mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-26 03:09:34 +03:00
5caeef02fa
This feature allows disks to be added one at a time to a RAID-Z group, expanding its capacity incrementally. This feature is especially useful for small pools (typically with only one RAID-Z group), where there isn't sufficient hardware to add capacity by adding a whole new RAID-Z group (typically doubling the number of disks). == Initiating expansion == A new device (disk) can be attached to an existing RAIDZ vdev, by running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank raidz2-0 sda`. The new device will become part of the RAIDZ group. A "raidz expansion" will be initiated, and the new device will contribute additional space to the RAIDZ group once the expansion completes. The `feature@raidz_expansion` on-disk feature flag must be `enabled` to initiate an expansion, and it remains `active` for the life of the pool. In other words, pools with expanded RAIDZ vdevs can not be imported by older releases of the ZFS software. == During expansion == The expansion entails reading all allocated space from existing disks in the RAIDZ group, and rewriting it to the new disks in the RAIDZ group (including the newly added device). The expansion progress can be monitored with `zpool status`. Data redundancy is maintained during (and after) the expansion. If a disk fails while the expansion is in progress, the expansion pauses until the health of the RAIDZ vdev is restored (e.g. by replacing the failed disk and waiting for reconstruction to complete). The pool remains accessible during expansion. Following a reboot or export/import, the expansion resumes where it left off. == After expansion == When the expansion completes, the additional space is available for use, and is reflected in the `available` zfs property (as seen in `zfs list`, `df`, etc). Expansion does not change the number of failures that can be tolerated without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after expansion). A RAIDZ vdev can be expanded multiple times. After the expansion completes, old blocks remain with their old data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but distributed among the larger set of disks. New blocks will be written with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ vdev's "assumed parity ratio" does not change, so slightly less space than is expected may be reported for newly-written blocks, according to `zfs list`, `df`, `ls -s`, and similar tools. Sponsored-by: The FreeBSD Foundation Sponsored-by: iXsystems, Inc. Sponsored-by: vStack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Authored-by: Matthew Ahrens <mahrens@delphix.com> Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com> Contributions-by: Stuart Maybee <stuart.maybee@comcast.net> Contributions-by: Thorsten Behrens <tbehrens@outlook.com> Contributions-by: Fmstrat <nospam@nowsci.com> Contributions-by: Don Brady <dev.fs.zfs@gmail.com> Signed-off-by: Don Brady <dev.fs.zfs@gmail.com> Closes #15022
769 lines
23 KiB
C
769 lines
23 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or https://opensource.org/licenses/CDDL-1.0.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2011, 2018 by Delphix. All rights reserved.
|
|
* Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
|
|
* Copyright (c) 2013, Joyent, Inc. All rights reserved.
|
|
* Copyright (c) 2014, Nexenta Systems, Inc. All rights reserved.
|
|
* Copyright (c) 2017, Intel Corporation.
|
|
* Copyright (c) 2019, Klara Inc.
|
|
* Copyright (c) 2019, Allan Jude
|
|
*/
|
|
|
|
#ifndef _KERNEL
|
|
#include <errno.h>
|
|
#include <string.h>
|
|
#include <dirent.h>
|
|
#include <search.h>
|
|
#include <sys/stat.h>
|
|
#endif
|
|
#include <sys/debug.h>
|
|
#include <sys/fs/zfs.h>
|
|
#include <sys/inttypes.h>
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/zfs_sysfs.h>
|
|
#include "zfeature_common.h"
|
|
|
|
/*
|
|
* Set to disable all feature checks while opening pools, allowing pools with
|
|
* unsupported features to be opened. Set for testing only.
|
|
*/
|
|
boolean_t zfeature_checks_disable = B_FALSE;
|
|
|
|
zfeature_info_t spa_feature_table[SPA_FEATURES];
|
|
|
|
/*
|
|
* Valid characters for feature guids. This list is mainly for aesthetic
|
|
* purposes and could be expanded in the future. There are different allowed
|
|
* characters in the guids reverse dns portion (before the colon) and its
|
|
* short name (after the colon).
