mirror_zfs/module/zfs/zvol.c
Brian Behlendorf 8630650a8d Annotate KM_PUSHPAGE call paths with PF_NOFS
The txg_sync(), zfs_putpage(), zvol_write(), and zvol_discard()
call paths must only use KM_PUSHPAGE to avoid potential deadlocks
during direct reclaim.

This patch annotates these call paths so any accidental use of
KM_SLEEP will be quickly detected.   In the interest of stability
if debugging is disabled the offending allocation will have its
GFP flags automatically corrected.  When debugging is enabled
any misuse will be treated as a fatal error.

This patch is entirely for debugging.  We should be careful to
NOT become dependant on it fixing up the incorrect allocations.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-27 12:01:37 -07:00

1475 lines
35 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (C) 2008-2010 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Rewritten for Linux by Brian Behlendorf <behlendorf1@llnl.gov>.
* LLNL-CODE-403049.
*
* ZFS volume emulation driver.
*
* Makes a DMU object look like a volume of arbitrary size, up to 2^64 bytes.
* Volumes are accessed through the symbolic links named:
*
* /dev/<pool_name>/<dataset_name>
*
* Volumes are persistent through reboot and module load. No user command
* needs to be run before opening and using a device.
*/
#include <sys/dmu_traverse.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_prop.h>
#include <sys/zap.h>
#include <sys/zil_impl.h>
#include <sys/zio.h>
#include <sys/zfs_rlock.h>
#include <sys/zfs_znode.h>
#include <sys/zvol.h>
#include <linux/blkdev_compat.h>
unsigned int zvol_inhibit_dev = 0;
unsigned int zvol_major = ZVOL_MAJOR;
unsigned int zvol_threads = 32;
unsigned long zvol_max_discard_blocks = 16384;
static taskq_t *zvol_taskq;
static kmutex_t zvol_state_lock;
static list_t zvol_state_list;
static char *zvol_tag = "zvol_tag";
/*
* The in-core state of each volume.
*/
typedef struct zvol_state {
char zv_name[MAXNAMELEN]; /* name */
uint64_t zv_volsize; /* advertised space */
uint64_t zv_volblocksize;/* volume block size */
objset_t *zv_objset; /* objset handle */
uint32_t zv_flags; /* ZVOL_* flags */
uint32_t zv_open_count; /* open counts */
uint32_t zv_changed; /* disk changed */
zilog_t *zv_zilog; /* ZIL handle */
znode_t zv_znode; /* for range locking */
dmu_buf_t *zv_dbuf; /* bonus handle */
dev_t zv_dev; /* device id */
struct gendisk *zv_disk; /* generic disk */
struct request_queue *zv_queue; /* request queue */
spinlock_t zv_lock; /* request queue lock */
list_node_t zv_next; /* next zvol_state_t linkage */
} zvol_state_t;
#define ZVOL_RDONLY 0x1
/*
* Find the next available range of ZVOL_MINORS minor numbers. The
* zvol_state_list is kept in ascending minor order so we simply need
* to scan the list for the first gap in the sequence. This allows us
* to recycle minor number as devices are created and removed.
*/
static int
zvol_find_minor(unsigned *minor)
{
zvol_state_t *zv;
*minor = 0;
ASSERT(MUTEX_HELD(&zvol_state_lock));
for (zv = list_head(&zvol_state_list); zv != NULL;
zv = list_next(&zvol_state_list, zv), *minor += ZVOL_MINORS) {
if (MINOR(zv->zv_dev) != MINOR(*minor))
break;
}
/* All minors are in use */
if (*minor >= (1 << MINORBITS))
return ENXIO;
return 0;
}
/*
* Find a zvol_state_t given the full major+minor dev_t.
*/
static zvol_state_t *
zvol_find_by_dev(dev_t dev)
{
zvol_state_t *zv;
ASSERT(MUTEX_HELD(&zvol_state_lock));
for (zv = list_head(&zvol_state_list); zv != NULL;
zv = list_next(&zvol_state_list, zv)) {
if (zv->zv_dev == dev)
return zv;
}
return NULL;
}
/*
* Find a zvol_state_t given the name provided at zvol_alloc() time.
*/
static zvol_state_t *
zvol_find_by_name(const char *name)
{
zvol_state_t *zv;
ASSERT(MUTEX_HELD(&zvol_state_lock));
for (zv = list_head(&zvol_state_list); zv != NULL;
zv = list_next(&zvol_state_list, zv)) {
if (!strncmp(zv->zv_name, name, MAXNAMELEN))
return zv;
}
return NULL;
}
/*
* ZFS_IOC_CREATE callback handles dmu zvol and zap object creation.
*/
void
zvol_create_cb(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx)
{
zfs_creat_t *zct = arg;
nvlist_t *nvprops = zct->zct_props;
int error;
uint64_t volblocksize, volsize;
VERIFY(nvlist_lookup_uint64(nvprops,
zfs_prop_to_name(ZFS_PROP_VOLSIZE), &volsize) == 0);
if (nvlist_lookup_uint64(nvprops,
zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE), &volblocksize) != 0)
volblocksize = zfs_prop_default_numeric(ZFS_PROP_VOLBLOCKSIZE);
/*
* These properties must be removed from the list so the generic
* property setting step won't apply to them.
