_page.h includes avoids dependency
problems.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#16616
The scrub code may return EBUSY under several possible scenarios
causing ztest to incorrectly ASSERT when verifying the result of
a raidz expansion. Update the test case to allow EBUSY since it
does not indicate pool damage.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16627
Add ability to generate disk names that contain both a slot number
and a lun number in order to support multi-actuator SAS hard drives
with multiple luns. Also add the ability to zero pad slot numbers to
a desired digit length for easier sorting.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Heller <matthew.f.heller@accre.vanderbilt.edu>
Closes#16603
Update resilver_restart_001.ksh to restore the default
resilver_defer_percent when the test completes.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16618
.NOTPARALLEL target is being forced on userspace as well. This commit
removes .NOTPARALEL target and only serializes the execution of
native-deb* targets.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16622
The -j option added a round of getopt, which didn't know the magic
version flags. So just bypass the whole thing and go straight to the
human output function for the special case.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16615Closes#16617
The inline functions zfs_dio_offset_aligned(), zfs_dio_size_aligned()
and zfs_dio_aligned() are declared as boolean_t but return the bool
type.
This fixes the build of FreeBSD.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#16613
The ABI of libzfs and libzpool have breaking changes since last
SONAME bump in commit fe6babc:
* libzfs: `zpool_print_unsup_feat` removed (used by zpool cmd).
* libzpool: multiple `ddt_*` symbols removed (used by zdb cmd).
Bump them to avoid ABI breakage.
See: https://github.com/openzfs/zfs/pull/11817
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16609
`zvol_rename_minors()` needs to be given the full path not just the
snapshot name. Use code removed in a0bd735ad as a guide
to providing the necessary values.
Add ZTS check for /dev changes after snapshot rename. After
renaming a snapshot with 'snapdev=visible' ensure that the /dev
entries are updated to reflect the rename.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Closes#14223Closes#16600
In PR #16599 I used 'return' like in C - which is wrong :/
This fix generates the summary as needed.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16611
Current CI is failing on FreeBSD 13.4-STABLE, because samba4 can't be
installed there. Lets remove it for now.
Update also the FreeBSD version definitions a bit.
The naming is like this now:
FreeBSD variants:
- freebsd13-3r, freebsd13-4r, freebsd14-0r, freebsd14-1r (RELEASE)
- freebsd13-4s, freebsd14-1s (STABLE)
- freebsd15-0c (CURRENT)
RHL based distros:
- almalinux8, almalinux9, centos-stream9, fedora39, fedora40
Debian based:
- debian11, debian12, ubuntu20, ubuntu22, ubuntu24
Misc Linux distros:
- archlinux, tumbleweed
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16610
Increase the version to 2.3.99 to indicate the master branch is
newer than the 2.3.x release. This ensures packages built from
master branch are considered to be newer than the last release.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Running native-deb* targets in parallel via make is not supported.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#14736
Properly distribute files for native Debian packages. This fixes the
issue with broken release tarballs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15404
Closes#15586
Our code reading/writing there may not handle misaligned accesses
on a platforms that may care about it. I don't see a point to
complicate it to satisfy UBSan in CI. This alignment costs nothing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15921Closes#16606
Since arc_evict() run can take some time, arc_c change during it
may result in undesired shift in ARC states balance. Primarily in
case of arc_c reduction it may cause eviction from MFU data state
despite its being below the target already. Instead we should
evict as originally planned and if needed do another round after.
Reviewed-by: Theera K. <tkittich@hotmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16576Closes#16605
Restart a resilver from scratch, if the current one in progress is
below a new tunable, zfs_resilver_defer_percent (defaulting to 10%).
The original rationale for deferring additional resilvers, when there is
already one in progress, was to help achieving data redundancy sooner
for the data that gets scanned at the end of the resilver.
But in case the admin wants to attach multiple disks to a single vdev,
it wasn't immediately obvious the admin is supposed to run
`zpool resilver` afterwards to reset the deferred resilvers and start
a new one from scratch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#15810
There are cases, where some needed files for the summary page aren't
created. Currently the whole Summary Page creation will fail then.
Sample run: https://github.com/openzfs/zfs/actions/runs/11148248072/job/30999748588
Fix this, by properly checking for existence of the needed files.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16599
Add an openzfs-2.3 compatibility file for the next release.
While there are no compatibility difference between Linux and
FreeBSD for 2.3 symlinks for the -linux and -freebsd names are
created for any scripts expecting that convention.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16588
In a4b21eadec we added the zap_micro_max_size tuneable to raise the size
at which "micro" (single-block) ZAPs are upgraded to "fat" (multi-block)
ZAPs. Before this, a microZAP was limited to 128KiB, which was the old
largest block size. The side effect of raising the max size past 128KiB
is that it be stored in a large block, requiring the large_blocks
feature.
Unfortunately, this means that a backup stream created without the
--large-block (-L) flag to zfs send would split the microZAP block into
smaller blocks and send those, as is normal behaviour for large blocks.