|
|
*/
|
|
static int
|
|
valid_char(char c, boolean_t after_colon)
|
|
{
|
|
return ((c >= 'a' && c <= 'z') ||
|
|
(c >= '0' && c <= '9') ||
|
|
(after_colon && c == '_') ||
|
|
(!after_colon && (c == '.' || c == '-')));
|
|
}
|
|
|
|
/*
|
|
* Every feature guid must contain exactly one colon which separates a reverse
|
|
* dns organization name from the feature's "short" name (e.g.
|
|
* "com.company:feature_name").
|
|
*/
|
|
boolean_t
|
|
zfeature_is_valid_guid(const char *name)
|
|
{
|
|
int i;
|
|
boolean_t has_colon = B_FALSE;
|
|
|
|
i = 0;
|
|
while (name[i] != '\0') {
|
|
char c = name[i++];
|
|
if (c == ':') {
|
|
if (has_colon)
|
|
return (B_FALSE);
|
|
has_colon = B_TRUE;
|
|
continue;
|
|
}
|
|
if (!valid_char(c, has_colon))
|
|
return (B_FALSE);
|
|
}
|
|
|
|
return (has_colon);
|
|
}
|
|
|
|
boolean_t
|
|
zfeature_is_supported(const char *guid)
|
|
{
|
|
if (zfeature_checks_disable)
|
|
return (B_TRUE);
|
|
|
|
for (spa_feature_t i = 0; i < SPA_FEATURES; i++) {
|
|
zfeature_info_t *feature = &spa_feature_table[i];
|
|
if (!feature->fi_zfs_mod_supported)
|
|
continue;
|
|
if (strcmp(guid, feature->fi_guid) == 0)
|
|
return (B_TRUE);
|
|
}
|
|
return (B_FALSE);
|
|
}
|
|
|
|
int
|
|
zfeature_lookup_guid(const char *guid, spa_feature_t *res)
|
|
{
|
|
for (spa_feature_t i = 0; i < SPA_FEATURES; i++) {
|
|
zfeature_info_t *feature = &spa_feature_table[i];
|
|
if (!feature->fi_zfs_mod_supported)
|
|
continue;
|
|
if (strcmp(guid, feature->fi_guid) == 0) {
|
|
if (res != NULL)
|
|
*res = i;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
return (ENOENT);
|
|
}
|
|
|
|
int
|
|
zfeature_lookup_name(const char *name, spa_feature_t *res)
|
|
{
|
|
for (spa_feature_t i = 0; i < SPA_FEATURES; i++) {
|
|
zfeature_info_t *feature = &spa_feature_table[i];
|
|
if (!feature->fi_zfs_mod_supported)
|
|
continue;
|
|
if (strcmp(name, feature->fi_uname) == 0) {
|
|
if (res != NULL)
|
|
*res = i;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
return (ENOENT);
|
|
}
|
|
|
|
boolean_t
|
|
zfeature_depends_on(spa_feature_t fid, spa_feature_t check)
|
|
{
|
|
zfeature_info_t *feature = &spa_feature_table[fid];
|
|
|
|
for (int i = 0; feature->fi_depends[i] != SPA_FEATURE_NONE; i++) {
|
|
if (feature->fi_depends[i] == check)
|
|
return (B_TRUE);
|
|
}
|
|
return (B_FALSE);
|
|
}
|
|
|
|
static boolean_t
|
|
deps_contains_feature(const spa_feature_t *deps, const spa_feature_t feature)
|
|
{
|
|
for (int i = 0; deps[i] != SPA_FEATURE_NONE; i++)
|
|
if (deps[i] == feature)
|
|
return (B_TRUE);
|
|
|
|
return (B_FALSE);
|
|
}
|
|
|
|
#define STRCMP ((int(*)(const void *, const void *))&strcmp)
|
|
struct zfs_mod_supported_features {