*/
VERIFY(nvlist_remove_all(nvprops,
zfs_prop_to_name(ZFS_PROP_VOLSIZE)) == 0);
(void) nvlist_remove_all(nvprops,
zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE));
error = dmu_object_claim(os, ZVOL_OBJ, DMU_OT_ZVOL, volblocksize,
DMU_OT_NONE, 0, tx);
ASSERT(error == 0);
error = zap_create_claim(os, ZVOL_ZAP_OBJ, DMU_OT_ZVOL_PROP,
DMU_OT_NONE, 0, tx);
ASSERT(error == 0);
error = zap_update(os, ZVOL_ZAP_OBJ, "size", 8, 1, &volsize, tx);
ASSERT(error == 0);
}
/*
* ZFS_IOC_OBJSET_STATS entry point.
*/
int
zvol_get_stats(objset_t *os, nvlist_t *nv)
{
int error;
dmu_object_info_t *doi;
uint64_t val;
error = zap_lookup(os, ZVOL_ZAP_OBJ, "size", 8, 1, &val);
if (error)
return (error);
dsl_prop_nvlist_add_uint64(nv, ZFS_PROP_VOLSIZE, val);
doi = kmem_alloc(sizeof(dmu_object_info_t), KM_SLEEP);
error = dmu_object_info(os, ZVOL_OBJ, doi);
if (error == 0) {
dsl_prop_nvlist_add_uint64(nv, ZFS_PROP_VOLBLOCKSIZE,
doi->doi_data_block_size);
}
kmem_free(doi, sizeof(dmu_object_info_t));
return (error);
}
/*
* Sanity check volume size.
*/
int
zvol_check_volsize(uint64_t volsize, uint64_t blocksize)
{
if (volsize == 0)
return (EINVAL);
if (volsize % blocksize != 0)
return (EINVAL);
#ifdef _ILP32
if (volsize - 1 > MAXOFFSET_T)
return (EOVERFLOW);
#endif
return (0);
}
/*
* Ensure the zap is flushed then inform the VFS of the capacity change.
*/
static int
zvol_update_volsize(zvol_state_t *zv, uint64_t volsize, objset_t *os)
{
struct block_device *bdev;
dmu_tx_t *tx;
int error;
ASSERT(MUTEX_HELD(&zvol_state_lock));
tx = dmu_tx_create(os);
dmu_tx_hold_zap(tx, ZVOL_ZAP_OBJ, TRUE, NULL);
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
return (error);
}
error = zap_update(os, ZVOL_ZAP_OBJ, "size", 8, 1,
&volsize, tx);
dmu_tx_commit(tx);
if (error)
return (error);
error = dmu_free_long_range(os,
ZVOL_OBJ, volsize, DMU_OBJECT_END);
if (error)
return (error);
bdev = bdget_disk(zv->zv_disk, 0);
if (!bdev)
return (EIO);
/*
* 2.6.28 API change
* Added check_disk_size_change() helper function.
*/
#ifdef HAVE_CHECK_DISK_SIZE_CHANGE
set_capacity(zv->zv_disk, volsize >> 9);
zv->zv_volsize = volsize;
check_disk_size_change(zv->zv_disk, bdev);
#else
zv->zv_volsize = volsize;
zv->zv_changed = 1;
(void) check_disk_change(bdev);
#endif /* HAVE_CHECK_DISK_SIZE_CHANGE */
bdput(bdev);
return (0);
}
/*
* Set ZFS_PROP_VOLSIZE set entry point.
*/
int
zvol_set_volsize(const char *name, uint64_t volsize)
{
zvol_state_t *zv;
dmu_object_info_t *doi;
objset_t *os = NULL;
uint64_t readonly;
int error;
mutex_enter(&zvol_state_lock);
zv = zvol_find_by_name(name);
if (zv == NULL) {
error = ENXIO;
goto out;
}
doi = kmem_alloc(sizeof(dmu_object_info_t), KM_SLEEP);
error = dmu_objset_hold(name, FTAG, &os);
if (error)
goto out_doi;
if ((error = dmu_object_info(os, ZVOL_OBJ, doi)) != 0 ||
(error = zvol_check_volsize(volsize,doi->doi_data_block_size)) != 0)
goto out_doi;
VERIFY(dsl_prop_get_integer(name, "readonly", &readonly, NULL) == 0);
if (readonly) {
error = EROFS;
goto out_doi;
}
if (get_disk_ro(zv->zv_disk) || (zv->zv_flags & ZVOL_RDONLY)) {
error = EROFS;
goto out_doi;
}
error = zvol_update_volsize(zv, volsize, os);
out_doi:
kmem_free(doi, sizeof(dmu_object_info_t));
out:
if (os)
dmu_objset_rele(os, FTAG);
mutex_exit(&zvol_state_lock);
return (error);
}
/*
* Sanity check volume block size.
*/
int
zvol_check_volblocksize(uint64_t volblocksize)
{
if (volblocksize < SPA_MINBLOCKSIZE ||
volblocksize > SPA_MAXBLOCKSIZE ||
!ISP2(volblocksize))
return (EDOM);
return (0);
}
/*
* Set ZFS_PROP_VOLBLOCKSIZE set entry point.
