mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-17 18:11:00 +03:00
09b85f2ded
In order to validate the gang block code ztest is configured to artificially force a fraction of large blocks to be written as gang blocks. The default setting chosen for this was to write 25% of all blocks 32k or larger using gang blocks. The confluence of an unrealistically large number of gang blocks, the aggressive fault injection done by ztest, and the split segment reconstruction logic introduced by device removal has resulted in the following type of failure: zdb -bccsv -G -d ... exit code 3 Specifically, zdb was unable to open the pool because it was unable to reconstruct a damaged block. Manual investigation of multiple failures clearly showed that the block could be reconstructed. However, due to the large number of damaged segments (>35) it could not be done in the allotted time. Furthermore, the large number of gang blocks was determined to be the reason for the unrealistically large number of damaged segments. In order to make this situation less likely, this change both increases the forced gang block size to 64k and reduces the frequency to 3% of blocks. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8080
4320 lines
125 KiB
C
4320 lines
125 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2011, 2018 by Delphix. All rights reserved.
|
|
* Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
|
|
* Copyright (c) 2017, Intel Corporation.
|
|
*/
|
|
|
|
#include <sys/zfs_context.h>
|
|
#include <sys/dmu.h>
|
|
#include <sys/dmu_tx.h>
|
|
#include <sys/space_map.h>
|
|
#include <sys/metaslab_impl.h>
|
|
#include <sys/vdev_impl.h>
|
|
#include <sys/zio.h>
|
|
#include <sys/spa_impl.h>
|
|
#include <sys/zfeature.h>
|
|
#include <sys/vdev_indirect_mapping.h>
|
|
#include <sys/zap.h>
|
|
|
|
#define WITH_DF_BLOCK_ALLOCATOR
|
|
|
|
#define GANG_ALLOCATION(flags) \
|
|
((flags) & (METASLAB_GANG_CHILD | METASLAB_GANG_HEADER))
|
|
|
|
/*
|
|
* Metaslab granularity, in bytes. This is roughly similar to what would be
|
|
* referred to as the "stripe size" in traditional RAID arrays. In normal
|
|
* operation, we will try to write this amount of data to a top-level vdev
|
|
* before moving on to the next one.
|
|
*/
|
|
unsigned long metaslab_aliquot = 512 << 10;
|
|
|
|
/*
|
|
* For testing, make some blocks above a certain size be gang blocks.
|
|
*/
|
|
unsigned long metaslab_force_ganging = SPA_MAXBLOCKSIZE + 1;
|
|
|
|
/*
|
|
* Since we can touch multiple metaslabs (and their respective space maps)
|
|
* with each transaction group, we benefit from having a smaller space map
|
|
* block size since it allows us to issue more I/O operations scattered
|
|
* around the disk.
|
|
*/
|
|
int zfs_metaslab_sm_blksz = (1 << 12);
|
|
|
|
/*
|
|
* The in-core space map representation is more compact than its on-disk form.
|
|
* The zfs_condense_pct determines how much more compact the in-core
|
|
* space map representation must be before we compact it on-disk.
|
|
* Values should be greater than or equal to 100.
|
|
*/
|
|
int zfs_condense_pct = 200;
|
|
|
|
/*
|
|
* Condensing a metaslab is not guaranteed to actually reduce the amount of
|
|
* space used on disk. In particular, a space map uses data in increments of
|
|
* MAX(1 << ashift, space_map_blksz), so a metaslab might use the
|
|
* same number of blocks after condensing. Since the goal of condensing is to
|
|
* reduce the number of IOPs required to read the space map, we only want to
|
|
* condense when we can be sure we will reduce the number of blocks used by the
|
|
* space map. Unfortunately, we cannot precisely compute whether or not this is
|
|
* the case in metaslab_should_condense since we are holding ms_lock. Instead,
|
|
* we apply the following heuristic: do not condense a spacemap unless the
|
|
* uncondensed size consumes greater than zfs_metaslab_condense_block_threshold
|
|
* blocks.
|
|
*/
|
|
int zfs_metaslab_condense_block_threshold = 4;
|
|
|
|
/*
|
|
* The zfs_mg_noalloc_threshold defines which metaslab groups should
|
|
* be eligible for allocation. The value is defined as a percentage of
|
|
* free space. Metaslab groups that have more free space than
|
|
* zfs_mg_noalloc_threshold are always eligible for allocations. Once
|
|
* a metaslab group's free space is less than or equal to the
|
|
* zfs_mg_noalloc_threshold the allocator will avoid allocating to that
|
|
* group unless all groups in the pool have reached zfs_mg_noalloc_threshold.
|
|
* Once all groups in the pool reach zfs_mg_noalloc_threshold then all
|
|
* groups are allowed to accept allocations. Gang blocks are always
|
|
* eligible to allocate on any metaslab group. The default value of 0 means
|
|
* no metaslab group will be excluded based on this criterion.
|
|
*/
|
|
int zfs_mg_noalloc_threshold = 0;
|
|
|
|
/*
|
|
* Metaslab groups are considered eligible for allocations if their
|
|
* fragmenation metric (measured as a percentage) is less than or equal to
|
|
* zfs_mg_fragmentation_threshold. If a metaslab group exceeds this threshold
|
|
* then it will be skipped unless all metaslab groups within the metaslab
|
|
* class have also crossed this threshold.
|
|
*/
|
|
int zfs_mg_fragmentation_threshold = 85;
|
|
|
|
/*
|
|
* Allow metaslabs to keep their active state as long as their fragmentation
|
|
* percentage is less than or equal to zfs_metaslab_fragmentation_threshold. An
|
|
* active metaslab that exceeds this threshold will no longer keep its active
|
|
* status allowing better metaslabs to be selected.
|
|
*/
|
|
int zfs_metaslab_fragmentation_threshold = 70;
|
|
|
|
/*
|
|
* When set will load all metaslabs when pool is first opened.
|
|
*/
|
|
int metaslab_debug_load = 0;
|
|
|
|
/*
|
|
* When set will prevent metaslabs from being unloaded.
|
|
*/
|
|
int metaslab_debug_unload = 0;
|
|
|
|
/*
|
|
* Minimum size which forces the dynamic allocator to change
|
|
* it's allocation strategy. Once the space map cannot satisfy
|
|
* an allocation of this size then it switches to using more
|
|
* aggressive strategy (i.e search by size rather than offset).
|
|
*/
|
|
uint64_t metaslab_df_alloc_threshold = SPA_OLD_MAXBLOCKSIZE;
|
|
|
|
/*
|
|
* The minimum free space, in percent, which must be available
|
|
* in a space map to continue allocations in a first-fit fashion.
|
|
* Once the space map's free space drops below this level we dynamically
|
|
* switch to using best-fit allocations.
|
|
*/
|
|
int metaslab_df_free_pct = 4;
|
|
|
|
/*
|
|
* Percentage of all cpus that can be used by the metaslab taskq.
|
|
*/
|
|
int metaslab_load_pct = 50;
|
|
|
|
/*
|
|
* Determines how many txgs a metaslab may remain loaded without having any
|
|
* allocations from it. As long as a metaslab continues to be used we will
|
|
* keep it loaded.
|
|
*/
|
|
int metaslab_unload_delay = TXG_SIZE * 2;
|
|
|
|
/*
|
|
* Max number of metaslabs per group to preload.
|
|
*/
|
|
int metaslab_preload_limit = SPA_DVAS_PER_BP;
|
|
|
|
/*
|
|
* Enable/disable preloading of metaslab.
|
|
*/
|
|
int metaslab_preload_enabled = B_TRUE;
|
|
|
|
/*
|
|
* Enable/disable fragmentation weighting on metaslabs.
|
|
*/
|
|
int metaslab_fragmentation_factor_enabled = B_TRUE;
|
|
|
|
/*
|
|
* Enable/disable lba weighting (i.e. outer tracks are given preference).
|
|
*/
|
|
int metaslab_lba_weighting_enabled = B_TRUE;
|
|
|
|
/*
|
|
* Enable/disable metaslab group biasing.
|
|
*/
|
|
int metaslab_bias_enabled = B_TRUE;
|
|
|
|
|
|
/*
|
|
* Enable/disable remapping of indirect DVAs to their concrete vdevs.
|
|
*/
|
|
boolean_t zfs_remap_blkptr_enable = B_TRUE;
|
|
|
|
/*
|
|
* Enable/disable segment-based metaslab selection.
|
|
*/
|
|
int zfs_metaslab_segment_weight_enabled = B_TRUE;
|
|
|
|
/*
|
|
* When using segment-based metaslab selection, we will continue
|
|
* allocating from the active metaslab until we have exhausted
|
|
* zfs_metaslab_switch_threshold of its buckets.
|
|
*/
|
|
int zfs_metaslab_switch_threshold = 2;
|
|
|
|
/*
|
|
* Internal switch to enable/disable the metaslab allocation tracing
|
|
* facility.
|
|
*/
|
|
#ifdef _METASLAB_TRACING
|
|
boolean_t metaslab_trace_enabled = B_TRUE;
|
|
#endif
|
|
|
|
/*
|
|
* Maximum entries that the metaslab allocation tracing facility will keep
|
|
* in a given list when running in non-debug mode. We limit the number
|
|
* of entries in non-debug mode to prevent us from using up too much memory.
|
|
* The limit should be sufficiently large that we don't expect any allocation
|
|
* to every exceed this value. In debug mode, the system will panic if this
|
|
* limit is ever reached allowing for further investigation.
|
|
*/
|
|
#ifdef _METASLAB_TRACING
|
|
uint64_t metaslab_trace_max_entries = 5000;
|
|
#endif
|
|
|
|
static uint64_t metaslab_weight(metaslab_t *);
|
|
static void metaslab_set_fragmentation(metaslab_t *);
|
|
static void metaslab_free_impl(vdev_t *, uint64_t, uint64_t, boolean_t);
|
|
static void metaslab_check_free_impl(vdev_t *, uint64_t, uint64_t);
|
|
|
|
static void metaslab_passivate(metaslab_t *msp, uint64_t weight);
|
|
static uint64_t metaslab_weight_from_range_tree(metaslab_t *msp);
|
|
#ifdef _METASLAB_TRACING
|
|
kmem_cache_t *metaslab_alloc_trace_cache;
|
|
#endif
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Metaslab classes
|
|
* ==========================================================================
|
|
*/
|
|
metaslab_class_t *
|
|
metaslab_class_create(spa_t *spa, metaslab_ops_t *ops)
|
|
{
|
|
metaslab_class_t *mc;
|
|
|
|
mc = kmem_zalloc(sizeof (metaslab_class_t), KM_SLEEP);
|
|
|
|
mc->mc_spa = spa;
|
|
mc->mc_rotor = NULL;
|
|
mc->mc_ops = ops;
|
|
mutex_init(&mc->mc_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
mc->mc_alloc_slots = kmem_zalloc(spa->spa_alloc_count *
|
|
sizeof (zfs_refcount_t), KM_SLEEP);
|
|
mc->mc_alloc_max_slots = kmem_zalloc(spa->spa_alloc_count *
|
|
sizeof (uint64_t), KM_SLEEP);
|
|
for (int i = 0; i < spa->spa_alloc_count; i++)
|
|
zfs_refcount_create_tracked(&mc->mc_alloc_slots[i]);
|
|
|
|
return (mc);
|
|
}
|
|
|
|
void
|
|
metaslab_class_destroy(metaslab_class_t *mc)
|
|
{
|
|
ASSERT(mc->mc_rotor == NULL);
|
|
ASSERT(mc->mc_alloc == 0);
|
|
ASSERT(mc->mc_deferred == 0);
|
|
ASSERT(mc->mc_space == 0);
|
|
ASSERT(mc->mc_dspace == 0);
|
|
|
|
for (int i = 0; i < mc->mc_spa->spa_alloc_count; i++)
|
|
zfs_refcount_destroy(&mc->mc_alloc_slots[i]);
|
|
kmem_free(mc->mc_alloc_slots, mc->mc_spa->spa_alloc_count *
|
|
sizeof (zfs_refcount_t));
|
|
kmem_free(mc->mc_alloc_max_slots, mc->mc_spa->spa_alloc_count *
|
|
sizeof (uint64_t));
|
|
mutex_destroy(&mc->mc_lock);
|
|
kmem_free(mc, sizeof (metaslab_class_t));
|
|
}
|
|
|
|
int
|
|
metaslab_class_validate(metaslab_class_t *mc)
|
|
{
|
|
metaslab_group_t *mg;
|
|
vdev_t *vd;
|
|
|
|
/*
|
|
* Must hold one of the spa_config locks.
|
|
*/
|
|
ASSERT(spa_config_held(mc->mc_spa, SCL_ALL, RW_READER) ||
|
|
spa_config_held(mc->mc_spa, SCL_ALL, RW_WRITER));
|
|
|
|
if ((mg = mc->mc_rotor) == NULL)
|
|
return (0);
|
|
|
|
do {
|
|
vd = mg->mg_vd;
|
|
ASSERT(vd->vdev_mg != NULL);
|
|
ASSERT3P(vd->vdev_top, ==, vd);
|
|
ASSERT3P(mg->mg_class, ==, mc);
|
|
ASSERT3P(vd->vdev_ops, !=, &vdev_hole_ops);
|
|
} while ((mg = mg->mg_next) != mc->mc_rotor);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
metaslab_class_space_update(metaslab_class_t *mc, int64_t alloc_delta,
|
|
int64_t defer_delta, int64_t space_delta, int64_t dspace_delta)
|
|
{
|
|
atomic_add_64(&mc->mc_alloc, alloc_delta);
|
|
atomic_add_64(&mc->mc_deferred, defer_delta);
|
|
atomic_add_64(&mc->mc_space, space_delta);
|
|
atomic_add_64(&mc->mc_dspace, dspace_delta);
|
|
}
|
|
|
|
uint64_t
|
|
metaslab_class_get_alloc(metaslab_class_t *mc)
|
|
{
|
|
return (mc->mc_alloc);
|
|
}
|
|
|
|
uint64_t
|
|
metaslab_class_get_deferred(metaslab_class_t *mc)
|
|
{
|
|
return (mc->mc_deferred);
|
|
}
|
|
|
|
uint64_t
|
|
metaslab_class_get_space(metaslab_class_t *mc)
|
|
{
|
|
return (mc->mc_space);
|
|
}
|
|
|
|
uint64_t
|
|
metaslab_class_get_dspace(metaslab_class_t *mc)
|
|
{
|
|
return (spa_deflate(mc->mc_spa) ? mc->mc_dspace : mc->mc_space);
|
|
}
|
|
|
|
void
|
|
metaslab_class_histogram_verify(metaslab_class_t *mc)
|
|
{
|
|
spa_t *spa = mc->mc_spa;
|
|
vdev_t *rvd = spa->spa_root_vdev;
|
|
uint64_t *mc_hist;
|
|
int i;
|
|
|
|
if ((zfs_flags & ZFS_DEBUG_HISTOGRAM_VERIFY) == 0)
|
|
return;
|
|
|
|
mc_hist = kmem_zalloc(sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE,
|
|
KM_SLEEP);
|
|
|
|
for (int c = 0; c < rvd->vdev_children; c++) {
|
|
vdev_t *tvd = rvd->vdev_child[c];
|
|
metaslab_group_t *mg = tvd->vdev_mg;
|
|
|
|
/*
|
|
* Skip any holes, uninitialized top-levels, or
|
|
* vdevs that are not in this metalab class.
|
|
*/
|
|
if (!vdev_is_concrete(tvd) || tvd->vdev_ms_shift == 0 ||
|
|
mg->mg_class != mc) {
|
|
continue;
|
|
}
|
|
|
|
for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++)
|
|
mc_hist[i] += mg->mg_histogram[i];
|
|
}
|
|
|
|
for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++)
|
|
VERIFY3U(mc_hist[i], ==, mc->mc_histogram[i]);
|
|
|
|
kmem_free(mc_hist, sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Calculate the metaslab class's fragmentation metric. The metric
|
|
* is weighted based on the space contribution of each metaslab group.
|
|
* The return value will be a number between 0 and 100 (inclusive), or
|
|
* ZFS_FRAG_INVALID if the metric has not been set. See comment above the
|
|
* zfs_frag_table for more information about the metric.
|
|
*/
|
|
uint64_t
|
|
metaslab_class_fragmentation(metaslab_class_t *mc)
|
|
{
|
|
vdev_t *rvd = mc->mc_spa->spa_root_vdev;
|
|
uint64_t fragmentation = 0;
|
|
|
|
spa_config_enter(mc->mc_spa, SCL_VDEV, FTAG, RW_READER);
|
|
|
|
for (int c = 0; c < rvd->vdev_children; c++) {
|
|
vdev_t *tvd = rvd->vdev_child[c];
|
|
metaslab_group_t *mg = tvd->vdev_mg;
|
|
|
|
/*
|
|
* Skip any holes, uninitialized top-levels,
|
|
* or vdevs that are not in this metalab class.
|
|
*/
|
|
if (!vdev_is_concrete(tvd) || tvd->vdev_ms_shift == 0 ||
|
|
mg->mg_class != mc) {
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If a metaslab group does not contain a fragmentation
|
|
* metric then just bail out.
|
|
*/
|
|
if (mg->mg_fragmentation == ZFS_FRAG_INVALID) {
|
|
spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
|
|
return (ZFS_FRAG_INVALID);
|
|
}
|
|
|
|
/*
|
|
* Determine how much this metaslab_group is contributing
|
|
* to the overall pool fragmentation metric.
|
|
*/
|
|
fragmentation += mg->mg_fragmentation *
|
|
metaslab_group_get_space(mg);
|
|
}
|
|
fragmentation /= metaslab_class_get_space(mc);
|
|
|
|
ASSERT3U(fragmentation, <=, 100);
|
|
spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
|
|
return (fragmentation);
|
|
}
|
|
|
|
/*
|
|
* Calculate the amount of expandable space that is available in
|
|
* this metaslab class. If a device is expanded then its expandable
|
|
* space will be the amount of allocatable space that is currently not
|
|
* part of this metaslab class.
|
|
*/
|
|
uint64_t
|
|
metaslab_class_expandable_space(metaslab_class_t *mc)
|
|
{
|
|
vdev_t *rvd = mc->mc_spa->spa_root_vdev;
|
|
uint64_t space = 0;
|
|
|
|
spa_config_enter(mc->mc_spa, SCL_VDEV, FTAG, RW_READER);
|
|
for (int c = 0; c < rvd->vdev_children; c++) {
|
|
vdev_t *tvd = rvd->vdev_child[c];
|
|
metaslab_group_t *mg = tvd->vdev_mg;
|
|
|
|
if (!vdev_is_concrete(tvd) || tvd->vdev_ms_shift == 0 ||
|
|
mg->mg_class != mc) {
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Calculate if we have enough space to add additional
|
|
* metaslabs. We report the expandable space in terms
|
|
* of the metaslab size since that's the unit of expansion.
|
|
*/
|
|
space += P2ALIGN(tvd->vdev_max_asize - tvd->vdev_asize,
|
|
1ULL << tvd->vdev_ms_shift);
|
|
}
|
|
spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
|
|
return (space);
|
|
}
|
|
|
|
static int
|
|
metaslab_compare(const void *x1, const void *x2)
|
|
{
|
|
const metaslab_t *m1 = (const metaslab_t *)x1;
|
|
const metaslab_t *m2 = (const metaslab_t *)x2;
|
|
|
|
int sort1 = 0;
|
|
int sort2 = 0;
|
|
if (m1->ms_allocator != -1 && m1->ms_primary)
|
|
sort1 = 1;
|
|
else if (m1->ms_allocator != -1 && !m1->ms_primary)
|
|
sort1 = 2;
|
|
if (m2->ms_allocator != -1 && m2->ms_primary)
|
|
sort2 = 1;
|
|
else if (m2->ms_allocator != -1 && !m2->ms_primary)
|
|
sort2 = 2;
|
|
|
|
/*
|
|
* Sort inactive metaslabs first, then primaries, then secondaries. When
|
|
* selecting a metaslab to allocate from, an allocator first tries its
|
|
* primary, then secondary active metaslab. If it doesn't have active
|
|
* metaslabs, or can't allocate from them, it searches for an inactive
|
|
* metaslab to activate. If it can't find a suitable one, it will steal
|
|
* a primary or secondary metaslab from another allocator.
|
|
*/
|
|
if (sort1 < sort2)
|
|
return (-1);
|
|
if (sort1 > sort2)
|
|
return (1);
|
|
|
|
int cmp = AVL_CMP(m2->ms_weight, m1->ms_weight);
|
|
if (likely(cmp))
|
|
return (cmp);
|
|
|
|
IMPLY(AVL_CMP(m1->ms_start, m2->ms_start) == 0, m1 == m2);
|
|
|
|
return (AVL_CMP(m1->ms_start, m2->ms_start));
|
|
}
|
|
|
|
/*
|
|
* Verify that the space accounting on disk matches the in-core range_trees.
|
|
*/
|
|
void
|
|
metaslab_verify_space(metaslab_t *msp, uint64_t txg)
|
|
{
|
|
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
|
|
uint64_t allocated = 0;
|
|
uint64_t sm_free_space, msp_free_space;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
|
|
if ((zfs_flags & ZFS_DEBUG_METASLAB_VERIFY) == 0)
|
|
return;
|
|
|
|
/*
|
|
* We can only verify the metaslab space when we're called
|
|
* from syncing context with a loaded metaslab that has an allocated
|
|
* space map. Calling this in non-syncing context does not
|
|
* provide a consistent view of the metaslab since we're performing
|
|
* allocations in the future.
|
|
*/
|
|
if (txg != spa_syncing_txg(spa) || msp->ms_sm == NULL ||
|
|
!msp->ms_loaded)
|
|
return;
|
|
|
|
sm_free_space = msp->ms_size - space_map_allocated(msp->ms_sm) -
|
|
space_map_alloc_delta(msp->ms_sm);
|
|
|
|
/*
|
|
* Account for future allocations since we would have already
|
|
* deducted that space from the ms_freetree.
|
|
*/
|
|
for (int t = 0; t < TXG_CONCURRENT_STATES; t++) {
|
|
allocated +=
|
|
range_tree_space(msp->ms_allocating[(txg + t) & TXG_MASK]);
|
|
}
|
|
|
|
msp_free_space = range_tree_space(msp->ms_allocatable) + allocated +
|
|
msp->ms_deferspace + range_tree_space(msp->ms_freed);
|
|
|
|
VERIFY3U(sm_free_space, ==, msp_free_space);
|
|
}
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Metaslab groups
|
|
* ==========================================================================
|
|
*/
|
|
/*
|
|
* Update the allocatable flag and the metaslab group's capacity.