|
|
void *tree;
|
|
boolean_t all_features;
|
|
};
|
|
|
|
struct zfs_mod_supported_features *
|
|
zfs_mod_list_supported(const char *scope)
|
|
{
|
|
#if defined(__FreeBSD__) || defined(_KERNEL) || defined(LIB_ZPOOL_BUILD)
|
|
(void) scope;
|
|
return (NULL);
|
|
#else
|
|
struct zfs_mod_supported_features *ret = calloc(1, sizeof (*ret));
|
|
if (ret == NULL)
|
|
return (NULL);
|
|
|
|
DIR *sysfs_dir = NULL;
|
|
char path[128];
|
|
|
|
if (snprintf(path, sizeof (path), "%s/%s",
|
|
ZFS_SYSFS_DIR, scope) < sizeof (path))
|
|
sysfs_dir = opendir(path);
|
|
if (sysfs_dir == NULL && errno == ENOENT) {
|
|
if (snprintf(path, sizeof (path), "%s/%s",
|
|
ZFS_SYSFS_ALT_DIR, scope) < sizeof (path))
|
|
sysfs_dir = opendir(path);
|
|
}
|
|
if (sysfs_dir == NULL) {
|
|
ret->all_features = errno == ENOENT &&
|
|
(access(ZFS_SYSFS_DIR, F_OK) == 0 ||
|
|
access(ZFS_SYSFS_ALT_DIR, F_OK) == 0);
|
|
return (ret);
|
|
}
|
|
|
|
struct dirent *node;
|
|
while ((node = readdir(sysfs_dir)) != NULL) {
|
|
if (strcmp(node->d_name, ".") == 0 ||
|
|
strcmp(node->d_name, "..") == 0)
|
|
continue;
|
|
|
|
char *name = strdup(node->d_name);
|
|
if (name == NULL) {
|
|
goto nomem;
|
|
}
|
|
|
|
if (tsearch(name, &ret->tree, STRCMP) == NULL) {
|
|
/*
|
|
* Don't bother checking for duplicate entries:
|
|
* we're iterating a single directory.
|
|
*/
|
|
free(name);
|
|
goto nomem;
|
|
}
|
|
}
|
|
|
|
end:
|
|
closedir(sysfs_dir);
|
|
return (ret);
|
|
|
|
nomem:
|
|
zfs_mod_list_supported_free(ret);
|
|
ret = NULL;
|
|
goto end;
|
|
#endif
|
|
}
|
|
|
|
void
|
|
zfs_mod_list_supported_free(struct zfs_mod_supported_features *list)
|
|
{
|
|
#if !defined(__FreeBSD__) && !defined(_KERNEL) && !defined(LIB_ZPOOL_BUILD)
|
|
if (list) {
|
|
tdestroy(list->tree, free);
|
|
free(list);
|
|
}
|
|
#else
|
|
(void) list;
|
|
#endif
|
|
}
|
|
|
|
#if !defined(_KERNEL) && !defined(LIB_ZPOOL_BUILD)
|
|
static boolean_t
|
|
zfs_mod_supported_impl(const char *scope, const char *name, const char *sysfs)
|
|
{
|
|
char path[128];
|
|
if (snprintf(path, sizeof (path), "%s%s%s%s%s", sysfs,
|
|
scope == NULL ? "" : "/", scope ?: "",
|
|
name == NULL ? "" : "/", name ?: "") < sizeof (path))
|
|
return (access(path, F_OK) == 0);
|
|
else
|
|
return (B_FALSE);
|
|
}
|
|
|
|
boolean_t
|
|
zfs_mod_supported(const char *scope, const char *name,
|
|
const struct zfs_mod_supported_features *sfeatures)
|
|
{
|
|
boolean_t supported;
|
|
|
|
if (sfeatures != NULL)
|
|
return (sfeatures->all_features ||
|
|
tfind(name, &sfeatures->tree, STRCMP));
|
|
|
|
/*
|
|
* Check both the primary and alternate sysfs locations to determine
|
|
* if the required functionality is supported.
