mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-17 10:01:01 +03:00
a1d477c24c
OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
620 lines
22 KiB
C
620 lines
22 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2012, 2017 by Delphix. All rights reserved.
|
|
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
|
|
*/
|
|
|
|
#ifndef _SYS_DNODE_H
|
|
#define _SYS_DNODE_H
|
|
|
|
#include <sys/zfs_context.h>
|
|
#include <sys/avl.h>
|
|
#include <sys/spa.h>
|
|
#include <sys/txg.h>
|
|
#include <sys/zio.h>
|
|
#include <sys/refcount.h>
|
|
#include <sys/dmu_zfetch.h>
|
|
#include <sys/zrlock.h>
|
|
#include <sys/multilist.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*
|
|
* dnode_hold() flags.
|
|
*/
|
|
#define DNODE_MUST_BE_ALLOCATED 1
|
|
#define DNODE_MUST_BE_FREE 2
|
|
|
|
/*
|
|
* dnode_next_offset() flags.
|
|
*/
|
|
#define DNODE_FIND_HOLE 1
|
|
#define DNODE_FIND_BACKWARDS 2
|
|
#define DNODE_FIND_HAVELOCK 4
|
|
|
|
/*
|
|
* Fixed constants.
|
|
*/
|
|
#define DNODE_SHIFT 9 /* 512 bytes */
|
|
#define DN_MIN_INDBLKSHIFT 12 /* 4k */
|
|
/*
|
|
* If we ever increase this value beyond 20, we need to revisit all logic that
|
|
* does x << level * ebps to handle overflow. With a 1M indirect block size,
|
|
* 4 levels of indirect blocks would not be able to guarantee addressing an
|
|
* entire object, so 5 levels will be used, but 5 * (20 - 7) = 65.
|
|
*/
|
|
#define DN_MAX_INDBLKSHIFT 17 /* 128k */
|
|
#define DNODE_BLOCK_SHIFT 14 /* 16k */
|
|
#define DNODE_CORE_SIZE 64 /* 64 bytes for dnode sans blkptrs */
|
|
#define DN_MAX_OBJECT_SHIFT 48 /* 256 trillion (zfs_fid_t limit) */
|
|
#define DN_MAX_OFFSET_SHIFT 64 /* 2^64 bytes in a dnode */
|
|
|
|
/*
|
|
* dnode id flags
|
|
*
|
|
* Note: a file will never ever have its ids moved from bonus->spill
|
|
*/
|
|
#define DN_ID_CHKED_BONUS 0x1
|
|
#define DN_ID_CHKED_SPILL 0x2
|
|
#define DN_ID_OLD_EXIST 0x4
|
|
#define DN_ID_NEW_EXIST 0x8
|
|
|
|
/*
|
|
* Derived constants.
|
|
*/
|
|
#define DNODE_MIN_SIZE (1 << DNODE_SHIFT)
|
|
#define DNODE_MAX_SIZE (1 << DNODE_BLOCK_SHIFT)
|
|
#define DNODE_BLOCK_SIZE (1 << DNODE_BLOCK_SHIFT)
|
|
#define DNODE_MIN_SLOTS (DNODE_MIN_SIZE >> DNODE_SHIFT)
|
|
#define DNODE_MAX_SLOTS (DNODE_MAX_SIZE >> DNODE_SHIFT)
|
|
#define DN_BONUS_SIZE(dnsize) ((dnsize) - DNODE_CORE_SIZE - \
|
|
(1 << SPA_BLKPTRSHIFT))
|
|
#define DN_SLOTS_TO_BONUSLEN(slots) DN_BONUS_SIZE((slots) << DNODE_SHIFT)
|
|
#define DN_OLD_MAX_BONUSLEN (DN_BONUS_SIZE(DNODE_MIN_SIZE))
|
|
