mirror_zfs/module/zfs/ddt.c

1317 lines
35 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012, 2016 by Delphix. All rights reserved.
* Copyright (c) 2022 by Pawel Jakub Dawidek
* Copyright (c) 2019, 2023, Klara Inc.
*/
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/zio.h>
#include <sys/ddt.h>
#include <sys/ddt_impl.h>
#include <sys/zap.h>
#include <sys/dmu_tx.h>
#include <sys/arc.h>
#include <sys/dsl_pool.h>
#include <sys/zio_checksum.h>
#include <sys/dsl_scan.h>
#include <sys/abd.h>
/*
* # DDT: Deduplication tables
*
* The dedup subsystem provides block-level deduplication. When enabled, blocks
* to be written will have the dedup (D) bit set, which causes them to be
* tracked in a "dedup table", or DDT. If a block has been seen before (exists
* in the DDT), instead of being written, it will instead be made to reference
* the existing on-disk data, and a refcount bumped in the DDT instead.
*
* ## Dedup tables and entries
*
* Conceptually, a DDT is a dictionary or map. Each entry has a "key"
* (ddt_key_t) made up a block's checksum and certian properties, and a "value"
* (one or more ddt_phys_t) containing valid DVAs for the block's data, birth
* time and refcount. Together these are enough to track references to a
* specific block, to build a valid block pointer to reference that block (for
* freeing, scrubbing, etc), and to fill a new block pointer with the missing
* pieces to make it seem like it was written.
*
* There's a single DDT (ddt_t) for each checksum type, held in spa_ddt[].
* Within each DDT, there can be multiple storage "types" (ddt_type_t, on-disk
* object data formats, each with their own implementations) and "classes"
* (ddt_class_t, instance of a storage type object, for entries with a specific
* characteristic). An entry (key) will only ever exist on one of these objects
* at any given time, but may be moved from one to another if their type or
* class changes.
*
* The DDT is driven by the write IO pipeline (zio_ddt_write()). When a block
* is to be written, before DVAs have been allocated, ddt_lookup() is called to
* see if the block has been seen before. If its not found, the write proceeds
* as normal, and after it succeeds, a new entry is created. If it is found, we
* fill the BP with the DVAs from the entry, increment the refcount and cause
* the write IO to return immediately.
*
* Each ddt_phys_t slot in the entry represents a separate dedup block for the
* same content/checksum. The slot is selected based on the zp_copies parameter
* the block is written with, that is, the number of DVAs in the block. The
* "ditto" slot (DDT_PHYS_DITTO) used to be used for now-removed "dedupditto"
* feature. These are no longer written, and will be freed if encountered on
* old pools.
*
* ## Lifetime of an entry
*
* A DDT can be enormous, and typically is not held in memory all at once.
* Instead, the changes to an entry are tracked in memory, and written down to
* disk at the end of each txg.
*
* A "live" in-memory entry (ddt_entry_t) is a node on the live tree
* (ddt_tree). At the start of a txg, ddt_tree is empty. When an entry is
* required for IO, ddt_lookup() is called. If an entry already exists on
* ddt_tree, it is returned. Otherwise, a new one is created, and the
* type/class objects for the DDT are searched for that key. If its found, its
* value is copied into the live entry. If not, an empty entry is created.
*
* The live entry will be modified during the txg, usually by modifying the
* refcount, but sometimes by adding or updating DVAs. At the end of the txg
* (during spa_sync()), type and class are recalculated for entry (see
* ddt_sync_entry()), and the entry is written to the appropriate storage
* object and (if necessary), removed from an old one. ddt_tree is cleared and
* the next txg can start.
*
* ## Dedup quota
*
* A maximum size for all DDTs on the pool can be set with the
* dedup_table_quota property. This is determined in ddt_over_quota() and
* enforced during ddt_lookup(). If the pool is at or over its quota limit,
* ddt_lookup() will only return entries for existing blocks, as updates are
* still possible. New entries will not be created; instead, ddt_lookup() will
* return NULL. In response, the DDT write stage (zio_ddt_write()) will remove
* the D bit on the block and reissue the IO as a regular write. The block will
* not be deduplicated.
*
* Note that this is based on the on-disk size of the dedup store. Reclaiming
* this space after deleting entries relies on the ZAP "shrinking" behaviour,
* without which, no space would be recovered and the DDT would continue to be
* considered "over quota". See zap_shrink_enabled.
*
* ## Repair IO
*
* If a read on a dedup block fails, but there are other copies of the block in
* the other ddt_phys_t slots, reads will be issued for those instead
* (zio_ddt_read_start()). If one of those succeeds, the read is returned to
* the caller, and a copy is stashed on the entry's dde_repair_abd.
*
* During the end-of-txg sync, any entries with a dde_repair_abd get a
* "rewrite" write issued for the original block pointer, with the data read
* from the alternate block. If the block is actually damaged, this will invoke
* the pool's "self-healing" mechanism, and repair the block.
*
* ## Scanning (scrub/resilver)
*
* If dedup is active, the scrub machinery will walk the dedup table first, and
* scrub all blocks with refcnt > 1 first. After that it will move on to the
* regular top-down scrub, and exclude the refcnt > 1 blocks when it sees them.
* In this way, heavily deduplicated blocks are only scrubbed once. See the
* commentary on dsl_scan_ddt() for more details.
*
* Walking the DDT is done via ddt_walk(). The current position is stored in a
* ddt_bookmark_t, which represents a stable position in the storage object.
* This bookmark is stored by the scan machinery, and must reference the same
* position on the object even if the object changes, the pool is exported, or
* OpenZFS is upgraded.
*
* ## Interaction with block cloning
*
* If block cloning and dedup are both enabled on a pool, BRT will look for the
* dedup bit on an incoming block pointer. If set, it will call into the DDT
* (ddt_addref()) to add a reference to the block, instead of adding a
* reference to the BRT. See brt_pending_apply().