*/
int
zvol_set_volblocksize(const char *name, uint64_t volblocksize)
{
zvol_state_t *zv;
dmu_tx_t *tx;
int error;
mutex_enter(&zvol_state_lock);
zv = zvol_find_by_name(name);
if (zv == NULL) {
error = ENXIO;
goto out;
}
if (get_disk_ro(zv->zv_disk) || (zv->zv_flags & ZVOL_RDONLY)) {
error = EROFS;
goto out;
}
tx = dmu_tx_create(zv->zv_objset);
dmu_tx_hold_bonus(tx, ZVOL_OBJ);
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
} else {
error = dmu_object_set_blocksize(zv->zv_objset, ZVOL_OBJ,
volblocksize, 0, tx);
if (error == ENOTSUP)
error = EBUSY;
dmu_tx_commit(tx);
if (error == 0)
zv->zv_volblocksize = volblocksize;
}
out:
mutex_exit(&zvol_state_lock);
return (error);
}
/*
* Replay a TX_WRITE ZIL transaction that didn't get committed
* after a system failure
*/
static int
zvol_replay_write(zvol_state_t *zv, lr_write_t *lr, boolean_t byteswap)
{
objset_t *os = zv->zv_objset;
char *data = (char *)(lr + 1); /* data follows lr_write_t */
uint64_t off = lr->lr_offset;
uint64_t len = lr->lr_length;
dmu_tx_t *tx;
int error;
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
tx = dmu_tx_create(os);
dmu_tx_hold_write(tx, ZVOL_OBJ, off, len);
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
} else {
dmu_write(os, ZVOL_OBJ, off, len, data, tx);
dmu_tx_commit(tx);
}
return (error);
}
static int
zvol_replay_err(zvol_state_t *zv, lr_t *lr, boolean_t byteswap)
{
return (ENOTSUP);
}
/*
* Callback vectors for replaying records.
* Only TX_WRITE is needed for zvol.
*/
zil_replay_func_t *zvol_replay_vector[TX_MAX_TYPE] = {
(zil_replay_func_t *)zvol_replay_err, /* no such transaction type */
(zil_replay_func_t *)zvol_replay_err, /* TX_CREATE */
(zil_replay_func_t *)zvol_replay_err, /* TX_MKDIR */
(zil_replay_func_t *)zvol_replay_err, /* TX_MKXATTR */
(zil_replay_func_t *)zvol_replay_err, /* TX_SYMLINK */
(zil_replay_func_t *)zvol_replay_err, /* TX_REMOVE */
(zil_replay_func_t *)zvol_replay_err, /* TX_RMDIR */
(zil_replay_func_t *)zvol_replay_err, /* TX_LINK */
(zil_replay_func_t *)zvol_replay_err, /* TX_RENAME */
(zil_replay_func_t *)zvol_replay_write, /* TX_WRITE */
(zil_replay_func_t *)zvol_replay_err, /* TX_TRUNCATE */
(zil_replay_func_t *)zvol_replay_err, /* TX_SETATTR */
(zil_replay_func_t *)zvol_replay_err, /* TX_ACL */
};
/*
* zvol_log_write() handles synchronous writes using TX_WRITE ZIL transactions.
*
* We store data in the log buffers if it's small enough.
* Otherwise we will later flush the data out via dmu_sync().
*/
ssize_t zvol_immediate_write_sz = 32768;
static void
zvol_log_write(zvol_state_t *zv, dmu_tx_t *tx,
uint64_t offset, uint64_t size, int sync)
{
uint32_t blocksize = zv->zv_volblocksize;
zilog_t *zilog = zv->zv_zilog;
boolean_t slogging;
ssize_t immediate_write_sz;
if (zil_replaying(zilog, tx))
return;
immediate_write_sz = (zilog->zl_logbias == ZFS_LOGBIAS_THROUGHPUT)
? 0 : zvol_immediate_write_sz;
slogging = spa_has_slogs(zilog->zl_spa) &&
(zilog->zl_logbias == ZFS_LOGBIAS_LATENCY);
while (size) {
itx_t *itx;
lr_write_t *lr;
ssize_t len;
itx_wr_state_t write_state;
/*
* Unlike zfs_log_write() we can be called with
* up to DMU_MAX_ACCESS/2 (5MB) writes.
*/
if (blocksize > immediate_write_sz && !slogging &&
size >= blocksize && offset % blocksize == 0) {
write_state = WR_INDIRECT; /* uses dmu_sync */
len = blocksize;
} else if (sync) {
write_state = WR_COPIED;
len = MIN(ZIL_MAX_LOG_DATA, size);
} else {
write_state = WR_NEED_COPY;
len = MIN(ZIL_MAX_LOG_DATA, size);
}
itx = zil_itx_create(TX_WRITE, sizeof (*lr) +
(write_state == WR_COPIED ? len : 0));
lr = (lr_write_t *)&itx->itx_lr;
if (write_state == WR_COPIED && dmu_read(zv->zv_objset,
ZVOL_OBJ, offset, len, lr+1, DMU_READ_NO_PREFETCH) != 0) {
zil_itx_destroy(itx);
itx = zil_itx_create(TX_WRITE, sizeof (*lr));
lr = (lr_write_t *)&itx->itx_lr;
write_state = WR_NEED_COPY;
}
itx->itx_wr_state = write_state;
if (write_state == WR_NEED_COPY)
itx->itx_sod += len;
lr->lr_foid = ZVOL_OBJ;
lr->lr_offset = offset;
lr->lr_length = len;
lr->lr_blkoff = 0;
BP_ZERO(&lr->lr_blkptr);
itx->itx_private = zv;
itx->itx_sync = sync;
(void) zil_itx_assign(zilog, itx, tx);
offset += len;
size -= len;
}
}
/*
* Common write path running under the zvol taskq context. This function
* is responsible for copying the request structure data in to the DMU and
* signaling the request queue with the result of the copy.
