mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-30 21:09:38 +03:00
80a91e7469
Currently, if a resilver is triggered for any reason while an existing one is running, zfs will immediately restart the existing resilver from the beginning to include the new drive. This causes problems for system administrators when a drive fails while another is already resilvering. In this case, the optimal thing to do to reduce risk of data loss is to wait for the current resilver to end before immediately replacing the second failed drive, which allows the system to operate with two incomplete drives for the minimum amount of time. This patch introduces the resilver_defer feature that essentially does this for the admin without forcing them to wait and monitor the resilver manually. The change requires an on-disk feature since we must mark drives that are part of a deferred resilver in the vdev config to ensure that we do not assume they are done resilvering when an existing resilver completes. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: @mmaybee Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #7732
1381 lines
44 KiB
C
1381 lines
44 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2011, 2018 by Delphix. All rights reserved.
|
|
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
|
|
* Copyright (c) 2013, 2017 Joyent, Inc. All rights reserved.
|
|
* Copyright (c) 2014 Integros [integros.com]
|
|
* Copyright (c) 2017 Datto Inc.
|
|
* Copyright (c) 2017, Intel Corporation.
|
|
*/
|
|
|
|
/* Portions Copyright 2010 Robert Milkowski */
|
|
|
|
#ifndef _SYS_FS_ZFS_H
|
|
#define _SYS_FS_ZFS_H
|
|
|
|
#include <sys/time.h>
|
|
#include <sys/zio_priority.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*
|
|
* Types and constants shared between userland and the kernel.
|
|
*/
|
|
|
|
/*
|
|
* Each dataset can be one of the following types. These constants can be
|
|
* combined into masks that can be passed to various functions.
|
|
*/
|
|
typedef enum {
|
|
ZFS_TYPE_FILESYSTEM = (1 << 0),
|
|
ZFS_TYPE_SNAPSHOT = (1 << 1),
|
|
ZFS_TYPE_VOLUME = (1 << 2),
|
|
ZFS_TYPE_POOL = (1 << 3),
|
|
ZFS_TYPE_BOOKMARK = (1 << 4)
|
|
} zfs_type_t;
|
|
|
|
/*
|
|
* NB: lzc_dataset_type should be updated whenever a new objset type is added,
|
|
* if it represents a real type of a dataset that can be created from userland.
|
|
*/
|
|
typedef enum dmu_objset_type {
|
|
DMU_OST_NONE,
|
|
DMU_OST_META,
|
|
DMU_OST_ZFS,
|
|
DMU_OST_ZVOL,
|
|
DMU_OST_OTHER, /* For testing only! */
|
|
DMU_OST_ANY, /* Be careful! */
|
|
DMU_OST_NUMTYPES
|
|
} dmu_objset_type_t;
|
|
|
|
#define ZFS_TYPE_DATASET \
|
|
(ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME | ZFS_TYPE_SNAPSHOT)
|
|
|
|
/*
|
|
* All of these include the terminating NUL byte.
|
|
*/
|
|
#define ZAP_MAXNAMELEN 256
|
|
#define ZAP_MAXVALUELEN (1024 * 8)
|
|
#define ZAP_OLDMAXVALUELEN 1024
|
|
#define ZFS_MAX_DATASET_NAME_LEN 256
|
|
|
|
/*
|
|
* Dataset properties are identified by these constants and must be added to
|
|
* the end of this list to ensure that external consumers are not affected
|
|
* by the change. If you make any changes to this list, be sure to update
|
|
* the property table in module/zcommon/zfs_prop.c.
|
|
*/
|
|
typedef enum {
|
|
ZPROP_CONT = -2,
|
|
ZPROP_INVAL = -1,
|
|
ZFS_PROP_TYPE = 0,
|
|
ZFS_PROP_CREATION,
|
|
ZFS_PROP_USED,
|
|
ZFS_PROP_AVAILABLE,
|
|
ZFS_PROP_REFERENCED,
|
|
ZFS_PROP_COMPRESSRATIO,
|
|
ZFS_PROP_MOUNTED,
|
|
ZFS_PROP_ORIGIN,
|
|
ZFS_PROP_QUOTA,
|
|
ZFS_PROP_RESERVATION,
|
|
ZFS_PROP_VOLSIZE,
|
|
ZFS_PROP_VOLBLOCKSIZE,
|
|
ZFS_PROP_RECORDSIZE,
|
|
ZFS_PROP_MOUNTPOINT,
|
|
ZFS_PROP_SHARENFS,
|
|
ZFS_PROP_CHECKSUM,
|
|
ZFS_PROP_COMPRESSION,
|
|
ZFS_PROP_ATIME,
|
|
ZFS_PROP_DEVICES,
|
|
ZFS_PROP_EXEC,
|
|
ZFS_PROP_SETUID,
|
|
ZFS_PROP_READONLY,
|
|
ZFS_PROP_ZONED,
|
|
ZFS_PROP_SNAPDIR,
|
|
ZFS_PROP_PRIVATE, /* not exposed to user, temporary */
|
|
ZFS_PROP_ACLINHERIT,
|
|
ZFS_PROP_CREATETXG,
|
|
ZFS_PROP_NAME, /* not exposed to the user */
|
|
ZFS_PROP_CANMOUNT,
|
|
ZFS_PROP_ISCSIOPTIONS, /* not exposed to the user */
|
|
ZFS_PROP_XATTR,
|
|
ZFS_PROP_NUMCLONES, /* not exposed to the user */
|
|
ZFS_PROP_COPIES,
|
|
ZFS_PROP_VERSION,
|
|
ZFS_PROP_UTF8ONLY,
|
|
ZFS_PROP_NORMALIZE,
|
|
ZFS_PROP_CASE,
|
|
ZFS_PROP_VSCAN,
|
|
ZFS_PROP_NBMAND,
|
|
ZFS_PROP_SHARESMB,
|
|
ZFS_PROP_REFQUOTA,
|
|
ZFS_PROP_REFRESERVATION,
|
|
ZFS_PROP_GUID,
|
|
ZFS_PROP_PRIMARYCACHE,
|
|
ZFS_PROP_SECONDARYCACHE,
|
|
ZFS_PROP_USEDSNAP,
|
|
ZFS_PROP_USEDDS,
|
|
ZFS_PROP_USEDCHILD,
|
|
ZFS_PROP_USEDREFRESERV,
|
|
ZFS_PROP_USERACCOUNTING, /* not exposed to the user */
|
|
ZFS_PROP_STMF_SHAREINFO, /* not exposed to the user */
|
|
ZFS_PROP_DEFER_DESTROY,
|
|
ZFS_PROP_USERREFS,
|
|
ZFS_PROP_LOGBIAS,
|
|
ZFS_PROP_UNIQUE, /* not exposed to the user */
|
|
ZFS_PROP_OBJSETID,
|
|
ZFS_PROP_DEDUP,
|
|
ZFS_PROP_MLSLABEL,
|
|
ZFS_PROP_SYNC,
|
|
ZFS_PROP_DNODESIZE,
|
|
ZFS_PROP_REFRATIO,
|
|
ZFS_PROP_WRITTEN,
|
|
ZFS_PROP_CLONES,
|
|
ZFS_PROP_LOGICALUSED,
|
|
ZFS_PROP_LOGICALREFERENCED,
|
|
ZFS_PROP_INCONSISTENT, /* not exposed to the user */
|
|
ZFS_PROP_VOLMODE,
|
|
ZFS_PROP_FILESYSTEM_LIMIT,
|
|
ZFS_PROP_SNAPSHOT_LIMIT,
|
|
ZFS_PROP_FILESYSTEM_COUNT,
|
|
ZFS_PROP_SNAPSHOT_COUNT,
|
|
ZFS_PROP_SNAPDEV,
|
|
ZFS_PROP_ACLTYPE,
|
|
ZFS_PROP_SELINUX_CONTEXT,
|
|
ZFS_PROP_SELINUX_FSCONTEXT,
|
|
ZFS_PROP_SELINUX_DEFCONTEXT,
|
|
ZFS_PROP_SELINUX_ROOTCONTEXT,
|
|
ZFS_PROP_RELATIME,
|
|
ZFS_PROP_REDUNDANT_METADATA,
|
|
ZFS_PROP_OVERLAY,
|
|
ZFS_PROP_PREV_SNAP,
|
|
ZFS_PROP_RECEIVE_RESUME_TOKEN,
|
|
ZFS_PROP_ENCRYPTION,
|
|
ZFS_PROP_KEYLOCATION,
|
|
ZFS_PROP_KEYFORMAT,
|
|
ZFS_PROP_PBKDF2_SALT,
|
|
ZFS_PROP_PBKDF2_ITERS,
|
|
ZFS_PROP_ENCRYPTION_ROOT,
|
|
ZFS_PROP_KEY_GUID,
|
|
ZFS_PROP_KEYSTATUS,
|
|
ZFS_PROP_REMAPTXG, /* not exposed to the user */
|
|
ZFS_PROP_SPECIAL_SMALL_BLOCKS,
|
|
ZFS_NUM_PROPS
|
|
} zfs_prop_t;
|
|
|
|
typedef enum {
|
|
ZFS_PROP_USERUSED,
|
|
ZFS_PROP_USERQUOTA,
|
|
ZFS_PROP_GROUPUSED,
|
|
ZFS_PROP_GROUPQUOTA,
|
|
ZFS_PROP_USEROBJUSED,
|
|
ZFS_PROP_USEROBJQUOTA,
|
|
ZFS_PROP_GROUPOBJUSED,
|
|
ZFS_PROP_GROUPOBJQUOTA,
|
|
ZFS_PROP_PROJECTUSED,
|
|
ZFS_PROP_PROJECTQUOTA,
|
|
ZFS_PROP_PROJECTOBJUSED,
|
|
ZFS_PROP_PROJECTOBJQUOTA,
|
|
ZFS_NUM_USERQUOTA_PROPS
|
|
} zfs_userquota_prop_t;
|
|
|
|
extern const char *zfs_userquota_prop_prefixes[ZFS_NUM_USERQUOTA_PROPS];
|
|
|
|
/*
|
|
* Pool properties are identified by these constants and must be added to the
|
|
* end of this list to ensure that external consumers are not affected
|
|
* by the change. If you make any changes to this list, be sure to update
|
|
* the property table in module/zcommon/zpool_prop.c.
