Linux 3.15 commit torvalds/linux@293bc98 introduced two new methods.
The ->read_iter() and ->write_iter() methods were designed to replace
the ->aio_read() and ->aio_write() interfaces. Both interfaces were
preserved for several kernel releases in order to migrate all existing
consumers to the new interfaces. But as of Linux 4.1 the legacy
interface has been retired and the ZFS code must be updated to use
the new interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3352
Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl
calls as well as the l2arc and adapt ARC threads.
This obviates the need for MUTEX_FSTRANS so its previous uses and
definition have been eliminated.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3225
As described in flags section of open(2):
O_APPEND:
The file is opened in append mode. Before each write(2), the
file offset is positioned at the end of the file, as if with
lseek(2). O_APPEND may lead to corrupted files on NFS filesys-
tems if more than one process appends data to a file at once.
This is because NFS does not support appending to a file, so the
client kernel has to simulate it, which can't be done without a
race condition.
This issue was originally overlooked because normally the generic
VFS code handles this for a filesystem. However, because ZFS explictly
registers a zpl_write() function it's responsible for the seek.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3124
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3084
Callers of kmem_alloc() which passed the KM_NODEBUG flag to suppress
the large allocation warning have been replaced by vmem_alloc() as
appropriate. The updated vmem_alloc() call will not print a warning
regardless of the size of the allocation.
A careful reader will notice that not all callers have been changed
to vmem_alloc(). Some have only had the KM_NODEBUG flag removed.
This was possible because the default warning threshold has been
increased to 32k. This is desirable because it minimizes the need
for Linux specific code changes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In order to avoid deadlocking in the IO pipeline it is critical that
pageout be avoided during direct memory reclaim. This ensures that
the pipeline threads can always make forward progress and never end
up blocking on a DMU transaction. For this very reason Linux now
provides the PF_FSTRANS flag which may be set in the process context.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The new zpl_aio_write() and zpl_aio_read() functions use kmem_alloc()
to allocate enough memory to hold the vectorized IO. While this
allocation will be small it's been observed in practice to sometimes
slightly exceed the 8K warning threshold by a few kilobytes.
Therefore, the KM_NODEBUG flag has been added to suppress warning.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#2774
Add support for the FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE mode of
fallocate(2). Mimic the behavior of other native file systems such as
ext4 in cases where the file might be extended. If the offset is beyond
the end of the file, return success without changing the file. If the
extent of the punched hole would extend the file, only the existing tail
of the file is punched.
Add the zfs_zero_partial_page() function, modeled after update_page(),
to handle zeroing partial pages in a hole-punching operation. It must
be used under a range lock for the requested region in order that the
ARC and page cache stay in sync.
Move the existing page cache truncation via truncate_setsize() into
zfs_freesp() for better source structure compatibility with upstream code.
Add page cache truncation to zfs_freesp() and zfs_free_range() to handle
hole punching.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#2619
nfsd uses do_readv_writev() to implement fops->read and fops->write.
do_readv_writev() will attempt to read/write using fops->aio_read and
fops->aio_write, but it will fallback to fops->read and fops->write when
AIO is not available. However, the fallback will perform a call for each
individual data page. Since our default recordsize is 128KB, sequential
operations on NFS will generate 32 DMU transactions where only 1
transaction was needed. That was unnecessary overhead and we implement
fops->aio_read and fops->aio_write to eliminate it.
ZFS originated in OpenSolaris, where the AIO API is entirely implemented
in userland's libc by intelligently mapping them to VOP_WRITE, VOP_READ
and VOP_FSYNC. Linux implements AIO inside the kernel itself. Linux
filesystems therefore must implement their own AIO logic and nearly all
of them implement fops->aio_write synchronously. Consequently, they do
not implement aio_fsync(). However, since the ZPL works by mapping
Linux's VFS calls to the functions implementing Illumos' VFS operations,
we instead implement AIO in the kernel by mapping the operations to the
VOP_READ, VOP_WRITE and VOP_FSYNC equivalents. We therefore implement
fops->aio_fsync.
