Log function should be "log_fail", rather than "log_failED"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: legend-hua <liu.hua130@zte.com.cn>
Closes#5300
The file tests/zfs-tests/tests/stress/Makefile.am gets mistakenly
removed by the distclean target because it's empty. Adding a
`SUBDIRS =` line prevents the removal.
This directory is being preserved as the location to add assorted
stress tests. These may include but are not limited to.
http://kernel.ubuntu.com/~cking/stress-ng/https://github.com/zfsonlinux/zfsstress/
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5308
In torvalds/linux@31051c8 the inode_change_ok() function was
renamed setattr_prepare() and updated to take a dentry ratheri
than an inode. Update the code to call the setattr_prepare()
and add a wrapper function which call inode_change_ok() for
older kernels.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Requires-spl: refs/pull/581/head
In Linux 4.9, torvalds/linux@fd50eca, iops->{set,get,remove}xattr and
generic_{set,get,remove}xattr are removed. xattr operations will directly
go through sb->s_xattr.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
In Linux 4.9, torvalds/linux@2773bf0, iops->rename() and iops->rename2() are
merged together into iops->rename(), it now wants flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
These operations are dir specific, there's no point putting them in
zpl_inode_operations which is for regular files.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
1. Enable multipath autoreplace support for FMA.
This extends FMA autoreplace to work with multipath disks. This
requires libdevmapper to be installed at build time.
2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online
Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure
LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must
be supported by the Linux SES driver for this to work. The enclosure LED
scripts work for multipath devices as well. The scripts will clear the LED
when the fault is cleared.
3. Rate limit ZIO delay and checksum events so as not to flood ZED
ZIO delay and checksum events are rate limited to 5/sec in the zfs module.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#2449Closes#3017Closes#5159
CID 150926: Unchecked return value (CHECKED_RETURN)
- This case cannot occur given the existing taskq implementation
and flags passed to task_dispatch().
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5272
Accidentally introduced by 3dfb57a, when building with debugging
disabled several variables are unused. Resolve this by wrapping
them in ASSERTV to remove them for non-debug builds.
Reviewed by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5284
CID 147643: Type: String not null terminated
- make sure that the string is null terminated before strlen
and fprintf.
CID 152204: Type: Copy into fixed size buffer
- since strlcpy isn't availabe here, use strncpy and terminate
the string manually.
CID 49339: Type: Buffer not null terminated
- since strlcpy isn't availabe here, terminate the string
manually before fprintf.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5283
Generate a symlink in the current working directory to
test-runner.py output. This will make it easier for the
ZFS buildbot to collect logs.
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#5293
CID 150924: Unchecked return value (CHECKED_RETURN)
- On taskq_dispatch failure the reference must be dropped and
this entry can be safely skipped. This case should be impossible
in the existing implementation but should be handled regardless.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5278
When Dracut starts up, it needs to determine whether a pool will remain
"hanging open" before the system shuts off. In such a case, then the
code to clean up the pool (using the previous export -F work) must
be invoked. Since Dracut has had a recent change that makes
mount-zfs.sh simply not run when the root dataset is already mounted,
we must use the cleanup hook to order Dracut to do shutdown cleanup.
Important note: this code will not accomplish its stated goal until this
bug is fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1385432
That bug impacts more than just ZFS. It impacts LUKS, dmraid, and
unmount during poweroff. It is a Fedora-wide bug.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Closes#5287
First rename spare_cbdata_t cb -> spare_cb in print_status_config(),
to free up cb.
Using the structure removes the explicit parameters namewidth
and name_flags from several functions. Also use status_cbdata_t
for print_import_config(). This simplifies print_logs().
Remove the parameter 'verbose' for print_logs(). It does not really
mean verbose, it selected between the print_status_config and
print_import_config() paths. This selection is now done by
cb_print_config of spare_cbdata_t.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Håkan Johansson <f96hajo@chalmers.se>
Closes#5259
When pools are assembled from partitions, vdev_id.conf aliases
do not work. The directory /dev/disk/by-vdev is not created because
the associated udev rule for parsing vdev_id.conf is never called.