|
|
*/
|
|
typedef enum {
|
|
ZPOOL_PROP_INVAL = -1,
|
|
ZPOOL_PROP_NAME,
|
|
ZPOOL_PROP_SIZE,
|
|
ZPOOL_PROP_CAPACITY,
|
|
ZPOOL_PROP_ALTROOT,
|
|
ZPOOL_PROP_HEALTH,
|
|
ZPOOL_PROP_GUID,
|
|
ZPOOL_PROP_VERSION,
|
|
ZPOOL_PROP_BOOTFS,
|
|
ZPOOL_PROP_DELEGATION,
|
|
ZPOOL_PROP_AUTOREPLACE,
|
|
ZPOOL_PROP_CACHEFILE,
|
|
ZPOOL_PROP_FAILUREMODE,
|
|
ZPOOL_PROP_LISTSNAPS,
|
|
ZPOOL_PROP_AUTOEXPAND,
|
|
ZPOOL_PROP_DEDUPDITTO,
|
|
ZPOOL_PROP_DEDUPRATIO,
|
|
ZPOOL_PROP_FREE,
|
|
ZPOOL_PROP_ALLOCATED,
|
|
ZPOOL_PROP_READONLY,
|
|
ZPOOL_PROP_ASHIFT,
|
|
ZPOOL_PROP_COMMENT,
|
|
ZPOOL_PROP_EXPANDSZ,
|
|
ZPOOL_PROP_FREEING,
|
|
ZPOOL_PROP_FRAGMENTATION,
|
|
ZPOOL_PROP_LEAKED,
|
|
ZPOOL_PROP_MAXBLOCKSIZE,
|
|
ZPOOL_PROP_TNAME,
|
|
ZPOOL_PROP_MAXDNODESIZE,
|
|
ZPOOL_PROP_MULTIHOST,
|
|
ZPOOL_PROP_CHECKPOINT,
|
|
ZPOOL_PROP_LOAD_GUID,
|
|
ZPOOL_NUM_PROPS
|
|
} zpool_prop_t;
|
|
|
|
/* Small enough to not hog a whole line of printout in zpool(1M). */
|
|
#define ZPROP_MAX_COMMENT 32
|
|
|
|
#define ZPROP_VALUE "value"
|
|
#define ZPROP_SOURCE "source"
|
|
|
|
typedef enum {
|
|
ZPROP_SRC_NONE = 0x1,
|
|
ZPROP_SRC_DEFAULT = 0x2,
|
|
ZPROP_SRC_TEMPORARY = 0x4,
|
|
ZPROP_SRC_LOCAL = 0x8,
|
|
ZPROP_SRC_INHERITED = 0x10,
|
|
ZPROP_SRC_RECEIVED = 0x20
|
|
} zprop_source_t;
|
|
|
|
#define ZPROP_SRC_ALL 0x3f
|
|
|
|
#define ZPROP_SOURCE_VAL_RECVD "$recvd"
|
|
#define ZPROP_N_MORE_ERRORS "N_MORE_ERRORS"
|
|
|
|
/*
|
|
* Dataset flag implemented as a special entry in the props zap object
|
|
* indicating that the dataset has received properties on or after
|
|
* SPA_VERSION_RECVD_PROPS. The first such receive blows away local properties
|
|
* just as it did in earlier versions, and thereafter, local properties are
|
|
* preserved.
|
|
*/
|
|
#define ZPROP_HAS_RECVD "$hasrecvd"
|
|
|
|
typedef enum {
|
|
ZPROP_ERR_NOCLEAR = 0x1, /* failure to clear existing props */
|
|
ZPROP_ERR_NORESTORE = 0x2 /* failure to restore props on error */
|
|
} zprop_errflags_t;
|
|
|
|
typedef int (*zprop_func)(int, void *);
|
|
|
|
/*
|
|
* Properties to be set on the root file system of a new pool
|
|
* are stuffed into their own nvlist, which is then included in
|
|
* the properties nvlist with the pool properties.
|
|
*/
|
|
#define ZPOOL_ROOTFS_PROPS "root-props-nvl"
|
|
|
|
/*
|
|
* Length of 'written@' and 'written#'
|
|
*/
|
|
#define ZFS_WRITTEN_PROP_PREFIX_LEN 8
|
|
|
|
/*
|
|
* Dataset property functions shared between libzfs and kernel.
|
|
*/
|
|
const char *zfs_prop_default_string(zfs_prop_t);
|
|
uint64_t zfs_prop_default_numeric(zfs_prop_t);
|
|
boolean_t zfs_prop_readonly(zfs_prop_t);
|
|
boolean_t zfs_prop_visible(zfs_prop_t prop);
|
|
boolean_t zfs_prop_inheritable(zfs_prop_t);
|
|
boolean_t zfs_prop_setonce(zfs_prop_t);
|
|
boolean_t zfs_prop_encryption_key_param(zfs_prop_t);
|
|
boolean_t zfs_prop_valid_keylocation(const char *, boolean_t);
|
|
const char *zfs_prop_to_name(zfs_prop_t);
|
|
zfs_prop_t zfs_name_to_prop(const char *);
|
|
boolean_t zfs_prop_user(const char *);
|
|
boolean_t zfs_prop_userquota(const char *);
|
|
boolean_t zfs_prop_written(const char *);
|
|
int zfs_prop_index_to_string(zfs_prop_t, uint64_t, const char **);
|
|
int zfs_prop_string_to_index(zfs_prop_t, const char *, uint64_t *);
|
|
uint64_t zfs_prop_random_value(zfs_prop_t, uint64_t seed);
|
|
boolean_t zfs_prop_valid_for_type(int, zfs_type_t, boolean_t);
|
|
|
|
/*
|
|
* Pool property functions shared between libzfs and kernel.
|
|
*/
|
|
zpool_prop_t zpool_name_to_prop(const char *);
|
|
const char *zpool_prop_to_name(zpool_prop_t);
|
|
const char *zpool_prop_default_string(zpool_prop_t);
|
|
uint64_t zpool_prop_default_numeric(zpool_prop_t);
|
|
boolean_t zpool_prop_readonly(zpool_prop_t);
|
|
boolean_t zpool_prop_setonce(zpool_prop_t);
|
|
boolean_t zpool_prop_feature(const char *);
|
|
boolean_t zpool_prop_unsupported(const char *);
|
|
int zpool_prop_index_to_string(zpool_prop_t, uint64_t, const char **);
|
|
int zpool_prop_string_to_index(zpool_prop_t, const char *, uint64_t *);
|
|
uint64_t zpool_prop_random_value(zpool_prop_t, uint64_t seed);
|
|
|
|
/*
|
|
* Definitions for the Delegation.