#define DN_MAX_NBLKPTR ((DNODE_MIN_SIZE - DNODE_CORE_SIZE) >> SPA_BLKPTRSHIFT)
|
|
#define DN_MAX_OBJECT (1ULL << DN_MAX_OBJECT_SHIFT)
|
|
#define DN_ZERO_BONUSLEN (DN_BONUS_SIZE(DNODE_MAX_SIZE) + 1)
|
|
#define DN_KILL_SPILLBLK (1)
|
|
|
|
#define DN_SLOT_UNINIT ((void *)NULL) /* Uninitialized */
|
|
#define DN_SLOT_FREE ((void *)1UL) /* Free slot */
|
|
#define DN_SLOT_ALLOCATED ((void *)2UL) /* Allocated slot */
|
|
#define DN_SLOT_INTERIOR ((void *)3UL) /* Interior allocated slot */
|
|
#define DN_SLOT_IS_PTR(dn) ((void *)dn > DN_SLOT_INTERIOR)
|
|
#define DN_SLOT_IS_VALID(dn) ((void *)dn != NULL)
|
|
|
|
#define DNODES_PER_BLOCK_SHIFT (DNODE_BLOCK_SHIFT - DNODE_SHIFT)
|
|
#define DNODES_PER_BLOCK (1ULL << DNODES_PER_BLOCK_SHIFT)
|
|
|
|
/*
|
|
* This is inaccurate if the indblkshift of the particular object is not the
|
|
* max. But it's only used by userland to calculate the zvol reservation.
|
|
*/
|
|
#define DNODES_PER_LEVEL_SHIFT (DN_MAX_INDBLKSHIFT - SPA_BLKPTRSHIFT)
|
|
#define DNODES_PER_LEVEL (1ULL << DNODES_PER_LEVEL_SHIFT)
|
|
|
|
#define DN_MAX_LEVELS (DIV_ROUND_UP(DN_MAX_OFFSET_SHIFT - SPA_MINBLOCKSHIFT, \
|
|
DN_MIN_INDBLKSHIFT - SPA_BLKPTRSHIFT) + 1)
|
|
|
|
#define DN_BONUS(dnp) ((void*)((dnp)->dn_bonus + \
|
|
(((dnp)->dn_nblkptr - 1) * sizeof (blkptr_t))))
|
|
#define DN_MAX_BONUS_LEN(dnp) \
|
|
((dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) ? \
|
|
(uint8_t *)DN_SPILL_BLKPTR(dnp) - (uint8_t *)DN_BONUS(dnp) : \
|
|
(uint8_t *)(dnp + (dnp->dn_extra_slots + 1)) - (uint8_t *)DN_BONUS(dnp))
|
|
|
|
#define DN_USED_BYTES(dnp) (((dnp)->dn_flags & DNODE_FLAG_USED_BYTES) ? \
|
|
(dnp)->dn_used : (dnp)->dn_used << SPA_MINBLOCKSHIFT)
|
|
|
|
#define EPB(blkshift, typeshift) (1 << (blkshift - typeshift))
|
|
|
|
struct dmu_buf_impl;
|
|
struct objset;
|
|
struct zio;
|
|
|
|
enum dnode_dirtycontext {
|
|
DN_UNDIRTIED,
|
|
DN_DIRTY_OPEN,
|
|
DN_DIRTY_SYNC
|
|
};
|
|
|
|
/* Is dn_used in bytes? if not, it's in multiples of SPA_MINBLOCKSIZE */
|
|
#define DNODE_FLAG_USED_BYTES (1 << 0)
|
|
#define DNODE_FLAG_USERUSED_ACCOUNTED (1 << 1)
|
|
|
|
/* Does dnode have a SA spill blkptr in bonus? */
|
|
#define DNODE_FLAG_SPILL_BLKPTR (1 << 2)
|
|
|
|
/* User/Group/Project dnode accounting */
|
|
#define DNODE_FLAG_USEROBJUSED_ACCOUNTED (1 << 3)
|
|
|
|
/*
|
|
* This mask defines the set of flags which are "portable", meaning
|
|
* that they can be preserved when doing a raw encrypted zfs send.
|
|
* Flags included in this mask will be protected by AAD when the block
|
|
* of dnodes is encrypted.
