2085a5f992
When dRAID performs a normal read operation only the data columns in the raid map are read from disk. This is enough information to calculate the checksum, verify it, and return the needed data to the application. It's only in the event of a checksum failure that the additional parity and any empty columns must be read since they are required for parity reconstruction. Reading these additional columns is handled by vdev_raidz_read_all() which calls vdev_draid_map_alloc_empty() to expand the raid_map_t and submit IOs for the missing columns. This all works correctly, but it fails to account for any "short" columns. These are data columns which are padded with a empty skip sector at the end. Since that empty sector is not needed for a normal read it's not read when columns is first read from disk. However, like the parity and empty columns the skip sector is needed to perform reconstruction. The fix is to mark any "short" columns as never being read by clearing the rc_tried flag when expanding the raid_map_t. This will cause the entire column to re-read from disk in the event of a checksum failure allowing the self-healing functionality to repair the block. Note that this only effects the self-healing feature because when scrubbing a pool the parity, data, and empty columns are all read initially to verify their contents. Furthermore, only blocks which contain "short" columns would be effected, and only when the memory backing the skip sector wasn't already zeroed out. This change extends the existing redundancy_raidz.ksh test case to verify self-healing (as well as resilver and scrub). Then applies the same test case to dRAID with a slightly modified version of the test script called redundancy_draid.ksh. The unused variable combrec was also removed from both test cases. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #12010 |
||
|---|---|---|
| .. | ||
| runfiles | ||
| test-runner | ||
| zfs-tests | ||
| Makefile.am | ||
| README.md | ||
ZFS Test Suite README
- Building and installing the ZFS Test Suite
The ZFS Test Suite runs under the test-runner framework. This framework is built along side the standard ZFS utilities and is included as part of zfs-test package. The zfs-test package can be built from source as follows:
$ ./configure
$ make pkg-utils
The resulting packages can be installed using the rpm or dpkg command as appropriate for your distributions. Alternately, if you have installed ZFS from a distributions repository (not from source) the zfs-test package may be provided for your distribution.
- Installed from source
$ rpm -ivh ./zfs-test*.rpm, or
$ dpkg -i ./zfs-test*.deb,
- Installed from package repository
$ yum install zfs-test
$ apt-get install zfs-test
- Running the ZFS Test Suite
The pre-requisites for running the ZFS Test Suite are:
- Three scratch disks
- Specify the disks you wish to use in the $DISKS variable, as a space delimited list like this: DISKS='vdb vdc vdd'. By default the zfs-tests.sh script will construct three loopback devices to be used for testing: DISKS='loop0 loop1 loop2'.
- A non-root user with a full set of basic privileges and the ability to sudo(8) to root without a password to run the test.
- Specify any pools you wish to preserve as a space delimited list in the $KEEP variable. All pools detected at the start of testing are added automatically.
- The ZFS Test Suite will add users and groups to test machine to verify functionality. Therefore it is strongly advised that a dedicated test machine, which can be a VM, be used for testing.
Once the pre-requisites are satisfied simply run the zfs-tests.sh script:
$ /usr/share/zfs/zfs-tests.sh
Alternately, the zfs-tests.sh script can be run from the source tree to allow developers to rapidly validate their work. In this mode the ZFS utilities and modules from the source tree will be used (rather than those installed on the system). In order to avoid certain types of failures you will need to ensure the ZFS udev rules are installed. This can be done manually or by ensuring some version of ZFS is installed on the system.
$ ./scripts/zfs-tests.sh
The following zfs-tests.sh options are supported:
-v Verbose zfs-tests.sh output When specified additional
information describing the test environment will be logged
prior to invoking test-runner. This includes the runfile
being used, the DISKS targeted, pools to keep, etc.
-q Quiet test-runner output. When specified it is passed to
test-runner(1) which causes output to be written to the
console only for tests that do not pass and the results
summary.
-x Remove all testpools, dm, lo, and files (unsafe). When
specified the script will attempt to remove any leftover
configuration from a previous test run. This includes
destroying any pools named testpool, unused DM devices,
and loopback devices backed by file-vdevs. This operation
can be DANGEROUS because it is possible that the script
will mistakenly remove a resource not related to the testing.
-k Disable cleanup after test failure. When specified the
zfs-tests.sh script will not perform any additional cleanup
when test-runner exists. This is useful when the results of
a specific test need to be preserved for further analysis.
-f Use sparse files directly instead of loopback devices for
the testing. When running in this mode certain tests will
be skipped which depend on real block devices.
-c Only create and populate constrained path
-I NUM Number of iterations
-d DIR Create sparse files for vdevs in the DIR directory. By
default these files are created under /var/tmp/.
-s SIZE Use vdevs of SIZE (default: 4G)
-r RUNFILES Run tests in RUNFILES (default: common.run,linux.run)
-t PATH Run single test at PATH relative to test suite
-T TAGS Comma separated list of tags (default: 'functional')
-u USER Run single test as USER (default: root)
The ZFS Test Suite allows the user to specify a subset of the tests via a runfile or list of tags.
The format of the runfile is explained in test-runner(1), and the files that zfs-tests.sh uses are available for reference under /usr/share/zfs/runfiles. To specify a custom runfile, use the -r option:
$ /usr/share/zfs/zfs-tests.sh -r my_tests.run
Otherwise user can set needed tags to run only specific tests.
- Test results
While the ZFS Test Suite is running, one informational line is printed at the
end of each test, and a results summary is printed at the end of the run. The
results summary includes the location of the complete logs, which is logged in
the form /var/tmp/test_results/[ISO 8601 date]. A normal test run launched
with the zfs-tests.sh wrapper script will look something like this:
$ /usr/share/zfs/zfs-tests.sh -v -d /tmp/test
--- Configuration ---
Runfile: /usr/share/zfs/runfiles/linux.run
STF_TOOLS: /usr/share/zfs/test-runner
STF_SUITE: /usr/share/zfs/zfs-tests
STF_PATH: /var/tmp/constrained_path.G0Sf
FILEDIR: /tmp/test
FILES: /tmp/test/file-vdev0 /tmp/test/file-vdev1 /tmp/test/file-vdev2
LOOPBACKS: /dev/loop0 /dev/loop1 /dev/loop2
DISKS: loop0 loop1 loop2
NUM_DISKS: 3
FILESIZE: 4G
ITERATIONS: 1
TAGS: functional
Keep pool(s): rpool
/usr/share/zfs/test-runner/bin/test-runner.py -c /usr/share/zfs/runfiles/linux.run \
-T functional -i /usr/share/zfs/zfs-tests -I 1
Test: /usr/share/zfs/zfs-tests/tests/functional/arc/setup (run as root) [00:00] [PASS]
...more than 1100 additional tests...
Test: /usr/share/zfs/zfs-tests/tests/functional/zvol/zvol_swap/cleanup (run as root) [00:00] [PASS]
Results Summary
SKIP 52
PASS 1129
Running Time: 02:35:33
Percent passed: 95.6%
Log directory: /var/tmp/test_results/20180515T054509