|
|
* The allocatable flag is set to true if the capacity is below
|
|
* the zfs_mg_noalloc_threshold or has a fragmentation value that is
|
|
* greater than zfs_mg_fragmentation_threshold. If a metaslab group
|
|
* transitions from allocatable to non-allocatable or vice versa then the
|
|
* metaslab group's class is updated to reflect the transition.
|
|
*/
|
|
static void
|
|
metaslab_group_alloc_update(metaslab_group_t *mg)
|
|
{
|
|
vdev_t *vd = mg->mg_vd;
|
|
metaslab_class_t *mc = mg->mg_class;
|
|
vdev_stat_t *vs = &vd->vdev_stat;
|
|
boolean_t was_allocatable;
|
|
boolean_t was_initialized;
|
|
|
|
ASSERT(vd == vd->vdev_top);
|
|
ASSERT3U(spa_config_held(mc->mc_spa, SCL_ALLOC, RW_READER), ==,
|
|
SCL_ALLOC);
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
was_allocatable = mg->mg_allocatable;
|
|
was_initialized = mg->mg_initialized;
|
|
|
|
mg->mg_free_capacity = ((vs->vs_space - vs->vs_alloc) * 100) /
|
|
(vs->vs_space + 1);
|
|
|
|
mutex_enter(&mc->mc_lock);
|
|
|
|
/*
|
|
* If the metaslab group was just added then it won't
|
|
* have any space until we finish syncing out this txg.
|
|
* At that point we will consider it initialized and available
|
|
* for allocations. We also don't consider non-activated
|
|
* metaslab groups (e.g. vdevs that are in the middle of being removed)
|
|
* to be initialized, because they can't be used for allocation.
|
|
*/
|
|
mg->mg_initialized = metaslab_group_initialized(mg);
|
|
if (!was_initialized && mg->mg_initialized) {
|
|
mc->mc_groups++;
|
|
} else if (was_initialized && !mg->mg_initialized) {
|
|
ASSERT3U(mc->mc_groups, >, 0);
|
|
mc->mc_groups--;
|
|
}
|
|
if (mg->mg_initialized)
|
|
mg->mg_no_free_space = B_FALSE;
|
|
|
|
/*
|
|
* A metaslab group is considered allocatable if it has plenty
|
|
* of free space or is not heavily fragmented. We only take
|
|
* fragmentation into account if the metaslab group has a valid
|
|
* fragmentation metric (i.e. a value between 0 and 100).
|
|
*/
|
|
mg->mg_allocatable = (mg->mg_activation_count > 0 &&
|
|
mg->mg_free_capacity > zfs_mg_noalloc_threshold &&
|
|
(mg->mg_fragmentation == ZFS_FRAG_INVALID ||
|
|
mg->mg_fragmentation <= zfs_mg_fragmentation_threshold));
|
|
|
|
/*
|
|
* The mc_alloc_groups maintains a count of the number of
|
|
* groups in this metaslab class that are still above the
|
|
* zfs_mg_noalloc_threshold. This is used by the allocating
|
|
* threads to determine if they should avoid allocations to
|
|
* a given group. The allocator will avoid allocations to a group
|
|
* if that group has reached or is below the zfs_mg_noalloc_threshold
|
|
* and there are still other groups that are above the threshold.
|
|
* When a group transitions from allocatable to non-allocatable or
|
|
* vice versa we update the metaslab class to reflect that change.
|
|
* When the mc_alloc_groups value drops to 0 that means that all
|
|
* groups have reached the zfs_mg_noalloc_threshold making all groups
|
|
* eligible for allocations. This effectively means that all devices
|
|
* are balanced again.
|
|
*/
|
|
if (was_allocatable && !mg->mg_allocatable)
|
|
mc->mc_alloc_groups--;
|
|
else if (!was_allocatable && mg->mg_allocatable)
|
|
mc->mc_alloc_groups++;
|
|
mutex_exit(&mc->mc_lock);
|
|
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
metaslab_group_t *
|
|
metaslab_group_create(metaslab_class_t *mc, vdev_t *vd, int allocators)
|
|
{
|
|
metaslab_group_t *mg;
|
|
|
|
mg = kmem_zalloc(sizeof (metaslab_group_t), KM_SLEEP);
|
|
mutex_init(&mg->mg_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
mg->mg_primaries = kmem_zalloc(allocators * sizeof (metaslab_t *),
|
|
KM_SLEEP);
|
|
mg->mg_secondaries = kmem_zalloc(allocators * sizeof (metaslab_t *),
|
|
KM_SLEEP);
|
|
avl_create(&mg->mg_metaslab_tree, metaslab_compare,
|
|
sizeof (metaslab_t), offsetof(struct metaslab, ms_group_node));
|
|
mg->mg_vd = vd;
|
|
mg->mg_class = mc;
|
|
mg->mg_activation_count = 0;
|
|
mg->mg_initialized = B_FALSE;
|
|
mg->mg_no_free_space = B_TRUE;
|
|
mg->mg_allocators = allocators;
|
|
|
|
mg->mg_alloc_queue_depth = kmem_zalloc(allocators *
|
|
sizeof (zfs_refcount_t), KM_SLEEP);
|
|
mg->mg_cur_max_alloc_queue_depth = kmem_zalloc(allocators *
|
|
sizeof (uint64_t), KM_SLEEP);
|
|
for (int i = 0; i < allocators; i++) {
|
|
zfs_refcount_create_tracked(&mg->mg_alloc_queue_depth[i]);
|
|
mg->mg_cur_max_alloc_queue_depth[i] = 0;
|
|
}
|
|
|
|
mg->mg_taskq = taskq_create("metaslab_group_taskq", metaslab_load_pct,
|
|
maxclsyspri, 10, INT_MAX, TASKQ_THREADS_CPU_PCT | TASKQ_DYNAMIC);
|
|
|
|
return (mg);
|
|
}
|
|
|
|
void
|
|
metaslab_group_destroy(metaslab_group_t *mg)
|
|
{
|
|
ASSERT(mg->mg_prev == NULL);
|
|
ASSERT(mg->mg_next == NULL);
|
|
/*
|
|
* We may have gone below zero with the activation count
|
|
* either because we never activated in the first place or
|
|
* because we're done, and possibly removing the vdev.
|
|
*/
|
|
ASSERT(mg->mg_activation_count <= 0);
|
|
|
|
taskq_destroy(mg->mg_taskq);
|
|
avl_destroy(&mg->mg_metaslab_tree);
|
|
kmem_free(mg->mg_primaries, mg->mg_allocators * sizeof (metaslab_t *));
|
|
kmem_free(mg->mg_secondaries, mg->mg_allocators *
|
|
sizeof (metaslab_t *));
|
|
mutex_destroy(&mg->mg_lock);
|
|
|
|
for (int i = 0; i < mg->mg_allocators; i++) {
|
|
zfs_refcount_destroy(&mg->mg_alloc_queue_depth[i]);
|
|
mg->mg_cur_max_alloc_queue_depth[i] = 0;
|
|
}
|
|
kmem_free(mg->mg_alloc_queue_depth, mg->mg_allocators *
|
|
sizeof (zfs_refcount_t));
|
|
kmem_free(mg->mg_cur_max_alloc_queue_depth, mg->mg_allocators *
|
|
sizeof (uint64_t));
|
|
|
|
kmem_free(mg, sizeof (metaslab_group_t));
|
|
}
|
|
|
|
void
|
|
metaslab_group_activate(metaslab_group_t *mg)
|
|
{
|
|
metaslab_class_t *mc = mg->mg_class;
|
|
metaslab_group_t *mgprev, *mgnext;
|
|
|
|
ASSERT3U(spa_config_held(mc->mc_spa, SCL_ALLOC, RW_WRITER), !=, 0);
|
|
|
|
ASSERT(mc->mc_rotor != mg);
|
|
ASSERT(mg->mg_prev == NULL);
|
|
ASSERT(mg->mg_next == NULL);
|
|
ASSERT(mg->mg_activation_count <= 0);
|
|
|
|
if (++mg->mg_activation_count <= 0)
|
|
return;
|
|
|
|
mg->mg_aliquot = metaslab_aliquot * MAX(1, mg->mg_vd->vdev_children);
|
|
metaslab_group_alloc_update(mg);
|
|
|
|
if ((mgprev = mc->mc_rotor) == NULL) {
|
|
mg->mg_prev = mg;
|
|
mg->mg_next = mg;
|
|
} else {
|
|
mgnext = mgprev->mg_next;
|
|
mg->mg_prev = mgprev;
|
|
mg->mg_next = mgnext;
|
|
mgprev->mg_next = mg;
|
|
mgnext->mg_prev = mg;
|
|
}
|
|
mc->mc_rotor = mg;
|
|
}
|
|
|
|
/*
|
|
* Passivate a metaslab group and remove it from the allocation rotor.
|
|
* Callers must hold both the SCL_ALLOC and SCL_ZIO lock prior to passivating
|
|
* a metaslab group. This function will momentarily drop spa_config_locks
|
|
* that are lower than the SCL_ALLOC lock (see comment below).
|
|
*/
|
|
void
|
|
metaslab_group_passivate(metaslab_group_t *mg)
|
|
{
|
|
metaslab_class_t *mc = mg->mg_class;
|
|
spa_t *spa = mc->mc_spa;
|
|
metaslab_group_t *mgprev, *mgnext;
|
|
int locks = spa_config_held(spa, SCL_ALL, RW_WRITER);
|
|
|
|
ASSERT3U(spa_config_held(spa, SCL_ALLOC | SCL_ZIO, RW_WRITER), ==,
|
|
(SCL_ALLOC | SCL_ZIO));
|
|
|
|
if (--mg->mg_activation_count != 0) {
|
|
ASSERT(mc->mc_rotor != mg);
|
|
ASSERT(mg->mg_prev == NULL);
|
|
ASSERT(mg->mg_next == NULL);
|
|
ASSERT(mg->mg_activation_count < 0);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The spa_config_lock is an array of rwlocks, ordered as
|
|
* follows (from highest to lowest):
|
|
* SCL_CONFIG > SCL_STATE > SCL_L2ARC > SCL_ALLOC >
|
|
* SCL_ZIO > SCL_FREE > SCL_VDEV
|
|
* (For more information about the spa_config_lock see spa_misc.c)
|
|
* The higher the lock, the broader its coverage. When we passivate
|
|
* a metaslab group, we must hold both the SCL_ALLOC and the SCL_ZIO
|
|
* config locks. However, the metaslab group's taskq might be trying
|
|
* to preload metaslabs so we must drop the SCL_ZIO lock and any
|
|
* lower locks to allow the I/O to complete. At a minimum,
|
|
* we continue to hold the SCL_ALLOC lock, which prevents any future
|
|
* allocations from taking place and any changes to the vdev tree.
|
|
*/
|
|
spa_config_exit(spa, locks & ~(SCL_ZIO - 1), spa);
|
|
taskq_wait_outstanding(mg->mg_taskq, 0);
|
|
spa_config_enter(spa, locks & ~(SCL_ZIO - 1), spa, RW_WRITER);
|
|
metaslab_group_alloc_update(mg);
|
|
for (int i = 0; i < mg->mg_allocators; i++) {
|
|
metaslab_t *msp = mg->mg_primaries[i];
|
|
if (msp != NULL) {
|
|
mutex_enter(&msp->ms_lock);
|
|
metaslab_passivate(msp,
|
|
metaslab_weight_from_range_tree(msp));
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
msp = mg->mg_secondaries[i];
|
|
if (msp != NULL) {
|
|
mutex_enter(&msp->ms_lock);
|
|
metaslab_passivate(msp,
|
|
metaslab_weight_from_range_tree(msp));
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
}
|
|
|
|
mgprev = mg->mg_prev;
|
|
mgnext = mg->mg_next;
|
|
|
|
if (mg == mgnext) {
|
|
mc->mc_rotor = NULL;
|
|
} else {
|
|
mc->mc_rotor = mgnext;
|
|
mgprev->mg_next = mgnext;
|
|
mgnext->mg_prev = mgprev;
|
|
}
|
|
|
|
mg->mg_prev = NULL;
|
|
mg->mg_next = NULL;
|
|
}
|
|
|
|
boolean_t
|
|
metaslab_group_initialized(metaslab_group_t *mg)
|
|
{
|
|
vdev_t *vd = mg->mg_vd;
|
|
vdev_stat_t *vs = &vd->vdev_stat;
|
|
|
|
return (vs->vs_space != 0 && mg->mg_activation_count > 0);
|
|
}
|
|
|
|
uint64_t
|
|
metaslab_group_get_space(metaslab_group_t *mg)
|
|
{
|
|
return ((1ULL << mg->mg_vd->vdev_ms_shift) * mg->mg_vd->vdev_ms_count);
|
|
}
|
|
|
|
void
|
|
metaslab_group_histogram_verify(metaslab_group_t *mg)
|
|
{
|
|
uint64_t *mg_hist;
|
|
vdev_t *vd = mg->mg_vd;
|
|
uint64_t ashift = vd->vdev_ashift;
|
|
int i;
|
|
|
|
if ((zfs_flags & ZFS_DEBUG_HISTOGRAM_VERIFY) == 0)
|
|
return;
|
|
|
|
mg_hist = kmem_zalloc(sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE,
|
|
KM_SLEEP);
|
|
|
|
ASSERT3U(RANGE_TREE_HISTOGRAM_SIZE, >=,
|
|
SPACE_MAP_HISTOGRAM_SIZE + ashift);
|
|
|
|
for (int m = 0; m < vd->vdev_ms_count; m++) {
|
|
metaslab_t *msp = vd->vdev_ms[m];
|
|
|
|
/* skip if not active or not a member */
|
|
if (msp->ms_sm == NULL || msp->ms_group != mg)
|
|
continue;
|
|
|
|
for (i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++)
|
|
mg_hist[i + ashift] +=
|
|
msp->ms_sm->sm_phys->smp_histogram[i];
|
|
}
|
|
|
|
for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i ++)
|
|
VERIFY3U(mg_hist[i], ==, mg->mg_histogram[i]);
|
|
|
|
kmem_free(mg_hist, sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE);
|
|
}
|
|
|
|
static void
|
|
metaslab_group_histogram_add(metaslab_group_t *mg, metaslab_t *msp)
|
|
{
|
|
metaslab_class_t *mc = mg->mg_class;
|
|
uint64_t ashift = mg->mg_vd->vdev_ashift;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
if (msp->ms_sm == NULL)
|
|
return;
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
|
|
mg->mg_histogram[i + ashift] +=
|
|
msp->ms_sm->sm_phys->smp_histogram[i];
|
|
mc->mc_histogram[i + ashift] +=
|
|
msp->ms_sm->sm_phys->smp_histogram[i];
|
|
}
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
void
|
|
metaslab_group_histogram_remove(metaslab_group_t *mg, metaslab_t *msp)
|
|
{
|
|
metaslab_class_t *mc = mg->mg_class;
|
|
uint64_t ashift = mg->mg_vd->vdev_ashift;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
if (msp->ms_sm == NULL)
|
|
return;
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
|
|
ASSERT3U(mg->mg_histogram[i + ashift], >=,
|
|
msp->ms_sm->sm_phys->smp_histogram[i]);
|
|
ASSERT3U(mc->mc_histogram[i + ashift], >=,
|
|
msp->ms_sm->sm_phys->smp_histogram[i]);
|
|
|
|
mg->mg_histogram[i + ashift] -=
|
|
msp->ms_sm->sm_phys->smp_histogram[i];
|
|
mc->mc_histogram[i + ashift] -=
|
|
msp->ms_sm->sm_phys->smp_histogram[i];
|
|
}
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
static void
|
|
metaslab_group_add(metaslab_group_t *mg, metaslab_t *msp)
|
|
{
|
|
ASSERT(msp->ms_group == NULL);
|
|
mutex_enter(&mg->mg_lock);
|
|
msp->ms_group = mg;
|
|
msp->ms_weight = 0;
|
|
avl_add(&mg->mg_metaslab_tree, msp);
|
|
mutex_exit(&mg->mg_lock);
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
metaslab_group_histogram_add(mg, msp);
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
|
|
static void
|
|
metaslab_group_remove(metaslab_group_t *mg, metaslab_t *msp)
|
|
{
|
|
mutex_enter(&msp->ms_lock);
|
|
metaslab_group_histogram_remove(mg, msp);
|
|
mutex_exit(&msp->ms_lock);
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
ASSERT(msp->ms_group == mg);
|
|
avl_remove(&mg->mg_metaslab_tree, msp);
|
|
msp->ms_group = NULL;
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
static void
|
|
metaslab_group_sort_impl(metaslab_group_t *mg, metaslab_t *msp, uint64_t weight)
|
|
{
|
|
ASSERT(MUTEX_HELD(&mg->mg_lock));
|
|
ASSERT(msp->ms_group == mg);
|
|
avl_remove(&mg->mg_metaslab_tree, msp);
|
|
msp->ms_weight = weight;
|
|
avl_add(&mg->mg_metaslab_tree, msp);
|
|
|
|
}
|
|
|
|
static void
|
|
metaslab_group_sort(metaslab_group_t *mg, metaslab_t *msp, uint64_t weight)
|
|
{
|
|
/*
|
|
* Although in principle the weight can be any value, in
|
|
* practice we do not use values in the range [1, 511].
|
|
*/
|
|
ASSERT(weight >= SPA_MINBLOCKSIZE || weight == 0);
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
metaslab_group_sort_impl(mg, msp, weight);
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
/*
|
|
* Calculate the fragmentation for a given metaslab group. We can use
|
|
* a simple average here since all metaslabs within the group must have
|
|
* the same size. The return value will be a value between 0 and 100
|
|
* (inclusive), or ZFS_FRAG_INVALID if less than half of the metaslab in this
|
|
* group have a fragmentation metric.
|
|
*/
|
|
uint64_t
|
|
metaslab_group_fragmentation(metaslab_group_t *mg)
|
|
{
|
|
vdev_t *vd = mg->mg_vd;
|
|
uint64_t fragmentation = 0;
|
|
uint64_t valid_ms = 0;
|
|
|
|
for (int m = 0; m < vd->vdev_ms_count; m++) {
|
|
metaslab_t *msp = vd->vdev_ms[m];
|
|
|
|
if (msp->ms_fragmentation == ZFS_FRAG_INVALID)
|
|
continue;
|
|
if (msp->ms_group != mg)
|
|
continue;
|
|
|
|
valid_ms++;
|
|
fragmentation += msp->ms_fragmentation;
|
|
}
|
|
|
|
if (valid_ms <= mg->mg_vd->vdev_ms_count / 2)
|
|
return (ZFS_FRAG_INVALID);
|
|
|
|
fragmentation /= valid_ms;
|
|
ASSERT3U(fragmentation, <=, 100);
|
|
return (fragmentation);
|
|
}
|
|
|
|
/*
|
|
* Determine if a given metaslab group should skip allocations. A metaslab
|
|
* group should avoid allocations if its free capacity is less than the
|
|
* zfs_mg_noalloc_threshold or its fragmentation metric is greater than
|
|
* zfs_mg_fragmentation_threshold and there is at least one metaslab group
|
|
* that can still handle allocations. If the allocation throttle is enabled
|
|
* then we skip allocations to devices that have reached their maximum
|
|
* allocation queue depth unless the selected metaslab group is the only
|
|
* eligible group remaining.
|
|
*/
|
|
static boolean_t
|
|
metaslab_group_allocatable(metaslab_group_t *mg, metaslab_group_t *rotor,
|
|
uint64_t psize, int allocator, int d)
|
|
{
|
|
spa_t *spa = mg->mg_vd->vdev_spa;
|
|
metaslab_class_t *mc = mg->mg_class;
|
|
|
|
/*
|
|
* We can only consider skipping this metaslab group if it's
|
|
* in the normal metaslab class and there are other metaslab
|
|
* groups to select from. Otherwise, we always consider it eligible
|
|
* for allocations.
|
|
*/
|
|
if ((mc != spa_normal_class(spa) &&
|
|
mc != spa_special_class(spa) &&
|
|
mc != spa_dedup_class(spa)) ||
|
|
mc->mc_groups <= 1)
|
|
return (B_TRUE);
|
|
|
|
/*
|
|
* If the metaslab group's mg_allocatable flag is set (see comments
|
|
* in metaslab_group_alloc_update() for more information) and
|
|
* the allocation throttle is disabled then allow allocations to this
|
|
* device. However, if the allocation throttle is enabled then
|
|
* check if we have reached our allocation limit (mg_alloc_queue_depth)
|
|
* to determine if we should allow allocations to this metaslab group.
|
|
* If all metaslab groups are no longer considered allocatable
|
|
* (mc_alloc_groups == 0) or we're trying to allocate the smallest
|
|
* gang block size then we allow allocations on this metaslab group
|
|
* regardless of the mg_allocatable or throttle settings.
|
|
*/
|
|
if (mg->mg_allocatable) {
|
|
metaslab_group_t *mgp;
|
|
int64_t qdepth;
|
|
uint64_t qmax = mg->mg_cur_max_alloc_queue_depth[allocator];
|
|
|
|
if (!mc->mc_alloc_throttle_enabled)
|
|
return (B_TRUE);
|
|
|
|
/*
|
|
* If this metaslab group does not have any free space, then
|
|
* there is no point in looking further.
|
|
*/
|
|
if (mg->mg_no_free_space)
|
|
return (B_FALSE);
|
|
|
|
/*
|
|
* Relax allocation throttling for ditto blocks. Due to
|
|
* random imbalances in allocation it tends to push copies
|
|
* to one vdev, that looks a bit better at the moment.
|
|
*/
|
|
qmax = qmax * (4 + d) / 4;
|
|
|
|
qdepth = zfs_refcount_count(
|
|
&mg->mg_alloc_queue_depth[allocator]);
|
|
|
|
/*
|
|
* If this metaslab group is below its qmax or it's
|
|
* the only allocatable metasable group, then attempt
|
|
* to allocate from it.
|
|
*/
|
|
if (qdepth < qmax || mc->mc_alloc_groups == 1)
|
|
return (B_TRUE);
|
|
ASSERT3U(mc->mc_alloc_groups, >, 1);
|
|
|
|
/*
|
|
* Since this metaslab group is at or over its qmax, we
|
|
* need to determine if there are metaslab groups after this
|
|
* one that might be able to handle this allocation. This is
|
|
* racy since we can't hold the locks for all metaslab
|
|
* groups at the same time when we make this check.