|
|
*/
|
|
#define DNODE_CRYPT_PORTABLE_FLAGS_MASK (DNODE_FLAG_SPILL_BLKPTR)
|
|
|
|
/*
|
|
* VARIABLE-LENGTH (LARGE) DNODES
|
|
*
|
|
* The motivation for variable-length dnodes is to eliminate the overhead
|
|
* associated with using spill blocks. Spill blocks are used to store
|
|
* system attribute data (i.e. file metadata) that does not fit in the
|
|
* dnode's bonus buffer. By allowing a larger bonus buffer area the use of
|
|
* a spill block can be avoided. Spill blocks potentially incur an
|
|
* additional read I/O for every dnode in a dnode block. As a worst case
|
|
* example, reading 32 dnodes from a 16k dnode block and all of the spill
|
|
* blocks could issue 33 separate reads. Now suppose those dnodes have size
|
|
* 1024 and therefore don't need spill blocks. Then the worst case number
|
|
* of blocks read is reduced to from 33 to two--one per dnode block.
|
|
*
|
|
* ZFS-on-Linux systems that make heavy use of extended attributes benefit
|
|
* from this feature. In particular, ZFS-on-Linux supports the xattr=sa
|
|
* dataset property which allows file extended attribute data to be stored
|
|
* in the dnode bonus buffer as an alternative to the traditional
|
|
* directory-based format. Workloads such as SELinux and the Lustre
|
|
* distributed filesystem often store enough xattr data to force spill
|
|
* blocks when xattr=sa is in effect. Large dnodes may therefore provide a
|
|
* performance benefit to such systems. Other use cases that benefit from
|
|
* this feature include files with large ACLs and symbolic links with long
|
|
* target names.
|
|
*
|
|
* The size of a dnode may be a multiple of 512 bytes up to the size of a
|
|
* dnode block (currently 16384 bytes). The dn_extra_slots field of the
|
|
* on-disk dnode_phys_t structure describes the size of the physical dnode
|
|
* on disk. The field represents how many "extra" dnode_phys_t slots a
|
|
* dnode consumes in its dnode block. This convention results in a value of
|
|
* 0 for 512 byte dnodes which preserves on-disk format compatibility with
|
|
* older software which doesn't support large dnodes.
|
|
*
|
|
* Similarly, the in-memory dnode_t structure has a dn_num_slots field
|
|
* to represent the total number of dnode_phys_t slots consumed on disk.
|
|
* Thus dn->dn_num_slots is 1 greater than the corresponding
|
|
* dnp->dn_extra_slots. This difference in convention was adopted
|
|
* because, unlike on-disk structures, backward compatibility is not a
|
|
* concern for in-memory objects, so we used a more natural way to
|
|
* represent size for a dnode_t.
|
|
*
|
|
* The default size for newly created dnodes is determined by the value of
|
|
* the "dnodesize" dataset property. By default the property is set to
|
|
* "legacy" which is compatible with older software. Setting the property
|
|
* to "auto" will allow the filesystem to choose the most suitable dnode
|
|
* size. Currently this just sets the default dnode size to 1k, but future
|
|
* code improvements could dynamically choose a size based on observed
|
|
* workload patterns. Dnodes of varying sizes can coexist within the same
|
|
* dataset and even within the same dnode block.