One might be inclined to make our fops->aio_write implementation
synchronous to make software that expects this behavior safe. However,
there are several reasons not to do this:
1. Other platforms do not implement aio_write() synchronously and since
the majority of userland software using AIO should be cross platform,
expectations of synchronous behavior should not be a problem.
2. We would hurt the performance of programs that use POSIX interfaces
properly while simultaneously encouraging the creation of more
non-compliant software.
3. The broader community concluded that userland software should be
patched to properly use POSIX interfaces instead of implementing hacks
in filesystems to cater to broken software. This concept is best
described as the O_PONIES debate.
4. Making an asynchronous write synchronous is non sequitur.
Any software dependent on synchronous aio_write behavior will suffer
data loss on ZFSOnLinux in a kernel panic / system failure of at most
zfs_txg_timeout seconds, which by default is 5 seconds. This seems like
a reasonable consequence of using non-compliant software.
It should be noted that this is also a problem in the kernel itself
where nfsd does not pass O_SYNC on files opened with it and instead
relies on a open()/write()/close() to enforce synchronous behavior when
the flush is only guarenteed on last close.
Exporting any filesystem that does not implement AIO via NFS risks data
loss in the event of a kernel panic / system failure when something else
is also accessing the file. Exporting any file system that implements
AIO the way this patch does bears similar risk. However, it seems
reasonable to forgo crippling our AIO implementation in favor of
developing patches to fix this problem in Linux's nfsd for the reasons
stated earlier. In the interim, the risk will remain. Failing to
implement AIO will not change the problem that nfsd created, so there is
no reason for nfsd's mistake to block our implementation of AIO.
It also should be noted that `aio_cancel()` will always return
`AIO_NOTCANCELED` under this implementation. It is possible to implement
aio_cancel by deferring work to taskqs and use `kiocb_set_cancel_fn()`
to set a callback function for cancelling work sent to taskqs, but the
simpler approach is allowed by the specification:
```
Which operations are cancelable is implementation-defined.
```
http://pubs.opengroup.org/onlinepubs/009695399/functions/aio_cancel.html
The only programs on my system that are capable of using `aio_cancel()`
are QEMU, beecrypt and fio use it according to a recursive grep of my
system's `/usr/src/debug`. That suggests that `aio_cancel()` users are
rare. Implementing aio_cancel() is left to a future date when it is
clear that there are consumers that benefit from its implementation to
justify the work.
Lastly, it is important to know that handling of the iovec updates differs
between Illumos and Linux in the implementation of read/write. On Linux,
it is the VFS' responsibility whle on Illumos, it is the filesystem's
responsibility. We take the intermediate solution of copying the iovec
so that the ZFS code can update it like on Solaris while leaving the
originals alone. This imposes some overhead. We could always revisit
this should profiling show that the allocations are a problem.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#223Closes#2373
Update the current code to ensure inodes are never dirtied if they are
part of a read-only file system or snapshot. If they do somehow get
dirtied an attempt will make made to write them to disk. In the case
of snapshots, which don't have a ZIL, this will result in a NULL
dereference in zil_commit().
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2405
We add support for lsattr and chattr to resolve a regression caused
by 88c283952f that broke Python's
xattr.list(). That changet broke Gentoo Portage's FEATURES=xattr,
which depended on Python's xattr.list().
Only attributes common to both Solaris and Linux are supported. These
are 'a', 'd' and 'i' in Linux's lsattr and chattr commands. File
attributes exclusive to Solaris are present in the ZFS code, but cannot
be accessed or modified through this method. That was the case prior to
this patch. The resolution of issue zfsonlinux/zfs#229 should implement
some method to permit access and modification of Solaris-specific
attributes.
References:
https://bugs.gentoo.org/show_bug.cgi?id=483516
Original-patch-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1691
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written. Others were
caused when the common code was slightly adjusted for Linux.
This patch contains no functional changes. It only refreshes
the code to conform to style guide.
Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request. The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1821
The comment in zfs_close states that "Under Linux the zfs_close() hook
is not symmetric with zfs_open()". This is not true. zfs_open/zfs_close
is associated with every successful struct file creation/deletion, which
should always be balanced.
Here is an example of what's wrong:
Process A B
open(O_SYNC)
z_sync_cnt = 1
open(O_SYNC)
z_sync_cnt = 2
close()
z_sync_cnt = 0
So z_sync_cnt is 0 even if B still has the file with O_SYNC.
