This version includes both the AioContext lock and the block graph
lock, so there might be some deadlocks lurking. It's not possible to
disable the block graph lock like was done in QEMU 8.1, because there
are no changes like the function bdrv_schedule_unref() that require
it. QEMU 9.0 will finally get rid of the AioContext locking.
During live-restore with a VirtIO SCSI drive with iothread there is a
known racy deadlock related to the AioContext lock. Not new [1], but
not sure if more likely now. Should be fixed in QEMU 9.0.
The block graph lock comes with annotations that can be checked by
clang's TSA. This required changes to the block drivers, i.e.
alloc-track, pbs, zeroinit as well as taking the appropriate locks
in pve-backup, savevm-async, vma-reader.
Local variable shadowing is prohibited via a compiler flag now,
required slight adaptation in vma.c.
Major changes only affect alloc-track:
* It is not possible to call a generated co-wrapper like
bdrv_get_info() while holding the block graph lock exclusively [0],
which does happen during initialization of alloc-track when the
backing hd is set and the refresh_limits driver callback is invoked.
The bdrv_get_info() call to get the cluster size is moved to
directly after opening the file child in track_open().
The important thing is that at least the request alignment for the
write target is used, because then the RMW cycle in bdrv_pwritev
will gather enough data from the backing file. Partial cluster
allocations in the target are not a fundamental issue, because the
driver returns its allocation status based on the bitmap, so any
other data that maps to the same cluster will still be copied later
by a stream job (or during writes to that cluster).
* Replacing the node cannot be done in the
track_co_change_backing_file() callback, because it is a coroutine
and cannot hold the block graph lock exclusively. So it is moved to
the stream job itself with the auto-remove option not having an
effect anymore (qemu-server would always set it anyways).
In the future, there could either be a special option for the stream
job, or maybe the upcoming blockdev-replace QMP command can be used.
Replacing the backing child is actually already done in the stream
job, so no need to do it in the track_co_change_backing_file()
callback. It also cannot be called from a coroutine. Looking at the
implementation in the qcow2 driver, it doesn't seem to be intended
to change the backing child itself, just update driver-internal
state.
Other changes:
* alloc-track: Error out early when used without auto-remove. Since
replacing the node now happens in the stream job, where the option
cannot be read from (it's internal to the driver), it will always be
treated as 'on'. Makes sure to have users beside qemu-server notice
the change (should they even exist). The option can be fully dropped
in the future while adding a version guard in qemu-server.
* alloc-track: Avoid seemingly superfluous child permission update.
Doesn't seem necessary nowadays (maybe after commit "alloc-track:
fix deadlock during drop" where the dropping is not rescheduled and
delayed anymore or some upstream change). Replacing the block node
will already update the permissions of the new node (which was the
file child before). Should there really be some issue, instead of
having a drop state, this could also be just based off the fact
whether there is still a backing child.
Dumping the cumulative (shared) permissions for the BDS with a debug
print yields the same values after this patch and with QEMU 8.1,
namely 3 and 5.
* PBS block driver: compile unconditionally. Proxmox VE always needs
it and something in the build process changed to make it not enabled
by default. Probably would need to move the build option to meson
otherwise.
* backup: job unreferencing during cleanup needs to happen outside of
coroutine, so it was moved to before invoking the clean
* mirror: Cherry-pick stable fix to avoid potential deadlock.
* savevm-async: migrate_init now can fail, so propagate potential
error.
* savevm-async: compression counters are not accessible outside
migration/ram-compress now, so drop code that prophylactically set
it to zero.
[0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/
[1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Excerpt from Fiona's v3 cover-letter [0]:
When a backup for a VM is started, QEMU will install a
"copy-before-write" filter in its block layer. This filter ensures
that upon new guest writes, old data still needed for the backup is
sent to the backup target first. The guest write blocks until this
operation is finished so guest IO to not-yet-backed-up sectors will be
limited by the speed of the backup target.
