c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2026-01-03 03:46:00 +03:00
Code Issues Packages Projects Releases Wiki Activity
8b1c6db3d2
mirror_zfs/etc/zfs/vdev_id.conf.sas_direct.example

29 lines
616 B
Plaintext
Raw Normal View History

Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 04:32:30 +04:00
multipath no
topology sas_direct
phys_per_port 4
Fix typos in etc/ Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Closes #9236
2019-08-30 19:46:52 +03:00
# Additionally create /dev/by-enclosure/ symlinks for enclosure devices
Add enclosure_symlinks option to vdev_id Add an 'enclosure_symlinks' option to vdev_id.conf. This creates consistently named symlinks to the enclosure devices (/dev/sg*) based off the configuration in vdev_id.conf. The enclosure symlinks show up in /dev/by-enclosure/<prefix>-<channel><num>. The links make it make it easy to run sg_ses on a particular enclosure device. The enclosure links are created in addition to the normal /dev/disk/by-vdev links. 'enclosure_symlinks' is only valid in sas_direct configurations. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Simon Guest <simon.guest@tesujimath.org> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #8194
2018-12-15 04:27:49 +03:00
enclosure_symlinks yes
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 04:32:30 +04:00
# PCI_ID HBA PORT CHANNEL NAME
channel 85:00.0 1 A
channel 85:00.0 0 B
channel 86:00.0 1 C
channel 86:00.0 0 D
vdev_id: support per-channel slot mappings The vdev_id udev helper currently applies slot renumbering rules to every channel (JBOD) in the system. This is too inflexible for systems with non-homogeneous storage topologies. The "slot" keyword now takes an optional third parameter which names a channel to which the mapping will apply. If the third parameter is omitted then the rule applies to all channels. The first-specified rule that can match a slot takes precedence. Therefore a channel-specific rule for a given slot should generally appear before a generic rule for the same slot number. In this way a custom slot mapping can be applied to a particular channel and a default mapping applied to the rest. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2056
2014-01-14 01:32:41 +04:00
# Custom mapping for Channel A
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 04:32:30 +04:00
# Linux Mapped
vdev_id: support per-channel slot mappings The vdev_id udev helper currently applies slot renumbering rules to every channel (JBOD) in the system. This is too inflexible for systems with non-homogeneous storage topologies. The "slot" keyword now takes an optional third parameter which names a channel to which the mapping will apply. If the third parameter is omitted then the rule applies to all channels. The first-specified rule that can match a slot takes precedence. Therefore a channel-specific rule for a given slot should generally appear before a generic rule for the same slot number. In this way a custom slot mapping can be applied to a particular channel and a default mapping applied to the rest. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2056
2014-01-14 01:32:41 +04:00
# Slot Slot Channel
slot 1 7 A
slot 2 10 A
slot 3 3 A
slot 4 6 A
# Default mapping for B, C, and D
slot 1 4
slot 2 2
slot 3 1
slot 4 3
Reference in New Issue Copy Permalink