|
|
*/
|
|
supported = (zfs_mod_supported_impl(scope, name, ZFS_SYSFS_DIR) ||
|
|
zfs_mod_supported_impl(scope, name, ZFS_SYSFS_ALT_DIR));
|
|
|
|
/*
|
|
* For backwards compatibility with kernel modules that predate
|
|
* supported feature/property checking. Report the feature/property
|
|
* as supported if the kernel module is loaded but the requested
|
|
* scope directory does not exist.
|
|
*/
|
|
if (supported == B_FALSE) {
|
|
if ((access(ZFS_SYSFS_DIR, F_OK) == 0 &&
|
|
!zfs_mod_supported_impl(scope, NULL, ZFS_SYSFS_DIR)) ||
|
|
(access(ZFS_SYSFS_ALT_DIR, F_OK) == 0 &&
|
|
!zfs_mod_supported_impl(scope, NULL, ZFS_SYSFS_ALT_DIR))) {
|
|
supported = B_TRUE;
|
|
}
|
|
}
|
|
|
|
return (supported);
|
|
}
|
|
#endif
|
|
|
|
static boolean_t
|
|
zfs_mod_supported_feature(const char *name,
|
|
const struct zfs_mod_supported_features *sfeatures)
|
|
{
|
|
/*
|
|
* The zfs module spa_feature_table[], whether in-kernel or in
|
|
* libzpool, always supports all the features. libzfs needs to
|
|
* query the running module, via sysfs, to determine which
|
|
* features are supported.
|
|
*
|
|
* The equivalent _can_ be done on FreeBSD by way of the sysctl
|
|
* tree, but this has not been done yet. Therefore, we return
|
|
* that all features are supported.
|
|
*/
|
|
|
|
#if defined(_KERNEL) || defined(LIB_ZPOOL_BUILD) || defined(__FreeBSD__)
|
|
(void) name, (void) sfeatures;
|
|
return (B_TRUE);
|
|
#else
|
|
return (zfs_mod_supported(ZFS_SYSFS_POOL_FEATURES, name, sfeatures));
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
zfeature_register(spa_feature_t fid, const char *guid, const char *name,
|
|
const char *desc, zfeature_flags_t flags, zfeature_type_t type,
|
|
const spa_feature_t *deps,
|
|
const struct zfs_mod_supported_features *sfeatures)
|
|
{
|
|
zfeature_info_t *feature = &spa_feature_table[fid];
|
|
static const spa_feature_t nodeps[] = { SPA_FEATURE_NONE };
|
|
|
|
ASSERT(name != NULL);
|
|
ASSERT(desc != NULL);
|
|
ASSERT((flags & ZFEATURE_FLAG_READONLY_COMPAT) == 0 ||
|
|
(flags & ZFEATURE_FLAG_MOS) == 0);
|
|
ASSERT3U(fid, <, SPA_FEATURES);
|
|
ASSERT(zfeature_is_valid_guid(guid));
|
|
|
|
if (deps == NULL)
|
|
deps = nodeps;
|
|
|
|
VERIFY(((flags & ZFEATURE_FLAG_PER_DATASET) == 0) ||
|
|
(deps_contains_feature(deps, SPA_FEATURE_EXTENSIBLE_DATASET)));
|
|
|
|
feature->fi_feature = fid;
|
|
feature->fi_guid = guid;
|
|
feature->fi_uname = name;
|
|
feature->fi_desc = desc;
|
|
feature->fi_flags = flags;
|
|
feature->fi_type = type;
|
|
feature->fi_depends = deps;
|
|
feature->fi_zfs_mod_supported =
|
|
zfs_mod_supported_feature(guid, sfeatures);
|
|
}
|
|
|
|
/*
|
|
* Every feature has a GUID of the form com.example:feature_name. The
|
|
* reversed DNS name ensures that the feature's GUID is unique across all ZFS
|
|
* implementations. This allows companies to independently develop and
|
|
* release features. Examples include org.delphix and org.datto. Previously,
|
|
* features developed on one implementation have used that implementation's
|
|
* domain name (e.g. org.illumos and org.zfsonlinux). Use of the org.openzfs
|
|
* domain name is recommended for new features which are developed by the
|
|
* OpenZFS community and its platforms. This domain may optionally be used by
|
|
* companies developing features for initial release through an OpenZFS
|
|
* implementation. Use of the org.openzfs domain requires reserving the
|
|
* feature name in advance with the OpenZFS project.
