Without this change, it's necessary to send a second savevm-end QMP
command after aborting a snaphsot, before a new savevm-start QMP
command can succeed.
In process_savevm_finalize(), no longer set an error in the abort
scenario. If there already is another error, there's no need to
override it. If canceling was done intentionally, qmp_savevm_end()
is responsible for setting the state now.
Reported-by: Mira Limbeck <m.limbeck@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reported in the community forum[0].
For 6.1.0, there were a few changes to the coroutine-sleep API, but
the adaptations in f376b2b ("update and rebase to QEMU v6.1.0") made
a mistake.
Currently, target_close_wait is NULL when passed to
qemu_co_sleep_ns_wakeable(), which further passes it to
qemu_co_sleep(), but there, it is dereferenced when trying to access
the 'to_wake' member:
> Thread 1 "kvm" received signal SIGSEGV, Segmentation fault.
> qemu_co_sleep (w=0x0) at ../util/qemu-coroutine-sleep.c:57
To fix it, create a proper struct and pass its address instead. Also
call qemu_co_sleep_wake unconditionally, because the NULL check (for
the 'to_wake' member) is done inside the function itself.
This patch is based on what the QEMU commits introducing the changes
to the coroutine-sleep API did to the callers in QEMU:
eaee072085 ("coroutine-sleep: allow qemu_co_sleep_wake that wakes nothing")
29a6ea24eb ("coroutine-sleep: replace QemuCoSleepState pointer with struct in the API")
[0]: https://forum.proxmox.com/threads/112130/
Tested-by: Mira Limbeck <m.limbeck@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
For the io_uring patch, it's not very clear which configurations can
trigger it, but it should be rather uncommon. See qemu commit
be6a166fde652589761cf70471bcde623e9bd72a for a bit more information.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
coming in via qemu-stable (except for the vdmk fix, which was tagged
for-7.0 on the qemu-devel list, but didn't make it into the release).
Also took the chance to switch the gluster fix to the version that
made it into upstream.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Only very minor changes needed:
* Most patches in extra (or some version of them) are part of 7.0.0.
* aio_set_fd_handler got an extra parameter, but can just pass NULL
like we did for the related 'poll' parameter. See QEMU commit
826cc32423db2a99d184dbf4f507c737d7e7a4ae for more.
* Add include for qemu/memalign.h in vma.c and vma-writer.c.
* Add reverts for fixups of already reverted 0347a8fd4c ("block/rbd:
implement bdrv_co_block_status") that came in with 7.0.0. Those
fixups are not enough, see Proxmox bugzilla #4047.
* Two trivial context changes for bitmap-mirror patches.
* block_int.h got split up into multiple headers.
* Some context changes in configure and meson.build.
* Used the oppurtunity to squash fixup of bdrv_backuo_dump_create typo
in a later patch into the patch introducing the function (had to
move code to new header during rebase).
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Introduce a new map line for skipping a certain drive, of the form
skip=drive-scsi0
Since in PVE, most archives are compressed and piped to vma for
restore, it's not easily possible to skip reads.
For the reader, a new skip flag for VmaRestoreState is added and the
target is allowed to be NULL if skip is specified when registering.
If
the skip flag is set, no writes will be made as well as no check for
duplicate clusters. Therefore, the flag is not set for verify.
Originally-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is necessary for multi-disk backups where not all jobs are
immediately started after they are created. QEMU commit
06e0a9c16405c0a4c1eca33cf286cc04c42066a2 did already part of the work,
ensuring that new writes after job creation don't pass through to the
backup, but not yet for the MIRROR_SYNC_MODE_BITMAP case which is used
for PBS.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Notable changes:
* bdrv_co_p{discard,readv,writev,write_zeroes} function signatures
changed, to using int64_t for offsets/bytes and some still had int
rather than BrdvRequestFlags for the flags.
* job_cancel_sync now has a force parameter. Commit messages in
73895f3838cd7fdaf185cf1dbc47be58844a966f
4cfb3f05627ad82af473e7f7ae113c3884cd04e3
sound like using force=true makes more sense.
* Added 3 patches coming in via qemu-stable tag, most important one is
to work around a librbd issue.
* Added another 3 patches from qemu-devel to fix issue leading to
crash when live migrating with iothread.
* cluster_size calculation helper changed (see patch pve/0026).
* QAPI's if conditionals now use 'CONFIG_FOO' rather than
'defined(CONFIG_FOO)'
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Otherwise, the header might already get written by a coroutine and
registering further streams will fail after that.
Also adds a missing g_list_free call for the other GList that's used.
Reported in the community forum:
https://forum.proxmox.com/threads/104744/
Reproducer script (increase beyond 30 if the issue isn't triggered yet):
> #!/usr/bin/perl
>
> my $dir = "./vma-create-bug";
> mkdir $dir;
>
> my $archive_path = "$dir/vzdump-qemu-104-2202_02_02-00_00_00.vma";
> unlink $archive_path;
>
> my $cmd = "vma create $archive_path -v";
> for (my $i = 0; $i < 30; $i++) {
> system("truncate -s 1M $dir/drive-virtio$i.img");
> $cmd .= " drive-virtio$i=$dir/drive-virtio$i.img";
> }
> system($cmd);
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
which fixes the bad commit 18473467d55a20d643b6c9b3a52de42f705b4d35
that was tracked down via bisecting, and has a Cc for qemu-stable as
well.