|
|
*/
|
|
for (mgp = mg->mg_next; mgp != rotor; mgp = mgp->mg_next) {
|
|
qmax = mgp->mg_cur_max_alloc_queue_depth[allocator];
|
|
qmax = qmax * (4 + d) / 4;
|
|
qdepth = zfs_refcount_count(
|
|
&mgp->mg_alloc_queue_depth[allocator]);
|
|
|
|
/*
|
|
* If there is another metaslab group that
|
|
* might be able to handle the allocation, then
|
|
* we return false so that we skip this group.
|
|
*/
|
|
if (qdepth < qmax && !mgp->mg_no_free_space)
|
|
return (B_FALSE);
|
|
}
|
|
|
|
/*
|
|
* We didn't find another group to handle the allocation
|
|
* so we can't skip this metaslab group even though
|
|
* we are at or over our qmax.
|
|
*/
|
|
return (B_TRUE);
|
|
|
|
} else if (mc->mc_alloc_groups == 0 || psize == SPA_MINBLOCKSIZE) {
|
|
return (B_TRUE);
|
|
}
|
|
return (B_FALSE);
|
|
}
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Range tree callbacks
|
|
* ==========================================================================
|
|
*/
|
|
|
|
/*
|
|
* Comparison function for the private size-ordered tree. Tree is sorted
|
|
* by size, larger sizes at the end of the tree.
|
|
*/
|
|
static int
|
|
metaslab_rangesize_compare(const void *x1, const void *x2)
|
|
{
|
|
const range_seg_t *r1 = x1;
|
|
const range_seg_t *r2 = x2;
|
|
uint64_t rs_size1 = r1->rs_end - r1->rs_start;
|
|
uint64_t rs_size2 = r2->rs_end - r2->rs_start;
|
|
|
|
int cmp = AVL_CMP(rs_size1, rs_size2);
|
|
if (likely(cmp))
|
|
return (cmp);
|
|
|
|
return (AVL_CMP(r1->rs_start, r2->rs_start));
|
|
}
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Common allocator routines
|
|
* ==========================================================================
|
|
*/
|
|
|
|
/*
|
|
* Return the maximum contiguous segment within the metaslab.
|
|
*/
|
|
uint64_t
|
|
metaslab_block_maxsize(metaslab_t *msp)
|
|
{
|
|
avl_tree_t *t = &msp->ms_allocatable_by_size;
|
|
range_seg_t *rs;
|
|
|
|
if (t == NULL || (rs = avl_last(t)) == NULL)
|
|
return (0ULL);
|
|
|
|
return (rs->rs_end - rs->rs_start);
|
|
}
|
|
|
|
static range_seg_t *
|
|
metaslab_block_find(avl_tree_t *t, uint64_t start, uint64_t size)
|
|
{
|
|
range_seg_t *rs, rsearch;
|
|
avl_index_t where;
|
|
|
|
rsearch.rs_start = start;
|
|
rsearch.rs_end = start + size;
|
|
|
|
rs = avl_find(t, &rsearch, &where);
|
|
if (rs == NULL) {
|
|
rs = avl_nearest(t, where, AVL_AFTER);
|
|
}
|
|
|
|
return (rs);
|
|
}
|
|
|
|
#if defined(WITH_FF_BLOCK_ALLOCATOR) || \
|
|
defined(WITH_DF_BLOCK_ALLOCATOR) || \
|
|
defined(WITH_CF_BLOCK_ALLOCATOR)
|
|
/*
|
|
* This is a helper function that can be used by the allocator to find
|
|
* a suitable block to allocate. This will search the specified AVL
|
|
* tree looking for a block that matches the specified criteria.
|
|
*/
|
|
static uint64_t
|
|
metaslab_block_picker(avl_tree_t *t, uint64_t *cursor, uint64_t size,
|
|
uint64_t align)
|
|
{
|
|
range_seg_t *rs = metaslab_block_find(t, *cursor, size);
|
|
|
|
while (rs != NULL) {
|
|
uint64_t offset = P2ROUNDUP(rs->rs_start, align);
|
|
|
|
if (offset + size <= rs->rs_end) {
|
|
*cursor = offset + size;
|
|
return (offset);
|
|
}
|
|
rs = AVL_NEXT(t, rs);
|
|
}
|
|
|
|
/*
|
|
* If we know we've searched the whole map (*cursor == 0), give up.
|
|
* Otherwise, reset the cursor to the beginning and try again.
|
|
*/
|
|
if (*cursor == 0)
|
|
return (-1ULL);
|
|
|
|
*cursor = 0;
|
|
return (metaslab_block_picker(t, cursor, size, align));
|
|
}
|
|
#endif /* WITH_FF/DF/CF_BLOCK_ALLOCATOR */
|
|
|
|
#if defined(WITH_FF_BLOCK_ALLOCATOR)
|
|
/*
|
|
* ==========================================================================
|
|
* The first-fit block allocator
|
|
* ==========================================================================
|
|
*/
|
|
static uint64_t
|
|
metaslab_ff_alloc(metaslab_t *msp, uint64_t size)
|
|
{
|
|
/*
|
|
* Find the largest power of 2 block size that evenly divides the
|
|
* requested size. This is used to try to allocate blocks with similar
|
|
* alignment from the same area of the metaslab (i.e. same cursor
|
|
* bucket) but it does not guarantee that other allocations sizes
|
|
* may exist in the same region.
|
|
*/
|
|
uint64_t align = size & -size;
|
|
uint64_t *cursor = &msp->ms_lbas[highbit64(align) - 1];
|
|
avl_tree_t *t = &msp->ms_allocatable->rt_root;
|
|
|
|
return (metaslab_block_picker(t, cursor, size, align));
|
|
}
|
|
|
|
static metaslab_ops_t metaslab_ff_ops = {
|
|
metaslab_ff_alloc
|
|
};
|
|
|
|
metaslab_ops_t *zfs_metaslab_ops = &metaslab_ff_ops;
|
|
#endif /* WITH_FF_BLOCK_ALLOCATOR */
|
|
|
|
#if defined(WITH_DF_BLOCK_ALLOCATOR)
|
|
/*
|
|
* ==========================================================================
|
|
* Dynamic block allocator -
|
|
* Uses the first fit allocation scheme until space get low and then
|
|
* adjusts to a best fit allocation method. Uses metaslab_df_alloc_threshold
|
|
* and metaslab_df_free_pct to determine when to switch the allocation scheme.
|
|
* ==========================================================================
|
|
*/
|
|
static uint64_t
|
|
metaslab_df_alloc(metaslab_t *msp, uint64_t size)
|
|
{
|
|
/*
|
|
* Find the largest power of 2 block size that evenly divides the
|
|
* requested size. This is used to try to allocate blocks with similar
|
|
* alignment from the same area of the metaslab (i.e. same cursor
|
|
* bucket) but it does not guarantee that other allocations sizes
|
|
* may exist in the same region.
|
|
*/
|
|
uint64_t align = size & -size;
|
|
uint64_t *cursor = &msp->ms_lbas[highbit64(align) - 1];
|
|
range_tree_t *rt = msp->ms_allocatable;
|
|
avl_tree_t *t = &rt->rt_root;
|
|
uint64_t max_size = metaslab_block_maxsize(msp);
|
|
int free_pct = range_tree_space(rt) * 100 / msp->ms_size;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT3U(avl_numnodes(t), ==,
|
|
avl_numnodes(&msp->ms_allocatable_by_size));
|
|
|
|
if (max_size < size)
|
|
return (-1ULL);
|
|
|
|
/*
|
|
* If we're running low on space switch to using the size
|
|
* sorted AVL tree (best-fit).
|
|
*/
|
|
if (max_size < metaslab_df_alloc_threshold ||
|
|
free_pct < metaslab_df_free_pct) {
|
|
t = &msp->ms_allocatable_by_size;
|
|
*cursor = 0;
|
|
}
|
|
|
|
return (metaslab_block_picker(t, cursor, size, 1ULL));
|
|
}
|
|
|
|
static metaslab_ops_t metaslab_df_ops = {
|
|
metaslab_df_alloc
|
|
};
|
|
|
|
metaslab_ops_t *zfs_metaslab_ops = &metaslab_df_ops;
|
|
#endif /* WITH_DF_BLOCK_ALLOCATOR */
|
|
|
|
#if defined(WITH_CF_BLOCK_ALLOCATOR)
|
|
/*
|
|
* ==========================================================================
|
|
* Cursor fit block allocator -
|
|
* Select the largest region in the metaslab, set the cursor to the beginning
|
|
* of the range and the cursor_end to the end of the range. As allocations
|
|
* are made advance the cursor. Continue allocating from the cursor until
|
|
* the range is exhausted and then find a new range.
|
|
* ==========================================================================
|
|
*/
|
|
static uint64_t
|
|
metaslab_cf_alloc(metaslab_t *msp, uint64_t size)
|
|
{
|
|
range_tree_t *rt = msp->ms_allocatable;
|
|
avl_tree_t *t = &msp->ms_allocatable_by_size;
|
|
uint64_t *cursor = &msp->ms_lbas[0];
|
|
uint64_t *cursor_end = &msp->ms_lbas[1];
|
|
uint64_t offset = 0;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT3U(avl_numnodes(t), ==, avl_numnodes(&rt->rt_root));
|
|
|
|
ASSERT3U(*cursor_end, >=, *cursor);
|
|
|
|
if ((*cursor + size) > *cursor_end) {
|
|
range_seg_t *rs;
|
|
|
|
rs = avl_last(&msp->ms_allocatable_by_size);
|
|
if (rs == NULL || (rs->rs_end - rs->rs_start) < size)
|
|
return (-1ULL);
|
|
|
|
*cursor = rs->rs_start;
|
|
*cursor_end = rs->rs_end;
|
|
}
|
|
|
|
offset = *cursor;
|
|
*cursor += size;
|
|
|
|
return (offset);
|
|
}
|
|
|
|
static metaslab_ops_t metaslab_cf_ops = {
|
|
metaslab_cf_alloc
|
|
};
|
|
|
|
metaslab_ops_t *zfs_metaslab_ops = &metaslab_cf_ops;
|
|
#endif /* WITH_CF_BLOCK_ALLOCATOR */
|
|
|
|
#if defined(WITH_NDF_BLOCK_ALLOCATOR)
|
|
/*
|
|
* ==========================================================================
|
|
* New dynamic fit allocator -
|
|
* Select a region that is large enough to allocate 2^metaslab_ndf_clump_shift
|
|
* contiguous blocks. If no region is found then just use the largest segment
|
|
* that remains.
|
|
* ==========================================================================
|
|
*/
|
|
|
|
/*
|
|
* Determines desired number of contiguous blocks (2^metaslab_ndf_clump_shift)
|
|
* to request from the allocator.
|
|
*/
|
|
uint64_t metaslab_ndf_clump_shift = 4;
|
|
|
|
static uint64_t
|
|
metaslab_ndf_alloc(metaslab_t *msp, uint64_t size)
|
|
{
|
|
avl_tree_t *t = &msp->ms_allocatable->rt_root;
|
|
avl_index_t where;
|
|
range_seg_t *rs, rsearch;
|
|
uint64_t hbit = highbit64(size);
|
|
uint64_t *cursor = &msp->ms_lbas[hbit - 1];
|
|
uint64_t max_size = metaslab_block_maxsize(msp);
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT3U(avl_numnodes(t), ==,
|
|
avl_numnodes(&msp->ms_allocatable_by_size));
|
|
|
|
if (max_size < size)
|
|
return (-1ULL);
|
|
|
|
rsearch.rs_start = *cursor;
|
|
rsearch.rs_end = *cursor + size;
|
|
|
|
rs = avl_find(t, &rsearch, &where);
|
|
if (rs == NULL || (rs->rs_end - rs->rs_start) < size) {
|
|
t = &msp->ms_allocatable_by_size;
|
|
|
|
rsearch.rs_start = 0;
|
|
rsearch.rs_end = MIN(max_size,
|
|
1ULL << (hbit + metaslab_ndf_clump_shift));
|
|
rs = avl_find(t, &rsearch, &where);
|
|
if (rs == NULL)
|
|
rs = avl_nearest(t, where, AVL_AFTER);
|
|
ASSERT(rs != NULL);
|
|
}
|
|
|
|
if ((rs->rs_end - rs->rs_start) >= size) {
|
|
*cursor = rs->rs_start + size;
|
|
return (rs->rs_start);
|
|
}
|
|
return (-1ULL);
|
|
}
|
|
|
|
static metaslab_ops_t metaslab_ndf_ops = {
|
|
metaslab_ndf_alloc
|
|
};
|
|
|
|
metaslab_ops_t *zfs_metaslab_ops = &metaslab_ndf_ops;
|
|
#endif /* WITH_NDF_BLOCK_ALLOCATOR */
|
|
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Metaslabs
|
|
* ==========================================================================
|
|
*/
|
|
|
|
/*
|
|
* Wait for any in-progress metaslab loads to complete.
|
|
*/
|
|
void
|
|
metaslab_load_wait(metaslab_t *msp)
|
|
{
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
|
|
while (msp->ms_loading) {
|
|
ASSERT(!msp->ms_loaded);
|
|
cv_wait(&msp->ms_load_cv, &msp->ms_lock);
|
|
}
|
|
}
|
|
|
|
int
|
|
metaslab_load(metaslab_t *msp)
|
|
{
|
|
int error = 0;
|
|
boolean_t success = B_FALSE;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT(!msp->ms_loaded);
|
|
ASSERT(!msp->ms_loading);
|
|
|
|
msp->ms_loading = B_TRUE;
|
|
/*
|
|
* Nobody else can manipulate a loading metaslab, so it's now safe
|
|
* to drop the lock. This way we don't have to hold the lock while
|
|
* reading the spacemap from disk.
|
|
*/
|
|
mutex_exit(&msp->ms_lock);
|
|
|
|
/*
|
|
* If the space map has not been allocated yet, then treat
|
|
* all the space in the metaslab as free and add it to ms_allocatable.
|
|
*/
|
|
if (msp->ms_sm != NULL) {
|
|
error = space_map_load(msp->ms_sm, msp->ms_allocatable,
|
|
SM_FREE);
|
|
} else {
|
|
range_tree_add(msp->ms_allocatable,
|
|
msp->ms_start, msp->ms_size);
|
|
}
|
|
|
|
success = (error == 0);
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
msp->ms_loading = B_FALSE;
|
|
|
|
if (success) {
|
|
ASSERT3P(msp->ms_group, !=, NULL);
|
|
msp->ms_loaded = B_TRUE;
|
|
|
|
/*
|
|
* If the metaslab already has a spacemap, then we need to
|
|
* remove all segments from the defer tree; otherwise, the
|
|
* metaslab is completely empty and we can skip this.
|
|
*/
|
|
if (msp->ms_sm != NULL) {
|
|
for (int t = 0; t < TXG_DEFER_SIZE; t++) {
|
|
range_tree_walk(msp->ms_defer[t],
|
|
range_tree_remove, msp->ms_allocatable);
|
|
}
|
|
}
|
|
msp->ms_max_size = metaslab_block_maxsize(msp);
|
|
}
|
|
cv_broadcast(&msp->ms_load_cv);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
metaslab_unload(metaslab_t *msp)
|
|
{
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
range_tree_vacate(msp->ms_allocatable, NULL, NULL);
|
|
msp->ms_loaded = B_FALSE;
|
|
msp->ms_weight &= ~METASLAB_ACTIVE_MASK;
|
|
msp->ms_max_size = 0;
|
|
}
|
|
|
|
static void
|
|
metaslab_space_update(vdev_t *vd, metaslab_class_t *mc, int64_t alloc_delta,
|
|
int64_t defer_delta, int64_t space_delta)
|
|
{
|
|
vdev_space_update(vd, alloc_delta, defer_delta, space_delta);
|
|
|
|
ASSERT3P(vd->vdev_spa->spa_root_vdev, ==, vd->vdev_parent);
|
|
ASSERT(vd->vdev_ms_count != 0);
|
|
|
|
metaslab_class_space_update(mc, alloc_delta, defer_delta, space_delta,
|
|
vdev_deflated_space(vd, space_delta));
|
|
}
|
|
|
|
int
|
|
metaslab_init(metaslab_group_t *mg, uint64_t id, uint64_t object, uint64_t txg,
|
|
metaslab_t **msp)
|
|
{
|
|
vdev_t *vd = mg->mg_vd;
|
|
spa_t *spa = vd->vdev_spa;
|
|
objset_t *mos = spa->spa_meta_objset;
|
|
metaslab_t *ms;
|
|
int error;
|
|
|
|
ms = kmem_zalloc(sizeof (metaslab_t), KM_SLEEP);
|
|
mutex_init(&ms->ms_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
mutex_init(&ms->ms_sync_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
cv_init(&ms->ms_load_cv, NULL, CV_DEFAULT, NULL);
|
|
ms->ms_id = id;
|
|
ms->ms_start = id << vd->vdev_ms_shift;
|
|
ms->ms_size = 1ULL << vd->vdev_ms_shift;
|
|
ms->ms_allocator = -1;
|
|
ms->ms_new = B_TRUE;
|
|
|
|
/*
|
|
* We only open space map objects that already exist. All others
|
|
* will be opened when we finally allocate an object for it.
|
|
*/
|
|
if (object != 0) {
|
|
error = space_map_open(&ms->ms_sm, mos, object, ms->ms_start,
|
|
ms->ms_size, vd->vdev_ashift);
|
|
|
|
if (error != 0) {
|
|
kmem_free(ms, sizeof (metaslab_t));
|
|
return (error);
|
|
}
|
|
|
|
ASSERT(ms->ms_sm != NULL);
|
|
}
|
|
|
|
/*
|
|
* We create the main range tree here, but we don't create the
|
|
* other range trees until metaslab_sync_done(). This serves
|
|
* two purposes: it allows metaslab_sync_done() to detect the
|
|
* addition of new space; and for debugging, it ensures that we'd
|
|
* data fault on any attempt to use this metaslab before it's ready.
|
|
*/
|
|
ms->ms_allocatable = range_tree_create_impl(&rt_avl_ops,
|
|
&ms->ms_allocatable_by_size, metaslab_rangesize_compare, 0);
|
|
metaslab_group_add(mg, ms);
|
|
|
|
metaslab_set_fragmentation(ms);
|
|
|
|
/*
|
|
* If we're opening an existing pool (txg == 0) or creating
|
|
* a new one (txg == TXG_INITIAL), all space is available now.
|
|
* If we're adding space to an existing pool, the new space
|
|
* does not become available until after this txg has synced.
|
|
* The metaslab's weight will also be initialized when we sync
|
|
* out this txg. This ensures that we don't attempt to allocate
|
|
* from it before we have initialized it completely.
|
|
*/
|
|
if (txg <= TXG_INITIAL)
|
|
metaslab_sync_done(ms, 0);
|
|
|
|
/*
|
|
* If metaslab_debug_load is set and we're initializing a metaslab
|
|
* that has an allocated space map object then load the space map
|
|
* so that we can verify frees.
|
|
*/
|
|
if (metaslab_debug_load && ms->ms_sm != NULL) {
|
|
mutex_enter(&ms->ms_lock);
|
|
VERIFY0(metaslab_load(ms));
|
|
mutex_exit(&ms->ms_lock);
|
|
}
|
|
|
|
if (txg != 0) {
|
|
vdev_dirty(vd, 0, NULL, txg);
|
|
vdev_dirty(vd, VDD_METASLAB, ms, txg);
|
|
}
|
|
|
|
*msp = ms;
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
metaslab_fini(metaslab_t *msp)
|
|
{
|
|
metaslab_group_t *mg = msp->ms_group;
|
|
vdev_t *vd = mg->mg_vd;
|
|
|
|
metaslab_group_remove(mg, msp);
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
VERIFY(msp->ms_group == NULL);
|
|
metaslab_space_update(vd, mg->mg_class,
|
|
-space_map_allocated(msp->ms_sm), 0, -msp->ms_size);
|
|
|
|
space_map_close(msp->ms_sm);
|
|
|
|
metaslab_unload(msp);
|
|
|
|
range_tree_destroy(msp->ms_allocatable);
|
|
range_tree_destroy(msp->ms_freeing);
|
|
range_tree_destroy(msp->ms_freed);
|
|
|
|
for (int t = 0; t < TXG_SIZE; t++) {
|
|
range_tree_destroy(msp->ms_allocating[t]);
|
|
}
|
|
|
|
for (int t = 0; t < TXG_DEFER_SIZE; t++) {
|
|
range_tree_destroy(msp->ms_defer[t]);
|
|
}
|
|
ASSERT0(msp->ms_deferspace);
|
|
|
|
range_tree_destroy(msp->ms_checkpointing);
|
|
|
|
mutex_exit(&msp->ms_lock);
|
|
cv_destroy(&msp->ms_load_cv);
|
|
mutex_destroy(&msp->ms_lock);
|
|
mutex_destroy(&msp->ms_sync_lock);
|
|
ASSERT3U(msp->ms_allocator, ==, -1);
|
|
|
|
kmem_free(msp, sizeof (metaslab_t));
|
|
}
|
|
|
|
#define FRAGMENTATION_TABLE_SIZE 17
|
|
|
|
/*
|
|
* This table defines a segment size based fragmentation metric that will
|
|
* allow each metaslab to derive its own fragmentation value. This is done
|
|
* by calculating the space in each bucket of the spacemap histogram and
|
|
* multiplying that by the fragmetation metric in this table. Doing
|
|
* this for all buckets and dividing it by the total amount of free
|
|
* space in this metaslab (i.e. the total free space in all buckets) gives
|
|
* us the fragmentation metric. This means that a high fragmentation metric
|
|
* equates to most of the free space being comprised of small segments.
|
|
* Conversely, if the metric is low, then most of the free space is in
|
|
* large segments. A 10% change in fragmentation equates to approximately
|
|
* double the number of segments.
|
|
*
|
|
* This table defines 0% fragmented space using 16MB segments. Testing has
|
|
* shown that segments that are greater than or equal to 16MB do not suffer
|
|
* from drastic performance problems. Using this value, we derive the rest
|
|
* of the table. Since the fragmentation value is never stored on disk, it
|
|
* is possible to change these calculations in the future.
