mirror_zfs/lib/libzpool/abd_os.c

430 lines
11 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2014 by Chunwei Chen. All rights reserved.
* Copyright (c) 2019 by Delphix. All rights reserved.
* Copyright (c) 2023, 2024, Klara Inc.
*/
#include <sys/abd_impl.h>
#include <sys/param.h>
#include <sys/zio.h>
#include <sys/arc.h>
#include <sys/zfs_context.h>
#include <sys/zfs_znode.h>
/*
* We're simulating scatter/gather with 4K allocations, since that's more like
* what a typical kernel does.
*/
#define ABD_PAGESIZE (4096)
#define ABD_PAGESHIFT (12)
#define ABD_PAGEMASK (ABD_PAGESIZE-1)
/*
* See rationale in module/os/linux/zfs/abd_os.c, but in userspace this is
* mostly useful to get a mix of linear and scatter ABDs for testing.
*/
#define ABD_SCATTER_MIN_SIZE (512 * 3)
abd_t *abd_zero_scatter = NULL;
static uint_t
abd_iovcnt_for_bytes(size_t size)
{
/*
* Each iovec points to a 4K page. There's no real reason to do this
* in userspace, but our whole point here is to make it feel a bit
* more like a real paged memory model.
*/
return (P2ROUNDUP(size, ABD_PAGESIZE) / ABD_PAGESIZE);
}
abd_t *
abd_alloc_struct_impl(size_t size)
{
/*
* Zero-sized means it will be used for a linear or gang abd, so just
* allocate the abd itself and return.
*/
if (size == 0)
return (umem_alloc(sizeof (abd_t), UMEM_NOFAIL));
/*
* Allocating for a scatter abd, so compute how many ABD_PAGESIZE
* iovecs we will need to hold this size. Append that allocation to the
* end. Note that struct abd_scatter has includes abd_iov[1], so we
* allocate one less iovec than we need.
*
* Note we're not allocating the pages proper, just the iovec pointers.
* That's down in abd_alloc_chunks. We _could_ do it here in a single
* allocation, but it's fiddly and harder to read for no real gain.
*/
uint_t n = abd_iovcnt_for_bytes(size);
abd_t *abd = umem_alloc(sizeof (abd_t) + (n-1) * sizeof (struct iovec),
UMEM_NOFAIL);
ABD_SCATTER(abd).abd_offset = 0;
ABD_SCATTER(abd).abd_iovcnt = n;
return (abd);
}
void
abd_free_struct_impl(abd_t *abd)
{
/* For scatter, compute the extra amount we need to free */
uint_t iovcnt =
abd_is_linear(abd) || abd_is_gang(abd) ?
0 : (ABD_SCATTER(abd).abd_iovcnt - 1);
umem_free(abd, sizeof (abd_t) + iovcnt * sizeof (struct iovec));
}
void
abd_alloc_chunks(abd_t *abd, size_t size)
{
/*
* We've already allocated the iovec array; ensure that the wanted size
* actually matches, otherwise the caller has made a mistake somewhere.
*/
uint_t n = ABD_SCATTER(abd).abd_iovcnt;
ASSERT3U(n, ==, abd_iovcnt_for_bytes(size));
/*
* Allocate a ABD_PAGESIZE region for each iovec.
