c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-27 11:29:36 +03:00
Code Issues Packages Projects Releases Wiki Activity
b445b25b27
mirror_zfs/config/kernel-blk-queue.m4
Tony Hutter 6f73d02168
zvol: Support blk-mq for better performance 
Add support for the kernel's block multiqueue (blk-mq) interface in
the zvol block driver.  blk-mq creates multiple request queues on
different CPUs rather than having a single request queue.  This can
improve zvol performance with multithreaded reads/writes.

This implementation uses the blk-mq interfaces on 4.13 or newer
kernels.  Building against older kernels will fall back to the
older BIO interfaces.

Note that you must set the `zvol_use_blk_mq` module param to
enable the blk-mq API.  It is disabled by default.

In addition, this commit lets the zvol blk-mq layer process whole
`struct request` IOs at a time, rather than breaking them down
into their individual BIOs.  This reduces dbuf lock contention
and overhead versus the legacy zvol submit_bio() codepath.

	sequential dd to one zvol, 8k volblocksize, no O_DIRECT:

	legacy submit_bio()     292MB/s write  453MB/s read
	this commit             453MB/s write  885MB/s read

It also introduces a new `zvol_blk_mq_chunks_per_thread` module
parameter. This parameter represents how many volblocksize'd chunks
to process per each zvol thread.  It can be used to tune your zvols
for better read vs write performance (higher values favor write,
lower favor read).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #13148
Issue #12483
2022-06-09 08:10:38 -06:00