Also moves the generic_file_open call before zfs_open to ensure that in
the case generic_file_open fails z_sync_cnt is not incremented. This
is safe because generic_file_open has no side effects.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1962
Currently, using msync() results in the following code path:
sys_msync -> zpl_fsync -> filemap_write_and_wait_range -> zpl_writepages -> write_cache_pages -> zpl_putpage
In such a code path, zil_commit() is called as part of zpl_putpage().
This means that for each page, the write is handed to the DMU, the ZIL
is committed, and only then do we move on to the next page. As one might
imagine, this results in atrocious performance where there is a large
number of pages to write: instead of committing a batch of N writes,
we do N commits containing one page each. In some extreme cases this
can result in msync() being ~700 times slower than it should be, as well
as very inefficient use of ZIL resources.
This patch fixes this issue by making sure that the requested writes
are batched and then committed only once. Unfortunately, the
implementation is somewhat non-trivial because there is no way to run
write_cache_pages in SYNC mode (so that we get all pages) without
making it wait on the writeback tag for each page.
The solution implemented here is composed of two parts:
- I added a new callback system to the ZIL, which allows the caller to
be notified when its ITX gets written to stable storage. One nice
thing is that the callback is called not only in zil_commit() but
in zil_sync() as well, which means that the caller doesn't have to
care whether the write ended up in the ZIL or the DMU: it will get
notified as soon as it's safe, period. This is an improvement over
dmu_tx_callback_register() that was used previously, which only
supports DMU writes. The rationale for this change is to allow
zpl_putpage() to be notified when a ZIL commit is completed without
having to block on zil_commit() itself.
- zpl_writepages() now calls write_cache_pages in non-SYNC mode, which
will prevent (1) write_cache_pages from blocking, and (2) zpl_putpage
from issuing ZIL commits. zpl_writepages() will issue the commit
itself instead of relying on zpl_putpage() to do it, thus nicely
batching the writes. Note, however, that we still have to call
write_cache_pages() again in SYNC mode because there is an edge case
documented in the implementation of write_cache_pages() whereas it
will not give us all dirty pages when running in non-SYNC mode. Thus
we need to run it at least once in SYNC mode to make sure we honor
persistency guarantees. This only happens when the pages are
modified at the same time msync() is running, which should be rare.
In most cases there won't be any additional pages and this second
call will do nothing.
Note that this change also fixes a bug related to #907 whereas calling
msync() on pages that were already handed over to the DMU in a previous
writepages() call would make msync() block until the next TXG sync
instead of returning as soon as the ZIL commit is complete. The new
callback system fixes that problem.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1849Closes#907
Because ZFS bypasses the page cache we don't inherit per-task I/O
accounting for free. However, the Linux kernel does provide helper
functions allow us to perform our own accounting. These are most
commonly used for direct IO which also bypasses the page cache, but
they can be used for the common read/write call paths as well.
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#313Closes#1275
Commit torvalds/linux@2233f31aad
replaced ->readdir() with ->iterate() in struct file_operations.
All filesystems must now use the new ->iterate method.
To handle this the code was reworked to use the new ->iterate
interface. Care was taken to keep the majority of changes
confined to the ZPL layer which is already Linux specific.
However, minor changes were required to the common zfs_readdir()
function.
Compatibility with older kernels was accomplished by adding
versions of the trivial dir_emit* helper functions. Also the
various *_readdir() functions were reworked in to wrappers
which create a dir_context structure to pass to the new
*_iterate() functions.
Unfortunately, the new dir_emit* functions prevent us from
passing a private pointer to the filldir function. The xattr
directory code leveraged this ability through zfs_readdir()
to generate the list of xattr names. Since we can no longer
use zfs_readdir() a simplified zpl_xattr_readdir() function
was added to perform the same task.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1653
Issue #1591
When the property atime=on is set operations which only access
and inode do cause an atime update. However, it turns out that
dirty inodes with updated atimes are only written to disk when
the inodes get evicted from the cache. Somewhat surprisingly
the source suggests that this isn't a ZoL specific issue.