|
|
*/
|
|
typedef enum {
|
|
ZFS_DELEG_WHO_UNKNOWN = 0,
|
|
ZFS_DELEG_USER = 'u',
|
|
ZFS_DELEG_USER_SETS = 'U',
|
|
ZFS_DELEG_GROUP = 'g',
|
|
ZFS_DELEG_GROUP_SETS = 'G',
|
|
ZFS_DELEG_EVERYONE = 'e',
|
|
ZFS_DELEG_EVERYONE_SETS = 'E',
|
|
ZFS_DELEG_CREATE = 'c',
|
|
ZFS_DELEG_CREATE_SETS = 'C',
|
|
ZFS_DELEG_NAMED_SET = 's',
|
|
ZFS_DELEG_NAMED_SET_SETS = 'S'
|
|
} zfs_deleg_who_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_DELEG_NONE = 0,
|
|
ZFS_DELEG_PERM_LOCAL = 1,
|
|
ZFS_DELEG_PERM_DESCENDENT = 2,
|
|
ZFS_DELEG_PERM_LOCALDESCENDENT = 3,
|
|
ZFS_DELEG_PERM_CREATE = 4
|
|
} zfs_deleg_inherit_t;
|
|
|
|
#define ZFS_DELEG_PERM_UID "uid"
|
|
#define ZFS_DELEG_PERM_GID "gid"
|
|
#define ZFS_DELEG_PERM_GROUPS "groups"
|
|
|
|
#define ZFS_MLSLABEL_DEFAULT "none"
|
|
|
|
#define ZFS_SMB_ACL_SRC "src"
|
|
#define ZFS_SMB_ACL_TARGET "target"
|
|
|
|
typedef enum {
|
|
ZFS_CANMOUNT_OFF = 0,
|
|
ZFS_CANMOUNT_ON = 1,
|
|
ZFS_CANMOUNT_NOAUTO = 2
|
|
} zfs_canmount_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_LOGBIAS_LATENCY = 0,
|
|
ZFS_LOGBIAS_THROUGHPUT = 1
|
|
} zfs_logbias_op_t;
|
|
|
|
typedef enum zfs_share_op {
|
|
ZFS_SHARE_NFS = 0,
|
|
ZFS_UNSHARE_NFS = 1,
|
|
ZFS_SHARE_SMB = 2,
|
|
ZFS_UNSHARE_SMB = 3
|
|
} zfs_share_op_t;
|
|
|
|
typedef enum zfs_smb_acl_op {
|
|
ZFS_SMB_ACL_ADD,
|
|
ZFS_SMB_ACL_REMOVE,
|
|
ZFS_SMB_ACL_RENAME,
|
|
ZFS_SMB_ACL_PURGE
|
|
} zfs_smb_acl_op_t;
|
|
|
|
typedef enum zfs_cache_type {
|
|
ZFS_CACHE_NONE = 0,
|
|
ZFS_CACHE_METADATA = 1,
|
|
ZFS_CACHE_ALL = 2
|
|
} zfs_cache_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_SYNC_STANDARD = 0,
|
|
ZFS_SYNC_ALWAYS = 1,
|
|
ZFS_SYNC_DISABLED = 2
|
|
} zfs_sync_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_XATTR_OFF = 0,
|
|
ZFS_XATTR_DIR = 1,
|
|
ZFS_XATTR_SA = 2
|
|
} zfs_xattr_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_DNSIZE_LEGACY = 0,
|
|
ZFS_DNSIZE_AUTO = 1,
|
|
ZFS_DNSIZE_1K = 1024,
|
|
ZFS_DNSIZE_2K = 2048,
|
|
ZFS_DNSIZE_4K = 4096,
|
|
ZFS_DNSIZE_8K = 8192,
|
|
ZFS_DNSIZE_16K = 16384
|
|
} zfs_dnsize_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_REDUNDANT_METADATA_ALL,
|
|
ZFS_REDUNDANT_METADATA_MOST
|
|
} zfs_redundant_metadata_type_t;
|
|
|
|
typedef enum {
|
|
ZFS_VOLMODE_DEFAULT = 0,
|
|
ZFS_VOLMODE_GEOM = 1,
|
|
ZFS_VOLMODE_DEV = 2,
|
|
ZFS_VOLMODE_NONE = 3
|
|
} zfs_volmode_t;
|
|
|
|
typedef enum zfs_keystatus {
|
|
ZFS_KEYSTATUS_NONE = 0,
|
|
ZFS_KEYSTATUS_UNAVAILABLE,
|
|
ZFS_KEYSTATUS_AVAILABLE,
|
|
} zfs_keystatus_t;
|
|
|
|
typedef enum zfs_keyformat {
|
|
ZFS_KEYFORMAT_NONE = 0,
|
|
ZFS_KEYFORMAT_RAW,
|
|
ZFS_KEYFORMAT_HEX,
|
|
ZFS_KEYFORMAT_PASSPHRASE,
|
|
ZFS_KEYFORMAT_FORMATS
|
|
} zfs_keyformat_t;
|
|
|
|
typedef enum zfs_key_location {
|
|
ZFS_KEYLOCATION_NONE = 0,
|
|
ZFS_KEYLOCATION_PROMPT,
|
|
ZFS_KEYLOCATION_URI,
|
|
ZFS_KEYLOCATION_LOCATIONS
|
|
} zfs_keylocation_t;
|
|
|
|
#define DEFAULT_PBKDF2_ITERATIONS 350000
|
|
#define MIN_PBKDF2_ITERATIONS 100000
|
|
|
|
/*
|
|
* On-disk version number.
|
|
*/
|
|
#define SPA_VERSION_1 1ULL
|
|
#define SPA_VERSION_2 2ULL
|
|
#define SPA_VERSION_3 3ULL
|
|
#define SPA_VERSION_4 4ULL
|
|
#define SPA_VERSION_5 5ULL
|
|
#define SPA_VERSION_6 6ULL
|
|
#define SPA_VERSION_7 7ULL
|
|
#define SPA_VERSION_8 8ULL
|
|
#define SPA_VERSION_9 9ULL
|
|
#define SPA_VERSION_10 10ULL
|
|
#define SPA_VERSION_11 11ULL
|
|
#define SPA_VERSION_12 12ULL
|
|
#define SPA_VERSION_13 13ULL
|
|
#define SPA_VERSION_14 14ULL
|
|
#define SPA_VERSION_15 15ULL
|
|
#define SPA_VERSION_16 16ULL
|
|
#define SPA_VERSION_17 17ULL
|
|
#define SPA_VERSION_18 18ULL
|
|
#define SPA_VERSION_19 19ULL
|
|
#define SPA_VERSION_20 20ULL
|
|
#define SPA_VERSION_21 21ULL
|
|
#define SPA_VERSION_22 22ULL
|
|
#define SPA_VERSION_23 23ULL
|
|
#define SPA_VERSION_24 24ULL
|
|
#define SPA_VERSION_25 25ULL
|
|
#define SPA_VERSION_26 26ULL
|
|
#define SPA_VERSION_27 27ULL
|
|
#define SPA_VERSION_28 28ULL
|
|
#define SPA_VERSION_5000 5000ULL
|
|
|
|
/*
|
|
* When bumping up SPA_VERSION, make sure GRUB ZFS understands the on-disk
|
|
* format change. Go to usr/src/grub/grub-0.97/stage2/{zfs-include/, fsys_zfs*},
|
|
* and do the appropriate changes. Also bump the version number in
|
|
* usr/src/grub/capability.
|
|
*/
|
|
#define SPA_VERSION SPA_VERSION_5000
|
|
#define SPA_VERSION_STRING "5000"
|
|
|
|
/*
|
|
* Symbolic names for the changes that caused a SPA_VERSION switch.
|
|
* Used in the code when checking for presence or absence of a feature.
|
|
* Feel free to define multiple symbolic names for each version if there
|
|
* were multiple changes to on-disk structures during that version.
|
|
*
|
|
* NOTE: When checking the current SPA_VERSION in your code, be sure
|
|
* to use spa_version() since it reports the version of the
|
|
* last synced uberblock. Checking the in-flight version can
|
|
* be dangerous in some cases.
|
|
*/
|
|
#define SPA_VERSION_INITIAL SPA_VERSION_1
|
|
#define SPA_VERSION_DITTO_BLOCKS SPA_VERSION_2
|
|
#define SPA_VERSION_SPARES SPA_VERSION_3
|
|
#define SPA_VERSION_RAIDZ2 SPA_VERSION_3
|
|
#define SPA_VERSION_BPOBJ_ACCOUNT SPA_VERSION_3
|
|
#define SPA_VERSION_RAIDZ_DEFLATE SPA_VERSION_3
|
|
#define SPA_VERSION_DNODE_BYTES SPA_VERSION_3
|
|
#define SPA_VERSION_ZPOOL_HISTORY SPA_VERSION_4
|
|
#define SPA_VERSION_GZIP_COMPRESSION SPA_VERSION_5
|
|
#define SPA_VERSION_BOOTFS SPA_VERSION_6
|
|
#define SPA_VERSION_SLOGS SPA_VERSION_7
|
|
#define SPA_VERSION_DELEGATED_PERMS SPA_VERSION_8
|
|
#define SPA_VERSION_FUID SPA_VERSION_9
|
|
#define SPA_VERSION_REFRESERVATION SPA_VERSION_9
|
|
#define SPA_VERSION_REFQUOTA SPA_VERSION_9
|
|
#define SPA_VERSION_UNIQUE_ACCURATE SPA_VERSION_9
|
|
#define SPA_VERSION_L2CACHE SPA_VERSION_10
|
|
#define SPA_VERSION_NEXT_CLONES SPA_VERSION_11
|
|
#define SPA_VERSION_ORIGIN SPA_VERSION_11
|
|
#define SPA_VERSION_DSL_SCRUB SPA_VERSION_11
|
|
#define SPA_VERSION_SNAP_PROPS SPA_VERSION_12
|
|
#define SPA_VERSION_USED_BREAKDOWN SPA_VERSION_13
|
|
#define SPA_VERSION_PASSTHROUGH_X SPA_VERSION_14
|
|
#define SPA_VERSION_USERSPACE SPA_VERSION_15
|
|
#define SPA_VERSION_STMF_PROP SPA_VERSION_16
|
|
#define SPA_VERSION_RAIDZ3 SPA_VERSION_17
|
|
#define SPA_VERSION_USERREFS SPA_VERSION_18
|
|
#define SPA_VERSION_HOLES SPA_VERSION_19
|
|
#define SPA_VERSION_ZLE_COMPRESSION SPA_VERSION_20
|
|
#define SPA_VERSION_DEDUP SPA_VERSION_21
|
|
#define SPA_VERSION_RECVD_PROPS SPA_VERSION_22
|
|
#define SPA_VERSION_SLIM_ZIL SPA_VERSION_23
|
|
#define SPA_VERSION_SA SPA_VERSION_24
|
|
#define SPA_VERSION_SCAN SPA_VERSION_25
|
|
#define SPA_VERSION_DIR_CLONES SPA_VERSION_26
|
|
#define SPA_VERSION_DEADLISTS SPA_VERSION_26
|
|
#define SPA_VERSION_FAST_SNAP SPA_VERSION_27
|
|
#define SPA_VERSION_MULTI_REPLACE SPA_VERSION_28
|
|
#define SPA_VERSION_BEFORE_FEATURES SPA_VERSION_28
|
|
#define SPA_VERSION_FEATURES SPA_VERSION_5000
|
|
|
|
#define SPA_VERSION_IS_SUPPORTED(v) \
|
|
(((v) >= SPA_VERSION_INITIAL && (v) <= SPA_VERSION_BEFORE_FEATURES) || \
|
|
((v) >= SPA_VERSION_FEATURES && (v) <= SPA_VERSION))
|
|
|
|
/*
|
|
* ZPL version - rev'd whenever an incompatible on-disk format change
|
|
* occurs. This is independent of SPA/DMU/ZAP versioning. You must
|
|
* also update the version_table[] and help message in zfs_prop.c.