|
|
*/
|
|
int zfs_frag_table[FRAGMENTATION_TABLE_SIZE] = {
|
|
100, /* 512B */
|
|
100, /* 1K */
|
|
98, /* 2K */
|
|
95, /* 4K */
|
|
90, /* 8K */
|
|
80, /* 16K */
|
|
70, /* 32K */
|
|
60, /* 64K */
|
|
50, /* 128K */
|
|
40, /* 256K */
|
|
30, /* 512K */
|
|
20, /* 1M */
|
|
15, /* 2M */
|
|
10, /* 4M */
|
|
5, /* 8M */
|
|
0 /* 16M */
|
|
};
|
|
|
|
/*
|
|
* Calclate the metaslab's fragmentation metric. A return value
|
|
* of ZFS_FRAG_INVALID means that the metaslab has not been upgraded and does
|
|
* not support this metric. Otherwise, the return value should be in the
|
|
* range [0, 100].
|
|
*/
|
|
static void
|
|
metaslab_set_fragmentation(metaslab_t *msp)
|
|
{
|
|
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
|
|
uint64_t fragmentation = 0;
|
|
uint64_t total = 0;
|
|
boolean_t feature_enabled = spa_feature_is_enabled(spa,
|
|
SPA_FEATURE_SPACEMAP_HISTOGRAM);
|
|
|
|
if (!feature_enabled) {
|
|
msp->ms_fragmentation = ZFS_FRAG_INVALID;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A null space map means that the entire metaslab is free
|
|
* and thus is not fragmented.
|
|
*/
|
|
if (msp->ms_sm == NULL) {
|
|
msp->ms_fragmentation = 0;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If this metaslab's space map has not been upgraded, flag it
|
|
* so that we upgrade next time we encounter it.
|
|
*/
|
|
if (msp->ms_sm->sm_dbuf->db_size != sizeof (space_map_phys_t)) {
|
|
uint64_t txg = spa_syncing_txg(spa);
|
|
vdev_t *vd = msp->ms_group->mg_vd;
|
|
|
|
/*
|
|
* If we've reached the final dirty txg, then we must
|
|
* be shutting down the pool. We don't want to dirty
|
|
* any data past this point so skip setting the condense
|
|
* flag. We can retry this action the next time the pool
|
|
* is imported.
|
|
*/
|
|
if (spa_writeable(spa) && txg < spa_final_dirty_txg(spa)) {
|
|
msp->ms_condense_wanted = B_TRUE;
|
|
vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
|
|
zfs_dbgmsg("txg %llu, requesting force condense: "
|
|
"ms_id %llu, vdev_id %llu", txg, msp->ms_id,
|
|
vd->vdev_id);
|
|
}
|
|
msp->ms_fragmentation = ZFS_FRAG_INVALID;
|
|
return;
|
|
}
|
|
|
|
for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
|
|
uint64_t space = 0;
|
|
uint8_t shift = msp->ms_sm->sm_shift;
|
|
|
|
int idx = MIN(shift - SPA_MINBLOCKSHIFT + i,
|
|
FRAGMENTATION_TABLE_SIZE - 1);
|
|
|
|
if (msp->ms_sm->sm_phys->smp_histogram[i] == 0)
|
|
continue;
|
|
|
|
space = msp->ms_sm->sm_phys->smp_histogram[i] << (i + shift);
|
|
total += space;
|
|
|
|
ASSERT3U(idx, <, FRAGMENTATION_TABLE_SIZE);
|
|
fragmentation += space * zfs_frag_table[idx];
|
|
}
|
|
|
|
if (total > 0)
|
|
fragmentation /= total;
|
|
ASSERT3U(fragmentation, <=, 100);
|
|
|
|
msp->ms_fragmentation = fragmentation;
|
|
}
|
|
|
|
/*
|
|
* Compute a weight -- a selection preference value -- for the given metaslab.
|
|
* This is based on the amount of free space, the level of fragmentation,
|
|
* the LBA range, and whether the metaslab is loaded.
|
|
*/
|
|
static uint64_t
|
|
metaslab_space_weight(metaslab_t *msp)
|
|
{
|
|
metaslab_group_t *mg = msp->ms_group;
|
|
vdev_t *vd = mg->mg_vd;
|
|
uint64_t weight, space;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT(!vd->vdev_removing);
|
|
|
|
/*
|
|
* The baseline weight is the metaslab's free space.
|
|
*/
|
|
space = msp->ms_size - space_map_allocated(msp->ms_sm);
|
|
|
|
if (metaslab_fragmentation_factor_enabled &&
|
|
msp->ms_fragmentation != ZFS_FRAG_INVALID) {
|
|
/*
|
|
* Use the fragmentation information to inversely scale
|
|
* down the baseline weight. We need to ensure that we
|
|
* don't exclude this metaslab completely when it's 100%
|
|
* fragmented. To avoid this we reduce the fragmented value
|
|
* by 1.
|
|
*/
|
|
space = (space * (100 - (msp->ms_fragmentation - 1))) / 100;
|
|
|
|
/*
|
|
* If space < SPA_MINBLOCKSIZE, then we will not allocate from
|
|
* this metaslab again. The fragmentation metric may have
|
|
* decreased the space to something smaller than
|
|
* SPA_MINBLOCKSIZE, so reset the space to SPA_MINBLOCKSIZE
|
|
* so that we can consume any remaining space.
|
|
*/
|
|
if (space > 0 && space < SPA_MINBLOCKSIZE)
|
|
space = SPA_MINBLOCKSIZE;
|
|
}
|
|
weight = space;
|
|
|
|
/*
|
|
* Modern disks have uniform bit density and constant angular velocity.
|
|
* Therefore, the outer recording zones are faster (higher bandwidth)
|
|
* than the inner zones by the ratio of outer to inner track diameter,
|
|
* which is typically around 2:1. We account for this by assigning
|
|
* higher weight to lower metaslabs (multiplier ranging from 2x to 1x).
|
|
* In effect, this means that we'll select the metaslab with the most
|
|
* free bandwidth rather than simply the one with the most free space.
|
|
*/
|
|
if (!vd->vdev_nonrot && metaslab_lba_weighting_enabled) {
|
|
weight = 2 * weight - (msp->ms_id * weight) / vd->vdev_ms_count;
|
|
ASSERT(weight >= space && weight <= 2 * space);
|
|
}
|
|
|
|
/*
|
|
* If this metaslab is one we're actively using, adjust its
|
|
* weight to make it preferable to any inactive metaslab so
|
|
* we'll polish it off. If the fragmentation on this metaslab
|
|
* has exceed our threshold, then don't mark it active.
|
|
*/
|
|
if (msp->ms_loaded && msp->ms_fragmentation != ZFS_FRAG_INVALID &&
|
|
msp->ms_fragmentation <= zfs_metaslab_fragmentation_threshold) {
|
|
weight |= (msp->ms_weight & METASLAB_ACTIVE_MASK);
|
|
}
|
|
|
|
WEIGHT_SET_SPACEBASED(weight);
|
|
return (weight);
|
|
}
|
|
|
|
/*
|
|
* Return the weight of the specified metaslab, according to the segment-based
|
|
* weighting algorithm. The metaslab must be loaded. This function can
|
|
* be called within a sync pass since it relies only on the metaslab's
|
|
* range tree which is always accurate when the metaslab is loaded.
|
|
*/
|
|
static uint64_t
|
|
metaslab_weight_from_range_tree(metaslab_t *msp)
|
|
{
|
|
uint64_t weight = 0;
|
|
uint32_t segments = 0;
|
|
|
|
ASSERT(msp->ms_loaded);
|
|
|
|
for (int i = RANGE_TREE_HISTOGRAM_SIZE - 1; i >= SPA_MINBLOCKSHIFT;
|
|
i--) {
|
|
uint8_t shift = msp->ms_group->mg_vd->vdev_ashift;
|
|
int max_idx = SPACE_MAP_HISTOGRAM_SIZE + shift - 1;
|
|
|
|
segments <<= 1;
|
|
segments += msp->ms_allocatable->rt_histogram[i];
|
|
|
|
/*
|
|
* The range tree provides more precision than the space map
|
|
* and must be downgraded so that all values fit within the
|
|
* space map's histogram. This allows us to compare loaded
|
|
* vs. unloaded metaslabs to determine which metaslab is
|
|
* considered "best".
|
|
*/
|
|
if (i > max_idx)
|
|
continue;
|
|
|
|
if (segments != 0) {
|
|
WEIGHT_SET_COUNT(weight, segments);
|
|
WEIGHT_SET_INDEX(weight, i);
|
|
WEIGHT_SET_ACTIVE(weight, 0);
|
|
break;
|
|
}
|
|
}
|
|
return (weight);
|
|
}
|
|
|
|
/*
|
|
* Calculate the weight based on the on-disk histogram. This should only
|
|
* be called after a sync pass has completely finished since the on-disk
|
|
* information is updated in metaslab_sync().
|
|
*/
|
|
static uint64_t
|
|
metaslab_weight_from_spacemap(metaslab_t *msp)
|
|
{
|
|
uint64_t weight = 0;
|
|
|
|
for (int i = SPACE_MAP_HISTOGRAM_SIZE - 1; i >= 0; i--) {
|
|
if (msp->ms_sm->sm_phys->smp_histogram[i] != 0) {
|
|
WEIGHT_SET_COUNT(weight,
|
|
msp->ms_sm->sm_phys->smp_histogram[i]);
|
|
WEIGHT_SET_INDEX(weight, i +
|
|
msp->ms_sm->sm_shift);
|
|
WEIGHT_SET_ACTIVE(weight, 0);
|
|
break;
|
|
}
|
|
}
|
|
return (weight);
|
|
}
|
|
|
|
/*
|
|
* Compute a segment-based weight for the specified metaslab. The weight
|
|
* is determined by highest bucket in the histogram. The information
|
|
* for the highest bucket is encoded into the weight value.
|
|
*/
|
|
static uint64_t
|
|
metaslab_segment_weight(metaslab_t *msp)
|
|
{
|
|
metaslab_group_t *mg = msp->ms_group;
|
|
uint64_t weight = 0;
|
|
uint8_t shift = mg->mg_vd->vdev_ashift;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
|
|
/*
|
|
* The metaslab is completely free.
|
|
*/
|
|
if (space_map_allocated(msp->ms_sm) == 0) {
|
|
int idx = highbit64(msp->ms_size) - 1;
|
|
int max_idx = SPACE_MAP_HISTOGRAM_SIZE + shift - 1;
|
|
|
|
if (idx < max_idx) {
|
|
WEIGHT_SET_COUNT(weight, 1ULL);
|
|
WEIGHT_SET_INDEX(weight, idx);
|
|
} else {
|
|
WEIGHT_SET_COUNT(weight, 1ULL << (idx - max_idx));
|
|
WEIGHT_SET_INDEX(weight, max_idx);
|
|
}
|
|
WEIGHT_SET_ACTIVE(weight, 0);
|
|
ASSERT(!WEIGHT_IS_SPACEBASED(weight));
|
|
|
|
return (weight);
|
|
}
|
|
|
|
ASSERT3U(msp->ms_sm->sm_dbuf->db_size, ==, sizeof (space_map_phys_t));
|
|
|
|
/*
|
|
* If the metaslab is fully allocated then just make the weight 0.
|
|
*/
|
|
if (space_map_allocated(msp->ms_sm) == msp->ms_size)
|
|
return (0);
|
|
/*
|
|
* If the metaslab is already loaded, then use the range tree to
|
|
* determine the weight. Otherwise, we rely on the space map information
|
|
* to generate the weight.
|
|
*/
|
|
if (msp->ms_loaded) {
|
|
weight = metaslab_weight_from_range_tree(msp);
|
|
} else {
|
|
weight = metaslab_weight_from_spacemap(msp);
|
|
}
|
|
|
|
/*
|
|
* If the metaslab was active the last time we calculated its weight
|
|
* then keep it active. We want to consume the entire region that
|
|
* is associated with this weight.
|
|
*/
|
|
if (msp->ms_activation_weight != 0 && weight != 0)
|
|
WEIGHT_SET_ACTIVE(weight, WEIGHT_GET_ACTIVE(msp->ms_weight));
|
|
return (weight);
|
|
}
|
|
|
|
/*
|
|
* Determine if we should attempt to allocate from this metaslab. If the
|
|
* metaslab has a maximum size then we can quickly determine if the desired
|
|
* allocation size can be satisfied. Otherwise, if we're using segment-based
|
|
* weighting then we can determine the maximum allocation that this metaslab
|
|
* can accommodate based on the index encoded in the weight. If we're using
|
|
* space-based weights then rely on the entire weight (excluding the weight
|
|
* type bit).
|
|
*/
|
|
boolean_t
|
|
metaslab_should_allocate(metaslab_t *msp, uint64_t asize)
|
|
{
|
|
boolean_t should_allocate;
|
|
|
|
if (msp->ms_max_size != 0)
|
|
return (msp->ms_max_size >= asize);
|
|
|
|
if (!WEIGHT_IS_SPACEBASED(msp->ms_weight)) {
|
|
/*
|
|
* The metaslab segment weight indicates segments in the
|
|
* range [2^i, 2^(i+1)), where i is the index in the weight.
|
|
* Since the asize might be in the middle of the range, we
|
|
* should attempt the allocation if asize < 2^(i+1).
|
|
*/
|
|
should_allocate = (asize <
|
|
1ULL << (WEIGHT_GET_INDEX(msp->ms_weight) + 1));
|
|
} else {
|
|
should_allocate = (asize <=
|
|
(msp->ms_weight & ~METASLAB_WEIGHT_TYPE));
|
|
}
|
|
return (should_allocate);
|
|
}
|
|
static uint64_t
|
|
metaslab_weight(metaslab_t *msp)
|
|
{
|
|
vdev_t *vd = msp->ms_group->mg_vd;
|
|
spa_t *spa = vd->vdev_spa;
|
|
uint64_t weight;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
|
|
/*
|
|
* If this vdev is in the process of being removed, there is nothing
|
|
* for us to do here.
|
|
*/
|
|
if (vd->vdev_removing)
|
|
return (0);
|
|
|
|
metaslab_set_fragmentation(msp);
|
|
|
|
/*
|
|
* Update the maximum size if the metaslab is loaded. This will
|
|
* ensure that we get an accurate maximum size if newly freed space
|
|
* has been added back into the free tree.
|
|
*/
|
|
if (msp->ms_loaded)
|
|
msp->ms_max_size = metaslab_block_maxsize(msp);
|
|
|
|
/*
|
|
* Segment-based weighting requires space map histogram support.
|
|
*/
|
|
if (zfs_metaslab_segment_weight_enabled &&
|
|
spa_feature_is_enabled(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM) &&
|
|
(msp->ms_sm == NULL || msp->ms_sm->sm_dbuf->db_size ==
|
|
sizeof (space_map_phys_t))) {
|
|
weight = metaslab_segment_weight(msp);
|
|
} else {
|
|
weight = metaslab_space_weight(msp);
|
|
}
|
|
return (weight);
|
|
}
|
|
|
|
static int
|
|
metaslab_activate_allocator(metaslab_group_t *mg, metaslab_t *msp,
|
|
int allocator, uint64_t activation_weight)
|
|
{
|
|
/*
|
|
* If we're activating for the claim code, we don't want to actually
|
|
* set the metaslab up for a specific allocator.
|
|
*/
|
|
if (activation_weight == METASLAB_WEIGHT_CLAIM)
|
|
return (0);
|
|
metaslab_t **arr = (activation_weight == METASLAB_WEIGHT_PRIMARY ?
|
|
mg->mg_primaries : mg->mg_secondaries);
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
mutex_enter(&mg->mg_lock);
|
|
if (arr[allocator] != NULL) {
|
|
mutex_exit(&mg->mg_lock);
|
|
return (EEXIST);
|
|
}
|
|
|
|
arr[allocator] = msp;
|
|
ASSERT3S(msp->ms_allocator, ==, -1);
|
|
msp->ms_allocator = allocator;
|
|
msp->ms_primary = (activation_weight == METASLAB_WEIGHT_PRIMARY);
|
|
mutex_exit(&mg->mg_lock);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
metaslab_activate(metaslab_t *msp, int allocator, uint64_t activation_weight)
|
|
{
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
|
|
if ((msp->ms_weight & METASLAB_ACTIVE_MASK) == 0) {
|
|
int error = 0;
|
|
metaslab_load_wait(msp);
|
|
if (!msp->ms_loaded) {
|
|
if ((error = metaslab_load(msp)) != 0) {
|
|
metaslab_group_sort(msp->ms_group, msp, 0);
|
|
return (error);
|
|
}
|
|
}
|
|
if ((msp->ms_weight & METASLAB_ACTIVE_MASK) != 0) {
|
|
/*
|
|
* The metaslab was activated for another allocator
|
|
* while we were waiting, we should reselect.
|
|
*/
|
|
return (SET_ERROR(EBUSY));
|
|
}
|
|
if ((error = metaslab_activate_allocator(msp->ms_group, msp,
|
|
allocator, activation_weight)) != 0) {
|
|
return (error);
|
|
}
|
|
|
|
msp->ms_activation_weight = msp->ms_weight;
|
|
metaslab_group_sort(msp->ms_group, msp,
|
|
msp->ms_weight | activation_weight);
|
|
}
|
|
ASSERT(msp->ms_loaded);
|
|
ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
metaslab_passivate_allocator(metaslab_group_t *mg, metaslab_t *msp,
|
|
uint64_t weight)
|
|
{
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
if (msp->ms_weight & METASLAB_WEIGHT_CLAIM) {
|
|
metaslab_group_sort(mg, msp, weight);
|
|
return;
|
|
}
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
ASSERT3P(msp->ms_group, ==, mg);
|
|
if (msp->ms_primary) {
|
|
ASSERT3U(0, <=, msp->ms_allocator);
|
|
ASSERT3U(msp->ms_allocator, <, mg->mg_allocators);
|
|
ASSERT3P(mg->mg_primaries[msp->ms_allocator], ==, msp);
|
|
ASSERT(msp->ms_weight & METASLAB_WEIGHT_PRIMARY);
|
|
mg->mg_primaries[msp->ms_allocator] = NULL;
|
|
} else {
|
|
ASSERT(msp->ms_weight & METASLAB_WEIGHT_SECONDARY);
|
|
ASSERT3P(mg->mg_secondaries[msp->ms_allocator], ==, msp);
|
|
mg->mg_secondaries[msp->ms_allocator] = NULL;
|
|
}
|
|
msp->ms_allocator = -1;
|
|
metaslab_group_sort_impl(mg, msp, weight);
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
static void
|
|
metaslab_passivate(metaslab_t *msp, uint64_t weight)
|
|
{
|
|
ASSERTV(uint64_t size = weight & ~METASLAB_WEIGHT_TYPE);
|
|
|
|
/*
|
|
* If size < SPA_MINBLOCKSIZE, then we will not allocate from
|
|
* this metaslab again. In that case, it had better be empty,
|
|
* or we would be leaving space on the table.
|
|
*/
|
|
ASSERT(!WEIGHT_IS_SPACEBASED(msp->ms_weight) ||
|
|
size >= SPA_MINBLOCKSIZE ||
|
|
range_tree_space(msp->ms_allocatable) == 0);
|
|
ASSERT0(weight & METASLAB_ACTIVE_MASK);
|
|
|
|
msp->ms_activation_weight = 0;
|
|
metaslab_passivate_allocator(msp->ms_group, msp, weight);
|
|
ASSERT((msp->ms_weight & METASLAB_ACTIVE_MASK) == 0);
|
|
}
|
|
|
|
/*
|
|
* Segment-based metaslabs are activated once and remain active until
|
|
* we either fail an allocation attempt (similar to space-based metaslabs)
|
|
* or have exhausted the free space in zfs_metaslab_switch_threshold
|
|
* buckets since the metaslab was activated. This function checks to see
|
|
* if we've exhaused the zfs_metaslab_switch_threshold buckets in the
|
|
* metaslab and passivates it proactively. This will allow us to select a
|
|
* metaslab with a larger contiguous region, if any, remaining within this
|
|
* metaslab group. If we're in sync pass > 1, then we continue using this
|
|
* metaslab so that we don't dirty more block and cause more sync passes.
|
|
*/
|
|
void
|
|
metaslab_segment_may_passivate(metaslab_t *msp)
|
|
{
|
|
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
|
|
|
|
if (WEIGHT_IS_SPACEBASED(msp->ms_weight) || spa_sync_pass(spa) > 1)
|
|
return;
|
|
|
|
/*
|
|
* Since we are in the middle of a sync pass, the most accurate
|
|
* information that is accessible to us is the in-core range tree
|
|
* histogram; calculate the new weight based on that information.
|
|
*/
|
|
uint64_t weight = metaslab_weight_from_range_tree(msp);
|
|
int activation_idx = WEIGHT_GET_INDEX(msp->ms_activation_weight);
|
|
int current_idx = WEIGHT_GET_INDEX(weight);
|
|
|
|
if (current_idx <= activation_idx - zfs_metaslab_switch_threshold)
|
|
metaslab_passivate(msp, weight);
|
|
}
|
|
|
|
static void
|
|
metaslab_preload(void *arg)
|
|
{
|
|
metaslab_t *msp = arg;
|
|
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
|
|
fstrans_cookie_t cookie = spl_fstrans_mark();
|
|
|
|
ASSERT(!MUTEX_HELD(&msp->ms_group->mg_lock));
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
metaslab_load_wait(msp);
|
|
if (!msp->ms_loaded)
|
|
(void) metaslab_load(msp);
|
|
msp->ms_selected_txg = spa_syncing_txg(spa);
|
|
mutex_exit(&msp->ms_lock);
|
|
spl_fstrans_unmark(cookie);
|
|
}
|
|
|
|
static void
|
|
metaslab_group_preload(metaslab_group_t *mg)
|
|
{
|
|
spa_t *spa = mg->mg_vd->vdev_spa;
|
|
metaslab_t *msp;
|
|
avl_tree_t *t = &mg->mg_metaslab_tree;
|
|
int m = 0;
|
|
|
|
if (spa_shutting_down(spa) || !metaslab_preload_enabled) {
|
|
taskq_wait_outstanding(mg->mg_taskq, 0);
|
|
return;
|
|
}
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
|
|
/*
|
|
* Load the next potential metaslabs
|
|
*/
|
|
for (msp = avl_first(t); msp != NULL; msp = AVL_NEXT(t, msp)) {
|
|
ASSERT3P(msp->ms_group, ==, mg);
|
|
|
|
/*
|
|
* We preload only the maximum number of metaslabs specified
|
|
* by metaslab_preload_limit. If a metaslab is being forced
|
|
* to condense then we preload it too. This will ensure
|
|
* that force condensing happens in the next txg.
