Cleanly destroying or exporting a pool requires that the pool
not be suspended. Therefore, set the POOL_CHECK_SUSPENDED flag
for these ioctls so the utilities will output a descriptive
error message rather than block.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2878
Under Linux, at least, dladdr() doesn't reliably work for functions which
aren't in a DSO. Add the function name to ztest_info[].
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3130
The function zfs_nicenum that converts number to human-readable output
uses a index to a string of letters. This patch limits the index to
the length of the string.
Signed-off-by: Christer Ekholm <che@chrekh.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3122
In the original implementation of the SPL wrappers were provided
for module initialization and cleanup. This was done to abstract
away any compatibility code which might be needed for the SPL.
As it turned out the only significant compatibility issue was that
the default pwd during module load differed under Illumos and Linux.
Since this is such as minor thing and the wrappers complicate the
code they are being retired.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2985
As described in flags section of open(2):
O_APPEND:
The file is opened in append mode. Before each write(2), the
file offset is positioned at the end of the file, as if with
lseek(2). O_APPEND may lead to corrupted files on NFS filesys-
tems if more than one process appends data to a file at once.
This is because NFS does not support appending to a file, so the
client kernel has to simulate it, which can't be done without a
race condition.
This issue was originally overlooked because normally the generic
VFS code handles this for a filesystem. However, because ZFS explictly
registers a zpl_write() function it's responsible for the seek.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3124
If we are not booting from ZFS, parse-zfs.sh fails because of
an unset variable.
Signed-off-by: Steffen M<C3><BC>thing <steffen.muething@iwr.uni-heidelberg.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3110
The dracut module installs the udev rules and the vdev_id utility for creating
the /dev/disk/by-vdev/ names, but omits some additional utilities and the
config file required by vdev_id.
Signed-off-by: Steffen M<C3><BC>thing <steffen.muething@iwr.uni-heidelberg.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3110
When loading the ZFS kernel modules they should not populate the
spa namespace using the cache file. This behavior isn't consistent
with other Linux kernel modules and we need to move away from it.
Removing this makes the whole startup process predictable with four
basic steps which are driven by the init system.
1) modprobe
2) zpool import
3) zfs mount
4) zfs share
This change also helps lay the groundwork for eventually removing
the kobj_* compatibility code on the kernel side. It may need to
be preserved in userspace because libzfs_init() depends on it.
This is why the conditional must be wrapped with an #ifdef _KERNEL.
Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2820
When a bad DVA is encountered in metaslab_free_dva() the system
should treat it as fatal. This indicates that somehow a damaged
DVA was written to disk and that should be impossible.
However, we have seen a handful of reports over the years of pools
somehow being damaged in this way. Since this damage can render
otherwise intact pools unimportable, and the consequence of skipping
the bad DVA is only leaked free space, it makes sense to provide
a mechanism to ignore the bad DVA. Setting the zfs_recover=1 module
option will cause the DVA to be ignored which may allow the pool to
be imported.
Since zfs_recover=0 by default any pool attempting to free a bad DVA
will treat it as a fatal error preserving the current behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3099
Issue #3090
Issue #2720
Simplify install() by removing the need for a temp file.
Signed-off-by: Soeren Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3093
Use the correct operators to check the expected data type.
Signed-off-by: Soeren Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3093
In dry run mode, zpool should display more of the proposed pool
configuration for "zpool add". This commit adds support for displaying
cache devices.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1106
There have been multiple reports of 'zdb' tripping the VERIFY in
mutex_destroy() because pthread_mutex_destroy() returns EBUSY.
Exactly how this can happen still needs to be explained, but this
doesn't strictly need to be fatal for non-debug builds. Therefore,
this patch converts the VERIFY to an ASSERT until the root cause
is determined and resolved.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2027
dmu_snapshot_list_next stores the index of the next snapshot entry to the offp
argument, which zpl_snapdir_iterate then uses for the dir_emit. This
result in an off-by-one error. Therefore a temporary variable should be
used.