|
|
*
|
|
* When changing, be sure to teach GRUB how to read the new format!
|
|
* See usr/src/grub/grub-0.97/stage2/{zfs-include/,fsys_zfs*}
|
|
*/
|
|
#define ZPL_VERSION_1 1ULL
|
|
#define ZPL_VERSION_2 2ULL
|
|
#define ZPL_VERSION_3 3ULL
|
|
#define ZPL_VERSION_4 4ULL
|
|
#define ZPL_VERSION_5 5ULL
|
|
#define ZPL_VERSION ZPL_VERSION_5
|
|
#define ZPL_VERSION_STRING "5"
|
|
|
|
#define ZPL_VERSION_INITIAL ZPL_VERSION_1
|
|
#define ZPL_VERSION_DIRENT_TYPE ZPL_VERSION_2
|
|
#define ZPL_VERSION_FUID ZPL_VERSION_3
|
|
#define ZPL_VERSION_NORMALIZATION ZPL_VERSION_3
|
|
#define ZPL_VERSION_SYSATTR ZPL_VERSION_3
|
|
#define ZPL_VERSION_USERSPACE ZPL_VERSION_4
|
|
#define ZPL_VERSION_SA ZPL_VERSION_5
|
|
|
|
/* Rewind policy information */
|
|
#define ZPOOL_NO_REWIND 1 /* No policy - default behavior */
|
|
#define ZPOOL_NEVER_REWIND 2 /* Do not search for best txg or rewind */
|
|
#define ZPOOL_TRY_REWIND 4 /* Search for best txg, but do not rewind */
|
|
#define ZPOOL_DO_REWIND 8 /* Rewind to best txg w/in deferred frees */
|
|
#define ZPOOL_EXTREME_REWIND 16 /* Allow extreme measures to find best txg */
|
|
#define ZPOOL_REWIND_MASK 28 /* All the possible rewind bits */
|
|
#define ZPOOL_REWIND_POLICIES 31 /* All the possible policy bits */
|
|
|
|
typedef struct zpool_load_policy {
|
|
uint32_t zlp_rewind; /* rewind policy requested */
|
|
uint64_t zlp_maxmeta; /* max acceptable meta-data errors */
|
|
uint64_t zlp_maxdata; /* max acceptable data errors */
|
|
uint64_t zlp_txg; /* specific txg to load */
|
|
} zpool_load_policy_t;
|
|
|
|
/*
|
|
* The following are configuration names used in the nvlist describing a pool's
|
|
* configuration. New on-disk names should be prefixed with "<reverse-DNS>:"
|
|
* (e.g. "org.open-zfs:") to avoid conflicting names being developed
|
|
* independently.
|
|
*/
|
|
#define ZPOOL_CONFIG_VERSION "version"
|
|
#define ZPOOL_CONFIG_POOL_NAME "name"
|
|
#define ZPOOL_CONFIG_POOL_STATE "state"
|
|
#define ZPOOL_CONFIG_POOL_TXG "txg"
|
|
#define ZPOOL_CONFIG_POOL_GUID "pool_guid"
|
|
#define ZPOOL_CONFIG_CREATE_TXG "create_txg"
|
|
#define ZPOOL_CONFIG_TOP_GUID "top_guid"
|
|
#define ZPOOL_CONFIG_VDEV_TREE "vdev_tree"
|
|
#define ZPOOL_CONFIG_TYPE "type"
|
|
#define ZPOOL_CONFIG_CHILDREN "children"
|
|
#define ZPOOL_CONFIG_ID "id"
|
|
#define ZPOOL_CONFIG_GUID "guid"
|
|
#define ZPOOL_CONFIG_INDIRECT_OBJECT "com.delphix:indirect_object"
|
|
#define ZPOOL_CONFIG_INDIRECT_BIRTHS "com.delphix:indirect_births"
|
|
#define ZPOOL_CONFIG_PREV_INDIRECT_VDEV "com.delphix:prev_indirect_vdev"
|
|
#define ZPOOL_CONFIG_PATH "path"
|
|
#define ZPOOL_CONFIG_DEVID "devid"
|
|
#define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array"
|
|
#define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift"
|
|
#define ZPOOL_CONFIG_ASHIFT "ashift"
|
|
#define ZPOOL_CONFIG_ASIZE "asize"
|
|
#define ZPOOL_CONFIG_DTL "DTL"
|
|
#define ZPOOL_CONFIG_SCAN_STATS "scan_stats" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_REMOVAL_STATS "removal_stats" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_CHECKPOINT_STATS "checkpoint_stats" /* not on disk */
|
|
#define ZPOOL_CONFIG_VDEV_STATS "vdev_stats" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_INDIRECT_SIZE "indirect_size" /* not stored on disk */
|
|
|
|
/* container nvlist of extended stats */
|
|
#define ZPOOL_CONFIG_VDEV_STATS_EX "vdev_stats_ex"
|
|
|
|
/* Active queue read/write stats */
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_R_ACTIVE_QUEUE "vdev_sync_r_active_queue"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_W_ACTIVE_QUEUE "vdev_sync_w_active_queue"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_R_ACTIVE_QUEUE "vdev_async_r_active_queue"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_W_ACTIVE_QUEUE "vdev_async_w_active_queue"
|
|
#define ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE "vdev_async_scrub_active_queue"
|
|
|
|
/* Queue sizes */
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_R_PEND_QUEUE "vdev_sync_r_pend_queue"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_W_PEND_QUEUE "vdev_sync_w_pend_queue"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_R_PEND_QUEUE "vdev_async_r_pend_queue"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_W_PEND_QUEUE "vdev_async_w_pend_queue"
|
|
#define ZPOOL_CONFIG_VDEV_SCRUB_PEND_QUEUE "vdev_async_scrub_pend_queue"
|
|
|
|
/* Latency read/write histogram stats */
|
|
#define ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO "vdev_tot_r_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_TOT_W_LAT_HISTO "vdev_tot_w_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_DISK_R_LAT_HISTO "vdev_disk_r_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_DISK_W_LAT_HISTO "vdev_disk_w_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_R_LAT_HISTO "vdev_sync_r_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_W_LAT_HISTO "vdev_sync_w_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_R_LAT_HISTO "vdev_async_r_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_W_LAT_HISTO "vdev_async_w_lat_histo"
|
|
#define ZPOOL_CONFIG_VDEV_SCRUB_LAT_HISTO "vdev_scrub_histo"
|
|
|
|
/* Request size histograms */
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_IND_R_HISTO "vdev_sync_ind_r_histo"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_IND_W_HISTO "vdev_sync_ind_w_histo"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_IND_R_HISTO "vdev_async_ind_r_histo"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_IND_W_HISTO "vdev_async_ind_w_histo"
|
|
#define ZPOOL_CONFIG_VDEV_IND_SCRUB_HISTO "vdev_ind_scrub_histo"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_AGG_R_HISTO "vdev_sync_agg_r_histo"
|
|
#define ZPOOL_CONFIG_VDEV_SYNC_AGG_W_HISTO "vdev_sync_agg_w_histo"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_AGG_R_HISTO "vdev_async_agg_r_histo"
|
|
#define ZPOOL_CONFIG_VDEV_ASYNC_AGG_W_HISTO "vdev_async_agg_w_histo"
|
|
#define ZPOOL_CONFIG_VDEV_AGG_SCRUB_HISTO "vdev_agg_scrub_histo"
|
|
|
|
/* vdev enclosure sysfs path */
|
|
#define ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH "vdev_enc_sysfs_path"
|
|
|
|
#define ZPOOL_CONFIG_WHOLE_DISK "whole_disk"
|
|
#define ZPOOL_CONFIG_ERRCOUNT "error_count"
|
|
#define ZPOOL_CONFIG_NOT_PRESENT "not_present"
|
|
#define ZPOOL_CONFIG_SPARES "spares"
|
|
#define ZPOOL_CONFIG_IS_SPARE "is_spare"
|
|
#define ZPOOL_CONFIG_NPARITY "nparity"
|
|
#define ZPOOL_CONFIG_HOSTID "hostid"
|
|
#define ZPOOL_CONFIG_HOSTNAME "hostname"
|
|
#define ZPOOL_CONFIG_LOADED_TIME "initial_load_time"
|
|
#define ZPOOL_CONFIG_UNSPARE "unspare"
|
|
#define ZPOOL_CONFIG_PHYS_PATH "phys_path"
|
|
#define ZPOOL_CONFIG_IS_LOG "is_log"
|
|
#define ZPOOL_CONFIG_L2CACHE "l2cache"
|
|
#define ZPOOL_CONFIG_HOLE_ARRAY "hole_array"
|
|
#define ZPOOL_CONFIG_VDEV_CHILDREN "vdev_children"
|
|
#define ZPOOL_CONFIG_IS_HOLE "is_hole"
|
|
#define ZPOOL_CONFIG_DDT_HISTOGRAM "ddt_histogram"
|
|
#define ZPOOL_CONFIG_DDT_OBJ_STATS "ddt_object_stats"
|
|
#define ZPOOL_CONFIG_DDT_STATS "ddt_stats"
|
|
#define ZPOOL_CONFIG_SPLIT "splitcfg"
|
|
#define ZPOOL_CONFIG_ORIG_GUID "orig_guid"
|
|
#define ZPOOL_CONFIG_SPLIT_GUID "split_guid"
|
|
#define ZPOOL_CONFIG_SPLIT_LIST "guid_list"
|
|
#define ZPOOL_CONFIG_REMOVING "removing"
|
|
#define ZPOOL_CONFIG_RESILVER_TXG "resilver_txg"
|
|
#define ZPOOL_CONFIG_COMMENT "comment"
|
|
#define ZPOOL_CONFIG_SUSPENDED "suspended" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_SUSPENDED_REASON "suspended_reason" /* not stored */
|
|
#define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_BOOTFS "bootfs" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_MISSING_DEVICES "missing_vdevs" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_LOAD_INFO "load_info" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_REWIND_INFO "rewind_info" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_UNSUP_FEAT "unsup_feat" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_ENABLED_FEAT "enabled_feat" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_CAN_RDONLY "can_rdonly" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_FEATURES_FOR_READ "features_for_read"
|
|
#define ZPOOL_CONFIG_FEATURE_STATS "feature_stats" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_ERRATA "errata" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_VDEV_TOP_ZAP "com.delphix:vdev_zap_top"
|
|
#define ZPOOL_CONFIG_VDEV_LEAF_ZAP "com.delphix:vdev_zap_leaf"
|
|
#define ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS "com.delphix:has_per_vdev_zaps"
|
|
#define ZPOOL_CONFIG_RESILVER_DEFER "com.datto:resilver_defer"
|
|
#define ZPOOL_CONFIG_CACHEFILE "cachefile" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_MMP_STATE "mmp_state" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_MMP_TXG "mmp_txg" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_MMP_HOSTNAME "mmp_hostname" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_MMP_HOSTID "mmp_hostid" /* not stored on disk */
|
|
#define ZPOOL_CONFIG_ALLOCATION_BIAS "alloc_bias" /* not stored on disk */
|
|
|
|
/*
|
|
* The persistent vdev state is stored as separate values rather than a single
|
|
* 'vdev_state' entry. This is because a device can be in multiple states, such
|
|
* as offline and degraded.