Extend to logic to match "disk" and "partition".
Patch-proposed-by: @sparksh
Reviewed-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3859Closes#5266
Authored by: Akash Ayare <aayare@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Reviewed-by: yuxiang <guo.yong33@zte.com.cn>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Bug was caused due to a change in functionality. At some point, ZFS
snapshots no longer created associated device files which were being
used in the test. To resolve this issue, a clone of the snapshot can be
produced which will also create the expected device files; then, the
test will behave as it did historically.
OpenZFS-issue: https://www.illumos.org/issues/6877
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2200f27Closes#5275
Porting Notes:
- Hardcoded /dev/zvol/rdsk changed to $ZVOL_RDEVDIR for compatibility.
- Enabled in linux runfile.
These tests all pass once updated to wait for udev to create the
expected linked under /dev/zvol/.
Reviewed-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Reviewed-by: yuxiang <guo.yong33@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5275
In this test the 'ls -ls' command was used to print testfile size in
blocks. Because the environment variable BLOCK_SIZE was set
the 'ls -ls' command detected this and output its block count as the
number of 8192 blocks. Rather than change the variable name
the -k was was added to force ls to return 1k blocks. This has the
additional advantage of behaving consistently across platforms.
For additional details on GNU 'ls' behavior regarding block size:
https://www.gnu.org/software/coreutils/manual/html_node/Block-size.html
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5269
The zfs_receive_011_pos test can be enabled now that OpenZFS 6562
has been merged.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5276
OpenZFS 7090 - zfs should throttle allocations
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Ported-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
When write I/Os are issued, they are issued in block order but the ZIO
pipeline will drive them asynchronously through the allocation stage
which can result in blocks being allocated out-of-order. It would be
nice to preserve as much of the logical order as possible.
In addition, the allocations are equally scattered across all top-level
VDEVs but not all top-level VDEVs are created equally. The pipeline
should be able to detect devices that are more capable of handling
allocations and should allocate more blocks to those devices. This
allows for dynamic allocation distribution when devices are imbalanced
as fuller devices will tend to be slower than empty devices.
The change includes a new pool-wide allocation queue which would
throttle and order allocations in the ZIO pipeline. The queue would be
ordered by issued time and offset and would provide an initial amount of
allocation of work to each top-level vdev. The allocation logic utilizes
a reservation system to reserve allocations that will be performed by
the allocator. Once an allocation is successfully completed it's
scheduled on a given top-level vdev. Each top-level vdev maintains a
maximum number of allocations that it can handle (mg_alloc_queue_depth).
The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth)
are distributed across the top-level vdevs metaslab groups and round
robin across all eligible metaslab groups to distribute the work. As
top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.
OpenZFS-issue: https://www.illumos.org/issues/7090
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7Closes#5258
Porting Notes:
- Maintained minimal stack in zio_done
- Preserve linux-specific io sizes in zio_write_compress
- Added module params and documentation
- Updated to use optimize AVL cmp macros
The refquota_002_pos and refquota_004_pos test cases can pass
without modification.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5273
coverity scan CID:147654,type: Copy into fixed size buffer
- string operation may write past the end of the fixed-size
destination buffer
coverity scan CID:147690,type: Uninitialized scalar variable
- call zfs_prop_get first in case we use sourcetype and
share_sourcetype without initialization
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5253
The ICP requires destructors to for each crypto module that is added.
These do not necessarily exist in Illumos because they assume that
these modules can never be unloaded from the kernel. Some of this
cleanup code was missed when #4760 was merged, resulting in leaks.
This patch simply fixes that.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #4760Closes#5265
coverity scan CID:147452, Type:Unchecked return value from library
coverity scan CID:147447, Type:Unchecked return value from library
coverity scan CID:147446, Type:Unchecked return value from library
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes#5264
When the exception branch exits, the buf is leaked.