This was a regression introduced in commit zfsonlinux/zfs@0f37d0c.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2930
The zio_cons() constructor and zio_dest() destructor don't exist
in the upstream Illumos code. They were introduced as a workaround
to avoid issue #2523. Since this issue has now been resolved this
code is being reverted to bring ZoL back in sync with Illumos.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #3063
Long ago the zio_bulk_flags module parameter was introduced to
facilitate debugging and profiling the zio_buf_caches. Today
this code works well and there's no compelling reason to keep
this functionality. In fact it's preferable to revert this so
the code is more consistent with other ZFS implementations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #3063
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3084
Several of the nvlist functions may perform allocations larger than
the 32k warning threshold. Convert them to use vmem_alloc() so the
best allocator is used.
Commit efcd79a retired KM_NODEBUG which was used to suppress large
allocation warnings. Concurrently the large allocation warning threshold
was increased from 8k to 32k. The goal was to identify the remaining
locations, such as this one, where the allocation can be larger than
32k. This patch is expected fine tuning resulting for the kmem-rework
changes, see commit 6e9710f.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3057Closes#3079Closes#3081
In order to accelerate zfs receive operations in the face of many
property-containing snapshots, commit 0574855 changed the header nvlist
("fss") of a send stream to exclude snapshots which aren't part of the
stream. This, however, would cause zfs receive -F to erroneously remove
snapshots; it would remove any snapshot which wasn't listed in the header
nvlist.
This patch restores the full list of snapshots in fss[<id>[snaps]] but
still suppresses the properties of non-sent snapshots and also removes a
consistency check in which an error is raised if a listed snapshot does
not have any properties in fss[<id>[snapprops]].
The 0574855 commit also introduced a bug in which zfs send -p of a
complete stream (zfs send -p pool/fs@snap) would exclude the snapshot
properties in fss[<id>[snapprops]]. This patch detects the last snapshot
in a series when no "from" snapshot has been specified and includes its
properties.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2907
Normally when importing a pool the space maps for all top level
vdevs are read from disk. The space maps will be required latter
when an allocation is performed and free blocks need to be located.
However, if the pool is imported readonly then we are guaranteed
that no allocations can occur. In this case the space maps need
not be loaded.. A similar argument can be made for the DTLs
(dirty time logs).
Because a pool import will fail if the space maps cannot be read.
The ability to safely ignore them makes it more likely that a
damaged pool can be imported readonly to recover its contents.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2831
The ability to use blanks is documented in zpool(8) and implemented
in module/zcommon/zfs_namecheck.c:valid_char().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3083
The shell executes each command of a pipeline in a subshell,
thus $ret always had the same value after the while loop that
it had before the loop (http://mywiki.wooledge.org/BashFAQ/024),
signaling success even if some of the zpools could not be exported.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3083
5311 traverse_dnode may report success when it should not
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Will Andrews <willa@spectralogic.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://github.com/illumos/illumos-gate/commit/2a89c2chttps://www.illumos.org/issues/5311
Ported by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2970
The functions sa_find_sizes() and sa_build_layout() fail to account
for the additional 2 bytes of SA header space when calculating whether
a variable size attribute might spill over. They may consequently
determine that an attribute will fit in the bonus buffer along with a
spill block pointer, when in reality the attribute would be partially
overwritten by the spill block pointer if spill over occurs. This also
causes an inconsistency between the SA header size and the number of
variable size attributes in the layout, tripping an assertion when
debugging is on. The following reproducer demonstrates the problem.
ln -s $(perl -e 'print "z" x 20') file
setfattr -h -n trusted.foo -v $(perl -e 'print "z" x 200') file
Even though sa_find_sizes() computes the index of the attribute where
spill-over will occur, sa_build_layouts() discards the result and
recomputes it itself. As it turns out, both functions get it wrong.
Since this computation is awkward and, as history has shown, easy to
screw up, let's just do it in one place. This patch fixes the bug in
sa_find_sizes() and updates sa_build_layout() to use the result
computed there.
Also improve the comments in sa_find_sizes().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3070
When a dbuf is in the DB_EVICTING state it may no longer be on the
dn_dbufs list. In which case it's unsafe to call DB_DNODE_ENTER.
Therefore, any dbuf which is found in this safe must be skipped.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2553Closes#2495
After 53698a4, the following error occurs when make deb.
CCLD zed
../../lib/libzfs/.libs/libzfs.so: undefined reference to `get_system_hostid'
Add libzpool.la to zed/Makefile.am to fix this
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3080
If spl_hostid is set via module parameter, it's likely different from
gethostid(). Therefore, the userspace tool should read it first before
falling back to gethostid().