With backup fleecing, such old data is cached in a fleecing image
rather than sent directly to the backup target. This can help guest IO
performance and even prevent hangs in certain scenarios, at the cost
of requiring more storage space.
With this series it will be possible to enable backup-fleecing via
e.g. `vzdump 123 --fleecing enabled=1,storage=local-lvm` with fleecing
images created on the storage `local-lvm`. The fleecing storage should
be a fast local storage which supports thin-provisioning and discard.
If the storage supports qcow2, that is used as the fleecing image
format. If the underlying file system does not support discard, with
qcow2 and preallocation=off, at least already allocated parts of the
image can be re-used later.
Fleecing images are created by qemu-server via pve-storage and
attached to QEMU before the backup starts, and cleaned up after the
backup finished or failed. The naming schema for fleecing images is
'vm-ID-fleece-N(.FORMAT)'. The allocated images are recorded in the
guest configuration, so that even after a hard failure, clean-up can
be re-attempted. While not too bad, it's a non-trivial amount of code
and I'm not 100% sure about the cost-benefit, so sending those as RFC.
The fleecing image needs to be the exact same size as the source, but
luckily, an explicit size can be specified when attaching a raw image
to QEMU so there are no size issues when using storages that have
coarser allocation/round up. For qcow2, it seems that virtual size can
be nearly arbitrary (i.e. modulo 512 byte granularity) during
allocation.
[0]: https://lists.proxmox.com/pipermail/pve-devel/2024-April/062815.html
Originally-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
With pvebackup_propagate_error(), the first error wins. When one job
in the transaction fails, it is expected that later jobs get the
ECANCELED error. Those are not interesting and by skipping them a more
interesting error, which is likely the actual root cause, can win.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
All callers of the function pass an address, so dereferencing once
before checking for NULL is required. It's also necessary to update
bytes and offset nevertheless, so the request will actually be aligned
later and not trigger an assertion failure.
Seems like this was accidentally broken in 8dca018 ("udpate and rebase
to QEMU v6.0.0") and this is effectively a revert to the original
version of the patch. The qiov functions changed back then, which
might've been the reason Stefan tried to simplify the patch.
Should fix live-import for certain kinds of VMDK images.
Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
In many configurations, e.g. multiple vNICs with multiple queues or
with many Ceph OSDs, the default soft limit of 1024 is not enough.
QEMU is supposed to work fine with file descriptors >= 1024 and does
not use select() on POSIX. Bump the soft limit to the allowed hard
limit to avoid issues with the aforementioned configurations.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Most notable fixes from a Proxmox VE perspective are:
* "virtio-net: correctly copy vnet header when flushing TX"
To prevent a stack overflow that could lead to leaking parts of the
QEMU process's memory.
* "hw/pflash: implement update buffer for block writes"
To prevent an edge case for half-completed writes. This potentially
affected EFI disks.
* Fixes to i386 emulation and ARM emulation.
No changes for patches were necessary (all are just automatic context
changes).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This reverts commit 6b7c1815e1.
The attempted fix has been reported to cause high CPU usage after
backup [0]. Not difficult to reproduce and it's iothreads getting
stuck in a loop. Downgrading to pve-qemu-kvm=8.1.2-4 helps which was
also verified by Christian, thanks! The issue this was supposed to fix
is much rarer, so revert for now, while upstream is still working on a
proper fix.
[0]: https://forum.proxmox.com/threads/138140/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
While the patch gives bdrv_graph_wrlock() as an example where the
issue can manifest, something similar can happen even when that is
disabled. Was able to reproduce the issue with
while true; do qm resize 115 scsi0 +4M; sleep 1; done
while running
fio --name=make-mirror-work --size=100M --direct=1 --rw=randwrite \
--bs=4k --ioengine=psync --numjobs=5 --runtime=1200 --time_based
in the VM.
