Introduce a new map line for skipping a certain drive, of the form
skip=drive-scsi0
Since in PVE, most archives are compressed and piped to vma for
restore, it's not easily possible to skip reads.
For the reader, a new skip flag for VmaRestoreState is added and the
target is allowed to be NULL if skip is specified when registering.
If
the skip flag is set, no writes will be made as well as no check for
duplicate clusters. Therefore, the flag is not set for verify.
Originally-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is necessary for multi-disk backups where not all jobs are
immediately started after they are created. QEMU commit
06e0a9c16405c0a4c1eca33cf286cc04c42066a2 did already part of the work,
ensuring that new writes after job creation don't pass through to the
backup, but not yet for the MIRROR_SYNC_MODE_BITMAP case which is used
for PBS.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Notable changes:
* bdrv_co_p{discard,readv,writev,write_zeroes} function signatures
changed, to using int64_t for offsets/bytes and some still had int
rather than BrdvRequestFlags for the flags.
* job_cancel_sync now has a force parameter. Commit messages in
73895f3838cd7fdaf185cf1dbc47be58844a966f
4cfb3f05627ad82af473e7f7ae113c3884cd04e3
sound like using force=true makes more sense.
* Added 3 patches coming in via qemu-stable tag, most important one is
to work around a librbd issue.
* Added another 3 patches from qemu-devel to fix issue leading to
crash when live migrating with iothread.
* cluster_size calculation helper changed (see patch pve/0026).
* QAPI's if conditionals now use 'CONFIG_FOO' rather than
'defined(CONFIG_FOO)'
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
which fixes the bad commit 18473467d55a20d643b6c9b3a52de42f705b4d35
that was tracked down via bisecting, and has a Cc for qemu-stable as
well.
Issue was easy enough to reproduce with a single virtio-block disk
using a few runs of dd if=/dev/urandom of=file bs=1M count=1000
Commit cc071629539dc1f303175a7e2d4ab854c0a8b20f upstream.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Very clean rebase, only the +pve version handling needed manual fixing.
Drops two applied patches from extra/ and adds one new from upstream
(extra/0001*, fixes VNC over unix sockets) as well as 3 of my own for
allowing password changes on custom VNC displays again (as seen and
reviewed upstream, but not yet applied).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
same as the initial version sent to qemu-devel, it won't be the final
fix we plan to upstream but it should be enough band-aid to
workaround how PVE uses the QMP.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[ Thomas: add a bit reasoning to commit message body ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This drops debian/patches/pve/0005-PVE-Config-smm_available-false.patch
(and renumbers the remaining patches)
From what I could gather, this patch was originally added
due to issues with old kernels. Now we have users which
seem to run into issues *with* the patch.
All this does is toggle an option, and it's available via a
qemu CLI option anyway, so if dropping this patch causes
issues for some people we can just add an option to
qemu-server & UI control smm explicitly.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Alexandre Derumier <aderumier@odiso.com>
Tested-by: Stefan Reiter <s.reiter@proxmox.com>
Linux SCSI can throw spurious -EAGAIN in some corner cases in its
completion path, which will end up being the result in the completed
io_uring request.
Resubmitting such requests should allow block jobs to complete, even
if such spurious errors are encountered.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Mostly minor changes, bigger ones summarized:
* QEMU's internal backup code now uses a new async system, which allows
parallel requests - the default max_workers settings is 64, I chose
less, since 64 put enough stress on QEMU that the guest became
practically unusable during the backup, and 16 still shows quite a
nice measureable performance improvement. Little code changes for us
though.
* 'malformed' QAPI parameters/functions are now a build error (i.e.
using '_' vs '-'), I chose to just whitelist our calls in the name of
backwards compatibility.
* monitor OOB race fix now uses the upstream variant, cherry-picked from
origin/master since it's not in 6.0 by default
* last patch fixes a bug with snapshot rollback related to the new yank
system
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
cherry-picked cleanly from 6.0 development tree, fixes an issue with
resizing RBD drives (and reportedly also on krbd or potentially other
storage backends) with iothreads.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
See added patches for more info, overview:
0044: slightly increase PBS performance by reducing allocations
0045: slightly increase block-stream performance for Ceph
0046: don't crash with block-stream on RBD
0047: add alloc-track driver for live restore
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...instead of having them in the middle of the backup related patches.
These might (hopefully) become upstream at some point as well.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Lots of patches touched and some slight changes to the build process
since QEMU switched to meson as their build system. Functionality-wise
very little rebasing required.
New patches introduced:
* pve/0058: to fix VMA backups and clean up some code in general with
new 5.2 features now available to us (namely coroutine-enabled QMP).
* extra/0002: don't build man pages for guest agent when disabled
* extra/0003: fix live-migration with hugepages
* 0017 and 0018 are adjusted to fix snapshot abort and improve
snap performance a bit
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Fixes vma restore when the target is an iSCSI storage which expects that
initiatorname. Also avoids the need to always explicitly set the initiatorname
in PVE code, thus fixing moving efidisks from and to such iSCSI storages.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
With the transaction patches, patch 0026-PVE-Backup-modify-job-api.patch
is no longer necessary, so drop it and rebase all following patches on
top.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Prints QEMU errors that occur *after* the "-daemonize" fork to the
systemd journal, instead of pushing them into /dev/null like before.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
No major semantic changes, mostly just deprecations and changed function
signatures. Drop the extra/ patches, as they have been applied upstream.
The added extra/ patch was accepted upstream[0] but has not been picked
up for 5.1. It is required for non-4M aligned backups to work with PBS.
[0] https://lists.gnu.org/archive/html/qemu-devel/2020-08/msg01671.html
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
fixes an assertion failure in qemu network packet processing, which can
lead to DOS'ing the qemu process on the host. this affects 'e1000e' and
'vmxnet3' network devices.
patch is cherry-picked from the commit mentioned in the oss-security email.
more info on oss-security [0]
[0]: https://www.openwall.com/lists/oss-security/2020/08/10/1
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
* rename "incremental" param to "use-dirty-bitmap", avoids confusion
as the backup can be incrementally also with that param set to
false.
* use new proxmox_backup_check_incremental
* fix setting dirty counter and adapt to new connect API semantic
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Move qemu_savevm_state_{header,setup} into the main loop and
the rest of the iteration into a coroutine. The former need
to lock the iothread (and we can't unlock it in the
coroutine), and the latter can't deal with being in a
separate thread, so a coroutine it must be.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