*/
static void
zvol_write(void *arg)
{
struct request *req = (struct request *)arg;
struct request_queue *q = req->q;
zvol_state_t *zv = q->queuedata;
uint64_t offset = blk_rq_pos(req) << 9;
uint64_t size = blk_rq_bytes(req);
int error = 0;
dmu_tx_t *tx;
rl_t *rl;
/*
* Annotate this call path with a flag that indicates that it is
* unsafe to use KM_SLEEP during memory allocations due to the
* potential for a deadlock. KM_PUSHPAGE should be used instead.
*/
ASSERT(!(current->flags & PF_NOFS));
current->flags |= PF_NOFS;
if (req->cmd_flags & VDEV_REQ_FLUSH)
zil_commit(zv->zv_zilog, ZVOL_OBJ);
/*
* Some requests are just for flush and nothing else.
*/
if (size == 0) {
blk_end_request(req, 0, size);
goto out;
}
rl = zfs_range_lock(&zv->zv_znode, offset, size, RL_WRITER);
tx = dmu_tx_create(zv->zv_objset);
dmu_tx_hold_write(tx, ZVOL_OBJ, offset, size);
/* This will only fail for ENOSPC */
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
zfs_range_unlock(rl);
blk_end_request(req, -error, size);
goto out;
}
error = dmu_write_req(zv->zv_objset, ZVOL_OBJ, req, tx);
if (error == 0)
zvol_log_write(zv, tx, offset, size,
req->cmd_flags & VDEV_REQ_FUA);
dmu_tx_commit(tx);
zfs_range_unlock(rl);
if ((req->cmd_flags & VDEV_REQ_FUA) ||
zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS)
zil_commit(zv->zv_zilog, ZVOL_OBJ);
blk_end_request(req, -error, size);
out:
current->flags &= ~PF_NOFS;
}
#ifdef HAVE_BLK_QUEUE_DISCARD
static void
zvol_discard(void *arg)
{
struct request *req = (struct request *)arg;
struct request_queue *q = req->q;
zvol_state_t *zv = q->queuedata;
uint64_t offset = blk_rq_pos(req) << 9;
uint64_t size = blk_rq_bytes(req);
int error;
rl_t *rl;
/*
* Annotate this call path with a flag that indicates that it is
* unsafe to use KM_SLEEP during memory allocations due to the
* potential for a deadlock. KM_PUSHPAGE should be used instead.
*/
ASSERT(!(current->flags & PF_NOFS));
current->flags |= PF_NOFS;
if (offset + size > zv->zv_volsize) {
blk_end_request(req, -EIO, size);
goto out;
}
if (size == 0) {
blk_end_request(req, 0, size);
goto out;
}
rl = zfs_range_lock(&zv->zv_znode, offset, size, RL_WRITER);
error = dmu_free_long_range(zv->zv_objset, ZVOL_OBJ, offset, size);
/*
* TODO: maybe we should add the operation to the log.
*/
zfs_range_unlock(rl);
blk_end_request(req, -error, size);
out:
current->flags &= ~PF_NOFS;
}
#endif /* HAVE_BLK_QUEUE_DISCARD */
/*
* Common read path running under the zvol taskq context. This function
* is responsible for copying the requested data out of the DMU and in to
* a linux request structure. It then must signal the request queue with
* an error code describing the result of the copy.
*/
static void
zvol_read(void *arg)
{
struct request *req = (struct request *)arg;
struct request_queue *q = req->q;
zvol_state_t *zv = q->queuedata;
uint64_t offset = blk_rq_pos(req) << 9;
uint64_t size = blk_rq_bytes(req);
int error;
rl_t *rl;
if (size == 0) {
blk_end_request(req, 0, size);
return;
}
rl = zfs_range_lock(&zv->zv_znode, offset, size, RL_READER);
error = dmu_read_req(zv->zv_objset, ZVOL_OBJ, req);
zfs_range_unlock(rl);
/* convert checksum errors into IO errors */
if (error == ECKSUM)
error = EIO;
blk_end_request(req, -error, size);
}
/*
* Request will be added back to the request queue and retried if
* it cannot be immediately dispatched to the taskq for handling
*/
static inline void
zvol_dispatch(task_func_t func, struct request *req)
{
if (!taskq_dispatch(zvol_taskq, func, (void *)req, TQ_NOSLEEP))
blk_requeue_request(req->q, req);
}
/*
* Common request path. Rather than registering a custom make_request()
* function we use the generic Linux version. This is done because it allows
* us to easily merge read requests which would otherwise we performed
* synchronously by the DMU. This is less critical in write case where the
* DMU will perform the correct merging within a transaction group. Using
* the generic make_request() also let's use leverage the fact that the
* elevator with ensure correct ordering in regards to barrior IOs. On
* the downside it means that in the write case we end up doing request
* merging twice once in the elevator and once in the DMU.
*
* The request handler is called under a spin lock so all the real work
* is handed off to be done in the context of the zvol taskq. This function
* simply performs basic request sanity checking and hands off the request.