|
|
*/
|
|
|
|
typedef struct dnode_phys {
|
|
uint8_t dn_type; /* dmu_object_type_t */
|
|
uint8_t dn_indblkshift; /* ln2(indirect block size) */
|
|
uint8_t dn_nlevels; /* 1=dn_blkptr->data blocks */
|
|
uint8_t dn_nblkptr; /* length of dn_blkptr */
|
|
uint8_t dn_bonustype; /* type of data in bonus buffer */
|
|
uint8_t dn_checksum; /* ZIO_CHECKSUM type */
|
|
uint8_t dn_compress; /* ZIO_COMPRESS type */
|
|
uint8_t dn_flags; /* DNODE_FLAG_* */
|
|
uint16_t dn_datablkszsec; /* data block size in 512b sectors */
|
|
uint16_t dn_bonuslen; /* length of dn_bonus */
|
|
uint8_t dn_extra_slots; /* # of subsequent slots consumed */
|
|
uint8_t dn_pad2[3];
|
|
|
|
/* accounting is protected by dn_dirty_mtx */
|
|
uint64_t dn_maxblkid; /* largest allocated block ID */
|
|
uint64_t dn_used; /* bytes (or sectors) of disk space */
|
|
|
|
/*
|
|
* Both dn_pad2 and dn_pad3 are protected by the block's MAC. This
|
|
* allows us to protect any fields that might be added here in the
|
|
* future. In either case, developers will want to check
|
|
* zio_crypt_init_uios_dnode() to ensure the new field is being
|
|
* protected properly.
|
|
*/
|
|
uint64_t dn_pad3[4];
|
|
|
|
/*
|
|
* The tail region is 448 bytes for a 512 byte dnode, and
|
|
* correspondingly larger for larger dnode sizes. The spill
|
|
* block pointer, when present, is always at the end of the tail
|
|
* region. There are three ways this space may be used, using
|
|
* a 512 byte dnode for this diagram:
|
|
*
|
|
* 0 64 128 192 256 320 384 448 (offset)
|
|
* +---------------+---------------+---------------+-------+
|
|
* | dn_blkptr[0] | dn_blkptr[1] | dn_blkptr[2] | / |
|
|
* +---------------+---------------+---------------+-------+
|
|
* | dn_blkptr[0] | dn_bonus[0..319] |
|
|
* +---------------+-----------------------+---------------+
|
|
* | dn_blkptr[0] | dn_bonus[0..191] | dn_spill |
|
|
* +---------------+-----------------------+---------------+
|
|
*/
|
|
union {
|
|
blkptr_t dn_blkptr[1+DN_OLD_MAX_BONUSLEN/sizeof (blkptr_t)];
|
|
struct {
|
|
blkptr_t __dn_ignore1;
|
|
uint8_t dn_bonus[DN_OLD_MAX_BONUSLEN];
|
|
};
|
|
struct {
|
|
blkptr_t __dn_ignore2;
|
|
uint8_t __dn_ignore3[DN_OLD_MAX_BONUSLEN -
|
|
sizeof (blkptr_t)];
|
|
blkptr_t dn_spill;
|
|
};
|
|
};
|
|
} dnode_phys_t;
|
|
|
|
#define DN_SPILL_BLKPTR(dnp) (blkptr_t *)((char *)(dnp) + \
|
|
(((dnp)->dn_extra_slots + 1) << DNODE_SHIFT) - (1 << SPA_BLKPTRSHIFT))
|
|
|
|
struct dnode {
|
|
/*
|
|
* Protects the structure of the dnode, including the number of levels
|
|
* of indirection (dn_nlevels), dn_maxblkid, and dn_next_*
|
|
*/
|
|
krwlock_t dn_struct_rwlock;
|
|
|
|
/* Our link on dn_objset->os_dnodes list; protected by os_lock. */
|
|
list_node_t dn_link;
|
|
|
|
/* immutable: */
|
|
struct objset *dn_objset;
|
|
uint64_t dn_object;
|
|
struct dmu_buf_impl *dn_dbuf;
|
|
struct dnode_handle *dn_handle;
|
|
dnode_phys_t *dn_phys; /* pointer into dn->dn_dbuf->db.db_data */
|
|
|
|
/*
|
|
* Copies of stuff in dn_phys. They're valid in the open
|
|
* context (eg. even before the dnode is first synced).
|
|
* Where necessary, these are protected by dn_struct_rwlock.