|
|
*/
|
|
void
|
|
zpool_feature_init(void)
|
|
{
|
|
struct zfs_mod_supported_features *sfeatures =
|
|
zfs_mod_list_supported(ZFS_SYSFS_POOL_FEATURES);
|
|
|
|
zfeature_register(SPA_FEATURE_ASYNC_DESTROY,
|
|
"com.delphix:async_destroy", "async_destroy",
|
|
"Destroy filesystems asynchronously.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_EMPTY_BPOBJ,
|
|
"com.delphix:empty_bpobj", "empty_bpobj",
|
|
"Snapshots use less space.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_LZ4_COMPRESS,
|
|
"org.illumos:lz4_compress", "lz4_compress",
|
|
"LZ4 compression algorithm support.",
|
|
ZFEATURE_FLAG_ACTIVATE_ON_ENABLE, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_MULTI_VDEV_CRASH_DUMP,
|
|
"com.joyent:multi_vdev_crash_dump", "multi_vdev_crash_dump",
|
|
"Crash dumps to multiple vdev pools.",
|
|
0, ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_SPACEMAP_HISTOGRAM,
|
|
"com.delphix:spacemap_histogram", "spacemap_histogram",
|
|
"Spacemaps maintain space histograms.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_ENABLED_TXG,
|
|
"com.delphix:enabled_txg", "enabled_txg",
|
|
"Record txg at which a feature is enabled",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t hole_birth_deps[] = {
|
|
SPA_FEATURE_ENABLED_TXG,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_HOLE_BIRTH,
|
|
"com.delphix:hole_birth", "hole_birth",
|
|
"Retain hole birth txg for more precise zfs send",
|
|
ZFEATURE_FLAG_MOS | ZFEATURE_FLAG_ACTIVATE_ON_ENABLE,
|
|
ZFEATURE_TYPE_BOOLEAN, hole_birth_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_POOL_CHECKPOINT,
|
|
"com.delphix:zpool_checkpoint", "zpool_checkpoint",
|
|
"Pool state can be checkpointed, allowing rewind later.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_SPACEMAP_V2,
|
|
"com.delphix:spacemap_v2", "spacemap_v2",
|
|
"Space maps representing large segments are more efficient.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT | ZFEATURE_FLAG_ACTIVATE_ON_ENABLE,
|
|
ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
"com.delphix:extensible_dataset", "extensible_dataset",
|
|
"Enhanced dataset functionality, used by other features.",
|
|
0, ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t bookmarks_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
|
|
zfeature_register(SPA_FEATURE_BOOKMARKS,
|
|
"com.delphix:bookmarks", "bookmarks",
|
|
"\"zfs bookmark\" command",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN,
|
|
bookmarks_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t filesystem_limits_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_FS_SS_LIMIT,
|
|
"com.joyent:filesystem_limits", "filesystem_limits",
|
|
"Filesystem and snapshot limits.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN,
|
|
filesystem_limits_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_EMBEDDED_DATA,
|
|
"com.delphix:embedded_data", "embedded_data",
|
|
"Blocks which compress very well use even less space.",
|
|
ZFEATURE_FLAG_MOS | ZFEATURE_FLAG_ACTIVATE_ON_ENABLE,
|
|
ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t livelist_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_LIVELIST,
|
|
"com.delphix:livelist", "livelist",
|
|
"Improved clone deletion performance.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN,
|
|
livelist_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t log_spacemap_deps[] = {
|
|
SPA_FEATURE_SPACEMAP_V2,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_LOG_SPACEMAP,
|
|
"com.delphix:log_spacemap", "log_spacemap",
|
|
"Log metaslab changes on a single spacemap and "
|
|
"flush them periodically.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN,
|
|
log_spacemap_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t large_blocks_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_LARGE_BLOCKS,
|
|
"org.open-zfs:large_blocks", "large_blocks",
|
|