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3034
Commit 7b2d78a046 fixed some improper uses
of snprintf(), however, in __dbuf_stats_hash_table_data() the return
value of snprintf is propagated to the caller. This caused spurious
ENOMEM errors when reading the dbufs kstat.
This commit causes the actual number of characters written to be returned.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3072
Commit log from FreeBSD:
We have observed that arc_release() can be called concurrently with a
l2arc in-flight write. Also, we have observed that arc_hdr_destroy()
can be called from arc_write_done() for a zio with ZIO_FLAG_IO_REWRITE
flag in similar circumstances.
Previously the l2arc headers would be freed while leaking their
associated compression buffers. Now the buffers are placed on
l2arc_free_on_write list for delayed freeing. This is similar to
what was already done to arc buffers that were supposed to be freed
concurrently with in-flight writes of those buffers.
In addition to fixing the discovered leaks this change also adds
some protective code to assert that a compression buffer associated
with a l2arc header is never leaked.
A new kstat l2_cdata_free_on_write is added. It keeps a count
of delayed compression buffer frees which previously would have
been leaks.
Tested by: Vitalij Satanivskij <satan@ukr.net> et al
Requested by: many
MFC after: 2 weeks
Sponsored by: HybridCluster / ClusterHQ
References:
https://illumos.org/issues/5222https://github.com/freebsd/freebsd/commit/b98f85dhttp://thread.gmane.org/gmane.os.freebsd.current/155757/focus=155781http://lists.open-zfs.org/pipermail/developer/2014-January/000455.htmlhttp://lists.open-zfs.org/pipermail/developer/2014-February/000523.html
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3029
The zil_itx_create() function uses the vmem_alloc() allocator for
its buffers because when logging a write that buffer may be as large
as 64K. This is non-optimal because we may need to allocate many of
of these buffers and this interface has the potential to be slow.
Instead, use zio_data_buf_alloc() which is specifically designed to
be able to efficiently allocate a wide range of buffer sizes.
In addition, do some cleanup and use the zil_itx_destroy() function
to always free an itx structure. This way we're always sure the
right allocation functions are used. Notice that in the current
code kmem_free() and vmem_free() were both used. This happened to
work because these wrappers map to the same internal SPL function.
This was identified as a potential problem when a low-end memory
constrained system began logging the following warnings. There
was no deadlock here just repeated allocation failures resulting
in increased latency.
Possible memory allocation deadlock: size=65792 lflags=0x42d0
Pid: 20118, comm: kvm Tainted: P O 3.2.0-0.bpo.4-amd64
Call Trace:
[<ffffffffa040b834>] ? spl_kmem_alloc_impl+0x115/0x127 [spl]
[<ffffffffa040b84f>] ? spl_kmem_alloc_debug+0x9/0x36 [spl]
[<ffffffffa05d8a0b>] ? zil_itx_create+0x2d/0x59 [zfs]
[<ffffffffa05c71e6>] ? zfs_log_write+0x13a/0x2f0 [zfs]
[<ffffffffa05d41bc>] ? zfs_write+0x85b/0x9bb [zfs]
[<ffffffffa05e37ec>] ? zpl_aio_write+0xca/0x110 [zfs]
[<ffffffff811088e5>] ? do_sync_readv_writev+0xa3/0xde
[<ffffffff81108f41>] ? do_readv_writev+0xaf/0x125
[<ffffffff81109055>] ? sys_pwritev+0x55/0x9a
[<ffffffff813721d2>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3059
When _zed_event_add_var() was updated to be the common routine
for adding zedlet environment variables, an additional snprintf()
was added to the processing of each nvpair. This commit changes
_zed_event_add_nvpair() to directly call _zed_event_add_var()
for nvpair non-array types, thereby removing a superfluous call to
snprintf(). For consistency, the helper functions for converting
nvpair array types are similarly adjusted to add variables.
The _zed_event_value_is_hex() and _zed_event_add_var() functions have
been moved up in the file since forward declarations are not used,
but no changes have been made to these functions.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3042
The zed_strings container stores strings in an AVL, but does not
check for duplicate strings being added. Within the AVL, strings
are indexed by the string value itself. avl_add() requires the node
being added must not already exist in the tree, and will assert()
if this is not the case.