*/
/*
* These are the only checksums valid for dedup. They must match the list
* from dedup_table in zfs_prop.c
*/
#define DDT_CHECKSUM_VALID(c) \
(c == ZIO_CHECKSUM_SHA256 || c == ZIO_CHECKSUM_SHA512 || \
c == ZIO_CHECKSUM_SKEIN || c == ZIO_CHECKSUM_EDONR || \
c == ZIO_CHECKSUM_BLAKE3)
static kmem_cache_t *ddt_cache;
static kmem_cache_t *ddt_entry_cache;
/*
* Enable/disable prefetching of dedup-ed blocks which are going to be freed.
*/
int zfs_dedup_prefetch = 0;
/*
* If the dedup class cannot satisfy a DDT allocation, treat as over quota
* for this many TXGs.
*/
uint_t dedup_class_wait_txgs = 5;
static const ddt_ops_t *const ddt_ops[DDT_TYPES] = {
&ddt_zap_ops,
};
static const char *const ddt_class_name[DDT_CLASSES] = {
"ditto",
"duplicate",
"unique",
};
static void
ddt_object_create(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
dmu_tx_t *tx)
{
spa_t *spa = ddt->ddt_spa;
objset_t *os = ddt->ddt_os;
uint64_t *objectp = &ddt->ddt_object[type][class];
OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> Ported by: Tony Hutter <hutter2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
2016-06-16 01:47:05 +03:00
boolean_t prehash = zio_checksum_table[ddt->ddt_checksum].ci_flags &
ZCHECKSUM_FLAG_DEDUP;
char name[DDT_NAMELEN];
ddt_object_name(ddt, type, class, name);
ASSERT3U(*objectp, ==, 0);
VERIFY0(ddt_ops[type]->ddt_op_create(os, objectp, tx, prehash));
ASSERT3U(*objectp, !=, 0);
VERIFY0(zap_add(os, DMU_POOL_DIRECTORY_OBJECT, name,
sizeof (uint64_t), 1, objectp, tx));
VERIFY0(zap_add(os, spa->spa_ddt_stat_object, name,
sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t),
&ddt->ddt_histogram[type][class], tx));
}
static void
ddt_object_destroy(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
dmu_tx_t *tx)
{
spa_t *spa = ddt->ddt_spa;
objset_t *os = ddt->ddt_os;
uint64_t *objectp = &ddt->ddt_object[type][class];
uint64_t count;
char name[DDT_NAMELEN];
ddt_object_name(ddt, type, class, name);
ASSERT3U(*objectp, !=, 0);
ASSERT(ddt_histogram_empty(&ddt->ddt_histogram[type][class]));
VERIFY0(ddt_object_count(ddt, type, class, &count));
VERIFY0(count);
VERIFY0(zap_remove(os, DMU_POOL_DIRECTORY_OBJECT, name, tx));
VERIFY0(zap_remove(os, spa->spa_ddt_stat_object, name, tx));
VERIFY0(ddt_ops[type]->ddt_op_destroy(os, *objectp, tx));
memset(&ddt->ddt_object_stats[type][class], 0, sizeof (ddt_object_t));
*objectp = 0;
}
static int
ddt_object_load(ddt_t *ddt, ddt_type_t type, ddt_class_t class)
{
ddt_object_t *ddo = &ddt->ddt_object_stats[type][class];
dmu_object_info_t doi;
uint64_t count;
char name[DDT_NAMELEN];
int error;
ddt_object_name(ddt, type, class, name);
error = zap_lookup(ddt->ddt_os, DMU_POOL_DIRECTORY_OBJECT, name,
sizeof (uint64_t), 1, &ddt->ddt_object[type][class]);
if (error != 0)
return (error);
error = zap_lookup(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name,
sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t),
&ddt->ddt_histogram[type][class]);
if (error != 0)
return (error);
/*
* Seed the cached statistics.
*/
error = ddt_object_info(ddt, type, class, &doi);
if (error)
return (error);
error = ddt_object_count(ddt, type, class, &count);
if (error)
return (error);
ddo->ddo_count = count;
ddo->ddo_dspace = doi.doi_physical_blocks_512 << 9;
ddo->ddo_mspace = doi.doi_fill_count * doi.doi_data_block_size;
return (0);
}
static void
ddt_object_sync(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
dmu_tx_t *tx)
{
ddt_object_t *ddo = &ddt->ddt_object_stats[type][class];
dmu_object_info_t doi;
uint64_t count;
char name[DDT_NAMELEN];
ddt_object_name(ddt, type, class, name);
VERIFY0(zap_update(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name,
sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t),
&ddt->ddt_histogram[type][class], tx));
/*
* Cache DDT statistics; this is the only time they'll change.