"Support for blocks larger than 128KB.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
large_blocks_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t large_dnode_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_LARGE_DNODE,
|
|
"org.zfsonlinux:large_dnode", "large_dnode",
|
|
"Variable on-disk size of dnodes.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
large_dnode_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t sha512_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_SHA512,
|
|
"org.illumos:sha512", "sha512",
|
|
"SHA-512/256 hash algorithm.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
sha512_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t skein_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_SKEIN,
|
|
"org.illumos:skein", "skein",
|
|
"Skein hash algorithm.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
skein_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t edonr_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_EDONR,
|
|
"org.illumos:edonr", "edonr",
|
|
"Edon-R hash algorithm.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
edonr_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t redact_books_deps[] = {
|
|
SPA_FEATURE_BOOKMARK_V2,
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_BOOKMARKS,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_REDACTION_BOOKMARKS,
|
|
"com.delphix:redaction_bookmarks", "redaction_bookmarks",
|
|
"Support for bookmarks which store redaction lists for zfs "
|
|
"redacted send/recv.", 0, ZFEATURE_TYPE_BOOLEAN,
|
|
redact_books_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t redact_datasets_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_REDACTED_DATASETS,
|
|
"com.delphix:redacted_datasets", "redacted_datasets",
|
|
"Support for redacted datasets, produced by receiving "
|
|
"a redacted zfs send stream.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_UINT64_ARRAY,
|
|
redact_datasets_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t bookmark_written_deps[] = {
|
|
SPA_FEATURE_BOOKMARK_V2,
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_BOOKMARKS,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_BOOKMARK_WRITTEN,
|
|
"com.delphix:bookmark_written", "bookmark_written",
|
|
"Additional accounting, enabling the written#<bookmark> "
|
|
"property (space written since a bookmark), "
|
|
"and estimates of send stream sizes for incrementals from "
|
|
"bookmarks.",
|
|
0, ZFEATURE_TYPE_BOOLEAN, bookmark_written_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_DEVICE_REMOVAL,
|
|
"com.delphix:device_removal", "device_removal",
|
|
"Top-level vdevs can be removed, reducing logical pool size.",
|
|
ZFEATURE_FLAG_MOS, ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t obsolete_counts_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_DEVICE_REMOVAL,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_OBSOLETE_COUNTS,
|
|
"com.delphix:obsolete_counts", "obsolete_counts",
|
|
"Reduce memory used by removed devices when their blocks "
|
|
"are freed or remapped.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN,
|
|
obsolete_counts_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t userobj_accounting_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_USEROBJ_ACCOUNTING,
|
|
"org.zfsonlinux:userobj_accounting", "userobj_accounting",
|
|
"User/Group object accounting.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT | ZFEATURE_FLAG_PER_DATASET,
|
|
ZFEATURE_TYPE_BOOLEAN, userobj_accounting_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t bookmark_v2_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_BOOKMARKS,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_BOOKMARK_V2,
|
|
"com.datto:bookmark_v2", "bookmark_v2",
|
|
"Support for larger bookmarks",
|
|
0, ZFEATURE_TYPE_BOOLEAN, bookmark_v2_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t encryption_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_BOOKMARK_V2,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_ENCRYPTION,