|
|
*/
|
|
if (++m > metaslab_preload_limit && !msp->ms_condense_wanted) {
|
|
continue;
|
|
}
|
|
|
|
VERIFY(taskq_dispatch(mg->mg_taskq, metaslab_preload,
|
|
msp, TQ_SLEEP) != TASKQID_INVALID);
|
|
}
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
|
|
/*
|
|
* Determine if the space map's on-disk footprint is past our tolerance
|
|
* for inefficiency. We would like to use the following criteria to make
|
|
* our decision:
|
|
*
|
|
* 1. The size of the space map object should not dramatically increase as a
|
|
* result of writing out the free space range tree.
|
|
*
|
|
* 2. The minimal on-disk space map representation is zfs_condense_pct/100
|
|
* times the size than the free space range tree representation
|
|
* (i.e. zfs_condense_pct = 110 and in-core = 1MB, minimal = 1.1MB).
|
|
*
|
|
* 3. The on-disk size of the space map should actually decrease.
|
|
*
|
|
* Unfortunately, we cannot compute the on-disk size of the space map in this
|
|
* context because we cannot accurately compute the effects of compression, etc.
|
|
* Instead, we apply the heuristic described in the block comment for
|
|
* zfs_metaslab_condense_block_threshold - we only condense if the space used
|
|
* is greater than a threshold number of blocks.
|
|
*/
|
|
static boolean_t
|
|
metaslab_should_condense(metaslab_t *msp)
|
|
{
|
|
space_map_t *sm = msp->ms_sm;
|
|
vdev_t *vd = msp->ms_group->mg_vd;
|
|
uint64_t vdev_blocksize = 1 << vd->vdev_ashift;
|
|
uint64_t current_txg = spa_syncing_txg(vd->vdev_spa);
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT(msp->ms_loaded);
|
|
|
|
/*
|
|
* Allocations and frees in early passes are generally more space
|
|
* efficient (in terms of blocks described in space map entries)
|
|
* than the ones in later passes (e.g. we don't compress after
|
|
* sync pass 5) and condensing a metaslab multiple times in a txg
|
|
* could degrade performance.
|
|
*
|
|
* Thus we prefer condensing each metaslab at most once every txg at
|
|
* the earliest sync pass possible. If a metaslab is eligible for
|
|
* condensing again after being considered for condensing within the
|
|
* same txg, it will hopefully be dirty in the next txg where it will
|
|
* be condensed at an earlier pass.
|
|
*/
|
|
if (msp->ms_condense_checked_txg == current_txg)
|
|
return (B_FALSE);
|
|
msp->ms_condense_checked_txg = current_txg;
|
|
|
|
/*
|
|
* We always condense metaslabs that are empty and metaslabs for
|
|
* which a condense request has been made.
|
|
*/
|
|
if (avl_is_empty(&msp->ms_allocatable_by_size) ||
|
|
msp->ms_condense_wanted)
|
|
return (B_TRUE);
|
|
|
|
uint64_t object_size = space_map_length(msp->ms_sm);
|
|
uint64_t optimal_size = space_map_estimate_optimal_size(sm,
|
|
msp->ms_allocatable, SM_NO_VDEVID);
|
|
|
|
dmu_object_info_t doi;
|
|
dmu_object_info_from_db(sm->sm_dbuf, &doi);
|
|
uint64_t record_size = MAX(doi.doi_data_block_size, vdev_blocksize);
|
|
|
|
return (object_size >= (optimal_size * zfs_condense_pct / 100) &&
|
|
object_size > zfs_metaslab_condense_block_threshold * record_size);
|
|
}
|
|
|
|
/*
|
|
* Condense the on-disk space map representation to its minimized form.
|
|
* The minimized form consists of a small number of allocations followed by
|
|
* the entries of the free range tree.
|
|
*/
|
|
static void
|
|
metaslab_condense(metaslab_t *msp, uint64_t txg, dmu_tx_t *tx)
|
|
{
|
|
range_tree_t *condense_tree;
|
|
space_map_t *sm = msp->ms_sm;
|
|
|
|
ASSERT(MUTEX_HELD(&msp->ms_lock));
|
|
ASSERT(msp->ms_loaded);
|
|
|
|
|
|
zfs_dbgmsg("condensing: txg %llu, msp[%llu] %p, vdev id %llu, "
|
|
"spa %s, smp size %llu, segments %lu, forcing condense=%s", txg,
|
|
msp->ms_id, msp, msp->ms_group->mg_vd->vdev_id,
|
|
msp->ms_group->mg_vd->vdev_spa->spa_name,
|
|
space_map_length(msp->ms_sm),
|
|
avl_numnodes(&msp->ms_allocatable->rt_root),
|
|
msp->ms_condense_wanted ? "TRUE" : "FALSE");
|
|
|
|
msp->ms_condense_wanted = B_FALSE;
|
|
|
|
/*
|
|
* Create an range tree that is 100% allocated. We remove segments
|
|
* that have been freed in this txg, any deferred frees that exist,
|
|
* and any allocation in the future. Removing segments should be
|
|
* a relatively inexpensive operation since we expect these trees to
|
|
* have a small number of nodes.
|
|
*/
|
|
condense_tree = range_tree_create(NULL, NULL);
|
|
range_tree_add(condense_tree, msp->ms_start, msp->ms_size);
|
|
|
|
range_tree_walk(msp->ms_freeing, range_tree_remove, condense_tree);
|
|
range_tree_walk(msp->ms_freed, range_tree_remove, condense_tree);
|
|
|
|
for (int t = 0; t < TXG_DEFER_SIZE; t++) {
|
|
range_tree_walk(msp->ms_defer[t],
|
|
range_tree_remove, condense_tree);
|
|
}
|
|
|
|
for (int t = 1; t < TXG_CONCURRENT_STATES; t++) {
|
|
range_tree_walk(msp->ms_allocating[(txg + t) & TXG_MASK],
|
|
range_tree_remove, condense_tree);
|
|
}
|
|
|
|
/*
|
|
* We're about to drop the metaslab's lock thus allowing
|
|
* other consumers to change it's content. Set the
|
|
* metaslab's ms_condensing flag to ensure that
|
|
* allocations on this metaslab do not occur while we're
|
|
* in the middle of committing it to disk. This is only critical
|
|
* for ms_allocatable as all other range trees use per txg
|
|
* views of their content.
|
|
*/
|
|
msp->ms_condensing = B_TRUE;
|
|
|
|
mutex_exit(&msp->ms_lock);
|
|
space_map_truncate(sm, zfs_metaslab_sm_blksz, tx);
|
|
|
|
/*
|
|
* While we would ideally like to create a space map representation
|
|
* that consists only of allocation records, doing so can be
|
|
* prohibitively expensive because the in-core free tree can be
|
|
* large, and therefore computationally expensive to subtract
|
|
* from the condense_tree. Instead we sync out two trees, a cheap
|
|
* allocation only tree followed by the in-core free tree. While not
|
|
* optimal, this is typically close to optimal, and much cheaper to
|
|
* compute.
|
|
*/
|
|
space_map_write(sm, condense_tree, SM_ALLOC, SM_NO_VDEVID, tx);
|
|
range_tree_vacate(condense_tree, NULL, NULL);
|
|
range_tree_destroy(condense_tree);
|
|
|
|
space_map_write(sm, msp->ms_allocatable, SM_FREE, SM_NO_VDEVID, tx);
|
|
mutex_enter(&msp->ms_lock);
|
|
msp->ms_condensing = B_FALSE;
|
|
}
|
|
|
|
/*
|
|
* Write a metaslab to disk in the context of the specified transaction group.
|
|
*/
|
|
void
|
|
metaslab_sync(metaslab_t *msp, uint64_t txg)
|
|
{
|
|
metaslab_group_t *mg = msp->ms_group;
|
|
vdev_t *vd = mg->mg_vd;
|
|
spa_t *spa = vd->vdev_spa;
|
|
objset_t *mos = spa_meta_objset(spa);
|
|
range_tree_t *alloctree = msp->ms_allocating[txg & TXG_MASK];
|
|
dmu_tx_t *tx;
|
|
uint64_t object = space_map_object(msp->ms_sm);
|
|
|
|
ASSERT(!vd->vdev_ishole);
|
|
|
|
/*
|
|
* This metaslab has just been added so there's no work to do now.
|
|
*/
|
|
if (msp->ms_freeing == NULL) {
|
|
ASSERT3P(alloctree, ==, NULL);
|
|
return;
|
|
}
|
|
|
|
ASSERT3P(alloctree, !=, NULL);
|
|
ASSERT3P(msp->ms_freeing, !=, NULL);
|
|
ASSERT3P(msp->ms_freed, !=, NULL);
|
|
ASSERT3P(msp->ms_checkpointing, !=, NULL);
|
|
|
|
/*
|
|
* Normally, we don't want to process a metaslab if there are no
|
|
* allocations or frees to perform. However, if the metaslab is being
|
|
* forced to condense and it's loaded, we need to let it through.
|
|
*/
|
|
if (range_tree_is_empty(alloctree) &&
|
|
range_tree_is_empty(msp->ms_freeing) &&
|
|
range_tree_is_empty(msp->ms_checkpointing) &&
|
|
!(msp->ms_loaded && msp->ms_condense_wanted))
|
|
return;
|
|
|
|
|
|
VERIFY(txg <= spa_final_dirty_txg(spa));
|
|
|
|
/*
|
|
* The only state that can actually be changing concurrently with
|
|
* metaslab_sync() is the metaslab's ms_allocatable. No other
|
|
* thread can be modifying this txg's alloc, freeing,
|
|
* freed, or space_map_phys_t. We drop ms_lock whenever we
|
|
* could call into the DMU, because the DMU can call down to us
|
|
* (e.g. via zio_free()) at any time.
|
|
*
|
|
* The spa_vdev_remove_thread() can be reading metaslab state
|
|
* concurrently, and it is locked out by the ms_sync_lock. Note
|
|
* that the ms_lock is insufficient for this, because it is dropped
|
|
* by space_map_write().
|
|
*/
|
|
tx = dmu_tx_create_assigned(spa_get_dsl(spa), txg);
|
|
|
|
if (msp->ms_sm == NULL) {
|
|
uint64_t new_object;
|
|
|
|
new_object = space_map_alloc(mos, zfs_metaslab_sm_blksz, tx);
|
|
VERIFY3U(new_object, !=, 0);
|
|
|
|
VERIFY0(space_map_open(&msp->ms_sm, mos, new_object,
|
|
msp->ms_start, msp->ms_size, vd->vdev_ashift));
|
|
ASSERT(msp->ms_sm != NULL);
|
|
}
|
|
|
|
if (!range_tree_is_empty(msp->ms_checkpointing) &&
|
|
vd->vdev_checkpoint_sm == NULL) {
|
|
ASSERT(spa_has_checkpoint(spa));
|
|
|
|
uint64_t new_object = space_map_alloc(mos,
|
|
vdev_standard_sm_blksz, tx);
|
|
VERIFY3U(new_object, !=, 0);
|
|
|
|
VERIFY0(space_map_open(&vd->vdev_checkpoint_sm,
|
|
mos, new_object, 0, vd->vdev_asize, vd->vdev_ashift));
|
|
ASSERT3P(vd->vdev_checkpoint_sm, !=, NULL);
|
|
|
|
/*
|
|
* We save the space map object as an entry in vdev_top_zap
|
|
* so it can be retrieved when the pool is reopened after an
|
|
* export or through zdb.
|
|
*/
|
|
VERIFY0(zap_add(vd->vdev_spa->spa_meta_objset,
|
|
vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM,
|
|
sizeof (new_object), 1, &new_object, tx));
|
|
}
|
|
|
|
mutex_enter(&msp->ms_sync_lock);
|
|
mutex_enter(&msp->ms_lock);
|
|
|
|
/*
|
|
* Note: metaslab_condense() clears the space map's histogram.
|
|
* Therefore we must verify and remove this histogram before
|
|
* condensing.
|
|
*/
|
|
metaslab_group_histogram_verify(mg);
|
|
metaslab_class_histogram_verify(mg->mg_class);
|
|
metaslab_group_histogram_remove(mg, msp);
|
|
|
|
if (msp->ms_loaded && metaslab_should_condense(msp)) {
|
|
metaslab_condense(msp, txg, tx);
|
|
} else {
|
|
mutex_exit(&msp->ms_lock);
|
|
space_map_write(msp->ms_sm, alloctree, SM_ALLOC,
|
|
SM_NO_VDEVID, tx);
|
|
space_map_write(msp->ms_sm, msp->ms_freeing, SM_FREE,
|
|
SM_NO_VDEVID, tx);
|
|
mutex_enter(&msp->ms_lock);
|
|
}
|
|
|
|
if (!range_tree_is_empty(msp->ms_checkpointing)) {
|
|
ASSERT(spa_has_checkpoint(spa));
|
|
ASSERT3P(vd->vdev_checkpoint_sm, !=, NULL);
|
|
|
|
/*
|
|
* Since we are doing writes to disk and the ms_checkpointing
|
|
* tree won't be changing during that time, we drop the
|
|
* ms_lock while writing to the checkpoint space map.
|
|
*/
|
|
mutex_exit(&msp->ms_lock);
|
|
space_map_write(vd->vdev_checkpoint_sm,
|
|
msp->ms_checkpointing, SM_FREE, SM_NO_VDEVID, tx);
|
|
mutex_enter(&msp->ms_lock);
|
|
space_map_update(vd->vdev_checkpoint_sm);
|
|
|
|
spa->spa_checkpoint_info.sci_dspace +=
|
|
range_tree_space(msp->ms_checkpointing);
|
|
vd->vdev_stat.vs_checkpoint_space +=
|
|
range_tree_space(msp->ms_checkpointing);
|
|
ASSERT3U(vd->vdev_stat.vs_checkpoint_space, ==,
|
|
-vd->vdev_checkpoint_sm->sm_alloc);
|
|
|
|
range_tree_vacate(msp->ms_checkpointing, NULL, NULL);
|
|
}
|
|
|
|
if (msp->ms_loaded) {
|
|
/*
|
|
* When the space map is loaded, we have an accurate
|
|
* histogram in the range tree. This gives us an opportunity
|
|
* to bring the space map's histogram up-to-date so we clear
|
|
* it first before updating it.
|
|
*/
|
|
space_map_histogram_clear(msp->ms_sm);
|
|
space_map_histogram_add(msp->ms_sm, msp->ms_allocatable, tx);
|
|
|
|
/*
|
|
* Since we've cleared the histogram we need to add back
|
|
* any free space that has already been processed, plus
|
|
* any deferred space. This allows the on-disk histogram
|
|
* to accurately reflect all free space even if some space
|
|
* is not yet available for allocation (i.e. deferred).
|
|
*/
|
|
space_map_histogram_add(msp->ms_sm, msp->ms_freed, tx);
|
|
|
|
/*
|
|
* Add back any deferred free space that has not been
|
|
* added back into the in-core free tree yet. This will
|
|
* ensure that we don't end up with a space map histogram
|
|
* that is completely empty unless the metaslab is fully
|
|
* allocated.
|
|
*/
|
|
for (int t = 0; t < TXG_DEFER_SIZE; t++) {
|
|
space_map_histogram_add(msp->ms_sm,
|
|
msp->ms_defer[t], tx);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Always add the free space from this sync pass to the space
|
|
* map histogram. We want to make sure that the on-disk histogram
|
|
* accounts for all free space. If the space map is not loaded,
|
|
* then we will lose some accuracy but will correct it the next
|
|
* time we load the space map.
|
|
*/
|
|
space_map_histogram_add(msp->ms_sm, msp->ms_freeing, tx);
|
|
|
|
metaslab_group_histogram_add(mg, msp);
|
|
metaslab_group_histogram_verify(mg);
|
|
metaslab_class_histogram_verify(mg->mg_class);
|
|
|
|
/*
|
|
* For sync pass 1, we avoid traversing this txg's free range tree
|
|
* and instead will just swap the pointers for freeing and
|
|
* freed. We can safely do this since the freed_tree is
|
|
* guaranteed to be empty on the initial pass.
|
|
*/
|
|
if (spa_sync_pass(spa) == 1) {
|
|
range_tree_swap(&msp->ms_freeing, &msp->ms_freed);
|
|
} else {
|
|
range_tree_vacate(msp->ms_freeing,
|
|
range_tree_add, msp->ms_freed);
|
|
}
|
|
range_tree_vacate(alloctree, NULL, NULL);
|
|
|
|
ASSERT0(range_tree_space(msp->ms_allocating[txg & TXG_MASK]));
|
|
ASSERT0(range_tree_space(msp->ms_allocating[TXG_CLEAN(txg)
|
|
& TXG_MASK]));
|
|
ASSERT0(range_tree_space(msp->ms_freeing));
|
|
ASSERT0(range_tree_space(msp->ms_checkpointing));
|
|
|
|
mutex_exit(&msp->ms_lock);
|
|
|
|
if (object != space_map_object(msp->ms_sm)) {
|
|
object = space_map_object(msp->ms_sm);
|
|
dmu_write(mos, vd->vdev_ms_array, sizeof (uint64_t) *
|
|
msp->ms_id, sizeof (uint64_t), &object, tx);
|
|
}
|
|
mutex_exit(&msp->ms_sync_lock);
|
|
dmu_tx_commit(tx);
|
|
}
|
|
|
|
/*
|
|
* Called after a transaction group has completely synced to mark
|
|
* all of the metaslab's free space as usable.
|
|
*/
|
|
void
|
|
metaslab_sync_done(metaslab_t *msp, uint64_t txg)
|
|
{
|
|
metaslab_group_t *mg = msp->ms_group;
|
|
vdev_t *vd = mg->mg_vd;
|
|
spa_t *spa = vd->vdev_spa;
|
|
range_tree_t **defer_tree;
|
|
int64_t alloc_delta, defer_delta;
|
|
boolean_t defer_allowed = B_TRUE;
|
|
|
|
ASSERT(!vd->vdev_ishole);
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
|
|
/*
|
|
* If this metaslab is just becoming available, initialize its
|
|
* range trees and add its capacity to the vdev.
|
|
*/
|
|
if (msp->ms_freed == NULL) {
|
|
for (int t = 0; t < TXG_SIZE; t++) {
|
|
ASSERT(msp->ms_allocating[t] == NULL);
|
|
|
|
msp->ms_allocating[t] = range_tree_create(NULL, NULL);
|
|
}
|
|
|
|
ASSERT3P(msp->ms_freeing, ==, NULL);
|
|
msp->ms_freeing = range_tree_create(NULL, NULL);
|
|
|
|
ASSERT3P(msp->ms_freed, ==, NULL);
|
|
msp->ms_freed = range_tree_create(NULL, NULL);
|
|
|
|
for (int t = 0; t < TXG_DEFER_SIZE; t++) {
|
|
ASSERT(msp->ms_defer[t] == NULL);
|
|
|
|
msp->ms_defer[t] = range_tree_create(NULL, NULL);
|
|
}
|
|
|
|
ASSERT3P(msp->ms_checkpointing, ==, NULL);
|
|
msp->ms_checkpointing = range_tree_create(NULL, NULL);
|
|
|
|
metaslab_space_update(vd, mg->mg_class, 0, 0, msp->ms_size);
|
|
}
|
|
ASSERT0(range_tree_space(msp->ms_freeing));
|
|
ASSERT0(range_tree_space(msp->ms_checkpointing));
|
|
|
|
defer_tree = &msp->ms_defer[txg % TXG_DEFER_SIZE];
|
|
|
|
uint64_t free_space = metaslab_class_get_space(spa_normal_class(spa)) -
|
|
metaslab_class_get_alloc(spa_normal_class(spa));
|
|
if (free_space <= spa_get_slop_space(spa) || vd->vdev_removing) {
|
|
defer_allowed = B_FALSE;
|
|
}
|
|
|
|
defer_delta = 0;
|
|
alloc_delta = space_map_alloc_delta(msp->ms_sm);
|
|
if (defer_allowed) {
|
|
defer_delta = range_tree_space(msp->ms_freed) -
|
|
range_tree_space(*defer_tree);
|
|
} else {
|
|
defer_delta -= range_tree_space(*defer_tree);
|
|
}
|
|
|
|
metaslab_space_update(vd, mg->mg_class, alloc_delta + defer_delta,
|
|
defer_delta, 0);
|
|
|
|
/*
|
|
* If there's a metaslab_load() in progress, wait for it to complete
|
|
* so that we have a consistent view of the in-core space map.
|
|
*/
|
|
metaslab_load_wait(msp);
|
|
|
|
/*
|
|
* Move the frees from the defer_tree back to the free
|
|
* range tree (if it's loaded). Swap the freed_tree and
|
|
* the defer_tree -- this is safe to do because we've
|
|
* just emptied out the defer_tree.
|
|
*/
|
|
range_tree_vacate(*defer_tree,
|
|
msp->ms_loaded ? range_tree_add : NULL, msp->ms_allocatable);
|
|
if (defer_allowed) {
|
|
range_tree_swap(&msp->ms_freed, defer_tree);
|
|
} else {
|
|
range_tree_vacate(msp->ms_freed,
|
|
msp->ms_loaded ? range_tree_add : NULL,
|
|
msp->ms_allocatable);
|
|
}
|
|
space_map_update(msp->ms_sm);
|
|
|
|
msp->ms_deferspace += defer_delta;
|
|
ASSERT3S(msp->ms_deferspace, >=, 0);
|
|
ASSERT3S(msp->ms_deferspace, <=, msp->ms_size);
|
|
if (msp->ms_deferspace != 0) {
|
|
/*
|
|
* Keep syncing this metaslab until all deferred frees
|
|
* are back in circulation.
|
|
*/
|
|
vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
|
|
}
|
|
|
|
if (msp->ms_new) {
|
|
msp->ms_new = B_FALSE;
|
|
mutex_enter(&mg->mg_lock);
|
|
mg->mg_ms_ready++;
|
|
mutex_exit(&mg->mg_lock);
|
|
}
|
|
/*
|
|
* Calculate the new weights before unloading any metaslabs.
|
|
* This will give us the most accurate weighting.
|
|
*/
|
|
metaslab_group_sort(mg, msp, metaslab_weight(msp) |
|
|
(msp->ms_weight & METASLAB_ACTIVE_MASK));
|
|
|
|
/*
|
|
* If the metaslab is loaded and we've not tried to load or allocate
|
|
* from it in 'metaslab_unload_delay' txgs, then unload it.