This would be received correctly, but since microZAPs are limited to the
first block in the object by definition, the entries in the later blocks
would be inaccessible. For directory ZAPs, this gives the appearance of
files being lost.
This commit adds a feature flag, large_microzap, that must be enabled
for microZAPs to grow beyond 128KiB, and which will be activated the
first time that occurs. This feature is later checked when generating
the stream and if active, the send operation will abort unless
--large-block has also been requested.
Changing the limit still requires zap_micro_max_size to be changed. The
state of this flag effectively sets the upper value for this tuneable,
that is, if the feature is disabled, the tuneable will be clamped to
128KiB.
A stream flag is also added to ensure that the receiver also activates
its own feature flag upon receiving the stream. This is not strictly
necessary to _use_ the received microZAP, since it doesn't care how
large its block is, but it is required to send the microZAP object on,
otherwise the original problem occurs again.
Because it's difficult to reliably distinguish a microZAP from a fatZAP
from outside the ZAP code, and because it seems unlikely that most
users are affected (a fairly niche tuneable combined with what should be
an uncommon use of send), and for the sake of expediency, this change
activates the feature the first time a microZAP grows to use a large
block, and is never deactivated after that. This can be improved in the
future.
This commit changes nothing for existing pools that already have large
microZAPs. The feature will not be retroactively applied, but will be
activated the next time a microZAP grows past the limit.
Don't use large_blocks feature for enable/disable tests. The
large_microzap depends on large_blocks, so it gets enabled as a
dependency, breaking the test. Instead use feature "longname", which has
the exact same feature characteristics.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16593
While some remaining issues are resolved with the recently merged
Direct IO functionality disable it by default.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16597
In some environments, just making the .zfs control dir hidden from sight
might not be enough. In particular, the following scenarios might
warrant not allowing access at all:
- old snapshots with wrong permissions/ownership
- old snapshots with exploitable setuid/setgid binaries
- old snapshots with sensitive contents
Introducing a new 'disabled' value that not only hides the control dir,
but prevents access to its contents by returning ENOENT solves all of
the above.
The new property value takes advantage of 'iuv' semantics ("ignore
unknown value") to automatically fall back to the old default value when
a pool is accessed by an older version of ZFS that doesn't yet know
about 'disabled' semantics.
I think that technically the zfs_dirlook change is enough to prevent
access, but preventing lookups and dir entries in an already opened .zfs
handle might also be a good idea to prevent races when modifying the
property at runtime.
Add zfs_snapshot_no_setuid parameter to control whether automatically
mounted snapshots have the setuid mount option set or not.
this could be considered a partial fix for one of the scenarios
mentioned in desired.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Co-authored-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#3963Closes#16587
Compiling with -O0 (no proper optimizations), strlen() call
in loops for comparing the size, isn't being called/initialized
before the actual loop gets started, which causes n-numbers of
strlen() calls (as long as the string is). Keeping the length
before entering in the loop is a good idea.
On some places, even with -O2, both GCC and Clang can't
recognize this pattern, which seem to happen in an array
of char pointer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: rilysh <nightquick@proton.me>
Closes#16584
torvalds/linux@09022bc196 removes the flag, and the corresponding
SetPageError() and ClearPageError() macros, with no replacement offered.
Going back through the upstream history, use of this flag has been
gradually removed over the last year as part of the long tail of
converting everything to folios. Interesting tidbit comments from
torvalds/linux@29e9412b25 and torvalds/linux@420e05d0de suggest that
this flag has not been used meaningfully since page writeback failures
started being recorded in errseq_t instead (the whole "fsyncgate" thing,
~2017, around torvalds/linux@8ed1e46aaf).
Given that, it's possible that since perhaps Linux 4.13 we haven't been
getting anything by setting the flag. I don't know if that's true and/or
if there's something we should be doing instead, but my gut feel is that
its probably fine we only use the page cache as a proxy to allow mmap()
to work, rather than backing IO with it.
As such, I'm expecting that removing this will do no harm, but I'm
leaving it in for older kernels to maintain status quo, and if there is
an overall better way, that is left for a future change.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
linux/torvalds@11068e0b64 removes it, suggesting this was a always
there as a helper to handle concurrent seeks, which all filesystems now
handle themselves if necessary.
Without looking into the mechanism, I can imagine how it might have been
used, but we have always set it to zero and never read from it,
presumably because we've always tracked per-caller position through the
znode anyway. So I don't see how there can be any functional change for
us by removing it. I've stayed conservative though and left it in for
older kernels, since its clearly not hurting anything there.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
torvalds/linux@641bb4394f asserts that this is a static flag, not
intended to be variable per-file, so it moves it to
file_operations instead. We just change our check to follow.
No configure check is necessary because FOP_UNSIGNED_OFFSET didn't exist
before this commit, and FMODE_UNSIGNED_OFFSET flag is removed in the
same commit, so there's no chance of a conflict.