*/
VERIFY0(ddt_object_info(ddt, type, class, &doi));
VERIFY0(ddt_object_count(ddt, type, class, &count));
ddo->ddo_count = count;
ddo->ddo_dspace = doi.doi_physical_blocks_512 << 9;
ddo->ddo_mspace = doi.doi_fill_count * doi.doi_data_block_size;
}
static boolean_t
ddt_object_exists(ddt_t *ddt, ddt_type_t type, ddt_class_t class)
{
return (!!ddt->ddt_object[type][class]);
}
static int
ddt_object_lookup(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
ddt_entry_t *dde)
{
if (!ddt_object_exists(ddt, type, class))
return (SET_ERROR(ENOENT));
return (ddt_ops[type]->ddt_op_lookup(ddt->ddt_os,
ddt->ddt_object[type][class], &dde->dde_key,
dde->dde_phys, sizeof (dde->dde_phys)));
}
static int
ddt_object_contains(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
const ddt_key_t *ddk)
{
if (!ddt_object_exists(ddt, type, class))
return (SET_ERROR(ENOENT));
return (ddt_ops[type]->ddt_op_contains(ddt->ddt_os,
ddt->ddt_object[type][class], ddk));
}
static void
ddt_object_prefetch(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
const ddt_key_t *ddk)
{
if (!ddt_object_exists(ddt, type, class))
return;
ddt_ops[type]->ddt_op_prefetch(ddt->ddt_os,
ddt->ddt_object[type][class], ddk);
}
static void
ddt_object_prefetch_all(ddt_t *ddt, ddt_type_t type, ddt_class_t class)
{
if (!ddt_object_exists(ddt, type, class))
return;
ddt_ops[type]->ddt_op_prefetch_all(ddt->ddt_os,
ddt->ddt_object[type][class]);
}
static int
ddt_object_update(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
ddt_entry_t *dde, dmu_tx_t *tx)
{
ASSERT(ddt_object_exists(ddt, type, class));
return (ddt_ops[type]->ddt_op_update(ddt->ddt_os,
ddt->ddt_object[type][class], &dde->dde_key, dde->dde_phys,
sizeof (dde->dde_phys), tx));
}
static int
ddt_object_remove(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
const ddt_key_t *ddk, dmu_tx_t *tx)
{
ASSERT(ddt_object_exists(ddt, type, class));
return (ddt_ops[type]->ddt_op_remove(ddt->ddt_os,
ddt->ddt_object[type][class], ddk, tx));
}
int
ddt_object_walk(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
uint64_t *walk, ddt_entry_t *dde)
{
ASSERT(ddt_object_exists(ddt, type, class));
return (ddt_ops[type]->ddt_op_walk(ddt->ddt_os,
ddt->ddt_object[type][class], walk, &dde->dde_key,
dde->dde_phys, sizeof (dde->dde_phys)));
}
int
ddt_object_count(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
uint64_t *count)
{
ASSERT(ddt_object_exists(ddt, type, class));
return (ddt_ops[type]->ddt_op_count(ddt->ddt_os,
ddt->ddt_object[type][class], count));
}
int
ddt_object_info(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
dmu_object_info_t *doi)
{
if (!ddt_object_exists(ddt, type, class))
return (SET_ERROR(ENOENT));
return (dmu_object_info(ddt->ddt_os, ddt->ddt_object[type][class],
doi));
}
void
ddt_object_name(ddt_t *ddt, ddt_type_t type, ddt_class_t class,
char *name)
{
(void) snprintf(name, DDT_NAMELEN, DMU_POOL_DDT,
zio_checksum_table[ddt->ddt_checksum].ci_name,
ddt_ops[type]->ddt_op_name, ddt_class_name[class]);
}
void
ddt_bp_fill(const ddt_phys_t *ddp, blkptr_t *bp, uint64_t txg)
{
ASSERT3U(txg, !=, 0);
for (int d = 0; d < SPA_DVAS_PER_BP; d++)
bp->blk_dva[d] = ddp->ddp_dva[d];
BP_SET_BIRTH(bp, txg, ddp->ddp_phys_birth);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
/*
* The bp created via this function may be used for repairs and scrub, but it
* will be missing the salt / IV required to do a full decrypting read.
*/
void
ddt_bp_create(enum zio_checksum checksum,
const ddt_key_t *ddk, const ddt_phys_t *ddp, blkptr_t *bp)
{
BP_ZERO(bp);
if (ddp != NULL)
ddt_bp_fill(ddp, bp, ddp->ddp_phys_birth);
bp->blk_cksum = ddk->ddk_cksum;
BP_SET_LSIZE(bp, DDK_GET_LSIZE(ddk));
BP_SET_PSIZE(bp, DDK_GET_PSIZE(ddk));
BP_SET_COMPRESS(bp, DDK_GET_COMPRESS(ddk));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
BP_SET_CRYPT(bp, DDK_GET_CRYPT(ddk));
BP_SET_FILL(bp, 1);
BP_SET_CHECKSUM(bp, checksum);
BP_SET_TYPE(bp, DMU_OT_DEDUP);
BP_SET_LEVEL(bp, 0);
BP_SET_DEDUP(bp, 1);
BP_SET_BYTEORDER(bp, ZFS_HOST_BYTEORDER);
}
void
ddt_key_fill(ddt_key_t *ddk, const blkptr_t *bp)
{
ddk->ddk_cksum = bp->blk_cksum;
ddk->ddk_prop = 0;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
ASSERT(BP_IS_ENCRYPTED(bp) || !BP_USES_CRYPT(bp));
DDK_SET_LSIZE(ddk, BP_GET_LSIZE(bp));
DDK_SET_PSIZE(ddk, BP_GET_PSIZE(bp));
DDK_SET_COMPRESS(ddk, BP_GET_COMPRESS(bp));
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 20:36:48 +03:00
DDK_SET_CRYPT(ddk, BP_USES_CRYPT(bp));
}
void
ddt_phys_fill(ddt_phys_t *ddp, const blkptr_t *bp)
{
ASSERT0(ddp->ddp_phys_birth);
for (int d = 0; d < SPA_DVAS_PER_BP; d++)
ddp->ddp_dva[d] = bp->blk_dva[d];
ddp->ddp_phys_birth = BP_GET_BIRTH(bp);
}
void
ddt_phys_clear(ddt_phys_t *ddp)
{
memset(ddp, 0, sizeof (*ddp));
}
void
ddt_phys_addref(ddt_phys_t *ddp)
{
ddp->ddp_refcnt++;
}
void
ddt_phys_decref(ddt_phys_t *ddp)
{
if (ddp) {
ASSERT3U(ddp->ddp_refcnt, >, 0);
ddp->ddp_refcnt--;
}
}
static void
ddt_phys_free(ddt_t *ddt, ddt_key_t *ddk, ddt_phys_t *ddp, uint64_t txg)
{
blkptr_t blk;
ddt_bp_create(ddt->ddt_checksum, ddk, ddp, &blk);
/*
* We clear the dedup bit so that zio_free() will actually free the
* space, rather than just decrementing the refcount in the DDT.
