needed for it to be a proper replacement for linux-libc-dev when
resolving dependencies, such as for liburing-dev
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and put them into a new -dbgsym package for usage with
crash/kdump-tools/...
fixes#3465, and now allows to do the following (after installing
and configuring kdump-tools to collect kernel crash dumps) when the
system crashes:
$ apt install pve-kernel-5.11.21-1-dbgsym
$ crash /usr/lib/debug/boot/vmlinux-5.11.21-1-pve /var/crash/202106151236/dump.202106151236
crash 7.2.9
Copyright (C) 2002-2020 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
Copyright (C) 1999-2006 Hewlett-Packard Co
Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited
Copyright (C) 2006, 2007 VA Linux Systems Japan K.K.
Copyright (C) 2005, 2011 NEC Corporation
Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc.
Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc.
This program is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Enter "help copying" to see the conditions.
This program has absolutely no warranty. Enter "help warranty" for details.
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu"...
WARNING: kernel relocated [812MB]: patching 136336 gdb minimal_symbol values
KERNEL: /usr/lib/debug/boot/vmlinux-5.11.21-1-pve
DUMPFILE: /var/crash/202106151236/dump.202106151236 [PARTIAL DUMP]
CPUS: 4
DATE: Tue Jun 15 12:36:38 CEST 2021
UPTIME: 00:06:21
LOAD AVERAGE: 0.04, 0.11, 0.08
TASKS: 272
NODENAME: test
RELEASE: 5.11.21-1-pve
VERSION: #1 SMP PVE 5.11.21-1 (Tue, 01 Jun 2021 16:38:57 +0200)
MACHINE: x86_64 (3696 Mhz)
MEMORY: 8 GB
PANIC: "Kernel panic - not syncing: sysrq triggered crash"
PID: 3167
COMMAND: "bash"
TASK: ffff9220c8f5be00 [THREAD_INFO: ffff9220c8f5be00]
CPU: 3
STATE: TASK_RUNNING (PANIC)
crash> bt
PID: 3167 TASK: ffff9220c8f5be00 CPU: 3 COMMAND: "bash"
#0 [ffffa24ec0bfbc80] machine_kexec at ffffffffb3c751f3
#1 [ffffa24ec0bfbce0] __crash_kexec at ffffffffb3d61092
#2 [ffffa24ec0bfbdb0] panic at ffffffffb47b769d
#3 [ffffa24ec0bfbe30] sysrq_handle_crash at ffffffffb434da4a
#4 [ffffa24ec0bfbe40] __handle_sysrq.cold at ffffffffb47e2cdc
#5 [ffffa24ec0bfbe78] write_sysrq_trigger at ffffffffb434e3f8
#6 [ffffa24ec0bfbe90] proc_reg_write at ffffffffb3fc09ea
#7 [ffffa24ec0bfbeb0] vfs_write at ffffffffb3f143b6
#8 [ffffa24ec0bfbee8] ksys_write at ffffffffb3f16b97
#9 [ffffa24ec0bfbf28] __x64_sys_write at ffffffffb3f16c2a
#10 [ffffa24ec0bfbf38] do_syscall_64 at ffffffffb480e868
#11 [ffffa24ec0bfbf50] entry_SYSCALL_64_after_hwframe at ffffffffb4a0008c
RIP: 00007f367f7baf33 RSP: 00007ffe6175dc98 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f367f7baf33
RDX: 0000000000000002 RSI: 0000560510e640b0 RDI: 0000000000000001
RBP: 0000560510e640b0 R8: 000000000000000a R9: 0000000000000001
R10: 0000560510e5f800 R11: 0000000000000246 R12: 0000000000000002
R13: 00007f367f88b6a0 R14: 0000000000000002 R15: 00007f367f88b8a0
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
as well as lots of other fun things (see 'help' after opening a crash dump).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
The prepare/compile/install targets feel a bit mixed, so it's not
100% clear where this should happen.
But as the `.headers_compile_mark` already triggers various kernel
build targets with a correct kconfig setup, it is a good fit to add
the modules_prepare step (which is recommended to use when preparing
a out-of-three (OOT) module build environment like dkms expects)
there. As we can only copy (= install) the `scripts` directory
afterwards it follows that it needs to be moved afterwards. Moving
installing the `include` directory there is not really necessary but
it feels like a better place than the _prepare_ target and safes a
extra line, so move that over too.