|
|
*/
|
|
if (msp->ms_loaded &&
|
|
msp->ms_selected_txg + metaslab_unload_delay < txg) {
|
|
|
|
for (int t = 1; t < TXG_CONCURRENT_STATES; t++) {
|
|
VERIFY0(range_tree_space(
|
|
msp->ms_allocating[(txg + t) & TXG_MASK]));
|
|
}
|
|
if (msp->ms_allocator != -1) {
|
|
metaslab_passivate(msp, msp->ms_weight &
|
|
~METASLAB_ACTIVE_MASK);
|
|
}
|
|
|
|
if (!metaslab_debug_unload)
|
|
metaslab_unload(msp);
|
|
}
|
|
|
|
ASSERT0(range_tree_space(msp->ms_allocating[txg & TXG_MASK]));
|
|
ASSERT0(range_tree_space(msp->ms_freeing));
|
|
ASSERT0(range_tree_space(msp->ms_freed));
|
|
ASSERT0(range_tree_space(msp->ms_checkpointing));
|
|
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
|
|
void
|
|
metaslab_sync_reassess(metaslab_group_t *mg)
|
|
{
|
|
spa_t *spa = mg->mg_class->mc_spa;
|
|
|
|
spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);
|
|
metaslab_group_alloc_update(mg);
|
|
mg->mg_fragmentation = metaslab_group_fragmentation(mg);
|
|
|
|
/*
|
|
* Preload the next potential metaslabs but only on active
|
|
* metaslab groups. We can get into a state where the metaslab
|
|
* is no longer active since we dirty metaslabs as we remove a
|
|
* a device, thus potentially making the metaslab group eligible
|
|
* for preloading.
|
|
*/
|
|
if (mg->mg_activation_count > 0) {
|
|
metaslab_group_preload(mg);
|
|
}
|
|
spa_config_exit(spa, SCL_ALLOC, FTAG);
|
|
}
|
|
|
|
/*
|
|
* When writing a ditto block (i.e. more than one DVA for a given BP) on
|
|
* the same vdev as an existing DVA of this BP, then try to allocate it
|
|
* on a different metaslab than existing DVAs (i.e. a unique metaslab).
|
|
*/
|
|
static boolean_t
|
|
metaslab_is_unique(metaslab_t *msp, dva_t *dva)
|
|
{
|
|
uint64_t dva_ms_id;
|
|
|
|
if (DVA_GET_ASIZE(dva) == 0)
|
|
return (B_TRUE);
|
|
|
|
if (msp->ms_group->mg_vd->vdev_id != DVA_GET_VDEV(dva))
|
|
return (B_TRUE);
|
|
|
|
dva_ms_id = DVA_GET_OFFSET(dva) >> msp->ms_group->mg_vd->vdev_ms_shift;
|
|
|
|
return (msp->ms_id != dva_ms_id);
|
|
}
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Metaslab allocation tracing facility
|
|
* ==========================================================================
|
|
*/
|
|
#ifdef _METASLAB_TRACING
|
|
kstat_t *metaslab_trace_ksp;
|
|
kstat_named_t metaslab_trace_over_limit;
|
|
|
|
void
|
|
metaslab_alloc_trace_init(void)
|
|
{
|
|
ASSERT(metaslab_alloc_trace_cache == NULL);
|
|
metaslab_alloc_trace_cache = kmem_cache_create(
|
|
"metaslab_alloc_trace_cache", sizeof (metaslab_alloc_trace_t),
|
|
0, NULL, NULL, NULL, NULL, NULL, 0);
|
|
metaslab_trace_ksp = kstat_create("zfs", 0, "metaslab_trace_stats",
|
|
"misc", KSTAT_TYPE_NAMED, 1, KSTAT_FLAG_VIRTUAL);
|
|
if (metaslab_trace_ksp != NULL) {
|
|
metaslab_trace_ksp->ks_data = &metaslab_trace_over_limit;
|
|
kstat_named_init(&metaslab_trace_over_limit,
|
|
"metaslab_trace_over_limit", KSTAT_DATA_UINT64);
|
|
kstat_install(metaslab_trace_ksp);
|
|
}
|
|
}
|
|
|
|
void
|
|
metaslab_alloc_trace_fini(void)
|
|
{
|
|
if (metaslab_trace_ksp != NULL) {
|
|
kstat_delete(metaslab_trace_ksp);
|
|
metaslab_trace_ksp = NULL;
|
|
}
|
|
kmem_cache_destroy(metaslab_alloc_trace_cache);
|
|
metaslab_alloc_trace_cache = NULL;
|
|
}
|
|
|
|
/*
|
|
* Add an allocation trace element to the allocation tracing list.
|
|
*/
|
|
static void
|
|
metaslab_trace_add(zio_alloc_list_t *zal, metaslab_group_t *mg,
|
|
metaslab_t *msp, uint64_t psize, uint32_t dva_id, uint64_t offset,
|
|
int allocator)
|
|
{
|
|
metaslab_alloc_trace_t *mat;
|
|
|
|
if (!metaslab_trace_enabled)
|
|
return;
|
|
|
|
/*
|
|
* When the tracing list reaches its maximum we remove
|
|
* the second element in the list before adding a new one.
|
|
* By removing the second element we preserve the original
|
|
* entry as a clue to what allocations steps have already been
|
|
* performed.
|
|
*/
|
|
if (zal->zal_size == metaslab_trace_max_entries) {
|
|
metaslab_alloc_trace_t *mat_next;
|
|
#ifdef DEBUG
|
|
panic("too many entries in allocation list");
|
|
#endif
|
|
atomic_inc_64(&metaslab_trace_over_limit.value.ui64);
|
|
zal->zal_size--;
|
|
mat_next = list_next(&zal->zal_list, list_head(&zal->zal_list));
|
|
list_remove(&zal->zal_list, mat_next);
|
|
kmem_cache_free(metaslab_alloc_trace_cache, mat_next);
|
|
}
|
|
|
|
mat = kmem_cache_alloc(metaslab_alloc_trace_cache, KM_SLEEP);
|
|
list_link_init(&mat->mat_list_node);
|
|
mat->mat_mg = mg;
|
|
mat->mat_msp = msp;
|
|
mat->mat_size = psize;
|
|
mat->mat_dva_id = dva_id;
|
|
mat->mat_offset = offset;
|
|
mat->mat_weight = 0;
|
|
mat->mat_allocator = allocator;
|
|
|
|
if (msp != NULL)
|
|
mat->mat_weight = msp->ms_weight;
|
|
|
|
/*
|
|
* The list is part of the zio so locking is not required. Only
|
|
* a single thread will perform allocations for a given zio.
|
|
*/
|
|
list_insert_tail(&zal->zal_list, mat);
|
|
zal->zal_size++;
|
|
|
|
ASSERT3U(zal->zal_size, <=, metaslab_trace_max_entries);
|
|
}
|
|
|
|
void
|
|
metaslab_trace_init(zio_alloc_list_t *zal)
|
|
{
|
|
list_create(&zal->zal_list, sizeof (metaslab_alloc_trace_t),
|
|
offsetof(metaslab_alloc_trace_t, mat_list_node));
|
|
zal->zal_size = 0;
|
|
}
|
|
|
|
void
|
|
metaslab_trace_fini(zio_alloc_list_t *zal)
|
|
{
|
|
metaslab_alloc_trace_t *mat;
|
|
|
|
while ((mat = list_remove_head(&zal->zal_list)) != NULL)
|
|
kmem_cache_free(metaslab_alloc_trace_cache, mat);
|
|
list_destroy(&zal->zal_list);
|
|
zal->zal_size = 0;
|
|
}
|
|
#else
|
|
|
|
#define metaslab_trace_add(zal, mg, msp, psize, id, off, alloc)
|
|
|
|
void
|
|
metaslab_alloc_trace_init(void)
|
|
{
|
|
}
|
|
|
|
void
|
|
metaslab_alloc_trace_fini(void)
|
|
{
|
|
}
|
|
|
|
void
|
|
metaslab_trace_init(zio_alloc_list_t *zal)
|
|
{
|
|
}
|
|
|
|
void
|
|
metaslab_trace_fini(zio_alloc_list_t *zal)
|
|
{
|
|
}
|
|
|
|
#endif /* _METASLAB_TRACING */
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* Metaslab block operations
|
|
* ==========================================================================
|
|
*/
|
|
|
|
static void
|
|
metaslab_group_alloc_increment(spa_t *spa, uint64_t vdev, void *tag, int flags,
|
|
int allocator)
|
|
{
|
|
if (!(flags & METASLAB_ASYNC_ALLOC) ||
|
|
(flags & METASLAB_DONT_THROTTLE))
|
|
return;
|
|
|
|
metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
|
|
if (!mg->mg_class->mc_alloc_throttle_enabled)
|
|
return;
|
|
|
|
(void) zfs_refcount_add(&mg->mg_alloc_queue_depth[allocator], tag);
|
|
}
|
|
|
|
static void
|
|
metaslab_group_increment_qdepth(metaslab_group_t *mg, int allocator)
|
|
{
|
|
uint64_t max = mg->mg_max_alloc_queue_depth;
|
|
uint64_t cur = mg->mg_cur_max_alloc_queue_depth[allocator];
|
|
while (cur < max) {
|
|
if (atomic_cas_64(&mg->mg_cur_max_alloc_queue_depth[allocator],
|
|
cur, cur + 1) == cur) {
|
|
atomic_inc_64(
|
|
&mg->mg_class->mc_alloc_max_slots[allocator]);
|
|
return;
|
|
}
|
|
cur = mg->mg_cur_max_alloc_queue_depth[allocator];
|
|
}
|
|
}
|
|
|
|
void
|
|
metaslab_group_alloc_decrement(spa_t *spa, uint64_t vdev, void *tag, int flags,
|
|
int allocator, boolean_t io_complete)
|
|
{
|
|
if (!(flags & METASLAB_ASYNC_ALLOC) ||
|
|
(flags & METASLAB_DONT_THROTTLE))
|
|
return;
|
|
|
|
metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
|
|
if (!mg->mg_class->mc_alloc_throttle_enabled)
|
|
return;
|
|
|
|
(void) zfs_refcount_remove(&mg->mg_alloc_queue_depth[allocator], tag);
|
|
if (io_complete)
|
|
metaslab_group_increment_qdepth(mg, allocator);
|
|
}
|
|
|
|
void
|
|
metaslab_group_alloc_verify(spa_t *spa, const blkptr_t *bp, void *tag,
|
|
int allocator)
|
|
{
|
|
#ifdef ZFS_DEBUG
|
|
const dva_t *dva = bp->blk_dva;
|
|
int ndvas = BP_GET_NDVAS(bp);
|
|
|
|
for (int d = 0; d < ndvas; d++) {
|
|
uint64_t vdev = DVA_GET_VDEV(&dva[d]);
|
|
metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
|
|
VERIFY(zfs_refcount_not_held(
|
|
&mg->mg_alloc_queue_depth[allocator], tag));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static uint64_t
|
|
metaslab_block_alloc(metaslab_t *msp, uint64_t size, uint64_t txg)
|
|
{
|
|
uint64_t start;
|
|
range_tree_t *rt = msp->ms_allocatable;
|
|
metaslab_class_t *mc = msp->ms_group->mg_class;
|
|
|
|
VERIFY(!msp->ms_condensing);
|
|
|
|
start = mc->mc_ops->msop_alloc(msp, size);
|
|
if (start != -1ULL) {
|
|
metaslab_group_t *mg = msp->ms_group;
|
|
vdev_t *vd = mg->mg_vd;
|
|
|
|
VERIFY0(P2PHASE(start, 1ULL << vd->vdev_ashift));
|
|
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
|
|
VERIFY3U(range_tree_space(rt) - size, <=, msp->ms_size);
|
|
range_tree_remove(rt, start, size);
|
|
|
|
if (range_tree_is_empty(msp->ms_allocating[txg & TXG_MASK]))
|
|
vdev_dirty(mg->mg_vd, VDD_METASLAB, msp, txg);
|
|
|
|
range_tree_add(msp->ms_allocating[txg & TXG_MASK], start, size);
|
|
|
|
/* Track the last successful allocation */
|
|
msp->ms_alloc_txg = txg;
|
|
metaslab_verify_space(msp, txg);
|
|
}
|
|
|
|
/*
|
|
* Now that we've attempted the allocation we need to update the
|
|
* metaslab's maximum block size since it may have changed.
|
|
*/
|
|
msp->ms_max_size = metaslab_block_maxsize(msp);
|
|
return (start);
|
|
}
|
|
|
|
/*
|
|
* Find the metaslab with the highest weight that is less than what we've
|
|
* already tried. In the common case, this means that we will examine each
|
|
* metaslab at most once. Note that concurrent callers could reorder metaslabs
|
|
* by activation/passivation once we have dropped the mg_lock. If a metaslab is
|
|
* activated by another thread, and we fail to allocate from the metaslab we
|
|
* have selected, we may not try the newly-activated metaslab, and instead
|
|
* activate another metaslab. This is not optimal, but generally does not cause
|
|
* any problems (a possible exception being if every metaslab is completely full
|
|
* except for the the newly-activated metaslab which we fail to examine).
|
|
*/
|
|
static metaslab_t *
|
|
find_valid_metaslab(metaslab_group_t *mg, uint64_t activation_weight,
|
|
dva_t *dva, int d, boolean_t want_unique, uint64_t asize, int allocator,
|
|
zio_alloc_list_t *zal, metaslab_t *search, boolean_t *was_active)
|
|
{
|
|
avl_index_t idx;
|
|
avl_tree_t *t = &mg->mg_metaslab_tree;
|
|
metaslab_t *msp = avl_find(t, search, &idx);
|
|
if (msp == NULL)
|
|
msp = avl_nearest(t, idx, AVL_AFTER);
|
|
|
|
for (; msp != NULL; msp = AVL_NEXT(t, msp)) {
|
|
int i;
|
|
if (!metaslab_should_allocate(msp, asize)) {
|
|
metaslab_trace_add(zal, mg, msp, asize, d,
|
|
TRACE_TOO_SMALL, allocator);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the selected metaslab is condensing, skip it.
|
|
*/
|
|
if (msp->ms_condensing)
|
|
continue;
|
|
|
|
*was_active = msp->ms_allocator != -1;
|
|
/*
|
|
* If we're activating as primary, this is our first allocation
|
|
* from this disk, so we don't need to check how close we are.
|
|
* If the metaslab under consideration was already active,
|
|
* we're getting desperate enough to steal another allocator's
|
|
* metaslab, so we still don't care about distances.
|
|
*/
|
|
if (activation_weight == METASLAB_WEIGHT_PRIMARY || *was_active)
|
|
break;
|
|
|
|
for (i = 0; i < d; i++) {
|
|
if (want_unique &&
|
|
!metaslab_is_unique(msp, &dva[i]))
|
|
break; /* try another metaslab */
|
|
}
|
|
if (i == d)
|
|
break;
|
|
}
|
|
|
|
if (msp != NULL) {
|
|
search->ms_weight = msp->ms_weight;
|
|
search->ms_start = msp->ms_start + 1;
|
|
search->ms_allocator = msp->ms_allocator;
|
|
search->ms_primary = msp->ms_primary;
|
|
}
|
|
return (msp);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static uint64_t
|
|
metaslab_group_alloc_normal(metaslab_group_t *mg, zio_alloc_list_t *zal,
|
|
uint64_t asize, uint64_t txg, boolean_t want_unique, dva_t *dva,
|
|
int d, int allocator)
|
|
{
|
|
metaslab_t *msp = NULL;
|
|
uint64_t offset = -1ULL;
|
|
uint64_t activation_weight;
|
|
|
|
activation_weight = METASLAB_WEIGHT_PRIMARY;
|
|
for (int i = 0; i < d; i++) {
|
|
if (activation_weight == METASLAB_WEIGHT_PRIMARY &&
|
|
DVA_GET_VDEV(&dva[i]) == mg->mg_vd->vdev_id) {
|
|
activation_weight = METASLAB_WEIGHT_SECONDARY;
|
|
} else if (activation_weight == METASLAB_WEIGHT_SECONDARY &&
|
|
DVA_GET_VDEV(&dva[i]) == mg->mg_vd->vdev_id) {
|
|
activation_weight = METASLAB_WEIGHT_CLAIM;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we don't have enough metaslabs active to fill the entire array, we
|
|
* just use the 0th slot.
|
|
*/
|
|
if (mg->mg_ms_ready < mg->mg_allocators * 3)
|
|
allocator = 0;
|
|
|
|
ASSERT3U(mg->mg_vd->vdev_ms_count, >=, 2);
|
|
|
|
metaslab_t *search = kmem_alloc(sizeof (*search), KM_SLEEP);
|
|
search->ms_weight = UINT64_MAX;
|
|
search->ms_start = 0;
|
|
/*
|
|
* At the end of the metaslab tree are the already-active metaslabs,
|
|
* first the primaries, then the secondaries. When we resume searching
|
|
* through the tree, we need to consider ms_allocator and ms_primary so
|
|
* we start in the location right after where we left off, and don't
|
|
* accidentally loop forever considering the same metaslabs.
|
|
*/
|
|
search->ms_allocator = -1;
|
|
search->ms_primary = B_TRUE;
|
|
for (;;) {
|
|
boolean_t was_active = B_FALSE;
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
|
|
if (activation_weight == METASLAB_WEIGHT_PRIMARY &&
|
|
mg->mg_primaries[allocator] != NULL) {
|
|
msp = mg->mg_primaries[allocator];
|
|
was_active = B_TRUE;
|
|
} else if (activation_weight == METASLAB_WEIGHT_SECONDARY &&
|
|
mg->mg_secondaries[allocator] != NULL) {
|
|
msp = mg->mg_secondaries[allocator];
|
|
was_active = B_TRUE;
|
|
} else {
|
|
msp = find_valid_metaslab(mg, activation_weight, dva, d,
|
|
want_unique, asize, allocator, zal, search,
|
|
&was_active);
|
|
}
|
|
|
|
mutex_exit(&mg->mg_lock);
|
|
if (msp == NULL) {
|
|
kmem_free(search, sizeof (*search));
|
|
return (-1ULL);
|
|
}
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
/*
|
|
* Ensure that the metaslab we have selected is still
|
|
* capable of handling our request. It's possible that
|
|
* another thread may have changed the weight while we
|
|
* were blocked on the metaslab lock. We check the
|
|
* active status first to see if we need to reselect
|
|
* a new metaslab.
|
|
*/
|
|
if (was_active && !(msp->ms_weight & METASLAB_ACTIVE_MASK)) {
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the metaslab is freshly activated for an allocator that
|
|
* isn't the one we're allocating from, or if it's a primary and
|
|
* we're seeking a secondary (or vice versa), we go back and
|
|
* select a new metaslab.
|
|
*/
|
|
if (!was_active && (msp->ms_weight & METASLAB_ACTIVE_MASK) &&
|
|
(msp->ms_allocator != -1) &&
|
|
(msp->ms_allocator != allocator || ((activation_weight ==
|
|
METASLAB_WEIGHT_PRIMARY) != msp->ms_primary))) {
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
if (msp->ms_weight & METASLAB_WEIGHT_CLAIM &&
|
|
activation_weight != METASLAB_WEIGHT_CLAIM) {
|
|
metaslab_passivate(msp, msp->ms_weight &
|
|
~METASLAB_WEIGHT_CLAIM);
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
if (metaslab_activate(msp, allocator, activation_weight) != 0) {
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
msp->ms_selected_txg = txg;
|
|
|
|
/*
|
|
* Now that we have the lock, recheck to see if we should
|
|
* continue to use this metaslab for this allocation. The
|
|
* the metaslab is now loaded so metaslab_should_allocate() can
|
|
* accurately determine if the allocation attempt should
|
|
* proceed.
|
|
*/
|
|
if (!metaslab_should_allocate(msp, asize)) {
|
|
/* Passivate this metaslab and select a new one. */
|
|
metaslab_trace_add(zal, mg, msp, asize, d,
|
|
TRACE_TOO_SMALL, allocator);
|
|
goto next;
|
|
}
|
|
|
|
|
|
/*
|
|
* If this metaslab is currently condensing then pick again as
|
|
* we can't manipulate this metaslab until it's committed
|
|
* to disk.
|
|
*/
|
|
if (msp->ms_condensing) {
|
|
metaslab_trace_add(zal, mg, msp, asize, d,
|
|
TRACE_CONDENSING, allocator);
|
|
metaslab_passivate(msp, msp->ms_weight &
|
|
~METASLAB_ACTIVE_MASK);
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
offset = metaslab_block_alloc(msp, asize, txg);
|
|
metaslab_trace_add(zal, mg, msp, asize, d, offset, allocator);
|
|
|
|
if (offset != -1ULL) {
|
|
/* Proactively passivate the metaslab, if needed */
|
|
metaslab_segment_may_passivate(msp);
|
|
break;
|
|
}
|
|
next:
|
|
ASSERT(msp->ms_loaded);
|
|
|
|
/*
|
|
* We were unable to allocate from this metaslab so determine
|
|
* a new weight for this metaslab. Now that we have loaded
|
|
* the metaslab we can provide a better hint to the metaslab
|
|
* selector.
|
|
*
|
|
* For space-based metaslabs, we use the maximum block size.
|
|
* This information is only available when the metaslab
|
|
* is loaded and is more accurate than the generic free
|
|
* space weight that was calculated by metaslab_weight().
|
|
* This information allows us to quickly compare the maximum
|
|
* available allocation in the metaslab to the allocation
|
|
* size being requested.
|
|
*
|
|
* For segment-based metaslabs, determine the new weight
|
|
* based on the highest bucket in the range tree. We
|
|
* explicitly use the loaded segment weight (i.e. the range
|
|
* tree histogram) since it contains the space that is
|
|
* currently available for allocation and is accurate
|
|
* even within a sync pass.
|
|
*/
|
|
if (WEIGHT_IS_SPACEBASED(msp->ms_weight)) {
|
|
uint64_t weight = metaslab_block_maxsize(msp);
|
|
WEIGHT_SET_SPACEBASED(weight);
|
|
metaslab_passivate(msp, weight);
|
|
} else {
|
|
metaslab_passivate(msp,
|
|
metaslab_weight_from_range_tree(msp));
|
|
}
|
|
|
|
/*
|
|
* We have just failed an allocation attempt, check
|
|
* that metaslab_should_allocate() agrees. Otherwise,
|
|
* we may end up in an infinite loop retrying the same
|
|
* metaslab.