*/
BP_SET_DEDUP(&blk, 0);
ddt_phys_clear(ddp);
zio_free(ddt->ddt_spa, txg, &blk);
}
ddt_phys_t *
ddt_phys_select(const ddt_entry_t *dde, const blkptr_t *bp)
{
ddt_phys_t *ddp = (ddt_phys_t *)dde->dde_phys;
for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
if (DVA_EQUAL(BP_IDENTITY(bp), &ddp->ddp_dva[0]) &&
BP_GET_BIRTH(bp) == ddp->ddp_phys_birth)
return (ddp);
}
return (NULL);
}
uint64_t
ddt_phys_total_refcnt(const ddt_entry_t *dde)
{
uint64_t refcnt = 0;
for (int p = DDT_PHYS_SINGLE; p <= DDT_PHYS_TRIPLE; p++)
refcnt += dde->dde_phys[p].ddp_refcnt;
return (refcnt);
}
ddt_t *
ddt_select(spa_t *spa, const blkptr_t *bp)
{
ASSERT(DDT_CHECKSUM_VALID(BP_GET_CHECKSUM(bp)));
return (spa->spa_ddt[BP_GET_CHECKSUM(bp)]);
}
void
ddt_enter(ddt_t *ddt)
{
mutex_enter(&ddt->ddt_lock);
}
void
ddt_exit(ddt_t *ddt)
{
mutex_exit(&ddt->ddt_lock);
}
void
ddt_init(void)
{
ddt_cache = kmem_cache_create("ddt_cache",
sizeof (ddt_t), 0, NULL, NULL, NULL, NULL, NULL, 0);
ddt_entry_cache = kmem_cache_create("ddt_entry_cache",
sizeof (ddt_entry_t), 0, NULL, NULL, NULL, NULL, NULL, 0);
}
void
ddt_fini(void)
{
kmem_cache_destroy(ddt_entry_cache);
kmem_cache_destroy(ddt_cache);
}
static ddt_entry_t *
ddt_alloc(const ddt_key_t *ddk)
{
ddt_entry_t *dde;
dde = kmem_cache_alloc(ddt_entry_cache, KM_SLEEP);
memset(dde, 0, sizeof (ddt_entry_t));
cv_init(&dde->dde_cv, NULL, CV_DEFAULT, NULL);
dde->dde_key = *ddk;
return (dde);
}
static void
ddt_free(ddt_entry_t *dde)
{
for (int p = 0; p < DDT_PHYS_TYPES; p++)
ASSERT3P(dde->dde_lead_zio[p], ==, NULL);
if (dde->dde_repair_abd != NULL)
abd_free(dde->dde_repair_abd);
cv_destroy(&dde->dde_cv);
kmem_cache_free(ddt_entry_cache, dde);
}
void
ddt_remove(ddt_t *ddt, ddt_entry_t *dde)
{
ASSERT(MUTEX_HELD(&ddt->ddt_lock));
avl_remove(&ddt->ddt_tree, dde);
ddt_free(dde);
}
static boolean_t
ddt_special_over_quota(spa_t *spa, metaslab_class_t *mc)
{
if (mc != NULL && metaslab_class_get_space(mc) > 0) {
/* Over quota if allocating outside of this special class */
if (spa_syncing_txg(spa) <= spa->spa_dedup_class_full_txg +
dedup_class_wait_txgs) {
/* Waiting for some deferred frees to be processed */
return (B_TRUE);
}
/*
* We're considered over quota when we hit 85% full, or for
* larger drives, when there is less than 8GB free.
*/
uint64_t allocated = metaslab_class_get_alloc(mc);
uint64_t capacity = metaslab_class_get_space(mc);
uint64_t limit = MAX(capacity * 85 / 100,
(capacity > (1LL<<33)) ? capacity - (1LL<<33) : 0);
return (allocated >= limit);
}
return (B_FALSE);
}
/*
* Check if the DDT is over its quota. This can be due to a few conditions:
* 1. 'dedup_table_quota' property is not 0 (none) and the dedup dsize
* exceeds this limit
*
* 2. 'dedup_table_quota' property is set to automatic and
* a. the dedup or special allocation class could not satisfy a DDT
* allocation in a recent transaction
* b. the dedup or special allocation class has exceeded its 85% limit
*/
static boolean_t
ddt_over_quota(spa_t *spa)
{
if (spa->spa_dedup_table_quota == 0)
return (B_FALSE);
if (spa->spa_dedup_table_quota != UINT64_MAX)
return (ddt_get_ddt_dsize(spa) > spa->spa_dedup_table_quota);
/*
* For automatic quota, table size is limited by dedup or special class
*/
if (ddt_special_over_quota(spa, spa_dedup_class(spa)))
return (B_TRUE);
else if (spa_special_has_ddt(spa) &&
ddt_special_over_quota(spa, spa_special_class(spa)))
return (B_TRUE);
return (B_FALSE);
}
void
ddt_prefetch_all(spa_t *spa)
{
/*
* Load all DDT entries for each type/class combination. This is
* indended to perform a prefetch on all such blocks. For the same
* reason that ddt_prefetch isn't locked, this is also not locked.