|
|
*/
|
|
dmu_object_type_t dn_type; /* object type */
|
|
uint16_t dn_bonuslen; /* bonus length */
|
|
uint8_t dn_bonustype; /* bonus type */
|
|
uint8_t dn_nblkptr; /* number of blkptrs (immutable) */
|
|
uint8_t dn_checksum; /* ZIO_CHECKSUM type */
|
|
uint8_t dn_compress; /* ZIO_COMPRESS type */
|
|
uint8_t dn_nlevels;
|
|
uint8_t dn_indblkshift;
|
|
uint8_t dn_datablkshift; /* zero if blksz not power of 2! */
|
|
uint8_t dn_moved; /* Has this dnode been moved? */
|
|
uint16_t dn_datablkszsec; /* in 512b sectors */
|
|
uint32_t dn_datablksz; /* in bytes */
|
|
uint64_t dn_maxblkid;
|
|
uint8_t dn_next_type[TXG_SIZE];
|
|
uint8_t dn_num_slots; /* metadnode slots consumed on disk */
|
|
uint8_t dn_next_nblkptr[TXG_SIZE];
|
|
uint8_t dn_next_nlevels[TXG_SIZE];
|
|
uint8_t dn_next_indblkshift[TXG_SIZE];
|
|
uint8_t dn_next_bonustype[TXG_SIZE];
|
|
uint8_t dn_rm_spillblk[TXG_SIZE]; /* for removing spill blk */
|
|
uint16_t dn_next_bonuslen[TXG_SIZE];
|
|
uint32_t dn_next_blksz[TXG_SIZE]; /* next block size in bytes */
|
|
uint64_t dn_next_maxblkid[TXG_SIZE]; /* next maxblkid in bytes */
|
|
|
|
/* protected by dn_dbufs_mtx; declared here to fill 32-bit hole */
|
|
uint32_t dn_dbufs_count; /* count of dn_dbufs */
|
|
|
|
/* protected by os_lock: */
|
|
multilist_node_t dn_dirty_link[TXG_SIZE]; /* next on dataset's dirty */
|
|
|
|
/* protected by dn_mtx: */
|
|
kmutex_t dn_mtx;
|
|
list_t dn_dirty_records[TXG_SIZE];
|
|
struct range_tree *dn_free_ranges[TXG_SIZE];
|
|
uint64_t dn_allocated_txg;
|
|
uint64_t dn_free_txg;
|
|
uint64_t dn_assigned_txg;
|
|
uint64_t dn_dirty_txg; /* txg dnode was last dirtied */
|
|
kcondvar_t dn_notxholds;
|
|
enum dnode_dirtycontext dn_dirtyctx;
|
|
uint8_t *dn_dirtyctx_firstset; /* dbg: contents meaningless */
|
|
|
|
/* protected by own devices */
|
|
refcount_t dn_tx_holds;
|
|
refcount_t dn_holds;
|
|
|
|
kmutex_t dn_dbufs_mtx;
|
|
/*
|
|
* Descendent dbufs, ordered by dbuf_compare. Note that dn_dbufs
|
|
* can contain multiple dbufs of the same (level, blkid) when a
|
|
* dbuf is marked DB_EVICTING without being removed from
|
|
* dn_dbufs. To maintain the avl invariant that there cannot be
|
|
* duplicate entries, we order the dbufs by an arbitrary value -
|
|
* their address in memory. This means that dn_dbufs cannot be used to
|
|
* directly look up a dbuf. Instead, callers must use avl_walk, have
|
|
* a reference to the dbuf, or look up a non-existent node with
|
|
* db_state = DB_SEARCH (see dbuf_free_range for an example).
|
|
*/
|
|
avl_tree_t dn_dbufs;
|
|
|
|
/* protected by dn_struct_rwlock */
|
|
struct dmu_buf_impl *dn_bonus; /* bonus buffer dbuf */
|
|
|
|
boolean_t dn_have_spill; /* have spill or are spilling */
|
|
|
|
/* parent IO for current sync write */
|
|
zio_t *dn_zio;
|
|
|
|
/* used in syncing context */
|
|
uint64_t dn_oldused; /* old phys used bytes */
|
|
uint64_t dn_oldflags; /* old phys dn_flags */
|
|
uint64_t dn_olduid, dn_oldgid, dn_oldprojid;
|
|
uint64_t dn_newuid, dn_newgid, dn_newprojid;
|
|
int dn_id_flags;
|
|
|
|
/* holds prefetch structure */
|
|
struct zfetch dn_zfetch;
|
|
};
|
|
|
|
/*
|
|
* Adds a level of indirection between the dbuf and the dnode to avoid
|
|
* iterating descendent dbufs in dnode_move(). Handles are not allocated
|
|
* individually, but as an array of child dnodes in dnode_hold_impl().
