c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-27 11:29:36 +03:00
Code Issues Packages Projects Releases Wiki Activity
c94fb10917
mirror_zfs/etc/zfs/Makefile.am

35 lines
795 B
Makefile
Raw Normal View History

Add init scripts To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
2011-03-18 01:02:28 +03:00
pkgsysconfdir = $(sysconfdir)/zfs
pkgsysconf_DATA = \
vdev_id support for device link aliases Add a vdev_id feature to map device names based on already defined udev device links. To increase the odds that vdev_id will run after the rules it depends on, increase the vdev.rules rule number from 60 to 69. With this change, vdev_id now provides functionality analogous to zpool_id and zpool_layout, paving the way to retire those tools. A defined alias takes precedence over a topology-derived name, but the two naming methods can otherwise coexist. For example, one might name drives in a JBOD with the sas_direct topology while naming an internal L2ARC device with an alias. For example, the following lines in vdev_id.conf will result in the creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same target as the device link specified in the third field. # by-vdev # name fully qualified or base name of device link alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca alias d2 wwn-0x5000c5002def789e Also perform some minor vdev_id cleanup, such as removal of the unused -s command line option. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #981
2012-11-29 23:08:37 +04:00
vdev_id.conf.alias.example \
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 04:32:30 +04:00
vdev_id.conf.sas_direct.example \
vdev_id.conf.sas_switch.example \
vdev_id: extension for new scsi topology On systems with SCSI rather than SAS disk topology, this change enables the vdev_id script to match against the block device path, and therefore create a vdev alias in /dev/disk/by-vdev. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Simon Guest <simon.guest@tesujimath.org> Closes #6592
2017-09-27 20:39:47 +03:00
vdev_id.conf.multipath.example \
vdev_id.conf.scsi.example
Fix zfs-functions packaging bug This fixes a bug where the generated zfs-functions was being included along with original zfs-functions.in in the make dist tarball. This caused an unfortunate series of events during build/packaging that resulted in the RPM-installed /etc/zfs/zfs-functions listing the paths as: ZFS="/usr/local/sbin/zfs" ZED="/usr/local/sbin/zed" ZPOOL="/usr/local/sbin/zpool" When they should have been: ZFS="/sbin/zfs" ZED="/sbin/zed" ZPOOL="/sbin/zpool" This affects init.d (non-systemd) distros like CentOS 6. /etc/default/zfs and /etc/zfs/zfs-functions are also used by the initramfs, so they need to be built even when init.d support is not. They have been moved to the (new) etc/default and (existing) etc/zfs source directories, respectively. Fixes: #9443 Co-authored-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com>
2020-02-06 20:28:20 +03:00
pkgsysconf_SCRIPTS = \
zfs-functions
Add init scripts To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
2011-03-18 01:02:28 +03:00
Fix zfs-functions packaging bug This fixes a bug where the generated zfs-functions was being included along with original zfs-functions.in in the make dist tarball. This caused an unfortunate series of events during build/packaging that resulted in the RPM-installed /etc/zfs/zfs-functions listing the paths as: ZFS="/usr/local/sbin/zfs" ZED="/usr/local/sbin/zed" ZPOOL="/usr/local/sbin/zpool" When they should have been: ZFS="/sbin/zfs" ZED="/sbin/zed" ZPOOL="/sbin/zpool" This affects init.d (non-systemd) distros like CentOS 6. /etc/default/zfs and /etc/zfs/zfs-functions are also used by the initramfs, so they need to be built even when init.d support is not. They have been moved to the (new) etc/default and (existing) etc/zfs source directories, respectively. Fixes: #9443 Co-authored-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com>
2020-02-06 20:28:20 +03:00
EXTRA_DIST = $(pkgsysconf_DATA) \
zfs-functions.in
$(pkgsysconf_SCRIPTS):%:%.in Makefile
-(if [ -e /etc/debian_version ]; then \
NFS_SRV=nfs-kernel-server; \
else \
NFS_SRV=nfs; \
fi; \
if [ -e /sbin/openrc-run ]; then \
SHELL=/sbin/openrc-run; \
else \
SHELL=/bin/sh; \
fi; \
$(SED) \
-e 's,@sbindir\@,$(sbindir),g' \
-e 's,@sysconfdir\@,$(sysconfdir),g' \
-e 's,@initconfdir\@,$(initconfdir),g' \
$< >'$@'; \
[ '$@' = 'zfs-functions' ] || \
chmod +x '$@')
CLEANFILES = $(pkgsysconf_SCRIPTS)
Reference in New Issue Copy Permalink