*/
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
ddt_t *ddt = spa->spa_ddt[c];
if (!ddt)
continue;
for (ddt_type_t type = 0; type < DDT_TYPES; type++) {
for (ddt_class_t class = 0; class < DDT_CLASSES;
class++) {
ddt_object_prefetch_all(ddt, type, class);
}
}
}
}
ddt_entry_t *
ddt_lookup(ddt_t *ddt, const blkptr_t *bp, boolean_t add)
{
spa_t *spa = ddt->ddt_spa;
ddt_key_t search;
ddt_entry_t *dde;
ddt_type_t type;
ddt_class_t class;
avl_index_t where;
int error;
ASSERT(MUTEX_HELD(&ddt->ddt_lock));
ddt_key_fill(&search, bp);
/* Find an existing live entry */
dde = avl_find(&ddt->ddt_tree, &search, &where);
if (dde != NULL) {
/* If we went over quota, act like we didn't find it */
if (dde->dde_flags & DDE_FLAG_OVERQUOTA)
return (NULL);
/* If it's already loaded, we can just return it. */
if (dde->dde_flags & DDE_FLAG_LOADED)
return (dde);
/* Someone else is loading it, wait for it. */
dde->dde_waiters++;
while (!(dde->dde_flags & DDE_FLAG_LOADED))
cv_wait(&dde->dde_cv, &ddt->ddt_lock);
dde->dde_waiters--;
/* Loaded but over quota, forget we were ever here */
if (dde->dde_flags & DDE_FLAG_OVERQUOTA) {
if (dde->dde_waiters == 0) {
avl_remove(&ddt->ddt_tree, dde);
ddt_free(dde);
}
return (NULL);
}
return (dde);
}
/* Not found. */
if (!add)
return (NULL);
/* Time to make a new entry. */
dde = ddt_alloc(&search);
avl_insert(&ddt->ddt_tree, dde, where);
/*
* ddt_tree is now stable, so unlock and let everyone else keep moving.
* Anyone landing on this entry will find it without DDE_FLAG_LOADED,
* and go to sleep waiting for it above.
*/
ddt_exit(ddt);
/* Search all store objects for the entry. */
error = ENOENT;
for (type = 0; type < DDT_TYPES; type++) {
for (class = 0; class < DDT_CLASSES; class++) {
error = ddt_object_lookup(ddt, type, class, dde);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
if (error != ENOENT) {
ASSERT0(error);
break;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
}
}
if (error != ENOENT)
break;
}
ddt_enter(ddt);
ASSERT(!(dde->dde_flags & DDE_FLAG_LOADED));
dde->dde_type = type; /* will be DDT_TYPES if no entry found */
dde->dde_class = class; /* will be DDT_CLASSES if no entry found */
if (dde->dde_type == DDT_TYPES &&
dde->dde_class == DDT_CLASSES &&
ddt_over_quota(spa)) {
/* Over quota. If no one is waiting, clean up right now. */
if (dde->dde_waiters == 0) {
avl_remove(&ddt->ddt_tree, dde);
ddt_free(dde);
return (NULL);
}
/* Flag cleanup required */
dde->dde_flags |= DDE_FLAG_OVERQUOTA;
} else if (error == 0) {
ddt_stat_update(ddt, dde, -1ULL);
}
/* Entry loaded, everyone can proceed now */
dde->dde_flags |= DDE_FLAG_LOADED;
cv_broadcast(&dde->dde_cv);
return (dde->dde_flags & DDE_FLAG_OVERQUOTA ? NULL : dde);
}
void
ddt_prefetch(spa_t *spa, const blkptr_t *bp)
{
ddt_t *ddt;
ddt_key_t ddk;
if (!zfs_dedup_prefetch || bp == NULL || !BP_GET_DEDUP(bp))
return;
/*
* We only remove the DDT once all tables are empty and only
* prefetch dedup blocks when there are entries in the DDT.
* Thus no locking is required as the DDT can't disappear on us.
*/
ddt = ddt_select(spa, bp);
ddt_key_fill(&ddk, bp);
for (ddt_type_t type = 0; type < DDT_TYPES; type++) {
for (ddt_class_t class = 0; class < DDT_CLASSES; class++) {
ddt_object_prefetch(ddt, type, class, &ddk);
}
}
}
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
/*
* Key comparison. Any struct wanting to make use of this function must have
* the key as the first element.
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
*/
#define DDT_KEY_CMP_LEN (sizeof (ddt_key_t) / sizeof (uint16_t))
typedef struct ddt_key_cmp {
uint16_t u16[DDT_KEY_CMP_LEN];
} ddt_key_cmp_t;
int
ddt_key_compare(const void *x1, const void *x2)
{
const ddt_key_cmp_t *k1 = (const ddt_key_cmp_t *)x1;
const ddt_key_cmp_t *k2 = (const ddt_key_cmp_t *)x2;
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
int32_t cmp = 0;
for (int i = 0; i < DDT_KEY_CMP_LEN; i++) {
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 21:12:53 +03:00
cmp = (int32_t)k1->u16[i] - (int32_t)k2->u16[i];
if (likely(cmp))
break;
}
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 20:36:03 +03:00
return (TREE_ISIGN(cmp));
}
static ddt_t *
ddt_table_alloc(spa_t *spa, enum zio_checksum c)
{
ddt_t *ddt;
ddt = kmem_cache_alloc(ddt_cache, KM_SLEEP);
memset(ddt, 0, sizeof (ddt_t));
mutex_init(&ddt->ddt_lock, NULL, MUTEX_DEFAULT, NULL);
avl_create(&ddt->ddt_tree, ddt_key_compare,
sizeof (ddt_entry_t), offsetof(ddt_entry_t, dde_node));
avl_create(&ddt->ddt_repair_tree, ddt_key_compare,
sizeof (ddt_entry_t), offsetof(ddt_entry_t, dde_node));
ddt->ddt_checksum = c;
ddt->ddt_spa = spa;
ddt->ddt_os = spa->spa_meta_objset;
return (ddt);
}
static void
ddt_table_free(ddt_t *ddt)
{
ASSERT0(avl_numnodes(&ddt->ddt_tree));
ASSERT0(avl_numnodes(&ddt->ddt_repair_tree));
avl_destroy(&ddt->ddt_tree);
avl_destroy(&ddt->ddt_repair_tree);
mutex_destroy(&ddt->ddt_lock);
kmem_cache_free(ddt_cache, ddt);
}
void
ddt_create(spa_t *spa)
{
spa->spa_dedup_checksum = ZIO_DEDUPCHECKSUM;
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
if (DDT_CHECKSUM_VALID(c))
spa->spa_ddt[c] = ddt_table_alloc(spa, c);
}
}
int
ddt_load(spa_t *spa)
{
int error;
ddt_create(spa);
error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_DDT_STATS, sizeof (uint64_t), 1,
&spa->spa_ddt_stat_object);
if (error)
return (error == ENOENT ? 0 : error);
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
if (!DDT_CHECKSUM_VALID(c))
continue;
ddt_t *ddt = spa->spa_ddt[c];
for (ddt_type_t type = 0; type < DDT_TYPES; type++) {
for (ddt_class_t class = 0; class < DDT_CLASSES;
class++) {
error = ddt_object_load(ddt, type, class);
if (error != 0 && error != ENOENT)
return (error);
}
}
/*
* Seed the cached histograms.