*/
struct iovec *iov = ABD_SCATTER(abd).abd_iov;
for (int i = 0; i < n; i++) {
iov[i].iov_base =
umem_alloc_aligned(ABD_PAGESIZE, ABD_PAGESIZE, UMEM_NOFAIL);
iov[i].iov_len = ABD_PAGESIZE;
}
}
void
abd_free_chunks(abd_t *abd)
{
uint_t n = ABD_SCATTER(abd).abd_iovcnt;
struct iovec *iov = ABD_SCATTER(abd).abd_iov;
for (int i = 0; i < n; i++)
umem_free_aligned(iov[i].iov_base, ABD_PAGESIZE);
}
boolean_t
abd_size_alloc_linear(size_t size)
{
return (size < ABD_SCATTER_MIN_SIZE);
}
void
abd_update_scatter_stats(abd_t *abd, abd_stats_op_t op)
{
ASSERT(op == ABDSTAT_INCR || op == ABDSTAT_DECR);
int waste = P2ROUNDUP(abd->abd_size, ABD_PAGESIZE) - abd->abd_size;
if (op == ABDSTAT_INCR) {
arc_space_consume(waste, ARC_SPACE_ABD_CHUNK_WASTE);
} else {
arc_space_return(waste, ARC_SPACE_ABD_CHUNK_WASTE);
}
}
void
abd_update_linear_stats(abd_t *abd, abd_stats_op_t op)
{
(void) abd;
(void) op;
ASSERT(op == ABDSTAT_INCR || op == ABDSTAT_DECR);
}
void
abd_verify_scatter(abd_t *abd)
{
#ifdef ZFS_DEBUG
/*
* scatter abds shall have:
* - at least one iovec
* - all iov_base point somewhere
* - all iov_len are ABD_PAGESIZE
* - offset set within the abd pages somewhere
*/
uint_t n = ABD_SCATTER(abd).abd_iovcnt;
ASSERT3U(n, >, 0);
uint_t len = 0;
for (int i = 0; i < n; i++) {
ASSERT3P(ABD_SCATTER(abd).abd_iov[i].iov_base, !=, NULL);
ASSERT3U(ABD_SCATTER(abd).abd_iov[i].iov_len, ==, ABD_PAGESIZE);
len += ABD_PAGESIZE;
}
ASSERT3U(ABD_SCATTER(abd).abd_offset, <, len);
#endif
}
void
abd_init(void)
{
/*
* Create the "zero" scatter abd. This is always the size of the
* largest possible block, but only actually has a single allocated
* page, which all iovecs in the abd point to.
*/
abd_zero_scatter = abd_alloc_struct(SPA_MAXBLOCKSIZE);
abd_zero_scatter->abd_flags |= ABD_FLAG_OWNER;
abd_zero_scatter->abd_size = SPA_MAXBLOCKSIZE;
void *zero =
umem_alloc_aligned(ABD_PAGESIZE, ABD_PAGESIZE, UMEM_NOFAIL);
memset(zero, 0, ABD_PAGESIZE);
uint_t n = abd_iovcnt_for_bytes(SPA_MAXBLOCKSIZE);
struct iovec *iov = ABD_SCATTER(abd_zero_scatter).abd_iov;
for (int i = 0; i < n; i++) {
iov[i].iov_base = zero;
iov[i].iov_len = ABD_PAGESIZE;
}
}
void
abd_fini(void)
{
umem_free_aligned(
ABD_SCATTER(abd_zero_scatter).abd_iov[0].iov_base, ABD_PAGESIZE);
abd_free_struct(abd_zero_scatter);
abd_zero_scatter = NULL;
}
void
abd_free_linear_page(abd_t *abd)
{
/*
* LINEAR_PAGE is specific to the Linux kernel; we never set this
* flag, so this will never be called.
*/
(void) abd;
PANIC("unreachable");
}
abd_t *
abd_alloc_for_io(size_t size, boolean_t is_metadata)
{
return (abd_alloc(size, is_metadata));
}
abd_t *
abd_get_offset_scatter(abd_t *dabd, abd_t *sabd, size_t off, size_t size)
{
/*
* Create a new scatter dabd by borrowing data pages from sabd to cover
* off+size.
*
* sabd is an existing scatter abd with a set of iovecs, each covering
* an ABD_PAGESIZE (4K) allocation. It's "zero" is at abd_offset.
*
* [........][........][........][........]
* ^- sabd_offset
*
* We want to produce a new abd, referencing those allocations at the
* given offset.
*
* [........][........][........][........]
* ^- dabd_offset = sabd_offset + off
* ^- dabd_offset + size
*
* In this example, dabd needs three iovecs. The first iovec is offset
* 0, so the final dabd_offset is masked back into the first iovec.
*
* [........][........][........]
* ^- dabd_offset
*/
size_t soff = ABD_SCATTER(sabd).abd_offset + off;
size_t doff = soff & ABD_PAGEMASK;
size_t iovcnt = abd_iovcnt_for_bytes(doff + size);
/*
* If the passed-in abd has enough allocated iovecs already, reuse it.
* Otherwise, make a new one. The caller will free the original if the
* one it gets back is not the same.
*
* Note that it's ok if we reuse an abd with more iovecs than we need.
* abd_size has the usable amount of data, and the abd does not own the
* pages referenced by the iovecs. At worst, they're holding dangling
* pointers that we'll never use anyway.