Fix picked up from:
https://lists.nongnu.org/archive/html/qemu-devel/2023-12/msg01102.html
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
When using iothread, after commits
1665d9326f ("virtio-blk: implement BlockDevOps->drained_begin()")
766aa2de0f ("virtio-scsi: implement BlockDevOps->drained_begin()")
it can happen that polling gets stuck when draining. This would cause
IO in the guest to get completely stuck.
A workaround for users is stopping and resuming the vCPUs because that
would also stop and resume the dataplanes which would kick the host
notifiers.
This can happen with block jobs like backup and drive mirror as well
as with hotplug [2].
Reports in the community forum that might be about this issue[0][1]
and there is also one in the enterprise support channel.
As a workaround in the code, just re-enable notifications and kick the
virt queue after draining. Draining is already costly and rare, so no
need to worry about a performance penalty here. This was taken from
the following comment of a QEMU developer [3] (in my debugging,
I had already found re-enabling notification to work around the issue,
but also kicking the queue is more complete).
[0]: https://forum.proxmox.com/threads/137286/
[1]: https://forum.proxmox.com/threads/137536/
[2]: https://issues.redhat.com/browse/RHEL-3934
[3]: https://issues.redhat.com/browse/RHEL-3934?focusedId=23562096&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#comment-23562096
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The implementation of the helper is_path_tmpfs() is similar to the
existing qemu_fd_getfs() function in util/mmap-alloc.c, which
unfortunately only takes an existing fd.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Bigger notable changes:
* Commit 1a30b0f5d7 ("block: .bdrv_open is non-coroutine and
unlocked") broke the PVE backup patches, in particular setting up
the backup dump block driver, because bdrv_new_open_driver() cannot
be called from a coroutine. To fix it, bdrv_co_open() is used
instead, and while it's a much more involved function, the result
should be essentially the same. The only difference I noticed is
that the BDRV_O_ALLOW_RDWR flag is also set in the resulting bds
(block driver state), but that shouldn't hurt.
Smaller notable changes:
* aio_set_fd_handler() dropped its 'is_external' parameter stating
that all callers now pass false in 60f782b6b7 ("aio: remove
aio_disable_external() API"). The calls in the PVE patches also
passed false, so just drop the parameter too.
* global_state_store() does not have a return value anymore, so the
user in the PVE savevm-async patch was adapted. For context, see
c33f1829f8 ("migration: never fail in global_state_store()").
* Renames affecting the PVE savevm-async patch:
migrate_use_block() -> migrate_block() and ram_counters -> mig_stats
9d4b1e5f22 ("migration: Move migrate_use_block() to options.c")
aff3f6606d ("migration: Rename ram_counters to mig_stats")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since upstream QEMU 8.0, it's no longer possible to call
bdrv_img_create() from a coroutine anymore, meaning a backup with the
directory format would crash the QEMU instance.
The feature is only exposed via the monitor and was intended to be
experimental. There were no user reports about the breakage and it
only was noticed during the rebase for QEMU 8.1, because other parts
of the backup code needed adaptation and I decided to check the
BACKUP_FORMAT_DIR case too.
It should not stay in a broken state of course, but avoid the
maintenance cost and just make it a removed feature for Proxmox VE 8
retroactively.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
With the drive-backup QMP command, upstream QEMU uses a drained
section for the source drive when creating the backup job. Do the same
here to avoid subtle bugs.
There, the drained section extends until after the job is started, but
this cannot be done here for multi-disk backups (could at most start
the first job). The important thing is that the cbw
(copy-before-write) node is in place and the bcs (block-copy-state)
bitmap is initialized, which both happen during job creation (ensured
by the "block/backup: move bcs bitmap initialization to job creation"
PVE patch).
One such bug is one reported in the community forum [0], where using a
drive with iothread can lead to an overlapping block-copy request and
consequently an assertion failure. The block-copy code relies on the
bcs bitmap to determine if a request for a certain range can be
created. Each time a request is created, it resets the bcs bitmap at
that range to indicate that it's being handled.