*/
static void
zvol_request(struct request_queue *q)
{
zvol_state_t *zv = q->queuedata;
struct request *req;
unsigned int size;
while ((req = blk_fetch_request(q)) != NULL) {
size = blk_rq_bytes(req);
if (size != 0 && blk_rq_pos(req) + blk_rq_sectors(req) >
get_capacity(zv->zv_disk)) {
printk(KERN_INFO
"%s: bad access: block=%llu, count=%lu\n",
req->rq_disk->disk_name,
(long long unsigned)blk_rq_pos(req),
(long unsigned)blk_rq_sectors(req));
__blk_end_request(req, -EIO, size);
continue;
}
if (!blk_fs_request(req)) {
printk(KERN_INFO "%s: non-fs cmd\n",
req->rq_disk->disk_name);
__blk_end_request(req, -EIO, size);
continue;
}
switch (rq_data_dir(req)) {
case READ:
zvol_dispatch(zvol_read, req);
break;
case WRITE:
if (unlikely(get_disk_ro(zv->zv_disk)) ||
unlikely(zv->zv_flags & ZVOL_RDONLY)) {
__blk_end_request(req, -EROFS, size);
break;
}
#ifdef HAVE_BLK_QUEUE_DISCARD
if (req->cmd_flags & VDEV_REQ_DISCARD) {
zvol_dispatch(zvol_discard, req);
break;
}
#endif /* HAVE_BLK_QUEUE_DISCARD */
zvol_dispatch(zvol_write, req);
break;
default:
printk(KERN_INFO "%s: unknown cmd: %d\n",
req->rq_disk->disk_name, (int)rq_data_dir(req));
__blk_end_request(req, -EIO, size);
break;
}
}
}
static void
zvol_get_done(zgd_t *zgd, int error)
{
if (zgd->zgd_db)
dmu_buf_rele(zgd->zgd_db, zgd);
zfs_range_unlock(zgd->zgd_rl);
if (error == 0 && zgd->zgd_bp)
zil_add_block(zgd->zgd_zilog, zgd->zgd_bp);
kmem_free(zgd, sizeof (zgd_t));
}
/*
* Get data to generate a TX_WRITE intent log record.
*/
static int
zvol_get_data(void *arg, lr_write_t *lr, char *buf, zio_t *zio)
{
zvol_state_t *zv = arg;
objset_t *os = zv->zv_objset;
uint64_t offset = lr->lr_offset;
uint64_t size = lr->lr_length;
dmu_buf_t *db;
zgd_t *zgd;
int error;
ASSERT(zio != NULL);
ASSERT(size != 0);
zgd = (zgd_t *)kmem_zalloc(sizeof (zgd_t), KM_SLEEP);
zgd->zgd_zilog = zv->zv_zilog;
zgd->zgd_rl = zfs_range_lock(&zv->zv_znode, offset, size, RL_READER);
/*
* Write records come in two flavors: immediate and indirect.
* For small writes it's cheaper to store the data with the
* log record (immediate); for large writes it's cheaper to
* sync the data and get a pointer to it (indirect) so that
* we don't have to write the data twice.
*/
if (buf != NULL) { /* immediate write */
error = dmu_read(os, ZVOL_OBJ, offset, size, buf,
DMU_READ_NO_PREFETCH);
} else {
size = zv->zv_volblocksize;
offset = P2ALIGN_TYPED(offset, size, uint64_t);
error = dmu_buf_hold(os, ZVOL_OBJ, offset, zgd, &db,
DMU_READ_NO_PREFETCH);
if (error == 0) {
zgd->zgd_db = db;
zgd->zgd_bp = &lr->lr_blkptr;
ASSERT(db != NULL);
ASSERT(db->db_offset == offset);
ASSERT(db->db_size == size);
error = dmu_sync(zio, lr->lr_common.lrc_txg,
zvol_get_done, zgd);
if (error == 0)
return (0);
}
}
zvol_get_done(zgd, error);
return (error);
}
/*
* The zvol_state_t's are inserted in increasing MINOR(dev_t) order.
*/
static void
zvol_insert(zvol_state_t *zv_insert)
{
zvol_state_t *zv = NULL;
ASSERT(MUTEX_HELD(&zvol_state_lock));
ASSERT3U(MINOR(zv_insert->zv_dev) & ZVOL_MINOR_MASK, ==, 0);
for (zv = list_head(&zvol_state_list); zv != NULL;
zv = list_next(&zvol_state_list, zv)) {
if (MINOR(zv->zv_dev) > MINOR(zv_insert->zv_dev))
break;
}
list_insert_before(&zvol_state_list, zv, zv_insert);
}
/*
* Simply remove the zvol from to list of zvols.
*/
static void
zvol_remove(zvol_state_t *zv_remove)
{
ASSERT(MUTEX_HELD(&zvol_state_lock));
list_remove(&zvol_state_list, zv_remove);
}
static int
zvol_first_open(zvol_state_t *zv)
{
objset_t *os;
uint64_t volsize;
int error;
uint64_t ro;
/* lie and say we're read-only */
error = dmu_objset_own(zv->zv_name, DMU_OST_ZVOL, 1, zvol_tag, &os);
if (error)
return (-error);
error = zap_lookup(os, ZVOL_ZAP_OBJ, "size", 8, 1, &volsize);
if (error) {
dmu_objset_disown(os, zvol_tag);
return (-error);
}
zv->zv_objset = os;
error = dmu_bonus_hold(os, ZVOL_OBJ, zvol_tag, &zv->zv_dbuf);
if (error) {
dmu_objset_disown(os, zvol_tag);
return (-error);
}
set_capacity(zv->zv_disk, volsize >> 9);
zv->zv_volsize = volsize;
zv->zv_zilog = zil_open(os, zvol_get_data);
VERIFY(dsl_prop_get_integer(zv->zv_name, "readonly", &ro, NULL) == 0);
if (ro || dmu_objset_is_snapshot(os)) {
set_disk_ro(zv->zv_disk, 1);
zv->zv_flags |= ZVOL_RDONLY;
} else {
set_disk_ro(zv->zv_disk, 0);
zv->zv_flags &= ~ZVOL_RDONLY;
}
return (-error);
}
static void
zvol_last_close(zvol_state_t *zv)
{
zil_close(zv->zv_zilog);
zv->zv_zilog = NULL;
dmu_buf_rele(zv->zv_dbuf, zvol_tag);
zv->zv_dbuf = NULL;
dmu_objset_disown(zv->zv_objset, zvol_tag);
zv->zv_objset = NULL;
}
static int
zvol_open(struct block_device *bdev, fmode_t flag)
{
zvol_state_t *zv = bdev->bd_disk->private_data;
int error = 0, drop_mutex = 0;
/*
* If the caller is already holding the mutex do not take it
* again, this will happen as part of zvol_create_minor().