This should not cause problems in practice. ZED uses this container
in two places. In zed_conf.c, it is used to store the names of
enabled zedlets as zed scans the zedlet directory listing; duplicate
entries cannot occur here since duplicate names cannot occur within
a directory. In zed_event.c, it is used to store the environment
variables (as "NAME=VALUE" strings) that will be passed to zedlets;
duplicate strings here should never happen unless there is a bug
resulting in a duplicate nvpair or environment variable.
This commit protects against adding a duplicate to a zed_strings
container by first checking for the string being added, and removing
the previous entry should one exist. This implements a "last one
wins" policy.
This commit also changes the prototype for zed_strings_add() to allow
the string key (by which it is indexed in the AVL) to differ from
the string value. By adding zedlet environment variables using the
variable name as the key, multiple adds for the same variable name
will result in only the last value being stored.
Finally, this commit routes all additions of zedlet environment
variables through the updated _zed_event_add_var(). This ensures
all zedlet environment variable names are properly converted.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3042
Thank to commit a4430fce69 we're
now correctly returning EROFS when opening a zvol on a read-only
pool. Unfortunately, it looks like this causes us to trigger
some unexpected behavior by __blkdev_get().
In the failure case it's possible __blkdev_get() will call
__blkdev_put() for a bdev which was never successfully opened.
This results in us trying to close the device again and hitting
the NULL dereference.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1343
Rather than ASSERT when for some reason the readonly property of
a zvol can't be read cleanly handle the failure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1343
This was caught by Clang. Clearly the intent of this code was
to explicitly ignore the return value.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3054
When importing pools with zpool import -aN there is inconsistent
behavior between '-d /dev/disk/by-id' (or another path) and
'-c /etc/zfs/zpool.cache'.
The difference in behavior is caused by zpool_find_import_cached()
returning an empty nvlist_t when there are no pools to import but
zpool_find_import_impl() returns NULL for the same situation. The
behavior of zpool_find_import_cached() is arguably more correct
because it allows returning NULL to be used for an error case and
not an empty set.
This change resolves the issue by updating get_configs() such that
it returns an empty set instead of NULL when no config is found.
The updated behavior will now always return 0 for this case.
$ zpool import -aN; echo $?
no pools available to import
0
$ zpool import -aN -d /var/tmp/; echo $?
no pools available to import
0
$ zpool import -aN -c /etc/zfs/zpool.cache; echo $?
no pools available to import
0
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2080
Add a port of arc_summary.py to ZFS on Linux, arc_summary.py is a
standard tool in FreeBSD and Illumos. The version of the script used
for the port originally came from FreeNAS.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#2920
The original script displayed tunable parameters using sysctl calls.
This patch modifies this by displaying tunable parameters found in
/sys/modules/zfs/parameters/. modinfo calls are used to capture
descriptions.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Ensure this script conforms to the projects style guidelines
by limiting line length to 80 columns.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Add a basic help option and usage description which is consistent
with arcstat.py and dbufstat.py. This also adds support for long
opts.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
The -p option is used to specify a specific page of output to be
displayed. If omitted, all output pages would be displayed.
arc_summary, as it stood, had really kludgy processing code for
processing the -p option. It relied on a try-except block which was
treated as an if statement and in normal operation would fail any time a
user didn't specify the -p option on the command line. When the
exception was thrown, the script would then display all output pages.
This happened whether the -p option was omitted or malformed. Thus, in
the principle use case, an exception would be raised in order to run the
script as desired. The same except code would be called regardless of
the exception, however, and malformed -p arguments would also cause the
script to execute.
Additionally, this required the function which handles the case where
all output pages were to be displayed, _call_all, to be potentially
called from several locations within main.
This commit refactors the option processing code to simplify it and make
it easier to catch runtime errors in the script. This is done by
specializing the try-except block to only have an exception when the -p
argument is malformed. When the -p option is correctly selected by the
user, it calls a function in the unSub array directly, which will only
display one page of output.