The duplicate request can happen as follows:
Thread A attaches the cbw node
Thread B creates a request and resets the bitmap at that range
Thread A clears the bitmap and merges it with the PBS bitmap
The merging can lead to the bitmap being set again at the range of
the previous request, so the block-copy code thinks it's fine to
create a request there.
Thread B creates another requests at an overlapping range before the
other request is finished.
The drained section ensures that nothing else can interfere with the
bcs bitmap between attaching the copy-before-write block node and
initialization of the bitmap.
[0]: https://forum.proxmox.com/threads/133149/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Add a filter to the "vma extract" command. A comma seperated list of
disk images that should be extracted can be passed with the "-d" option.
Example to extract an IDE drive and an SCSI drive from vzdump.vma:
vma extract vzdump.vma -d "drive-ide0,drive-scsi0" extractdir
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
Reported in the community forum [0]. By default, there can be large
amounts of memory left assigned to the QEMU process after backup.
Likely because of fragmentation, it's necessary to explicitly call
malloc_trim() to tell glibc that it shouldn't keep all that memory
resident for the process.
QEMU itself already does a malloc_trim() in the RCU thread, but that
code path might not be reached (or not for a long time) under usual
operation. The value of 4 MiB for the argument was also copied from
there.
Example with the following configuration:
> agent: 1
> boot: order=scsi0
> cores: 4
> cpu: x86-64-v2-AES
> ide2: none,media=cdrom
> memory: 1024
> name: backup-mem
> net0: virtio=DA:58:18:26:59:9F,bridge=vmbr0,firewall=1
> numa: 0
> ostype: l26
> scsi0: rbd:base-107-disk-0/vm-106-disk-1,size=4302M
> scsihw: virtio-scsi-pci
> smbios1: uuid=b2d4511e-8d01-44f1-afd6-9581b30c24a6
> sockets: 2
> startup: order=2
> virtio0: lvmthin:vm-106-disk-1,iothread=1,size=1G
> virtio1: lvmthin:vm-106-disk-2,iothread=1,size=1G
> virtio2: lvmthin:vm-106-disk-3,iothread=1,size=1G
> vmgenid: 0a1d8751-5e02-449d-977e-c0160e900231
Before the change:
> root@pve8a1 ~ # grep VmRSS /proc/$(cat /var/run/qemu-server/106.pid)/status
> VmRSS: 370948 kB
> root@pve8a1 ~ # vzdump 106 --storage pbs
> (...)
> INFO: Backup job finished successfully
> root@pve8a1 ~ # grep VmRSS /proc/$(cat /var/run/qemu-server/106.pid)/status
> VmRSS: 2114964 kB
After the change:
> root@pve8a1 ~ # grep VmRSS /proc/$(cat /var/run/qemu-server/106.pid)/status
> VmRSS: 398788 kB
> root@pve8a1 ~ # vzdump 106 --storage pbs
> (...)
> INFO: Backup job finished successfully
> root@pve8a1 ~ # grep VmRSS /proc/$(cat /var/run/qemu-server/106.pid)/status
> VmRSS: 424356 kB
[0]: https://forum.proxmox.com/threads/131339/
Co-diagnosed-by: Friedrich Weber <f.weber@proxmox.com>
Co-diagnosed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Add format attributes to functions that take printf-like arguments. This
provides additional compile-time checking that the correct parameters
are passed to the functions.
This fixes compiler warnings generated by the -Wsuggest-attribute=format
flag.
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
Not difficult to run into, just have a drive with iothread, take a PBS
backup and then take a snapshot or hibernate. Resuming will fail with
> qemu: qemu_mutex_unlock_impl: Operation not permitted
because of not acquiring the correct AioContext first.
Migration is not affected, because it runs in coroutine context.