|
|
"com.datto:encryption", "encryption",
|
|
"Support for dataset level encryption",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
encryption_deps, sfeatures);
|
|
}
|
|
|
|
{
|
|
static const spa_feature_t project_quota_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_PROJECT_QUOTA,
|
|
"org.zfsonlinux:project_quota", "project_quota",
|
|
"space/object accounting based on project ID.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT | ZFEATURE_FLAG_PER_DATASET,
|
|
ZFEATURE_TYPE_BOOLEAN, project_quota_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_ALLOCATION_CLASSES,
|
|
"org.zfsonlinux:allocation_classes", "allocation_classes",
|
|
"Support for separate allocation classes.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_RESILVER_DEFER,
|
|
"com.datto:resilver_defer", "resilver_defer",
|
|
"Support for deferring new resilvers when one is already running.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_DEVICE_REBUILD,
|
|
"org.openzfs:device_rebuild", "device_rebuild",
|
|
"Support for sequential mirror/dRAID device rebuilds",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t zstd_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_ZSTD_COMPRESS,
|
|
"org.freebsd:zstd_compress", "zstd_compress",
|
|
"zstd compression algorithm support.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN, zstd_deps,
|
|
sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_DRAID,
|
|
"org.openzfs:draid", "draid", "Support for distributed spare RAID",
|
|
ZFEATURE_FLAG_MOS, ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t zilsaxattr_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_ZILSAXATTR,
|
|
"org.openzfs:zilsaxattr", "zilsaxattr",
|
|
"Support for xattr=sa extended attribute logging in ZIL.",
|
|
ZFEATURE_FLAG_PER_DATASET | ZFEATURE_FLAG_READONLY_COMPAT,
|
|
ZFEATURE_TYPE_BOOLEAN, zilsaxattr_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_HEAD_ERRLOG,
|
|
"com.delphix:head_errlog", "head_errlog",
|
|
"Support for per-dataset on-disk error logs.",
|
|
ZFEATURE_FLAG_ACTIVATE_ON_ENABLE, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t blake3_deps[] = {
|
|
SPA_FEATURE_EXTENSIBLE_DATASET,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_BLAKE3,
|
|
"org.openzfs:blake3", "blake3",
|
|
"BLAKE3 hash algorithm.",
|
|
ZFEATURE_FLAG_PER_DATASET, ZFEATURE_TYPE_BOOLEAN,
|
|
blake3_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_BLOCK_CLONING,
|
|
"com.fudosecurity:block_cloning", "block_cloning",
|
|
"Support for block cloning via Block Reference Table.",
|
|
ZFEATURE_FLAG_READONLY_COMPAT, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
zfeature_register(SPA_FEATURE_AVZ_V2,
|
|
"com.klarasystems:vdev_zaps_v2", "vdev_zaps_v2",
|
|
"Support for root vdev ZAP.",
|
|
ZFEATURE_FLAG_MOS, ZFEATURE_TYPE_BOOLEAN, NULL,
|
|
sfeatures);
|
|
|
|
{
|
|
static const spa_feature_t redact_list_spill_deps[] = {
|
|
SPA_FEATURE_REDACTION_BOOKMARKS,
|
|
SPA_FEATURE_NONE
|
|
};
|
|
zfeature_register(SPA_FEATURE_REDACTION_LIST_SPILL,
|
|
"com.delphix:redaction_list_spill", "redaction_list_spill",
|
|
"Support for increased number of redaction_snapshot "
|
|
"arguments in zfs redact.", 0, ZFEATURE_TYPE_BOOLEAN,
|
|
redact_list_spill_deps, sfeatures);
|
|
}
|
|
|
|
zfeature_register(SPA_FEATURE_RAIDZ_EXPANSION,
|
|
"org.openzfs:raidz_expansion", "raidz_expansion",
|
|
"Support for raidz expansion",
|
|
ZFEATURE_FLAG_MOS, ZFEATURE_TYPE_BOOLEAN, NULL, sfeatures);
|
|
|
|
zfs_mod_list_supported_free(sfeatures);
|
|
}
|
|
|
|
#if defined(_KERNEL)
|
|
EXPORT_SYMBOL(zfeature_lookup_guid);
|
|
EXPORT_SYMBOL(zfeature_lookup_name);
|
|
EXPORT_SYMBOL(zfeature_is_supported);
|
|
EXPORT_SYMBOL(zfeature_is_valid_guid);
|
|
EXPORT_SYMBOL(zfeature_depends_on);
|
|
EXPORT_SYMBOL(zpool_feature_init);
|
|
EXPORT_SYMBOL(spa_feature_table);
|
|
#endif
|