Finally in the context of this refactoring the page breaks have been
removed. Pages seem to have been added into the output in the FreeNAS
version of the script. This patch removes pages from the output to more
closely resemble the freebsd version of the script.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
1) Comment out stat sections whose kstats are not currently available
2) Port most of arc_summary to use spl kstats
3) Enable l2arc stats
5) Include compressed l2size
4) Minor style fixes / cleanup
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cburroughs <chris.burroughs@gmail.com>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
The arc_summary script is a useful utility for administrators on
other ZFS platforms. It provides a quick and easy way to get a high
level view of the current ARC state.
Historically this was a perl script but it was rewritten in python
for FreeNAS. We've decided to adopt the python version instead of
the perl version for a few reasons.
1) ZoL has no existing perl dependencies, but it does have a python
dependency for scripts such as arcstat.py and dbufstat.py. Using
python for arc_summary.py helps us minimize dependencies.
2) Most major Linux distributions already depend heavily on python
for their core infrastructure. This means it's very likely to
be available even very early in the boot process.
Original source:
https://github.com/freenas/freenas/blob/master/gui/tools/arc_summary.py
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cburroughs <chris.burroughs@gmail.com>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
The sa_modify_attrs() function can add, remove or replace an SA.
The main loop in the function uses the index "i" to iterate over the
existing SAs and uses the index "j" for writing them into a new buffer
via SA_ADD_BULK_ATTR(). The write index, "j" is incremented on remove
(SA_REMOVE) operations which leads to a corruption in the new SA buffer.
This patch remove the increment for SA_REMOVE operations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3028
An attempt to debug zfsonlinux/zfs#2781 revealed that this code could be
simplified by using kmem_asprintf(). It is not clear that switching to
kmem_asprintf() addresses zfsonlinux/zfs#2781. However, switching to
kmem_asprintf() is cleanup that simplifies debugging such that it would
become clear that this is a bug in glibc should the issue persist.
It also brings this function almost back in sync with Illumos. This
was possible due to the recently reworked kmem code which allows us
to use KM_SLEEP in the same fashion as Illumos.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2791
Issue #2781
The split count/scan shrinker callbacks introduced in 3.12 broke the
test for HAVE_SHRINK, effectively disabling the per-superblock shrinkers.
This patch re-enables the per-superblock shrinkers when the split shrinker
callbacks have been detected.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2975
The core motivation behind these changes is to minimize the
memory management differences between ZFS on Linux and other
platforms. This simplifies the process of porting changes to
Linux from other platforms. This is good for code quality
and is expected to reduce the number of defects accidentally
introduced due to porting. The following key Linux specific
changes have been reverted.
* KM_PUSHPAGE changed back to KM_SLEEP. All contexts where
it is unsafe to perform IO have been marked with PF_FSTRANS.
This context specific mechanism is now used exclusively
and the KM_PUSHPAGE mechanism has been retired.
* The KM_NODEBUG flag has been retired. Allocations larger
than 32K should use vmem_alloc()/vmem_free(). Depending
on the size of the allocation either kmalloc() or vmalloc()
will be used internally, but no warning will be printed.
* Pre-allocated vdev IO buffers and the dedicated SA spill
block cache have been retired. It is now safe and reliable
to allocate buffers of the needed size without fear of
deadlocking. This reduces our memory footprint and paves
the way for larger block sizes.
Depends on zfsonlinux/spl#414.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#2918
The SA spill_cache was originally introduced to avoid the need to
perform large kmem or vmem allocations. Instead a small dedicated
cache of preallocated SA buffers was kept.
This solution was viable while the maximum block size was limited
to 128K. But with the planned increase of the maximum block size
to 16M callers need to migrate to the zio_buf_alloc(). However,
they should be aware this interface is expected to change again
once the zio buffers are fully backed by scatter-gather lists.
Alternately, if the callers know these buffers will never be large
or be infrequently accessed they may kmem_alloc() or vmem_alloc()
the needed temporary space.
This change has the additional benegit of bringing the code back
inline with the upstream Illumos source.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Commit 86dd0fd added preallocated I/O buffers. This is no longer
required after the recent kmem changes designed to make our memory
allocation interfaces behave more like those found on Illumos. A
deadlock in this situation is no longer possible.
However, these allocations still have the potential to be expensive.
So a potential future optimization might be to perform then KM_NOSLEEP
so that they either succeed of fail quicky. Either case is acceptable
here because we can safely abort the aggregation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