In terms of actual changes to the built header package we get
additionally the, now generated, module.lds file.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Those files are generated by the `if_changed` macro from
scripts/Kbuild.include and are not really useful or interesting for
being shipped in the header packages and other distros (checked
Debian and Ubuntu) do not seem to ship those at all..
So, lets prune them to reduce shipped files dramatically, without
losing, well, anything.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we do not use module signing currently.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 77470417db)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since it prevents boot with our current way of building ZFS modules in
case a system is booted with secureboot enabled.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
This was long overdue, allows to access the full feature set of our
kernel for some tools using the Linux API directly.
Packaging mostly taken from Debian[0]
[0]: https://salsa.debian.org/kernel-team/linux/-/blob/debian/4.19.118-2/debian/rules.real#L367
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Since Ubuntu Eoan the kernel compression was changed from GZIP to
LZ4, due to slightly faster load times vs. a 25% size increase
trade-off (e.g. 5.0 had ~ 8, this one has ~ 12 MB; *but* the initrd
stays roughly the same size, and that one is 5 times bigger anyway)
If we want to keep that is in the stars, but for now correctly
document the build-dependency to LZ4.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The PC speaker (beeper) can only be managed by one module, and there
are two which could do so. The very basic INPUT_PCSPKR, and the more
advanced SND_PCSP which allows it to be used as primitive ALSA
soundcard, which for Proxmox Server projects, and all modern
workstations is not much of use.
As they both were aliased to the "pcspkr" module name, and used the
same internal driver name (being a replacment of the other), one
would get the following error message when both are loaded:
"Error: Driver 'pcspkr' is already registered, aborting..."
in the kernel log. This happens as by default both are tried to get
loaded. We do not want the more complex ALSA one, so disable that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allows to mount VFAT devices even if the currently running kernel was
removed before any VFAT, or other FS using the default Native
Language Support module was mounted during the current uptime.
This then could break updating the ESP partitions, which are mounted
with VFAT in a postrm triggered step - so at a time where the current
/lib/modules/... was already removed, and so the NLS could not get
loaded.
While there are a lot of different NLS, our kernel config has:
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
So compile that module as built-in.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Se it explicitly to myres, the current (since quite a bit) default of
git, to avoid noise in exports, just because another developer
prefers another algorithm here.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
from Depends to Recommends, since we now have an alternate bootloader
setup for some scenarios. both our installer and Debian's default setup
still install Grub by default anyway, but this allows removal without
hacks in case such an alternate bootloader is used on the system.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
RETPOLINE is now for sure included, further as this is build through
buildpackage the build dependencies are checked
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the current OOT are not compatible with 5.0 and we want to obsolete
them anyway sooner or later
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with the help of "dpkg-checkdep" to mimic the current build-environment
asciidoc-base: used by perf man pages
automake: used by ZFS/SPL (among other things)
cpio: used in debian/rules
debhelper: used in debian/rules
kmod: used in debian/rules (depmod)
libdw-dev,libelf-dev: used for unwinder
libnuma-dev: used by perf
libslang2-dev: used by perf tui
python-minimal: used by perf
zlib1g-dev: used by perf
thank you Thomas for additional review and extensive discussions
regarding what to include (or not ;))!
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
no problems had been reported with it, in contrary to igb and e1000e
so use the newer and better supported in tree driver.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
There where just to much issues with the 4.15 in tree drivers for our
users [1]. The updated igb and ixgbe drivers are compatible with
4.15, the e1000e driver needed to be ported to the new internal
kernel timer API, which is pretty straight forward.
[1]: https://forum.proxmox.com/threads/4-15-based-test-kernel-for-pve-5-x-available.42097/page-5
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to also include tools and scripts like objtool, which are now needed for
external module building
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with libraries that are not GPL-2-only compatible, fix previously typoed
variable, and add build-dep on libiberty-dev for CPLUS demangling.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this allows automatically running abi-check in non-fatal mode if an ABI
bump has just been done.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
in favor of generated rules.d snippet. this allows calling
dpkg-buildpackage in the build directory manually without setting up the
environment to match.
the top-level Makefile now only prepares the build directory by copying
and patching sources and generating the real files from debian/*.in
the actual build and packaging happens in debian/rules