|
|
*/
|
|
ASSERT(!metaslab_should_allocate(msp, asize));
|
|
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
mutex_exit(&msp->ms_lock);
|
|
kmem_free(search, sizeof (*search));
|
|
return (offset);
|
|
}
|
|
|
|
static uint64_t
|
|
metaslab_group_alloc(metaslab_group_t *mg, zio_alloc_list_t *zal,
|
|
uint64_t asize, uint64_t txg, boolean_t want_unique, dva_t *dva,
|
|
int d, int allocator)
|
|
{
|
|
uint64_t offset;
|
|
ASSERT(mg->mg_initialized);
|
|
|
|
offset = metaslab_group_alloc_normal(mg, zal, asize, txg, want_unique,
|
|
dva, d, allocator);
|
|
|
|
mutex_enter(&mg->mg_lock);
|
|
if (offset == -1ULL) {
|
|
mg->mg_failed_allocations++;
|
|
metaslab_trace_add(zal, mg, NULL, asize, d,
|
|
TRACE_GROUP_FAILURE, allocator);
|
|
if (asize == SPA_GANGBLOCKSIZE) {
|
|
/*
|
|
* This metaslab group was unable to allocate
|
|
* the minimum gang block size so it must be out of
|
|
* space. We must notify the allocation throttle
|
|
* to start skipping allocation attempts to this
|
|
* metaslab group until more space becomes available.
|
|
* Note: this failure cannot be caused by the
|
|
* allocation throttle since the allocation throttle
|
|
* is only responsible for skipping devices and
|
|
* not failing block allocations.
|
|
*/
|
|
mg->mg_no_free_space = B_TRUE;
|
|
}
|
|
}
|
|
mg->mg_allocations++;
|
|
mutex_exit(&mg->mg_lock);
|
|
return (offset);
|
|
}
|
|
|
|
/*
|
|
* Allocate a block for the specified i/o.
|
|
*/
|
|
int
|
|
metaslab_alloc_dva(spa_t *spa, metaslab_class_t *mc, uint64_t psize,
|
|
dva_t *dva, int d, dva_t *hintdva, uint64_t txg, int flags,
|
|
zio_alloc_list_t *zal, int allocator)
|
|
{
|
|
metaslab_group_t *mg, *fast_mg, *rotor;
|
|
vdev_t *vd;
|
|
boolean_t try_hard = B_FALSE;
|
|
|
|
ASSERT(!DVA_IS_VALID(&dva[d]));
|
|
|
|
/*
|
|
* For testing, make some blocks above a certain size be gang blocks.
|
|
* This will result in more split blocks when using device removal,
|
|
* and a large number of split blocks coupled with ztest-induced
|
|
* damage can result in extremely long reconstruction times. This
|
|
* will also test spilling from special to normal.
|
|
*/
|
|
if (psize >= metaslab_force_ganging && (spa_get_random(100) < 3)) {
|
|
metaslab_trace_add(zal, NULL, NULL, psize, d, TRACE_FORCE_GANG,
|
|
allocator);
|
|
return (SET_ERROR(ENOSPC));
|
|
}
|
|
|
|
/*
|
|
* Start at the rotor and loop through all mgs until we find something.
|
|
* Note that there's no locking on mc_rotor or mc_aliquot because
|
|
* nothing actually breaks if we miss a few updates -- we just won't
|
|
* allocate quite as evenly. It all balances out over time.
|
|
*
|
|
* If we are doing ditto or log blocks, try to spread them across
|
|
* consecutive vdevs. If we're forced to reuse a vdev before we've
|
|
* allocated all of our ditto blocks, then try and spread them out on
|
|
* that vdev as much as possible. If it turns out to not be possible,
|
|
* gradually lower our standards until anything becomes acceptable.
|
|
* Also, allocating on consecutive vdevs (as opposed to random vdevs)
|
|
* gives us hope of containing our fault domains to something we're
|
|
* able to reason about. Otherwise, any two top-level vdev failures
|
|
* will guarantee the loss of data. With consecutive allocation,
|
|
* only two adjacent top-level vdev failures will result in data loss.
|
|
*
|
|
* If we are doing gang blocks (hintdva is non-NULL), try to keep
|
|
* ourselves on the same vdev as our gang block header. That
|
|
* way, we can hope for locality in vdev_cache, plus it makes our
|
|
* fault domains something tractable.
|
|
*/
|
|
if (hintdva) {
|
|
vd = vdev_lookup_top(spa, DVA_GET_VDEV(&hintdva[d]));
|
|
|
|
/*
|
|
* It's possible the vdev we're using as the hint no
|
|
* longer exists or its mg has been closed (e.g. by
|
|
* device removal). Consult the rotor when
|
|
* all else fails.
|
|
*/
|
|
if (vd != NULL && vd->vdev_mg != NULL) {
|
|
mg = vd->vdev_mg;
|
|
|
|
if (flags & METASLAB_HINTBP_AVOID &&
|
|
mg->mg_next != NULL)
|
|
mg = mg->mg_next;
|
|
} else {
|
|
mg = mc->mc_rotor;
|
|
}
|
|
} else if (d != 0) {
|
|
vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d - 1]));
|
|
mg = vd->vdev_mg->mg_next;
|
|
} else if (flags & METASLAB_FASTWRITE) {
|
|
mg = fast_mg = mc->mc_rotor;
|
|
|
|
do {
|
|
if (fast_mg->mg_vd->vdev_pending_fastwrite <
|
|
mg->mg_vd->vdev_pending_fastwrite)
|
|
mg = fast_mg;
|
|
} while ((fast_mg = fast_mg->mg_next) != mc->mc_rotor);
|
|
|
|
} else {
|
|
ASSERT(mc->mc_rotor != NULL);
|
|
mg = mc->mc_rotor;
|
|
}
|
|
|
|
/*
|
|
* If the hint put us into the wrong metaslab class, or into a
|
|
* metaslab group that has been passivated, just follow the rotor.
|
|
*/
|
|
if (mg->mg_class != mc || mg->mg_activation_count <= 0)
|
|
mg = mc->mc_rotor;
|
|
|
|
rotor = mg;
|
|
top:
|
|
do {
|
|
boolean_t allocatable;
|
|
|
|
ASSERT(mg->mg_activation_count == 1);
|
|
vd = mg->mg_vd;
|
|
|
|
/*
|
|
* Don't allocate from faulted devices.
|
|
*/
|
|
if (try_hard) {
|
|
spa_config_enter(spa, SCL_ZIO, FTAG, RW_READER);
|
|
allocatable = vdev_allocatable(vd);
|
|
spa_config_exit(spa, SCL_ZIO, FTAG);
|
|
} else {
|
|
allocatable = vdev_allocatable(vd);
|
|
}
|
|
|
|
/*
|
|
* Determine if the selected metaslab group is eligible
|
|
* for allocations. If we're ganging then don't allow
|
|
* this metaslab group to skip allocations since that would
|
|
* inadvertently return ENOSPC and suspend the pool
|
|
* even though space is still available.
|
|
*/
|
|
if (allocatable && !GANG_ALLOCATION(flags) && !try_hard) {
|
|
allocatable = metaslab_group_allocatable(mg, rotor,
|
|
psize, allocator, d);
|
|
}
|
|
|
|
if (!allocatable) {
|
|
metaslab_trace_add(zal, mg, NULL, psize, d,
|
|
TRACE_NOT_ALLOCATABLE, allocator);
|
|
goto next;
|
|
}
|
|
|
|
ASSERT(mg->mg_initialized);
|
|
|
|
/*
|
|
* Avoid writing single-copy data to a failing,
|
|
* non-redundant vdev, unless we've already tried all
|
|
* other vdevs.
|
|
*/
|
|
if ((vd->vdev_stat.vs_write_errors > 0 ||
|
|
vd->vdev_state < VDEV_STATE_HEALTHY) &&
|
|
d == 0 && !try_hard && vd->vdev_children == 0) {
|
|
metaslab_trace_add(zal, mg, NULL, psize, d,
|
|
TRACE_VDEV_ERROR, allocator);
|
|
goto next;
|
|
}
|
|
|
|
ASSERT(mg->mg_class == mc);
|
|
|
|
uint64_t asize = vdev_psize_to_asize(vd, psize);
|
|
ASSERT(P2PHASE(asize, 1ULL << vd->vdev_ashift) == 0);
|
|
|
|
/*
|
|
* If we don't need to try hard, then require that the
|
|
* block be on an different metaslab from any other DVAs
|
|
* in this BP (unique=true). If we are trying hard, then
|
|
* allow any metaslab to be used (unique=false).
|
|
*/
|
|
uint64_t offset = metaslab_group_alloc(mg, zal, asize, txg,
|
|
!try_hard, dva, d, allocator);
|
|
|
|
if (offset != -1ULL) {
|
|
/*
|
|
* If we've just selected this metaslab group,
|
|
* figure out whether the corresponding vdev is
|
|
* over- or under-used relative to the pool,
|
|
* and set an allocation bias to even it out.
|
|
*
|
|
* Bias is also used to compensate for unequally
|
|
* sized vdevs so that space is allocated fairly.
|
|
*/
|
|
if (mc->mc_aliquot == 0 && metaslab_bias_enabled) {
|
|
vdev_stat_t *vs = &vd->vdev_stat;
|
|
int64_t vs_free = vs->vs_space - vs->vs_alloc;
|
|
int64_t mc_free = mc->mc_space - mc->mc_alloc;
|
|
int64_t ratio;
|
|
|
|
/*
|
|
* Calculate how much more or less we should
|
|
* try to allocate from this device during
|
|
* this iteration around the rotor.
|
|
*
|
|
* This basically introduces a zero-centered
|
|
* bias towards the devices with the most
|
|
* free space, while compensating for vdev
|
|
* size differences.
|
|
*
|
|
* Examples:
|
|
* vdev V1 = 16M/128M
|
|
* vdev V2 = 16M/128M
|
|
* ratio(V1) = 100% ratio(V2) = 100%
|
|
*
|
|
* vdev V1 = 16M/128M
|
|
* vdev V2 = 64M/128M
|
|
* ratio(V1) = 127% ratio(V2) = 72%
|
|
*
|
|
* vdev V1 = 16M/128M
|
|
* vdev V2 = 64M/512M
|
|
* ratio(V1) = 40% ratio(V2) = 160%
|
|
*/
|
|
ratio = (vs_free * mc->mc_alloc_groups * 100) /
|
|
(mc_free + 1);
|
|
mg->mg_bias = ((ratio - 100) *
|
|
(int64_t)mg->mg_aliquot) / 100;
|
|
} else if (!metaslab_bias_enabled) {
|
|
mg->mg_bias = 0;
|
|
}
|
|
|
|
if ((flags & METASLAB_FASTWRITE) ||
|
|
atomic_add_64_nv(&mc->mc_aliquot, asize) >=
|
|
mg->mg_aliquot + mg->mg_bias) {
|
|
mc->mc_rotor = mg->mg_next;
|
|
mc->mc_aliquot = 0;
|
|
}
|
|
|
|
DVA_SET_VDEV(&dva[d], vd->vdev_id);
|
|
DVA_SET_OFFSET(&dva[d], offset);
|
|
DVA_SET_GANG(&dva[d],
|
|
((flags & METASLAB_GANG_HEADER) ? 1 : 0));
|
|
DVA_SET_ASIZE(&dva[d], asize);
|
|
|
|
if (flags & METASLAB_FASTWRITE) {
|
|
atomic_add_64(&vd->vdev_pending_fastwrite,
|
|
psize);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
next:
|
|
mc->mc_rotor = mg->mg_next;
|
|
mc->mc_aliquot = 0;
|
|
} while ((mg = mg->mg_next) != rotor);
|
|
|
|
/*
|
|
* If we haven't tried hard, do so now.
|
|
*/
|
|
if (!try_hard) {
|
|
try_hard = B_TRUE;
|
|
goto top;
|
|
}
|
|
|
|
bzero(&dva[d], sizeof (dva_t));
|
|
|
|
metaslab_trace_add(zal, rotor, NULL, psize, d, TRACE_ENOSPC, allocator);
|
|
return (SET_ERROR(ENOSPC));
|
|
}
|
|
|
|
void
|
|
metaslab_free_concrete(vdev_t *vd, uint64_t offset, uint64_t asize,
|
|
boolean_t checkpoint)
|
|
{
|
|
metaslab_t *msp;
|
|
spa_t *spa = vd->vdev_spa;
|
|
|
|
ASSERT(vdev_is_concrete(vd));
|
|
ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);
|
|
ASSERT3U(offset >> vd->vdev_ms_shift, <, vd->vdev_ms_count);
|
|
|
|
msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
|
|
|
|
VERIFY(!msp->ms_condensing);
|
|
VERIFY3U(offset, >=, msp->ms_start);
|
|
VERIFY3U(offset + asize, <=, msp->ms_start + msp->ms_size);
|
|
VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
|
|
VERIFY0(P2PHASE(asize, 1ULL << vd->vdev_ashift));
|
|
|
|
metaslab_check_free_impl(vd, offset, asize);
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
if (range_tree_is_empty(msp->ms_freeing) &&
|
|
range_tree_is_empty(msp->ms_checkpointing)) {
|
|
vdev_dirty(vd, VDD_METASLAB, msp, spa_syncing_txg(spa));
|
|
}
|
|
|
|
if (checkpoint) {
|
|
ASSERT(spa_has_checkpoint(spa));
|
|
range_tree_add(msp->ms_checkpointing, offset, asize);
|
|
} else {
|
|
range_tree_add(msp->ms_freeing, offset, asize);
|
|
}
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
void
|
|
metaslab_free_impl_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
|
|
uint64_t size, void *arg)
|
|
{
|
|
boolean_t *checkpoint = arg;
|
|
|
|
ASSERT3P(checkpoint, !=, NULL);
|
|
|
|
if (vd->vdev_ops->vdev_op_remap != NULL)
|
|
vdev_indirect_mark_obsolete(vd, offset, size);
|
|
else
|
|
metaslab_free_impl(vd, offset, size, *checkpoint);
|
|
}
|
|
|
|
static void
|
|
metaslab_free_impl(vdev_t *vd, uint64_t offset, uint64_t size,
|
|
boolean_t checkpoint)
|
|
{
|
|
spa_t *spa = vd->vdev_spa;
|
|
|
|
ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);
|
|
|
|
if (spa_syncing_txg(spa) > spa_freeze_txg(spa))
|
|
return;
|
|
|
|
if (spa->spa_vdev_removal != NULL &&
|
|
spa->spa_vdev_removal->svr_vdev_id == vd->vdev_id &&
|
|
vdev_is_concrete(vd)) {
|
|
/*
|
|
* Note: we check if the vdev is concrete because when
|
|
* we complete the removal, we first change the vdev to be
|
|
* an indirect vdev (in open context), and then (in syncing
|
|
* context) clear spa_vdev_removal.
|
|
*/
|
|
free_from_removing_vdev(vd, offset, size);
|
|
} else if (vd->vdev_ops->vdev_op_remap != NULL) {
|
|
vdev_indirect_mark_obsolete(vd, offset, size);
|
|
vd->vdev_ops->vdev_op_remap(vd, offset, size,
|
|
metaslab_free_impl_cb, &checkpoint);
|
|
} else {
|
|
metaslab_free_concrete(vd, offset, size, checkpoint);
|
|
}
|
|
}
|
|
|
|
typedef struct remap_blkptr_cb_arg {
|
|
blkptr_t *rbca_bp;
|
|
spa_remap_cb_t rbca_cb;
|
|
vdev_t *rbca_remap_vd;
|
|
uint64_t rbca_remap_offset;
|
|
void *rbca_cb_arg;
|
|
} remap_blkptr_cb_arg_t;
|
|
|
|
void
|
|
remap_blkptr_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
|
|
uint64_t size, void *arg)
|
|
{
|
|
remap_blkptr_cb_arg_t *rbca = arg;
|
|
blkptr_t *bp = rbca->rbca_bp;
|
|
|
|
/* We can not remap split blocks. */
|
|
if (size != DVA_GET_ASIZE(&bp->blk_dva[0]))
|
|
return;
|
|
ASSERT0(inner_offset);
|
|
|
|
if (rbca->rbca_cb != NULL) {
|
|
/*
|
|
* At this point we know that we are not handling split
|
|
* blocks and we invoke the callback on the previous
|
|
* vdev which must be indirect.
|
|
*/
|
|
ASSERT3P(rbca->rbca_remap_vd->vdev_ops, ==, &vdev_indirect_ops);
|
|
|
|
rbca->rbca_cb(rbca->rbca_remap_vd->vdev_id,
|
|
rbca->rbca_remap_offset, size, rbca->rbca_cb_arg);
|
|
|
|
/* set up remap_blkptr_cb_arg for the next call */
|
|
rbca->rbca_remap_vd = vd;
|
|
rbca->rbca_remap_offset = offset;
|
|
}
|
|
|
|
/*
|
|
* The phys birth time is that of dva[0]. This ensures that we know
|
|
* when each dva was written, so that resilver can determine which
|
|
* blocks need to be scrubbed (i.e. those written during the time
|
|
* the vdev was offline). It also ensures that the key used in
|
|
* the ARC hash table is unique (i.e. dva[0] + phys_birth). If
|
|
* we didn't change the phys_birth, a lookup in the ARC for a
|
|
* remapped BP could find the data that was previously stored at
|
|
* this vdev + offset.
|
|
*/
|
|
vdev_t *oldvd = vdev_lookup_top(vd->vdev_spa,
|
|
DVA_GET_VDEV(&bp->blk_dva[0]));
|
|
vdev_indirect_births_t *vib = oldvd->vdev_indirect_births;
|
|
bp->blk_phys_birth = vdev_indirect_births_physbirth(vib,
|
|
DVA_GET_OFFSET(&bp->blk_dva[0]), DVA_GET_ASIZE(&bp->blk_dva[0]));
|
|
|
|
DVA_SET_VDEV(&bp->blk_dva[0], vd->vdev_id);
|
|
DVA_SET_OFFSET(&bp->blk_dva[0], offset);
|
|
}
|
|
|
|
/*
|
|
* If the block pointer contains any indirect DVAs, modify them to refer to
|
|
* concrete DVAs. Note that this will sometimes not be possible, leaving
|
|
* the indirect DVA in place. This happens if the indirect DVA spans multiple
|
|
* segments in the mapping (i.e. it is a "split block").
|
|
*
|
|
* If the BP was remapped, calls the callback on the original dva (note the
|
|
* callback can be called multiple times if the original indirect DVA refers
|
|
* to another indirect DVA, etc).
|
|
*
|
|
* Returns TRUE if the BP was remapped.
|
|
*/
|
|
boolean_t
|
|
spa_remap_blkptr(spa_t *spa, blkptr_t *bp, spa_remap_cb_t callback, void *arg)
|
|
{
|
|
remap_blkptr_cb_arg_t rbca;
|
|
|
|
if (!zfs_remap_blkptr_enable)
|
|
return (B_FALSE);
|
|
|
|
if (!spa_feature_is_enabled(spa, SPA_FEATURE_OBSOLETE_COUNTS))
|
|
return (B_FALSE);
|
|
|
|
/*
|
|
* Dedup BP's can not be remapped, because ddt_phys_select() depends
|
|
* on DVA[0] being the same in the BP as in the DDT (dedup table).
|
|
*/
|
|
if (BP_GET_DEDUP(bp))
|
|
return (B_FALSE);
|
|
|
|
/*
|
|
* Gang blocks can not be remapped, because
|
|
* zio_checksum_gang_verifier() depends on the DVA[0] that's in
|
|
* the BP used to read the gang block header (GBH) being the same
|
|
* as the DVA[0] that we allocated for the GBH.
|
|
*/
|
|
if (BP_IS_GANG(bp))
|
|
return (B_FALSE);
|
|
|
|
/*
|
|
* Embedded BP's have no DVA to remap.
|
|
*/
|
|
if (BP_GET_NDVAS(bp) < 1)
|
|
return (B_FALSE);
|
|
|
|
/*
|
|
* Note: we only remap dva[0]. If we remapped other dvas, we
|
|
* would no longer know what their phys birth txg is.
|
|
*/
|
|
dva_t *dva = &bp->blk_dva[0];
|
|
|
|
uint64_t offset = DVA_GET_OFFSET(dva);
|
|
uint64_t size = DVA_GET_ASIZE(dva);
|
|
vdev_t *vd = vdev_lookup_top(spa, DVA_GET_VDEV(dva));
|
|
|
|
if (vd->vdev_ops->vdev_op_remap == NULL)
|
|
return (B_FALSE);
|
|
|
|
rbca.rbca_bp = bp;
|
|
rbca.rbca_cb = callback;
|
|
rbca.rbca_remap_vd = vd;
|
|
rbca.rbca_remap_offset = offset;
|
|
rbca.rbca_cb_arg = arg;
|
|
|
|
/*
|
|
* remap_blkptr_cb() will be called in order for each level of
|
|
* indirection, until a concrete vdev is reached or a split block is
|
|
* encountered. old_vd and old_offset are updated within the callback
|
|
* as we go from the one indirect vdev to the next one (either concrete
|
|
* or indirect again) in that order.
|
|
*/
|
|
vd->vdev_ops->vdev_op_remap(vd, offset, size, remap_blkptr_cb, &rbca);
|
|
|
|
/* Check if the DVA wasn't remapped because it is a split block */
|
|
if (DVA_GET_VDEV(&rbca.rbca_bp->blk_dva[0]) == vd->vdev_id)
|
|
return (B_FALSE);
|
|
|
|
return (B_TRUE);
|
|
}
|
|
|
|
/*
|
|
* Undo the allocation of a DVA which happened in the given transaction group.
