There were never any users and it so happens the operation is not even
supported by rrm locks -- the macros were wrong for Linux and FreeBSD
when not using it's RMS locks.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#13906
Provides the missing full barrier variant to the membar primitive set.
While not used right now, this is probably going to change down the
road.
Name taken from Solaris, to follow the existing routines.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#13907
get_user_ns() is only done once for each namespace, so put_user_ns()
should be done once too.
Fix two typos in user_namespace/user_namespace_002.ksh and
user_namespace/user_namespace_003.ksh.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#13918
Commit ecd6cf800b63704be73fb264c3f5b6e0dafc068d by marks in OpenSolaris
at Tue Jun 26 07:44:24 2007 -0700 introduced a bug where we fail to call
`va_end()` before returning.
The man page for va_start() says:
"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."
Coverity complained about this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13904
Coverity complained about this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13903
For encrypted raw receive, objset creation is delayed until a call to
dmu_recv_stream(). ZFS_PROP_SHARESMB property requires objset to be
populated when calling zpl_earlier_version(). To correctly handle the
ZFS_PROP_SHARESMB property for encrypted raw receive, this change
delays setting the property.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13878
The FreeBSD project's coverity scans found dead code in `zfs_readdir()`.
Also, the comment above `zfs_readdir()` is out of date.
I fixed the comment and deleted all of the dead code, plus additional
dead code that was found upon review.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13924
The FreeBSD project's coverity scans found this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13923
Coverity caught a possible NULL pointer dereference in dead code. We can
delete it all.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13900
Coverity complained about the format specifiers not matching variables.
In one case, the variable is a constant, so we fix it. In another, we
were missing an argument (about which coverity also complained).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13888
Coverity reported that we pass a pointer to zfsvfs to
`dmu_objset_disown()` after freeing zfsvfs in zfsvfs_create_impl() after
a failure in zfsvfs_init().
We have nearly identical duplicate versions of this code for FreeBSD and
Linux, but interestingly, the FreeBSD version of this code differs in
such a way that it does not suffer from this bug. We remove the
difference from the FreeBSD version to fix this bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13883
param_set_arc_free_target(SYSCTL_HANDLER_ARGS) and
param_set_arc_no_grow_shift(SYSCTL_HANDLER_ARGS) defined in
sysctl_os.c must be made available to arc_os.c.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes#13915
There is an ongoing effort to eliminate this feature.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#13908
Add needed cpu feature tests for powerpc architecture.
Overview:
zfs_altivec_available() - needed by RAID-Z
zfs_vsx_available() - needed by BLAKE3
zfs_isa207_available() - needed by SHA2
Part 1 - Userspace
- use getauxval() for Linux and elf_aux_info() for FreeBSD
- direct including <sys/auxv.h> fails with double definitions
- so we self define the needed functions and definitions
Part 2 - Kernel space FreeBSD
- use exported cpu_features of <powerpc/cpu.h>
Part 3 - Kernel space Linux
- use cpu_has_feature() function of <asm/cpufeature.h>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13725
The zfs module parameter zfs_blake3_impl got no manual page entry while
adding BLAKE3 to OpenZFS. This commit adds the required notes about the
parameter into zfs.4
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ryan Moeller <ryan@freqlabs.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13725
Apply similar options to BLAKE3 as it is done for zfs_fletcher_4_impl.
The zfs module parameter on Linux changes from icp_blake3_impl to
zfs_blake3_impl.
You can check and set it on Linux via sysfs like this:
```
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle [fastest] generic sse2 sse41 avx2
[bash]# echo sse2 > /sys/module/zfs/parameters/zfs_blake3_impl
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic [sse2] sse41 avx2
```
The modprobe module parameters may also be used now:
```
[bash]# modprobe zfs zfs_blake3_impl=sse41
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic sse2 [sse41] avx2
```
On FreeBSD the BLAKE3 implementation can be set via sysctl like this:
```
[bsd]# sysctl vfs.zfs.blake3_impl
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2
[bsd]# sysctl vfs.zfs.blake3_impl=sse2
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2 \
-> cycle fastest generic [sse2] sse41 avx2
```
This commit changes also some Blake3 internals like these:
- blake3_impl_ops_t was renamed to blake3_ops_t
- all functions are named blake3_impl_NAME() now
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13725
The zpl_fadvise() function was recently added and was not included
in the initial patch. Update it accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13831
Coverity caught these.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13889
Add a meaningful error message for ECKSUM to common error messages.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#6805Closes#13808Closes#13898
- Some optimizations for bqueue enqueue/dequeue.