419 lines
11 KiB
Plaintext
Raw Blame History

dnl #
dnl # 2.6.39 API change,
dnl # blk_start_plug() and blk_finish_plug()
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_PLUG], [
ZFS_LINUX_TEST_SRC([blk_plug], [
#include <linux/blkdev.h>
],[
struct blk_plug plug __attribute__ ((unused));
blk_start_plug(&plug);
blk_finish_plug(&plug);
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_PLUG], [
AC_MSG_CHECKING([whether struct blk_plug is available])
ZFS_LINUX_TEST_RESULT([blk_plug], [
AC_MSG_RESULT(yes)
],[
ZFS_LINUX_TEST_ERROR([blk_plug])
])
])
dnl #
dnl # 2.6.32 - 4.11: statically allocated bdi in request_queue
dnl # 4.12: dynamically allocated bdi in request_queue
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_BDI], [
ZFS_LINUX_TEST_SRC([blk_queue_bdi], [
#include <linux/blkdev.h>
],[
struct request_queue q;
struct backing_dev_info bdi;
q.backing_dev_info = &bdi;
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_BDI], [
AC_MSG_CHECKING([whether blk_queue bdi is dynamic])
ZFS_LINUX_TEST_RESULT([blk_queue_bdi], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_BDI_DYNAMIC, 1,
[blk queue backing_dev_info is dynamic])
],[
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 5.9: added blk_queue_update_readahead(),
dnl # 5.15: renamed to disk_update_readahead()
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_UPDATE_READAHEAD], [
ZFS_LINUX_TEST_SRC([blk_queue_update_readahead], [
#include <linux/blkdev.h>
],[
struct request_queue q;
blk_queue_update_readahead(&q);
])
ZFS_LINUX_TEST_SRC([disk_update_readahead], [
#include <linux/blkdev.h>
],[
struct gendisk disk;
disk_update_readahead(&disk);
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_UPDATE_READAHEAD], [
AC_MSG_CHECKING([whether blk_queue_update_readahead() exists])
ZFS_LINUX_TEST_RESULT([blk_queue_update_readahead], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_UPDATE_READAHEAD, 1,
[blk_queue_update_readahead() exists])
],[
AC_MSG_RESULT(no)
AC_MSG_CHECKING([whether disk_update_readahead() exists])
ZFS_LINUX_TEST_RESULT([disk_update_readahead], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_DISK_UPDATE_READAHEAD, 1,
[disk_update_readahead() exists])
],[
AC_MSG_RESULT(no)
])
])
])
dnl #
dnl # 5.19: bdev_max_discard_sectors() available
dnl # 2.6.32: blk_queue_discard() available
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_DISCARD], [
ZFS_LINUX_TEST_SRC([bdev_max_discard_sectors], [
#include <linux/blkdev.h>
],[
struct block_device *bdev __attribute__ ((unused)) = NULL;
unsigned int error __attribute__ ((unused));
error = bdev_max_discard_sectors(bdev);
])
ZFS_LINUX_TEST_SRC([blk_queue_discard], [
#include <linux/blkdev.h>
],[
struct request_queue r;
struct request_queue *q = &r;
int value __attribute__ ((unused));
memset(q, 0, sizeof(r));
value = blk_queue_discard(q);
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_DISCARD], [
AC_MSG_CHECKING([whether bdev_max_discard_sectors() is available])
ZFS_LINUX_TEST_RESULT([bdev_max_discard_sectors], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BDEV_MAX_DISCARD_SECTORS, 1,
[bdev_max_discard_sectors() is available])
],[
AC_MSG_RESULT(no)
AC_MSG_CHECKING([whether blk_queue_discard() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_discard], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_DISCARD, 1,
[blk_queue_discard() is available])
],[
ZFS_LINUX_TEST_ERROR([blk_queue_discard])
])
])
])
dnl #
dnl # 5.19: bdev_max_secure_erase_sectors() available
dnl # 4.8: blk_queue_secure_erase() available
dnl # 2.6.36: blk_queue_secdiscard() available
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_SECURE_ERASE], [
ZFS_LINUX_TEST_SRC([bdev_max_secure_erase_sectors], [
#include <linux/blkdev.h>
],[
struct block_device *bdev __attribute__ ((unused)) = NULL;
unsigned int error __attribute__ ((unused));
error = bdev_max_secure_erase_sectors(bdev);
])
ZFS_LINUX_TEST_SRC([blk_queue_secure_erase], [
#include <linux/blkdev.h>
],[
struct request_queue r;
struct request_queue *q = &r;
int value __attribute__ ((unused));
memset(q, 0, sizeof(r));
value = blk_queue_secure_erase(q);
])
ZFS_LINUX_TEST_SRC([blk_queue_secdiscard], [
#include <linux/blkdev.h>
],[
struct request_queue r;
struct request_queue *q = &r;
int value __attribute__ ((unused));
memset(q, 0, sizeof(r));
value = blk_queue_secdiscard(q);
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_SECURE_ERASE], [
AC_MSG_CHECKING([whether bdev_max_secure_erase_sectors() is available])
ZFS_LINUX_TEST_RESULT([bdev_max_secure_erase_sectors], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BDEV_MAX_SECURE_ERASE_SECTORS, 1,
[bdev_max_secure_erase_sectors() is available])
],[
AC_MSG_RESULT(no)
AC_MSG_CHECKING([whether blk_queue_secure_erase() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_secure_erase], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_SECURE_ERASE, 1,
[blk_queue_secure_erase() is available])
],[
AC_MSG_RESULT(no)
AC_MSG_CHECKING([whether blk_queue_secdiscard() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_secdiscard], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_SECDISCARD, 1,
[blk_queue_secdiscard() is available])
],[
ZFS_LINUX_TEST_ERROR([blk_queue_secure_erase])
])
])
])
])
dnl #
dnl # 4.16 API change,
dnl # Introduction of blk_queue_flag_set and blk_queue_flag_clear
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLAG_SET], [
ZFS_LINUX_TEST_SRC([blk_queue_flag_set], [
#include <linux/kernel.h>
#include <linux/blkdev.h>
],[
struct request_queue *q = NULL;
blk_queue_flag_set(0, q);
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_FLAG_SET], [
AC_MSG_CHECKING([whether blk_queue_flag_set() exists])
ZFS_LINUX_TEST_RESULT([blk_queue_flag_set], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_FLAG_SET, 1,
[blk_queue_flag_set() exists])
],[
AC_MSG_RESULT(no)
])
])
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLAG_CLEAR], [