|
|
*/
|
|
#define ZPOOL_CONFIG_OFFLINE "offline"
|
|
#define ZPOOL_CONFIG_FAULTED "faulted"
|
|
#define ZPOOL_CONFIG_DEGRADED "degraded"
|
|
#define ZPOOL_CONFIG_REMOVED "removed"
|
|
#define ZPOOL_CONFIG_FRU "fru"
|
|
#define ZPOOL_CONFIG_AUX_STATE "aux_state"
|
|
|
|
/* Pool load policy parameters */
|
|
#define ZPOOL_LOAD_POLICY "load-policy"
|
|
#define ZPOOL_LOAD_REWIND_POLICY "load-rewind-policy"
|
|
#define ZPOOL_LOAD_REQUEST_TXG "load-request-txg"
|
|
#define ZPOOL_LOAD_META_THRESH "load-meta-thresh"
|
|
#define ZPOOL_LOAD_DATA_THRESH "load-data-thresh"
|
|
|
|
/* Rewind data discovered */
|
|
#define ZPOOL_CONFIG_LOAD_TIME "rewind_txg_ts"
|
|
#define ZPOOL_CONFIG_LOAD_DATA_ERRORS "verify_data_errors"
|
|
#define ZPOOL_CONFIG_REWIND_TIME "seconds_of_rewind"
|
|
|
|
#define VDEV_TYPE_ROOT "root"
|
|
#define VDEV_TYPE_MIRROR "mirror"
|
|
#define VDEV_TYPE_REPLACING "replacing"
|
|
#define VDEV_TYPE_RAIDZ "raidz"
|
|
#define VDEV_TYPE_DISK "disk"
|
|
#define VDEV_TYPE_FILE "file"
|
|
#define VDEV_TYPE_MISSING "missing"
|
|
#define VDEV_TYPE_HOLE "hole"
|
|
#define VDEV_TYPE_SPARE "spare"
|
|
#define VDEV_TYPE_LOG "log"
|
|
#define VDEV_TYPE_L2CACHE "l2cache"
|
|
#define VDEV_TYPE_INDIRECT "indirect"
|
|
|
|
/* VDEV_TOP_ZAP_* are used in top-level vdev ZAP objects. */
|
|
#define VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM \
|
|
"com.delphix:indirect_obsolete_sm"
|
|
#define VDEV_TOP_ZAP_OBSOLETE_COUNTS_ARE_PRECISE \
|
|
"com.delphix:obsolete_counts_are_precise"
|
|
#define VDEV_TOP_ZAP_POOL_CHECKPOINT_SM \
|
|
"com.delphix:pool_checkpoint_sm"
|
|
|
|
#define VDEV_TOP_ZAP_ALLOCATION_BIAS \
|
|
"org.zfsonlinux:allocation_bias"
|
|
|
|
/* vdev metaslab allocation bias */
|
|
#define VDEV_ALLOC_BIAS_LOG "log"
|
|
#define VDEV_ALLOC_BIAS_SPECIAL "special"
|
|
#define VDEV_ALLOC_BIAS_DEDUP "dedup"
|
|
|
|
/*
|
|
* This is needed in userland to report the minimum necessary device size.
|
|
*/
|
|
#define SPA_MINDEVSIZE (64ULL << 20)
|
|
|
|
/*
|
|
* Set if the fragmentation has not yet been calculated. This can happen
|
|
* because the space maps have not been upgraded or the histogram feature
|
|
* is not enabled.
|
|
*/
|
|
#define ZFS_FRAG_INVALID UINT64_MAX
|
|
|
|
/*
|
|
* The location of the pool configuration repository, shared between kernel and
|
|
* userland.
|
|
*/
|
|
#define ZPOOL_CACHE "/etc/zfs/zpool.cache"
|
|
|
|
/*
|
|
* vdev states are ordered from least to most healthy.
|
|
* A vdev that's CANT_OPEN or below is considered unusable.
|
|
*/
|
|
typedef enum vdev_state {
|
|
VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */
|
|
VDEV_STATE_CLOSED, /* Not currently open */
|
|
VDEV_STATE_OFFLINE, /* Not allowed to open */
|
|
VDEV_STATE_REMOVED, /* Explicitly removed from system */
|
|
VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */
|
|
VDEV_STATE_FAULTED, /* External request to fault device */
|
|
VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */
|
|
VDEV_STATE_HEALTHY /* Presumed good */
|
|
} vdev_state_t;
|
|
|
|
#define VDEV_STATE_ONLINE VDEV_STATE_HEALTHY
|
|
|
|
/*
|
|
* vdev aux states. When a vdev is in the CANT_OPEN state, the aux field
|
|
* of the vdev stats structure uses these constants to distinguish why.
|
|
*/
|
|
typedef enum vdev_aux {
|
|
VDEV_AUX_NONE, /* no error */
|
|
VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */
|
|
VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */
|
|
VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */
|
|
VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */
|
|
VDEV_AUX_TOO_SMALL, /* vdev size is too small */
|
|
VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */
|
|
VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */
|
|
VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */
|
|
VDEV_AUX_UNSUP_FEAT, /* unsupported features */
|
|
VDEV_AUX_SPARED, /* hot spare used in another pool */
|
|
VDEV_AUX_ERR_EXCEEDED, /* too many errors */
|
|
VDEV_AUX_IO_FAILURE, /* experienced I/O failure */
|
|
VDEV_AUX_BAD_LOG, /* cannot read log chain(s) */
|
|
VDEV_AUX_EXTERNAL, /* external diagnosis or forced fault */
|
|
VDEV_AUX_SPLIT_POOL, /* vdev was split off into another pool */
|
|
VDEV_AUX_BAD_ASHIFT, /* vdev ashift is invalid */
|
|
VDEV_AUX_EXTERNAL_PERSIST, /* persistent forced fault */
|
|
VDEV_AUX_ACTIVE, /* vdev active on a different host */
|
|
VDEV_AUX_CHILDREN_OFFLINE, /* all children are offline */
|
|
} vdev_aux_t;
|
|
|
|
/*
|
|
* pool state. The following states are written to disk as part of the normal
|
|
* SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE, L2CACHE. The remaining
|
|
* states are software abstractions used at various levels to communicate
|
|
* pool state.
|
|
*/
|
|
typedef enum pool_state {
|
|
POOL_STATE_ACTIVE = 0, /* In active use */
|
|
POOL_STATE_EXPORTED, /* Explicitly exported */
|
|
POOL_STATE_DESTROYED, /* Explicitly destroyed */
|
|
POOL_STATE_SPARE, /* Reserved for hot spare use */
|
|
POOL_STATE_L2CACHE, /* Level 2 ARC device */
|
|
POOL_STATE_UNINITIALIZED, /* Internal spa_t state */
|
|
POOL_STATE_UNAVAIL, /* Internal libzfs state */
|
|
POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */
|
|
} pool_state_t;
|
|
|
|
/*
|
|
* mmp state. The following states provide additional detail describing
|
|
* why a pool couldn't be safely imported.
|
|
*/
|
|
typedef enum mmp_state {
|
|
MMP_STATE_ACTIVE = 0, /* In active use */
|
|
MMP_STATE_INACTIVE, /* Inactive and safe to import */
|
|
MMP_STATE_NO_HOSTID /* System hostid is not set */
|
|
} mmp_state_t;
|
|
|
|
/*
|
|
* Scan Functions.