- Added a fix to prevent deadlock when both bqueue_enqueue_impl()
and bqueue_dequeue() waits for signal to be triggered.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13855
`uu_panic()` needs to be modelled and the definition of `vpanic()` from
the original coverity model was missing
`__coverity_format_string_sink__()`.
We also model `libspl_assertf()` as part of an attempt to eliminate
false positives.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13901
Don't return error in nfs_disable_share when nfs is not available, since
it wouldn't have been able to share in the first place.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#13534Closes#13800
Replace ZFS_ENTER and ZFS_VERIFY_ZP, which have hidden returns, with
functions that return error code. The reason we want to do this is
because hidden returns are not obvious and had caused some missing fail
path unwinding.
This patch changes the common, linux, and freebsd parts. Also fixes
fail path unwinding in zfs_fsync, zpl_fsync, zpl_xattr_{list,get,set}, and
zfs_lookup().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#13831
I see a few issues in the issue tracker that might be aided by being
able to turn this on. We have no module parameter for it, so I would
like to add one.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13874
We pass sizeof (struct redact_record *) rather than sizeof (struct
redact_record). Passing the pointer size is wrong.
Coverity caught this in two places.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13885
The assertions are racy and the use of `membar_exit()` did nothing to
fix that.
The helpers use atomic functions, so we cleverly get values from the
atomics that we can use to ensure that the assertions operate on the
correct values.
We also use `membar_producer()` prior to decrementing reference counts
so that operations that happened prior to a decrement to 0 will be
guaranteed to happen before the decrement on architectures that reorder
atomics.
This also slightly improves performance by eliminating unnecessary
reads, although I doubt it would be measurable in any benchmark.
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13880
zfs_unshare_006 checks to see if a dataset still has an active SMB
share after doing an NFS unshare -a. The test could fail because the
check for the SMB share does not expect dashes in a dataset name to be
converted to underscores as pathname delimiters are.
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes#13893
Other projects such as the python project include their coverity models
in their repositories. This provides transparency, which is beneficial
in open source projects. Therefore, it is a good idea to include the
coverity model in our repository too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13884
These were reported by Coverity as "Read from pointer after free" bugs.
Presumably, it did not report it as a use-after-free bug because it does
not understand the inline assembly that implements the atomic
instruction.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13881
Recently Github action runners started to fail on kmod build.
Revert --with-config=dist from ./configure section of github
runners to stabilize CI for now.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#13894
When reviewing #13875, I noticed that our FreeBSD code has an issue
where it converts from `int64_t` to `int` when calling
`vnlru_free{,_vfsops}()`. The result is that if the int64_t is `1 <<
36`, the int will be 0, since the low bits are 0. Even when some low
bits are set, a value such as `((1 << 36) + 1)` would truncate to 1,
which is wrong.
There is protection against this on 32-bit platforms, but on 64-bit
platforms, there is no check to protect us, so we add a check.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13882
Coverity pointed out that if we somehow receive SPA_FEATURE_NONE, we
will use a negative number as an array index. A defensive assertion
seems appropriate.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13872
Coverity complains about a "use-after-free" bug in
`dbuf_prefetch_indirect_done()` because we use a pointer value after
freeing its buffer. The pointer is used for refcounting in ARC (as the
reference holder). There is a theoretical situation where the pointer
would be reused in a way that causes the refcounting to collide, so we
change the order in which we call arc_buf_destroy() and
dbuf_prefetch_fini() to match the rest of the function. This prevents
the theoretical situation from being a possibility.
Also, we have a few return statements with a value, despite this being a
void function. We clean those up while we are making changes here.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13869
Coverity found this. We attempted to free tmp, which is a pointer to a
string that should be freed by the caller.
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13864
We inherited membar_consumer() and membar_producer() from OpenSolaris,
but we had replaced membar_consumer() with Linux's smp_rmb() in
zfs_ioctl.c. The FreeBSD SPL consequently implemented a shim for the
Linux-only smp_rmb().
We reinstate membar_consumer() in platform independent code and fix the
FreeBSD SPL to implement membar_consumer() in a way analogous to Linux.
Reviewed-by: Konstantin Belousov <kib@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13843
Coverity found this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13863
Unused code detected by coverity.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13868
Otherwise, `strlcat()` can overflow them.