This behavior may in part explain why zfs's reclaim logic has
been observed to be slow. When reclaiming inodes its likely
that they have a dirty atime which will force a write to disk.
Obviously we don't want to force a write to disk for every
atime update, these needs to be batched. The right way to
do this is to fully implement the .dirty_inode and .write_inode
callbacks. However, to do that right requires proper unification
of some fields in the znode/inode. Then we could just mark the
inode dirty and leave it to the VFS to call .write_inode
periodically.
Until that work gets done we have to settle for some middle
ground. The simplest and safest thing we can do for now is
to write the dirty inode on last close. This should prevent
the majority of inodes in the cache from having dirty atimes
and not drastically increase the number of writes.
Some rudimentally testing to show how long it takes to drop
500,000 inodes from the cache shows promising results. This
is as expected because we're no longer do lots of IO as part
of the eviction, it was done earlier during the close.
w/out patch: ~30s to drop 500,000 inodes with drop_caches.
with patch: ~3s to drop 500,000 inodes with drop_caches.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The approach taken was the rework zfs_holey() as little as
possible and then just wrap the code as needed to ensure
correct locking and error handling.
Tested with xfstests 285 and 286. All tests pass except for
7-9 of 285 which try to reserve blocks first via fallocate(2)
and fail because fallocate(2) is not yet supported.
Note that the filp->f_lock spinlock did not exist prior to
Linux 2.6.30, but we avoid the need for autotools check by
virtue of the fact that SEEK_DATA/SEEK_HOLE support was not
added until Linux 3.1.
An autoconf check was added for lseek_execute() which is
currently a private function but the expectation is that it
will be exported perhaps as early as Linux 3.11.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1384
Until these hooks are fully implemented return the expected
-EOPNOTSUPP error to indicate they are not functional. This
allows test suites such as xfstests to cleanly skip testing
this functionality until it's implemented.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #229
The zpl_readdir() function shouldn't be registered as part of
the zpl_file_operations table, it must only be part of the
zpl_dir_file_operations table. By removing this callback
the VFS will now correctly return ENOTDIR when calling
getdents() on a file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1404
The txg_sync(), zfs_putpage(), zvol_write(), and zvol_discard()
call paths must only use KM_PUSHPAGE to avoid potential deadlocks
during direct reclaim.
This patch annotates these call paths so any accidental use of
KM_SLEEP will be quickly detected. In the interest of stability
if debugging is disabled the offending allocation will have its
GFP flags automatically corrected. When debugging is enabled
any misuse will be treated as a fatal error.
This patch is entirely for debugging. We should be careful to
NOT become dependant on it fixing up the incorrect allocations.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The commit, cfc9a5c88f, to fix deadlocks
in zpl_writepage() relied on PF_MEMALLOC. That had the effect of
disabling the direct reclaim path on all allocations originating from
calls to this function, but it failed to address the actual cause of
those deadlocks. This led to the same deadlocks being observed with
swap on zvols, but not with swap on the loop device, which exercises
this code.
The use of PF_MEMALLOC also had the side effect of permitting
allocations to be made from ZONE_DMA in instances that did not require
it. This contributes to the possibility of panics caused by depletion
of pages from ZONE_DMA.
As such, we revert this patch in favor of a proper fix for both issues.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #726
Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is
supported, since it's the only one that matches the behavior of
zfs_space(). This makes it pretty much useless in its current
form, but it's a start.
To support other flag combinations we would need to modify
zfs_space() to make it more flexible, or emulate the desired
functionality in zpl_fallocate().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #334
The Linux 3.1 kernel updated the fops->fsync() callback yet again.
They now pass the requested range and delegate the responsibility
for calling filemap_write_and_wait_range() to the callback. In
addition imutex is no longer held by the caller and the callback
is responsible for taking the lock if required.