|
|
*/
|
|
typedef enum pool_scan_func {
|
|
POOL_SCAN_NONE,
|
|
POOL_SCAN_SCRUB,
|
|
POOL_SCAN_RESILVER,
|
|
POOL_SCAN_FUNCS
|
|
} pool_scan_func_t;
|
|
|
|
/*
|
|
* Used to control scrub pause and resume.
|
|
*/
|
|
typedef enum pool_scrub_cmd {
|
|
POOL_SCRUB_NORMAL = 0,
|
|
POOL_SCRUB_PAUSE,
|
|
POOL_SCRUB_FLAGS_END
|
|
} pool_scrub_cmd_t;
|
|
|
|
typedef enum {
|
|
CS_NONE,
|
|
CS_CHECKPOINT_EXISTS,
|
|
CS_CHECKPOINT_DISCARDING,
|
|
CS_NUM_STATES
|
|
} checkpoint_state_t;
|
|
|
|
typedef struct pool_checkpoint_stat {
|
|
uint64_t pcs_state; /* checkpoint_state_t */
|
|
uint64_t pcs_start_time; /* time checkpoint/discard started */
|
|
uint64_t pcs_space; /* checkpointed space */
|
|
} pool_checkpoint_stat_t;
|
|
|
|
/*
|
|
* ZIO types. Needed to interpret vdev statistics below.
|
|
*/
|
|
typedef enum zio_type {
|
|
ZIO_TYPE_NULL = 0,
|
|
ZIO_TYPE_READ,
|
|
ZIO_TYPE_WRITE,
|
|
ZIO_TYPE_FREE,
|
|
ZIO_TYPE_CLAIM,
|
|
ZIO_TYPE_IOCTL,
|
|
ZIO_TYPES
|
|
} zio_type_t;
|
|
|
|
/*
|
|
* Pool statistics. Note: all fields should be 64-bit because this
|
|
* is passed between kernel and userland as an nvlist uint64 array.
|
|
*/
|
|
typedef struct pool_scan_stat {
|
|
/* values stored on disk */
|
|
uint64_t pss_func; /* pool_scan_func_t */
|
|
uint64_t pss_state; /* dsl_scan_state_t */
|
|
uint64_t pss_start_time; /* scan start time */
|
|
uint64_t pss_end_time; /* scan end time */
|
|
uint64_t pss_to_examine; /* total bytes to scan */
|
|
uint64_t pss_examined; /* total bytes located by scanner */
|
|
uint64_t pss_to_process; /* total bytes to process */
|
|
uint64_t pss_processed; /* total processed bytes */
|
|
uint64_t pss_errors; /* scan errors */
|
|
|
|
/* values not stored on disk */
|
|
uint64_t pss_pass_exam; /* examined bytes per scan pass */
|
|
uint64_t pss_pass_start; /* start time of a scan pass */
|
|
uint64_t pss_pass_scrub_pause; /* pause time of a scurb pass */
|
|
/* cumulative time scrub spent paused, needed for rate calculation */
|
|
uint64_t pss_pass_scrub_spent_paused;
|
|
uint64_t pss_pass_issued; /* issued bytes per scan pass */
|
|
uint64_t pss_issued; /* total bytes checked by scanner */
|
|
} pool_scan_stat_t;
|
|
|
|
typedef struct pool_removal_stat {
|
|
uint64_t prs_state; /* dsl_scan_state_t */
|
|
uint64_t prs_removing_vdev;
|
|
uint64_t prs_start_time;
|
|
uint64_t prs_end_time;
|
|
uint64_t prs_to_copy; /* bytes that need to be copied */
|
|
uint64_t prs_copied; /* bytes copied so far */
|
|
/*
|
|
* bytes of memory used for indirect mappings.
|
|
* This includes all removed vdevs.
|
|
*/
|
|
uint64_t prs_mapping_memory;
|
|
} pool_removal_stat_t;
|
|
|
|
typedef enum dsl_scan_state {
|
|
DSS_NONE,
|
|
DSS_SCANNING,
|
|
DSS_FINISHED,
|
|
DSS_CANCELED,
|
|
DSS_NUM_STATES
|
|
} dsl_scan_state_t;
|
|
|
|
/*
|
|
* Errata described by http://zfsonlinux.org/msg/ZFS-8000-ER. The ordering
|
|
* of this enum must be maintained to ensure the errata identifiers map to
|
|
* the correct documentation. New errata may only be appended to the list
|
|
* and must contain corresponding documentation at the above link.
|
|
*/
|
|
typedef enum zpool_errata {
|
|
ZPOOL_ERRATA_NONE,
|
|
ZPOOL_ERRATA_ZOL_2094_SCRUB,
|
|
ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY,
|
|
ZPOOL_ERRATA_ZOL_6845_ENCRYPTION,
|
|
} zpool_errata_t;
|
|
|
|
/*
|
|
* Vdev statistics. Note: all fields should be 64-bit because this
|
|
* is passed between kernel and userland as an nvlist uint64 array.
|
|
*/
|
|
typedef struct vdev_stat {
|
|
hrtime_t vs_timestamp; /* time since vdev load */
|
|
uint64_t vs_state; /* vdev state */
|
|
uint64_t vs_aux; /* see vdev_aux_t */
|
|
uint64_t vs_alloc; /* space allocated */
|
|
uint64_t vs_space; /* total capacity */
|
|
uint64_t vs_dspace; /* deflated capacity */
|
|
uint64_t vs_rsize; /* replaceable dev size */
|
|
uint64_t vs_esize; /* expandable dev size */
|
|
uint64_t vs_ops[ZIO_TYPES]; /* operation count */
|
|
uint64_t vs_bytes[ZIO_TYPES]; /* bytes read/written */
|
|
uint64_t vs_read_errors; /* read errors */
|
|
uint64_t vs_write_errors; /* write errors */
|
|
uint64_t vs_checksum_errors; /* checksum errors */
|
|
uint64_t vs_self_healed; /* self-healed bytes */
|
|
uint64_t vs_scan_removing; /* removing? */
|
|
uint64_t vs_scan_processed; /* scan processed bytes */
|
|
uint64_t vs_fragmentation; /* device fragmentation */
|
|
uint64_t vs_checkpoint_space; /* checkpoint-consumed space */
|
|
uint64_t vs_resilver_deferred; /* resilver deferred */
|
|
} vdev_stat_t;
|
|
|
|
/*
|
|
* Extended stats
|
|
*
|
|
* These are stats which aren't included in the original iostat output. For
|
|
* convenience, they are grouped together in vdev_stat_ex, although each stat
|
|
* is individually exported as an nvlist.
|
|
*/
|
|
typedef struct vdev_stat_ex {
|
|
/* Number of ZIOs issued to disk and waiting to finish */
|
|
uint64_t vsx_active_queue[ZIO_PRIORITY_NUM_QUEUEABLE];
|
|
|
|
/* Number of ZIOs pending to be issued to disk */
|
|
uint64_t vsx_pend_queue[ZIO_PRIORITY_NUM_QUEUEABLE];
|
|
|
|
/*
|
|
* Below are the histograms for various latencies. Buckets are in
|
|
* units of nanoseconds.
|
|
*/
|
|
|
|
/*
|
|
* 2^37 nanoseconds = 134s. Timeouts will probably start kicking in
|
|
* before this.
|
|
*/
|
|
#define VDEV_L_HISTO_BUCKETS 37 /* Latency histo buckets */
|
|
#define VDEV_RQ_HISTO_BUCKETS 25 /* Request size histo buckets */
|
|
|
|
|
|
/* Amount of time in ZIO queue (ns) */
|
|
uint64_t vsx_queue_histo[ZIO_PRIORITY_NUM_QUEUEABLE]
|
|
[VDEV_L_HISTO_BUCKETS];
|
|
|
|
/* Total ZIO latency (ns). Includes queuing and disk access time */
|
|
uint64_t vsx_total_histo[ZIO_TYPES][VDEV_L_HISTO_BUCKETS];
|
|
|
|
/* Amount of time to read/write the disk (ns) */
|
|
uint64_t vsx_disk_histo[ZIO_TYPES][VDEV_L_HISTO_BUCKETS];
|
|
|
|
/* "lookup the bucket for a value" histogram macros */
|
|
#define HISTO(val, buckets) (val != 0 ? MIN(highbit64(val) - 1, \
|
|
buckets - 1) : 0)
|
|
#define L_HISTO(a) HISTO(a, VDEV_L_HISTO_BUCKETS)
|
|
#define RQ_HISTO(a) HISTO(a, VDEV_RQ_HISTO_BUCKETS)
|
|
|
|
/* Physical IO histogram */
|
|
uint64_t vsx_ind_histo[ZIO_PRIORITY_NUM_QUEUEABLE]
|
|
[VDEV_RQ_HISTO_BUCKETS];
|
|
|
|
/* Delegated (aggregated) physical IO histogram */
|
|
uint64_t vsx_agg_histo[ZIO_PRIORITY_NUM_QUEUEABLE]
|
|
[VDEV_RQ_HISTO_BUCKETS];
|
|
|
|
} vdev_stat_ex_t;
|
|
|
|
/*
|
|
* DDT statistics. Note: all fields should be 64-bit because this
|
|
* is passed between kernel and userland as an nvlist uint64 array.