Coverity found this.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13866
Coverity reported this as an out-of-bounds read.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13865
Coverity found a file descriptor leak. Eyeballing it showed that we had
no handling for the `open()` call failing either. We can address both of
these at once.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13862
Coverty static analysis found these.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#10989Closes#13861
In our codebase, `cond_resched() and `schedule()` are Linux kernel
functions that have replaced the OpenSolaris `kpreempt()` functions in
the codebase to such an extent that `kpreempt()` in zfs_context.h was
broken. Nobody noticed because we did not actually use it. The header
had defined `kpreempt()` as `yield()`, which works on OpenSolaris and
Illumos where `sched_yield()` is a wrapper for `yield()`, but that does
not work on any other platform.
The FreeBSD platform specific code implemented shims for these, but the
shim for `schedule()` forced us to wait, which is different than merely
rescheduling to another thread as the original Linux code does, while
the shim for `cond_resched()` had the same definition as its kernel
kpreempt() shim.
After studying this, I have concluded that we should reintroduce the
kpreempt() function in platform independent code with the following
definitions:
- In the Linux kernel:
kpreempt(unused) -> cond_resched()
- In the FreeBSD kernel:
kpreempt(unused) -> kern_yield(PRI_USER)
- In userspace:
kpreempt(unused) -> sched_yield()
In userspace, nothing changes from this cleanup. In the kernels, the
function `fm_fini()` will now call `kern_yield(PRI_USER)` on FreeBSD and
`cond_resched()` on Linux. This is instead of `pause("schedule", 1)` on
FreeBSD and `schedule()` on Linux. This makes our behavior consistent
across platforms.
Note that Linux's SPL continues to use `cond_resched()` and
`schedule()`. However, those functions have been removed from both the
FreeBSD code and userspace code.
This should have the benefit of making it slightly easier to port the
code to new platforms by making how things should be mapped less
confusing.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#13845
The are a few cases where stale entries in /etc/exports.d/zfs.exports
will cause the nfs-server service to fail when starting up.
Since the nfs-server startup consumes /etc/exports.d/zfs.exports, the
zfs-share service (which rebuilds the list of zfs exports) should run
before the nfs-server service.
To make the zfs-share service resilient to stale exports, this change
truncates the zfs config file as part of the zfs share -a operation.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#13775
The function make_dev_s() was introduced to replace make_dev() in
FreeBSD 11.0. It allows further specification of properties and flags
and returns an error code on failure. Using this we can fail loading
the module more gracefully than a panic in situations such as when a
device named zfs already exists. We already use it for zvols.
Use make_dev_s() for /dev/zfs.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#13854
Users were seeing floods of `config_sync` events when autoexpand was
enabled. This happened because all "disk status change" udev events
invoke the autoexpand codepath, which calls zpool_relabel_disk(),
which in turn cause another "disk status change" event to happen,
in a feedback loop. Note that "disk status change" happens every time
a user calls close() on a block device.
This commit breaks the feedback loop by only allowing an autoexpand
to happen if the disk actually changed size.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #7132Closes: #7366Closes#13729
When iterating through children physical ashifts for vdev, prefer
ones above the maximum logical ashift, that we can actually use,
but within the administrator defined maximum.
When selecting top-level vdev ashift, do not set it to the defined
maximum in case physical ashift is even higher, but just ignore one.
Using the maximum does not prevent misaligned writes, but reduces
space efficiency. Since ZFS tries to write data sequentially and
aggregates the writes, in many cases large misanigned writes may be
not as bad as the space penalty otherwise.
Allow internal physical ashifts for vdevs higher than SHIFT_MAX.
May be one day allocator or aggregation could benefit from that.
Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB),
so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB),
but only if it really has to or explicitly told to, but not as an
"optimization".
There are some read-intensive NVMe SSDs that report Preferred Write
Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a
space inefficiency that can't be justified. Instead these changes
make ZFS fall back to logical ashift of 12 (4KB) by default and
only warn user that it may be suboptimal for performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#13798
The purpose of this PR is to accepts fadvise ioctl from userland
to do read-ahead by demand.
It could dramatically improve sequential read performance especially
when primarycache is set to metadata or zfs_prefetch_disable is 1.
If the file is mmaped, generic_fadvise is also called for page cache
read-ahead besides dmu_prefetch.
Only POSIX_FADV_WILLNEED and POSIX_FADV_SEQUENTIAL are supported in
this PR currently.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Finix Yan <yancw@info2soft.com>
Closes#13694