This commit updates the code to provide a zpl_fsync() function
for the updated API. Implementations for the previous two APIs
are also maintained for compatibility.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#445
Be careful not to unconditionally clear the PF_MEMALLOC bit in
the task structure. It may have already been set when entering
zpl_putpage() in which case it must remain set on exit. In
particular the kswapd thread will have PF_MEMALLOC set in
order to prevent it from entering direct reclaim. By clearing
it we allow the following NULL deref to potentially occur.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8109c7ab>] balance_pgdat+0x25b/0x4ff
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #287
This warning was accidentally introduced by commit
f3ab88d646 which updated the
.readpages() implementation. The fix is to simply cast
the helper function to the appropriate type when passed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Unlike the .readpage() callback which is passed a single locked page
to be populated. The .readpages() callback is passed a list of unlocked
pages which are all marked for read-ahead (PG_readahead set). It is
the responsibly of .readpages() to ensure to pages are properly locked
before being populated.
Prior to this change the requested read-ahead pages would be updated
outside of the page lock which is unsafe. The unlocked pages would then
be unlocked again which is harmless but should have been immediately
detected as bug. Unfortunately, newer kernels failed detect this issue
because the check is done with a VM_BUG_ON which is disabled by default.
Luckily, the old Debian Lenny 2.6.26 kernel caught this because it
simply uses a BUG_ON.
The straight forward fix for this is to update the .readpages() callback
to use the read_cache_pages() helper function. The helper function will
ensure that each page in the list is properly locked before it is passed
to the .readpage() callback. In addition resolving the bug, this results
in a nice simplification of the existing code.
The downside to this change is that instead of passing one large read
request to the dmu multiple smaller ones are submitted. All of these
requests however are marked for readahead so the lower layers should
issue a large I/O regardless. Thus most of the request should hit the
ARC cache.
Futher optimization of this code can be done in the future is a perform
analysis determines it to be worthwhile. But for the moment, it is
preferable that code be correct and understandable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#355
While the existing implementation of .writepage()/zpl_putpage() was
functional it was not entirely correct. In particular, it would move
dirty pages in to a clean state simply after copying them in to the
ARC cache. This would result in the pages being lost if the system
were to crash enough though the Linux VFS believed them to be safe on
stable storage.
Since at the moment virtually all I/O, except mmap(2), bypasses the
page cache this isn't as bad as it sounds. However, as hopefully
start using the page cache more getting this right becomes more
important so it's good to improve this now.
This patch takes a big step in that direction by updating the code
to correctly move dirty pages through a writeback phase before they
are marked clean. When a dirty page is copied in to the ARC it will
now be set in writeback and a completion callback is registered with
the transaction. The page will stay in writeback until the dmu runs
the completion callback indicating the page is on stable storage.
At this point the page can be safely marked clean.
This process is normally entirely asynchronous and will be repeated
for every dirty page. This may initially sound inefficient but most
of these pages will end up in a few txgs. That means when they are
eventually written to disk they should be nicely batched. However,
there is room for improvement. It may still be desirable to batch
up the pages in to larger writes for the dmu. This would reduce
the number of callbacks and small 4k buffer required by the ARC.
Finally, if the caller requires that the I/O be done synchronously
by setting WB_SYNC_ALL or if ZFS_SYNC_ALWAYS is set. Then the I/O
will trigger a zil_commit() to flush the data to stable storage.
At which point the registered callbacks will be run leaving the
date safe of disk and marked clean before returning from .writepage.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Disable the normal reclaim path for zpl_putpage(). This ensures that
all memory allocations under this call path will never enter direct
reclaim. If this were to happen the VM might try to write out
additional pages by calling zpl_putpage() again resulting in a
deadlock.
This sitution is typically handled in Linux by marking each offending
allocation GFP_NOFS. However, since much of the code used is common
it makes more sense to use PF_MEMALLOC to flag the entire call tree.
Alternately, the code could be updated to pass the needed allocation
flags but that's a more invasive change.
The following example of the above described deadlock was triggered
by test 074 in the xfstest suite.