Reported in the community forum:
https://forum.proxmox.com/threads/129899/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The QAPI change for QEMU 8.0 dropped redundant has_foo parameters, but
in the blockdev_mirror_common() function (which is not part of the
QAPI itself but called from there) the argument pair was has_bitmap
and bitmap_name rather than has_bitmap and bitmap.
Reported-by: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
where there is no good reason to keep them separate. It's a pain
during rebase if there are multiple patches changing the same code
over and over again. This was especially bad for the backup-related
patches. If the history of patches really is needed, it can be
extracted via git. Additionally, compilation with partial application
of patches was broken since a long time, because one of the master key
changes became part of an earlier patch during a past rebase.
If only the same files were changed by a subsequent patch and the
changes felt to belong together (obvious for later bug fixes, but also
done for features e.g. adding master key support for PBS), the patches
were squashed together.
The PBS namespace support patch was split into the individual parts
it changes, i.e. PBS block driver, pbs-restore binary and QMP backup
infrastructure, and squashed into the respective patches.
No code change is intended, git diff in the submodule should not show
any difference between applying all patches before this commit and
applying all patches after this commit.
The query-proxmox-support QMP function has been left as part of the
"PVE-Backup: Proxmox backup patches for QEMU" patch, because it's
currently only used there. If it ever is used elsewhere too, it can
be split out from there.
The recent alloc-track and BQL-related savevm-async changes have been
left separate for now, because it's not 100% clear they are the best
approach yet. This depends on what upstream decides about the BQL
stuff and whether and what kind of issues with the changes pop up.
The qemu-img dd snapshot patch has been re-ordered to after the other
qemu-img dd patches.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Namely, pvebackup_co_prepare() needs to call bdrv_co_open() rather
than bdrv_open(), because it is a coroutine itself.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Changes to other patches are all just metadata/context changes except
for pvebackup_co_prepare() needing to call bdrv_co_unref() rather than
bdrv_unref(), because it is a coroutine itself. This is documented in
d6ee2e324e ("block-coroutine-wrapper: Introduce no_co_wrapper"). The
change is necessary, because one of the stable fixes converts
bdrv_unref and blk_unref into no_co_wrappers (in preparation for a
second patch to fix a hang with the block resize QMP command).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Many changes were necessary this time around:
* QAPI was changed to avoid redundant has_* variables, see commit
44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C")
for details. This affected many QMP commands added by Proxmox too.
* Pending querying for migration got split into two functions, one to
estimate, one for exact value, see commit c8df4a7aef ("migration:
Split save_live_pending() into state_pending_*") for details. Relevant
for savevm-async and PBS dirty bitmap.
* Some block (driver) functions got converted to coroutines, so the
Proxmox block drivers needed to be adapted.
* Alloc track auto-detaching during PBS live restore got broken by
AioContext-related changes resulting in a deadlock. The current, hacky
method was replaced by a simpler one. Stefan apparently ran into a
problem with that when he wrote the driver, but there were
improvements in the stream job code since then and I didn't manage to
reproduce the issue. It's a separate patch "alloc-track: fix deadlock
during drop" for now, you can find the details there.
* Async snapshot-related changes:
- The pending querying got adapted to the above-mentioned split and
a patch is added to optimize it/make it more similar to what
upstream code does.
- Added initialization of the compression counters (for
future-proofing).
- It's necessary the hold the BQL (big QEMU lock = iothread mutex)
during the setup phase, because block layer functions are used there
and not doing so leads to racy, hard-to-debug crashes or hangs. It's
necessary to change some upstream code too for this, a version of
the patch "migration: for snapshots, hold the BQL during setup
callbacks" is intended to be upstreamed.
- Need to take the bdrv graph read lock before flushing.
* hmp_info_balloon was moved to a different file.