* Once add_disk() is called the device is live and the kernel
* will attempt to open it to read the partition information.
*/
if (!mutex_owned(&zvol_state_lock)) {
mutex_enter(&zvol_state_lock);
drop_mutex = 1;
}
ASSERT3P(zv, !=, NULL);
if (zv->zv_open_count == 0) {
error = zvol_first_open(zv);
if (error)
goto out_mutex;
}
if ((flag & FMODE_WRITE) &&
(get_disk_ro(zv->zv_disk) || (zv->zv_flags & ZVOL_RDONLY))) {
error = -EROFS;
goto out_open_count;
}
zv->zv_open_count++;
out_open_count:
if (zv->zv_open_count == 0)
zvol_last_close(zv);
out_mutex:
if (drop_mutex)
mutex_exit(&zvol_state_lock);
check_disk_change(bdev);
return (error);
}
static int
zvol_release(struct gendisk *disk, fmode_t mode)
{
zvol_state_t *zv = disk->private_data;
int drop_mutex = 0;
if (!mutex_owned(&zvol_state_lock)) {
mutex_enter(&zvol_state_lock);
drop_mutex = 1;
}
ASSERT3P(zv, !=, NULL);
ASSERT3U(zv->zv_open_count, >, 0);
zv->zv_open_count--;
if (zv->zv_open_count == 0)
zvol_last_close(zv);
if (drop_mutex)
mutex_exit(&zvol_state_lock);
return (0);
}
static int
zvol_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
zvol_state_t *zv = bdev->bd_disk->private_data;
int error = 0;
if (zv == NULL)
return (-ENXIO);
switch (cmd) {
case BLKFLSBUF:
zil_commit(zv->zv_zilog, ZVOL_OBJ);
break;
case BLKZNAME:
error = copy_to_user((void *)arg, zv->zv_name, MAXNAMELEN);
break;
default:
error = -ENOTTY;
break;
}
return (error);
}
#ifdef CONFIG_COMPAT
static int
zvol_compat_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
return zvol_ioctl(bdev, mode, cmd, arg);
}
#else
#define zvol_compat_ioctl NULL
#endif
static int zvol_media_changed(struct gendisk *disk)
{
zvol_state_t *zv = disk->private_data;
return zv->zv_changed;
}
static int zvol_revalidate_disk(struct gendisk *disk)
{
zvol_state_t *zv = disk->private_data;
zv->zv_changed = 0;
set_capacity(zv->zv_disk, zv->zv_volsize >> 9);
return 0;
}
/*
* Provide a simple virtual geometry for legacy compatibility. For devices
* smaller than 1 MiB a small head and sector count is used to allow very
* tiny devices. For devices over 1 Mib a standard head and sector count
* is used to keep the cylinders count reasonable.
*/
static int
zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
zvol_state_t *zv = bdev->bd_disk->private_data;
sector_t sectors = get_capacity(zv->zv_disk);
if (sectors > 2048) {
geo->heads = 16;
geo->sectors = 63;
} else {
geo->heads = 2;
geo->sectors = 4;
}
geo->start = 0;
geo->cylinders = sectors / (geo->heads * geo->sectors);
return 0;
}
static struct kobject *
zvol_probe(dev_t dev, int *part, void *arg)
{
zvol_state_t *zv;
struct kobject *kobj;
mutex_enter(&zvol_state_lock);
zv = zvol_find_by_dev(dev);
kobj = zv ? get_disk(zv->zv_disk) : ERR_PTR(-ENOENT);
mutex_exit(&zvol_state_lock);
return kobj;
}
#ifdef HAVE_BDEV_BLOCK_DEVICE_OPERATIONS
static struct block_device_operations zvol_ops = {
.open = zvol_open,
.release = zvol_release,
.ioctl = zvol_ioctl,
.compat_ioctl = zvol_compat_ioctl,
.media_changed = zvol_media_changed,
.revalidate_disk = zvol_revalidate_disk,
.getgeo = zvol_getgeo,
.owner = THIS_MODULE,
};
#else /* HAVE_BDEV_BLOCK_DEVICE_OPERATIONS */
static int
zvol_open_by_inode(struct inode *inode, struct file *file)
{
return zvol_open(inode->i_bdev, file->f_mode);
}
static int
zvol_release_by_inode(struct inode *inode, struct file *file)
{
return zvol_release(inode->i_bdev->bd_disk, file->f_mode);
}
static int
zvol_ioctl_by_inode(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
if (file == NULL || inode == NULL)
return -EINVAL;
return zvol_ioctl(inode->i_bdev, file->f_mode, cmd, arg);
}
# ifdef CONFIG_COMPAT
static long
zvol_compat_ioctl_by_inode(struct file *file,
unsigned int cmd, unsigned long arg)
{
if (file == NULL)
return -EINVAL;
return zvol_compat_ioctl(file->f_dentry->d_inode->i_bdev,
file->f_mode, cmd, arg);
}
# else
# define zvol_compat_ioctl_by_inode NULL
# endif
static struct block_device_operations zvol_ops = {
.open = zvol_open_by_inode,
.release = zvol_release_by_inode,
.ioctl = zvol_ioctl_by_inode,
.compat_ioctl = zvol_compat_ioctl_by_inode,
.media_changed = zvol_media_changed,
.revalidate_disk = zvol_revalidate_disk,
.getgeo = zvol_getgeo,
.owner = THIS_MODULE,
};
#endif /* HAVE_BDEV_BLOCK_DEVICE_OPERATIONS */
/*
* Allocate memory for a new zvol_state_t and setup the required
* request queue and generic disk structures for the block device.