ZFS_LINUX_TEST_SRC([blk_queue_flag_clear], [
#include <linux/kernel.h>
#include <linux/blkdev.h>
],[
struct request_queue *q = NULL;
blk_queue_flag_clear(0, q);
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_FLAG_CLEAR], [
AC_MSG_CHECKING([whether blk_queue_flag_clear() exists])
ZFS_LINUX_TEST_RESULT([blk_queue_flag_clear], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_FLAG_CLEAR, 1,
[blk_queue_flag_clear() exists])
],[
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 2.6.36 API change,
dnl # Added blk_queue_flush() interface, while the previous interface
dnl # was available to all the new one is GPL-only. Thus in addition to
dnl # detecting if this function is available we determine if it is
dnl # GPL-only. If the GPL-only interface is there we implement our own
dnl # compatibility function, otherwise we use the function. The hope
dnl # is that long term this function will be opened up.
dnl #
dnl # 4.7 API change,
dnl # Replace blk_queue_flush with blk_queue_write_cache
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLUSH], [
ZFS_LINUX_TEST_SRC([blk_queue_flush], [
#include <linux/blkdev.h>
], [
struct request_queue *q __attribute__ ((unused)) = NULL;
(void) blk_queue_flush(q, REQ_FLUSH);
], [], [ZFS_META_LICENSE])
ZFS_LINUX_TEST_SRC([blk_queue_write_cache], [
#include <linux/kernel.h>
#include <linux/blkdev.h>
], [
struct request_queue *q __attribute__ ((unused)) = NULL;
blk_queue_write_cache(q, true, true);
], [], [ZFS_META_LICENSE])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_FLUSH], [
AC_MSG_CHECKING([whether blk_queue_flush() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_flush], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_FLUSH, 1,
[blk_queue_flush() is available])
AC_MSG_CHECKING([whether blk_queue_flush() is GPL-only])
ZFS_LINUX_TEST_RESULT([blk_queue_flush_license], [
AC_MSG_RESULT(no)
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_FLUSH_GPL_ONLY, 1,
[blk_queue_flush() is GPL-only])
])
],[
AC_MSG_RESULT(no)
])
dnl #
dnl # 4.7 API change
dnl # Replace blk_queue_flush with blk_queue_write_cache
dnl #
AC_MSG_CHECKING([whether blk_queue_write_cache() exists])
ZFS_LINUX_TEST_RESULT([blk_queue_write_cache], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_WRITE_CACHE, 1,
[blk_queue_write_cache() exists])
AC_MSG_CHECKING([whether blk_queue_write_cache() is GPL-only])
ZFS_LINUX_TEST_RESULT([blk_queue_write_cache_license], [
AC_MSG_RESULT(no)
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY, 1,
[blk_queue_write_cache() is GPL-only])
])
],[
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 2.6.34 API change
dnl # blk_queue_max_hw_sectors() replaces blk_queue_max_sectors().
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_HW_SECTORS], [
ZFS_LINUX_TEST_SRC([blk_queue_max_hw_sectors], [
#include <linux/blkdev.h>
], [
struct request_queue *q __attribute__ ((unused)) = NULL;
(void) blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS);
], [])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS], [
AC_MSG_CHECKING([whether blk_queue_max_hw_sectors() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_max_hw_sectors], [
AC_MSG_RESULT(yes)
],[
ZFS_LINUX_TEST_ERROR([blk_queue_max_hw_sectors])
])
])
dnl #
dnl # 2.6.34 API change
dnl # blk_queue_max_segments() consolidates blk_queue_max_hw_segments()
dnl # and blk_queue_max_phys_segments().
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_SEGMENTS], [
ZFS_LINUX_TEST_SRC([blk_queue_max_segments], [
#include <linux/blkdev.h>
], [
struct request_queue *q __attribute__ ((unused)) = NULL;
(void) blk_queue_max_segments(q, BLK_MAX_SEGMENTS);
], [])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS], [
AC_MSG_CHECKING([whether blk_queue_max_segments() is available])
ZFS_LINUX_TEST_RESULT([blk_queue_max_segments], [
AC_MSG_RESULT(yes)
], [
ZFS_LINUX_TEST_ERROR([blk_queue_max_segments])
])
])
dnl #
dnl # See if kernel supports block multi-queue and blk_status_t.
dnl # blk_status_t represents the new status codes introduced in the 4.13
dnl # kernel patch:
dnl #
dnl # block: introduce new block status code type
dnl #
dnl # We do not currently support the "old" block multi-queue interfaces from
dnl # prior kernels.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_MQ], [
ZFS_LINUX_TEST_SRC([blk_mq], [
#include <linux/blk-mq.h>
], [
struct blk_mq_tag_set tag_set __attribute__ ((unused)) = {0};
(void) blk_mq_alloc_tag_set(&tag_set);
return BLK_STS_OK;
], [])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_MQ], [
AC_MSG_CHECKING([whether block multiqueue with blk_status_t is available])
ZFS_LINUX_TEST_RESULT([blk_mq], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_MQ, 1, [block multiqueue is available])
], [
AC_MSG_RESULT(no)
])
])
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE], [
ZFS_AC_KERNEL_SRC_BLK_QUEUE_PLUG
ZFS_AC_KERNEL_SRC_BLK_QUEUE_BDI
ZFS_AC_KERNEL_SRC_BLK_QUEUE_UPDATE_READAHEAD
ZFS_AC_KERNEL_SRC_BLK_QUEUE_DISCARD
ZFS_AC_KERNEL_SRC_BLK_QUEUE_SECURE_ERASE
ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLAG_SET
ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLAG_CLEAR
ZFS_AC_KERNEL_SRC_BLK_QUEUE_FLUSH
ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_HW_SECTORS
ZFS_AC_KERNEL_SRC_BLK_QUEUE_MAX_SEGMENTS
ZFS_AC_KERNEL_SRC_BLK_MQ
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE], [
ZFS_AC_KERNEL_BLK_QUEUE_PLUG
ZFS_AC_KERNEL_BLK_QUEUE_BDI
ZFS_AC_KERNEL_BLK_QUEUE_UPDATE_READAHEAD
ZFS_AC_KERNEL_BLK_QUEUE_DISCARD
ZFS_AC_KERNEL_BLK_QUEUE_SECURE_ERASE
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_SET
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_CLEAR
ZFS_AC_KERNEL_BLK_QUEUE_FLUSH
ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS
ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS
ZFS_AC_KERNEL_BLK_MQ
])
Reference in New Issue View Git Blame Copy Permalink