* Needed to include a new headers from time to time to still get the
correct functions.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
In qemu-server, we already allocate 2 * $mem_size + 500 MiB for driver
state (which was 32 MiB long ago according to git history). It seems
likely that the 30 MiB cutoff in the savevm-async implementation was
chosen based on that.
In bug #4476 [0], another issue caused the iteration to not make any
progress and the state file filled up all the way to the 30 MiB +
pending_size cutoff. Since the guest is not stopped immediately after
the check, it can still dirty some RAM and the current cutoff is not
enough for a reproducer VM (was done while bug #4476 still was not
fixed), dirtying memory with
> stress-ng -B 2 --bigheap-growth 64.0M'
After entering the final stage, savevm actually filled up the state
file completely, leading to an I/O error. It's probably the same
scenario as reported in the bug report, the error message was fixed in
commit a020815 ("savevm-async: fix function name in error message")
after the bug report.
If not for the bug, the cutoff will only be reached by a VM that's
dirtying RAM faster than can be written to the storage, so increase
the cutoff to 100 MiB to have a bigger chance to finish successfully,
while still trying to not increase downtime too much for
non-hibernation snapshots.
[0]: https://bugzilla.proxmox.com/show_bug.cgi?id=4476
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
when pend_postcopy is large. By definition, pend_postcopy won't
decrease when iterating, so a value larger than the cutoff of 400000
would lead to essentially empty iterations, filling up the state file
until only 30 MiB + pending_size remain and the second half of the
check would trigger.
Avoid this, by not considering pend_postcopy for the cutoff to enter
the final phase.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Avoids a patch and is required to compile when not all patches are
applied. No functional change is intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
User-facing breaking change:
The slirp submodule for user networking got removed. It would be
necessary to add the --enable-slirp option to the build and/or install
the appropriate library to continue building it. Since PVE is not
explicitly supporting it, it would require additionally installing the
libslirp0 package on all installations and there is *very* little
mention on the community forum when searching for "slirp" or
"netdev user", the plan is to only enable it again if there is some
real demand for it.
Notable changes:
* The big change for this release is the rework of job locking, using
a job mutex and introducing _locked() variants of job API functions
moving away from call-side AioContext locking. See (in the qemu
submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and
remove Aiocontext locks") and previous commits for context.
Changes required for the backup patches:
* Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job
API functions where appropriate (many are only availalbe as
a _locked() variant).
* Remove acquiring/releasing AioContext around functions taking the
job mutex lock internally.
The patch introducing sequential transaction support for jobs needs
to temporarily unlock the job mutex to call job_start() when
starting the next job in the transaction.
* The zeroinit block driver now marks its child as primary.
The documentation in include/block/block-common.h states:
> Filter node has exactly one FILTERED|PRIMARY child, and may have
> other children which must not have these bits
Without this, an assert will trigger when copying to a zeroinit target
with qemu-img convert, because bdrv_child_cb_attach() expects any
non-PRIMARY child to be not FILTERED:
> qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw
> qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion
> `!(child->role & BDRV_CHILD_FILTERED)' failed.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The documentation in include/io/channel.h states that -1 or
QIO_CHANNEL_ERR_BLOCK should be returned upon error. Simply passing
along the return value from the blk-functions has the potential to
confuse the call sides. Non-blocking mode is not implemented
currently, so -1 it is.
The "return ret" was mistakenly left over from the previous
QEMUFileOps based implementation. Also, use error_setg_errno(), since
the blk(_co)_p{readv,writev} functions return errno codes.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
to be in-line with what other implementations in QEMU do. Commit
1d39c7098bbfa6862cb96066c4f8f6735ea397c5 mentions the EIO bit and
the function is expected to return 0 upon success (see other
implementations).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Notable changes:
* The only big change is the switch to using a custom QIOChannel for
savevm-async, because the previously used QEMUFileOps was dropped.
Changes to the current implementation:
* Switch to vector based methods as required for an IO channel. For
short reads the passed-in IO vector is stuffed with zeroes at the
end, just to be sure.