Call Trace:
[<ffffffff814dcdb2>] down_write+0x32/0x40
[<ffffffffa05af6e4>] dnode_new_blkid+0x94/0x2d0 [zfs]
[<ffffffffa0597d66>] dbuf_dirty+0x556/0x750 [zfs]
[<ffffffffa05987d1>] dmu_buf_will_dirty+0x81/0xd0 [zfs]
[<ffffffffa059ee70>] dmu_write+0x90/0x170 [zfs]
[<ffffffffa0611afe>] zfs_putpage+0x2ce/0x360 [zfs]
[<ffffffffa062875e>] zpl_putpage+0x1e/0x60 [zfs]
[<ffffffffa06287b2>] zpl_writepage+0x12/0x20 [zfs]
[<ffffffff8115f907>] writeout+0xa7/0xd0
[<ffffffff8115fa6b>] move_to_new_page+0x13b/0x170
[<ffffffff8115fed4>] migrate_pages+0x434/0x4c0
[<ffffffff811559ab>] compact_zone+0x4fb/0x780
[<ffffffff81155ed1>] compact_zone_order+0xa1/0xe0
[<ffffffff8115602c>] try_to_compact_pages+0x11c/0x190
[<ffffffff811200bb>] __alloc_pages_nodemask+0x5eb/0x8b0
[<ffffffff8115464a>] alloc_pages_current+0xaa/0x110
[<ffffffff8111e36e>] __get_free_pages+0xe/0x50
[<ffffffffa03f0e2f>] kv_alloc+0x3f/0xb0 [spl]
[<ffffffffa03f11d9>] spl_kmem_cache_alloc+0x339/0x660 [spl]
[<ffffffffa05950b3>] dbuf_create+0x43/0x370 [zfs]
[<ffffffffa0596fb1>] __dbuf_hold_impl+0x241/0x480 [zfs]
[<ffffffffa0597276>] dbuf_hold_impl+0x86/0xc0 [zfs]
[<ffffffffa05977ff>] dbuf_hold_level+0x1f/0x30 [zfs]
[<ffffffffa05a9dde>] dmu_tx_check_ioerr+0x4e/0x110 [zfs]
[<ffffffffa05aa1f9>] dmu_tx_count_write+0x359/0x6f0 [zfs]
[<ffffffffa05aa5df>] dmu_tx_hold_write+0x4f/0x70 [zfs]
[<ffffffffa0611a6d>] zfs_putpage+0x23d/0x360 [zfs]
[<ffffffffa062875e>] zpl_putpage+0x1e/0x60 [zfs]
[<ffffffff811221f9>] write_cache_pages+0x1c9/0x4a0
[<ffffffffa0628738>] zpl_writepages+0x18/0x20 [zfs]
[<ffffffff81122521>] do_writepages+0x21/0x40
[<ffffffff8119bbbd>] writeback_single_inode+0xdd/0x2c0
[<ffffffff8119bfbe>] writeback_sb_inodes+0xce/0x180
[<ffffffff8119c11b>] writeback_inodes_wb+0xab/0x1b0
[<ffffffff8119c4bb>] wb_writeback+0x29b/0x3f0
[<ffffffff8119c6cb>] wb_do_writeback+0xbb/0x240
[<ffffffff811308ea>] bdi_forker_task+0x6a/0x310
[<ffffffff8108ddf6>] kthread+0x96/0xa0
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#327
Under Linux the VFS handles virtually all of the mmap() access
checks. Filesystem specific checks are left to be handled in
the .mmap() hook and normally there arn't any.
However, ZFS provides a few attributes which can influence the
mmap behavior and should be honored. Note, currently the code
to modify these attributes has not been implemented under Linux.
* ZFS_IMMUTABLE | ZFS_READONLY | ZFS_APPENDONLY: when any of these
attributes are set a file may not be mmaped with write access.
* ZFS_AV_QUARANTINED: when set a file file may not be mmaped with
read or exec access.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Enable zfs_getpage, zfs_fillpage, zfs_putpage, zfs_putapage functions.
The functions have been modified to make them Linux friendly.
ZFS uses these functions to read/write the mmapped pages. Using them
from readpage/writepage results in clear code. The patch also adds
readpages and writepages interface functions to read/write list of
pages in one function call.
The code change handles the first mmap optimization mentioned on
https://github.com/behlendorf/zfs/issues/225
Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com>
Signed-off-by: Brian Behlendorf <behlendorf@llnl.gov>
Issue #255
How nfsd handles .fsync() has been changed a couple of times in the
recent kernels. But basically there are three cases we need to
consider.
Linux 2.6.12 - 2.6.33
* The .fsync() hook takes 3 arguments
* The nfsd will call .fsync() with a NULL file struct pointer.