|
|
*/
|
|
typedef struct dnode_handle {
|
|
/* Protects dnh_dnode from modification by dnode_move(). */
|
|
zrlock_t dnh_zrlock;
|
|
dnode_t *dnh_dnode;
|
|
} dnode_handle_t;
|
|
|
|
typedef struct dnode_children {
|
|
dmu_buf_user_t dnc_dbu; /* User evict data */
|
|
size_t dnc_count; /* number of children */
|
|
dnode_handle_t dnc_children[]; /* sized dynamically */
|
|
} dnode_children_t;
|
|
|
|
typedef struct free_range {
|
|
avl_node_t fr_node;
|
|
uint64_t fr_blkid;
|
|
uint64_t fr_nblks;
|
|
} free_range_t;
|
|
|
|
void dnode_special_open(struct objset *dd, dnode_phys_t *dnp,
|
|
uint64_t object, dnode_handle_t *dnh);
|
|
void dnode_special_close(dnode_handle_t *dnh);
|
|
|
|
void dnode_setbonuslen(dnode_t *dn, int newsize, dmu_tx_t *tx);
|
|
void dnode_setbonus_type(dnode_t *dn, dmu_object_type_t, dmu_tx_t *tx);
|
|
void dnode_rm_spill(dnode_t *dn, dmu_tx_t *tx);
|
|
|
|
int dnode_hold(struct objset *dd, uint64_t object,
|
|
void *ref, dnode_t **dnp);
|
|
int dnode_hold_impl(struct objset *dd, uint64_t object, int flag, int dn_slots,
|
|
void *ref, dnode_t **dnp);
|
|
boolean_t dnode_add_ref(dnode_t *dn, void *ref);
|
|
void dnode_rele(dnode_t *dn, void *ref);
|
|
void dnode_rele_and_unlock(dnode_t *dn, void *tag);
|
|
void dnode_setdirty(dnode_t *dn, dmu_tx_t *tx);
|
|
void dnode_sync(dnode_t *dn, dmu_tx_t *tx);
|
|
void dnode_allocate(dnode_t *dn, dmu_object_type_t ot, int blocksize, int ibs,
|
|
dmu_object_type_t bonustype, int bonuslen, int dn_slots, dmu_tx_t *tx);
|
|
void dnode_reallocate(dnode_t *dn, dmu_object_type_t ot, int blocksize,
|
|
dmu_object_type_t bonustype, int bonuslen, int dn_slots, dmu_tx_t *tx);
|
|
void dnode_free(dnode_t *dn, dmu_tx_t *tx);
|
|
void dnode_byteswap(dnode_phys_t *dnp);
|
|
void dnode_buf_byteswap(void *buf, size_t size);
|
|
void dnode_verify(dnode_t *dn);
|
|
int dnode_set_nlevels(dnode_t *dn, int nlevels, dmu_tx_t *tx);
|
|
int dnode_set_blksz(dnode_t *dn, uint64_t size, int ibs, dmu_tx_t *tx);
|
|
void dnode_free_range(dnode_t *dn, uint64_t off, uint64_t len, dmu_tx_t *tx);
|
|
void dnode_diduse_space(dnode_t *dn, int64_t space);
|
|
void dnode_new_blkid(dnode_t *dn, uint64_t blkid, dmu_tx_t *tx, boolean_t);
|
|
uint64_t dnode_block_freed(dnode_t *dn, uint64_t blkid);
|
|
void dnode_init(void);
|
|
void dnode_fini(void);
|
|
int dnode_next_offset(dnode_t *dn, int flags, uint64_t *off,
|
|
int minlvl, uint64_t blkfill, uint64_t txg);
|
|
void dnode_evict_dbufs(dnode_t *dn);
|
|
void dnode_evict_bonus(dnode_t *dn);
|
|
void dnode_free_interior_slots(dnode_t *dn);
|
|
boolean_t dnode_needs_remap(const dnode_t *dn);
|
|
|
|
#define DNODE_IS_DIRTY(_dn) \
|
|
((_dn)->dn_dirty_txg >= spa_syncing_txg((_dn)->dn_objset->os_spa))
|
|
|
|
#define DNODE_IS_CACHEABLE(_dn) \
|
|
((_dn)->dn_objset->os_primary_cache == ZFS_CACHE_ALL || \
|
|
(DMU_OT_IS_METADATA((_dn)->dn_type) && \
|
|
(_dn)->dn_objset->os_primary_cache == ZFS_CACHE_METADATA))
|
|
|
|