*/
memcpy(&ddt->ddt_histogram_cache, ddt->ddt_histogram,
sizeof (ddt->ddt_histogram));
spa->spa_dedup_dspace = ~0ULL;
spa->spa_dedup_dsize = ~0ULL;
}
return (0);
}
void
ddt_unload(spa_t *spa)
{
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
if (spa->spa_ddt[c]) {
ddt_table_free(spa->spa_ddt[c]);
spa->spa_ddt[c] = NULL;
}
}
}
boolean_t
ddt_class_contains(spa_t *spa, ddt_class_t max_class, const blkptr_t *bp)
{
ddt_t *ddt;
ddt_key_t ddk;
if (!BP_GET_DEDUP(bp))
return (B_FALSE);
if (max_class == DDT_CLASS_UNIQUE)
return (B_TRUE);
ddt = spa->spa_ddt[BP_GET_CHECKSUM(bp)];
ddt_key_fill(&ddk, bp);
for (ddt_type_t type = 0; type < DDT_TYPES; type++) {
for (ddt_class_t class = 0; class <= max_class; class++) {
if (ddt_object_contains(ddt, type, class, &ddk) == 0)
return (B_TRUE);
}
}
return (B_FALSE);
}
ddt_entry_t *
ddt_repair_start(ddt_t *ddt, const blkptr_t *bp)
{
ddt_key_t ddk;
ddt_entry_t *dde;
ddt_key_fill(&ddk, bp);
dde = ddt_alloc(&ddk);
for (ddt_type_t type = 0; type < DDT_TYPES; type++) {
for (ddt_class_t class = 0; class < DDT_CLASSES; class++) {
/*
* We can only do repair if there are multiple copies
* of the block. For anything in the UNIQUE class,
* there's definitely only one copy, so don't even try.
*/
if (class != DDT_CLASS_UNIQUE &&
ddt_object_lookup(ddt, type, class, dde) == 0)
return (dde);
}
}
memset(dde->dde_phys, 0, sizeof (dde->dde_phys));
return (dde);
}
void
ddt_repair_done(ddt_t *ddt, ddt_entry_t *dde)
{
avl_index_t where;
ddt_enter(ddt);
if (dde->dde_repair_abd != NULL && spa_writeable(ddt->ddt_spa) &&
avl_find(&ddt->ddt_repair_tree, dde, &where) == NULL)
avl_insert(&ddt->ddt_repair_tree, dde, where);
else
ddt_free(dde);
ddt_exit(ddt);
}
static void
ddt_repair_entry_done(zio_t *zio)
{
ddt_entry_t *rdde = zio->io_private;
ddt_free(rdde);
}
static void
ddt_repair_entry(ddt_t *ddt, ddt_entry_t *dde, ddt_entry_t *rdde, zio_t *rio)
{
ddt_phys_t *ddp = dde->dde_phys;
ddt_phys_t *rddp = rdde->dde_phys;
ddt_key_t *ddk = &dde->dde_key;
ddt_key_t *rddk = &rdde->dde_key;
zio_t *zio;
blkptr_t blk;
zio = zio_null(rio, rio->io_spa, NULL,
ddt_repair_entry_done, rdde, rio->io_flags);
for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++, rddp++) {
if (ddp->ddp_phys_birth == 0 ||
ddp->ddp_phys_birth != rddp->ddp_phys_birth ||
memcmp(ddp->ddp_dva, rddp->ddp_dva, sizeof (ddp->ddp_dva)))
continue;
ddt_bp_create(ddt->ddt_checksum, ddk, ddp, &blk);
zio_nowait(zio_rewrite(zio, zio->io_spa, 0, &blk,
rdde->dde_repair_abd, DDK_GET_PSIZE(rddk), NULL, NULL,
ZIO_PRIORITY_SYNC_WRITE, ZIO_DDT_CHILD_FLAGS(zio), NULL));
}
zio_nowait(zio);
}
static void
ddt_repair_table(ddt_t *ddt, zio_t *rio)
{
spa_t *spa = ddt->ddt_spa;
ddt_entry_t *dde, *rdde_next, *rdde;
avl_tree_t *t = &ddt->ddt_repair_tree;
blkptr_t blk;
if (spa_sync_pass(spa) > 1)
return;
ddt_enter(ddt);
for (rdde = avl_first(t); rdde != NULL; rdde = rdde_next) {
rdde_next = AVL_NEXT(t, rdde);
avl_remove(&ddt->ddt_repair_tree, rdde);
ddt_exit(ddt);
ddt_bp_create(ddt->ddt_checksum, &rdde->dde_key, NULL, &blk);
dde = ddt_repair_start(ddt, &blk);
ddt_repair_entry(ddt, dde, rdde, rio);
ddt_repair_done(ddt, dde);
ddt_enter(ddt);
}
ddt_exit(ddt);
}
static void
ddt_sync_entry(ddt_t *ddt, ddt_entry_t *dde, dmu_tx_t *tx, uint64_t txg)
{
dsl_pool_t *dp = ddt->ddt_spa->spa_dsl_pool;
ddt_phys_t *ddp = dde->dde_phys;
ddt_key_t *ddk = &dde->dde_key;
ddt_type_t otype = dde->dde_type;
ddt_type_t ntype = DDT_TYPE_DEFAULT;
ddt_class_t oclass = dde->dde_class;
ddt_class_t nclass;
uint64_t total_refcnt = 0;
ASSERT(dde->dde_flags & DDE_FLAG_LOADED);
for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
ASSERT3P(dde->dde_lead_zio[p], ==, NULL);
if (ddp->ddp_phys_birth == 0) {
ASSERT0(ddp->ddp_refcnt);
continue;
}
if (p == DDT_PHYS_DITTO) {
Remove dedupditto functionality If dedup is in use, the `dedupditto` property can be set, causing ZFS to keep an extra copy of data that is referenced many times (>100x). The idea was that this data is more important than other data and thus we want to be really sure that it is not lost if the disk experiences a small amount of random corruption. ZFS (and system administrators) rely on the pool-level redundancy to protect their data (e.g. mirroring or RAIDZ). Since the user/sysadmin doesn't have control over what data will be offered extra redundancy by dedupditto, this extra redundancy is not very useful. The bulk of the data is still vulnerable to loss based on the pool-level redundancy. For example, if particle