*/
if (dabd == NULL || ABD_SCATTER(dabd).abd_iovcnt < iovcnt)
dabd = abd_alloc_struct(iovcnt << ABD_PAGESHIFT);
/* Set offset into first page in view */
ABD_SCATTER(dabd).abd_offset = doff;
/* Copy the wanted iovecs from the source to the dest */
memcpy(&ABD_SCATTER(dabd).abd_iov[0],
&ABD_SCATTER(sabd).abd_iov[soff >> ABD_PAGESHIFT],
iovcnt * sizeof (struct iovec));
return (dabd);
}
void
abd_iter_init(struct abd_iter *aiter, abd_t *abd)
{
ASSERT(!abd_is_gang(abd));
abd_verify(abd);
memset(aiter, 0, sizeof (struct abd_iter));
aiter->iter_abd = abd;
}
boolean_t
abd_iter_at_end(struct abd_iter *aiter)
{
ASSERT3U(aiter->iter_pos, <=, aiter->iter_abd->abd_size);
return (aiter->iter_pos == aiter->iter_abd->abd_size);
}
void
abd_iter_advance(struct abd_iter *aiter, size_t amount)
{
ASSERT3P(aiter->iter_mapaddr, ==, NULL);
ASSERT0(aiter->iter_mapsize);
if (abd_iter_at_end(aiter))
return;
aiter->iter_pos += amount;
ASSERT3U(aiter->iter_pos, <=, aiter->iter_abd->abd_size);
}
void
abd_iter_map(struct abd_iter *aiter)
{
ASSERT3P(aiter->iter_mapaddr, ==, NULL);
ASSERT0(aiter->iter_mapsize);
if (abd_iter_at_end(aiter))
return;
if (abd_is_linear(aiter->iter_abd)) {
aiter->iter_mapaddr =
ABD_LINEAR_BUF(aiter->iter_abd) + aiter->iter_pos;
aiter->iter_mapsize =
aiter->iter_abd->abd_size - aiter->iter_pos;
return;
}
/*
* For scatter, we index into the appropriate iovec, and return the
* smaller of the amount requested, or up to the end of the page.
*/
size_t poff = aiter->iter_pos + ABD_SCATTER(aiter->iter_abd).abd_offset;
ASSERT3U(poff >> ABD_PAGESHIFT, <=,
ABD_SCATTER(aiter->iter_abd).abd_iovcnt);
struct iovec *iov = &ABD_SCATTER(aiter->iter_abd).
abd_iov[poff >> ABD_PAGESHIFT];
aiter->iter_mapsize = MIN(ABD_PAGESIZE - (poff & ABD_PAGEMASK),
aiter->iter_abd->abd_size - aiter->iter_pos);
ASSERT3U(aiter->iter_mapsize, <=, ABD_PAGESIZE);
aiter->iter_mapaddr = iov->iov_base + (poff & ABD_PAGEMASK);
}
void
abd_iter_unmap(struct abd_iter *aiter)
{
if (abd_iter_at_end(aiter))
return;
ASSERT3P(aiter->iter_mapaddr, !=, NULL);
ASSERT3U(aiter->iter_mapsize, >, 0);
aiter->iter_mapaddr = NULL;
aiter->iter_mapsize = 0;
}
void
abd_cache_reap_now(void)
{
}
Adding Direct IO Support Adding O_DIRECT support to ZFS to bypass the ARC for writes/reads. O_DIRECT support in ZFS will always ensure there is coherency between buffered and O_DIRECT IO requests. This ensures that all IO requests, whether buffered or direct, will see the same file contents at all times. Just as in other FS's , O_DIRECT does not imply O_SYNC. While data is written directly to VDEV disks, metadata will not be synced until the associated TXG is synced. For both O_DIRECT read and write request the offset and request sizes, at a minimum, must be PAGE_SIZE aligned. In the event they are not, then EINVAL is returned unless the direct property is set to always (see below). For O_DIRECT writes: The request also must be block aligned (recordsize) or the write request will take the normal (buffered) write path. In the event that request is block aligned and a cached copy of the buffer in the ARC, then it will be discarded from the ARC forcing all further reads to retrieve the data from disk. For O_DIRECT reads: The only alignment restrictions are PAGE_SIZE alignment. In the event that the requested data is in buffered (in the ARC) it will just be copied from the ARC into the user buffer. For both O_DIRECT writes and reads the O_DIRECT flag will be ignored in the event that file contents are mmap'ed. In this case, all requests that are at least PAGE_SIZE aligned will just fall back to the buffered paths. If the request however is not PAGE_SIZE aligned, EINVAL will be returned as always regardless if the file's contents are mmap'ed. Since O_DIRECT writes go through the normal ZIO pipeline, the following operations are supported just as with normal buffered