|
|
*/
|
|
typedef struct ddt_object {
|
|
uint64_t ddo_count; /* number of elements in ddt */
|
|
uint64_t ddo_dspace; /* size of ddt on disk */
|
|
uint64_t ddo_mspace; /* size of ddt in-core */
|
|
} ddt_object_t;
|
|
|
|
typedef struct ddt_stat {
|
|
uint64_t dds_blocks; /* blocks */
|
|
uint64_t dds_lsize; /* logical size */
|
|
uint64_t dds_psize; /* physical size */
|
|
uint64_t dds_dsize; /* deflated allocated size */
|
|
uint64_t dds_ref_blocks; /* referenced blocks */
|
|
uint64_t dds_ref_lsize; /* referenced lsize * refcnt */
|
|
uint64_t dds_ref_psize; /* referenced psize * refcnt */
|
|
uint64_t dds_ref_dsize; /* referenced dsize * refcnt */
|
|
} ddt_stat_t;
|
|
|
|
typedef struct ddt_histogram {
|
|
ddt_stat_t ddh_stat[64]; /* power-of-two histogram buckets */
|
|
} ddt_histogram_t;
|
|
|
|
#define ZVOL_DRIVER "zvol"
|
|
#define ZFS_DRIVER "zfs"
|
|
#define ZFS_DEV "/dev/zfs"
|
|
#define ZFS_SHARETAB "/etc/dfs/sharetab"
|
|
|
|
#define ZFS_SUPER_MAGIC 0x2fc12fc1
|
|
|
|
/* general zvol path */
|
|
#define ZVOL_DIR "/dev"
|
|
|
|
#define ZVOL_MAJOR 230
|
|
#define ZVOL_MINOR_BITS 4
|
|
#define ZVOL_MINOR_MASK ((1U << ZVOL_MINOR_BITS) - 1)
|
|
#define ZVOL_MINORS (1 << 4)
|
|
#define ZVOL_DEV_NAME "zd"
|
|
|
|
#define ZVOL_PROP_NAME "name"
|
|
#define ZVOL_DEFAULT_BLOCKSIZE 8192
|
|
|
|
/*
|
|
* /dev/zfs ioctl numbers.
|
|
*
|
|
* These numbers cannot change over time. New ioctl numbers must be appended.
|
|
*/
|
|
typedef enum zfs_ioc {
|
|
/*
|
|
* Illumos - 71/128 numbers reserved.
|
|
*/
|
|
ZFS_IOC_FIRST = ('Z' << 8),
|
|
ZFS_IOC = ZFS_IOC_FIRST,
|
|
ZFS_IOC_POOL_CREATE = ZFS_IOC_FIRST, /* 0x5a00 */
|
|
ZFS_IOC_POOL_DESTROY, /* 0x5a01 */
|
|
ZFS_IOC_POOL_IMPORT, /* 0x5a02 */
|
|
ZFS_IOC_POOL_EXPORT, /* 0x5a03 */
|
|
ZFS_IOC_POOL_CONFIGS, /* 0x5a04 */
|
|
ZFS_IOC_POOL_STATS, /* 0x5a05 */
|
|
ZFS_IOC_POOL_TRYIMPORT, /* 0x5a06 */
|
|
ZFS_IOC_POOL_SCAN, /* 0x5a07 */
|
|
ZFS_IOC_POOL_FREEZE, /* 0x5a08 */
|
|
ZFS_IOC_POOL_UPGRADE, /* 0x5a09 */
|
|
ZFS_IOC_POOL_GET_HISTORY, /* 0x5a0a */
|
|
ZFS_IOC_VDEV_ADD, /* 0x5a0b */
|
|
ZFS_IOC_VDEV_REMOVE, /* 0x5a0c */
|
|
ZFS_IOC_VDEV_SET_STATE, /* 0x5a0d */
|
|
ZFS_IOC_VDEV_ATTACH, /* 0x5a0e */
|
|
ZFS_IOC_VDEV_DETACH, /* 0x5a0f */
|
|
ZFS_IOC_VDEV_SETPATH, /* 0x5a10 */
|
|
ZFS_IOC_VDEV_SETFRU, /* 0x5a11 */
|
|
ZFS_IOC_OBJSET_STATS, /* 0x5a12 */
|
|
ZFS_IOC_OBJSET_ZPLPROPS, /* 0x5a13 */
|
|
ZFS_IOC_DATASET_LIST_NEXT, /* 0x5a14 */
|
|
ZFS_IOC_SNAPSHOT_LIST_NEXT, /* 0x5a15 */
|
|
ZFS_IOC_SET_PROP, /* 0x5a16 */
|
|
ZFS_IOC_CREATE, /* 0x5a17 */
|
|
ZFS_IOC_DESTROY, /* 0x5a18 */
|
|
ZFS_IOC_ROLLBACK, /* 0x5a19 */
|
|
ZFS_IOC_RENAME, /* 0x5a1a */
|
|
ZFS_IOC_RECV, /* 0x5a1b */
|
|
ZFS_IOC_SEND, /* 0x5a1c */
|
|
ZFS_IOC_INJECT_FAULT, /* 0x5a1d */
|
|
ZFS_IOC_CLEAR_FAULT, /* 0x5a1e */
|
|
ZFS_IOC_INJECT_LIST_NEXT, /* 0x5a1f */
|
|
ZFS_IOC_ERROR_LOG, /* 0x5a20 */
|
|
ZFS_IOC_CLEAR, /* 0x5a21 */
|
|
ZFS_IOC_PROMOTE, /* 0x5a22 */
|
|
ZFS_IOC_SNAPSHOT, /* 0x5a23 */
|
|
ZFS_IOC_DSOBJ_TO_DSNAME, /* 0x5a24 */
|
|
ZFS_IOC_OBJ_TO_PATH, /* 0x5a25 */
|
|
ZFS_IOC_POOL_SET_PROPS, /* 0x5a26 */
|
|
ZFS_IOC_POOL_GET_PROPS, /* 0x5a27 */
|
|
ZFS_IOC_SET_FSACL, /* 0x5a28 */
|
|
ZFS_IOC_GET_FSACL, /* 0x5a29 */
|
|
ZFS_IOC_SHARE, /* 0x5a2a */
|
|
ZFS_IOC_INHERIT_PROP, /* 0x5a2b */
|
|
ZFS_IOC_SMB_ACL, /* 0x5a2c */
|
|
ZFS_IOC_USERSPACE_ONE, /* 0x5a2d */
|
|
ZFS_IOC_USERSPACE_MANY, /* 0x5a2e */
|
|
ZFS_IOC_USERSPACE_UPGRADE, /* 0x5a2f */
|
|
ZFS_IOC_HOLD, /* 0x5a30 */
|
|
ZFS_IOC_RELEASE, /* 0x5a31 */
|
|
ZFS_IOC_GET_HOLDS, /* 0x5a32 */
|
|
ZFS_IOC_OBJSET_RECVD_PROPS, /* 0x5a33 */
|
|
ZFS_IOC_VDEV_SPLIT, /* 0x5a34 */
|
|
ZFS_IOC_NEXT_OBJ, /* 0x5a35 */
|
|
ZFS_IOC_DIFF, /* 0x5a36 */
|
|
ZFS_IOC_TMP_SNAPSHOT, /* 0x5a37 */
|
|
ZFS_IOC_OBJ_TO_STATS, /* 0x5a38 */
|
|
ZFS_IOC_SPACE_WRITTEN, /* 0x5a39 */
|
|
ZFS_IOC_SPACE_SNAPS, /* 0x5a3a */
|
|
ZFS_IOC_DESTROY_SNAPS, /* 0x5a3b */
|
|
ZFS_IOC_POOL_REGUID, /* 0x5a3c */
|
|
ZFS_IOC_POOL_REOPEN, /* 0x5a3d */
|
|
ZFS_IOC_SEND_PROGRESS, /* 0x5a3e */
|
|
ZFS_IOC_LOG_HISTORY, /* 0x5a3f */
|
|
ZFS_IOC_SEND_NEW, /* 0x5a40 */
|
|
ZFS_IOC_SEND_SPACE, /* 0x5a41 */
|
|
ZFS_IOC_CLONE, /* 0x5a42 */
|
|
ZFS_IOC_BOOKMARK, /* 0x5a43 */
|
|
ZFS_IOC_GET_BOOKMARKS, /* 0x5a44 */
|
|
ZFS_IOC_DESTROY_BOOKMARKS, /* 0x5a45 */
|
|
ZFS_IOC_CHANNEL_PROGRAM, /* 0x5a46 */
|
|
ZFS_IOC_RECV_NEW, /* 0x5a47 */
|
|
ZFS_IOC_POOL_SYNC, /* 0x5a48 */
|
|
ZFS_IOC_LOAD_KEY, /* 0x5a49 */
|
|
ZFS_IOC_UNLOAD_KEY, /* 0x5a4a */
|
|
ZFS_IOC_CHANGE_KEY, /* 0x5a4b */
|
|
ZFS_IOC_REMAP, /* 0x5a4c */
|
|
ZFS_IOC_POOL_CHECKPOINT, /* 0x5a4d */
|
|
ZFS_IOC_POOL_DISCARD_CHECKPOINT, /* 0x5a4e */
|
|
|
|
/*
|
|
* Linux - 3/64 numbers reserved.
|
|
*/
|
|
ZFS_IOC_LINUX = ('Z' << 8) + 0x80,
|
|
ZFS_IOC_EVENTS_NEXT, /* 0x5a81 */
|
|
ZFS_IOC_EVENTS_CLEAR, /* 0x5a82 */
|
|
ZFS_IOC_EVENTS_SEEK, /* 0x5a83 */
|
|
|
|
/*
|
|
* FreeBSD - 1/64 numbers reserved.
|
|
*/
|
|
ZFS_IOC_FREEBSD = ('Z' << 8) + 0xC0,
|
|
|
|
ZFS_IOC_LAST
|
|
} zfs_ioc_t;
|
|
|
|
/*
|
|
* zvol ioctl to get dataset name
|
|
*/
|
|
#define BLKZNAME _IOR(0x12, 125, char[ZFS_MAX_DATASET_NAME_LEN])
|
|
|
|
/*
|
|
* ZFS-specific error codes used for returning descriptive errors
|
|
* to the userland through zfs ioctls.