strikes corrupt 0.1% of blocks, you will either be saved by mirror/raidz, or you will be sad. This is true even if dedupditto saved another 0.01% of blocks from being corrupted. Therefore, the dedupditto functionality is rarely enabled (i.e. the property is rarely set), and it fulfills its promise of increased redundancy even more rarely. Additionally, this feature does not work as advertised (on existing releases), because scrub/resilver did not repair the extra (dedupditto) copy (see https://github.com/zfsonlinux/zfs/pull/8270). In summary, this seldom-used feature doesn't work, and even if it did it wouldn't provide useful data protection. It has a non-trivial maintenance burden (again see https://github.com/zfsonlinux/zfs/pull/8270). We should remove the dedupditto functionality. For backwards compatibility with the existing CLI, "zpool set dedupditto" will still "succeed" (exit code zero), but won't have any effect. For backwards compatibility with existing pools that had dedupditto enabled at some point, the code will still be able to understand dedupditto blocks and free them when appropriate. However, ZFS won't write any new dedupditto blocks. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Alek Pinchuk <apinchuk@datto.com> Issue #8270 Closes #8310
2019-06-20 00:54:02 +03:00
/*
* Note, we no longer create DDT-DITTO blocks, but we
* don't want to leak any written by older software.
*/
ddt_phys_free(ddt, ddk, ddp, txg);
continue;
}
if (ddp->ddp_refcnt == 0)
ddt_phys_free(ddt, ddk, ddp, txg);
total_refcnt += ddp->ddp_refcnt;
}
Remove dedupditto functionality If dedup is in use, the `dedupditto` property can be set, causing ZFS to keep an extra copy of data that is referenced many times (>100x). The idea was that this data is more important than other data and thus we want to be really sure that it is not lost if the disk experiences a small amount of random corruption. ZFS (and system administrators) rely on the pool-level redundancy to protect their data (e.g. mirroring or RAIDZ). Since the user/sysadmin doesn't have control over what data will be offered extra redundancy by dedupditto, this extra redundancy is not very useful. The bulk of the data is still vulnerable to loss based on the pool-level redundancy. For example, if particle strikes corrupt 0.1% of blocks, you will either be saved by mirror/raidz, or you will be sad. This is true even if dedupditto saved another 0.01% of blocks from being corrupted. Therefore, the dedupditto functionality is rarely enabled (i.e. the property is rarely set), and it fulfills its promise of increased redundancy even more rarely. Additionally, this feature does not work as advertised (on existing releases), because scrub/resilver did not repair the extra (dedupditto) copy (see https://github.com/zfsonlinux/zfs/pull/8270). In summary, this seldom-used feature doesn't work, and even if it did it wouldn't provide useful data protection. It has a non-trivial maintenance burden (again see https://github.com/zfsonlinux/zfs/pull/8270). We should remove the dedupditto functionality. For backwards compatibility with the existing CLI, "zpool set dedupditto" will still "succeed" (exit code zero), but won't have any effect. For backwards compatibility with existing pools that had dedupditto enabled at some point, the code will still be able to understand dedupditto blocks and free them when appropriate. However, ZFS won't write any new dedupditto blocks. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Alek Pinchuk <apinchuk@datto.com> Issue #8270 Closes #8310
2019-06-20 00:54:02 +03:00
/* We do not create new DDT-DITTO blocks. */
ASSERT0(dde->dde_phys[DDT_PHYS_DITTO].ddp_phys_birth);
if (total_refcnt > 1)
nclass = DDT_CLASS_DUPLICATE;
else
nclass = DDT_CLASS_UNIQUE;
if (otype != DDT_TYPES &&
(otype != ntype || oclass != nclass || total_refcnt == 0)) {
VERIFY0(ddt_object_remove(ddt, otype, oclass, ddk, tx));
ASSERT3U(
ddt_object_contains(ddt, otype, oclass, ddk), ==, ENOENT);
}
if (total_refcnt != 0) {
dde->dde_type = ntype;
dde->dde_class = nclass;
ddt_stat_update(ddt, dde, 0);
if (!ddt_object_exists(ddt, ntype, nclass))
ddt_object_create(ddt, ntype, nclass, tx);
VERIFY0(ddt_object_update(ddt, ntype, nclass, dde, tx));
/*
* If the class changes, the order that we scan this bp
* changes. If it decreases, we could miss it, so
* scan it right now. (This covers both class changing
* while we are doing ddt_walk(), and when we are
* traversing.)