#define DNODE_META_IS_CACHEABLE(_dn) \
|
|
((_dn)->dn_objset->os_primary_cache == ZFS_CACHE_ALL || \
|
|
(_dn)->dn_objset->os_primary_cache == ZFS_CACHE_METADATA)
|
|
|
|
/*
|
|
* Used for dnodestats kstat.
|
|
*/
|
|
typedef struct dnode_stats {
|
|
/*
|
|
* Number of failed attempts to hold a meta dnode dbuf.
|
|
*/
|
|
kstat_named_t dnode_hold_dbuf_hold;
|
|
/*
|
|
* Number of failed attempts to read a meta dnode dbuf.
|
|
*/
|
|
kstat_named_t dnode_hold_dbuf_read;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) was able
|
|
* to hold the requested object number which was allocated. This is
|
|
* the common case when looking up any allocated object number.
|
|
*/
|
|
kstat_named_t dnode_hold_alloc_hits;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) was not
|
|
* able to hold the request object number because it was not allocated.
|
|
*/
|
|
kstat_named_t dnode_hold_alloc_misses;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) was not
|
|
* able to hold the request object number because the object number
|
|
* refers to an interior large dnode slot.
|
|
*/
|
|
kstat_named_t dnode_hold_alloc_interior;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) needed
|
|
* to retry acquiring slot zrl locks due to contention.
|
|
*/
|
|
kstat_named_t dnode_hold_alloc_lock_retry;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) did not
|
|
* need to create the dnode because another thread did so after
|
|
* dropping the read lock but before acquiring the write lock.
|
|
*/
|
|
kstat_named_t dnode_hold_alloc_lock_misses;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_ALLOCATED) found
|
|
* a free dnode instantiated by dnode_create() but not yet allocated
|
|
* by dnode_allocate().
|
|
*/
|
|
kstat_named_t dnode_hold_alloc_type_none;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_FREE) was able
|
|
* to hold the requested range of free dnode slots.
|
|
*/
|
|
kstat_named_t dnode_hold_free_hits;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_FREE) was not
|
|
* able to hold the requested range of free dnode slots because
|
|
* at least one slot was allocated.
|
|
*/
|
|
kstat_named_t dnode_hold_free_misses;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_FREE) was not
|
|
* able to hold the requested range of free dnode slots because
|
|
* after acquiring the zrl lock at least one slot was allocated.
|
|
*/
|
|
kstat_named_t dnode_hold_free_lock_misses;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_FREE) needed
|
|
* to retry acquiring slot zrl locks due to contention.
|
|
*/
|
|
kstat_named_t dnode_hold_free_lock_retry;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_FREE) requested
|
|
* a range of dnode slots which were held by another thread.
|
|
*/
|
|
kstat_named_t dnode_hold_free_refcount;
|
|
/*
|
|
* Number of times dnode_hold(..., DNODE_MUST_BE_FREE) requested
|
|
* a range of dnode slots which would overflow the dnode_phys_t.