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes#5262
Fix use after free in zfsctl_snapshot_unmount(). Use /usr/bin/env
instead of /bin/sh to fix a shell code injection flaw and allow use
with grsecurity.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Stian Ellingsen <stian@plaimi.net>
Closes#5250Closes#4377
The zfs_snapshot_008_neg test case does not use nested pools and
can be safely enabled. The zfs_snapshot_009_pos test case is
also passing without modification.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5260
Enable reservation_012_pos, reservation_015_pos and reservation_016_pos
test cases which are passing.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Closes#5254
When array is passed as a parameter it degenerates into a
pointer so the sizeof(path) in is_shorthand_path() and always
get return value of 8, instead of the string length we want.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Closes#5198
This is as much an upstream compatibility as it's a bit of a performance
gain.
The illumos taskq implemention doesn't allow a TASKQ_THREADS_CPU_PCT type
to be dynamic and in fact enforces as much with an ASSERT.
As to performance, if this taskq is dynamic, it can cause excessive
contention on tq_lock as the threads are created and destroyed because it
can see bursts of many thousands of tasks in a short time, particularly
in heavy high-concurrency zvol write workloads.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#5236
When #4760 was merged tests were added to ensure that the new checksums
were working properly. However, some of the functionality for sha2
functions were not ported over, resulting in some Coverity defects and
code that would be unstable when needed in the future. This patch
simply ports over the missing code and fixes the defects in the
process.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #4760Closes#5251
Enable readonly_001_pos this test is now passing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ChaoyuZhang <zhang.chaoyu@zte.com.cn>
The following new test cases need to have execute permissions set:
userquota/groupspace_003_pos.ksh
userquota/userquota_013_pos.ksh
userquota/userspace_003_pos.ksh
upgrade/upgrade_userobj_001_pos.ksh
upgrade/setup.ksh
upgrade/cleanup.ksh
The following source files accidentally were marked executable:
lib/libzpool/kernel.c
lib/libshare/nfs.c
lib/libzfs/libzfs_dataset.c
lib/libzfs/libzfs_util.c
tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c
tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c
cmd/zed/zed_exec.c
module/icp/core/kcf_sched.c
module/zfs/dsl_pool.c
module/zfs/arc.c
module/nvpair/nvpair.c
man/man5/zfs-module-parameters.5
Reviewed-by: GeLiXin <ge.lixin@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5241
Call mount and umount via /usr/bin/env instead of /bin/sh in
zfsctl_snapshot_mount() and zfsctl_snapshot_unmount().
This change fixes a shell code injection flaw. The call to /bin/sh
passed the mountpoint unescaped, only surrounded by single quotes. A
mountpoint containing one or more single quotes would cause the command
to fail or potentially execute arbitrary shell code.
This change also provides compatibility with grsecurity patches.
Grsecurity only allows call_usermodehelper() to use helper binaries in
certain paths. /usr/bin/* is allowed, /bin/* is not.
OpenZFS decided that ignore_hole_birth was too imprecise and
incorrect a name (and went with send_holes_without_birth_time).
Rename it in ZoL too, while keeping the name "ignore_hole_birth"
pointing to the same variable for existing consumers.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#5239
Updating vd->vdev_parent->vdev_nonrot in vdev_open_child()
is a race when vdev_open_child is called for many children
from a task queue.
vdev_open_child() is only called by vdev_open_children(), let
the latter update the parent vdev_nonrot member. The update
was already there, so done twice previously. Thus using the
same logic at the end in vdev_open_children() to update
vdev_nonrot, either we are vdev_uses_zvols() or not.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5162
Fixes ABI issues with fletcher4 code, adds support for
incremental updates, and adds ztest method for testing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes#5164
The variable snapprops_nvlist was never initialized, so properties
were not applied to the received snapshot.
Additionally, add zfs_receive_013_pos.ksh script to ZFS test suite to exercise
'zfs receive' functionality for user properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#4338