*/
static zvol_state_t *
zvol_alloc(dev_t dev, const char *name)
{
zvol_state_t *zv;
zv = kmem_zalloc(sizeof (zvol_state_t), KM_SLEEP);
if (zv == NULL)
goto out;
zv->zv_queue = blk_init_queue(zvol_request, &zv->zv_lock);
if (zv->zv_queue == NULL)
goto out_kmem;
#ifdef HAVE_BLK_QUEUE_FLUSH
blk_queue_flush(zv->zv_queue, VDEV_REQ_FLUSH | VDEV_REQ_FUA);
#else
blk_queue_ordered(zv->zv_queue, QUEUE_ORDERED_DRAIN, NULL);
#endif /* HAVE_BLK_QUEUE_FLUSH */
zv->zv_disk = alloc_disk(ZVOL_MINORS);
if (zv->zv_disk == NULL)
goto out_queue;
zv->zv_queue->queuedata = zv;
zv->zv_dev = dev;
zv->zv_open_count = 0;
strlcpy(zv->zv_name, name, MAXNAMELEN);
mutex_init(&zv->zv_znode.z_range_lock, NULL, MUTEX_DEFAULT, NULL);
avl_create(&zv->zv_znode.z_range_avl, zfs_range_compare,
sizeof (rl_t), offsetof(rl_t, r_node));
zv->zv_znode.z_is_zvol = TRUE;
spin_lock_init(&zv->zv_lock);
list_link_init(&zv->zv_next);
zv->zv_disk->major = zvol_major;
zv->zv_disk->first_minor = (dev & MINORMASK);
zv->zv_disk->fops = &zvol_ops;
zv->zv_disk->private_data = zv;
zv->zv_disk->queue = zv->zv_queue;
snprintf(zv->zv_disk->disk_name, DISK_NAME_LEN, "%s%d",
ZVOL_DEV_NAME, (dev & MINORMASK));
return zv;
out_queue:
blk_cleanup_queue(zv->zv_queue);
out_kmem:
kmem_free(zv, sizeof (zvol_state_t));
out:
return NULL;
}
/*
* Cleanup then free a zvol_state_t which was created by zvol_alloc().
*/
static void
zvol_free(zvol_state_t *zv)
{
avl_destroy(&zv->zv_znode.z_range_avl);
mutex_destroy(&zv->zv_znode.z_range_lock);
del_gendisk(zv->zv_disk);
blk_cleanup_queue(zv->zv_queue);
put_disk(zv->zv_disk);
kmem_free(zv, sizeof (zvol_state_t));
}
static int
__zvol_create_minor(const char *name)
{
zvol_state_t *zv;
objset_t *os;
dmu_object_info_t *doi;
uint64_t volsize;
unsigned minor = 0;
int error = 0;
ASSERT(MUTEX_HELD(&zvol_state_lock));
zv = zvol_find_by_name(name);
if (zv) {
error = EEXIST;
goto out;
}
doi = kmem_alloc(sizeof(dmu_object_info_t), KM_SLEEP);
error = dmu_objset_own(name, DMU_OST_ZVOL, B_TRUE, zvol_tag, &os);
if (error)
goto out_doi;
error = dmu_object_info(os, ZVOL_OBJ, doi);
if (error)
goto out_dmu_objset_disown;
error = zap_lookup(os, ZVOL_ZAP_OBJ, "size", 8, 1, &volsize);
if (error)
goto out_dmu_objset_disown;
error = zvol_find_minor(&minor);
if (error)
goto out_dmu_objset_disown;
zv = zvol_alloc(MKDEV(zvol_major, minor), name);
if (zv == NULL) {
error = EAGAIN;
goto out_dmu_objset_disown;
}
if (dmu_objset_is_snapshot(os))
zv->zv_flags |= ZVOL_RDONLY;
zv->zv_volblocksize = doi->doi_data_block_size;
zv->zv_volsize = volsize;
zv->zv_objset = os;
set_capacity(zv->zv_disk, zv->zv_volsize >> 9);
blk_queue_max_hw_sectors(zv->zv_queue, UINT_MAX);
blk_queue_max_segments(zv->zv_queue, UINT16_MAX);
blk_queue_max_segment_size(zv->zv_queue, UINT_MAX);
blk_queue_physical_block_size(zv->zv_queue, zv->zv_volblocksize);
blk_queue_io_opt(zv->zv_queue, zv->zv_volblocksize);
#ifdef HAVE_BLK_QUEUE_DISCARD
blk_queue_max_discard_sectors(zv->zv_queue,
(zvol_max_discard_blocks * zv->zv_volblocksize) >> 9);
blk_queue_discard_granularity(zv->zv_queue, zv->zv_volblocksize);
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, zv->zv_queue);
#endif
#ifdef HAVE_BLK_QUEUE_NONROT
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, zv->zv_queue);
#endif
if (zil_replay_disable)
zil_destroy(dmu_objset_zil(os), B_FALSE);
else
zil_replay(os, zv, zvol_replay_vector);
out_dmu_objset_disown:
dmu_objset_disown(os, zvol_tag);
zv->zv_objset = NULL;
out_doi:
kmem_free(doi, sizeof(dmu_object_info_t));
out:
if (error == 0) {
zvol_insert(zv);
add_disk(zv->zv_disk);
}
return (error);
}
/*
* Create a block device minor node and setup the linkage between it
* and the specified volume. Once this function returns the block
* device is live and ready for use.