|
|
*/
|
|
void
|
|
metaslab_unalloc_dva(spa_t *spa, const dva_t *dva, uint64_t txg)
|
|
{
|
|
metaslab_t *msp;
|
|
vdev_t *vd;
|
|
uint64_t vdev = DVA_GET_VDEV(dva);
|
|
uint64_t offset = DVA_GET_OFFSET(dva);
|
|
uint64_t size = DVA_GET_ASIZE(dva);
|
|
|
|
ASSERT(DVA_IS_VALID(dva));
|
|
ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);
|
|
|
|
if (txg > spa_freeze_txg(spa))
|
|
return;
|
|
|
|
if ((vd = vdev_lookup_top(spa, vdev)) == NULL || !DVA_IS_VALID(dva) ||
|
|
(offset >> vd->vdev_ms_shift) >= vd->vdev_ms_count) {
|
|
zfs_panic_recover("metaslab_free_dva(): bad DVA %llu:%llu:%llu",
|
|
(u_longlong_t)vdev, (u_longlong_t)offset,
|
|
(u_longlong_t)size);
|
|
return;
|
|
}
|
|
|
|
ASSERT(!vd->vdev_removing);
|
|
ASSERT(vdev_is_concrete(vd));
|
|
ASSERT0(vd->vdev_indirect_config.vic_mapping_object);
|
|
ASSERT3P(vd->vdev_indirect_mapping, ==, NULL);
|
|
|
|
if (DVA_GET_GANG(dva))
|
|
size = vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE);
|
|
|
|
msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
range_tree_remove(msp->ms_allocating[txg & TXG_MASK],
|
|
offset, size);
|
|
|
|
VERIFY(!msp->ms_condensing);
|
|
VERIFY3U(offset, >=, msp->ms_start);
|
|
VERIFY3U(offset + size, <=, msp->ms_start + msp->ms_size);
|
|
VERIFY3U(range_tree_space(msp->ms_allocatable) + size, <=,
|
|
msp->ms_size);
|
|
VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
|
|
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
|
|
range_tree_add(msp->ms_allocatable, offset, size);
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
|
|
/*
|
|
* Free the block represented by the given DVA.
|
|
*/
|
|
void
|
|
metaslab_free_dva(spa_t *spa, const dva_t *dva, boolean_t checkpoint)
|
|
{
|
|
uint64_t vdev = DVA_GET_VDEV(dva);
|
|
uint64_t offset = DVA_GET_OFFSET(dva);
|
|
uint64_t size = DVA_GET_ASIZE(dva);
|
|
vdev_t *vd = vdev_lookup_top(spa, vdev);
|
|
|
|
ASSERT(DVA_IS_VALID(dva));
|
|
ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);
|
|
|
|
if (DVA_GET_GANG(dva)) {
|
|
size = vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE);
|
|
}
|
|
|
|
metaslab_free_impl(vd, offset, size, checkpoint);
|
|
}
|
|
|
|
/*
|
|
* Reserve some allocation slots. The reservation system must be called
|
|
* before we call into the allocator. If there aren't any available slots
|
|
* then the I/O will be throttled until an I/O completes and its slots are
|
|
* freed up. The function returns true if it was successful in placing
|
|
* the reservation.
|
|
*/
|
|
boolean_t
|
|
metaslab_class_throttle_reserve(metaslab_class_t *mc, int slots, int allocator,
|
|
zio_t *zio, int flags)
|
|
{
|
|
uint64_t available_slots = 0;
|
|
boolean_t slot_reserved = B_FALSE;
|
|
uint64_t max = mc->mc_alloc_max_slots[allocator];
|
|
|
|
ASSERT(mc->mc_alloc_throttle_enabled);
|
|
mutex_enter(&mc->mc_lock);
|
|
|
|
uint64_t reserved_slots =
|
|
zfs_refcount_count(&mc->mc_alloc_slots[allocator]);
|
|
if (reserved_slots < max)
|
|
available_slots = max - reserved_slots;
|
|
|
|
if (slots <= available_slots || GANG_ALLOCATION(flags) ||
|
|
flags & METASLAB_MUST_RESERVE) {
|
|
/*
|
|
* We reserve the slots individually so that we can unreserve
|
|
* them individually when an I/O completes.
|
|
*/
|
|
for (int d = 0; d < slots; d++) {
|
|
reserved_slots =
|
|
zfs_refcount_add(&mc->mc_alloc_slots[allocator],
|
|
zio);
|
|
}
|
|
zio->io_flags |= ZIO_FLAG_IO_ALLOCATING;
|
|
slot_reserved = B_TRUE;
|
|
}
|
|
|
|
mutex_exit(&mc->mc_lock);
|
|
return (slot_reserved);
|
|
}
|
|
|
|
void
|
|
metaslab_class_throttle_unreserve(metaslab_class_t *mc, int slots,
|
|
int allocator, zio_t *zio)
|
|
{
|
|
ASSERT(mc->mc_alloc_throttle_enabled);
|
|
mutex_enter(&mc->mc_lock);
|
|
for (int d = 0; d < slots; d++) {
|
|
(void) zfs_refcount_remove(&mc->mc_alloc_slots[allocator],
|
|
zio);
|
|
}
|
|
mutex_exit(&mc->mc_lock);
|
|
}
|
|
|
|
static int
|
|
metaslab_claim_concrete(vdev_t *vd, uint64_t offset, uint64_t size,
|
|
uint64_t txg)
|
|
{
|
|
metaslab_t *msp;
|
|
spa_t *spa = vd->vdev_spa;
|
|
int error = 0;
|
|
|
|
if (offset >> vd->vdev_ms_shift >= vd->vdev_ms_count)
|
|
return (SET_ERROR(ENXIO));
|
|
|
|
ASSERT3P(vd->vdev_ms, !=, NULL);
|
|
msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
|
|
if ((txg != 0 && spa_writeable(spa)) || !msp->ms_loaded) {
|
|
error = metaslab_activate(msp, 0, METASLAB_WEIGHT_CLAIM);
|
|
if (error == EBUSY) {
|
|
ASSERT(msp->ms_loaded);
|
|
ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);
|
|
error = 0;
|
|
}
|
|
}
|
|
|
|
if (error == 0 &&
|
|
!range_tree_contains(msp->ms_allocatable, offset, size))
|
|
error = SET_ERROR(ENOENT);
|
|
|
|
if (error || txg == 0) { /* txg == 0 indicates dry run */
|
|
mutex_exit(&msp->ms_lock);
|
|
return (error);
|
|
}
|
|
|
|
VERIFY(!msp->ms_condensing);
|
|
VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
|
|
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
|
|
VERIFY3U(range_tree_space(msp->ms_allocatable) - size, <=,
|
|
msp->ms_size);
|
|
range_tree_remove(msp->ms_allocatable, offset, size);
|
|
|
|
if (spa_writeable(spa)) { /* don't dirty if we're zdb(1M) */
|
|
if (range_tree_is_empty(msp->ms_allocating[txg & TXG_MASK]))
|
|
vdev_dirty(vd, VDD_METASLAB, msp, txg);
|
|
range_tree_add(msp->ms_allocating[txg & TXG_MASK],
|
|
offset, size);
|
|
}
|
|
|
|
mutex_exit(&msp->ms_lock);
|
|
|
|
return (0);
|
|
}
|
|
|
|
typedef struct metaslab_claim_cb_arg_t {
|
|
uint64_t mcca_txg;
|
|
int mcca_error;
|
|
} metaslab_claim_cb_arg_t;
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
metaslab_claim_impl_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
|
|
uint64_t size, void *arg)
|
|
{
|
|
metaslab_claim_cb_arg_t *mcca_arg = arg;
|
|
|
|
if (mcca_arg->mcca_error == 0) {
|
|
mcca_arg->mcca_error = metaslab_claim_concrete(vd, offset,
|
|
size, mcca_arg->mcca_txg);
|
|
}
|
|
}
|
|
|
|
int
|
|
metaslab_claim_impl(vdev_t *vd, uint64_t offset, uint64_t size, uint64_t txg)
|
|
{
|
|
if (vd->vdev_ops->vdev_op_remap != NULL) {
|
|
metaslab_claim_cb_arg_t arg;
|
|
|
|
/*
|
|
* Only zdb(1M) can claim on indirect vdevs. This is used
|
|
* to detect leaks of mapped space (that are not accounted
|
|
* for in the obsolete counts, spacemap, or bpobj).
|
|
*/
|
|
ASSERT(!spa_writeable(vd->vdev_spa));
|
|
arg.mcca_error = 0;
|
|
arg.mcca_txg = txg;
|
|
|
|
vd->vdev_ops->vdev_op_remap(vd, offset, size,
|
|
metaslab_claim_impl_cb, &arg);
|
|
|
|
if (arg.mcca_error == 0) {
|
|
arg.mcca_error = metaslab_claim_concrete(vd,
|
|
offset, size, txg);
|
|
}
|
|
return (arg.mcca_error);
|
|
} else {
|
|
return (metaslab_claim_concrete(vd, offset, size, txg));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Intent log support: upon opening the pool after a crash, notify the SPA
|
|
* of blocks that the intent log has allocated for immediate write, but
|
|
* which are still considered free by the SPA because the last transaction
|
|
* group didn't commit yet.
|
|
*/
|
|
static int
|
|
metaslab_claim_dva(spa_t *spa, const dva_t *dva, uint64_t txg)
|
|
{
|
|
uint64_t vdev = DVA_GET_VDEV(dva);
|
|
uint64_t offset = DVA_GET_OFFSET(dva);
|
|
uint64_t size = DVA_GET_ASIZE(dva);
|
|
vdev_t *vd;
|
|
|
|
if ((vd = vdev_lookup_top(spa, vdev)) == NULL) {
|
|
return (SET_ERROR(ENXIO));
|
|
}
|
|
|
|
ASSERT(DVA_IS_VALID(dva));
|
|
|
|
if (DVA_GET_GANG(dva))
|
|
size = vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE);
|
|
|
|
return (metaslab_claim_impl(vd, offset, size, txg));
|
|
}
|
|
|
|
int
|
|
metaslab_alloc(spa_t *spa, metaslab_class_t *mc, uint64_t psize, blkptr_t *bp,
|
|
int ndvas, uint64_t txg, blkptr_t *hintbp, int flags,
|
|
zio_alloc_list_t *zal, zio_t *zio, int allocator)
|
|
{
|
|
dva_t *dva = bp->blk_dva;
|
|
dva_t *hintdva = hintbp->blk_dva;
|
|
int error = 0;
|
|
|
|
ASSERT(bp->blk_birth == 0);
|
|
ASSERT(BP_PHYSICAL_BIRTH(bp) == 0);
|
|
|
|
spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);
|
|
|
|
if (mc->mc_rotor == NULL) { /* no vdevs in this class */
|
|
spa_config_exit(spa, SCL_ALLOC, FTAG);
|
|
return (SET_ERROR(ENOSPC));
|
|
}
|
|
|
|
ASSERT(ndvas > 0 && ndvas <= spa_max_replication(spa));
|
|
ASSERT(BP_GET_NDVAS(bp) == 0);
|
|
ASSERT(hintbp == NULL || ndvas <= BP_GET_NDVAS(hintbp));
|
|
ASSERT3P(zal, !=, NULL);
|
|
|
|
for (int d = 0; d < ndvas; d++) {
|
|
error = metaslab_alloc_dva(spa, mc, psize, dva, d, hintdva,
|
|
txg, flags, zal, allocator);
|
|
if (error != 0) {
|
|
for (d--; d >= 0; d--) {
|
|
metaslab_unalloc_dva(spa, &dva[d], txg);
|
|
metaslab_group_alloc_decrement(spa,
|
|
DVA_GET_VDEV(&dva[d]), zio, flags,
|
|
allocator, B_FALSE);
|
|
bzero(&dva[d], sizeof (dva_t));
|
|
}
|
|
spa_config_exit(spa, SCL_ALLOC, FTAG);
|
|
return (error);
|
|
} else {
|
|
/*
|
|
* Update the metaslab group's queue depth
|
|
* based on the newly allocated dva.
|
|
*/
|
|
metaslab_group_alloc_increment(spa,
|
|
DVA_GET_VDEV(&dva[d]), zio, flags, allocator);
|
|
}
|
|
|
|
}
|
|
ASSERT(error == 0);
|
|
ASSERT(BP_GET_NDVAS(bp) == ndvas);
|
|
|
|
spa_config_exit(spa, SCL_ALLOC, FTAG);
|
|
|
|
BP_SET_BIRTH(bp, txg, 0);
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
metaslab_free(spa_t *spa, const blkptr_t *bp, uint64_t txg, boolean_t now)
|
|
{
|
|
const dva_t *dva = bp->blk_dva;
|
|
int ndvas = BP_GET_NDVAS(bp);
|
|
|
|
ASSERT(!BP_IS_HOLE(bp));
|
|
ASSERT(!now || bp->blk_birth >= spa_syncing_txg(spa));
|
|
|
|
/*
|
|
* If we have a checkpoint for the pool we need to make sure that
|
|
* the blocks that we free that are part of the checkpoint won't be
|
|
* reused until the checkpoint is discarded or we revert to it.
|
|
*
|
|
* The checkpoint flag is passed down the metaslab_free code path
|
|
* and is set whenever we want to add a block to the checkpoint's
|
|
* accounting. That is, we "checkpoint" blocks that existed at the
|
|
* time the checkpoint was created and are therefore referenced by
|
|
* the checkpointed uberblock.
|
|
*
|
|
* Note that, we don't checkpoint any blocks if the current
|
|
* syncing txg <= spa_checkpoint_txg. We want these frees to sync
|
|
* normally as they will be referenced by the checkpointed uberblock.
|
|
*/
|
|
boolean_t checkpoint = B_FALSE;
|
|
if (bp->blk_birth <= spa->spa_checkpoint_txg &&
|
|
spa_syncing_txg(spa) > spa->spa_checkpoint_txg) {
|
|
/*
|
|
* At this point, if the block is part of the checkpoint
|
|
* there is no way it was created in the current txg.
|
|
*/
|
|
ASSERT(!now);
|
|
ASSERT3U(spa_syncing_txg(spa), ==, txg);
|
|
checkpoint = B_TRUE;
|
|
}
|
|
|
|
spa_config_enter(spa, SCL_FREE, FTAG, RW_READER);
|
|
|
|
for (int d = 0; d < ndvas; d++) {
|
|
if (now) {
|
|
metaslab_unalloc_dva(spa, &dva[d], txg);
|
|
} else {
|
|
ASSERT3U(txg, ==, spa_syncing_txg(spa));
|
|
metaslab_free_dva(spa, &dva[d], checkpoint);
|
|
}
|
|
}
|
|
|
|
spa_config_exit(spa, SCL_FREE, FTAG);
|
|
}
|
|
|
|
int
|
|
metaslab_claim(spa_t *spa, const blkptr_t *bp, uint64_t txg)
|
|
{
|
|
const dva_t *dva = bp->blk_dva;
|
|
int ndvas = BP_GET_NDVAS(bp);
|
|
int error = 0;
|
|
|
|
ASSERT(!BP_IS_HOLE(bp));
|
|
|
|
if (txg != 0) {
|
|
/*
|
|
* First do a dry run to make sure all DVAs are claimable,
|
|
* so we don't have to unwind from partial failures below.
|
|
*/
|
|
if ((error = metaslab_claim(spa, bp, 0)) != 0)
|
|
return (error);
|
|
}
|
|
|
|
spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);
|
|
|
|
for (int d = 0; d < ndvas; d++) {
|
|
error = metaslab_claim_dva(spa, &dva[d], txg);
|
|
if (error != 0)
|
|
break;
|
|
}
|
|
|
|
spa_config_exit(spa, SCL_ALLOC, FTAG);
|
|
|
|
ASSERT(error == 0 || txg == 0);
|
|
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
metaslab_fastwrite_mark(spa_t *spa, const blkptr_t *bp)
|
|
{
|
|
const dva_t *dva = bp->blk_dva;
|
|
int ndvas = BP_GET_NDVAS(bp);
|
|
uint64_t psize = BP_GET_PSIZE(bp);
|
|
int d;
|
|
vdev_t *vd;
|
|
|
|
ASSERT(!BP_IS_HOLE(bp));
|
|
ASSERT(!BP_IS_EMBEDDED(bp));
|
|
ASSERT(psize > 0);
|
|
|
|
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
|
|
|
|
for (d = 0; d < ndvas; d++) {
|
|
if ((vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d]))) == NULL)
|
|
continue;
|
|
atomic_add_64(&vd->vdev_pending_fastwrite, psize);
|
|
}
|
|
|
|
spa_config_exit(spa, SCL_VDEV, FTAG);
|
|
}
|
|
|
|
void
|
|
metaslab_fastwrite_unmark(spa_t *spa, const blkptr_t *bp)
|
|
{
|
|
const dva_t *dva = bp->blk_dva;
|
|
int ndvas = BP_GET_NDVAS(bp);
|
|
uint64_t psize = BP_GET_PSIZE(bp);
|
|
int d;
|
|
vdev_t *vd;
|
|
|
|
ASSERT(!BP_IS_HOLE(bp));
|
|
ASSERT(!BP_IS_EMBEDDED(bp));
|
|
ASSERT(psize > 0);
|
|
|
|
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
|
|
|
|
for (d = 0; d < ndvas; d++) {
|
|
if ((vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d]))) == NULL)
|
|
continue;
|
|
ASSERT3U(vd->vdev_pending_fastwrite, >=, psize);
|
|
atomic_sub_64(&vd->vdev_pending_fastwrite, psize);
|
|
}
|
|
|
|
spa_config_exit(spa, SCL_VDEV, FTAG);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
metaslab_check_free_impl_cb(uint64_t inner, vdev_t *vd, uint64_t offset,
|
|
uint64_t size, void *arg)
|
|
{
|
|
if (vd->vdev_ops == &vdev_indirect_ops)
|
|
return;
|
|
|
|
metaslab_check_free_impl(vd, offset, size);
|
|
}
|
|
|
|
static void
|
|
metaslab_check_free_impl(vdev_t *vd, uint64_t offset, uint64_t size)
|
|
{
|
|
metaslab_t *msp;
|
|
ASSERTV(spa_t *spa = vd->vdev_spa);
|
|
|
|
if ((zfs_flags & ZFS_DEBUG_ZIO_FREE) == 0)
|
|
return;
|
|
|
|
if (vd->vdev_ops->vdev_op_remap != NULL) {
|
|
vd->vdev_ops->vdev_op_remap(vd, offset, size,
|
|
metaslab_check_free_impl_cb, NULL);
|
|
return;
|
|
}
|
|
|
|
ASSERT(vdev_is_concrete(vd));
|
|
ASSERT3U(offset >> vd->vdev_ms_shift, <, vd->vdev_ms_count);
|
|
ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);
|
|
|
|
msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
|
|
|
|
mutex_enter(&msp->ms_lock);
|
|
if (msp->ms_loaded)
|
|
range_tree_verify(msp->ms_allocatable, offset, size);
|
|
|
|
range_tree_verify(msp->ms_freeing, offset, size);
|
|
range_tree_verify(msp->ms_checkpointing, offset, size);
|
|
range_tree_verify(msp->ms_freed, offset, size);
|
|
for (int j = 0; j < TXG_DEFER_SIZE; j++)
|
|
range_tree_verify(msp->ms_defer[j], offset, size);
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
|
|
void
|
|
metaslab_check_free(spa_t *spa, const blkptr_t *bp)
|
|
{
|
|
if ((zfs_flags & ZFS_DEBUG_ZIO_FREE) == 0)
|
|
return;
|
|
|
|
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
|
|
for (int i = 0; i < BP_GET_NDVAS(bp); i++) {
|
|
uint64_t vdev = DVA_GET_VDEV(&bp->blk_dva[i]);
|
|
vdev_t *vd = vdev_lookup_top(spa, vdev);
|
|
uint64_t offset = DVA_GET_OFFSET(&bp->blk_dva[i]);
|
|
uint64_t size = DVA_GET_ASIZE(&bp->blk_dva[i]);
|
|
|
|
if (DVA_GET_GANG(&bp->blk_dva[i]))
|
|
size = vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE);
|
|
|
|
ASSERT3P(vd, !=, NULL);
|
|
|
|
metaslab_check_free_impl(vd, offset, size);
|
|
}
|
|
spa_config_exit(spa, SCL_VDEV, FTAG);
|
|
}
|
|
|
|
#if defined(_KERNEL)
|
|
/* BEGIN CSTYLED */
|
|
module_param(metaslab_aliquot, ulong, 0644);
|
|
MODULE_PARM_DESC(metaslab_aliquot,
|
|
"allocation granularity (a.k.a. stripe size)");
|
|
|
|
module_param(metaslab_debug_load, int, 0644);
|
|
MODULE_PARM_DESC(metaslab_debug_load,
|
|
"load all metaslabs when pool is first opened");
|
|
|
|
module_param(metaslab_debug_unload, int, 0644);
|
|
MODULE_PARM_DESC(metaslab_debug_unload,
|
|
"prevent metaslabs from being unloaded");
|
|
|
|
module_param(metaslab_preload_enabled, int, 0644);
|
|
MODULE_PARM_DESC(metaslab_preload_enabled,
|
|
"preload potential metaslabs during reassessment");
|
|
|
|
module_param(zfs_mg_noalloc_threshold, int, 0644);
|
|
MODULE_PARM_DESC(zfs_mg_noalloc_threshold,
|
|
"percentage of free space for metaslab group to allow allocation");
|
|
|
|
module_param(zfs_mg_fragmentation_threshold, int, 0644);
|
|
MODULE_PARM_DESC(zfs_mg_fragmentation_threshold,
|
|
"fragmentation for metaslab group to allow allocation");
|
|
|
|
module_param(zfs_metaslab_fragmentation_threshold, int, 0644);
|
|
MODULE_PARM_DESC(zfs_metaslab_fragmentation_threshold,
|
|
"fragmentation for metaslab to allow allocation");
|
|
|
|
module_param(metaslab_fragmentation_factor_enabled, int, 0644);
|
|
MODULE_PARM_DESC(metaslab_fragmentation_factor_enabled,
|
|
"use the fragmentation metric to prefer less fragmented metaslabs");
|
|
|
|
module_param(metaslab_lba_weighting_enabled, int, 0644);
|
|
MODULE_PARM_DESC(metaslab_lba_weighting_enabled,
|
|
"prefer metaslabs with lower LBAs");
|
|
|
|
module_param(metaslab_bias_enabled, int, 0644);
|
|
MODULE_PARM_DESC(metaslab_bias_enabled,
|
|
"enable metaslab group biasing");
|
|
|
|
module_param(zfs_metaslab_segment_weight_enabled, int, 0644);
|
|
MODULE_PARM_DESC(zfs_metaslab_segment_weight_enabled,
|
|
"enable segment-based metaslab selection");
|
|
|
|
module_param(zfs_metaslab_switch_threshold, int, 0644);
|
|
MODULE_PARM_DESC(zfs_metaslab_switch_threshold,
|
|
"segment-based metaslab selection maximum buckets before switching");
|
|
|
|
module_param(metaslab_force_ganging, ulong, 0644);
|
|
MODULE_PARM_DESC(metaslab_force_ganging,
|
|
"blocks larger than this size are forced to be gang blocks");
|
|
/* END CSTYLED */
|
|
|
|
#endif
|