add EDAC cherry-picks

This commit is contained in:
Fabian Grünbichler 2018-01-29 15:00:40 +01:00
parent a70918fbbc
commit 1da60899e3
2 changed files with 139 additions and 0 deletions

View File

@ -0,0 +1,102 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Wed, 13 Sep 2017 18:42:14 +0800
Subject: [PATCH] EDAC, sb_edac: Don't create a second memory controller if HA1
is not present
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Yi Zhang reported the following failure on a 2-socket Haswell (E5-2603v3)
server (DELL PowerEdge 730xd):
EDAC sbridge: Some needed devices are missing
EDAC MC: Removed device 0 for sb_edac.c Haswell SrcID#0_Ha#0: DEV 0000:7f:12.0
EDAC MC: Removed device 1 for sb_edac.c Haswell SrcID#1_Ha#0: DEV 0000:ff:12.0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
The refactored sb_edac driver creates the IMC1 (the 2nd memory
controller) if any IMC1 device is present. In this case only
HA1_TA of IMC1 was present, but the driver expected to find
HA1/HA1_TM/HA1_TAD[0-3] devices too, leading to the above failure.
The document [1] says the 'E5-2603 v3' CPU has 4 memory channels max. Yi
Zhang inserted one DIMM per channel for each CPU, and did random error
address injection test with this patch:
4024 addresses fell in TOLM hole area
12715 addresses fell in CPU_SrcID#0_Ha#0_Chan#0_DIMM#0
12774 addresses fell in CPU_SrcID#0_Ha#0_Chan#1_DIMM#0
12798 addresses fell in CPU_SrcID#0_Ha#0_Chan#2_DIMM#0
12913 addresses fell in CPU_SrcID#0_Ha#0_Chan#3_DIMM#0
12674 addresses fell in CPU_SrcID#1_Ha#0_Chan#0_DIMM#0
12686 addresses fell in CPU_SrcID#1_Ha#0_Chan#1_DIMM#0
12882 addresses fell in CPU_SrcID#1_Ha#0_Chan#2_DIMM#0
12934 addresses fell in CPU_SrcID#1_Ha#0_Chan#3_DIMM#0
106400 addresses were injected totally.
The test result shows that all the 4 channels belong to IMC0 per CPU, so
the server really only has one IMC per CPU.
In the 1st page of chapter 2 in datasheet [2], it also says 'E5-2600 v3'
implements either one or two IMCs. For CPUs with one IMC, IMC1 is not
used and should be ignored.
Thus, do not create a second memory controller if the key HA1 is absent.
[1] http://ark.intel.com/products/83349/Intel-Xeon-Processor-E5-2603-v3-15M-Cache-1_60-GHz
[2] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf
Reported-and-tested-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: e2f747b1f42a ("EDAC, sb_edac: Assign EDAC memory controller per h/w controller")
Link: http://lkml.kernel.org/r/20170913104214.7325-1-qiuxu.zhuo@intel.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
(cherry picked from commit 15cc3ae001873845b5d842e212478a6570c7d938)
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
---
drivers/edac/sb_edac.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 80d860cb0746..7a3b201d51df 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -455,6 +455,7 @@ static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
static const struct pci_id_descr pci_dev_descr_ibridge[] = {
/* Processor Home Agent */
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0, 0, IMC0) },
+ { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1, 1, IMC1) },
/* Memory controller */
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA, 0, IMC0) },
@@ -465,7 +466,6 @@ static const struct pci_id_descr pci_dev_descr_ibridge[] = {
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3, 0, IMC0) },
/* Optional, mode 2HA */
- { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1, 1, IMC1) },
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA, 1, IMC1) },
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS, 1, IMC1) },
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0, 1, IMC1) },
@@ -2260,6 +2260,13 @@ static int sbridge_get_onedevice(struct pci_dev **prev,
next_imc:
sbridge_dev = get_sbridge_dev(bus, dev_descr->dom, multi_bus, sbridge_dev);
if (!sbridge_dev) {
+ /* If the HA1 wasn't found, don't create EDAC second memory controller */
+ if (dev_descr->dom == IMC1 && devno != 1) {
+ edac_dbg(0, "Skip IMC1: %04x:%04x (since HA1 was absent)\n",
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ pci_dev_put(pdev);
+ return 0;
+ }
if (dev_descr->dom == SOCK)
goto out_imc;
--
2.14.2

View File

@ -0,0 +1,37 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Date: Mon, 16 Oct 2017 12:40:29 -0500
Subject: [PATCH] EDAC, sb_edac: Fix missing break in switch
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Add missing break statement in order to prevent the code from falling
through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com
Signed-off-by: Borislav Petkov <bp@suse.de>
(cherry picked from commit a8e9b186f153a44690ad0363a56716e7077ad28c)
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
---
drivers/edac/sb_edac.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 7a3b201d51df..fb0264ef83a3 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -2467,6 +2467,7 @@ static int ibridge_mci_bind_devs(struct mem_ctl_info *mci,
case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA:
case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA:
pvt->pci_ta = pdev;
+ break;
case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS:
case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS:
pvt->pci_ras = pdev;
--
2.14.2