*/
int
zvol_create_minor(const char *name)
{
int error;
mutex_enter(&zvol_state_lock);
error = __zvol_create_minor(name);
mutex_exit(&zvol_state_lock);
return (error);
}
static int
__zvol_remove_minor(const char *name)
{
zvol_state_t *zv;
ASSERT(MUTEX_HELD(&zvol_state_lock));
zv = zvol_find_by_name(name);
if (zv == NULL)
return (ENXIO);
if (zv->zv_open_count > 0)
return (EBUSY);
zvol_remove(zv);
zvol_free(zv);
return (0);
}
/*
* Remove a block device minor node for the specified volume.
*/
int
zvol_remove_minor(const char *name)
{
int error;
mutex_enter(&zvol_state_lock);
error = __zvol_remove_minor(name);
mutex_exit(&zvol_state_lock);
return (error);
}
static int
zvol_create_minors_cb(spa_t *spa, uint64_t dsobj,
const char *dsname, void *arg)
{
if (strchr(dsname, '/') == NULL)
return 0;
(void) __zvol_create_minor(dsname);
return (0);
}
/*
* Create minors for specified pool, if pool is NULL create minors
* for all available pools.
*/
int
zvol_create_minors(const char *pool)
{
spa_t *spa = NULL;
int error = 0;
if (zvol_inhibit_dev)
return (0);
mutex_enter(&zvol_state_lock);
if (pool) {
error = dmu_objset_find_spa(NULL, pool, zvol_create_minors_cb,
NULL, DS_FIND_CHILDREN | DS_FIND_SNAPSHOTS);
} else {
mutex_enter(&spa_namespace_lock);
while ((spa = spa_next(spa)) != NULL) {
error = dmu_objset_find_spa(NULL,
spa_name(spa), zvol_create_minors_cb, NULL,
DS_FIND_CHILDREN | DS_FIND_SNAPSHOTS);
if (error)
break;
}
mutex_exit(&spa_namespace_lock);
}
mutex_exit(&zvol_state_lock);
return error;
}
/*
* Remove minors for specified pool, if pool is NULL remove all minors.
*/
void
zvol_remove_minors(const char *pool)
{
zvol_state_t *zv, *zv_next;
char *str;
if (zvol_inhibit_dev)
return;
str = kmem_zalloc(MAXNAMELEN, KM_SLEEP);
if (pool) {
(void) strncpy(str, pool, strlen(pool));
(void) strcat(str, "/");
}
mutex_enter(&zvol_state_lock);
for (zv = list_head(&zvol_state_list); zv != NULL; zv = zv_next) {
zv_next = list_next(&zvol_state_list, zv);
if (pool == NULL || !strncmp(str, zv->zv_name, strlen(str))) {
zvol_remove(zv);
zvol_free(zv);
}
}
mutex_exit(&zvol_state_lock);
kmem_free(str, MAXNAMELEN);
}
int
zvol_init(void)
{
int error;
zvol_taskq = taskq_create(ZVOL_DRIVER, zvol_threads, maxclsyspri,
zvol_threads, INT_MAX, TASKQ_PREPOPULATE);
if (zvol_taskq == NULL) {
printk(KERN_INFO "ZFS: taskq_create() failed\n");
return (-ENOMEM);
}
error = register_blkdev(zvol_major, ZVOL_DRIVER);
if (error) {
printk(KERN_INFO "ZFS: register_blkdev() failed %d\n", error);
taskq_destroy(zvol_taskq);
return (error);
}
blk_register_region(MKDEV(zvol_major, 0), 1UL << MINORBITS,
THIS_MODULE, zvol_probe, NULL, NULL);
mutex_init(&zvol_state_lock, NULL, MUTEX_DEFAULT, NULL);
list_create(&zvol_state_list, sizeof (zvol_state_t),
offsetof(zvol_state_t, zv_next));
(void) zvol_create_minors(NULL);
return (0);
}
void
zvol_fini(void)
{
zvol_remove_minors(NULL);
blk_unregister_region(MKDEV(zvol_major, 0), 1UL << MINORBITS);
unregister_blkdev(zvol_major, ZVOL_DRIVER);
taskq_destroy(zvol_taskq);
mutex_destroy(&zvol_state_lock);
list_destroy(&zvol_state_list);
}
module_param(zvol_inhibit_dev, uint, 0644);
MODULE_PARM_DESC(zvol_inhibit_dev, "Do not create zvol device nodes");
module_param(zvol_major, uint, 0444);
MODULE_PARM_DESC(zvol_major, "Major number for zvol device");
module_param(zvol_threads, uint, 0444);
MODULE_PARM_DESC(zvol_threads, "Number of threads for zvol device");
module_param(zvol_max_discard_blocks, ulong, 0444);
MODULE_PARM_DESC(zvol_max_discard_blocks, "Max number of blocks to discard at once");