|
|
*
|
|
* The enum implicitly includes all the error codes from errno.h.
|
|
* New code should use and extend this enum for errors that are
|
|
* not described precisely by generic errno codes.
|
|
*
|
|
* These numbers should not change over time. New entries should be appended.
|
|
*/
|
|
typedef enum {
|
|
ZFS_ERR_CHECKPOINT_EXISTS = 1024,
|
|
ZFS_ERR_DISCARDING_CHECKPOINT,
|
|
ZFS_ERR_NO_CHECKPOINT,
|
|
ZFS_ERR_DEVRM_IN_PROGRESS,
|
|
ZFS_ERR_VDEV_TOO_BIG,
|
|
ZFS_ERR_IOC_CMD_UNAVAIL,
|
|
ZFS_ERR_IOC_ARG_UNAVAIL,
|
|
ZFS_ERR_IOC_ARG_REQUIRED,
|
|
ZFS_ERR_IOC_ARG_BADTYPE,
|
|
} zfs_errno_t;
|
|
|
|
/*
|
|
* Internal SPA load state. Used by FMA diagnosis engine.
|
|
*/
|
|
typedef enum {
|
|
SPA_LOAD_NONE, /* no load in progress */
|
|
SPA_LOAD_OPEN, /* normal open */
|
|
SPA_LOAD_IMPORT, /* import in progress */
|
|
SPA_LOAD_TRYIMPORT, /* tryimport in progress */
|
|
SPA_LOAD_RECOVER, /* recovery requested */
|
|
SPA_LOAD_ERROR, /* load failed */
|
|
SPA_LOAD_CREATE /* creation in progress */
|
|
} spa_load_state_t;
|
|
|
|
/*
|
|
* Bookmark name values.
|
|
*/
|
|
#define ZPOOL_ERR_LIST "error list"
|
|
#define ZPOOL_ERR_DATASET "dataset"
|
|
#define ZPOOL_ERR_OBJECT "object"
|
|
|
|
#define HIS_MAX_RECORD_LEN (MAXPATHLEN + MAXPATHLEN + 1)
|
|
|
|
/*
|
|
* The following are names used in the nvlist describing
|
|
* the pool's history log.
|
|
*/
|
|
#define ZPOOL_HIST_RECORD "history record"
|
|
#define ZPOOL_HIST_TIME "history time"
|
|
#define ZPOOL_HIST_CMD "history command"
|
|
#define ZPOOL_HIST_WHO "history who"
|
|
#define ZPOOL_HIST_ZONE "history zone"
|
|
#define ZPOOL_HIST_HOST "history hostname"
|
|
#define ZPOOL_HIST_TXG "history txg"
|
|
#define ZPOOL_HIST_INT_EVENT "history internal event"
|
|
#define ZPOOL_HIST_INT_STR "history internal str"
|
|
#define ZPOOL_HIST_INT_NAME "internal_name"
|
|
#define ZPOOL_HIST_IOCTL "ioctl"
|
|
#define ZPOOL_HIST_INPUT_NVL "in_nvl"
|
|
#define ZPOOL_HIST_OUTPUT_NVL "out_nvl"
|
|
#define ZPOOL_HIST_DSNAME "dsname"
|
|
#define ZPOOL_HIST_DSID "dsid"
|
|
#define ZPOOL_HIST_ERRNO "errno"
|
|
|
|
/*
|
|
* Special nvlist name that will not have its args recorded in the pool's
|
|
* history log.
|
|
*/
|
|
#define ZPOOL_HIDDEN_ARGS "hidden_args"
|
|
|
|
/*
|
|
* Flags for ZFS_IOC_VDEV_SET_STATE
|
|
*/
|
|
#define ZFS_ONLINE_CHECKREMOVE 0x1
|
|
#define ZFS_ONLINE_UNSPARE 0x2
|
|
#define ZFS_ONLINE_FORCEFAULT 0x4
|
|
#define ZFS_ONLINE_EXPAND 0x8
|
|
#define ZFS_OFFLINE_TEMPORARY 0x1
|
|
|
|
/*
|
|
* Flags for ZFS_IOC_POOL_IMPORT
|
|
*/
|
|
#define ZFS_IMPORT_NORMAL 0x0
|
|
#define ZFS_IMPORT_VERBATIM 0x1
|
|
#define ZFS_IMPORT_ANY_HOST 0x2
|
|
#define ZFS_IMPORT_MISSING_LOG 0x4
|
|
#define ZFS_IMPORT_ONLY 0x8
|
|
#define ZFS_IMPORT_TEMP_NAME 0x10
|
|
#define ZFS_IMPORT_SKIP_MMP 0x20
|
|
#define ZFS_IMPORT_LOAD_KEYS 0x40
|
|
#define ZFS_IMPORT_CHECKPOINT 0x80
|
|
|
|
/*
|
|
* Channel program argument/return nvlist keys and defaults.
|
|
*/
|
|
#define ZCP_ARG_PROGRAM "program"
|
|
#define ZCP_ARG_ARGLIST "arg"
|
|
#define ZCP_ARG_SYNC "sync"
|
|
#define ZCP_ARG_INSTRLIMIT "instrlimit"
|
|
#define ZCP_ARG_MEMLIMIT "memlimit"
|
|
|
|
#define ZCP_ARG_CLIARGV "argv"
|
|
|
|
#define ZCP_RET_ERROR "error"
|
|
#define ZCP_RET_RETURN "return"
|
|
|
|
#define ZCP_DEFAULT_INSTRLIMIT (10 * 1000 * 1000)
|
|
#define ZCP_MAX_INSTRLIMIT (10 * ZCP_DEFAULT_INSTRLIMIT)
|
|
#define ZCP_DEFAULT_MEMLIMIT (10 * 1024 * 1024)
|
|
#define ZCP_MAX_MEMLIMIT (10 * ZCP_DEFAULT_MEMLIMIT)
|
|
|
|
/*
|
|
* Sysevent payload members. ZFS will generate the following sysevents with the
|
|
* given payloads:
|
|
*
|
|
* ESC_ZFS_RESILVER_START
|
|
* ESC_ZFS_RESILVER_END
|
|
* ESC_ZFS_POOL_DESTROY
|
|
* ESC_ZFS_POOL_REGUID
|
|
*
|
|
* ZFS_EV_POOL_NAME DATA_TYPE_STRING
|
|
* ZFS_EV_POOL_GUID DATA_TYPE_UINT64
|
|
*
|
|
* ESC_ZFS_VDEV_REMOVE
|
|
* ESC_ZFS_VDEV_CLEAR
|
|
* ESC_ZFS_VDEV_CHECK
|
|
*
|
|
* ZFS_EV_POOL_NAME DATA_TYPE_STRING
|
|
* ZFS_EV_POOL_GUID DATA_TYPE_UINT64
|
|
* ZFS_EV_VDEV_PATH DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_VDEV_GUID DATA_TYPE_UINT64
|
|
*
|
|
* ESC_ZFS_HISTORY_EVENT
|
|
*
|
|
* ZFS_EV_POOL_NAME DATA_TYPE_STRING
|
|
* ZFS_EV_POOL_GUID DATA_TYPE_UINT64
|
|
* ZFS_EV_HIST_TIME DATA_TYPE_UINT64 (optional)
|
|
* ZFS_EV_HIST_CMD DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_WHO DATA_TYPE_UINT64 (optional)
|
|
* ZFS_EV_HIST_ZONE DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_HOST DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_TXG DATA_TYPE_UINT64 (optional)
|
|
* ZFS_EV_HIST_INT_EVENT DATA_TYPE_UINT64 (optional)
|
|
* ZFS_EV_HIST_INT_STR DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_INT_NAME DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_IOCTL DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_DSNAME DATA_TYPE_STRING (optional)
|
|
* ZFS_EV_HIST_DSID DATA_TYPE_UINT64 (optional)
|
|
*
|
|
* The ZFS_EV_HIST_* members will correspond to the ZPOOL_HIST_* members in the
|
|
* history log nvlist. The keynames will be free of any spaces or other
|
|
* characters that could be potentially unexpected to consumers of the
|
|
* sysevents.
|
|
*/
|
|
#define ZFS_EV_POOL_NAME "pool_name"
|
|
#define ZFS_EV_POOL_GUID "pool_guid"
|
|
#define ZFS_EV_VDEV_PATH "vdev_path"
|
|
#define ZFS_EV_VDEV_GUID "vdev_guid"
|
|
#define ZFS_EV_HIST_TIME "history_time"
|
|
#define ZFS_EV_HIST_CMD "history_command"
|
|
#define ZFS_EV_HIST_WHO "history_who"
|
|
#define ZFS_EV_HIST_ZONE "history_zone"
|
|
#define ZFS_EV_HIST_HOST "history_hostname"
|
|
#define ZFS_EV_HIST_TXG "history_txg"
|
|
#define ZFS_EV_HIST_INT_EVENT "history_internal_event"
|
|
#define ZFS_EV_HIST_INT_STR "history_internal_str"
|
|
#define ZFS_EV_HIST_INT_NAME "history_internal_name"
|
|
#define ZFS_EV_HIST_IOCTL "history_ioctl"
|
|
#define ZFS_EV_HIST_DSNAME "history_dsname"
|
|
#define ZFS_EV_HIST_DSID "history_dsid"
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* _SYS_FS_ZFS_H */
|