writes: Checksum Compression Encryption Erasure Coding There is one caveat for the data integrity of O_DIRECT writes that is distinct for each of the OS's supported by ZFS. FreeBSD - FreeBSD is able to place user pages under write protection so any data in the user buffers and written directly down to the VDEV disks is guaranteed to not change. There is no concern with data integrity and O_DIRECT writes. Linux - Linux is not able to place anonymous user pages under write protection. Because of this, if the user decides to manipulate the page contents while the write operation is occurring, data integrity can not be guaranteed. However, there is a module parameter `zfs_vdev_direct_write_verify` that controls the if a O_DIRECT writes that can occur to a top-level VDEV before a checksum verify is run before the contents of the I/O buffer are committed to disk. In the event of a checksum verification failure the write will return EIO. The number of O_DIRECT write checksum verification errors can be observed by doing `zpool status -d`, which will list all verification errors that have occurred on a top-level VDEV. Along with `zpool status`, a ZED event will be issues as `dio_verify` when a checksum verification error occurs. ZVOLs and dedup is not currently supported with Direct I/O. A new dataset property `direct` has been added with the following 3 allowable values: disabled - Accepts O_DIRECT flag, but silently ignores it and treats the request as a buffered IO request. standard - Follows the alignment restrictions outlined above for write/read IO requests when the O_DIRECT flag is used. always - Treats every write/read IO request as though it passed O_DIRECT and will do O_DIRECT if the alignment restrictions are met otherwise will redirect through the ARC. This property will not allow a request to fail. There is also a module parameter zfs_dio_enabled that can be used to force all reads and writes through the ARC. By setting this module parameter to 0, it mimics as if the direct dataset property is set to disabled. Reviewed-by: Brian Behlendorf <behlendorf@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Atkinson <batkinson@lanl.gov> Co-authored-by: Mark Maybee <mark.maybee@delphix.com> Co-authored-by: Matt Macy <mmacy@FreeBSD.org> Co-authored-by: Brian Behlendorf <behlendorf@llnl.gov> Closes #10018
2024-09-14 23:47:59 +03:00
/*
* Borrow a raw buffer from an ABD without copying the contents of the ABD
* into the buffer. If the ABD is scattered, this will alloate a raw buffer
* whose contents are undefined. To copy over the existing data in the ABD, use
* abd_borrow_buf_copy() instead.
*/
void *
abd_borrow_buf(abd_t *abd, size_t n)
{
void *buf;
abd_verify(abd);
ASSERT3U(abd->abd_size, >=, 0);
if (abd_is_linear(abd)) {
buf = abd_to_buf(abd);
} else {
buf = zio_buf_alloc(n);
}
#ifdef ZFS_DEBUG
(void) zfs_refcount_add_many(&abd->abd_children, n, buf);
#endif
return (buf);
}
void *
abd_borrow_buf_copy(abd_t *abd, size_t n)
{
void *buf = abd_borrow_buf(abd, n);
if (!abd_is_linear(abd)) {
abd_copy_to_buf(buf, abd, n);
}
return (buf);
}
/*
* Return a borrowed raw buffer to an ABD. If the ABD is scattered, this will
* no change the contents of the ABD and will ASSERT that you didn't modify
* the buffer since it was borrowed. If you want any changes you made to buf to
* be copied back to abd, use abd_return_buf_copy() instead.
*/
void
abd_return_buf(abd_t *abd, void *buf, size_t n)
{
abd_verify(abd);
ASSERT3U(abd->abd_size, >=, n);
#ifdef ZFS_DEBUG
(void) zfs_refcount_remove_many(&abd->abd_children, n, buf);
#endif
if (abd_is_linear(abd)) {
ASSERT3P(buf, ==, abd_to_buf(abd));
} else {
ASSERT0(abd_cmp_buf(abd, buf, n));
zio_buf_free(buf, n);
}
}
void
abd_return_buf_copy(abd_t *abd, void *buf, size_t n)
{
if (!abd_is_linear(abd)) {
abd_copy_from_buf(abd, buf, n);
}
abd_return_buf(abd, buf, n);
}