Linux 2.6.34
* The .fsync() hook takes 3 arguments
* The nfsd no longer calls .fsync() but instead used sync_inode()
Linux 2.6.35 - 2.6.x
* The .fsync() hook takes 2 arguments
* The nfsd no longer calls .fsync() but instead used sync_inode()
For once it looks like we've gotten lucky. The first two cases can
actually be collased in to one if we stop using the file struct
pointer entirely. Since the dentry is still passed in both cases
this is possible. The last case can then be safely handled by
unconditionally using the dentry in the file struct pointer now
that we know the nfsd caller has been removed.
Closes#230
As of Linux 2.6.29 a clean credential API was added to the Linux kernel.
Previously the credential was embedded in the task_struct. Because the
SPL already has considerable support for handling this API change the
ZPL code has been updated to use the Solaris credential API.
In the original implementation the zfs_open()/zfs_close() hooks
were dropped for simplicity. This was functional but not 100%
correct with the expected ZFS sematics. Updating and re-adding the
zfs_open()/zfs_close() hooks resolves the following issues.
1) The ZFS_APPENDONLY file attribute is once again honored. While
there are still no Linux tools to set/clear these attributes once
there are it should behave correctly.
2) Minimal virus scan file attribute hooks were added. Once again
this support in disabled but the infrastructure is back in place.
3) Most importantly correctly handle assigning files which were
opened syncronously to the intent log. Without this change O_SYNC
modifications could be lost during a system crash even though they
were marked synchronous.
The fsync() callback in the file_operations structure used to take
3 arguments. The callback now only takes 2 arguments because the
dentry argument was determined to be unused by all consumers. To
handle this a compatibility prototype was added to ensure the right
prototype is used. Our implementation never used the dentry argument
either so it's just a matter of using the right prototype.
It's worth taking a moment to describe how mmap is implemented
for zfs because it differs considerably from other Linux filesystems.
However, this issue is handled the same way under OpenSolaris.
The issue is that by design zfs bypasses the Linux page cache and
leaves all caching up to the ARC. This has been shown to work
well for the common read(2)/write(2) case. However, mmap(2)
is problem because it relies on being tightly integrated with the
page cache. To handle this we cache mmap'ed files twice, once in
the ARC and a second time in the page cache. The code is careful
to keep both copies synchronized.
When a file with an mmap'ed region is written to using write(2)
both the data in the ARC and existing pages in the page cache
are updated. For a read(2) data will be read first from the page
cache then the ARC if needed. Neither a write(2) or read(2) will
will ever result in new pages being added to the page cache.
New pages are added to the page cache only via .readpage() which
is called when the vfs needs to read a page off disk to back the
virtual memory region. These pages may be modified without
notifying the ARC and will be written out periodically via
.writepage(). This will occur due to either a sync or the usual
page aging behavior. Note because a read(2) of a mmap'ed file
will always check the page cache first even when the ARC is out
of date correct data will still be returned.
While this implementation ensures correct behavior it does have
have some drawbacks. The most obvious of which is that it
increases the required memory footprint when access mmap'ed
files. It also adds additional complexity to the code keeping
both caches synchronized.
Longer term it may be possible to cleanly resolve this wart by
mapping page cache pages directly on to the ARC buffers. The
Linux address space operations are flexible enough to allow
selection of which pages back a particular index. The trick
would be working out the details of which subsystem is in
charge, the ARC, the page cache, or both. It may also prove
helpful to move the ARC buffers to a scatter-gather lists
rather than a vmalloc'ed region.
Additionally, zfs_write/read_common() were used in the readpage
and writepage hooks because it was fairly easy. However, it
would be better to update zfs_fillpage and zfs_putapage to be
Linux friendly and use them instead.
The Linux specific file operations have all been located in the
file zpl_file.c. These functions primarily rely on the reworked
zfs_* functions to do their job. They are also responsible for
converting the possible Solaris style error codes to negative
Linux errors.
This first zpl_* commit also includes a common zpl.h header with
minimal entries to register the Linux specific hooks. In also
adds all the new zpl_* file to the Makefile.in. This is not a
standalone commit, you required the following zpl_* commits.