|
|
*/
|
|
kstat_named_t dnode_hold_free_overflow;
|
|
/*
|
|
* Number of times a dnode_hold(...) was attempted on a dnode
|
|
* which had already been unlinked in an earlier txg.
|
|
*/
|
|
kstat_named_t dnode_hold_free_txg;
|
|
/*
|
|
* Number of times dnode_free_interior_slots() needed to retry
|
|
* acquiring a slot zrl lock due to contention.
|
|
*/
|
|
kstat_named_t dnode_free_interior_lock_retry;
|
|
/*
|
|
* Number of new dnodes allocated by dnode_allocate().
|
|
*/
|
|
kstat_named_t dnode_allocate;
|
|
/*
|
|
* Number of dnodes re-allocated by dnode_reallocate().
|
|
*/
|
|
kstat_named_t dnode_reallocate;
|
|
/*
|
|
* Number of meta dnode dbufs evicted.
|
|
*/
|
|
kstat_named_t dnode_buf_evict;
|
|
/*
|
|
* Number of times dmu_object_alloc*() reached the end of the existing
|
|
* object ID chunk and advanced to a new one.
|
|
*/
|
|
kstat_named_t dnode_alloc_next_chunk;
|
|
/*
|
|
* Number of times multiple threads attempted to allocate a dnode
|
|
* from the same block of free dnodes.
|
|
*/
|
|
kstat_named_t dnode_alloc_race;
|
|
/*
|
|
* Number of times dmu_object_alloc*() was forced to advance to the
|
|
* next meta dnode dbuf due to an error from dmu_object_next().
|
|
*/
|
|
kstat_named_t dnode_alloc_next_block;
|
|
/*
|
|
* Statistics for tracking dnodes which have been moved.
|
|
*/
|
|
kstat_named_t dnode_move_invalid;
|
|
kstat_named_t dnode_move_recheck1;
|
|
kstat_named_t dnode_move_recheck2;
|
|
kstat_named_t dnode_move_special;
|
|
kstat_named_t dnode_move_handle;
|
|
kstat_named_t dnode_move_rwlock;
|
|
kstat_named_t dnode_move_active;
|
|
} dnode_stats_t;
|
|
|
|
extern dnode_stats_t dnode_stats;
|
|
|
|
#define DNODE_STAT_INCR(stat, val) \
|
|
atomic_add_64(&dnode_stats.stat.value.ui64, (val));
|
|
#define DNODE_STAT_BUMP(stat) \
|
|
DNODE_STAT_INCR(stat, 1);
|
|
|
|
#ifdef ZFS_DEBUG
|
|
|
|
/*
|
|
* There should be a ## between the string literal and fmt, to make it
|
|
* clear that we're joining two strings together, but that piece of shit
|
|
* gcc doesn't support that preprocessor token.
|
|
*/
|
|
#define dprintf_dnode(dn, fmt, ...) do { \
|
|
if (zfs_flags & ZFS_DEBUG_DPRINTF) { \
|
|
char __db_buf[32]; \
|
|
uint64_t __db_obj = (dn)->dn_object; \
|
|
if (__db_obj == DMU_META_DNODE_OBJECT) \
|
|
(void) strcpy(__db_buf, "mdn"); \
|
|
else \
|
|
(void) snprintf(__db_buf, sizeof (__db_buf), "%lld", \
|
|
(u_longlong_t)__db_obj);\
|
|
dprintf_ds((dn)->dn_objset->os_dsl_dataset, "obj=%s " fmt, \
|
|
__db_buf, __VA_ARGS__); \
|
|
} \
|
|
_NOTE(CONSTCOND) } while (0)
|
|
|
|
#define DNODE_VERIFY(dn) dnode_verify(dn)
|
|
#define FREE_VERIFY(db, start, end, tx) free_verify(db, start, end, tx)
|
|
|
|
#else
|
|
|
|
#define dprintf_dnode(db, fmt, ...)
|
|
#define DNODE_VERIFY(dn)
|
|
#define FREE_VERIFY(db, start, end, tx)
|
|
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* _SYS_DNODE_H */
|