Issue was easy enough to reproduce with a single virtio-block disk
using a few runs of dd if=/dev/urandom of=file bs=1M count=1000
Commit cc071629539dc1f303175a7e2d4ab854c0a8b20f upstream.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
both of them depend on generated header files, so we have to specify
them as sources. Otherwise, it happens (at least on some machines)
that they will be compiled before the headers are generated, aborting
the build.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
libguestfs starts their helper VMs with `-machine accel=..` without a
machine type, and our pve version suffix handling would segfault in that
case. there might be other scripted use cases that are affected as well.
this regression was introduced with the rebase of our patch set on top
of 6.1.0
Fixes: f376b2b9e2
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Very clean rebase, only the +pve version handling needed manual fixing.
Drops two applied patches from extra/ and adds one new from upstream
(extra/0001*, fixes VNC over unix sockets) as well as 3 of my own for
allowing password changes on custom VNC displays again (as seen and
reviewed upstream, but not yet applied).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
same as the initial version sent to qemu-devel, it won't be the final
fix we plan to upstream but it should be enough band-aid to
workaround how PVE uses the QMP.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[ Thomas: add a bit reasoning to commit message body ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This drops debian/patches/pve/0005-PVE-Config-smm_available-false.patch
(and renumbers the remaining patches)
From what I could gather, this patch was originally added
due to issues with old kernels. Now we have users which
seem to run into issues *with* the patch.
All this does is toggle an option, and it's available via a
qemu CLI option anyway, so if dropping this patch causes
issues for some people we can just add an option to
qemu-server & UI control smm explicitly.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Alexandre Derumier <aderumier@odiso.com>
Tested-by: Stefan Reiter <s.reiter@proxmox.com>
Linux SCSI can throw spurious -EAGAIN in some corner cases in its
completion path, which will end up being the result in the completed
io_uring request.
Resubmitting such requests should allow block jobs to complete, even
if such spurious errors are encountered.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Mostly minor changes, bigger ones summarized:
* QEMU's internal backup code now uses a new async system, which allows
parallel requests - the default max_workers settings is 64, I chose
less, since 64 put enough stress on QEMU that the guest became
practically unusable during the backup, and 16 still shows quite a
nice measureable performance improvement. Little code changes for us
though.
* 'malformed' QAPI parameters/functions are now a build error (i.e.
using '_' vs '-'), I chose to just whitelist our calls in the name of
backwards compatibility.
* monitor OOB race fix now uses the upstream variant, cherry-picked from
origin/master since it's not in 6.0 by default
* last patch fixes a bug with snapshot rollback related to the new yank
system
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
ran into this when live-restoring a backup configured for IO-threads,
got the good ol':
> qemu: qemu_mutex_unlock_impl: Operation not permitted
error.
Checking out the history of the related bdrv_backup_top_drop(*bs)
method, we can see that it used to do the AIO context acquiring too,
but in the backup path this was problematic and was changed to be
higher up in the call path in a upstream series from Stefan[0].
That said, this is a completely different code path and it is safe to
do so here. We always run from the main threads's AIO context here
and we call it only indirectly once, guarded by checking for
`s->drop_state == DropNone` and set `s->drop_state = DropRequested`
shortly before we schedule the track_drop() in a bh.
[0]: https://lists.gnu.org/archive/html/qemu-devel/2020-03/msg09139.html
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reads just nicer with a drain begin *and* end call. Also clearing the
backing link of the alloc track BDS makes it closer to
bdrv_backup_top_drop() with which this driver has a bit in common.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
cherry-picked cleanly from 6.0 development tree, fixes an issue with
resizing RBD drives (and reportedly also on krbd or potentially other
storage backends) with iothreads.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
See added patches for more info, overview:
0044: slightly increase PBS performance by reducing allocations
0045: slightly increase block-stream performance for Ceph
0046: don't crash with block-stream on RBD
0047: add alloc-track driver for live restore
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Saving dirty bitmaps from our savevm-async code didn't work, since we
use a coroutine which holds the iothread mutex already (upstream savevm
is sync, migration uses a thread). Release the mutex before calling the
one function that (according to it's documentation) requires the lock to
*not* be held: qemu_savevm_state_pending.
Additionally, loading dirty bitmaps requires a call to
dirty_bitmap_mig_before_vm_start after "loadvm", which the upstream
savevm does explicitly afterwards - do that too.
This is exposed via the query-proxmox-support property
"pbs-dirty-bitmap-savevm".
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...instead of having them in the middle of the backup related patches.
These might (hopefully) become upstream at some point as well.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Use blk_unref to drop the last reference, which will close the block
backend and flush all caches and outstanding writes.
This is especially important for restoring to Ceph, as the userspace
librbd caches will not be flushed if the application exits immediately,
leading to potentially incomplete restores.
Reported-by: Eneko Lacunza <elacunza@binovo.es>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Lots of patches touched and some slight changes to the build process
since QEMU switched to meson as their build system. Functionality-wise
very little rebasing required.
New patches introduced:
* pve/0058: to fix VMA backups and clean up some code in general with
new 5.2 features now available to us (namely coroutine-enabled QMP).
* extra/0002: don't build man pages for guest agent when disabled
* extra/0003: fix live-migration with hugepages
* 0017 and 0018 are adjusted to fix snapshot abort and improve
snap performance a bit
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