*/
if (nclass < oclass) {
dsl_scan_ddt_entry(dp->dp_scan,
ddt->ddt_checksum, dde, tx);
}
}
}
static void
ddt_sync_table(ddt_t *ddt, dmu_tx_t *tx, uint64_t txg)
{
spa_t *spa = ddt->ddt_spa;
ddt_entry_t *dde;
void *cookie = NULL;
if (avl_numnodes(&ddt->ddt_tree) == 0)
return;
ASSERT3U(spa->spa_uberblock.ub_version, >=, SPA_VERSION_DEDUP);
if (spa->spa_ddt_stat_object == 0) {
spa->spa_ddt_stat_object = zap_create_link(ddt->ddt_os,
DMU_OT_DDT_STATS, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_DDT_STATS, tx);
}
while ((dde = avl_destroy_nodes(&ddt->ddt_tree, &cookie)) != NULL) {
ddt_sync_entry(ddt, dde, tx, txg);
ddt_free(dde);
}
for (ddt_type_t type = 0; type < DDT_TYPES; type++) {
uint64_t add, count = 0;
for (ddt_class_t class = 0; class < DDT_CLASSES; class++) {
if (ddt_object_exists(ddt, type, class)) {
ddt_object_sync(ddt, type, class, tx);
VERIFY0(ddt_object_count(ddt, type, class,
&add));
count += add;
}
}
for (ddt_class_t class = 0; class < DDT_CLASSES; class++) {
if (count == 0 && ddt_object_exists(ddt, type, class))
ddt_object_destroy(ddt, type, class, tx);
}
}
memcpy(&ddt->ddt_histogram_cache, ddt->ddt_histogram,
sizeof (ddt->ddt_histogram));
spa->spa_dedup_dspace = ~0ULL;
spa->spa_dedup_dsize = ~0ULL;
}
void
ddt_sync(spa_t *spa, uint64_t txg)
{
dsl_scan_t *scn = spa->spa_dsl_pool->dp_scan;
dmu_tx_t *tx;
zio_t *rio;
ASSERT3U(spa_syncing_txg(spa), ==, txg);
tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg);
rio = zio_root(spa, NULL, NULL,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 19:30:13 +03:00
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SELF_HEAL);
/*
* This function may cause an immediate scan of ddt blocks (see
* the comment above dsl_scan_ddt() for details). We set the
* scan's root zio here so that we can wait for any scan IOs in
* addition to the regular ddt IOs.
*/
ASSERT3P(scn->scn_zio_root, ==, NULL);
scn->scn_zio_root = rio;
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
ddt_t *ddt = spa->spa_ddt[c];
if (ddt == NULL)
continue;
ddt_sync_table(ddt, tx, txg);
ddt_repair_table(ddt, rio);
}
(void) zio_wait(rio);
scn->scn_zio_root = NULL;
dmu_tx_commit(tx);
}
int
ddt_walk(spa_t *spa, ddt_bookmark_t *ddb, ddt_entry_t *dde)
{
do {
do {
do {
ddt_t *ddt = spa->spa_ddt[ddb->ddb_checksum];
if (ddt == NULL)
continue;
int error = ENOENT;
if (ddt_object_exists(ddt, ddb->ddb_type,
ddb->ddb_class)) {
error = ddt_object_walk(ddt,
ddb->ddb_type, ddb->ddb_class,
&ddb->ddb_cursor, dde);
}
dde->dde_type = ddb->ddb_type;
dde->dde_class = ddb->ddb_class;
if (error == 0)
return (0);
if (error != ENOENT)
return (error);
ddb->ddb_cursor = 0;
} while (++ddb->ddb_checksum < ZIO_CHECKSUM_FUNCTIONS);
ddb->ddb_checksum = 0;
} while (++ddb->ddb_type < DDT_TYPES);
ddb->ddb_type = 0;
} while (++ddb->ddb_class < DDT_CLASSES);
return (SET_ERROR(ENOENT));
}
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 02:09:28 +04:00
/*
* This function is used by Block Cloning (brt.c) to increase reference
* counter for the DDT entry if the block is already in DDT.
*
* Return false if the block, despite having the D bit set, is not present
* in the DDT. Currently this is not possible but might be in the future.
* See the comment below.
*/
boolean_t
ddt_addref(spa_t *spa, const blkptr_t *bp)
{
ddt_t *ddt;
ddt_entry_t *dde;
boolean_t result;
spa_config_enter(spa, SCL_ZIO, FTAG, RW_READER);
ddt = ddt_select(spa, bp);
ddt_enter(ddt);
dde = ddt_lookup(ddt, bp, B_TRUE);
/* Can be NULL if the entry for this block was pruned. */
if (dde == NULL) {
ddt_exit(ddt);
spa_config_exit(spa, SCL_ZIO, FTAG);
return (B_FALSE);
}
if (dde->dde_type < DDT_TYPES) {
ddt_phys_t *ddp;
ASSERT3S(dde->dde_class, <, DDT_CLASSES);
ddp = &dde->dde_phys[BP_GET_NDVAS(bp)];
/*
* This entry already existed (dde_type is real), so it must
* have refcnt >0 at the start of this txg. We are called from
* brt_pending_apply(), before frees are issued, so the refcnt
* can't be lowered yet. Therefore, it must be >0. We assert
* this because if the order of BRT and DDT interactions were
* ever to change and the refcnt was ever zero here, then
* likely further action is required to fill out the DDT entry,
* and this is a place that is likely to be missed in testing.
*/
ASSERT3U(ddp->ddp_refcnt, >, 0);
ddt_phys_addref(ddp);
result = B_TRUE;
} else {
/*
* At the time of implementating this if the block has the
* DEDUP flag set it must exist in the DEDUP table, but
* there are many advocates that want ability to remove
* entries from DDT with refcnt=1. If this will happen,
* we may have a block with the DEDUP set, but which doesn't
* have a corresponding entry in the DDT. Be ready.
*/
ASSERT3S(dde->dde_class, ==, DDT_CLASSES);
ddt_remove(ddt, dde);
result = B_FALSE;
}
ddt_exit(ddt);
spa_config_exit(spa, SCL_ZIO, FTAG);
return (result);
}
ZFS_MODULE_PARAM(zfs_dedup, zfs_dedup_, prefetch, INT, ZMOD_RW,
"Enable prefetching dedup-ed blks");