* For reading: The documentation in include/io/channel.h states that
at least one byte should be read, so also error out when whe are
at the very end instead of returning 0.
* For reading: Fix off-by-one error when request goes beyond end.
The wrong code piece was:
if ((pos + size) > maxlen) {
size = maxlen - pos - 1;
}
Previously, the last byte would not be read. It's actually
possible to get a snapshot .raw file that has content all the way
up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any
trailing zero bytes (I wrote a script to do it).
Luckily, it didn't cause a real issue, because qemu_loadvm_state()
is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION)
section. The buffer for reading it is simply freed up afterwards
and the function will assume that it read the whole section, even
if that's not the case.
* For writing: Make use of the generated blk_pwritev() wrapper
instead of manually wrapping the coroutine to simplify and save a
few lines.
* Adapt to changed interfaces for blk_{pread,pwrite}:
* a9262f551e ("block: Change blk_{pread,pwrite}() param order")
* 3b35d4542c ("block: Add a 'flags' param to blk_pread()")
* bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success")
Those changes especially affected the qemu-img dd patches, because
the context also changed, but also some of our block drivers used
the functions.
* Drop qemu-common.h include: it got renamed after essentially
everything was moved to other headers. The only remaining user I
could find for things dropped from the header between 7.0 and 7.1
was qemu_get_vm_name() in the iscsi-initiatorname patch, but it
already includes the header to which the function was moved.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Without this change, it's necessary to send a second savevm-end QMP
command after aborting a snaphsot, before a new savevm-start QMP
command can succeed.
In process_savevm_finalize(), no longer set an error in the abort
scenario. If there already is another error, there's no need to
override it. If canceling was done intentionally, qmp_savevm_end()
is responsible for setting the state now.
Reported-by: Mira Limbeck <m.limbeck@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reported in the community forum[0].
For 6.1.0, there were a few changes to the coroutine-sleep API, but
the adaptations in f376b2b ("update and rebase to QEMU v6.1.0") made
a mistake.
Currently, target_close_wait is NULL when passed to
qemu_co_sleep_ns_wakeable(), which further passes it to
qemu_co_sleep(), but there, it is dereferenced when trying to access
the 'to_wake' member:
> Thread 1 "kvm" received signal SIGSEGV, Segmentation fault.
> qemu_co_sleep (w=0x0) at ../util/qemu-coroutine-sleep.c:57
To fix it, create a proper struct and pass its address instead. Also
call qemu_co_sleep_wake unconditionally, because the NULL check (for
the 'to_wake' member) is done inside the function itself.
This patch is based on what the QEMU commits introducing the changes
to the coroutine-sleep API did to the callers in QEMU:
eaee072085 ("coroutine-sleep: allow qemu_co_sleep_wake that wakes nothing")
29a6ea24eb ("coroutine-sleep: replace QemuCoSleepState pointer with struct in the API")
[0]: https://forum.proxmox.com/threads/112130/
Tested-by: Mira Limbeck <m.limbeck@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Only very minor changes needed:
* Most patches in extra (or some version of them) are part of 7.0.0.
* aio_set_fd_handler got an extra parameter, but can just pass NULL
like we did for the related 'poll' parameter. See QEMU commit
826cc32423db2a99d184dbf4f507c737d7e7a4ae for more.
* Add include for qemu/memalign.h in vma.c and vma-writer.c.
* Add reverts for fixups of already reverted 0347a8fd4c ("block/rbd:
implement bdrv_co_block_status") that came in with 7.0.0. Those
fixups are not enough, see Proxmox bugzilla #4047.
* Two trivial context changes for bitmap-mirror patches.
* block_int.h got split up into multiple headers.
* Some context changes in configure and meson.build.
* Used the oppurtunity to squash fixup of bdrv_backuo_dump_create typo
in a later patch into the patch introducing the function (had to
move code to new header during rebase).
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