It's not clear to me that we need this check at all, as we never set
this flag on our own files, and I can't see any way that our llseek
handler could recieve a file from another filesystem. But, the whole
zpl_llseek() has a number of opportunities for pleasing cleanup that are
nothing to do with this change, so I'll leave that for a future change.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
See torvalds/linux@a2b80ce87a. It claims the task arg is always
`current`, and so it is with us, so this is a safe change to make. The
only spanner is that we also support the older pre-5.17 3-arg
dequeue_signal() which had different meaning, so we have to check the
types to get the right one.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
torvalds/linux@b2e7456b5c makes kmem_cache_create() a macro, which
gets in the way of our our own redefinition, so we undef the macro first
for our own clients. This follows what we did for kmem_cache_alloc(),
see e951dba48.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16582
This patch adds the ability for zfs to support file/dir name up to 1023
bytes. This number is chosen so we can support up to 255 4-byte
characters. This new feature is represented by the new feature flag
feature@longname.
A new dataset property "longname" is also introduced to toggle longname
support for each dataset individually. This property can be disabled,
even if it contains longname files. In such case, new file cannot be
created with longname but existing longname files can still be looked
up.
Note that, to my knowledge native Linux filesystems don't support name
longer than 255 bytes. So there might be programs not able to work with
longname.
Note that NFS server may needs to use exportfs_get_name to reconnect
dentries, and the buffer being passed is limit to NAME_MAX+1 (256). So
NFS may not work when longname is enabled.
Note, FreeBSD vfs layer imposes a limit of 255 name lengh, so even
though we add code to support it here, it won't actually work.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#15921
This patch is preparatory work for long name feature. It changes all
users of zap_attribute_t to allocate it from kmem instead of stack. It
also make zap_attribute_t and zap_name_t structure variable length.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#15921
Specifically, a child in a replacing vdev won't count when assessing
the dtl during a vdev_fault()
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16569
The docs for drr_versioninfo have marked the top 32 bits as "reserved"
since its introduction (illumos/illumos-gate@9e69d7d). There's no
indication of why they're reserved, so it seems uncontroversial to make
a lot more flags available.
I'm keeping the top eight reserved, and explicitly calling them out as
such, so we can extend the header further in the future if we run out of
flags or want to do some kind of change that isn't about feature flags.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15454
Update the META file to reflect compatibility with the 6.11 kernel.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16586
Linux 6.10+ with CONFIG_FORTIFY_SOURCE notices memcpy() accessing past
the end of TString, because it has no indication that there there may be
an additional allocation there.
There's no appropriate upstream change for this (ancient) version of
Lua, so this is the narrowest change I could come up with to add a flex
array field to the end of TString to satisfy the check. It's loosely
based on changes from lua/lua@ca41b43f and lua/lua@9514abc2.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16541Closes#16583
Reflect f2330bd156
change in our man pages and add some context.
Wording is primarily copy-pasted from code comments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#16581
For data integrity checks as done in ZTS, the verification for
unintended data corruption with xxhash128 should be a lot faster
and perfectly usable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16577
Update the test case to freeze the pool then export it to better
simulate a hard failure. This is preferable to copying the vdev
while the pool's imported since with a copy we're not guaranteed
the on-disk state will be consistent. That can in turn result
in a pool import failure and a spurious test failure.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16578
ZIL log record structs (lr_XX_t) are frequently allocated with extra
space after the struct to carry variable-sized "payload" items.
Linux 6.10+ compiled with CONFIG_FORTIFY_SOURCE has been doing runtime
bounds checking on memcpy() calls. Because these types had no indicator
that they might use more space than their simple definition,
__fortify_memcpy_chk will frequently complain about overruns eg:
memcpy: detected field-spanning write (size 7) of single field
"lr + 1" at zfs_log.c:425 (size 0)
memcpy: detected field-spanning write (size 9) of single field
"(char *)(lr + 1)" at zfs_log.c:593 (size 0)
memcpy: detected field-spanning write (size 4) of single field
"(char *)(lr + 1) + snamesize" at zfs_log.c:594 (size 0)
memcpy: detected field-spanning write (size 7) of single field
"lr + 1" at zfs_log.c:425 (size 0)
memcpy: detected field-spanning write (size 9) of single field
"(char *)(lr + 1)" at zfs_log.c:593 (size 0)
memcpy: detected field-spanning write (size 4) of single field
"(char *)(lr + 1) + snamesize" at zfs_log.c:594 (size 0)
memcpy: detected field-spanning write (size 7) of single field
"lr + 1" at zfs_log.c:425 (size 0)
memcpy: detected field-spanning write (size 9) of single field
"(char *)(lr + 1)" at zfs_log.c:593 (size 0)
memcpy: detected field-spanning write (size 4) of single field
"(char *)(lr + 1) + snamesize" at zfs_log.c:594 (size 0)
To fix this, this commit adds flex array fields to all lr_XX_t structs
that require them, and then uses those fields to access that
end-of-struct area rather than more complicated casts and pointer
addition.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16501Closes#16539
Lower the minimum number of expected deadman events from 4 to 3. All
that is strictly required is a single event to consider the test a
pass. However, since I've never seen a count of less than 3 reported
by the CI that should be sufficient.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16575
